 | Up a level |
Abbasi, U and Chowdhury, P and Subramanian, S and Jain, P and Muthe, N and sheikh, F and Banerjee, S and Kumaran, V (2019) cartridge based Point-of-Care device for complete blood count. Scientific Reports. pp. 1-16. ISSN 20452322
Alex, S and Kumar, P R and Chattopadhyay, K and Barshilia, Harish C and Basu, B (2019) Thermally evaporated Cu–Al thin film coated flexible glass mirror for concentrated solar power applications. Materials Chemistry and Physics, 232. pp. 221-228. ISSN 02540584
Anand Kumar, KS and Sachin, Kumar and Saket, RK and Rajendran, R (2019) Technological aspects of microbial fuel cells and soil based green energy conversion system. GMSARN International Journal, 13 (4). pp. 159-170. ISSN 19059094
Antony Jeyaseelan, A and Rangappa, D and Dutta, Soma (2019) Double doping effect on ferroelectric and leakage current behavior of Pb(Zr0.52Ti0.48)O3 thin film. Ceramics International, 45 (18). pp. 25027-25033.
Arun, S and Marbaniang, B and Borgohain, B and Kanagaraj, S (2019) Rehabilitation evaluation of the newly developed polymeric based passive polycentric knee joint. Disability and Rehabilitation: Assistive Technology, 15 (8). pp. 871-877. ISSN 17483107
Aruna, ST and Kiran, A and Shilpa, M (2019) Reclamation of thermal power plant waste as a distributed phase in electrodeposited Ni composite coating. Surface Engineering, 35 (12). pp. 1042-1047.
Atchuta, SR and Sakthivel, S and Barshilia, Harish C (2019) Nickel doped cobaltite spinel as a solar selective absorber coating for efficient photothermal conversion with a low thermal radiative loss at high operating temperatures. Solar Energy Materials and Solar Cells, 200. ISSN 09270248
Avinash, J and Bhovi, PM and Venkateswarlu, K (2019) Microstructure and mechanical properties evolution of aa 2024 alloy subjected to RCS. Indian Journal of Engineering and Materials Sciences, 26 (2). pp. 155-160. ISSN 09714588
Babu, MD and JeevithaShree, DV and Prabhakar, G and Saluja, KPS and Pashilkar, AA and Biswas, P (2019) Estimating pilots' cognitive load from ocular parameters through simulation and in-flight studies. Journal of Eye Movement Research, 12 (3). pp. 1-16. ISSN 19958692
Baidya, T and Murayama, T and Nellaiappan, S and Katiyar, NK and Bera, Parthasarathi and Safonova, O and Lin, M and Priolkar, KR and Kundu, S and Srinivasa Rao, B and Steiger, P and Sharma, S and Biswas, K. and Pradhan, SK and Lingaiah, N and Malviya, KD and Haruta, M (2019) Ultra-Low-Temperature CO Oxidation Activity of Octahedral Site Cobalt Species in Co3O4 Based Catalysts: Unravelling the Origin of the Unique Catalytic Property. Journal of Physical Chemistry C, 123 (32). pp. 19557-19571. ISSN 19327447
Barat, K and Das, G and Bharathy, S and Ghosh, M (2019) Compositional optimization of a commercially produced ferritic steel using microstructural heterogeneity and mechanical properties. Materials Performance and Characterization, 8 (1). pp. 566-581. ISSN 2379-1365
Barat, K and Shivaprasad, S and Kar, SK and Tarafder, S (2019) Low-cycle fatigue of IN 718: Effect of waveform. Fatigue and Fracture of Engineering Materials and Structures, 42 (12). pp. 2823-2843. ISSN 8756758X
Barat, K and Venkateswarlu, K (2019) Laser material interaction parameter: New tool for developing property diagrams for welds. Journal of Laser Applications, 31 (3). ISSN 1042346X
Barshilia, Harish C (2019) Transition metal based CuxNiyCoz-x-yO4 spinel composite solar selective absorber coatings for concentrated solar thermal applications. Solar Energy Materials and Solar Cells, 189. pp. 226-232.
Bonu, V and Jeevitha, M and Praveen Kumar, V and Barshilia, Harish C (2019) Nanolayered multilayer Ti/TiN coatings: Role of bi-layer thickness and annealing on solid particle erosion behaviour at elevated temperature. Surface and Coatings Technology, 357. pp. 204-211. ISSN 02578972
Bonu, V and Sahu, BK and Das, A and Amirthapandian, S and Dhara, S and Barshilia, Harish C (2019) Sub-wavelength waveguide properties of 1D and surfacefunctionalized SnO 2 nanostructures of various morphologies. Beilstein Journal of Nanotechnology, 9 (1). pp. 379-388. ISSN 21904286
Borkar, S and Muthu, K and Arunkumar, GL and Ashok Kumar, K (2019) Fabrication and experimentation of diffuser augmented wind turbine. International Journal of Recent Technology and Engineering, 8 (2). pp. 6047-6052. ISSN 22773878
Chidambaranathan, M and Verma, SB and Rathakrishnan, E (2019) Control of incident shock-induced boundary-layer separation using steady micro-jet actuators at M∞ = 3.5. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 233 (4). pp. 1284-1306. ISSN 09544100
Christiyan, KGJ and Chandrasekhar, U and Venkateswarlu, K (2019) Investigation on the mechanical properties of PLA & its composite fabricated through advanced fusion plastic modelling. Journal of Mechanical Engineering Research and Developments, 42 (3). pp. 47-54. ISSN 10241752
Dan, A and Soum-Glaude, A and Carling-Plaza, A and Ho, CK and Chattopadhyay, K and Barshilia, Harish C and Basu, B (2019) Temperature- And Angle-Dependent Emissivity and Thermal Shock Resistance of the W/WAlN/WAlON/Al2O3-Based Spectrally Selective Absorber. ACS Applied Energy Materials, 2 (8). pp. 5557-5567. ISSN 25740962
Das, R and Joshi, SS and Barshilia, Harish C (2019) Analytical model of progression of flank wear land width in drilling. Journal of Tribology, 141 (1). pp. 1-9. ISSN 07424787
Datta, A and Augustin, MJ and Gupta, Nitesh and Viswamurthy, SR and Gaddikeri, KM and Sundaram, Ramesh (2019) Impact Localization and Severity Estimation on Composite Structure Using Fiber Bragg Grating Sensors by Least Square Support Vector Regression. IEEE Sensors Journal, 19 (12). pp. 4463-4470. ISSN 1530437X
De, MM and Mathur, JS and Vengadesan, S (2019) Simulation of flapping wings subjected to gusty inflow. Aeronautical Journal, 123 (1266). pp. 1170-1192. ISSN 00019240
De, Manabendra M and Mathur, JS and Vengadesan, S (2019) Recurrence studies of insect-sized flapping wings in inclined-stroke plane under gusty conditions. Sadhana - Academy Proceedings in Engineering Sciences, 44 (3). pp. 1-17. ISSN 02562499
Deshpande, P J and Modani, A (2019) Experimental investigation of fluid–structure interaction in a bird-like flapping wing. Journal of Fluids and Structures, 91. ISSN 08899746
Dutta, S and Karmakar, A and Roy, H and Barat, K (2019) Automatic estimation of mechanical properties from fractographs using optimal anisotropic diffusion and Voronoi tessellation. Measurement: Journal of the International Measurement Confederation, 134. pp. 574-585. ISSN 02632241
Felix, J and Rajendran, R and Kumar, GN and Babu, YG and Karthik, MK and Ramesha, DK (2019) Experimental and Numerical Investigation of Effusion Cooling Performance Over Combustor Liner Flat Plate Model. Heat Transfer Engineering, 40 (15). pp. 1-14. ISSN 01457632
Harish, DVN and Bharatish, A and Narasimha Murthy, HN and Anand, B and Rangaraj, L (2019) Evaluation of nanosecond laser ablation and scratch resistance of tantalum carbide coated graphite substrates. Ceramics International, 45 (17). pp. 22578-22588. ISSN 02728842
Haritha, A H and Ramachandra Rao, R (2019) Sol-Gel synthesis and phase evolution studies of yttrium silicates. Ceramics International, 45 (18). pp. 24957-24964.
Jalaja, MA and Dutta, Soma (2019) Optically controlled polarization, photovoltaic and switchable diode behavior in multifunctional KBiFe2O5 composite film. Ceramics International, 45 (17). pp. 22553-22557. ISSN 02728842
Jarali, Chetan S and Chikkangoudar, RN and Patil, SF and Raja, S and Lu, YC and Fish, J (2019) Thermodynamically consistent approach for one-dimensional phenomenological modeling of shape memory alloys. International Journal for Multiscale Computational Engineering, 17 (4). pp. 429-446. ISSN 15431649
Kamalakannan, GM and Singh, GK and Ananda, CM (2019) Influence of thermal insulation and wind velocity on the SMA actuator for morphing applications. Journal of Mechanical Science and Technology, 33 (9). pp. 4459-4468. ISSN 1738494X
Kamali, C and Ozger, E (2019) Limitations of Flight Path Reconstruction techniques. Sadhana - Academy Proceedings in Engineering Sciences, 44 (2). pp. 1-15. ISSN 02562499
Kannan, R and Rangaraj, L (2019) Properties of C f /SiC-ZrB 2 -Ta x C y composite produced by reactive hot pressing and polymer impregnation pyrolysis (RHP/PIP). Journal of the European Ceramic Society, 39 (7). pp. 2257-2265. ISSN 09552219
Karmakar, A and Barat, K (2019) Effect of elasto-plastic compatibility of grains on void-initiation criteria in low-carbon steel. Philosophical Magazine Letters, 99 (7). pp. 261-273. ISSN 09500839
Kondaiah, P and Niranjan, K and John, S and Barshilia, Harish C (2019) Tantalum carbide based spectrally selective coatings for solar thermal absorber applications. Solar Energy Materials and Solar Cells, 198. pp. 26-34. ISSN 09270248
Kulkarni, PD and Jakeer, Khan and Barshilia, Harish C and Chowdhury, P (2019) Reduction in magnetic exchange bias in CoFe/FeMn/CoFe trilayers due to reduced pinned uncompensated moments in AFM layer. Journal of Magnetism and Magnetic Materials, 472. pp. 111-114.
Kumar, N and Deshpande, PJ and Dodamani, Ravi and Antony, R and Girish Prasad, M (2019) Interaction of two micro-propellers in coplanar and coaxial arrangement for UAV application. International Journal of Recent Technology and Engineering, 8 (2). pp. 5992-5995. ISSN 22773878
Kumar, S and Anand Kumar, KS and Kumar, S and Bharti, OP (2019) Probabilistic evaluation and design aspects for reliability enhancement of induction motor. International Journal of Reliability and Safety, 13 (4). pp. 267-290. ISSN 1479389X
Kumar, S and Onkar, AK and Maligappa, M (2019) Frequency domain approach for probabilistic flutter analysis using stochastic finite elements. Meccanica, 54 (14). pp. 2207-2225. ISSN 00256455
Kumbar, SS and Jarali, Chetan S and Talange, DB and Kumbar, RB (2019) Synthesis, comparison and analysis of graphene. Materials Today: Proceedings, 26. pp. 763-765. ISSN 22147853
Lakshmi, PG and Balaji, N and Anil Kumar, K and Ananthapadmanabhan, PV and Unnikrishnan, G and Senthil Kumar, S and Aruna, ST (2019) Solution combustion synthesis of calcia-magnesia-aluminosilicate powder and its interaction with yttria-stabilized zirconia and co-doped yttria-stabilized zirconia. Ceramic International, 45 (15). pp. 18255-18264. ISSN 18255–18264
Lakshmi, PG and Balaji, N and Kumar, KA and Ananthapadmanabhan, PV and Unnikrishnan, G and Senthil Kumar, S and Aruna, ST (2019) Solution combustion synthesis of calcia-magnesia-aluminosilicate powder and its interaction with yttria-stabilized zirconia and co-doped yttria-stabilized zirconia. Ceramics International, 45 (15). pp. 18255-18264. ISSN 02728842
Lakshmi, PG and Majithia, Sumil and Shwetha, V and Balaji, N and Aruna, ST (2019) Improved hot corrosion resistance of plasma sprayed YSZ/Gd2Zr2O7 thermal barrier coating over single layer YSZ. Materials Characterization, 147. pp. 199-206. ISSN 1044-5803
Lakshmi, RV and Bera, Parthasarathi and Chakradhar, RPS (2019) Enhanced microwave absorption properties of PMMA modified MnFe2O4-polyaniline nanocomposites. Physical Chemistry Chemical Physics, 21 (9). pp. 5068-5077. ISSN 14639076
Lakshmi, RV and Pal, K and Mandal, TK and Aruna, ST (2019) Multifunctional properties of ceria nanocubes synthesized by a hydrothermal method. Bulletin of Materials Science, 42 (5). pp. 1-8. ISSN 02504707
Lakshmi, RV and Pal, Kamalesh and Mandal, TK and Aruna, ST (2019) Multifunctional properties of ceria nanocubes synthesized by a hydrothermal method. Bulletin of Mate, 42 (5).
Madivalappa, S and Jali, VM and Jain, Anjana (2019) Dielectric Properties of γ-Iirradiated, Stretched, and Poled PVDF Thin Films. Macromolecular Symposia, 387 (1). pp. 1-6. ISSN 10221360
Manju, S and Mukherjee, Somenath (2019) Function space formulation of the 3-noded distorted Timoshenko metric beam element. Structural Engineering and Mechanics, 69 (6). pp. 615-626. ISSN 12254568
Matta, S and Kolanu, NR and Chinthapenta, V and Manjunatha, CM and Ramji, M (2019) Progressive damage analysis of adhesively bonded patch repaired carbon fibre–reinforced polymer specimen under compression involving cohesive zone model. International Journal of Damage Mechanics, 28 (10). pp. 1457-1489. ISSN 10567895
Nandana, MS and Bhat, KU and Manjunatha, CM (2019) Improved fatigue crack growth resistance by retrogression and re-aging heat treatment in 7010 aluminum alloy. Fatigue and Fracture of Engineering Materials and Structures, 42 (3). pp. 719-731. ISSN 8756758X
Naveen, V and Raja, S and Deshpande, Abhijit P (2019) A two-step approach for synthesis, characterization and analysis of dicyclopentadiene–urea formaldehyde–siloxane-based double-walled microcapsules used in self-healing composites. https://link.springer.com/article/10.1007/s12588-019-09247-2, 23 (2). pp. 157-169. ISSN 0972656X
Niranjan, K and Kondaiah, P and Srinivas, G and Barshilia, Harish C (2019) Optimization of W/WAlSiN/SiON/SiO2 tandem absorber consisting of double layer anti-reflection coating with broadband absorption in the solar spectrum region. Applied Surface Science, 496. ISSN 01694332
Pai, P and Pratyusha, PL and Naidu, VPS (2019) Geo-Localization of Target in 3-Dimensional Coordinate Using SRTM Data. Journal of The Institution of Engineers (India): Series B, 100 (1). pp. 53-60. ISSN 22502106
Polagangu, James and Mahesh, K and Byji, Varughese (2019) Estimation of failure load of composite bonded joints using 1D and 2D FE analysis and the mathematical equation of strain and bond energy in the adhesive layer. Mechanics of Advanced Materials and Structures, 26 (1). pp. 20-28. ISSN 15376494
Politova, ED and Golubko, NV and Kaleva, GM and Mosunov, AV and Panda, PK (2019) Structure, dielectric and ferroelectric properties of modified KNN perovskite ceramics. Ferroelectrics, 544 (1). pp. 96-103. ISSN 00150193
Politova, ED and Golubko, NV and Kaleva, GM and Mosunov, AV and Sadovskaya, NV and Yu Stefanovich, S and Kiselev, DA and Panda, PK (2019) Structure, ferroelectric and piezoelectric properties of KNN-based perovskite ceramics. Ferroelectrics, 538 (1). pp. 45-51. ISSN 00150193
Politova, ED and Golubko, NV and Kaleva, GM and Panda, PK (2019) Ferroelectric and local piezoelectric properties of modified KNN ceramics. Integrated Ferroelectrics, 196 (1). pp. 52-59. ISSN 10584587
Politova, ED and Strebkov, DA and Belkova, DA and Kaleva, GM and Panda, PK (2019) Relaxation effects in nonstoichiometric NBT-based ceramics. Defect and Diffusion Forum, 391. pp. 95-100. ISSN 10120386
Prakashaiah, BG and Nityananda Shetty, A and Amitha Rani, BE (2019) Improvement of Anticorrosion Properties of Epoxy Primer Coating on Aluminum Alloy 2024-T3 by Thiosemicarbazone Derivatives. JOM, 71 (12). pp. 4880-4890. ISSN 10474838
Puri, V and Barshilia, Harish C (2019) Electromagnetic shielding, magnetic and microwave absorbing properties of Polypyrrole/ Ba0.6Sr0.4Fe12O19 composite synthesized via in-situ polymerization technique. Journal of Alloys and Compounds, 777. pp. 627-637.
Rajak, P and Kulkarni, PD and Krishnan, M and Chowdhury, P and Bhattacharyya, S (2019) Spatially resolved structure and domain wall propagation in defect induced SmCo/Co exchange spring magnet. Journal of Magnetism and Magnetic Materials, 491. ISSN 03048853
Ramaiah, KV and Saikrishna, CN and Bhagyaraj, J and Gouthama, - and Bhaumik, SK (2019) Microstructure and functional behaviour of shape memory annealed Ni 24.7 Ti 50.3 Pd 25 and Ni 24.7 Ti 49.3 Pd 25 Sc 1 alloys. Materials Characterization, 148. pp. 345-359. ISSN 10445803
Rangaraj, L and Sagar, RV and Stalin, M and Raghavendra, K and Venkateswarlu, K (2019) Synthesis, Characterization, and Mechanical Properties Evaluation of Mg-Ti3AlC2 Composites Produced by Powder Metallurgy/Hot Pressing. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (8). pp. 3714-3723. ISSN 10735623
Shivaram, BS and Biradar, BS (2019) Assessing grey literature use by researchers of council for scientific and industrial research. Annals of Library and Information Studies, 66 (3). pp. 94-100.
Shivaram, BS and Biradar, BS (2019) Grey literature archiving pattern in open access (OA) repositories with special emphasis on Indian OA repositories. Electronic Library, 37 (1). pp. 95-107. ISSN 02640473
Shyamasundar, LB and Anil Kumar, V and Jhansi Rani, P (2019) Fine-tuning resource allocation of apache spark distributed multinode cluster for faster processing of network-trace data. International Journal of Advanced Computer Science and Applications, 10 (11). pp. 634-645. ISSN 2158107X
Sibin, K P and Barshilia, Harish C (2019) Optical properties of sputter deposited nanocrystalline CuO thin films. Thin Solid Films, 673. pp. 78-85.
Singh, S and Singh, V and Kumari, S and UdayaKumar, A and Bhanu prasad, VV (2019) A comparative study of tensile strength of Cf/SiC composites having single layer and multilayer interphases. Ceramics International, 45 (17). pp. 21193-21199. ISSN 02728842
Sivam, - and Verma, SB (2019) Study of vortex breakdown and pitch up on a compound delta wing. INCAS Bulletin, 11 (2). pp. 171-178. ISSN 20668201
Sreevidya, PV and Borole, UP and Gawade, T and Khan, Jakeer and Prajapat, C.L. and Kumar, Y and Barshilia, Harish C and Chowdhury, P (2019) Evolution of magnetoresistance behaviour at low temperatures in naturally oxidised specular spin valve systems. Journal of Magnetism and Magnetic Materials, 481. pp. 170-175. ISSN 03048853
Sreevidya, PV and Borole, UP and Gawade, T and Khan, Jakeer and Prajapat, C.L. and Yogesh, K and Barshilia, Harish C and Chowdhury, P (2019) MgO based specular spin valve with reversible minor loop and higher exchange bias for futuristic linear magnetic field sensor. Journal of Magnetism and Magnetic Materials, 486. ISSN 03048853
Srinathkumar, S (2019) Rotorcraft precision hover control in atmospheric turbulence via eigenstructure assignment. Journal of the American Helicopter Society, 64 (1). pp. 1-12. ISSN 00028711
Srivastava, Meenu and Jadhav, M and Chetan, Kumar and Chakradhar, RPS and Muniprakash, M and Singh, S (2019) Synthesis and properties of high velocity oxy-fuel sprayed FeCoCrNi2Al high entropy alloy coating. Surface and Coatings Technology, 378. ISSN 02578972
Thanasamy, D and Jesuraj, D and Konda kannan, SK and Avadhanam, V (2019) A novel route to synthesis polythiophene with great yield and high electrical conductivity without post doping process. Polymer, 175. pp. 32-40. ISSN 00323861
Tribhuvanam, S and Nagaraja, HC and Naidu, VPS (2019) Arrhythmia classification with single beat ECG evaluation and support vector machine. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 1-7. ISSN 22783075
Venkataramana, Bonu and Jeevitha, M and Praveen, Kumar and Barshilia, Harish C (2019) Nanolayered multilayer Ti/TiN coatings: Role of bi-layer thickness and annealing on solid particle erosion behavior at elevated temperature. Surface and Coatings Technology, 357. pp. 204-211.
Verma, KK and Padmakara, G and Gaddikeri, KM and Ramesh, Sundaram and Kumar, S and Bose, S (2019) The key role of thread and needle selection towards ‘through-thickness reinforcement’ in tufted carbon fiber-epoxy laminates. Composites Part B: Engineering, 174. ISSN 13598368
Vigneshwaran, S and Sivaprasad, K and Narayanasamy, R and Venkateswarlu, K (2019) Microstructure and mechanical properties of Al – 3Mg – 0.25 Sc alloy sheets produced by cryorolling. Materials Science and Engineering: A, 740-41. pp. 49-62. ISSN 09215093
Vigneshwaran, S and Sivaprasad, K and Narayanasamy, R and Venkateswarlu, K (2019) Superior Strength with Enhanced Fracture Resistance of Al-Mg-Sc Alloy Through Two-Step Cryo Cross Rolling. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (7). pp. 3265-3281. ISSN 10735623
Vijaykumar, MP and Rangaraj, L and Raja, S (2019) Synthesis and characterization of high-performance epoxy/ Ti3AlC2-reinforced conductive polymer composites. Journal of Composite Materials, 53 (26-27). pp. 3861-3874. ISSN 00219983
Viji, M and Vikramaditya, NS (2019) Modes of base pressure fluctuations: Shape, nature, and origin. AIAA Journal, 57 (9). pp. 3933-3942. ISSN 00011452
Vikramaditya, N.S. and Viji, M (2019) Mach Number Effect on Symmetric and Antisymmetric Modes of Base Pressure Fluctuations. Journal of Fluids Engineering, Transactions of the ASME, 141 (2). ISSN 00982202
Winson, D and Choudhury, Balamati and Selvakumar, N and Barshilia, Harish C and Nair, RU (2019) Design and Development of a Hybrid Broadband Radar Absorber Using Metamaterial and Graphene. IEEE Transactions on Antennas and Propagation, 67 (8). pp. 5446-5452. ISSN 0018926X
Bepari Nawazish, A and Ananda, CM and Venkatesh, KS and Gopinath, CY (2019) Development and Integration of Graphical User Interface (GUI) with JUNGO Device Drivers for PCI Express Interface. In: Innovations in Computer Science and Engineering. Lecture Notes in Networks and Systems (74). Springer, Singapore, pp. 589-598. ISBN 978-981-13-7082-3
Nanda, Manju and Rajshekhar Rao, P (2019) Increasing the Verification Analysis Using Tool Assessment as Per DO-254. In: Innovations in Electronics and Communication Engineering. Lecture Notes in Networks and Systems (65). Springer, Singapore, pp. 387-394. ISBN 978-981-13-3765-9
Tabassum, I and Ananda, CM and Byra Reddy, CR (2019) Modelling and Simulation of VOR ILS Receiver Diagnostic Model for Avionics Systems Health Management. In: Innovations in Computer Science and Engineering. Lecture Notes in Networks and Systems (74). Springer, Singapore, pp. 579-588. ISBN 978-981-13-7082-3
Tewari, SK (2019) Wind energy conversion in India. In: Renewable Energy Resources and Rural Applications in the Developing World. Taylor and Francis Ltd., pp. 77-87. ISBN 9781000237757; 9780367285623
Vyas, JJ and Gopalsamy, B and Joshi, H (2019) Electro-Hydraulic Actuation Systems Design, Testing, Identification and Validation. In: Electro-Hydraulic Actuation Systems. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, p. 63. ISBN 978-981-13-2547-2
Vyas, JJ and Gopalsamy, B and Joshi, H (2019) Introduction: Design, Testing, Identification and Validation. In: Electro-Hydraulic Actuation Systems. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 1-17.
Vyas, JJ and Gopalsamy, B and Joshi, H (2019) Mathematical modeling of flapper nozzle valve. In: Electro-Hydraulic Actuation Systems. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 19-37. ISBN 978-981-13-2547-2
Vyas, JJ and Gopalsamy, B and Joshi, H (2019) Results and discussion. In: Electro-Hydraulic Actuation Systems. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 53-61. ISBN 978-981-13-2547-2
Vyas, JJ and Gopalsamy, B and Joshi, H (2019) Servo valve characteristic curves. In: Electro-Hydraulic Actuation Systems. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 39-45. ISBN 978-981-13-2547-2
Vyas, JJ and Gopalsamy, B and Joshi, H (2019) System identification. In: Electro-Hydraulic Actuation Systems. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 47-51. ISBN 978-981-13-2547-2
Abhilash, KJ and Porkodi, P and Shukla, HK (2019) Wet spinning of low cost carbon fiber precursor-lignin incorporated polyacrylonitrile co-polymer fiber. In: AIP Conference Proceedings.
Ailneni, S and Kashyap, SK and Shantha Kumar, N and David Livingstone, D and Aishwarya, N and Varghese, N and Karthik, KV (2019) Characterization of MEMS based Inertial Measurement Unit. In: 2019 International Conference on Range Technology (ICORT), 15-17 Feb, 2019, Balasore, India.
Alvi, AU and Thakur, A and Jangam, S and Pratheesh Kumar, P and Iyengar, VS (2019) Experimental investigation of droplet velocity fields from elliptic injectors in subsonic cross flow. In: ASME 2019 Gas Turbine India Conference, December 5–6, 2019, Chennai, Tamil Nadu, India.
Atchuta, S.R and Barshilia, H.C. and Sakthivel, S (2019) High-temperature stable spinel nanocomposite solar selective absorber coating for concentrated solar thermal application. In: Proceedings of the ISES Solar World Congress 2019 and IEA SHC International Conference on Solar Heating and Cooling for Buildings and Industry.
Babu, MD and Prabhakar, G and Jeevithashree, DV and Saluja, KPS and Pashilkar, AA and Biswas, P (2019) Using Eye gaze tracker to automatically estimate pilots' cognitive load. In: 50th Annual International Symposium of the Society of Flight Test Engineers.
Gouda, DN and Senthilkumar, P and Geetha, RS (2019) Performance Evaluation of Interleaved Concept for Non-Isolated Converter Topology. In: 2019 IEEE International Conference on Electrical, Computer and Communication Technologies (ICECCT), 20-22 Feb. 2019, Coimbatore, India.
Jagannathan, N and Gururaja, S and Manjunatha, CM (2019) Matrix cracking in polymer matrix composites under bi-axial loading. In: 2nd International Conference on Structural Integrity and Exhibition 2018.
Jain, S and Kamali, C and Singh, GK (2019) Inertial Angle of Attack estimation for a small transport aircraft. In: 6th Indian Control Conference, ICC 2019, 18-20 December 2019, Hyderabad, India.
Javagal, S and Raju, J and Venkataramana, K (2019) A comparative study of the behavior of CFRP and GFRP laminates in a plate specimen using modified virtual crack closure technique (MVCCT). In: 2nd International Conference on Structural Integrity and Exhibition 2018.
Jebakumar, SK and Navendu, Kumar and Pashilkar, AA (2019) Flight Envelope Protection for a Fighter Aircraft. In: 2019 6th Indian Control Conference, ICC 2019, 18-20 December 2019, Hyderabad, India.
Jigajinni, VS and Upendranath, V (2019) Health management of a typical small aircraft fuel system using an adaptive technique. In: 2018 IEEE 25th International Conference on High Performance Computing Workshops (HiPCW), 17-20 Dec 2018, Bengaluru, India.
Kaliraj, KR and Yepuri, GB and Sarasamma, JJ and Kumar, K and Jesuraj, F (2019) Parametric studies on gas turbine labyrinth seal for the secondary air flow optimization at static and rotating conditions. In: ASME 2019 Gas Turbine India Conference, GTINDIA 2019, December 5–6, 2019, Chennai, Tamil Nadu, India.
Kumar, Awanish and Padhi, J and Reddy, GS and Narayan, Shiv (2019) Dual band polarization insensitive frequency selective surface absorber. In: MTT-S International Microwave and RF Conference, IMARC 2019, 13-15 December 2019, Mumbai, India.
Kumar, SS and Chotalia, RJ and Jana, S and Ganguli, Ranjan and Kandagal, SB (2019) Single stage axial compressor stability management with self-recirculating casing treatment. In: AIAA Scitech 2019 Forum, 7-11 January 2019, San Diego, California.
Lakshmi, R and Vaitheeswaran, SM and Pargunarajan, K (2019) Cyclostationarity analysis of GPS signals for spoofing detection. In: Proceedings of ICSCSP 2018.
Lathasree, P and Pashilkar, AA and Sundararajan, N (2019) Application of Generic Flight Controller Design Approach for A Delta Canard Fighter AircraftADMIRE. In: 6th Indian Control Conference, ICC 2019, 18-20 December 2019, Hyderabad, India.
Lokesha, H and Veena, S and Safiya, A and Ashwin Kumar, MP and Basavaraju, KS (2019) Evaluation of Delfino (TMS320F28379D) Processor for Helmet ANC Application. In: Global Conference for Advancement in Technology, GCAT 2019, 18-20 October 2019, Bengaluru, India.
Murugan, J N and Chutkey, Kiran and Verma, SB (2019) Influence of base cavity on base pressure at subsonic and supersonic Mach numbers. In: AIP Conference Proceedings.
Myala, J and Patel, Vijay V and Singh, GK (2019) Reliable Fault Identification for Aircraft Control Surface Damage. In: 6th Indian Control Conference, ICC 2019 - Proceedings, 18-20 December 2019, Hyderabad, India.
Naidu, VPS and Setti, Suresh (2019) Vibration Analysis of Heterogeneous Gearbox Faults using EMD Features and SVM Classifier. In: ICMPT 2019, 11-13, July, 2019, IIT, Chennai.
Nandana, MS and Udaya Bhat, K and Manjunatha, CM (2019) Influence of retrogression and re-ageing heat treatment on the fatigue crack growth behavior of 7010 aluminum alloy. In: 2nd International Conference on Structural Integrity and Exhibition 2018.
Niranjanaa, K and Jerald Maria Antony, G and Raja, S (2019) A study on adsorption of gases in the thin film nanocomposites. In: International Conference on Materials for Energy and Environment (ICMEE 2018), Chennai, Tamil Nadu, India.
Noolvi, B and Raja, S and Nagaraj, S (2019) Constitutive modeling of smart adaptive composite with inactive SMP. In: International Conference on Advances in Materials, Manufacturing and Applied Sciences.
Sajjan, Sangeetha S and Bhumika, CS and Choudhury, Balamati and Nair, RU (2019) Machine-learning for classification of naval targets. In: 2019 IEEE MTT-S International Microwave and RF Conference (IMARC), 13-15 December 2019, Mumbai, India.
Satish Kumar, S and Kumar, L and Senthil Kumaran, R and Kumar, VS and Shobhavathy, MT (2019) Design of high transonic axial compressor stage for small gas turbine applications. In: ASME 2019 Gas Turbine India Conference, GTINDIA 2019, December 5–6, 2019, Chennai, Tamil Nadu, India.
Sendil, Murugan M and Pradeep Kumar, B and Ananda, CM and Lakshminarayanan, G (2019) Design Approach for FPGA based High Bandwidth Fibre Channel Analyser for Aerospace Application. In: 4th International Conference on Electrical, Electronics, Communication, Computer Technologies and Optimization Techniques, ICEECCOT 2019, 13-14 December 2019, Mysuru, India.
Shabaze, M and Sahoo, PK and Jagannatha Guptha, VL (2019) Multiscale material modelling and analysis of carbon fiber/MWCNT/ epoxy composites to predict effective elastic constants. In: Part of special issue: 1st International Conference on Manufacturing, Material Science and Engineering.
Shakti, D and Saha, S and Sardana, V and Akula, P and Ananda, CM and Tewary, S (2019) EEG as a tool to measure cognitive load while playing Sudoku: A preliminary study. In: 3rd International Conference on Electronics, Materials Engineering and Nano- Technology, IEMENTech 2019, 29-31 August 2019, Kolkata, India.
Shetty, K and Srihari, Shylaja and Manjunatha, CM (2019) Effect of hygrothermal aging on the interlaminar shear strength of a carbon fibre composite. In: 2nd International Conference on Structural Integrity and Exhibition 2018.
Shridhar, K and Suresha, BS and Mohan Kumar, M (2019) Fatigue Analysis of Wing-Fuselage Lug section of a Transport Aircraft. In: 2nd International Conference on Structural Integrity and Exhibition 2018.
Sindhu, BR and Raju, J and Kamath, K (2019) A comparative numerical study of standard 3D composite plate using virtual crack closure technique and cohesive zone modelling method. In: IOP Conference Series: Materials Science and Engineering, 12-13 April 2019, Coimbatore, Tamil Nadu, India.
Singh, A and Singh, Hema and Sasidharan, DK (2019) Analytical method of radiation mode radar cross section (RCS) of low profile phased arrays. In: 2019 URSI Asia-Pacific Radio Science Conference, 9-15 March 2019, New Delhi, India.
Sravya, RV and Kumari, R and Choudhury, Balamati (2019) Gain Enhancement of Annular Ring Patch Using Cascaded EBG. In: 2019 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications, 16-18 August 2019, Bochum, Germany.
Sudhakar, S and Karthikeyan, N and Suriyanarayanan, P (2019) Experimental studies on the effect of leading-edge tubercles on laminar separation bubble. In: 52nd Aerospace Sciences Meeting, 13–17 January 2014, National Harbor, MD.
Sunil, S and Abhilash, JK and Kumar, A and Shukla, HK (2019) Oxidative stabilization studies on pretreated polyacrylonitrile precursor fiber suitable for carbon fiber production. In: AIP Conference Proceedings 2166.
Suresh, S and Naidu, VPS (2019) Vibration Analysis of Heterogeneous Gearbox Faults using EMD Features and SVM Classifier. In: IOP Conference Series: Materials Science and Engineering.
Tiwari, S and Kumar, R and Menon, P K and Antony Jeyaseelan, A and Dutta, Soma and Pratap, R (2019) On the realization of self-sensing piezoelectric MEMS actuators. In: Proceedings of MARSS 2019: 4th International Conference on Manipulation, Automation, and Robotics at Small Scales, 1-5 July 2019, Helsinki, Finland.
Vasanth, P and Kamalakannan, GM and Shivaraj, CS (2019) Study of Different Modelling Techniques of SMA Actuator and Their Validation Through Simulation. In: Emerging Research in Electronics, Computer Science and Technology.
Yathirajam, B and Vaitheeswaran, SM and Ananda, CM (2019) Scale estimation of monocular SLAM using direct acceleration pair measurements. In: ACM International Conference Proceeding Series.
