 | Up a level |
Siva Kumar, K. and Sharanappa , Sajjan V (2011) Unsteady Compressible Flow over Heaving Bodies Using an Implicit RANS Solver. In: 2011 International Conference on Mechanical and Aerospace Engineering (CMAE 2011), March 21-23, 2011, SRM University, Modi Nagar Campus,Delhi-Meerut Road, Sikrikalan Modi Nagar, Gazhiabad, Uttar Pradesh - 201 204.
Acharya, Shrilatha and Ravishankar, S (2011) Customized CAD/CAM Data Management System for an Aircraft Development Programme. In: PLMSS-2011, 5th to 7th December 2011, Dept of Production Engineering, PSG College of Technology, Coimbatore, Tamil Nadu, India.
Ahmed, Sajeer and Mathur, NB and Manisankar, C (2011) Evaluation of aerodynamic performance of sidewall compression intake relevant to air breathing propulsion vehicles for intake flow entry at M = 3.5. Project Report. National Aerospace Laboratories, Bangalore.
Amirthan, G and UdayaKumar, A and Balasubramanian, N (2011) Thermal conductivity studies on Si/SiC ceramic composites. Ceramics International, 37. pp. 423-426. ISSN 0272-8842
Archana, Chaudhary and Barshilia, Harish C (2011) Nanometric multi-scale rough CuO/Cu(OH)2 superhydrophobic surfaces prepared by facile one step solution-immersion process: Transition to superhydrophilicity with oxygen plasma treatment. Journal of Physical Chemistry C, 115 (37). pp. 18213-18220.
Aruna, ST and Balaji, N and Rajam, KS (2011) Phase transformation and wear studies of plasma sprayed yttria stabilized zirconia coatings containing various mol% of yttria. Materials Characterization, 62. pp. 697-705.
Aruna, ST and Deshpande, Parag A and Giridhar, Madras (2011) Photocatalytic Activity of Combustion Synthesized Nanocrystalline CeAIO3. Clean - soil, air, Water, 39 (3). pp. 259-264.
Aruna, ST and Deshpande, Parag A and Giridhar, Madras (2011) Photocatalytic Activity of Combustion Synthesized Nanocrystalline CeAlO3. CLEAN-SOIL AIR WATER, 39 (3). pp. 259-264. ISSN 1863-0650
Aruna, ST and Narayanaswamy, Balaji and Prakash, Badi shri (2011) Low temperature assisted chemical coprecipitation synthesis of 8YSZ plasma sprayable powder for solid oxide fuel cells. International Journal of Hydrogen energy, 36. pp. 14963-14970.
Aruna, ST and Selvi, Ezhil V and William Grips, VK and Rajam, KS (2011) Corrosion- and wear-resistant properties of Ni-Al2O3 composite coatings containing various forms of alumina. Journal of Applied Electrochem, 41 (4). pp. 461-468. ISSN 0021-891X
Aruna, ST and Srikanth, PVK and Jamil, M Hamad and Latha, S and Rajam, KS (2011) Optimization of the Properties of Electrodeposited Ni-YSZ Composites Using Taguchi Method and Regression Analysis. Portugaliae Electrochmical Acta, 29 (1). pp. 23-37. ISSN 1647-1571
Ashoka, BS and Seenappa, - and Chandran, AP and Kanakamuthu, (2011) System Architecture of a 2 kW Variable speed generator test bed. Technical Report. National Aerospace Laboratories, Bangalore, India.
Banker, Manisha M and Harursampath, D and Naik, NG (2011) Computationally Efficient yet Accurate Analysis of Composite Plate. In: ISAMPE National Conference on Composites – INCCOM 10, 19 Nov 2011, Research and Development Establishment (Engineers), Pune.
National Aerospace Laboratories (2011) An improved solar selective coating having high thermal stability and a process for the preparation thereof. IN 3655DEL2011.
Barshilia, Harish C and Prashant, Kumar and Rajam, KS and Biswas, A (2011) Structure and optical properties of Ag-Al2O3 nanocomposite solar selective coatings prepared using unbalanced magnetron sputtering. Sol. Energy Mater. Sol. Cells, 95. pp. 1707-1715. ISSN 0927-0248
Barshilia, Harish C and Rajam, KS (2011) Sputter deposited Nanometric multi-scale rough Cd-CdO superhydrophobic thin films. Nanoscience and Nanotechnology letters, 3 (3). pp. 300-305. ISSN 1941-4900
Barshilia, Harish C and Selvakumar, N and Pillai, Nisha and Devi L, Mayura and Rajam, KS (2011) Wettability of ZnO: A comparison of reactively sputtered; thermally oxidized and vacuum annealed coatings. Applied Surface Science, 257 (9). pp. 4410-4417. ISSN 0169-4332
Basu, Bharathibai J and Chakradhar, RPS and Lakshmi, RV (2011) Effect of particle size and dopant concentration on photophysical properties of Eu3+-doped rare earth oxysulphide phosphor coatings. Spectrochimica Acta Part A , 78. pp. 783-787.
Basu, Bharathibai J and Dinesh Kumar, V (2011) Fabrication of Superhydrophobic Nanocomposite Coatings Using Polytetrafluoroethylene and Silica Nanoparticles. International Scholarly Reserch Network ISRN Nanotechnology, 2011. pp. 1-6.
Basu, Bharathibai J and Manasa, J (2011) Effect of deposition parameters on the wettability and microstructure of superhydrophobic films with hierarchical micro–nano structures. Journal of Colloid and Interface Science, 368. pp. 655-662.
Basu, Bharathibai J and Manasa, J (2011) Reversible switching of nanostructured cobalt hydroxide films from superhydrophobic to superhydrophilic state. Applied Physics A-Material Science Process, 103 (2). pp. 343-348. ISSN 0947-8396
Chakradhar, RPS and Dinesh Kumar, V and Rao, JL and Basu, Bharathibai J (2011) Fabrication of superhydrophobic surfaces based on ZnO–PDMS nanocomposite coatings and study of its wetting behaviour. Applied Surface Science, 257 (20). pp. 8569-8575. ISSN 0042-207X
Chandrakala, - and Shekar R, Indu and Kumar MN, Satheesh and Siddaramaiah, and Yaakob, Z and Rao, PM (2011) Studies on the composites produced from co-weaved poly ether ether ketone and glass fiber fabric. Journal of Composite Materials, 45 (7). pp. 741-749. ISSN 0021-9983
Chandran, AP and Kanakamuthu, and De, Manabendra M and Ashoka, BS and Dayananda, GN (2011) Procedure for commissioning and operation of the NMITLI 500kW Wind turbine system. Technical Report. National Aerospace Laboratories, Bangalore, India.
Chandranath, M and Naik, Mohan .C and Suresh, R and Ravishankar, S (2011) Development of a Customized Post Processor for Applicatio of Universal Indexing Head on a Three Axis Vertical Machining Center. In: PLMSS-2011, 5th to 7th December 2011, Dept of Production Engineering, PSG College of Technology, Coimbatore, Tamil Nadu, India.
Chattopadhyay, Lalitha (2011) Analytical solution for bending stress intensity factor from Reissner's plate theory. Engineering, 3 (5). pp. 517-524.
Chattopadhyay, Lalitha and Sridhara Murthy, S (2011) Analytical and finite element modeling simulation of buckling and postbuckling of delaminated orthotropic plates. International Journal of Modeling, Simulation and Scientific Computing, 2 (1). pp. 97-104.
Chetan S, Jarali and Raja, S and Kiefer, Bjoern (2011) Modeling the effective properties and themomechanical behavior or SMA-SMP multifunctional composite lamintes. Polymer Composites, 32 (6). pp. 910-927.
Choudhury, Balamati and Raghavendra, BJ and Jha, RM (2011) Surface Modeling of Aircraft Passenger Seats using Boeing AGPS Seat Arrangement Mapping for Boeing 787-9. Project Report. CSIR-NAL, Banaglore, National Aerospace Laboratories.
Choudhury, Balamati and Thithiksha , T and Jha , RM (2011) Ray Propagation inside Aircraft Cabin for Multiple Sources and Receivers: Application towards WELS. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Chowdhury, P and Barshilia, Harish C and Rajam, KS (2011) Anodic alumina template assisted growth of magnetic nanowire/nanodots. Technical Report. National Aerospace Laboratories.
Chowdhury, P and Boominatha Sellarajan, S and Krishnan, M and Barshilia, Harish C (2011) Fabrication of magnetic nanodot arrays using ultrathin alumina membrane (UTAM). In: AIP Conf. Proc. 1447, 19–23 December 2011, SRM University, Kattankulathur, Tamilnadu, India.
Chowdhury, P and Krishnan, M and Prashant, Kumar and Barshilia, Harish C and Rajam, KS (2011) Nano-structured exchange-spring hard magnetic thin films. In: National Conference on Sprintronic Materials: Nanostructures and Devices 2011, March 3-4, 2011, Kongu Engineering College, Erode. (Unpublished)
Chowdhury, P and Raghuvaran, K and Krishnan, M and Barshilia, Harish C and Rajam, KS (2011) Effect of process parameters on growth rate and diameter of nano-porous alumina templates. Bulletin of Materials Science, 34 (2). pp. 1-5. ISSN 0250-4707
Chowdhury, P and Sellarajan, Boominatha and Krishnan, M and Raghuvaran, K and Barshilia, Harish C and Rajam, KS (2011) In situ electrochemical thinning of barrier oxide layer of porous anodic alumina template. Advanced Science Letters, 5 (1). pp. 253-257. ISSN 1936-6612
De, Manabendra M and Ashoka, BS and Seenappa, - and Chandra, AP and Kanakamuthu, (2011) Preliminary studies of the Aero-generator for battery charging application. Technical Report. National Aerospace Laboratories, Bangalore, India.
De, Manabendra M and Kanakamuthu, and Isaac, JJ (2011) Aerodynamic design & analysis of the Innovative Tip Brake of the NMITLI 500 kW Horizontal-Axis Wind Turbine. Technical Report. National Aerospace Laboratories, Bangalore, India.
Deepthi, B and Barshilia, Harish C and Rajam, KS and Manohar, S Konchady and Devdas, M Pai and Jagannathan, Sankar (2011) Structural, mechanical and tribological investigations of sputter deposited CrN–WS2 nanocomposite solid lubricant coatings. Tribology International, 44. pp. 1844-1851.
Deepthi, B and Siju, John and Srinivas, G and Praveen, Kumar and Jakeer, Khan and Barshilia, Harish C (2011) Nanostructured Au-WS2 solid lubricant coatings prepared by magnetron sputtering. In: National Conference on Chemistry of Materials (NCCM-2011), September 28, 2011, Tumkur University. (Unpublished)
Divya , S and DB, Singh and Lakshmikanthiah, Y and Prasada Rao, K (2011) Development of 8-channel wireless data acquisition system for wind tunnel applications. Project Report. NAL, Bangalore.
Divya , S and Singh, DB and Lakshmikanthiah, Y and Rao, K Prasad (2011) Development of 8-Channel wireless data acquisition system for wind tunnel application. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Durai, Thulasi D and Viswamurthy , SR and Chaplod, Saniya and Dhami, Govind Singh and Smiti, Maini and Abhimanyu, Sharma and Krishnamoorthy, K (2011) Development of a blended wing configuration MAV. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Gopinath, R and Narayan, Shiv and Nair, RU and Jha , RM (2011) EM Performance Analysis of Metamaterial Frequency Selective Surfaces. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Gopinath, R and Narayan, Shiv and Nair, RU and Jha , RM (2011) A Review of Metamaterial Frequency Selective Surfaces. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Goyal, Anup and Saraf, Amitabh and Pashilkar, AA and Patel, Ambalal V. (2011) Analysis of effect of wake vortices on air data sensors. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Gur, Ohad and Lazar, Gali and Yaniv, Aharon and Burman, Abhishek (2011) Multidisciplinary Analysis for a Civil Aircraft Conceptual Sizing. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Guruprasad, R and Khaiser Nikam, KN (2011) Recent Trends in Electronic Information Resources Usage: Among Scientists, Engineers and Technologists - A Comprehensive Literature Review. LAP LAMBERT Academic Publishing , Mauritius/Germany/USA/UK. ISBN ISBN-10: 3846522082, ISBN-13: 978-3846522080
Guruprasad, R and Khaiser Nikam, KN and Marimuthu, P and Mudkavi, Vidyadhar Y (2011) IMPACT OF INTERNET ON SCHOLARLY COMMUNICATIONS: A SURVEY OF AEROSPACE SCIENTISTS AND ENGINEERS IN BANGALORE. Information Studies, 17 (2). pp. 65-87. ISSN Print ISSN : 0971-6726. Online ISSN : 0976-1934.
Guruprasad, R and Nikam, Khaiser and Marimuthu, P (2011) A Cross-Association Analysis of Scientific Designations (Grades) with the Extent of Use of Electronic Information Resources and the Purpose of Use of the Internet Amongst the Indian Aerospace Scientists and Engineers of Bangalore. Journal of Aerospace Sciences and Technology, 63 (3). pp. 243-258. ISSN 0972-950X
Hanoca, P and Shobhavathy, MT (2011) CFD Analysis to investigate the effect of axial spacing in a single stage transonic axial flow compressor. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Ismail, Shaik and Pashilkar, AA and Ayyagari, Ramakalyan (2011) Adaptive control of micro air vehicles. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Jayasankar, S and Senthil Kumar, P and Varghese, B and Ramanaiah, B (2011) Smart Aerodynamic Surface for a Typical Military Aircraft Using Shape Memory Elements. Journal of Aircraft, 48 (6). pp. 1968-1978. ISSN 0021-8669
Jayasankar, S and Senthil Kumar, P and Varughese, Byji and Ramanaiah, B and Satisha, Vishwanath and Ramachandra, HV and Dayananda, GN (2011) Smart Aerodynamic Surface for a Typical Military Aircraft Using Shape Memory Elements. Journal of Aircraft, 48 (6). pp. 1968-1977. ISSN 0021-8669
Jinde, P and Rajeev, G and Nagpal , Ankur (2011) Design of a special twin sting support system for force measurements on a launch vehicle model. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Jyotana Kiran, Mathad and Rao, RMVGK (2011) Studies on Highly Conducting Polypyrrole/Fe3O4 Nanocomposites. Polymer Composites.
Jyothsna, - and Kavitha, - and Sendil, Murugan and Padmavathi, T (2011) Evaluation of Conductivity Measurement Methods for Conductive Particulate Polymer Composite. Project Report. National Aerospace Laboratories, Bangalore.
Jyotsna Kiran, Mathad (2011) Studies on conductive polymer composites for advanced aerospace applications. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, University of Mysore.
Kamali, C and Pashilkar, AA (2011) Evaluation of Recursive Least Squares algorithm for parameter estimation in aircraft real time applications. Aerospace Science and Technology, 15 (3). pp. 165-174. ISSN 1270-9638
Kanakamuthu, and Chandra, AP and Ashoka, BS and Majhi, Samay and Jayaraman, M and Kumar, VS and Seenappa, and De, Manabendra M and Manjunath, MR and Isaac, JJ (2011) Field trials of the NMITLI 500 kW Horizontal-Axis Wind Turbine System. Technical Report. National Aerospace Laboratories, Bangalore, India.
Kanakamuthu, and Rajeev, KT and Chandra, AP and De, Manabendra M (2011) Aerodynamic design of the 500 W wind turbine rotor/blade. Technical Report. National Aerospace Laboratories, Bangalore, India.
Kannan, CR and Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of cracked NLG brackets. Project Report. National Aerospace Laboratories, Bangalore, India.
Kannan, R and Venu, G and Prateesh Kumar, P and Manjunath, P (2011) Development of a Mixed Bed Catalytic System for Providing Endothermic Cooling with in-situ Generation of Hydrogen Gas for Scramjet Combustors. In: ASET 2011- National Conference on Emerging Trends in Propulsion Technology, 17-18 Jun 2011, Liquid Propulsion Systems Centre (LPSC), Mahendragiri, Tamil Nadu .
Karthikeyan, K and Ramachandra, S and Vizhian, Paul S and Chandra, Satish (2011) Signal processing, wavelets and high-speed image interpretation of bird impact. Defence Science Journal, 61 (1). pp. 62-71. ISSN 0011-748X
Karthikeyan, N and Venkatakrishnan, L (2011) New approaches for analysis of jet noise data. Journal of Aerospace Sciences and Technology, 63 (1). pp. 89-106. ISSN 0972-950X
Kataria, S and Barshilia, Harish C and Praveen, Kumar and Srinivas, G and Siju, John and Jakeer, Khan (2011) Hard yet tough Ti-TiN nanocomposite coatings. Technical Report. National Aerospace Laboratories, National Aerospace Laboratories.
Kataria, S and Praveen, Kumar and Jakeer, Khan and Barshilia, Harish C (2011) Tailoring H/E ratio of Ti-TiN nano-composite coatings with improved toughness for tribological applications. In: The International Symposium on Surface Protective Coatings and Indo-German Conference on Surface Engineering, December 7, 2011, Hotel Sheraton, Bangalore . (Unpublished)
Kataria, S and Singh, Yogesh and Siju, John and Jakeer, Khan and Chowdhury, P and Barshilia, Harish C (2011) ZnO nanostructures grown by vapour-liquid-solid (VLS) method. Technical Report. National Aerospace Laboratories.
KavithaMol , S and Stanley , C Salem (2011) Parametric Studies on Bird Impact Behavior of Aircraft Leading Edges. Masters thesis, National Aerospace Laboratories, Bangalore.
Khatri, AK (2011) Aircraft Turn Maneuver using Bifurcation Analysis and Nonlinear Dynamic Inversion Control Technique. In: NATIONAL CONFERENCE ON ADVANCED CONTROL IN ENGINEERING SYSTEMS , 21-23 September 2011, M.S.Ramaiah Institute of Technology, Bangalore.
Khatri, AK and Sinha, NK (2011) Aircraft Maneuver Design using Bifurcation Analysis and Nonlinear Control Techniques. In: 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 4-7 January, 2011, Orlando, Florida.
Khirwadkar, SS and Singh, KP and Patil, Y and Khan, MS and Buch, JJU and Patel, Alpesh and Tripathi, S and Jaman, PM and Rangaraj, L and Divakar, C (2011) Fabrication and characterization of tungsten and graphite based PFC for divertor target elements of ITER like tokamak application. Fusion Engineering and Design, 86. pp. 1736-1740. ISSN 0920-3796
Kidambi, R (2011) Frequency and damping of non-axisymmetric surface oscillations of a viscous cylindrical liquid bridge. Journal of fluid Mechanics, 681. pp. 597-621.
Kodanda, B and Ashish, Verma (2011) Estimation of Origin-Destination Air Traffic Flows from Air Transport Movement Data: An Application to Indian Domestic Airport Network System. In: 2011 World Conference of Air Transport Research Society (ATRS 2011), June 29-July 2, 2011, School of Aviation, University of New South Wales (UNSW), Sydney, Australia.
Kokila, G and Vineet, Kumar (2011) A network-enabled software for offline storage and retrieval of bibliographic information of documents for C-CADD. Project Report. National Aerospace Laboratories, Bangalore, Bangalore.
Krishnan , Anjana and Ananda, CM (2011) Validation of FCOM profiles for aircraft engine flight data using neural networks. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Kumar, GV and Rao, KM and Kumar, JS and Raja, S (2011) Selective modal space control approach for smart composite cylindrical shell structure. ARPN Journal of Engineering and Applied Sciences, 6 (3). pp. 67-74. ISSN 1819-6608
Kumar, Rajan and Ali, Mohd Y and Alvi, Farukh and Venkatakrishnan, L (2011) Generation and control of oblique shocks using microjets. AIAA Journal, 49 (12). pp. 2751-2759. ISSN 0001-1452
Kumar P, Arun and Verma, SB and Elangovan, S (2011) Study of jets from rectangular nozzles with square grooves. Aeronautical Journal, 115 (1165). pp. 187-196. ISSN 0001-9240
Lathasree, P and Pashilkar, AA (2011) Digital Simulation Model for Turboprop Engine. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Loganathan, R and Veera Sesha Kumar, C and Jayaraman, M (2011) Modal Analysis of a 500 kW Wind Turbine. Project Report. National Aerospace Laboratories, National Aerospace Laboratories.
Madan, M and Bhaumik, SK and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of TGB control lever. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Bhuvana, R and Sujata, M and Bhaumik, SK (2011) Hardness survey and microstructural study of samples belonging to collector pinions of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of damages on the compressor blades of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of deposits collected from the main fuel pump of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of deposits collected from the pipelines and ECS shut-off valve of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of failed collector pinions of a Helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of burst pipe of oxygen charging trolley. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of components belonging to a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of components retrieved from the wreckage of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Mallanna, S and Sujata, M (2011) Analysis of welded samples from AP-pipeline. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Raghavendra, K and Sujata, M and Bhaumik, SK (2011) Failure analysis of welded stainless steel heat exchanger tube. Project Report. National Aerospace Laboratories, Bangalore, India, Bangalore, India.
Madan, M and Raghavendra, K and Sujata, M and Bhogle, Srinivas (2011) Analysis of debris collected from clogged filter element. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Raghavendra, K and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of compressor and gas generator blades belonging to an engine of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Analysis of engine oil debris. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Analysis of fractured bearings of wheel hub of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Failure Analysis of burst tyre of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of O-rings. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of centre perspex panel of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of nose wheel hub of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of propeller reduction gear shaft of indigenous rotary engine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of suspension device fitted with antenna of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of tail strut assembly of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of ‘O’ ring belonging to an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Metallurgical analysis of Sponson bush of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Analysis of components of aeroengine retrieved from the wreckage of an Aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Analysis of damaged aero-engine blade of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Analysis of damaged aero-engine blades. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Analysis of debris collected from the main oil filter of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Analysis of failed skin bottom of nose belly panel of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure Analysis of Bearings of Accessory Gearbox of an aero-engine. Project Report. National Aeronautical Laboratory, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure Analysis of LP turbine of an Aero-engine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of AMAGB lube pump gears. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of LH top root fitting of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of an aeroengine components. Project Report. National Aeronautical Laboratory, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of compressor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of input pinion of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of pipe assembly of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Metallurgical failure analysis of piston rings. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Microstructural study of turbine blades material of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure Analysis of Bearings and Gears of Accessory Gearbox of an Aero-engine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure Analysis of Rotor Blades of Steam Turbine Generator of a captive power plant. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of IC engine valve. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of a sheared 2” steam injection pipe of a vacuum heater. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of an engine fan and compressor blades. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of arch section tube in fired boiler of a captive power plant. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of high pressure flange in a reactor outlet. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of nose wheel assembly of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of undercarriage extension/retraction jack components of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of fractured HPTR blade of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Ranganath, VR and Bhaumik, SK (2011) Failure analysis of damaged pressure gauge/hose of an aircraft oxygen trolley. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of broken pin assembly an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of Banner Target Towing (BTT) Cables. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of first stage compressor rotor blades of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of wheel nut of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Venkataswamy, MA and Kannan, D and Bhaumik, SK (2011) Analysis of parts retrieved from the wreckage of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of outer flap of TVC heat shield. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of tail under carriage strut of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Venkataswamy, MA and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of cracked steam drum of boiler of captive power plant. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Venkataswamy, MA and Bhaumik, SK (2011) Metallurgical analysis of components of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan , M and Sujata, M and Bhaumik, SK (2011) Analysis of cracked 5" tube of vacuum heater. Project Report. National Aerospace Laboratories, Bangalore, India.
Mahendra, S Kavale and Mahadik, DB and Parale, VG and Wagh, PB and Gupta, Satish C and Rao, A Venkateswara and Barshilia, Harish C (2011) Optically transparent, superhydrophobic methyltrimethoxysilane based silica coatings without silylating reagent. Applied Surface Science, 258 (1). pp. 158-162. ISSN 0042-207X
Majeed, M and Kar, IN (2011) Identification of aerodynamic derivatives of a flexible aircraft using output error method. In: International Conference on Mechanical and Aerospace Engineering (CMAE 2011), 21-23 Mar 2011, New Delhi, India.
Majeed, M and Kar, IN (2011) Multi sensor data fusion based approach for the calibration of airdata systems. Aeronautical Journal, 115 (1164). pp. 113-122. ISSN 0001-9240
Manjunatha, CM and Jagannathan, N and Padmalatha, K and Kinloch, AJ and Taylor, AC (2011) The Effect of Micron-Rubber and Nano-Silica Particles on the Fatigue Crack Growth Behavior of an Epoxy Polymer. International Journal of Nanoscience, 10 (4&5). pp. 1095-1099. ISSN 0219-581X
Manjunatha, CM and Jagannathan, N and Padmalatha, K and Kinloch, AJ and Taylor, AC (2011) Improved variable-amplitude fatigue behavior of a glass-fiber-reinforced hybrid-toughened epoxy composite. Journal of Reinforced Plastics and Composites, 30 (21). pp. 1783-1793. ISSN 0731-6844
Manjunatha, CM and Jagannathan, N and Padmalatha, K and Kinloch , AJ and Taylor , AC (2011) Improved variable-amplitude fatigue behavior of a glass-fiber-reinforced hybrid-toughened epoxy composite. Journal of Reinforced Plastics &Composites, 30 (21). pp. 1783-1793.
Meenu, Srivastava and Basu, Bharathibai J and Rajam, KS (2011) Improving the Hydrophobicity of ZnO by PTFE Incorporation. Journal of Nanotechnology, 2011 (392754). pp. 1-6.
Meenu, Srivastava and William Grips, VK (2011) Influence of Zirconia Incorporation on the Mechanical and Chemical Properties of Ni-Co Alloys. American Journal of Materials Science, 1 (2). pp. 113-122.
Meenu , Srivastava and Basu, Bharathibai J and Rajam, KS (2011) Improving the Hydrophobicity of ZnO by PTFE Incorporation. Journal of Nanotechnology, 2011. pp. 1-6.
Mukherjee, Somenath and Manju, S (2011) An improved parametric formulation for the variationally correct distortion immune three-noded bar element. Structural Engineering and Mechanics. ISSN 1225-4568
Mukherjee, Somenath and Manju, S (2011) An improved parametric formulation for the variationlly correct distortion immune three-noded bar element. Structural Engineering and Mechanics, 38 (3). 000-000.
Mukherjee, Somenath and S, Manju (2011) An improved parametric formulation for the variationally correct distortion immune three-noded bar element. Structural Engineering and Mechanics, An International Journal, 38 (3). pp. 1-21.
Naidu, VPS (2011) Image Fusion Technique using Multi-resolution Singular Value Decomposition. Defence Science Journal, 61 (5). pp. 479-484. ISSN 0011-748X
Naidu, VPS (2011) Multi-Resolution Image Fusion by FFT. In: ICIIP 2011, 3-5 Nov. 2011, JUIT, Shimla.
Naidu, VPS (2011) Pixel- and Fetaure- Level Image Fusion Techniques. In: NACES-11, 21-23 Sep. 2011, MSRIT.
Naidu, VPS and Garlin, Delphina (2011) Assessment of Color and Infra-Red Images using No-Reference Image Quality Metrics. In: Proceedings of NCATC 2011 .
Naidu, VPS and Garlin, Delphina (2011) Detection of Airport Runway Edges using Line Detection Techniques. In: NACES-11, 21-23 Sep. 2011, MSRIT.
Naidu, VPS and Garlin, Delphina (2011) Implementation and Validation of Video Stabilization using Simulink. In: NACES-11, 21-23 Sep. 2011, MSRIT, Bangalore.
Naidu, VPS and Narayana , Rao. P. and Sudesh, K Kashyap and Shantha Kumar, N and Girija, G (2011) Experimental Study with Enhanced Vision System Prototype Unit. In: International Conference on Image Information Processing (ICIIP 2011), Shimla, India.
Naidu, VPS and Rao, Narayana P and Girija, G (2011) Enhanced and Synthetic Vision for Remotely Piloted Vehicles. In: UKIERI workshop organised by NAL.
Naidu, VPS and Rao, Narayana P and Sudesh, K Kashyap and Shantha Kumar, N and Girija, G (2011) Experimental Study with Enhanced Vision System Prototype Unit. In: ICIIP 2011, 3-5 Nov. 2011, JUIT, Shimla.
Naidu, VPS and Rao, Narayana P and Sudesh, K Kashyap and Shantha Kumar, N and Girija, G (2011) Experimental Study with Enhanced Vision System Prototype Unit- poster. In: ICIIP 2011, 3-5 Nov. 2011, JUIT, Shimla.
Narasimhan, SV and Nandini, Basumallick and Veena, S (2011) Introduction to Wavelet Transform- A signal Processing approach. In: Introduction to Wavelet Transform- a Signal Processing approach. Narosa Publishing House, Delhi. ISBN 978-81-8487-081-7
Narasimhan, SV and Veena, S (2011) New unbiased adaptive IIR filter: it’s robust and variable step-size versions and application to active noise control. Signal Image and Video Processing.
Narayan, Shiv and Arun, K and Gopinath , R and Nair, RU and Jha , RM (2011) A Review of the Radiation Characteristics of Microwave Oven and WELS Antenna. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Narayana , Rao. P. and Sudesh, K Kashyap and Girija, G and Debanjan, Mandal (2011) Situation and Threat Assessment in BVR Combat. In: AIAA Guidance, Navigation, and Control Conference, 8-11 August 2011, Portland, Oregon, USA. (Submitted)
Narayanan, Sathia and Lakshmi, RV and Basu, Bharathibai J and Raju, Channa and Venkatakrishnan, L (2011) Supersonic testing of NAL binary pressure sensitive paint. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Panda, PK (2011) Development of PZT Materials, Fabrication and Characterization of Multi Layered Actuators for Aerospace Applications. In: Proceedings of the International Workshop on Functional Materials (IWFM-2011) (AIP Conf. Proc. 1461), 20-22 Dec 2011, Berhampur, Odisha, India.
Pankaj, AC and Shivaprasad, MV and Shantini, G and Chandra, N and Nandan , A M and Manjuprasad, M (2011) Flutter prediction of a swept back plate using experimental model parameters. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Pashilkar, AA and Haijun, Rong and Sundararajan, N and Saratchandran, P (2011) Fault toleranat neuro/neuro-fuzzy controllers for aircraft auto landing with actuator failures and severe winds. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Poornima, Narayana (2011) Content management: An overview. In: Workshop on Content Management using Open Source Tool, 19-21 April 2011, NAL, Bangalore, India.
Poornima, Narayana (2011) Resource sharing, library networks and consortia. In: National Conference on Collection Management in Changing Context: Problems and Prospects, 19-20 Aug 2011, Kuvempu University, Shivamogga.
Pradeep, Shetty and Subrahmanya, MB and Kulkarni, DS and Rajani, BN (2011) CFD simulation of flow past MAV wings. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Prathapanayaka, R and Vinodkumar, N and Krishnamurthy, SJ (2011) Design, Analysis, Fabrication and Testing of Mini Propeller for MAVs. In: 5th Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), Bangalore.
Prathapanayaka, R and Vinodkumar, N and Krishnamurthy, SJ (2011) Design, analysis, fabrication and testing of mini propeller for MAVs. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Raghvendra, BJ and Choudhury, Balamati and Jha , RM (2011) Surface Modeling Studies for Manned Space Modules and Launch Vehicles. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Rajan, Kurade and Sampath, Rao (2011) Elevator Hinge moment studies over generic winged body configuration. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), 16-18 November 2011, Bangalore.
Rajashekar, C and Venkat Iyengar, S and Raghu, Kumar (2011) DEVELOPMENTAL STUDIES ON PULSEJET ENGINE. Project Report. National Aerospace Laboratories. (Submitted)
Rajashekar, C and Venkat Iyengar, S and Raghukumar, HS and Roshan , Antony and Suraj, CS and Hemant, Sharma (2011) Feasibility Studies on the power plant - MAV. [Video]
Rajinikanth, V and Venkateswarlu, K and Sen, Mani Kuntal and Das, M and Alhajeri, SN and Langdon, TG (2011) Influence of scandium on an Al–2% Si alloy processed by high-pressure torsion. Materials Science and Engineering , 528. pp. 1702-1706.
Ramaiah, KV and Saikrishna, CN and Ranganath, VR and Buravalla, V and Bhaumik, SK (2011) Fracture of thermally activated NiTi shape memory alloy wires. Materials Science and Engineering A, 528. pp. 5502-5510. ISSN 0921-5093
Ramamohan, TR and Shivakumara, IS and Madhukar, K (2011) The dynamics and rheology of a dilute suspension of periodically forced neutrally buoyant spherical particles in a quiescent Newtonian fluid at low Reynolds numbers. Fluid Dynamics Research, 43 (4). 045502. ISSN 0169-5983
Ramamurthy, S and Thennavarajan, S (2011) Development of 10 kW Micro Gas Turbine. Project Report. NAL, NAL.
Ramesh, V (2011) Unsteady meshfree solver - LSKUM-MN. In: Meshfree-2011 Conference, 10-11 Jan 2011, IISc, Bangalore.
Rana, Davinder and Patel, Sandeep and Onkar, AK and Manjuprasad, M (2011) Time domain simulation of airfoil flutter using fluid structure coupling through FEM based CFD solver. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Rangachari, Kidambi (2011) Damping of surface waves in a brimful circular cylinder with a contaminated free surface. Fluid Dynamics Research, 43. ISSN 0169-5983
Rao, Narayana P and Sudesh, K Kashyap and Naidu, VPS and Shantha Kumar, N and Girija, G (2011) An experiment on enhanced and synthetic vision system. In: Annual Seminar in Hindi, 10th August 2010, NAL.
Rao, R Anand and Nath, B and Gopinath, N and Reddy, Krishna Rakend D (2011) Reynolds Number and Leading Edge Bluntness Effects on 65° Delta Wing at Subsonic Speed. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Rathore, Rahul and Singh, Hema and Jha , RM (2011) Mutual Coupling in Adaptive Arrays. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Ravishankar, S and Dutt, HNV (2011) Form Error Evaluation by Rapid Registration Method. In: PLMSS-2011, 5th to 7th December 2011, Dept of Production Engineering, PSG College of Technology, Coimbatore, Tamil Nadu, India.
Roshan, Antony and Veera Sesha Kumar, C and Antony, Michael and Jayaraman, M (2011) Structural Design Analysis of a 500 kW Wind Turbine. Project Report. National Aerospace Laboratories, National Aerospace Laboratories.
Saijal , KK and Ganguli, Ranjan and Viswamurthy , SR (2011) Optimization of Helicopter Rotor Using Polynomial and Neural Network Metamodels. Journal of Aircraft, 48 (2). pp. 553-566. ISSN 0021-8669
Sakthi Sathya, P S and Jain, Saransh and Viswamurthy , SR and Kotresh, Gaddikeri M and Ramesh, Sundaram (2011) Prediction of Strains in the Debond Region of a Composite Box Structure. In: National Conference on Advances in Composites & Solid Mechanics, 7-8 December 2011, Sardar Vallabhai Patel Institute of Technology, Vasad, Gujarat.
Sandeep, P and Shreyamsha Kumar, B K and Narasimhan, SV (2011) 2D-spectral estimation based on DCT and modified magnitude group delay. SIViP.
Sateesh, VL and Jayasankar, S and Ramaswamy, Setty J and Srikanth, L and Mohan Kumar, K (2011) Structural Design & Analysis of The Innovative Tip Brake of the NMITLI 500 kw Wind Turbine System. Project Report. National Aerospace Laboratories, Bangalore.
Sathish, S and Geetha, M and Aruna, ST (2011) Studies on plasma sprayed bi-layered ceramic coating on bio-medical Ti-13Nb-13Zr alloy. Ceramic Intternational, 37 (4). pp. 1333-1339.
Sathish, S and Geetha, M and Aruna, ST and Balaji, N and Rajam, KS and Asokamani, R (2011) Sliding wear behavior of plasma sprayed nanoceramic coatings for biomedical applications. Wear, 271 (5-6). pp. 934-941. ISSN 0043-1648
Sathish, S and Geetha, M and Aruna, ST and Balaji, N and Rajam, KS and Asokamani, R (2011) Studies on plasma sprayed bu-layered ceramic coating on bio-medical Ti-13Nb-13Zr alloy. Ceramic International, 37. pp. 1333-1339.
Sathiyamoorthy, K and Srinivas, J and Baskaran, M and Manjunath, P (2011) Development of Gasdynamic Probe for Total Temperature Measurement in gases. In: SET 2011- National Conference on Emerging Trends in Propulsion Technology, 18 Jun 2011, LPSC, Mahendragiri.
Senthil Kumar, K and Ramesh, G and Srinivasan, KV (2011) First Pilot View (FPV) Flying UAV Test Bed for Acoustic and Image Data Generation. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Senthil Kumar, P and Jayasankar, S and Kamaleshaiah, MS and Prashanth, NS and Paulsingh, Alfred and Dayananda, GN (2011) Development and Wind Tunnel Evaluation of a SMA Based Trim Tab Actuator for a Civil Aircraft. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Senthilkumar, P and Jayasankar, S and Satisha, Vishwanath and Kamaleshaiah, MS and Prashanth, NS and Alfred Paul, Singh and Dayananda, GN (2011) Development and Wind Tunnel Evaluation of an SMA Based Trim Tab Actuator for a Civil Aircraft. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore.
Sharanappa, Sajjan V and Padmanabhan, MA and Mandal, S and SenGupta, G and Dutta, PK (2011) Unsteady RANS based impulse response studies of AGARD wing for aeroelastic and flutter analysis. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Sharma, Niyati and Singh, Hema and Jha , RM (2011) Pattern Synthesis of Uniform/Non-Uniform Array using Weighted Least Square Algorithm. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Shivamurti, M and Narasimhan, SV (2011) A Dual Tree Complex Discrete Cosine Harmonic Wavelet Transform (ADCHWT) and Its Application to Signal/Image Denoising. Journal of Signal and Information Processing (2). pp. 218-226. ISSN 2159-4481
Shobhavathy, MT (2011) CFD analysis to investigate the effect of axial spacing in a single stage transonic axial flow compressor. In: International Symposium on Applied Aerodynamics and Design of Aerospace Vehicle , 16-18 Nov 2011, Bangalore, India.
Shri Prakash , B and Balaji, N and William Grips, VK and Aruna, ST (2011) Effect of Feedstock Powders on the Microstructural and Electrical Characteristics of 8 mol% Yttria-Stabilized Zirconia Plasma-Sprayed Coatings. Journal of Thermal Spray Technology, 21 (6). pp. 1300-1308. ISSN 1059 9630
Simimol, A and Sellarajan, Boominatha and Siju, John and Manikandanath, NT and Chowdhury, P and Barshilia, Harish C (2011) Controlled synthesis and characterization of highly-oriented ZnO nanorods by electrodeposition method. Technical Report. National Aerospace Laboratories.
Singh, AK and Liermann, HP (2011) Strength and elasticity of niobium under high pressure. Journal of Applied Physics, 109 (113539). pp. 1-9. ISSN 0021-8979
Singh, Akansha and Viswamurthy , SR (2011) Interlaminar Fracture Toughness Characterization of Unidirectional Carbon Fiber Reinforced Epoxy Composites. Project Report. CSIR-NAL, Bangalore.
Singh, DB and Suprabha, PS and Gopinath, PR and Muralidhara, HS and Mohan, SR and Koner, D (2011) Calibration of conical mass flow control device for air intake model tests. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Singh, Hema and Choudhury, Balamati and Narayan, Shiv and Jha, RM (2011) RF Field Simulation inside a Closed Cuboid due to a Cable-based Leaky Feeder (LCX) Antenna. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Singh, Hema and Dash, Silajeet and Jha , RM (2011) Boeing EM Simulation Project: Frequency Domain RF Mapping inside Cuboid and Aircraft Passenger Cabin. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Singh, Hema and Sneha, HL and Jha , RM (2011) Estimation of In-Band Radar Cross Section (RCS) of Phased Array with Parallel-Feed Network. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Singh, Hema and Sneha, HL and Jha , RM (2011) Estimation of In-Band Radar Cross Section (RCS) of Phased Array with Series-Feed Network. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Singh, Jatinder and Saraf, Amitabh and Patel, Vijay V and Basappa, - and Tharewal, Sachin (2011) Application on system identification techniques to Tejas flight test data. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Singh, KP and Pandya, SP and Khirwadkar, SS and Patel, Alpesh and Patil, Y and Buch, JJU and Khan, MS and Tripathi, S and Pandya, S and Govindarajan, J and Jaman, PM and Rathore, Devandra and Rangaraj, L and Divakar, C (2011) Pre-qualification of brazed plasma facing components of divertor target elements for ITER like tokamak application. Fusion Engineering and Design, 86. pp. 1741-1744. ISSN 0920-3796
Singh, Manish K (2011) Modified CIR Scheme for Mesh-free Euler Solver. In: Meshfree-2011 Conference, 10-11 January 2011, Aerospace Department, Indian Institute of Science, Bangalore.
Singh, Manish K and Dhanalakshmi, K and Mathur, JS (2011) Characterization of RTA 21463 Wing and Estimation of Drag divergence Mach number. Project Report. CSIR-NAL, Bangalore.
Singh, Manish K and Dhanalakshmi, K and Mathur, JS (2011) Investigation of two dimensional flow past multi element airfoils for general transport aircraft. International Journal of Numerical Methods for Heat & Fluid Flow, 21 (8). 1026 -1049. ISSN 0961-5539
Singh, Manish K and Dhanalakshmi, K and Meenakshi, and Mathur, JS (2011) Drag divergence Mach number for NCAD-21463 Wing with 20 leading edge sweep angle. Project Report. CSIR-NAL, Bangalore.
Singha, Sintu and Sinhamahapatra, KP (2011) Control of vortex shedding from a circular cylinder using imposed transverse magnetic field. International Journal of Numerical Methods for Heat & Fluid Flow, 21 (1). pp. 32-45. ISSN 0961-5539
Sinha, RP and Jarali, Chetan S and Raja, S (2011) Modelling the thermomechanical behaviour of shape memory polymer materials. Indian Journal of Engineering and Materials Sciences, 18. pp. 15-23. ISSN 0971-4588
Siva Kumar, K and Sharanappa, Sajjan V (2011) Unsteady Flow past a Combined Pitching and Plunging Aerofoil using an Implicit RANS Solver. In: International Conference on Mechanical and Aerospace Engineering (CMAE 2011), 21-23 Mar 2011, New Delhi, India.
Siva Kumar , K and Sharanappa, Sajjan V (2011) Unsteady Compressible Flow over Heaving Bodies Using an Implicit RANS Solver. Applied Mechanics and Materials, Vols. . pp. 4589-4597. ISSN ISSN: 1662-7482
Siva Kumar , K and Sharanappa, Sajjan V (2011) Unsteady Flow past a Combined Pitching and Plunging Aerofoil using an Implicit RANS Solver. In: 2011 International Conference on Mechanical and Aerospace Engineering (CMAE 2011), March 21-23, 2011, SRM University, Modi Nagar Campus, Delhi-Meerut Road, Sikrikalan Modi Nagar, Gazhiabad, Uttar Pradesh - 201 204.
Siva Kumar , K and Sharanappa, Sajjan V (2011) Unsteady Flow past a Combined Pitching and Plunging Aerofoil using an Implicit RANS Solver. Applied Mechanics and Materials, Vols. . pp. 3481-3488. ISSN 1662-7482
Srikanth, L and Chandran, AP and Kanakamuthu, and Ramaswamy, Setty J and Balamurugan, G and Vinod Kumar, K and Dayananda, GN (2011) Design of Modified Winch System for The NMITLI 500 kw wind turbine system. Project Report. National Aerospace Laboratories, Bangalore.
Srikanth, L and Chandran , AP and Kanakamuthu, and Ramaswamy, Setty J and Balamurugan, G and VinodKumar, K and Dayananda, GN (2011) Modifications of The INMITLI 500 kW Wind Turbine Tower and Gin Pole. Project Report. National Aerospace Laboratories, Bangalore.
Srikanth, L and Rajendra Prakash, M and Sateesh, VL and Dayananda, GN (2011) Experimental studies On Glass Microballoon Filled Epoxy Composites. Project Report. National Aerospace Laboratories, Bangalore.
Srikanth, L and Rao, RMVGK (2011) Concurrent studies on Braided and Filament wound carbon fibre composites - a comparative appraisal. Concurrent studies on braided and filament wound carbon fibre composites - a comparative appraisal, 30 (16). pp. 1359-1365.
Srinivas, J and Manjunath, P (2011) Experimental Demonstration of the Concept of Endothermic Fuels for Providing Efficient Cooling to Scramjet Combustors. In: INTERNATIONAL CONFERENCE ON ADAPTIVE TECHNOLOGIES FOR SUSTAINABLE GROWTH, 16 Jun 2011, Namakkal, Tamil Nadu, India.
Stanley , C Salem and Viswamurthy , SR and Ramesh, Sundaram (2011) Prediction of Bird Impact behavior of a wing leading edge through Different bird models using Altair RADIOSS. In: Altair Hyperworks users Conference.
Sudhakar, S and Mishra , Shashank and Ramesh, G and Madhavan, KT and Ahmed, Sajeer (2011) Experimental Studies on SM4308 Airfoil at Low Reynolds Numbers. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Sujata, M and Madan, M and Bhaumik, SK (2011) Analysis of Rubber ‘O’ Ring Installed on ESN: 690 124. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Bhaumik, SK (2011) Analysis of crash helmet and survival kit items of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Bhuvana, R (2011) Examination of a damaged printed circuit board. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Raghavendra, K and Bhaumik, SK (2011) Failure Analysis of Nose LG Door Port of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of axial compressor rotor stage III of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of frame separation device of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of I stage compressor rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Metallurgical Failure Analysis of Collector Pinion of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Metallurgical Failure Analysis of Cracked ARIS Casing Ring of a Helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Metallurgical failure analysis of inter-rotor and inter-shaft bearings of aeroengines. Project Report. National Aerospace Laboratories, Bangalore, India.
Suryanarayana, GK (2011) Effect of flare angle and natural ventilation on the aerodynamic characteristics of a typical re-entry body at subsonic and transonic mach numbers. Journal of Aerospace Sciences and Technology, 63 (4). pp. 1-7. ISSN 0972-950X
Suryanarayana, GK and Nagarajan, V (2011) Effective of Passive Devices in Alleviation of Flow-induced oscillations of he nozzles of a Multi-Booster Launch vehicle. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011)), 16-18 November 2011, Bangalore.
Thawre, MM and Paretkar, RK and Peshwe, DR and Ramesh, Sundaram and Manjunatha, CM (2011) Construction of constant fatigue life diagram for a carbon fiber composite. Transactions of The Indian Institute of Metals, 64 (3). pp. 301-303.
Thennavarajan, S (2011) DESIGN, FABRICATION AND TESTING OF STARTING SYSTEM FOR MICRO GAS TURBINE. Project Report. National Aerospace Laboratories, National Aerospace Laboratories.
Thennavarajan, S and Ramamurthy, S and Rajendran, R and Rajesh , E and Janaki Rami Reddy, M and Pandian , K and Daniel , Manoharan (2011) Technical Specification of Vapour Compression Refrigeration System (VCRS) Test Rig for “Generation of design data on Compact Plate-Fin Heat Exchanger cores. Project Report. NAL, NAL.
Thithiksha , T and Patnaik, Digbala and Choudhury, Balamati and Jha , RM (2011) Ray Propagation inside a Manned Space Module. Technical Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Thomas, Jim and Viji, M and Jagadeesh, G (2011) Dielectric barrier discharge for aerodynamic flow control. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Thulasi Durai, D and Viswamurthy , SR and Vinoth, M and Balasubramaniam, - and Mohan, Kumar M and Dayananda, GN (2011) Development of a damage tolerant truss based composite empennage box. In: Proceedings of XII NASAS, 23-24, Sept 2011, IIT, Kanpur, India.
UdayaKumar, A and Balasubramanian, M and Gopala, HB and Sampathkumaran, P and Seetharamu, S and Babu, Ramesh and Sathiyamoorthy, D and Reddy, GR (2011) Influence of the type of interface on the tribological characteristics of ICVI generated SiCf/SiC composites. Wear, 271. pp. 859-865. ISSN 0043-1648
UdayaKumar, A and Ganesh, A (2011) Effect of intermediate heat treatment on mechanical properties of SiCf/SiC composites with BN interphase prepared by ICVI. Journal of the European Ceramic Society, 31 (6). pp. 1145-1153. ISSN 0955-2219
UdayaKumar, A and Raole, PM and Balasubramanian, M (2011) Synthesis of tailored 2D SiCf/SiC ceramic matrix composites with BN/C interphase through ICVI. Journal of Nuclear Materials, 417 (1). pp. 363-366. ISSN 0022-3115
Vanaja, A and Jyothsna, - and Padmavathi, T and David, T (2011) Effect of Fibre Weight Fraction on the Electrical conductivity of Continuous fibre Reinforced Conductive Composites. Project Report. National Aerospace Laboratories, Bangalore.
Venkata Ramaiah, K and Saikrishna, CN and Bhaumik, SK and Bhagyaraj, J and Gouthama, - (2011) TEM Studies on the Microstructural Changes during Thermomechanical Cycling of NiTi Shape Memory Alloy Wire. Materials Science Forum, 702-70. pp. 904-907.
Venkatakrishnan, L (2011) The Need and Impetus toward more Non-Intrusive Measurements in Indian Wind Tunnels. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011) November 2011, Bangalore, India..
Venkatakrishnan, L and Karthikeyan, N and Mejia, K (2011) Experimental studies on a rudimentary four-wheel landing gear. AIAA 2011-354. In: 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 4-7 January, 2011, Orlando, Florida.
Venkatakrishnan, L and Wiley, Alex and Kumar, Rajan and Alvi, Farukh (2011) Density field measurements of a supersonic impinging jet with microjet control (AIAA -53420-753). AIAA Journal, 49 (2). pp. 432-438. ISSN 0001-1452
Verma, SB and Raju, Channa and Manisankar, C (2011) Shock-Wave Boundary-Layer Interaction Study on a 20' Compression Corner Using PSP and Kulites. Project Report. National Aerospace Laboratories, Bangalore.
Verma, SB and Stark, R and Genin, C and Haidn, O (2011) Cold gas dual-bell tests in high-altitude simulation chamber. Shock Waves, 21. pp. 131-140.
Verma, SB and Stark, R and Haidn, O (2011) Gas density effects on dual-bell transition behavior. In: 4th European Conference for AeroSpace Sciences (EUCASS), 4-8 Jul. 2011, St. Petersburg, Russia.
Verma, SB and Viji, M (2011) Freestream effects on base pressure development of an annular plug nozzle. Shock Waves, 21 (2). pp. 163-171.
Viswamurthy , SR and Verma, KK and Madhusudan , SP and Kumar, Dinesh (2011) A Study on Co-cured T-joint with Flange/Skin Debond. In: XVII National Seminar on Aerospace Structures, 22-24 September 2011, IIT-Kanpur.
Yanamashetti, Gireesh and Murthy, Sundara H (2011) Application of Global Regression Method for Calibration of Wind Tunnel Balances. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Yanamashetti, Gireesh and Murthy, Sundara H (2011) Application of global regression method for calibration of wind tunnel balances. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
