Items where Year is 2018

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | F | G | H | J | K | M | N | P | R | S | V
Number of items: 58.

A

Amulya, TM and Naidu, VPS (2018) A Brief Exposition on Brain-Computer Interface. Control and Data Fusion e-Journal, 2 (4). pp. 30-43. ISSN 2581-5490

B

Barshilia, Harish C (2018) Effect of inhomogeneous mesoporosity and defects on the luminescent properties of slanted silicon nanowires prepared by facile metal-assisted chemical etching. Journal of Applied Physics, 124. p. 104303.

Biswas, K. (2018) Military airworthiness and certification procedures: Global scenario. Lecture Notes in Mechanical Engineering. pp. 315-331. ISSN 21954356

C

Chakradhar, R.P.S. and Prasad, G and Venkateswarlu, K and Srivastava, Meenu (2018) An Investigation on the Wear and Corrosion Behavior of HVOF-Sprayed WC-12Co-Al2O3 Cermet Coating. Journal of Materials Engineering and Performance, 27 (3). pp. 1241-1248. ISSN 10599495

Chembath, M and Balaraju,, J.N and Sujata, M, M (2018) Characterization of Surface-Treated NiTi Alloy by Various Electrochemical Techniques in Phosphate-Buffered Saline. Journal of Bio- and Tribo-Corrosion, 4 (2). pp. 1-19. ISSN 21984220

D

Dangi, A and Biswas, A and Sarkar, A and Kashyap, S and Chattopadhyay, K and Barshilia, Harish C and Basu, B (2018) Enhancing spectrally selective response of W/WAlN/WAlON/Al2O3 – Based nanostructured multilayer absorber coating through graded optical constants. Solar Energy Materials and Solar Cells, 176. pp. 157-166. ISSN 09270248

Davis, D. and Srivastava, M. and Malathi, M and Panigrahi, B.B. and Singh, S. (2018) Effect of Cr2AlC MAX phase addition on strengthening of Ni-Mo-Al alloy coating on piston ring: Tribological and twist-fatigue life assessment. Effect of Cr2AlC MAX phase addition on strengthening of Ni-Mo-Al alloy coating on piston ring: Tribological and twist-fatigue life assessment. ISSN 01694332

Dhanush, S and Sreejesh, M and Bindu, K and Chowdhury, P and Nagaraja, HS (2018) Synthesis and electrochemical properties of silver dendrites and silver dendrites/rGO composite for applications in paracetamol sensing. Materials Research Bulletin, 100. pp. 295-301. ISSN 00255408

Dominic, J. and David, T. and Vanaja, A. and Muralidharan, G. and Maheswari, N. and Kumar, K.K.S. (2018) Supercapacitor performance study of lithium chloride doped polyaniline. Applied Surface Science, 460. pp. 40-47. ISSN 01694332

F

Fletcher, J.K. and Parker, D.J. and Hunt, K.M.R. and Vishwanathan, G. and Mrudula, G (2018) The interaction of Indian monsoon depressions with northwesterly midlevel dry intrusions. Monthly Weather Review, 146 (3). pp. 679-693. ISSN 00270644

G

Gnanavel, S and Ponnusamy, S and Mohan, L and Muthamizhchelvan, C (2018) In Vitro Corrosion Behaviour of Ti–6Al–4V and 316L Stainless Steel Alloys for Biomedical Implant Applications. Journal of Bio- and Tribo-Corrosion, 4 (1). ISSN 21984220

Gnanavel, S and Ponnusamy, S and Mohan, L and Radhika, R and Muthamizhchelvan, C and Ramasubramanian, K (2018) Electrochemical Behavior of Biomedical Titanium Alloys Coated with Diamond Carbon in Hanks’ Solution. Journal of Materials Engineering and Performance, 27 (4). pp. 1635-1641. ISSN 10599495

H

Hiremath, C.P. and Senthilnathan, K. and Naik, N.K. and Guha, A. and Tewari, A. (2018) Microstructural damage based micromechanics model to predict stiffness reduction in damaged unidirectional composites. Journal of Reinforced Plastics and Composites. ISSN 07316844

Hiremath, C.P. and Senthilnathan, K. and Naik, N.K. and Guha, A. and Tewari, A. (2018) Microstructural damage based modeling of thermal conductivity of cyclically loaded CFRP. Composites Science and Technology, 154. pp. 37-44. ISSN 02663538

Hiremath, CP and Senthilnathan, K and Naik, KK and Guha, A and Tewari, A (2018) Numerical Study and Experimental Validation of Effect of Varying Fiber Crack Density on Stiffness Reduction in CFRP Composites. Journal of Materials Engineering and Performance, 27 (4). pp. 1685-1693. ISSN 10599495

J

Jangam, S. and Hema Devi, A. and Raja, S. and Hemachandra Reddy, K. and Vijay Kumar, G. (2018) The tensile fatigue behaviour of aligned MWNT/epoxy nanocomposites. Lecture Notes in Mechanical Engineering. pp. 351-359. ISSN 21954356

Jangam, S. and Reddy, K.H. and Raja, S. (2018) Fabrication & Characterization of Hybrid fibers and Hybrid Fiber reinforced composites - A Novel Approach}. In: Materials Today: Proceedings.

Jaya Christiyan, KG and Chandrasekhar, U and Rajesh Mathivanan, N and Venkateswarlu, K (2018) Influence of manufacturing parameters on the strength of PLA parts using Layered Manufacturing technique: A statistical approach. In: International Conference on Advances in Materials and Manufacturing Applications (IConAMMA-2017) , Bengaluru, India, 17–19 August 2017, Bengaluru.

K

Kadam, M and Gopalsamy, B and Bujurke, AA and Joshi, KM (2018) Estimation of static burst pressure in unflawed high pressure cylinders using nonlinear FEA. Thin-Walled Structures, 126. pp. 79-84. ISSN 02638231

Karadan, P. and Aggarwal, S. and Anappara, A.A. and Narayana, C. and Barshilia, H.C. (2018) Tailored periodic Si nanopillar based architectures as highly sensitive universal SERS biosensing platform. Sensors and Actuators, B: Chemical, 254. pp. 264-271. ISSN 09254005

Kidambi, R. and Srinivasan, U. (2018) Is the subharmonic threshold always lower than the fundamental one in plane Poiseuille flow. Physics of Fluids, 30 (1). ISSN 10706631

Kumar, A and Karadan, P and Barshilia, Harish C (2018) Synthesis of silver nanowires towards the development the ultrasensitive AgNWs/SiNPLs hybrid photodetector and flexible transparent conductor. Materials Science in Semiconductor Processing, 75. pp. 239-246. ISSN 13698001

M

Mahesha, B.K. and Thulasi Durai, D. and Karuppannan, D. and Dilip Kumar, K. (2018) Linear elastic fracture mechanics (LEFM)-based single lap joint (SLJ) mixed-mode analysis for aerospace structures}. Dilip Kumar, K.. pp. 53-66. ISSN 21954356

Mahima, P. and Suprava, M. and Vandana, S. and Yazeen, M.P.S. and Nair, R.U. (2018) EM characteristics of planar slab model of graded dielectric inhomogeneous planar structure. SpringerBriefs in Applied Sciences and Technology. pp. 7-13. ISSN 2191530X

Mahima, P. and Suprava, M. and Vandana, S. and Yazeen, M.P.S. and Nair, R.U. (2018) EM design aspects of graded IPL. SpringerBriefs in Applied Sciences and Technology. pp. 15-17. ISSN 2191530X

Mahima, P. and Suprava, M. and Vandana, S. and Yazeen, M.P.S. and Nair, R.U. (2018) EM performance analysis of radomes. SpringerBriefs in Applied Sciences and Technology. pp. 19-41. ISSN 2191530X

Masood, SN and Viswamurthy, SR and Singh, AK and Muthukumar, M and Gaddikeri, KM (2018) Simulation and validation of disbond growth in co-cured composite skin–stringer specimens using cohesive elements. Journal of Composite Materials, 52 (6). pp. 807-822. ISSN 00219983

Mukherjee, D and Dey, A and Esther, A.C.M and Palai, D, D and Sridhara, N and Bera, P and Bhattacharya, M and Rajendra, A and Sharma, A.K and Mukhopadhyay, A.K (2018) Reversible, repeatable and low phase transition behaviour of spin coated nanostructured vanadium oxide thin films with superior mechanical properties. Ceramics International, 44 (8). pp. 1-9. ISSN 02728842

N

Nagarajan, K.K. and Singha, S. and Cordier, L. and Airiau, C. (2018) Open-loop control of cavity noise using Proper Orthogonal Decomposition reduced-order model. Computers and Fluids, 160. pp. 1-13. ISSN 00457930

Naidu, VPS (2018) Bearing Fault Diagnosis using DWT& SVM. International Journal of Engineering Research & Technology (IJERT), 6 (13). pp. 1-6. ISSN 2278-0181

Nandana, MS and Udaya Bhat, K and Manjunatha, CM (2018) Effect of Retrogression Heat Treatment Time on Microstructure and Mechanical Properties of AA7010. Journal of Materials Engineering and Performance, 27 (4). pp. 1628-1634. ISSN 10599495

P

Patra, N and Prajapat, C.L. and De, R and Rao, KD and Barshilia, Harish C (2018) Correlation of structural ordering with magnetic properties of pulsed laser deposited Co2FeGa Heusler alloy thin films. Journal of Alloys and Compounds, 748. pp. 653-670. ISSN 09258388 (In Press)

Politova, E.D. and Golubko, N.V. and Kaleva, G.M. and Mosunov, A.V. and Sadovskaya, N.V. and Stefanovich, S.Y. and Kiselev, D.A. and Kislyuk, A.M. and Panda, P.K. (2018) Processing and characterization of lead-free ceramics on the base of sodium-potassium niobat. Journal of Advanced Dielectrics, 8 (1). ISSN 2010135X

Prakash, B and Pavitra, R and Senthil Kumar, S and Aruna, S.T (2018) Electrolyte bi-layering strategy to improve the performance of an intermediate temperature solid oxide fuel cell: A review. Journal of Power Sources, 381. pp. 136-155. ISSN 03787753

Prakashaiah, BG and Vinaya Kumara, D and Anup Pandith, A and Nityananda Shetty, A and Amitha Rani, BE (2018) Corrosion inhibition of 2024-T3 aluminum alloy in 3.5% NaCl by thiosemicarbazone derivatives. Corrosion Science, 136. pp. 326-338. ISSN 0010938X

R

Raju, SV and Godwal, BK and Singh, AK and Jeanloz, R and Saxena, SK (2018) High-pressure strengths of Ni3Al and Ni-Al-Cr. Journal of Alloys and Compounds, 741. pp. 642-647. ISSN 09258388

Rao, K.V. and Rao, S. and Revathi, A. and Dayananda, G.N. (2018) Influence of soft segments on thermo-mechanical behaviour of novel epoxy based shape memory polymers. Indian Journal of Chemical Technology, 25 (1). pp. 68-73. ISSN 0971457X

Roopa, S and Narasimhan, SV (2018) Magnitude Square Coherence (MSC) Estimation via an ARMA Model Based on Analytic DCT and Group Delay. Circuits, Systems, and Signal Processing, 37 (3). pp. 1203-1222. ISSN 0278081X

S

Sane, AU and Padole, PM and Manjunatha, CM and Uddanwadiker, RV and Jhunjhunwala, P (2018) Mixed mode cohesive zone modelling and analysis of adhesively bonded composite T-joint under pull-out load. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40 (3). ISSN 16785878

Santhana Krishnan, G and Thomas, P and Naveen, S and Murali, N (2018) Molecular and thermal studies of carbon fiber precursor polymers with low thermal-oxidative stabilization characteristics. Journal of Applied Polymer Science, 135 (25). pp. 1-15. ISSN 00218995

Sellarajan, B and Saravanan, P and Ghosh, SK and Nagaraja, HS and Barshilia, Harish C and Chowdhury, P (2018) Shape induced magnetic vortex state in hexagonal ordered cofe nanodot arrays using ultrathin alumina shadow mask. Journal of Magnetism and Magnetic Materials, 451. pp. 51-56. ISSN 03048853

Sendil, Murugan M and Srikanth, L and Naidu, VPS (2018) Design and Development of Labview based Environmental Test Chamber Controller. In: 2017 International Conference on Electrical, Electronics, Communication, Computer, and Optimization Techniques (ICEECCOT), 15-16 December 2017, Mysuru, Indian.

Sengupta, A and Sengupta, T.K. and Sengupta, S. and Mudkavi, V. (2018) Effects of error on the onset and evolution of Rayleigh–Taylor instability. Notes on Numerical Fluid Mechanics and Multidisciplinary Design, 135. pp. 233-239. ISSN 16122909

Setti, S and Naidu, VPS (2018) Gearbox Health Condition Monitoring: A brief exposition. Control and Data Fusion e-Journal, 2 (4). pp. 13-23. ISSN 2581-5490

Sibin, K P and Srinivas, G and Shashikala, HD and Arjun, Dey and Sridhara, N and Sharma, AK and Barshilia, Harish C (2018) Optical and electrical studies of sputter-deposited transparent and conducting ITO/Ag/ITO multilayer on Kapton® substrate for transparent flexible electronic applications. In: Second International Conference on Large Area Flexible Microelectronics (ILAFM 2016), December 20th-22nd, 2016.

Sibin, K.P. and Mary Esther, A.C. and Shashikala, H.D. and Dey, A. and Sridhara, N. and Sharma, A.K. and Barshilia, H.C. (2018) Environmental stability of transparent and conducting ITO thin films coated on flexible FEP and Kapton® substrates for spacecraft applications. Solar Energy Materials and Solar Cells, 176. pp. 134-141. ISSN 09270248

Siju, John and Barshilia, Harish C (2018) Synthesis of high yield silver nanowires for transparent flexible conductor applications. In: Second International Conference on Large Area Flexible Microelectronics (ILAFM 2016): Wearable Electronics, December 20th-22nd, 2016.

Sivaranjani, T. and Abhirama, K. and Manjuprasad, M. (2018) Probabilistic fatigue life estimation of plate with multiple stress concentration zones}. Lecture Notes in Mechanical Engineering. pp. 307-322. ISSN 21954356

Sreedhar, M. and Brijitta, J. and Reddy, I.N. and Cho, M. and Shim, J. and Bera, P. and Joshi, B.N. and Yoon, S.S. (2018) Dye degradation studies of Mo-doped TiO2 thin films developed by reactive sputtering. Surface and Interface Analysis, 50 (2). pp. 171-179. ISSN 01422421

Sreevidya, PV and Khan, Jakeer and Barshilia, Harish C and Ananda, CM and Chowdhury, P (2018) Development of two axes magnetometer for navigation applications. Journal of Magnetism and Magnetic Materials, 448. pp. 298-302. ISSN 03048853

Sudheera, - and Rammohan, Y.S. and Pradeep, M.S. (2018) Split Hopkinson Pressure Bar Apparatus for Compression Testing: A Review. In: Materials Today: Proceedings.

Sugun, BS and Sandeep, DN (2018) Integral weaving of orthogonal 3D ‘T’ stiffeners based on pleat weaving concept. Journal of Industrial Textiles, 47 (7). pp. 1626-1644. ISSN 15280837

V

Verma, S.B. and Manisankar, C. (2018) Control of incident shock-induced separation using vane-type vortex-generating devices. AIAA Journal, 56 (4). pp. 1600-1615. ISSN 00011452

Verma, SB and Chidambaranathan, M and Hadjadj, A (2018) Analysis of shock unsteadiness in a supersonic over-expanded planar nozzle. European Journal of Mechanics, B/Fluids, 68. pp. 55-65. ISSN 09977546

Vigneshwaran, S and Sivaprasad, K and Narayanasamy, R and Venkateswarlu, K (2018) Formability and fracture behaviour of cryorolled Al-3 Mg-0.25 Sc alloy. Materials Science and Engineering A, 721. pp. 14-21. ISSN 09215093

Vikramaditya, N.S. and Viji, M. and Verma, S.B. and Ali, N. and Thakur, D.N. (2018) Base pressure fluctuations on typical missile configuration in presence of base cavity. Base pressure fluctuations on typical missile configuration in presence of base cavity, 55 (2). pp. 335-345. ISSN 00224650

Viswanathan, S and Mohan, L and Bera, Parthasarathi and Shanthiswaroo, P and Muniprakash, M and Barshilia, Harish C and Anandan, C (2018) Corrosion and wear resistance properties of multilayered diamond-like carbon nanocomposite coating. Surface and Interface Analysis, 50 (3). pp. 265-276. ISSN 01422421

Viswanathan, S. and Mohan, L and Bera, Parthasarathi and Swaroop, S. Shanthi and Muniprakash, M and Barshilia, Harish C and Anandan, C (2018) Corrosion and wear resistance properties of multilayered diamond‐like carbon nanocomposite coating. Surface and Interface Analysis, 50. pp. 265-276.

This list was generated on Mon Jul 4 02:35:59 2022 IST.