 | Up a level |
Aadhavan, R. and Bera, P. and Anandan, C. and Kannan, S. and Suresh Babu, K. (2017) Phase evolution of EBPVD coated ceria-zirconia nanostructure and its impact on high temperature oxidation of AISI 304. Corrosion Science, 129. pp. 115-125. ISSN 0010938X
Alex, EC and Rames, KV and Sridevi, H (2017) Quantification and understanding the observed changes in land cover patterns in Bangalore. International Journal of Civil Engineering and Technology, 8 (4). pp. 597-603. ISSN 09766308
Alone, DB and Kumar, SS and Shobhavathy, MT and Mudipalli, JRR and Pradeep, AM and Ramamurthy, S and Iyengar, VS (2017) Experimental assessment on effect of lower porosities of bend skewed casing treatment on the performance of high speed compressor stage with tip critical rotor characteristics. Aerospace Science and Technology, 60. pp. 193-202. ISSN 12709638
Antony, G Jerald Maria and Jarali, Chetan S and Aruna, ST and Raja, S (2017) Tailored poly(ethylene) glycol dimethacrylate based shape memory polymer for orthopedic applications. Journal of the Mechanical Behavior of Biomedical Materials, 65. pp. 857-865. ISSN 17516161
Antony Jeyaseelan, A. and Rangappa, D. and Dutta, S. (2017) Effect of Eu3 + doping on curie temperature and fatigue properties of Pb,La(ZrTi)O3 films. Thin Solid Films, 642. pp. 136-141. ISSN 00406090
Anusha, B.K. and Manju, N. and Jayanthi, J. (2017) Design and development of certification compliance tool for airborne systems. In: 2017 International Conference on Advances in Computing, Communications and Informatics, ICACCI 2017.
Aravind, S and Ramesh, KV and Shambavi Kamath, M (2017) Modelling the impact of socio-economic dynamics on urbanization over hyderabad. International Journal of Civil Engineering and Technology, 8 (4). pp. 368-375. ISSN 09766308
Arivoli, D and Singh, Ishan and Suriyanarayanan, P (2017) PIV investigation of self-adaptive flap on low aspect ratio wings. In: AIAA SciTech Forum - 55th AIAA Aerospace Sciences Meeting, 9 - 13 January 2017, Grapevine, Texas.
Aruna, ST and Balaji, LS and Senthil Kumar, S and Shri Prakash , B (2017) Electrospinning in solid oxide fuel cells – A review. Renewable and Sustainable Energy Reviews, 67. pp. 673-682. ISSN 1364-0321
Aruna, ST and Kulkarni, Saraswathi and Chakravarthy, M and Senthil Kumar, S and Balaji, N and Mandal, Chitra (2017) Comparative study on the synthesis and properties of suspension precursor plasma sprayed hydroxyapatite coatings. Ceramics International. ISSN 0272-8842
Aruna, ST and Balaji, LS and Kumar, SS and Prakash, BS (2017) Electrospinning in solid oxide fuel cells – A review. Renewable and Sustainable Energy Reviews, 67. pp. 673-682. ISSN 13640321
Aruna, ST and Kulkarni, Saraswathi and Chakraborty, M and Kumar, SS and Balaji, N and Mandal, C (2017) A comparative study on the synthesis and properties of suspension and solution precursor plasma sprayed hydroxyapatite coatings. Ceramics International, 43 (13). pp. 9715-9722. ISSN 02728842
Augustin, MJ and Amitabha, D and Sakthi Sathya, P S and Nitesh, Gupta and Viswamurthy, SR and Kotresh, Gaddikeri M and Sundaram, R (2017) Development of strain measurement based on-line impact monitoring system for composite structures. In: {Structural Health Monitoring 2017: Real-Time Material State Awareness and Data-Driven Safety Assurance - Proceedings of the 11th International Workshop on Structural Health Monitoring, IWSHM 2017.
Augustin, MJ and Amitabha, D and Sakthi Sathya, P S and Nitesh, Gupta and Viswamurthy, SR and Kotresh, Gaddikeri M and Sundaram, Ramesh (2017) Development of Strain Measurement Based On-line Impact Monitoring System for Composite Structures. In: Proceedings of the 11th International Workshop on Structural Health Monitoring, IWSHM 2017, 12 -14 September 2017, USA.
Banerjee, K and Thiagarajan, N and Thiagarajan, P (2017) A flaxseed oil emulgel formulation for prospective food applications synthesis and characterization. Research Journal of Pharmacy and Technology, 10 (6). pp. 1802-1808. ISSN 09743618
US (2017) An improved solar selective coating having high thermal stability and a process for the preparation thereof. US9803891B2.
Australian Patent (2017) An improved solar selective coating having high thermal stability and a process for the preparation thereof,. AU2012354063.
European (2017) A hybrid multilayer solar selective coating for high temperature solar thermal applications and a process for the preparation thereof. EP 2 954 265 B1.
Bhole, K and Balaraju, JN and Anil Kumar, A and Kempaiah, UN (2017) Evaluation of Electroless Nickel Poly alloys for Drilling of CFRP. In: Materials Today: Proceedings.
Bose, R.S.C. and Nag, A. (2017) Defect-Associated Thermoelectric Transport Properties of Dual-Substituted CaMn1−xNbx/2Mx/2O3 (M = Mo, W; 0.02 ≤ x ≤ 0.06). Journal of Electronic Materials, 46 (11). pp. 6653-6661. ISSN 03615235
Chotalia, RJ and Alone, DB (2017) Numerical investigations on influence of uniform blade surface roughness on the performance characteristics of a transonic axial flow compressor stage. In: ASME 2017 Gas Turbine India Conference, GTINDIA 2017, 7 - 8 December 2017, Bangalore, India.
Dan, A and Barshilia, Harish C and Chattopadhyay, K and Basu, B (2017) Solar energy absorption mediated by surface plasma polaritons in spectrally selective dielectric-metal-dielectric coatings: A critical review. Renewable and Sustainable Energy Reviews, 79. pp. 1050-1077. ISSN 13640321
Darji, AP and Alone, DB and Mistry, CS (2017) Flow studies on a single stage transonic axial flow compressor retrofitted with circumferential grooves and varied rotor-stator axial gap. In: ASME 2017 Gas Turbine India Conference, GTINDIA 2017, 7 - 8 December 2017, Bangalore, India.
Das, S. and Halder, S. and Wang, J. and Goyat, M.S. and Anil Kumar, A. and Fang, Y (2017) Amending the thermo-mechanical response and mechanical properties of epoxy composites with silanized chopped carbon fibers. Composites Part A: Applied Science and Manufacturing, 102. pp. 347-356. ISSN 1359835X
Dr Ramachandran, Guruprasad (2017) Impact of Demographic Variables on the Use Patterns of Electronic Information Resources Among Aerospace Scientists and Engineers of Bangalore. International Journal on Environmental Sciences , 8 (1). pp. 90-104. ISSN 0976-4534
Durai Arun, P and Sathyanarayana, CN and Raja, S and Naidu, VPS (2017) Sensor network performance and reliability evaluation algorithms. In: Proceedings of SPIE - The International Society for Optical Engineering, Portland, Oregon, United States.
Ganguli, Ranjan and Thakkar, D and Viswamurthy, SR (2017) Active rotating beams. Advances in Industrial Control. pp. 165-176. ISSN 14309491
Ganguli, Ranjan and Thakkar, D and Viswamurthy, SR (2017) Box-beam active rotor blades. Advances in Industrial Control. pp. 177-187. ISSN 14309491
Gireesh, Yanamashetti and Suryanarayana, GK and Mukherjee, Rinku (2017) Development of Flow over Blunt-Nosed Slender Bodies at Transonic Mach Numbers. Journal of Physics: Conference Series, 822 (1). 012071. ISSN 1742-6596
Goyal, P and Nanda, Manju and Jayanthi, J (2017) Mutation analysis of stateflow to improve the modelling analysis. Communications in Computer and Information Science, 721. pp. 173-182. ISSN 18650929
Guruprasad, R (2017) Impact and Significance of Electronic Information Resources among Aerospace Scientists, Engineers and Technologists of Bangalore: A Research Survey. International Journal of Innovative Research in Science, Engineering and Technology, 6 (1). pp. 246-262. ISSN 2319-8753
Hela Saraswathi, B and Naidu, VPS (2017) Implementation and Validation of Visual and Infrared Image Fusion Techniques in C# .NET Environment. Control and Data Fusion-CADF e-JournaL, Vol. 1 (No. 2). pp. 27-39.
Jagannathan, N. and Gururaja, S. and Manjunatha, CM (2017) Matrix crack evolution in multi-directional composite laminates considering thickness effects. Advanced Composite Materials. pp. 1-19. ISSN 09243046
Jain, S and Kamali, C and Yarlagadda, Y and Saraf, Amitabh and Goyal, Anup (2017) Calibration and accuracy determination of airdata system for a modern fighter. In: AIAA Atmospheric Flight Mechanics Conference, 2017.
Jaiswal, S and Mathur, JS (2017) Implementation of matrix dissipation scheme for numerical simulations of two dimensional Navier-Stokes equations. Lecture Notes in Mechanical Engineering, PartF8. pp. 343-352. ISSN 21954356
Jalaja, MA and Predeep, P and Dutta, Soma (2017) Ferroelectric, ferromagnetic and optical properties of KBiFe2O5 thin film: A structure property relationship. Materials Research Express, 4 (1). ISSN 20531591
James, P and Suresh, S and Banker, Manisha M and Varughese, Byji and Sundaram, Ramesh (2017) SAGAR PLot: Imitating River Meandering to Identify the Stringer Cutout Shape for Reduced Peel Load in Composite Co-cured Joint. In: Materials Today: Proceedings.
Jarali, Chetan S and Madhusudan, M and Vidyashankar, S and Charles, Lu Y (2017) Modelling of the interfacial damping due to nanotube agglomerations in nanocomposites. Smart Structures and Systems, 19 (1). pp. 57-66. ISSN 17381584
Jigajinni, VS and Upendranath, V (2017) ANFIS-based fault diagnosis tool for a typical small aircraft fuel system. Advances in Intelligent Systems and Computing, 479. pp. 391-405. ISSN 21945357
Joshi, P. and Rajaei, H. and Kunnen, R.P. and Clercx, H.J.H. (2017) Heat transfer in rotating Rayleigh-Bénard convection with rough plates. Journal of Fluid Mechanics, 830. ISSN 00221120
Jyothi, G and Pradeep Kumar, B and Ananda, CM and Nisha, KCP (2017) Design and implementation of Livetap for deterministic Ethernet bus using FPGA. In: 2016 IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Proceedings, 20 - 21 May 2016, Bangalore, India.
Jyothi, J and Nagaraja, HS and Barshilia, Harish C (2017) Effect of Composition on Designed Tandem Absorber to Achieve Selective Properties for High Temperature Solar Thermal Applications. In: Materials Today: Proceedings.
Jyothi, J. and Soum-Glaude, A and Nagaraja, H.S. and Barshilia, H.C. (2017) Measurement of high temperature emissivity and photothermal conversion efficiency of TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO spectrally selective coating. Solar Energy Materials and Solar Cells, 171. pp. 123-130. ISSN 09270248
Kadam, M and Murugan, GB and Bujurke, AA and Joshi, KM (2017) Finite Element Prediction of Static Burst Pressure in Closed Thick- walled Unflawed Cylinders of Different Diameter Ratios. In: Procedia Engineering.
Karadan, P. and Parida, S. and Kumar, A. and Anappara, A.A. and Dhara, S. and Barshilia, H.C. (2017) Charge transport studies on Si nanopillars for photodetectors fabricated using vapor phase metal-assisted chemical etching. Applied Physics A: Materials Science and Processing, 123 (11). ISSN 09478396
Karthikeyan, N and Venkatakrishnan, L (2017) Acoustic characterization of jet interaction with launch structures during lift-off. Journal of Spacecraft and Rockets, 54 (2). pp. 356-367. ISSN 00224650
Kavathia, M and Settipalli, M and Raja, S (2017) Active-passive damping characteristics of extension and shear mode piezoelectric fiber nano reinforced composite (PFNRC). In: ASME 2017 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2017, 18 - 20 December 2017, Snowbird, Utah, USA.
Khadeeja Nusrath, TK and Basappa, Shri and Singh, Jatinder and Babu, GK (2017) In-Flight Center-of-Gravity Estimation Using Extended Kalman Filter. In: 2016 IEEE Annual India Conference, INDICON 2016, 16 - 18 December 2016, Bangalore, India.
Kulkarni, V and Nanda, Manju (2017) Data driven prognosis approach for safety critical systems. In: 2016 IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Proceedings, 20 - 21 May 2016, Bangalore, India.
Kumar, A and Samanta, S and Latha, S and Debnath, AK and Singh, A and Muthe, KP and Barshilia, Harish C (2017) Enhanced Cl2 sensitivity of cobalt-phthalocyanine film by utilizing a porous nanostructured surface fabricated on glass. RSC Advances, 7 (7). pp. 4135-4143. ISSN 20462069
Kumar, R. and Kumar, R.M. and Bera, P. and Ariharan, S. and Lahiri, D. and Lahiri, I. (2017) Temperature-time dependent transmittance, sheet resistance and bonding energy of reduced graphene oxide on soda lime glass. Applied Surface Science, 425. pp. 558-563. ISSN 01694332
Kumar, SS and Kandagal, SB and Ganguli, Ranjan and Jana, S (2017) Structural dynamic behavior of axial compressor rotor. In: ASME 2017 Gas Turbine India Conference, GTINDIA 2017, 7 - 8 December 2017, Bangalore, India.
Kumaran, RS and Kumar, K and Poornima, N (2017) Experimental study of unsteady pressure fluctuations due to tip leakage flows in an axial flow turbine. In: ASME 2017 Gas Turbine India Conference, GTINDIA 2017, 7 - 8 December 2017, Bangalore, India.
Kushal, K.S. and Nanda, M. and Jayanthi, J. and Dhage, S. (2017) Using System Analysis Modeling Language (SAML) for validating the critical aerospace model. In: 2017 International Conference on Advances in Computing, Communications and Informatics, ICACCI 2017.
Kushal, KS and Nanda, Manju and Jayanthi, J (2017) Architecture Level Safety Analyses for Safety-Critical Systems. International Journal of Aerospace Engineering, 2017. pp. 1-10. ISSN 16875966
Lakshmi, RV and Aruna, ST and Anandan, C and Bera, Parthasarathi and Sampath, S (2017) EIS and XPS studies on the self-healing properties of Ce-modified silica-alumina hybrid coatings: Evidence for Ce(III) migration. Surface and Coatings Technology, 309. pp. 363-370. ISSN 02578972
Lashmi, PG and Ananthapadmanabhan, PV and Chakravarthy, Y and Unnikrishnan, G and Balaji, N and Aruna, ST (2017) Hot corrosion studies on plasma sprayed bi-layered YSZ/La2Ce2O7 thermal barrier coating fabricated from synthesized powders. Journal of Alloys and Compounds, 711. pp. 355-364. ISSN 0925-8388
Laxman Mani Kanta, P. and Srivastava, V.C. and Venkateswarlu, K. and Paswan, S. and Mahato, B. and Das, G. and Sivaprasad, K and Krishna, K.G. (2017) Corrosion behavior of ultrafine-grained AA2024 aluminum alloy produced by cryorolling. International Journal of Minerals, Metallurgy and Materials, 24 (11). pp. 1293-1305. ISSN 16744799
Machavaram, VD and Ananda, CM and Pradeep Kumar, B and Kumar, KJ (2017) Design and implementation of fiber channel based high speed receiver protocol for avionics on FPGA. In: 2016 IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Proceedings, 20 - 21 May 2016, Bangalore, India.
Mahima, P and Sangeetha, B and Narayan, S and Nair, RU (2017) EM design of hybrid-element FSS structure for radome application. In: 2016 IEEE Annual India Conference, INDICON 2016, 16 - 18 December 2016, Bangalore, India.
Manohar, R and Dutta, M and Singh, Hema (2017) Low sidelobe level microstrip patch array: Em design and performance analysis. In: 2016 IEEE Annual India Conference, INDICON 2016, 16 - 18 December 2016, Bangalore, India.
Mohamed, Majeed (2017) System identification of flexible aircraft in frequency domain. Aircraft Engineering and Aerospace Technology, 89 (6). pp. 826-834. ISSN 17488842
Muthuselvan, G and Muralidhara, HS and Kotegar, P and Gupta, S and Shankar, S and Deekshith, M and Mourya, S and Kumar, A (2017) Computational analysis on primary breakup and deformation of kerosene jet in subsonic cross flow using VOF method. In: ASME 2017 Gas Turbine India Conference, GTINDIA 2017, 7 - 8 December 2017, Bangalore, India.
Naidu, VPS and Divya, M and Maha Lakshmi, P (2017) Multi-Modal Medical Image Fusion using Multi-Resolution Discrete Sine Transform. Control and Data Fusion e-Journal, Vol. 1 ( No. 2). pp. 13-26.
Narapureddy, P and Ananda, CM and Kumar, PK and Jaya Kumar, EP (2017) Design and implementation of fiber channel based high speed serial transmitter for data protocol on FPGA. In: 2016 IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Proceedings, 20 - 21 May 2016, Bangalore, India.
Nimbal, SS and Banker, Manisha M and Roopa, A and Varughese, B and Sundaram, R (2017) Effect of Gap Induced Waviness on Compressive Strength of Laminated Composites. In: International Conference on Advancements in Aeromechanical Materials for Manufacturing (ICAAMM-2016): Organized by MLR Institute of Technology, Telangana, India.
Pai, P. and Naidu, V.P.S. (2017) Target geo-localization based on camera vision simulation of UAV. Journal of Optics (India), 46 (4). pp. 425-435. ISSN 09728821
Parvez, I.A. and Magrin, A. and Vaccari, F. and Ashish, - and Mir, R.R. and Peresan, A. and Panza, G.F. (2017) Neo-deterministic seismic hazard scenarios for India—a preventive tool for disaster mitigation. Journal of Seismology, 21 (6). pp. 1559-1575. ISSN 13834649
Prajwal, TP and Parvez, Imtiyaz A and Kamath, K (2017) Nonlinear Analysis of Irregular Buildings Considering the Direction of Seismic Waves. In: Materials Today: Proceedings.
Prakash, B and Senthil Kumar, S and Aruna, ST (2017) Microstructure and performance of LSM/YSZ based solid oxide fuel cell cathodes fabricated from solution combustion co-synthesized powders and by solution precursor plasma spraying. Surface and Coatings Technology, 310. pp. 25-32. ISSN 02578972
Prapulla, N and Veena, S and Srinivasalu, G (2017) Development of algorithms for MAV security. In: 2016 IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Proceedings, 20 - 21 May 2016, Bangalore, India.
Premkumar, P.S. and Chakravarthy, S.B. and Jayagopal, S. and Radhakrishnan, P. and Pillai, S.N. and Kumar, C.S. (2017) Investigation of Engine Oil-cooling Problem during Idle Conditions on Pusher Type Turbo Prop Aircraft. International Journal of Turbo and Jet Engines, 34 (4). pp. 333-340. ISSN 03340082
Puttam, JK (2017) A combined implementation of overset grid and patched grid methodologies. Springer, New Delhi, pp. 477-486. ISBN 978-81-322-2741-0
Pynadath, P and Ramesh, KV and Chadaga, M (2017) Modeling and simulation of hydroelectric power projects: A case study on Mullaperiyar reservoir. International Journal of Civil Engineering and Technology, 8 (4). pp. 762-769. ISSN 09766308
Raghavendra, RM and Praneeth, KPSS and Dutta, Soma (2017) Preparation and Characterization of BaTiO3–PbZrTiO3 Coating for Pyroelectric Energy Harvesting. Journal of Electronic Materials, 46 (1). pp. 101-106. ISSN 03615235
Rajeevalochanam, P and Ganesh Banda, BV (2017) Mechanical Design and Analysis of Ceramic Stator Blades for Gas Turbine Stage. In: Materials Today: Proceedings.
Rajeevalochanam, P and Kumaran, RS and Sunkara, SNA and Kalita, N and Sharath, PP (2017) Experimental and numerical studies on a curved back transonic airfoil. In: ASME 2017 Gas Turbine India Conference, GTINDIA 2017, 7 - 8 December 2017, Bangalore, India.
Ramanathan, SG and Pradeep Kumar, B and Jayakumar, EP and Ananda, CM (2017) Design of graphics processing framework on FPGA. In: 2016 IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Proceedings, 20 - 21 May 2016, Bangalore, India.
Reddy, NS and Viswanathan, R and Chakradhar, RPS and Reddy, CN (2017) EPR and optical studies of microwave synthesized glasses containing VO2+ ions: Meta and pyrophosphate regime. Journal of Alloys and Compounds, 695. pp. 1368-1377. ISSN 09258388
Reddy Sudharshana, K and Ramachandran, A and Muralidhara, V and Srinivasan, R (2017) Simulation and experimental validation of Common Mode Voltage in Induction Motor driven by inverter using arduino microcontroller. In: Lecture Notes in Engineering and Computer Science, 5 - 7 July 2017, London, UK.
Reddy Sudharshana, K and Ramachandran, A and Muralidhara, V and Srinivasan, R (2017) Simulation with experimental measurement of voltage Total Harmonic Distortion and harmonic frequency in three-phase induction motor fed from inverter. In: Lecture Notes in Engineering and Computer Science, 5 - 7 July 2017, London, UK.
Revathi, A and Sendil, Murugan M and Sandhya, Rao and Chiranjeevi, MC and Kavitha, Rao V and Shylaja, Srihari and Dayananda, GN (2017) Investigations on tensile creep of CNT- epoxy shape memory polymer nanocomposites. International Journal of Nanotechnology, 14 (9-11). pp. 945-960. ISSN 1475-7435
Roopa, S and Narasimhan, SV (2017) Improved DCT domain variable step-size Griffith’s LMS algorithm based active noise control using observation noise cancellers for secondary path identification. International Journal of Vehicle Noise and Vibration, 13 (2). pp. 118-136. ISSN 14791471
Sahoo, PK and Dattaguru, B and Manjunatha, CM (2017) Strength Prediction of Adhesively Bonded Joints using Plastic Zone Size Criterion. In: Procedia Engineering.
Saraswat, S and Gulati, G and Bhardwaj, D and Tangri, S and Singh, Hema (2017) A novel semilumped low-pass filter having finite frequency attenuation poles with defected ground structure. In: 2016 IEEE Annual India Conference, INDICON 2016, 16 - 18 December 2016, Bangalore, India.
Sathianarayanan, A and Venkatakrishnan, L and Sharma, SD (2017) Control of low speed cavity flow using streamwise tabs at leading edge. In: AIAA SciTech Forum - 55th AIAA Aerospace Sciences Meeting, 9 - 13 January 2017, Grapevine, Texas.
Sathianarayanan, A and Verma, SB (2017) Experimental investigation of an incident shock-induced interaction near an expansion corner. Journal of Spacecraft and Rockets, 54 (3). pp. 769-773. ISSN 00224650
Selvarajan, M and Ananda, CM (2017) Quaternion based pointing algorithm for Two-Axis gimbal of micro aerial vehicles. In: 2016 IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Proceedings, 20 - 21 May 2016, Bangalore, India.
Sendil, Murugan M and Sandhya, Rao and Chiranjeevi, MC and Kavitha, Rao V and Shylaja, Srihari and Dayananda, GN (2017) Actuation of shape memory polymer composites triggered by electrical resistive heating. Journal of Intelligent Material Systems and Structures, 28 (17). pp. 2363-2371. ISSN 1045-389X
Senthil Kumar, S and Nalluri, A and Balaji, N and Shri Prakash , B and Ojha, PK and Aruna, ST (2017) Solution precursor plasma spray process: A promising route for the fabrication of Mn-Co oxide based protective coating for SOFC. Surface and Coatings Technology, 324. pp. 26-35. ISSN 0257-8972
Shikhar Jaiswal, A (2017) Shape parameterization of airfoil shapes using Bezier curves. Lecture Notes in Mechanical Engineering, PartF9. pp. 79-85. ISSN 21954356
Shreya, V and Nanda, Manju (2017) Analysing MTL Properties using NuSMV model checker. In: 2016 IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Proceedings, 20 - 21 May 2016, Bangalore, India.
Shri Prakash , B and Senthil Kumar, S and Aruna, ST (2017) Microstructure and performance of LSM/YSZ based solid oxide fuel cell cathodes fabricated from solution combustion co-synthesized powders and by solution precursor plasma spraying. Surface and Coatings Technology, 10. pp. 25-32. ISSN 0257-8972
Sibin, K P and Selvakumar, N and Kumar, A and Dey, A and Sridhara, N and Shashikala, HD and Sharma, AK and Barshilia, Harish C (2017) Design and development of ITO/Ag/ITO spectral beam splitter coating for photovoltaic-thermoelectric hybrid systems. Solar Energy, 141. pp. 118-126. ISSN 0038092X
Sibin, K.P. and Srinivas, G. and Shashikala, H.D. and Dey, A. and Sridhara, N. and Kumar Sharma, A. and Barshilia, H.C. (2017) Highly transparent and conducting ITO/Ag/ITO multilayer thin films on FEP substrates for flexible electronics applications. Solar Energy Materials and Solar Cells, 172. pp. 277-284. ISSN 09270248
Simimol, A and Anappara, AA and Barshilia, Harish C (2017) Influence of defects on electrical properties of electrodeposited Co-doped ZnO nanocoatings. Materials Research Express, 4 (1). ISSN 20531591
Sravani Chowdary, V and Ramesh Raju, N and Naidu, VPS (2017) Electro-Mechanical Actuator: A Simulation Study. Control and Data Fusion eJournal: CADFEJL, 1 (3). pp. 25-32.
Sudhakar, S and Chandankumar, A and Venkatakrishnan, L (2017) Influence of propeller slipstream on vortex flow field over a typical micro air vehicle. Aeronautical Journal, 121 (1235). pp. 95-113. ISSN 00019240
Surya, S and Singh, DB (2017) Design and development of FPGA-based MAGLEV system for a low-speed wind tunnel. Lecture Notes in Mechanical Engineering, PartF9. pp. 303-307. ISSN 21954356
Suryanarayana, GK and Dubey, R (2017) Image analyses of supersonic air-intake buzz and control by natural ventilation. Journal of Visualization. pp. 1-17. ISSN 1875-8975
Suryanarayana, G.K. and Dubey, R. (2017) Image analyses of supersonic air-intake buzz and control by natural ventilation. Journal of Visualization, 20 (4). pp. 711-727. ISSN 13438875
Swain, Niharika and Venkatesh, V and Kumar, P and Srinivas, G and Ravishankar, S and Barshilia, Harish C (2017) An experimental investigation on the machining characteristics of Nimonic 75 using uncoated and TiAlN coated tungsten carbide micro-end mills. CIRP Journal of Manufacturing Science and Technology, 16. pp. 34-42. ISSN 17555817
Tamrakar, I and Ananda, CM and Pradeep Kumar, B and Sree Ramani, PS (2017) Design and implementation of ethernet based analyzer for avionics serial bus on FPGA. In: 2016 IEEE International Conference on Recent Trends in Electronics, Information and Communication Technology, RTEICT 2016 - Proceedings, 20 - 21 May 2016, Bangalore, India.
Ugargol, R and Narayanaswamy, KS and Sesha Kumar, CV (2017) Life estimation of turbine blisk for a gas turbine engine. International Journal of Mechanical Engineering and Technology, 8 (8). pp. 393-399. ISSN 09766340
Verma, S.B. and Hadjadj, A. and Haidn, O, (2017) Origin of side-loads in a subscale truncated ideal contour nozzle. Aerospace Science and Technology, 71. pp. 725-732. ISSN 12709638
Verma, S.B. and Manisankar, C. (2017) Control of a Mach reflection-induced interaction using an array of vane-type vortex generators. Shock Waves. pp. 1-14. ISSN 09381287
Verma, SB and Manisankar, C (2017) Assessment of various low-profile mechanical vortex generators in controlling a shock-induced separation. AIAA Journal, 55 (7). pp. 2228-2240. ISSN 00011452
Viji, M. and Vikramaditya, N.S. and Verma, S.B. and Naveed Ali, - and Thakur, D.N. (2017) Characteristics of base pressure fluctuations of a typical missile configuration with a propulsive jet. Aerospace Science and Technology, 71. pp. 695-705. ISSN 12709638
Vinay, CA and Chakravarthy, B (2017) Aerothermal analysis of insulation to protect exhaust ducts of a pusher turbo prop engine aircraft. Lecture Notes in Mechanical Engineering, PartF8. pp. 843-851. ISSN 21954356
Viswanathan, S and Mohan, L and Chakravarthy, M and Mandal, Chitra and Bera, Parthasarathi and Aruna, ST and Anandan, C (2017) Carbon plasma immersion ion implantation and DLC deposition on Ni-Ti alloy. Materials and Manufacturing Processes, 33 (10). pp. 1121-1127. ISSN 10426914
Viswanathan, S. and Mohan, L. and Chakraborty, M. and Mandal, C. and Bera, P. and Aruna, S.T. and Anandan, C. (2017) Carbon plasma immersion ion implantation and DLC deposition on Ni−Ti alloy. Materials and Manufacturing Processes. pp. 1-7. ISSN 10426914
