 | Up a level |
Chandrashekar, KR and Muthuvel, S and Manoharan, LC (1984) Fibre optics for analog applications. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Divakar, C and Mohan, Murali (1984) The kinetics of pressure induoed fcc-bcc transformation in ytterbium. Journal of Applied Physics., 56. pp. 2337-2340.
Giridhar, A and Mahadevan, Sudha and Singh, AK (1984) Elastic properties of As-Sb-Se glasses. Bulletin Material Science, 6. pp. 1001-1007.
Giridhar, A and Mahadevan, Sudha and Singh, AK (1984) Measurement of elastic constants of isotropic solids. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Giridhar, A and Narasimham, PSL and Mahadevan, Sudha and Singh, AK (1984) Dilatometric measurements on solids. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Giridhar, A and Narasimham, PSL and Mahadevan, Sudha and Singh, AK (1984) Preparation and characterisation of IR transmitting glasses. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Lakshminarayana, HV (1984) Study of interlaminar fracture in unidirectional composite materials. In: Analysis of Structures - A Commemorative volume published on the occasion of the 60th Anniversary of Dr. S.R.Valluri, Dec 1984, NAL, Bangalore, India.
Lakshminarayana, HV (1984) A symmetric rail shear test for mode II fracture toughness (G/IIc) of composite materials - Finite element analysis. Journal of Composite Materials, 18. pp. 227-238. ISSN 0021-9983
Lakshminarayanan, V and Rajagopalan, SR (1984) AC current perturbation techniques for measurement of corrosion rate. 13;. Transactions of the SAEST (Society for Advancement of Electrochemical Science and Technology), 19 (1). pp. 15-21.
Mahadevan, Sudha and Giridhar, A and Narasimham, PSL and Singh, AK (1984) Dilametric studies on Ge-Sb-Se classes. Journal of Non-Crystalline Solids, 65. pp. 233-240.
Mani, A and Kalyani, Vijayan (1984) Deformation-induced structural transformation in 99.2% pure ytterbium. Current Science, 53 (1). pp. 28-30.
Mathur, NB (1984) Effects of under expanded jet on afterbody drag of an axisymmetric configuration. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Mathur, NB and Ramakrishnan, MS (1984) A rig for testing afterbodies of aerospace vehicles in presence of j e t in 0.3m trisonic wind tunnel. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Murthy, HS (1984) Analysis of unsteady pressure measurements on a supercritical airfoil with a harmonically oscillating trailing edge flap at subsonic and transonic speeds. In: Forschungsbericht - Deutsche Forschungs- und Versuchsanstalt fur Luft-, 1984, Germany.
Murthy, Sridhara S (1984) Triangular thin shell finite element for laminated general shells. In: Analysis of Structures - A Commemorative volume published on the occasion of the 60th Anniversary of Dr. S.R.Valluri, Dec 1984, NAL, Bangalore, India.
Murthy, VVS and Vijayan, Kalyani (1984) Computer programs 'FOURIER' and 'ALPLOT' for x-ray line profile analysis. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Murugesan, K and Ramamurthy, S (1984) Theoretical Evaluation of Turbine Blade Profiles. Project Report. NAL, NAL Bangalore.
Narasimha, R (1984) The prospects of turbulence management. In: 13th Fluid Mechanics and Fluid Power Conference, 12 Dec 1984, Thiruchirapalli, India.
Pai, BR (1984) Utilisation of sludge gas for power generation through aero gas turbines. 13;. Sadhana - Academy Proceedings in Engineering Sciences, 7 (pt 3). pp. 223-236.
Pai, BR and Ramachandran, BR and Velpari, V and Balasubramanian, N (1984) Preparation of boron trichloride. 13;. Indian Journal of Technology, 22 (6). pp. 233-235.
Prathap, Gangan (1984) Field consistency and the finite element analysis of multi-field structural problems. In: Analysis of Structures - A Commemorative volume published on the occasion of the 60th Anniversary of Dr. S.R. Valluri, Dec 1984, NAL, Bangalore, India.
Prathap, Gangan (1984) An optimally constrained 4 node quadrilateral thin plate bending element. Computers and Structures, 18 (5). pp. 789-794. ISSN 0045-7949
Raju, KN and Sunder, R (1984) Research and development in the field of fatigue and fracture mechanics at the National Aeronautical Laboratory. In: Analysis of Structures - A Commemorative volume published on the occasion of the 60th Anniversary of Dr. S.R.Valluri, Dec 1984, NAL, Bangalore, India.
Raju, KN and Sunder, R (1984) Unified approach for modelling fatigue crack growth and some observations on behaviour under flight simulation loading. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Ram, Mohan VS and Srinathkumar, S (1984) Finite state modelling of a multipoint structural loading system. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Ramamurthy, S and Murugesan, K (1984) Theoretical Evaluation of Rotor Blade Profiles. Technical Report. NAL, NAL Bangalore. (Submitted)
Ramamurthy, S and Murugesan, K (1984) Theoretical Evaluation of Stator Blade Profiles. Technical Report. NAL, NAL Bangalore. (Submitted)
Ramamurthy, S and Murugesan, K (1984) Turbomachinery Blade Profile Design. Technical Report. NAL, NAL Bangalore. (Submitted)
Rao, Babu MN (1984) Three-Dimensional Stress problem of a finite thick plateE with a through crack under tension.13;. In: 6th International Conference on Fracture (ICF6)., New Delhi, India.
Rao, RMVGK and Balasubramanian, N (1984) Hygrothermal effects on the fracture of coated and uncoated polymer-composites. Advances in Fracture Research, 4. pp. 2989-2996.
Rao, RMVGK and Balasubramanian, N and Manas, Chanda (1984) Factors affecting moisture absorption in polymer composites. I - Influence of internal factors. II - Influence of external factors. Journal of Reinforced Plastics and Composites, 3. pp. 232-253.
Rao, RMVGK and Chanda, Manas and Balasubramanian, N (1984) Factors Mfecting Moisture Absorption in Polymer Composites13; Part ll: Influence of External Factors. Journal of Reinforced Plastics and Composites, 3. pp. 246-253. ISSN 0731-6844
Renukadevi, M and Murali, S and Viswanathan, R (1984) A statistical analyser for noise signals. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Sankar, N and Madhavan, Chinmayee and Dasannacharya, BS and Rajanna, D (1984) Friction and wear monitoring system. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Sekhar, JA and Mohan, M and Divakar, C and Singh, AK (1984) Rapid solidification by application of high pressure. Scripta Materialia, 18. pp. 1327-1330.
Sekhar, JA and Mohan, Murali and Divakar, C and Singh, AK (1984) Rapid solidification by application of high pressure. Materials Research Society Symposium Proceedings, 22. pp. 77-80.
Shankar, PN (1984) How to make a telescope. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Shankar, PN (1984) A note on a class of exact solutions in invisced rotational flows. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Shukla, Arvind and Rao, RMVGK (1984) Curing Studies on Modified Epoxy and Unsaturated Polyester Resins. Journal of Applied Polymer Science, 29. pp. 1553-1558. ISSN 0360-6834
Sinha, UN and Sarasamma, VR (1984) Calculation of axisymmetric transonic small perturbation equation using conservative scheme. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Somashekar, BR and Nanjunda Ram, CS (1984) Non-dimensional design data for cantilever swept plates. Institution of Engineers, 64. pp. 193-198.
Somashekar, BR and Ram, Nanjunda CS (1984) Analysis of swept plates with structural reduction using transition element concept. Computers and Structures, 18 (3). pp. 409-416. ISSN 0045-7949
Sridhar, MK and Basavarappa, G and Kasturi, SG and Balasubramanian, N (1984) Mechanical properties of jute polyester composites.13;. Indian Journal of Technology, 22 (6). pp. 213-215.
Subba Rao, M and Chandra, Ramesh (1984) Experimental investigation of behaviour of a typical riveted finite joint. In: Analysis of Structures - A Commemorative volume published on the occasion of the 60th Anniversary of Dr. S.R.Valluri, Dec 1984, NAL, Bangalore, India.
Subramanian, NR and Chakrabartty, SK (1984) Computation of inviscid transonic flow past aerofoils using body fitted coordinates. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Sundaresan, NJ (1984) The interaction of fracture and stresswaves in brittle material - An experiment to verify cleaving waves. International Journal of Fracture, 24. R19-R21. ISSN 0376-9429
Sunder, R (1984) AUTOMATED BATCH PROCESSING OF FATIGUE CRACK PROPAGATION TESTS.13;. In: 6th International Conference on Fracture (ICF6)., 4-10 Dec 1984, New Delhi.
Sunder, R (1984) System for automated crack growth testing under random loading. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Sunder, R and Raju, K (1984) Computer analysis of loading data for fatigue evaluation and testing. Society of Environmental Engineers, Journal, 23 (1). pp. 49-54. ISSN 0374-356X
Sunder, R and Seetharam, SA and Bhaskaran, TA (1984) Cycle counting for fatigue crack growth analysis 13; 13;. International Journal of Fatigue, 6. pp. 147-156. ISSN 0142-1123
Upadhya, AR and Somashekar, BR (1984) Review of Launch Vehicle Related Aeroelastic Instability Studies at HAL. In: Analysis of Structures - A Commemorative volume published on the occasion of the 60th Anniversary of Dr. S.R.Valluri, Dec 1984, NAL, Bangalore, India.
Ushadevi, S and Singh, AK (1984) Pressure induced structural transformation in thulium monotelluride. Solid State Communications, 52 (3). pp. 303-305.
Ushadevi, S and Singh, AK (1984) The pressure-volume relation of ytterbium up to 9GPa. Bulletin of Materials Science, 6 (2). pp. 395-403.
Yajnik, KS (1984) Impact of developments in electrical sciences on certain engineering disciplines and implications on engineering education. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Yajnik, KS (1984) Integral transforms and boundary layers. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Yajnik, KS (1984) Turbulent boundary layers perturbed by embedded bodies. In: 2nd Asian Congress of Fluid Mechanics, 25--29 October, 1983, Beijing, China.
