 | Up a level |
Akshatha, HT and Rinku, A and Gopalakrishnan, R (2014) DESIGN, DEVELOPMENT AND VALIDATION OF FIRE PROTECTION SCHEME FOR THE ENGINE FIREWALLS AND COWLING OF A TYPICAL LIGHT TRANSPORT AIRCRAFT. ARPN Journal of Engineering and Applied Sciences, VOL. 9 (NO. 4). pp. 415-418. ISSN 1819-6608
Akshatha, HT and Rinku, A and Shankar, ML and Banakara, Prashanth (2014) DESIGN, DEVELOPMENT, SIMULATION AND REALIZATION OF EXPANSION JOINTS IN ECS ENGINE BLEED SYSTEM FOR A TYPICAL LIGHT TRANSPORT AIRCRAFT. ARPN Journal of Engineering and Applied Sciences, VOL. 9 ( NO. 5). pp. 682-686. ISSN 1819-6608
Amitha Rani, BE and Somaiah, D and Megha, - and Poddar, M (2014) Scratch Cell Test: A Simple, Cost Effective Screening Tool to Evaluate Self-Healing in Anti-Corrosion Coatings. Journal of Materials Engineering and Performance, 23 (9). pp. 3328-3335. ISSN 1544-1024
Aruna, ST and Diwakar, S and Anjana, Jain and Rajam, KS (2005) Comparative study on the effect of current density on Ni and Ni-Al nanocomposite coatings produced by electrolytic deposition. Surface Engineering, 21 (3). pp. 209-214. ISSN 0267-0844
Aruna, ST and Muniprakash, M and William Grips, VK (2013) Effect of titania particles preparation on the properties of Ni–TiO2 electrodeposited composite coatings. Journal of Applied Electrochemistry, 43 (8). pp. 805-815. ISSN 0021-891X
Balakrishnan, B and Raja, S and Rajagopal, A (2021) Influence of MWCNT fillers on vibroacoustic characteristics of polymer nanocomposite and coated aircraft panels. Applied Acoustics, 172. ISSN 0003682X
Balakrishnan, B and Rajagopal, A and Raja, S (2021) Vibroacoustic performance assessment of aircraft panels in low, mid and high frequency regimes. Mechanics of Advanced Materials and Structures, 29 (20). pp. 2942-2961. ISSN 15376494
Balaraju, JN and Anandan, C and Rajam, KS (2005) Electroless deposition of ternary Ni-W-P alloys from sulphate and chloride based baths. Surface Engineering, 215 (20). pp. 215-220. ISSN 0267-0844
Balaraju, JN and Kalavati, - and Rajam, KS (2009) Surface morphology and structure of electroless ternary NiWP deposits with various W and P contents. Journal of Alloys and Compounds, 486. pp. 468-473. ISSN 0925-8388
Balasubramanian, TS and Subramanian, G (1985) On the performance of a four-degree-of-freedom per node element for stepped beam analysis and higher frequency estimation. Journal of Sound and Vibration., Vol. 9. pp. 563-567.
Bapu Rao, MN and Murthy, MVV (1971) On the stresses in the vicinity of an elliptic hole in a cylindrical shell under torsional loading. Nuclear Engineering and Design, 17 (3). pp. 309-321. ISSN 0029-5493
Bapu Rao, MN and Subba Rao, M and Sethuraman, Geetha and Suseela, GR (1986) Improved procedure for the determination of apparent strain. Nuclear Engineering and Design, 92 (1). pp. 27-36. ISSN 0029-5493
Barat, K and Shivaprasad, S and Kar, SK and Tarafder, S (2019) Low-cycle fatigue of IN 718: Effect of waveform. Fatigue and Fracture of Engineering Materials and Structures, 42 (12). pp. 2823-2843. ISSN 8756758X
Basava Raju, B (1966) Vibration of thin elastic plates of linearly variable thickness (Natural frequencies and node patterns for clamped and simply supported square plates of linearly variable thickness solved by finite-difference approximation, using pulsed-air vibrator). International Journal of Mechanical Sciences, 8 (2). pp. 89-100.
Behera, A and Thawre, MM and Ballal, A and Manjunatha, CM and Krishnakumar, D and Chandankhede, S (2022) A modified piecewise linear constant life diagram for fatigue life prediction of carbon fiber/polymer multidirectional laminates. Polymer Composites. ISSN 02728397
Bera, Parthasarathi and Seenivasan, H and Rajam, KS and Shivakumara, C and Parida, SK (2013) Characterization and microhardness of Co-W coatings electrodeposited at different pH using gluconate bath: A comparative study. Surface and Interface Analysis, 45 (6). pp. 1026-1036.
Bhandari, SK (1974) General criterion of fracture of cracked plates. International Journal of Fracture, 10. pp. 276-278. ISSN 0376-9429
Bhashyam, GR and Prathap, Gangan (1980) Galerkin finite element method for non-linear beam vibrations. Journal of Sound and Vibration, 72 (2). pp. 191-203. ISSN 0022-460X
Chandra, R (1976) Large deflection vibration of cross-ply laminated plates with certain edge conditions. Journal of Sound and Vibration, 47 (4). pp. 509-514. ISSN 0022-460X
Chandra, R (1975) Postbuckling analysis of crossply laminated plates. AIAA Journal, 13. pp. 1388-1389. ISSN 0001-1452
Chandra, R (1971) A note on orthotropic annular circular plate of uniform stress (Thickness function corresponding to constant velocity loading condition for orthotropic annular circular plate with uniform stress). Journal of the Aeronautical Society of India, 23 (3). pp. 167-168.
Chandra, Ramesh and Basava Raju, B (1970) Stresses around a circular hole in a shallow conical shell with torsional loading. International Journal of Solids and Structures, 6 (10). pp. 1389-1401.
Chandra, Ramesh and Murthy, MVV and Ramamurthy, TS and Rao, AK (1985) Analytical estimation of stress intensity factors in patched cracked plates. Engineering Fracture Mechanics, 21 (1). pp. 479-494. ISSN 0013-7944
Chandra, S (1998) Information extraction and qualitative descriptions from13; dynamic simulation data. Computers and Structures, 69. pp. 757-766.
Chandra, S (1997) A tutorial and diagnostic tool for chaotic oscillators and time series13;. Computers and Graphics, 21 (2). pp. 253-262.
Chandra, Satish and Prathap, Gangan (1989) A field-consistent formulation for the eight-noded solid finite element. Computers and Structures, 33 (2). pp. 345-355. ISSN 0045-7949
Chandrasekhar, M and Sunitha, DV and Dhananjaya, N and Nagabhushana, H and Sharma, SC and Nagabhushana, BM and Shivakumara, C and Chakradhar, RPS (2012) Structural and phase dependent thermo and photoluminescent properties of Dy(OH)(3) and Dy2O3 nanorods. Materials Research Bulletin, 47 (8). pp. 2085-2094. ISSN 0025-5408
Chattopadhyay, Lalitha (2003) Analytical determination of stress intensity factor for plate bending problems. International Journal of Computational Engineering Sciences., 4 (1). pp. 109-119. ISSN 1465-8763
Chattopadhyay, Lalitha (2005) Analytical solution for an orthotropic elastic plate containing cracks13;. International Journal of Fracture, 134 (3-4). pp. 305-317.
Chattopadhyay, Lalitha (2007) Analytical solution for bending stress intensity factor in an orthotropic elastic plate containing a crack and subjected to concentrated moments. Archive of Applied Mechanics, 77 (1). pp. 49-62. ISSN 0939-1533
Chattopadhyay, Lalitha and Jain, PK (2012) Buckling load and post-buckling solution for mode shape of delaminated beam. International Journal of Engineering and Applied Sciences, 4 (2). pp. 59-66.
Chethana, D.M and Thanuja, T.C and Mahesh, H.M and Kiruba, M.S and Jose, A.S and Barshilia, H.C and Manjanna, J (2021) Structural, magnetic and NO2 gas sensing property of CuO nanoparticles. Ceramics International, 47 (7). pp. 10381-10387. ISSN 02728842
Chhangani, S and Masa, S.K and Mathew, R.T and Prasad, M.J.N.V and Sujata, M (2020) Microstructural evolution in Al–Mg–Sc alloy (AA5024): Effect of thermal treatment, compression deformation and friction stir welding. Materials Science and Engineering, 772. ISSN 09215093
Chikkangoudar, RN and Jarali, CS and Raja, S and Patil, SF (2020) Consistent derivation of non-constant material function for one-dimensional shape memory alloy phenomenological model. Materials Today: Proceedings. pp. 539-545. ISSN 2214-7853
Chopra, I and Durvasula, S (1971) Natural frequencies and modes of tapered skew plates. International Journal of Mechanical Sciences, 13. pp. 935-944. ISSN 0020-7403
Chowdhury, P and Kulkarni, PD and Krishnan, M and Barshilia, Harish C and Sagdeo, A and Rai, SK and Lodha, GS and Sridhara Rao, DV (2012) Effect of coherent to incoherent structural transition on magnetic anisotropy in Co/Pt multilayers. Journal of Applied Physics, 112 (2). 023912-1-023912-8. ISSN 0021-8979
Dash, PK and Iyengar, RN (1982) Analysis of Randomly Time Varying Systems By Gaussian Closure Technique. Journal of Sound and Vibration, 83 (2). pp. 241-251. ISSN 0022-460X
Deepika, MM and Onkar, AK (2021) Multicriteria optimization of variable thickness plates using adaptive weighted sum method. Sadhana- Academy Proceedings in Engineering Sciences, 46 (2). pp. 1-17. ISSN 02562499
Gopinath, L and Jerome, S and Gopalsamy, B (2022) Distinguishing process - Impact of down milling and up milling in machining aluminium thin wall. International Journal of Materials and Product Technology, 64 (2). pp. 156-174. ISSN 02681900
Gopinath, L and Jerome, S and Gopalsamy, B (2021) Mitigation of cutting point deviation by generating provisional corrugations during milling of thin walls. Machining Science and Technology, 25 (6). pp. 984-1009. ISSN 10910344
Gupta, Nitesh and Augustin, MJ and Sakthi Sathya, P S and Saransh, Jain and Viswamurthy , SR and Gaddikeri, KM and Ramesh, Sundaram (2013) Structural Health Monitoring of Composite Aircraft Structures Using Fiber Bragg Grating Sensors. Journal of the Indian Institute of Science, 93 (4). pp. 735-750. ISSN 0970-4140
Hussainy, SA and Hasseem, Mohamed H and Bhagawan, GK (1970) Stress distribution in the vicinity of slender notches having arbitrary shapes. Experimental Mechanics, 10 (1). pp. 46-48.
Iyer, RV and Sudhakar, A and Vijayan, Kalyani (2006) Decomposition behavior of kevlar 49 fibers: Part II. At T values lt; Td. High Performance Polymers, 18. pp. 495-517.
Jafarali, P and Chattopadhyay, Lalitha and Prathap, Gangan and Rajendran, S (2004) Error analysis of a hybrid beam element with Timoshenko stiffness and classical mass. International Journal of Computational Engineering Science, 5 (3). pp. 495-508.
Jain, Anjana and Vijayan, Kalyani (2004) Forbidden reflections from the aramid PPTA-A novel correlation13; with stacking faults. Bulletin of Material Science, 27 (1). pp. 47-50.
Jarali, Chetan S and Raja, S and Upadhya, AR (2010) Constitutive modeling of SMA SMP multifunctional high performance smart adaptive shape memory composite. Smart Materials and Structures, 19 (10). ISSN 0964-1726
Jarali, C.S and Chikkangoudar, R.N and Patil, S.F and Raja, S and Charles Lu, Y and Fish, J (2020) Derivation of compatibility conditions and nonconstant material function for one-dimensional constitutive relations of shape memory alloys. International Journal for Multiscale Computational Engineering, 18 (3). pp. 385-407. ISSN 15431649
Jayaraman, Chatterjee A and Ramaseshan, S and Singh, AK (1972) Pressure-induced electronic and structural transformation in some rare earth monochalcogenides. Acta Crystallographica, A28. S243-S243.
Jerald Maria Antony, G and Raja, S and Aruna, ST and Jarali, Chetan S (2020) Effect of the addition of diurethane dimethacrylate on the chemical and mechanical properties of tBA-PEGDMA acrylate based shape memory polymer network. Journal of the Mechanical Behavior of Biomedical Materials, 110. ISSN 17516161
Joshi, A and Madhusudhan, BS (1991) Sensitivity of free vibration charecteristices of cantilever plates to geometric parameters. Journal of Sound and Vibration, 145 (3). pp. 489-494.
Joshi, A and Somashekar, BR (1986) Effect of static inplane loads and boundary conditions on the flutter of flat rectangular panels. Journal of Aeronautical Society of India, 38. pp. 105-112.
Joshi, A and Suryanarayan, S (1989) Unified analytical solution for various boundary conditions for the coupled flexural-torsional vibration of beams subjected to axial loads and end moments. Journal of Sound and Vibration, 129. pp. 313-326. ISSN 0022-460X
Joshi, A and Upadhya, AR (1987) Modal couping effects in the free vibration of elastically interconnected beams. Journal of Sound and Vibration, 117 (1). pp. 115-130. ISSN 0022-460X
Kadam, M and Gopalsamy, B and Bujurke, AA and Joshi, KM (2018) Estimation of static burst pressure in unflawed high pressure cylinders using nonlinear FEA. Thin-Walled Structures, 126. pp. 79-84. ISSN 02638231
Kamath, GM and Sundaram, Ramesh and Gupta, Nitesh and Rao, Subba M (2010) Damage studies in composite structures for structural health monitoring using strain sensors. Structural Health Monitoring, 9 (6). pp. 497-512. ISSN 14759217
Kariappa, - and Somashekar, BR and Shah, CG (1970) Discrete element approach to flutter of skew panels with13; in-plane forces under yawed supersonic flow. AIAA Journal, 8 (11). pp. 2017-2022.
Kariappa, V and Somashekar, BR (1970) Flutter of skew panels by the matrix displacement approach. The Aeronautical Journal of the Royal Aeronautical Society, 74 (716). pp. 672-675.
Karthikeyan, K and Ramachandra, S and Vizhian, Paul S and Chandra, Satish (2011) Signal processing, wavelets and high-speed image interpretation of bird impact. Defence Science Journal, 61 (1). pp. 62-71. ISSN 0011-748X
Kidambi, R (2009) Viscous oscillations in a circular cylinder with an elastic cover on the free surface. Journal of Engineering Mathematics, 64 (3). pp. 269-284.
Kulkarni, PD and Sellarajan, Boominatha and Krishnan, M and Barshilia, Harish C and Chowdhury, P (2013) Anisotropic magnetic properties of bi-layered structure of ordered Co nanorod array: Micromagnetic simulation and experiments. Journal of Applied Physics, 114 (17). ISSN 0021-8979
Kumar, AS and Kumar, BR and Datta, GL and Ranganath, VR (2010) Effect of microstructure and grain size on the fracture toughness of a micro-alloyed steel. Materials Science and Engineering A, 527 (4-5). pp. 954-960. ISSN 0921-5093
Kumar, GV and Rao, KM and Kumar, JS and Raja, S (2011) Selective modal space control approach for smart composite cylindrical shell structure. ARPN Journal of Engineering and Applied Sciences, 6 (3). pp. 67-74. ISSN 1819-6608
Kumar, N and Deshpande, PJ and Dodamani, Ravi and Antony, R and Girish Prasad, M (2019) Interaction of two micro-propellers in coplanar and coaxial arrangement for UAV application. International Journal of Recent Technology and Engineering, 8 (2). pp. 5992-5995. ISSN 22773878
Kumar, S and Onkar, AK and Maligappa, M (2019) Frequency domain approach for probabilistic flutter analysis using stochastic finite elements. Meccanica, 54 (14). pp. 2207-2225. ISSN 00256455
Kumar, S and Onkar, AK and Manjuprasad, M (2020) Stochastic Modeling and Reliability Analysis of Wing Flutter. Journal of Aerospace Engineering, 33 (5). ISSN 08931321
Lakshminarayana, HV and Kailash, K (1989) A shear deformable curved shell element of quadrilateral shape. Computers and Structures, 33 (4). pp. 987-1001.
Lakshminarayana, HV and Murthy, MVV and Srinath, LS (1982) On an analytical-numerical procedure for the analysis of cylindrical shells with arbitrarily oriented cracks. International Journal of Fracture, 19. pp. 257-275. ISSN 0376-9429
Lakshminarayana, HV and Murthy, MVV and Srinath, LS (1981) On finite element model for the analysis of through cracks in laminated anisotropic cylindrical shells. Engineering Fracture Mechanics, 14 (4). pp. 697-712. ISSN 0013-7944
Malipatil, S G and Nagarajappa, N and Majila, AN and Chandru Fernando, D and Bojja, R and Jagannathan, N and Manjuprasad, M and Manjunatha, C M (2022) A study on the fatigue crack growth behaviour of GTM718 nickel based super alloy under cold-TURBISTAN spectrum loads. Theoretical and Applied Fracture Mechanics, 120. ISSN 01678442
Malwadkar, S and Bera, Parthasarathi and Hegde, MS and Satyanarayana, CVV (2012) Preferential oxidation of CO on Ni/CeO2 catalysts in the presence of excess H-2 and CO2. Reac Kinet Mech Cat, 107. pp. 405-419.
Mani, A and Pai, BC and Vijayan, Kalyani (1986) Comparison of the graphitizabilities of heat-treated coal tar and its mesophase pitches. Journal of Materials Science Letters, 5 (5). pp. 506-508. ISSN 0261-8028
Manikantan, R and Ghosh Mondal, T and Suriya Prakash, S and Vyasarayani, C.P (2020) Parameter identification of Bouc–Wen type hysteresis models using homotopy optimization. MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES. ISSN 15397734
Manju, S and Mukherjee, Somenath (2019) Function space formulation of the 3-noded distorted Timoshenko metric beam element. Structural Engineering and Mechanics, 69 (6). pp. 615-626. ISSN 12254568
Manjunatha, CM and Ramesh , Bojja and Jagannathan, N Fatigue Behavior of a Nanocomposite Under a Fighter Aircraft Spectrum Load Sequence. Journal of Nano Research, 24. pp. 58-66. ISSN 1661-9897
Manjunatha, CM and Ramesh , Bojja and Jagannathan, N and Kinloch, AJ and Taylor, AC (2013) Enhanced fatigue behavior of a glass fiber reinforced hybrid particles modified epoxy nanocomposite under WISPERX spectrum load sequence. International Journal of Fatigue, 54. pp. 25-31. ISSN 0142-1123
Marur, SR and Prathap, Gangan (2000) Consistency and correctness evaluation of shear deformable13; anisoparametric formulations. International Journal of Solids and Structures, 37 (5). pp. 701-713.
Masood, Nadeem and Kotresh, Gaddikeri M and Viswamurthy , SR (2015) Design of End Casting for Thin Composite Stiffened Panels Subjected to Axial Compression Load. JOURNAL OF AEROSPACE SCIENCES & TECHNOLOGIES, 67 (4). pp. 467-475. ISSN 0972-950x
Masood, Nadeem and Viswamurthy , SR and Kotresh, Gaddikeri M and Arun, Kumar Singh (2015) Buckling and Postbuckling of Cocured Composite Stiffened Panel Under Axial Compression Load - Computation and Testing. Journal of Aerospace Sciences and Technologies, 67 (2B). pp. 355-360. ISSN 0972-950X
Masood, SN and Viswamurthy, SR and Singh, AK and Muthukumar, M and Gaddikeri, KM (2018) Simulation and validation of disbond growth in co-cured composite skin–stringer specimens using cohesive elements. Journal of Composite Materials, 52 (6). pp. 807-822. ISSN 00219983
Mohan, Kumar M and Rajesh, S and Yogesh, H and Yeshaswini, BR (2013) Study on the effect of stress concentration on cutout orientation of plates with various cutouts and bluntness. International Journal of Modern Engineering Research, 3 (3). pp. 1295-1303. ISSN 2249-6645
Momin, N and Manjanna, J and Rane, K.S and Kumar, A and Senthilkumar, S and Aruna, ST (2021) Structural and ionic conductivity of Cu-doped titania (Ti0.95Cu0.05O2−δ) for high temperature energy devices. Ceramics International, 47 (7). pp. 10284-10290. ISSN 02728842
Mukherjee, Somenath and Manju, S (2011) An improved parametric formulation for the variationally correct distortion immune three-noded bar element. Structural Engineering and Mechanics. ISSN 1225-4568
Mukherjee, Somenath and Manju, S (2011) An improved parametric formulation for the variationlly correct distortion immune three-noded bar element. Structural Engineering and Mechanics, 38 (3). 000-000.
Mukherjee, Somenath and Prathap, Gangan (2001) Analysis of shear locking in Timoshenko beam elements using the function space approach. Communications in Numerical Methods in Engineering, 17 (6). pp. 385-393.
Mukherjee, Somenath and S, Manju (2011) An improved parametric formulation for the variationally correct distortion immune three-noded bar element. Structural Engineering and Mechanics, An International Journal, 38 (3). pp. 1-21.
Murthy, MVV and Prathap, Gangan (1996) Shear force predictions from RBF corrected QUAD4 elements. Communications in Numerical Methods in Engineering, 12 (2). pp. 135-140. ISSN 1552-485X
Murthy, MVV and Raju, KN and Viswanath, S (1981) On the bending stress distribution at the tip of a stationary crack from Reissner's theory. International Journal of Fracture, 17. pp. 537-539. ISSN 0376-9429
Murthy, MVV and Rao, KP and Rao, AK (1974) On the stress problem of large elliptical cutouts and cracks in circular cylindrical shells. International Journal of Solids and Structures, 10. pp. 1243-1269. ISSN 0020-7683
Murthy, SS and Gallagher, RH (1986) Triangular thin-shell finite element based on discrete kirchhoff theory. Computer Methods in Applied Mechanics and Engineering, 54 (2). pp. 197-222.
Naganarayana, BP and Prathap, Gangan (1990) Consistency aspects of out-of-plane bending, torsion and shear in a quadratic curved beam element. International Journal for Numerical Methods in Engineering, 30. pp. 431-443.
Naganarayana, BP and Prathap, Gangan (1989) Displacement and stress predictions from field- and line-consistent versions of the eight-node Mindlin plate element. Computers and Structures, 33 (4). pp. 1095-1106. ISSN 0045-7949
Naganarayana, BP and Prathap, Gangan (1992) Expert systems and finite element structural analysis - a review. Sadhana, 17 (2). pp. 275-298.
Naganarayana, BP and Prathap, Gangan (1989) Force and moment corrections for the warped four-node quadrilateral plane shell element. Computers and Structures, 33 (4). pp. 1107-1115. ISSN 0045-7949
Nandana, MS and Bhat, KU and Manjunatha, CM (2019) Improved fatigue crack growth resistance by retrogression and re-aging heat treatment in 7010 aluminum alloy. Fatigue and Fracture of Engineering Materials and Structures, 42 (3). pp. 719-731. ISSN 8756758X
Nandana, MS and Udaya Bhat, K and Manjunatha, CM (2018) Effect of Retrogression Heat Treatment Time on Microstructure and Mechanical Properties of AA7010. Journal of Materials Engineering and Performance, 27 (4). pp. 1628-1634. ISSN 10599495
Nandna, MS and Bhat, KU and Manjunatha, CM (2020) Damage Tolerance Capability of Retrogression and Re-aged 7010 Aluminum Alloy Under FALSTAFF Loading. Transactions of the Indian Institute of Metals, 73 (4). pp. 1073-1080. ISSN 09722815
Naragund, V.S and Panda, P.K (2020) Electrospinning of cellulose acetate nanofiber membrane using methyl ethyl ketone and N, N-Dimethylacetamide as solvents. Materials Chemistry and Physics, 240. ISSN 02540584
Naveen, V and Deshpande, AP and Raja, S (2020) Self-healing microcapsules encapsulated with carbon nanotubes for improved thermal and electrical properties. RSC Advances, 10 (55). pp. 33178-33188. ISSN 20462069
Naveen, V and Raja, S and Deshpande, Abhijit P (2019) A two-step approach for synthesis, characterization and analysis of dicyclopentadiene–urea formaldehyde–siloxane-based double-walled microcapsules used in self-healing composites. https://link.springer.com/article/10.1007/s12588-019-09247-2, 23 (2). pp. 157-169. ISSN 0972656X
Onkar, AK (2021) A successive robust flutter prediction technique for aeroelastic systems using µ method. Meccanica, 56 (10). pp. 2613-2629. ISSN 00256455
Panda, PK and Sahoo, B and Raja, S and Vijayakumar, MP and Shankar, V (2012) Electromechanical and dynamic characterization of in-house-fabricated amplified piezo actuator. Smart Materials Research, 2012.
Pandya , KS and Veera Sesha Kumar, C and Nair, NS and Patil, PS and Naik, NK (2014) Analytical and experimental studies on ballistic impact behavior of 2D woven fabric composites. International Journal of Damage Mechanics. pp. 1-41.
Pany, Chitaranjan and Parthan, S and Mukherjee, Somenath (2002) Vibration analysis of multi-supported curved panel using the periodic structure approach. International Journal of Mechanical Sciences, 44 (2). pp. 269-285.
Pavan Kumar, DVTG and Sathiya Naarayan, S and Kalyana Sundaram, S and Satish, Chandra (2012) Further numerical and experimental failure studies on single and multi-row riveted lap joints. Engineering Failure Analysis, 20. pp. 9-24. ISSN 1350-6307
Pavani , Udatha and Veera Sesha Kumar, C and Nithin, Nair and Naik, NK (2012) High Velocity Impact Performance of three-dimensional woven composites. The Journal of Strain Analysis for Engineering Design, 47 (7). pp. 419-431.
Poojary, Aithu and Rajagopalan, SR (1986) Use of phase-locked loop for generation of reference square waves for higher harmonic AC polarography. Indian Journal of Technology, 24 (8). pp. 501-504.
Prathap, Gangan (1985) Additional stiffness parameter measure of error of the second kind in the finite element method. International Journal for Numerical Methods in Engineering, 21 (6). pp. 1001-1012.
Prathap, Gangan (1996) Barlow points and gauss points and the aliasing and best fit paradigms. Computers amp; structures, 58 (2). pp. 321-325.
Prathap, Gangan (1985) Co Continuous four-noded cylindrical shell element. Computers and Structures, 21 (5). pp. 995-999.
Prathap, Gangan (1985) A Co continuous four-noded cylindrical shell element. Computers and Structures, 21 (5). pp. 995-999. ISSN 0045-7949
Prathap, Gangan (1985) Curved beam/deep arch/finite ring element revisited. International Journal for Numerical Methods in Engineering, 21 (3). pp. 389-407.
Prathap, Gangan (1986) Field-consistency - Toward a science of constrained multi-strain-field finite element formulations. Sadhana - Academy Proceedings in Engineering Sciences, 9 (4). pp. 319-343.
Prathap, Gangan (1997) Field-consistency approach to plate elements. Structural Engineering and Mechanics, 5 (6). pp. 853-865. ISSN 1225-4568
Prathap, Gangan (1979) On the Berger approximation - A critical re-examination. Journal of Sound and Vibration, 66. pp. 149-154.
Prathap, Gangan (1985) Poor bending response of the four-node plane stress quadrilateral. International Journal for Numerical Methods in Engineering, 21 (5). pp. 825-835.
Prathap, Gangan (1985) Simple plate/shell triangle. International Journal for Numerical Methods in Engineering, 21 (6). pp. 1149-1156. ISSN 0029-5981
Prathap, Gangan (1983) Two Frequency spectra of timoshenko beams. Journal of Sound and Vibration, 90 (3). pp. 443-446. ISSN 0022-460X
Prathap, Gangan (1993) Variational basis for Barlow points. Computers and Structures, 49 (2). pp. 381-383. ISSN 0045-7949
Prathap, Gangan (1996) Vibrations of laminated beams using higher-order theory. Advanced Composite Materials, 6 (1). pp. 33-50. ISSN 0924-3046
Prathap, Gangan (1985) An additional stiffness parameter measure of error of the second kind in the finite element method. International Journal for Numerical Methods in Engineering., 21. pp. 1001-1012.
Prathap, Gangan (1984) An optimally constrained 4 node quadrilateral thin plate bending element. Computers and Structures, 18 (5). pp. 789-794. ISSN 0045-7949
Prathap, Gangan (1999) A priori error estimation of finite element models from first principles. Sadhana, 24. pp. 199-214. ISSN 0256-2499
Prathap, Gangan and Bhashyam, GR (1982) Reduced integration and the shear-flexible beam element. International Journal for Numerical Methods in Engineering, 18. pp. 195-210. ISSN 0029-5981
Prathap, Gangan and Naganarayana, BP (1990) Analysis of locking and stress oscillations in a general curved beam element. International Journal for Numerical Methods in Engineering, 30 (1). pp. 177-200. ISSN 0029-5981
Prathap, Gangan and Naganarayana, BP (1992) Stress oscillations and spurious load mechanisms in variationally inconsistent assumed strain formulations. International Journal for Numerical Methods in Engineering, 33 (10). pp. 2181-2197. ISSN 0029-5981
Prathap, Gangan and Naganarayana, BP and Somashekar, BR (1988) Field-consistency analysis of the isoparametric eight-noded plate bending element. Computers and Structures, 29 (5). pp. 857-873. ISSN 0045-7949
Prathap, Gangan and Ramesh Babu, C (1987) Accurate force evaluation with a simple bi-linear, plate bending element. Computers and Structures, 25 (2). pp. 259-270. ISSN 0045-7949
Prathap, Gangan and Ramesh Babu, C (1986) Field consistent three-noded quadratic curved axisymmetric shell element. International Journal for Numerical Methods in Engineering, 23 (4). pp. 711-723.
Prathap, Gangan and Ramesh Babu, C (1987) Field-consistency and violent stress oscillations in the finite element method 13; 13;. International Journal for Numerical Methods in Engineering, 24. pp. 2017-2033.
Prathap, Gangan and Ramesh Babu, C (1986) Isoparametric quadratic thick curved beam element. International Journal for Numerical Methods in Engineering, 23 (9). pp. 1583-1600.
Prathap, Gangan and Ramesh Babu, C and Subramanian, G (1987) Stress oscillations in plane stress modelling of flexure - A field-consistency interpretation. International Journal for Numerical Methods in Engineering, 24 (4). pp. 711-724. ISSN 0029-5981
Prathap, Gangan and Vinayak, RU (1996) Best-fit stress performance of a higher-order beam element13;. Communications in Numerical Methods in Engineering, 12 (4). pp. 229-234. ISSN 0748-8025
Prathap, Gangan and Vinayak, RU and Naganarayana, BP (1996) Beam elements based on a higher order theory-II - Boundary layer sensitivity and stress oscillations. Computers amp; Structures, 58 (4). pp. 791-796.
Prathap, Gangan and Viswanath, S (1983) Optimally integrated four-node quadrilateral plate bending element. International Journal for Numerical Methods in Engineering, 19. pp. 831-840. ISSN 0029-5981
Prathap, Gangan and Manju, S and Senthilkumar, V (2007) Unsymmetric finite element formulation and variational incorrectness. Structural Engineering Mechanics, 26 (1). pp. 31-42.
Prathap, Gangan and Senthilkumar, V and Manju, S (2006) Mesh distortion immunity of finite elements and the best-fit paradigm,. Sadhana, 31 (1). pp. 505-514.
Premkumar, HB and Sunitha, DV and Nagabhushana, H and Sharma, SC and Nagabhushana, BM and Shivakumara, C and Rao, JL and Chakradhar, RPS (2012) Thermoluminescence, photoluminescence and EPR studies on Mn2+ activated yttrium aluminate (YAlO3) perovskite. Journal of Luminescence, 132 (9). pp. 2409-2415. ISSN 0022-2313
Raghu Prasad, BK and Pavan Kumar, DVTG (2009) Fracture Behavior of Multidirectional DCB Specimen:Higher-Order Beam Theories. Journal of Engineering Mechanics , 135 (10). pp. 1119-1128.
Raja, S and Rohwer, K and Rose, M (2004) Piezothermoelastic Modeling and Active Vibration Control of Laminated Composite Beams. DLR-Mitteilung. pp. 69-83. ISSN 1434-8462
Raja, S and Sinha, PK and Prathap, Gangan and Bhattacharya, Partha (2002) Influence of one and two dimensional piezoelectric actuation on active vibration control of smart panels. Aerospace Science and Technology, 6 (3). pp. 209-216. ISSN 1270-9638
Raja, S and Sinha, PK and Prathap, Gangan and Dwarakanathan, D (2006) Thermally induced vibration control of composite plates and shells with piezoelectric active damping. Smart Materials and Structures, 13 (4). pp. 939-950. ISSN 0964-1726
Rajendran, S and Prathap, Gangan (1999) Eight-node field-consistent hexahedron element in dynamic problems 13; 13;. Structural Engineering and Mechanics, 8 (1). pp. 19-26. ISSN 1225-4568
Ramesh Babu, C and Prathap, Gangan (1986) Field-consistent two-noded curved axisymmetric shell element. International Journal for Numerical Methods in Engineering, 23 (7). pp. 1245-1261. ISSN 0029-5981
Ramesh Babu, C and Subramanian, G and Prathap, Gangan (1987) Mechanics of field-consistency in finite element analysis - A penalty function approach. Computers and Structures, 25 (2). pp. 161-173. ISSN 0045-7949
Rao, MNB (1975) Thermal stresses around an elliptic hole in an infinite thick plate subjected to a uniform heat flow. Nuclear Engineering and Design, 35 (2). pp. 299-307. ISSN 0029-5493
Rao, MNB (1976) Thermal stresses around an insulated crack in an infinite plate subjected to a uniform heat flow. International Journal of Fracture, 12. pp. 777-779. ISSN 0376-9429
Rao, MNB and Guruswamy, P and Rao, MV and Pavithran, S (1977) Studies on vibration of some rib-stiffened cantilever plates. Journal of Sound and Vibration, 57. pp. 389-402. ISSN 0022-460X
Revanasidda, Benur and Akshatha, HT (2015) Design Evolution of a Typical Aircraft Engine Mount Bracket Using FE Based Optimisation Technique. International Journal of Mechanical Civil and Control Engineering, Vol. 1 (Issue.). pp. 7-11. ISSN 2394-8868
Sathianarayanan, A and Verma, SB (2017) Experimental investigation of an incident shock-induced interaction near an expansion corner. Journal of Spacecraft and Rockets, 54 (3). pp. 769-773. ISSN 00224650
Seetharam, SA and Dash, PK (1990) Analysis of short crack growth test data. Journal of Aeronautical Society of India, 42. pp. 43-50.
Seetharam, SA and Dash, PK (1991) Delta-K correlation of fatigue crack growth rates under general monotonic yielding. International Journal of Fracture, 52. R3-R8. ISSN 0376-9429
Seetharam, SA and Dash, PK (1992) Load-Cmod data analysis for crack closure. International Journal of Fracture, 53. R53-R58. ISSN 0376-9429
Senthilkumar, P and Dayananda, GN and Umapathy, M and Shankar, V (2012) Experimental Evaluation of a Shape Memory Alloy Wire Actuator with a Modulated Adaptive Controller For Position Control. Smart Materials and Structures, 21 (1). ISSN 0964-1726
Shah, CG and Krishnamurthy, AV (1991) Analysis of edge delaminations in laminates through combined use of quasi-three-dimensional, eight-noded, two-noded and transition elements. Computers and Structures, 39 (3-4). pp. 231-242.
Shaktivesh, S and Nair, NS and Sesha Kumar, ChV and Naik , NK (2013) Ballistic impact performance of composite targets. Materials and Design, 51. ISSN 0261-3069
Shashikala, Prakash and Krishna Mohan , Nutheti and Vinod , S Chippalakatti (2008) Design and development of high voltage high power operational amplifier using thick film technology. Sadhana, 33 (5). pp. 713-720. ISSN 0256-2499
Sinha, RP and Jarali, Chetan S and Raja, S (2011) Modelling the thermomechanical behaviour of shape memory polymer materials. Indian Journal of Engineering and Materials Sciences, 18. pp. 15-23. ISSN 0971-4588
Sivaranjani, T. and Abhirama, K. and Manjuprasad, M. (2018) Probabilistic fatigue life estimation of plate with multiple stress concentration zones}. Lecture Notes in Mechanical Engineering. pp. 307-322. ISSN 21954356
Somashekar, BR (1983) A simple selectively integrated torsion-flexure coupled tapered beam element with transverse shear deformation. Computers and Structures, 17 (3). pp. 403-406. ISSN 0045-7949
Somashekar, BR and Nanjunda Ram, CS (1984) Non-dimensional design data for cantilever swept plates. Institution of Engineers, 64. pp. 193-198.
Somashekar, BR and Krishnamurthy, AV and Ram, Nanjunda CS (1983) Study of swept cantilever wings employing inter-phase element concept for structural reduction. Aeronautical Society of India, Journal, 35. pp. 77-105. ISSN 0001-9267
Somashekar, BR and Prathap, Gangan (1983) Stress singularities in swept cantilever plates. Aeronautical Society of India, Journal, 35. pp. 107-111. ISSN 0001-9267
Somashekar, BR and Ram, Nanjunda CS (1984) Analysis of swept plates with structural reduction using transition element concept. Computers and Structures, 18 (3). pp. 409-416. ISSN 0045-7949
Somenath , Mukharjee and Prathap, Gangan (2001) Analysis of shear locking in Tomoshenko beam elements using the function space approach. Communications in Numerical Methods in Engineering (17). pp. 385-393. ISSN 1552-485X
Sreenivasan, NR (1978) The significance of axial stresses and out-of-plane restraints on the design of rotors. International Journal of Mechanical Sciences, 20 (5). pp. 265-276. ISSN 0020-7403
Subramanya, HY and Viswanath, S and Narasimhan, R (2007) Influence of crack tip constraint on void growth in pressure sensitive plastic solids-1: 2D analysis. Engineering Fracture Mechanics, 75. pp. 1045-1063.
Subramanya, HY and Viswanath, S and Narasimhan, R (2005) A three-dimensional numerical study of mixed mode (I and II) crack tip fields in elastic-plastic solids. International Journal of Fracture, 136 (1-4). pp. 167-185. ISSN 0376-9429
Sujata, M and Jagannathan, N and Raghavendra, K and Manjunatha, CM and Bhaumik, SK (2013) Fatigue Fracture of a Compressor Disc of an Aeroengine. Journal of Failure Analysis and Prevention. pp. 1-8.
Sundaram, R and Gupta, N and Rao, MS (2005) Structural health monitoring of co-cured composite structures using FBG sensors13;. Proceedings of the SPIE - The International Society for Optical Engineering, 5764 (1). pp. 559-570.
Sundaresan, MJ and Lakshminarayana, HV (1983) Stress concentration around circular cutouts in laminated composite cylindrical shells - Experimental investigation and finite element analysis. Aeronautical Society of India, Journal, 35. pp. 13-22. ISSN 0001-9267
Sundaresan, NJ (1984) The interaction of fracture and stresswaves in brittle material - An experiment to verify cleaving waves. International Journal of Fracture, 24. R19-R21. ISSN 0376-9429
Sunder, R (1991) Engineering analysis of notch root fatigue crack growth under spectrum loading. International Journal of Fatigue, 13 (3). pp. 249-262. ISSN 0142-1123
Sunder, R (1986) Fatigue crack propagation under spectrum loading. Journal of Aeronautical Society of India, 38 (3). pp. 153-160.
Sunder, R (1985) System for automated fatigue crack growth testing under random loading. International Journal of Fatigue, 7 (1). pp. 3-12.
Sunitha, DV and Manjunatha, C and Shilpa, CJ and Nagabhushana, H and Sharma, SC and Nagabhushana, BM and Dhananjaya, N and Shivakumara, C and Chakradhar, RPS (2012) CdSiO3:Pr3+ nanophosphor: Synthesis, characterization and thermoluminescence studies. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 99. pp. 279-287.
Swaminadham, M and Michael, Antony (1979) A note on frequencies of a beam with a heavy tip mass. Journal of Sound and Vibration, 66. pp. 144-147. ISSN 0022-460X
TADASHIGE , IKEDA, and TETSUHIKO , UEDA and Raja, SAMIKKANNU (2010) Deformation of a Beam with Partially Debonded Piezoelectric Actuators. Journal of Intelligent Material Systems and Structures. pp. 453-468.
Upadhya, AR and Aruna, HM (1986) Analysis of axisymmetric laminated composite shells subjected to asymmetric loading. Journal of Aeronautical Society of India, 38 (3). pp. 93-103.
Ushadevi, S and Singh, AK (1984) Pressure induced structural transformation in thulium monotelluride. Solid State Communications, 52 (3). pp. 303-305.
Verma, KK and Padmakara, G and Gaddikeri, KM and Ramesh, Sundaram and Kumar, S and Bose, S (2019) The key role of thread and needle selection towards ‘through-thickness reinforcement’ in tufted carbon fiber-epoxy laminates. Composites Part B: Engineering, 174. ISSN 13598368
Vinayak, RU and Prathap, Gangan and Naganarayana, BP (1996) Beam elements based on a higher order theory-I: Formulation and analysis of performance. Computers amp; Structures, 58 (4). pp. 775-789.
Vishwas, M and Rao , NK and Gowda , AKV and Chakradhar, RPS (2012) Influence of Sn doping on structural, optical and electrical properties of ZnO thin films prepared by cost effective sol-gel process. Spectrochim Acta A Mol Biomol Spectrosc, 95. pp. 423-426.
Viswamurthy , SR and Ajeesh, G and Pavan, Hiremath and Ashwin, Rai and Venkatesh, S and Kotresh, Gaddikeri M (2015) Damage Tolerance of Stiffened Skin Composite Panels. Journal of Aeospace Sciences and Technologies, 67 (2B). pp. 291-298. ISSN 0972-950x
Viswanath, S and Lakshminarayana, HV and Ravindranath, DD (1989) A modified crack closure integral method for calculating stress intensity factors for cracked plates subject to bending loads. International Journal of Fracture, Vol. 4. R45-R50. ISSN 0376-9429
Viswanath, S and Murthy, MVV and Krishnamurthy, AV and Rao, KP (1989) A special crack tip element for bending of plates with through cracks from a sixth-order plate theory. Engineering Fracture Mechanics, Vol. 3 (01). pp. 91-109. ISSN 0013-7944
Viswanath, S and Murthy, SS and Shah, CG (1980) Finite element analysis of some aerospace shell structures. Aeronautical Society of India, Journal, 32. pp. 109-115.
Viswanath, S and Prathap, Gangan (1983) A note on locking in a shear flexible triangular plate bending element. International Journal for Numerical Methods in Engineering, 19 (2). pp. 305-309. ISSN 0029-5981
Balasubramaniam, R and Somashekar, BR (1994) Ground vibration studies of aerospace structures- NAL's contribution. In: Aerodynamic Testing and Structural Dynamics. Interline Publishing Private Limited, Bangalore, pp. 1-15.
Banker, Manisha M and Varughese, Byji Analytical Prediction of Failure Strength of Co-cured Composite Skin-Stiffener Joints. In: 55th AIAA/ASME/ASCE/AHS/SC Structures, Structural Dynamics and Materials Conference 2014. American Institute for Aeronautics and Astronautics ( AIAA ), Proceedings of a meeting held 13-17 January 2014, National Harbor, Maryland, USA. Held at the AIAA SciTech Forum 2014. ISBN 978-1-63266-929-2
Banker, Manisha M and Dineshkumar, Harursampath and Narayana Naik, G (2012) Efficient Stiffened Composite Plate Analysis. In: 53rd AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference 2012. American Institute for Aeronautics and Astronautics ( AIAA ), Proceedings of a meeting held 23-26 April 2012, Honolulu, Hawaii, USA. ISBN 978-1-62276-068-8
Bhaumik, SK and Raja, S and Rajagopal, P (1994) Active flutter suppression of a cantilever plate at supersonic speeds. In: Aerodynamic Testing and Structural Dynamics. Interline Publishing Private Limited, Bangalore, pp. 1-16. ISBN 81-7296-040-9
Shantini, G and Pankaj, AC and Manjuprasad, M Flutter Reliability Studies of a Swept Back Plate. In: Recent Advances in Structural Engineering. Lecture Notes in Civil Engineering, 1 (11). Springer, Singapore, pp. 537-550. ISBN 978-981-13-0362-3
Somashekar, BR and Rajagopalan, SR and Ramamurthy, MR and Sundararajan, D (1994) Aeroelastic studies at National Aerospace Laboratory: a review. In: Aerodynamic Testing and Structural Dynamics. Interline Publishing Private Limited, B, pp. 1-19. ISBN 81-7296-040-9
Sreedhara, H and Dineshkumar, H and Ranganath, VR (2021) Experimental Evaluation of Laminated Carbon Composite Step Lap Repair Through Static and Fatigue Compression Loading. In: Fracture Failure Analysis of Fiber Reinforced Polymer Matrix Composites. Engineering Materials . Springer Science and Business Media B.V., Singapore, pp. 85-106.
Vyas, JJ and Gopalsamy, B and Joshi, H (2019) Electro-Hydraulic Actuation Systems Design, Testing, Identification and Validation. In: Electro-Hydraulic Actuation Systems. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, p. 63. ISBN 978-981-13-2547-2
Vyas, JJ and Gopalsamy, B and Joshi, H (2019) Introduction: Design, Testing, Identification and Validation. In: Electro-Hydraulic Actuation Systems. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 1-17.
Vyas, JJ and Gopalsamy, B and Joshi, H (2019) Mathematical modeling of flapper nozzle valve. In: Electro-Hydraulic Actuation Systems. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 19-37. ISBN 978-981-13-2547-2
Vyas, JJ and Gopalsamy, B and Joshi, H (2019) Results and discussion. In: Electro-Hydraulic Actuation Systems. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 53-61. ISBN 978-981-13-2547-2
Vyas, JJ and Gopalsamy, B and Joshi, H (2019) Servo valve characteristic curves. In: Electro-Hydraulic Actuation Systems. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 39-45. ISBN 978-981-13-2547-2
Vyas, JJ and Gopalsamy, B and Joshi, H (2019) System identification. In: Electro-Hydraulic Actuation Systems. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 47-51. ISBN 978-981-13-2547-2
Aeroelasticity Group, (1985) Aeroelastic Testing of ASLV Models for Predicting Transonic Buffet Response : Ground Studies. Project Report. National Aerospace Laboratories, Bangalore.
Aeroelasticity Group, (1985) Aeroelastic Testing of ASLV Models for Predicting Transonic Buffet Response: Model Design and fabrication. Project Report. National Aerospace Laboratories, Bangalore.
Anandan, K and Brahma, KK and Dash, PK and Raju, KN (1989) Evaluation of Fatigue and Fracture properties of Al-Li Alloys - Annual Report 1988-89. Project Report. National Aerospace Laboratories, Bangalore.
Anandan, K and Dash, PK (1991) Literature review microstructural aspects of fatigue and fracture behavior of aluminium lithium alloys. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Aravind, and Somenath, Mukharjee (2005) A Theoretical Formulation For Flutter Analysis Of A Typical Subsonic Aircraft Wing (SARAS) Using Quasi-steady Aerodynamic Theory. Project Report. National Aerospace Laboratories, Bangalore.
Balasubramaniam, R and Ramakrishna, DS and Saraswathi , Krishna (1985) Tuning of Mechanical Vibration Absorber for seaking Helicopter. Project Report. National Aerospace Laboratories, Bangalore.
Balasubramaniam, R and Ramakrishna, DS and Vijayakumar, PS (1985) Modal analysis of a typical fighter aircraft using transient testing technique. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Balasubramaniam, R and Shankar, V and Ramakrishna, DS and Nagaraja, SV (1988) Ground Resonance studies of HS 748 (unmodified ) Aircraft. Project Report. National Aerospace Laboratories, Bangalore.
Balasubramaniam, R and Siddappa, SV and Shankar, V and Saraswathi , Krishna and Ramakrishna, DS and Shashikala, Prakash (1987) Ground Resonance Test and Response analysis of HS 748 aircraft a Preliminary report. Project Report. National Aerospace Laboratories, Bangalore.
Balasubramaniam, R and Somashekar, BR (1985) Direct digital test system for vibration studies of aircraft structures. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Balasubramanian, TS (1988) Dynamic analysis of MiG-21 rudder (Metallic and composite). Project Report. National Aerospace Laboratories, Bangalore.
Balasubramanian, TS (1988) Dynamic strain monitoring of a EE pod during environmental tests. Project Report. National Aerospace Laboratories, Bangalore.
Balasubramanian, TS and Ramani, TS and Upadhya, AR and Elayathu, MNG (1985) Free Vibration Analysis of ASLV Aeroelastic Buffet Models. Project Report. National Aerospace Laboratories, Bangalore.
Balasubramanian, TS and Upadhya, AR (1985) Studies on the effects of flexibility in PSLV using aeroelastic models (A project proposal to VSSC, Trivandrum). Project Report. National Aerospace Laboratories, Bangalore.
Balasubramanian, TS and Vijaya Vittala, NG and Sudeendra, HN and Naidu, TM and Rajappa, Shashikala and Annamma Samuel, - (1985) Strain measurements on pressure vessels. Project Report. National Aerospace Laboratories, Bangalore.
Bapu Rao, MN (1985) Stress Analysis of a Missile wing subjected to Aerodynamic forces and heating. Project Report. National Aerospace Laboratories, Bangalore.
Bapu Rao, MN and Ashok Kamath, . and Kundavi Rani, . (1988) Stress Analysis of Prithvi Missil Wing Subjected to Aerodynamic Forces. Project Report. National Aerospace Laboratories, Bangalore.
Bapu Rao, MN and Dash, PK and Rani, DK (1997) Fatigue Analysis of an Aircraft Fin Lug. Project Report. National Aerospace Laboratories, Bangalore.
Bapu Rao, MN and Kamath, Ashok (1987) On the stress problem of the pebble bed heat exchanger in a hypersonic wind tunnel. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Bapu Rao, MN and Subramanya Sastry, SS and Dwarakanath, K and Jharia, Anoop and Rani, DK (1997) A report on the analysis of rear fitting assembly for LCA fin. Project Report. National Aerospace Laboratories, Bangalore.
Bhashyam, GR and Prathap, Gangan (1979) Galerkin finite element method for non-linear beam vibrations. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Brahma, KK (1990) Corrosion fatigue crack propagation in aluminium lithium alloys under spectrum loading. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Brahma, KK (1990) Load cell calibration of axial load fatigue testing machine. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Brahma, KK (1996) Seismic Qualification Testing of 300 AH RPC / H C P LM Cells on Steel Stand. Technical Report. National Aerospace Laboratories, Bangalore, India.
Brahma, KK (1999) Seismic Qualification Testing of Soft Starter Panel. Technical Report. National Aerospace Laboratories, Bangalore, India.
Brahma, KK (2001) Seismic qualification of Pneumatically Operated Directional Ball Valve Assembly and Fire Alaram Panel. Technical Report. National Aerospace Laboratories, Bangalore, India.
Dash, PK and Brahma, KK (1991) Random load sequence for full scale fatigue test of MiG-21M airframe. Project Report. National Aerospace Laboratories, Bangalore.
Dayananda, GN and Shankaranarayan, S (1991) Air circulation unit for the 3m Dia x 7m length autoclave -A computer aided design approach. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Devi, Bharathi B (1977) Maximization of system reliability by accelerated random search algorithm. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Dutta, Soma and Raja, S and Rajappa, Shashikala and Medar, MH Modelling and Analysis of MEMS Thermal Actuator. Project Report. National Aerospace Laboratories, Bangalore, India.
Farook, MA and Gopalan, R and Subba Rao, M and Ramanaiah, B and Prabhakaran Nair, O and Suseela, GR and Ramachandra, HV (1996) Structural static testing of LCA rudder. Project Report. National Aerospace Laboratories, Bangalore.
Ghoshal, S and Sunder, R (1989) Parametric analysis of fatigue under random loading. Technical Report. Structural Sciences Division, Bangalore, India.
Gopalan, R and Farook, MA (1994) Static testing of LCA co-cured fin (Preliminary report). Project Report. National Aerospace Laboratories, Bangalore.
Gopalan, R and Ramanaiah, B and Farook, MA and Ramachandra, HV and Sudheendra, HN and Suseela, GR (1990) Static testing of bridge deck plate prototypes. Project Report. National Aerospace Laboratories, Bangalore.
Gopalan, R and Ramesh Chandra, . (1987) Static Testing of Metallic Rudder of a Military Aircraft. Project Report. National Aerospace Laboratories, Bangalore.
Guruprasad, K and Aruna, HM (1985) Application of ASKA to a multirib box structure. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Himanshu, L Dave and Raja, S and Vijaya Kumar, MP (2009) Design and Development of Active Fasteners with PZT Stack Actuators for Vibration Control Applications. Project Report. NAL, Bangalore.
Ismail, Shaik and Chetty, Shyam and Raol, JR (1989) Longitudinal equivalent systems for augmented aircraft. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Jayanthi, BG (1989) Floating point hardware for the Flosolver. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Jayanthi, BG (1989) Multiactuator controller for full-scale fatigue test. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Jayasurya, M and Viswanathan, KS and Subba Rao, M (1990) Fabrication of GFRP bridge deck plate using soft tools. Project Report. National Aerospace Laboratories, Bangalore.
Joshi, A (1988) Free vibration analysis of HS0748 L Theoretical study and comparison with test results. Project Report. National Aerospace Laboratories, Bangalore.
Joshi, A and Madhusudhan, BS (1988) Free Vibration analysis of Rotodome - pylon assembly. Project Report. National Aerospace Laboratories, Bangalore.
Joshi, A and Madhusudhan, BS (1989) Free Vibration, Flutter and Gust Response Analysis of HS-748 Modified for AEW Role. Project Report. National Aerospace Laboratories, Bangalore.
Joshi, A and Madhusudhan, BS (1988) Free vibration analysis of Free vibration analysis of HS-748 integrated with pylone and deck plate. Project Report. National Aerospace Laboratories, Bangalore.
Joshi, A and Rajagopal, P (1985) Theoretical studies of wing divergence. Project Report. National Aerospace Laboratories, Bangalore.
Joshi, A and Ramamurthy, MR (1988) Aeroelastic testing of PSLV models. Project Report. National Aerospace Laboratories, Bangalore.
Joshi, A and Somashekar, BR (1988) Effect of initial curvature on the panel flutter. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Joshi, A and Somashekar, BR (1986) Effect of static inplane loads and boundary conditions on the flutter of flat rectangular panels. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Joshi, A and Upadhya, AR (1986) Transonic Buffet Testing of the PSLV Models - II: Modified Design & analysis. Project Report. National Aerospace Laboratories, Bangalore.
Joshi, A and Upadhya, AR (1986) Vibration of beams on intermediate elastic supports. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Joshi, A and Upadhya, AR and Balasubramanian, TS (1985) Transonic buffet testing of the PSLV models - I. Project Report. National Aerospace Laboratories, Bangalore.
Joshi, SC and Subba Rao, M and Murthy, MVV (1990) FEM analysis of GFRP single cell test beam and modified GFRP bridge deck. Project Report. National Aerospace Laboratories, Bangalore.
Kariappa, - and Somashekar, BR (1965) Application of matrix displacement methods in the study of panel flutter. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Kaul, Anup and Sunder, R and Venkatesh, CS (1989) 64 Channel Z80 microprocessor based strain gauge data13; acquisition system. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Madhava, MR and Sudheendra, HN (1985) Acoustic Emission Monitoring of Ammonia Transfer Main Weld Joints. Project Report. National Aerospace Laboratories, Bangalore.
Madhava, MR and Sudheendra, HN and Sridhara, S and Ramachandra, HV (1988) NON- Destructive Evaluation of Mig 21 composite Rudder. Project Report. National Aerospace Laboratories, Bangalore.
Madhava, MR and Sudheendra, HN and Sridhara, S and Ramachandra, HV (1989) Non Destructive Evaluation of MiG-21 Compsoite Rudder Part II - APT Section Adhesive bond qulality Evaluation. Project Report. National Aerospace Laboratories, Bangalore.
Madhava, MR and Upadhya, AR and Jayasurya, M (1985) Tests on Redux Bonded Sandwich Specimens. Project Report. National Aerospace Laboratories, Bangalore.
Madhusudhan, BS (1994) Buckling of simply supported laminated composite and sandwich panels including the effect of stringer stiffeners. Technical Report. National Aerospace Laboratories, Bangalore,India.
Madhusudhan, BS (1994) Buckling of simply supported laminated composite and sandwich panels including the effect of stringer stiffeners. Technical Report. National Aerospace Laboratories, Bangalore,India.
Manjuprasad, M and Sathish, B S and Viswanath, S (2007) Dynamic aeroelastic subsonic discrete gust response analysis of lifting surfaces in time domain using Newark's method. Technical Report. National Aerospace Laboratories, Bangalore, India.
Marimuthu, V and Raja, S and Viswanath, S and Rajesh, C (2004) Finite element formulation and analysis of laminated piezoelectric sandwich shells. Technical Report. National Aerospace Laboratories, Bangalore, India.
Mary, Shini Mole and Naganarayana, BP and Pratap, G (1994) FEM analysis of LTA-7 horizontal tail. Project Report. National Aerospace Laboratories, Bangalore.
Mukherjee, Somenath and Deepa, N and Avinash, R and Manjuprasad, M and Viswanath, S (2007) Analytical investigation of supersonic panel flutter under thermal environment with arbitrary flow direction. Technical Report. National Aerospace Laboratories, Bangalore, India.
Mukherjee, Somenath and Manjuprasad, M and Avinash, R and Sakravarthini, Deepa S (2007) Finite element studies on supersonic panel flutter under high thermal environment with arbitrary flow direction. Technical Report. National Aerospace Laboratories, Bangalore, India.
Mukherjee, Somenath and Prakash, B M Shashi and Alok, P Burgul and Viswanathan, S (2007) A method for dynamic characterization and response predication using ground vibration test(GVT) data for unknown structure. Technical Report. National Aerospace Laboratories, Bangalore, India.
Murthy, AV and Rama Krishna, K and James, Deepa (1994) Static analysis of LTA engine mount. Project Report. National Aerospace Laboratories, Bangalore.
Naganarayana, BP and Prasad, Vishnu T and Prathap, Gangan (1989) Implementation of Three-Noded Shear-Flexible Field-Consistent Isotropic/Anisotropic/Layered-Composite general curved beam with varying sectional rigidities in SAP-IV. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Naganarayana, BP and Prathap, Gangan (1988) Consistency aspects of out-of plane bending, torsion and shear in a quadratic curved beam element. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Naganarayana, BP and Prathap, Gangan (1988) Consistent force resultant distributions in a quadratic Cquot; beam element with varying sectional properties. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Naganarayana, BP and Prathap, Gangan and Ningaiah, - and Geetha, B and Manju, S (1993) FEM design and analysis of HAL - Autoclave. Project Report. National Aerospace Laboratories, Bangalore.
Naganarayana, BP and Virupaksha, SA and Prathap, Gangan (1993) Design and development of an expert advisor for general purpose finite element modeling of 2-dimensional structures. Technical Report. National Aerospace Laboratories, Bangalore, India.
Naik, Viveka and Sundeendra, HN and Madhava, MR and Manoharan, LC (1986) Development of an acoustic emission analyzer. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Parida, BK and Brahma, KK (1994) Residual Life Assessment of Ageing Aircraft - A Perspective. Technical Report. National Aerospace Laboratories, Bangalore, India.
Prabhu, ALM and Prakash, PJ and Thomas, SG and Vital, R and Sunder, R (1989) Subroutine package for menu driven data input. Technical Report. National Aeronautical laboratory, Bangalore, India.
Prakash, Raghu V and Mitchenko, EI (1994) A Study of Naturally Initiating Notch Root Fatigue Cracks Under Spectrum Loading. Technical Report. National Aerospace Laboratories, Bangalore, India.
Prakash, Raghu V and Parida, BK (1997) Fatigue Crack Growth Properties of Aluminium- Lithium Alloy 1441. Technical Report. National Aerospace Laboratories, Bangalore, India.
Prakash, Raghu V and Sunder, R (1991) Fatigue life under random load history derived from exceedance curves using different algorithms. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prakash, Raghu V and Sunder, R and Venkatesh, CS (1990) Cyclic stress-strain curve at a semi-circular notch. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prakash, Raghu V and Venkataswamy, MA and Krishnan, RV and Raju, KN (1997) Crack front mapping technique to understand behavior of fatigue cracks in lug joints. Technical Report. National Aerospace Laboratories, Bangalore, India.
Prathap, Gangan (1986) Field-consistency: Toward a science of constrained multi-strain-field finite element formulations. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan (1988) The variational basis for the least-squares field- redistribution of strainFunctions in the finite element formulation of constrained media elasticity. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Chandra, S (1987) Field consistency and flexure of the eight noded solid element. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Prathap, Gangan and Chandra, Satish and Srinidhi, Neela and Naganarayana, BP (1989) General purpose finite element shell in 'C'. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Naganarayana, BP (1990) A 3-D finite element package with expert system adaptive mesh control: Annual progress report. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Naganarayana, BP (1991) A 3-D finite element package with expert system and adaptive mesh control : User's demonstration manuals. Technical Report. National Aerospace Laboratories, Bangalore, India.
Prathap, Gangan and Naganarayana, BP (1991) A 3-D finite element package with expert system and adaptive mesh control program lists. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Naganarayana, BP (1991) A 3-D finite element package with expert system and adaptive mesh control: Concluding Report. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Naganarayana, BP (1988) Analysis of locking and stress oscillations in a general curved beam element. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Naganarayana, BP (1988) Consistency and orthogonality requirements and accurate stress recovery from the assumed strain eight noded quadrilateral plate bending element. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Prathap, Gangan and Naganarayana, BP (1988) Field-consistency rules for a three-moded shear flexible beam element under non-uniform isoparametric mapping. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Naganarayana, BP (1988) Field-consistency rules for a three-noded shear flexible beam element under non-uniform isoparametric mapping13;. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Naganarayana, BP and Sudhakar, B (1991) Development of general purpose finite element package for structural analysis of Isotropic, Anisotropic and Layered Composite Structures: Progress Report. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Ramesh Babu, C (1985) Accurate force evaluation with a simple bi-linear plate bending element. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Ramesh Babu, C (1985) Field-Consitent strain interpolations for the quadratic shear flexible beam element. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Prathap, Gangan and Ramesh Babu, C (1985) Field-consistency and violent stress oscillations in finite element method. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Ramesh Babu, C (1986) On the fiction of the kirchhoff effective shear reactions. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Ramesh Babu, C (1986) What are the true boundary conditions on the edge of a thin plate-poisson's or kirchhoff's? Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Ramesh Babu, C (1985) A field-consistent three-noded quadratic curved axisymmetric shell element. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Ramesh Babu, C (1985) An isoparametric quadratic thick curved beam element. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Ramesh Babu, C (1985) An isoparametric quadratic thick curved beam element. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Ramesh Babu, C and Somashekar, BR (1986) Single element test for aspect ratio sensitivity of solids - A field consistency error model. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Somashekar, BR (1987) Field and edge consistency synthesis of a 4-Noded quadrilateral plate bending element. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Somashekar, BR (1986) A field-consistent 8-noded laminated anisotropic plate element. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prathap, Gangan and Subramanian, G and Ramesh Babu, C (1985) Stress oscillations in plane stress modelling of flexure - A field- consistency interpretation. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Radhakrishna, BS and Lakshminarayana, HV (1986) Structural analysis of a Light Canard Research Aircraft using the ASKA system. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Radhakrishna, BS and Ramani, TS and Somashekar, BR (1987) Use of postprocessor femview to interactively view structural displacements. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Raja, S and Shashikala, Rajappa and Shankar, V and Janardhanam, S and Vijaya Vittala, NG and Vijayakumar, MP and Bhavana, Jadav (2009) Development of Active Engine Mount System using PZT Actuators for Low Speed Transport Aircraft. Documentation. NAL, Bangalore.
Rajagopal, P and Lakshminarayana, HV (1988) Application of Aeroelastic Tailoring in lifting surface design. Project Report. National Aerospace Laboratories, Bangalore.
Rajagopal, P and Ramamurthy, MR (1991) Unsteady airloads and aeroelastic studies of lifting surfaces in transonic flow. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Rajagopal, P and Vijaya Vittala, NG (1986) Determination of modal characteristics from random response signal. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Rajagopal, P and Vijaya Vittala, NG and Somashekar, BR (1988) Aeroelastic tailoring of unswept and forward swept advanced composite wings for divergence costraints. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Rajamohan, -- and Balasubramanian, TS (1975) Estimation of loads and moments on a fully articulated helicopter rotor blade. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Rajappa, N and Venkatarangan, P and Viswanathan, KS (1967) The Geomagnetic cavity and the Van Allen radiation belts-II. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Raju, K and Sunder, R (1985) Research and development in the field of fatigue and fracture mechanics at NAL. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Raju, KN (1993) Development of integrated database management and expert system for selection of materials to meet durability and damage tolerance requirements(completion Report). Project Report. National Aerospace Laboratories, Bangalore.
Ramakrishna, DS and Sathyanarayana, CN and Rajagopal, P and Rajesh, - and Saleem, Syad (1998) Ground vibration testing of HANSA - 3 proto II aircraft. Project Report. National Aerospace Laboratories, Bangalore.
Ramamurthy, MR and Rajagopal, P (1991) Application of Experimental and Theoretical Methods for Prediction of Aeroelastic Characteristics of Swept,13; Tapered and Delta Wings: PAECAST-1. Technical Report. National Aerospace Laboratories, Bangalore, India.
Ramani, TS and Vittala, NGV and Janardhanam, S and Upadhya, AR (1986) Feasibility study of a spring support system for buffet models and a mini shaker for model excitation. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Ramesh Babu, C and Prathap, Gangan (1985) A linear thick curved beam element. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Ramesh Babu, C and Somashekar, BR and Prathap, Gangan (1985) Development of a library of field-consistent finite elements. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Ramesh Babu, C and Subramanian, G and Prathap, Gangan (1985) Mechanics of field-consistency in finite element analysis - a penalty function approach. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Ramesh Chandra, . and Gopalan, R and Viswanathan, KS and Aruna, HM (1985) Radome development for Electronic Equipment Pod. Project Report. National Aerospace Laboratories, Bangalore.
Ramesh Chandra, . and Viswanathan, KS and Gopalan, R (1985) Structural Testing of Radomes '3' and '4' Electronic Equipment Pod, Technical Report Part XI. Project Report. National Aerospace Laboratories, Bangalore.
Rao, KVL and Sudha, R and Jagannatha Rao, B (1985) A Light Scattering Technique for the Measurement of SMD13; in Sprays. Technical Report. National Aerospace Laboratories, Bangalore, India.
Roshan, Antony and Veera Sesha Kumar, C and Antony, Michael and Jayaraman, M (2011) Structural Design Analysis of a 500 kW Wind Turbine. Project Report. National Aerospace Laboratories, National Aerospace Laboratories.
Samal, Girish P and Joshi, Yogesh and Brahma, KK (2001) Stress Analysis of Helicoptor Tail Rotor Blade Test Rig Under Simulated Load Condition Using Finite Element Method. Technical Report. National Aerospace Laboratories, Bangalore, India.
Sankar, N and Krishanan, A (1988) Data analysis package for X-ray diffractometer. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Sathyanarayana, CN and Ramakrishna Parsad, BH and Venkatasubramanyam, DV and Madhavan, Chinmayee and Viswanath, S (2004) Vibration Qualification Tests on Fatigue Meter. Project Report. National Aerospace Laboratories, Bangalore.
Satish, Chandra and Dhayanidhi , J and Karthikeyan, M (2002) Knowledge based engineering for structural design of aerospace components. Project Report. National Aerospace Laboratories, Bangalore.
Satyanarayana, CN and Shivaprasad, MV and Shivaprasad, S and Jayaraman, M and Veera Sesha Kumar, C and Venkatasubramanyam, DV (2009) Ground Resonance Testing of 500 kW Wind Turbine GFRP Blade. Project Report. National Aerospace Laboratories, National Aerospace Laboratories.
Seetharam, SA (1990) Investigation of short crack behaviour in aluminium alloys. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Shah, CG and Nagesh, KS (1989) Static Analysis of Rotodomed Aircraft Using ASKA - Vertical Gust Load Case (Vg). Project Report. National Aerospace Laboratories, Bangalore.
Shaik, Imran (2005) Design and Implementation of Flapping Wing Actuators for a Micro-Air-Vehicle. Technical Report. National Aerospace Laboratories, Bangalore, India.
Shashikala, Prakash and Venkatasubramanyam, DV and Kiran, PVR Sai and Aravind, Pavate and Hemant, Kabra and Om, Prakash Alone and Bharath, Krishnan (2009) High Performance Compact FPGA Controller for Active Vibration Control of Aerospace Structures - Technical Report. Project Report. NAL, Bangalore.
Singh, Akansha and Viswamurthy , SR (2011) Interlaminar Fracture Toughness Characterization of Unidirectional Carbon Fiber Reinforced Epoxy Composites. Project Report. CSIR-NAL, Bangalore.
Singh, JP (1989) Multigrid accelerated relaxation solution of transonic full potential flow equation. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Somashekar, BR and Prathap, Gangan (1986) A Field-consistency error model for the single element test for the eight noded brick element. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Somashekar, BR and Prathap, Gangan and Ramesh Babu, C (1985) ASKA and constrained multi-strain-field problems. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Somashekar, BR and Prathap, Gangan and Ramesh Babu, C (1985) A field-consistent 4-Noded laminated anisotropic plate/shell element. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Somashekar, BR and Rama Murthy, MR and Rajagopal, P and Sundararajan, D and Shashikala, Rajappa and Annamma Samuel, - and Janardhanam, S (1997) Aeroelastic testing of LCA wing models - Model fabrication - Ground testing - Wind tunnel testing and Data analysis. Project Report. National Aerospace Laboratories, Bangalore.
Sridhara, S and Nagesh, KS (1988) TRlELE: A finite element software for the analysis of laminated composite plates and shells. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Sridhara Murthy, S (1988) Static Analysis of rotodomed aircraft Part I Nastran Substructure Modelling. Project Report. National Aerospace Laboratories, Bangalore.
Sridhara Murthy, S and Jayatheertha, C and Viswanath, S and Gopalaksrishnan, . and Murthy, MVV (1989) Static Analysis of rotodomed Aircraft Part II: Result. Project Report. National Aerospace Laboratories, Bangalore.
Sridhara Murthy, S and Venkatasubramanyam, DV and Ningaiah, K and Subramanya, HY and Subramanya Sastry, SS and Kamath, Ashok (1990) 1:4.405 scale LCA High speed air-intake model: Revised analysis and design. Project Report. National Aerospace Laboratories, Bangalore.
Sridhara Murthy, S and Viswanath, S and Gangan, Prathap (1988) Static Analysis of Rotodomed aircraft Part II: Results for vertical gust load case (vB1). Project Report. National Aerospace Laboratories, Bangalore.
Srivastava, KG and Hursha, S and Raviprasad, BP and Vijayasarathi, HN and Brahma, KK and Upadhya, Sarala (1989) Fatigue crack growth and fracture toughness behaviour of aluminium lithium alloys. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Stanley , C Salem and Kowshik , BS and Gowda, MNN and Kotresh, Gaddikeri M and Ramesh, Sundaram and Devaiah, MC and Ramachandra, HV Evaluation of Fastener Pull Through Resistance of Aluminum. Technical Report. NAL Press.
Stanley , C Salem and Sugun, BS and Sandeep Kumar, V and Viswamurthy , SR and Ramesh, Sundaram Low Velocity Impact Characterisation of Carbon/Epoxy Laminates processed through Resin Infusion Technique. Technical Report. NAL Press.
Structural Sciences Division, (1987) Development of fabrication facility for braid composite: structures. Project Report. National Aerospace Laboratories, Bangalore.
Structural Sciences Division, (1988) Dynamic analysisof HS 748 Modified for AEW Role a Proposal. Project Report. National Aerospace Laboratories, Bangalore.
Structural Sciences Division, Evaluation of Fatigue and Fracture Properties of Aluminium Lithium Alloys - Closure Report. Project Report. National Aerospace Laboratories, Bangalore.
Subba Rao, M and Dayananda, GN (1995) Design Features of Autoclave Sub-Systems. Technical Report. National Aerospace Laboratories, Bangalore, India.
Subba Rao, M and Jharia, Anoop (1996) Finite Element Analysis of Radome for Mirage (ABD) 2000. Project Report. National Aerospace Laboratories, Bangalore.
Subba Rao, M and Ramesh Chandra, . (1986) Preliminary Design of Composite Rudder for MiG-21 Aircraft Part II. Project Report. National Aerospace Laboratories, Bangalore.
Sudheendra, HN and Madhava, MR (1992) An ultrasonic c-scan system for the NDE of advanced composites. Project Report. National Aerospace Laboratories, Bangalore.
Sundaresan, MJ (1983) Acoustic emmision measurement through an improved count technique. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Sundaresan, MJ and Lakshminarayana, HV (1979) Stress concentration around circular cutouts in13; laminated composite cylindrical shells: Finite element13; analysis and experimental investigation. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Sundaresan, MJ and Sudheendra, HN and Ramachandra, HV and Uppin, Shekarappa S and Ningaiah, - and Venkatasubramanyam, DV and Sastry, HSP (1982) Structural testing of filament wound fibre reinforced plastic pressure vessels. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Sunder, R (1989) Engineering analysis of notch root fatigue crack growth under spectrum loading. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Sunder, R (1985) Fatigue crack propagation under spectrum loading. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Sunder, R (1989) Indo-Soviet joint research on fatigue and fracture: Report on visit to USSR under ILTP programme. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Sunder, R (1991) Rainflow Applications in Accelerated Cumulative13; Fatigue Analysis. Technical Report. National Aerospace Laboratories, Bangalore, India.
Sunder, R and Venkatesh, CS (1989) Dedicated microprocessor based controller for fatigue testing. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Sunder, R and Venkatesh, CS (1992) Microprocessor based controller for actuators in structural testing. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Suresh, KS and Balasubramanian, TS (1993) Design Data Generation of Foam and Wood for NALLA 2. Project Report. National Aerospace Laboratories, Bangalore.
Upadhya, AR and Joshi, A (1985) Experimental flutter testing of Prithvi models. Project Report. National Aerospace Laboratories, Bangalore.
Upadhya, AR and Ramamurthy, MR and Sundararajan, D (1986) Wind tunnel data reduction techniques for aeroelastic models. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Veena, KR and Sunder, R (1990) Real time software for structural testing. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Venkatesh, CS (1990) Development of controllers for component fatigue testing facility for use in future Ramp;D programme. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Venkatesh, CS and Ramesha, G and Raghavan, SG and Ramesh, HP (1990) Z 80 based multi-channel peak detector. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Vepa, Ranjan (1979) Calculation of the floquet transition matrix with application to lifting rotor and other dynamic stability problems. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Vijaya Vittala, NG and Barai, Amalesh and Kamesh, JV and Viswanath, S and Somashekar, BR (1994) Flutter Characteristics of HANSA2 (NALLA 2C). Technical Report. National Aerospace Laboratories, Bangalore, India.
Vijaya Vittala, NG and Rajagopal, P and Madhusudhan, BS (1990) Analysis of a Cantilivered Cylindrical Squeeze Film Damper. Project Report. National Aerospace Laboratories, Bangalore.
Viswamurthy, SR and Siva, M and Ramachandra, HV (2013) Interlaminar Fracture Toughness Characterization of Unidirectional Glass Fiber Composite (S2/913 prepreg). Technical Report. CSIR-NAL, CSIR-NAL, Bangalore.
Viswamurthy , SR and Siva, M and Ramachandra, HV and Stanley , C Salem (2013) Interlaminar Fracture Toughness Characterization of Unidirectional Carbon Fiber Composite (AS4/914 prepreg). Technical Report. CSIR-NAL, CSIR-NAL, Bangalore.
Viswamurthy , SR and Stanley , C Salem and Kotresh, Gaddikeri M and Ramesh, Sundaram (2012) Damage Characteristics & Residual Compression Strength of CFRP Laminates manufactured using VERITy Subjected to Low Velocity Impact. Technical Report. CSIR-NAL, Bangalore.
Viswanath, S (1985) An Overview of General Purpose Program Packages at NAL. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Viswanathan, KS and Jayasurya, M and Subba Rao, M (1988) Fabrication of Composite parts of composite rudder for a typical military aircraft. Project Report. National Aerospace Laboratories, Bangalore.
Aghilesh, V and Manigandan, P and Reddy, S and Raja sekar, K and Shunmugavelu, N (2020) Design and Analysis of an Agriculture Solar Panel Support Structure with Tilting Mechanisms. In: Lecture Notes in Mechanical Engineering.
Anandan, C and Mohan, L and Viswanathan, S (2015) Corrosion behaviour and effect of surface finishing in the formation of nano structure on NiTi Alloy. In: NSEST 2015, 24.07.2015, IISc,Bengaluru.
Anandan, C and Mohan, L and Viswanathan, S (2015) : Electrochemical behaviour of Oxygen Plasma ion implanted NiTi alloy for Biomedical Applications. In: NSEST 2015, 24.07.2015, IISc,Bengaluru.
Aparna, BR and Satyanarayana, CN and Raja, S (2022) Maximum Amplitude Spectra of Propagating Guided Waves in Thin Isotropic Structure Employing Circular and Rectangular PZT Array Sensors for Structural Health Monitoring Applications. In: MysuruCon 2022 - 2022 IEEE 2nd Mysore Sub Section International Conference, 16-17 October 2022, Mysuru, India.
Aparna, BR and Satyanarayana, CN and Raja, S (2022) Multi-Class Classification of Lamb-Wave Based Sensor De-bond Identification Using Artificial Neural Network For Structural Health Monitoring. In: MysuruCon 2022 - 2022 IEEE 2nd Mysore Sub Section International Conference, 16-17 October 2022, Mysuru, India.
Arun Kumar, A and Onkar, AK (2021) Frequency Domain Based Robust Flutter Analysis of Swept Back Wing Using μ Method. In: Recent Advances in Computational Mechanics and Simulations, Singapore.
Aruna, HM and Guruprasad, K and Somashekar, BR (1985) Finite element modelling and analysis of a composite rudder. In: Conference on Finite Elements in Computational Mechanics, 2-6 Dec 1985, Bombay, India.
Augustin, MJ and Sakthi Sathya, P S and Viswamurthy , SR and Nitesh, Gupta and Ramesh, Sundaram (2013) Sensor sensitivity studies towards development of impact event detection system for composite laminates and metallic plates. In: ISSS National Conference on MEMS, Smart Materials, Structures and Systems, 2013-09-06, Pune, India.
Balaraju, JN and Sujata, M and Manju, C (2015) Effect of chemical treatment on the corrosion and bioactivity of equiatomic NiTi alloy. In: NSEST 2015, 24.07.2015, IISc,Bengaluru.
Bapu Rao, MN Three-dimensional stress problem of a finite thick plate with a through crack under tension. In: 6th International Conference on Fracture (ICF6)., 4-10 Dec 1984, New Delhi, India.
Basu, Bharathibai J and Anandan, C and Rajam, KS (2004) Application of luminescent coatings for surface pressure measurements. In: International Conference on Advances in Surface Treatment: Research and Applications, ASTRA,, Nov 3-6 2003, Hyderabad, India.
Chandra, R and Sunder, R Fatigue crack growth in patched plates under constant amplitude and flight simulation loadings. In: 6th International Conference on Fracture (ICF6)., 4-10 Dec 1984, New Delhi.
Chandra, S (1999) Feature description structures for finite element modelling. In: International Conf. on Civil and Structural Engineering, 7th, and International Conf. on the Applications of AI to Civil and Structural Engineering, 13-15 Sept 1999, Oxford, UK.
Chandra, Satish (2007) Market Forecasts and Cost Economics Structures For the Management of Civil Aircraft Operations in India. In: Symposium on Aircraft Design, 14th June 2007, Bangalore, India.
Chotalia, RJ and Alone, DB (2017) Numerical investigations on influence of uniform blade surface roughness on the performance characteristics of a transonic axial flow compressor stage. In: ASME 2017 Gas Turbine India Conference, GTINDIA 2017, 7 - 8 December 2017, Bangalore, India.
Ezhil Selvi, V and Balaraju, JN and Ramesh, K (2015) Electroless ternary Ni-Co-P and quaternary Ni-W-Co-P coatings: Preparation and characterization. In: Int. Conf. on Advances in Materials, Manfacturing and Applications (AMMA-2015), 04-09-2015, NIT Tiruchirappalli.
Guruprasad, K and Subba Rao, M and Chandra, Ramesh (1988) Finite element analysis of composite rudder for DO 228 Aircraft 13; 13;. In: Composite Materials and Structures, 6-9 Jan 1988, Madras, India.
Hagaragi, M and Mohan Kumar, M and Sharma, RS (2020) Estimation of Residual Life and Failure Mechanism of Cracked Aircraft Wing Skin. In: Fatigue, Durability, and Fracture Mechanics, Singapore.
Jain, Saransh and Viswamurthy , SR and Gupta, Nitesh (2012) Debond Detection and Load Estimation Using Fiber Bragg Grating Sensors on a Composite Test Box – Part II (Algorithm Development). In: International Conference on Smart Materials Structures and Systems, 4-7 January 2012, Indian Institute of Science, Bangalore.
James, P and Gaddikeri, KM and Varughese, Byji and Subba Rao , M (2014) Realisation of Shear Flow at Crucial Spar Splice Joints of Composite Wing in Idealised Wing Test Box. In: ICONS-2014: International Conference on Structural Integrity, 04 Feb 2014, IG CAR: Indira Gandhi Centre for Atomic Research, Kalpakkam, Tamilnadu, India.
Janardhanam, S and Dutta, Soma and Rajappa, Shashikala and Sundararajan, D and Raja, S (2004) Characterization of piezoelectric stack actuators for structural control applications. In: 3rd International Conference on Theoretical, Applied, Computational and Experimental Mechanics – ICTACEM 2004 , December 2004, IIT, Kharagpur, India.
Kadam, M and Murugan, GB and Bujurke, AA and Joshi, KM (2017) Finite Element Prediction of Static Burst Pressure in Closed Thick- walled Unflawed Cylinders of Different Diameter Ratios. In: Procedia Engineering.
Kamalakannan, GM and Subba Rao, M and Chandra, K and Abhilash, P (2008) Advanced hot bonding system for repair of Aerospace Structures. In: Proceedings of the INCCOM-7, Dec. 4-5, 2008, Bangalore, India.
Kamath, GM and Kumar, Senthil P and Shivaprasad, MV (2002) Vibration control studies using an impedance method. In: Conference on Smart Materials, Structures, and Systems, 12-14 Dec 2002, Bangalore, India.
Kumar, D Nagendra and Raja, S and Yadav, D (2005) Active vibration control of composite plate with partially13; debonded piezoelectric actuators. In: International Conference on Smart Materials Structures and Systems, 28-30 Jul 2005, Bangalore, India.
Kumar, A and Manoj, N and Onkar, AK and Manjuprasad, M (2016) Fluid-Structure Interaction Analysis of a Cropped Delta Wing. In: Procedia Engineering}.
Kumar, AA and Onkar, AK (2021) Robust Flutter Prediction of an Airfoil Including Uncertainties. In: Design and Development of Aerospace Vehicles and Propulsion Systems, 15 June 2021, Singapore.
Kumar, GG and Sivaranjani, T and Pavan Kumar, DVTG and Mahesh Kumar, CL (2021) Fatigue crack growth analysis using surrogate modelling techniques for structural problems. In: Recent Trends in Civil Engineering, Singapore.
Kumar, S and Onkar, AK and Manjuprasad, M (2022) Flutter Reliability Analysis of an Aircraft Wing: A Comparative Study. In: Lecture Notes in Mechanical Engineering,.
Kumar, S and Onkar, AK and Manjuprasad, M (2021) Probabilistic Flutter Analysis of a Cantilever Wing. In: Advances in Structural Vibration, Singapore.
Lakshmi, RV and Balaji, N and Aruna, ST and Shilpa, M (2015) In-vitro corrosion studies of plasma sprayed hydroxyapatite coatings fabricated from coprecipitation synthesized powder. In: NSEST 2015, 24.07.2015, IISc,Bengaluru.
Lakshminarayana, HV (1984) Study of interlaminar fracture in unidirectional composite materials. In: Analysis of Structures - A Commemorative volume published on the occasion of the 60th Anniversary of Dr. S.R.Valluri, Dec 1984, NAL, Bangalore, India.
Lakshminarayana, HV and Ramani, TS (1988) On improving the performance of a shear-flexible triangular laminated composite plate finite element. In: Proceedings of the International Conference on Composite materials and structures, 6-9 Jan 1988, Madras, India.
Lakshminarayana, HV and Ramesh Babu, C (1985) Finite Element Applications in Mechanics of Composites. In: Finite Elements in Computational Mechanics., 2-6 Dec 1985, Bombay; India.
Lakshminarayana, HV and Viswanath, S (1976) Influence of material orthotropy on the state of stress around a circular hole in a cylindrical shell. In: ASME 1976, 5-10 Dec 1976, New York, USA.
Mahesh, M and Krishnapillai, S and Ashwin, U and Satyanarayana, CN and Raja, S (2022) A Novel PZT Sensor Bonding Technique For Structural Health Monitoring Application. In: MysuruCon 2022 - 2022 IEEE 2nd Mysore Sub Section International Conference, 16-17 October 2022, Mysuru, India.
Malipatil, SG and Chandru Fernando, AN and Manjunatha, CM (2021) Correlating Stress Ratio Effects on the Fatigue Crack Growth Rate of a Nickel Base Superalloy IN718. In: Fatigue, Durability, and Fracture Mechanics, Singapore.
Malipatil, SG and Majila, AN and Fernando, CD and Manjunatha, CM (2020) Fatigue Crack Growth Behavior of a Nickel-Base Super Alloy Inconel 718 Under Spectrum Loads. In: Lecture Notes in Mechanical Engineering.
Manjunatha, CM and Parida, BK (2003) A model for predicting the overload effects on fatigue crack growth behavior. In: 44th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics, and Materials Conference, 7-10 Apr 2003.
Manjunatha, C and Vinod Kumar, K and Kiran, M and Rammohan, B (2022) Kinematic and Dynamic Analysis of Primary FCS Circuits of Typical 25 Seater Transport Aircraft. In: Lecture Notes in Mechanical Engineering: Machines, Mechanism and Robotics.
Manjuprasad, M and Manohar, CS (2006) Stochastic finite element reliability analysis of plates/shells under dynamic excitations with adaptive mesh refinements. In: International Conference on Trends in Product Life Cycle-Modeling, Simulation and Synthesis (PLMSS-06), 18-20 Dec 2006, Bangalore, India.
Masood, Nadeem and Viswamurthy , SR and Gaddikeri, KM (2014) Interface Toughness Measurements in Blade Stiffened Composite Skin Specimens. In: 18th NASAS (Eighteenth National Seminar on Aerospace Structures), 15-17 December 2014, VNIT Nagpur.
Masood, Nadeem and Viswamurthy , SR and Gaddikeri, KM and Arun, Kumar Singh (2014) Buckling & postbuckling of cocured composite stiffened panel under axial compression load- Computation & Testing. In: 18th NASAS (Eighteenth National Seminar on Aerospace Structures), 15-17 December 2014, VNIT Nagpur.
Masood, Nadeem (2016) Simulation & validation of delamination growth in CFRP specimens under mixed mode loading using cohesive elements. In: Proceedings of 14th ISAMPE National Conference on Composites (INCCOM-14), Hyderabad, January 22-23, 2016, Hyderabad, India.
Mohan, Kumar M (2010) Residual strength evaluation of a transport aircraft fuselage stiffened panel. In: Proceedings of International Conference on Frontiers in Mechanical Engineering , , 20-22 May 2010, NITK,Surathkal, Mangalore, Karnataka, INDIA.
Mohan, Kumar M and Jagannathan, N and Jeeva, Peter M and Ravi, Kumar S (2010) Hygrothermal effects on the mechanical properties of glass fibre-epoxy composite material. In: Proceedings of Second International Conference on Polymer Processing and Characterization , 15-17 Jan 2010, Kottayam, Kerala.
Murthy, HS (1984) Analysis of unsteady pressure measurements on a supercritical airfoil with a harmonically oscillating trailing edge flap at subsonic and transonic speeds. In: Forschungsbericht - Deutsche Forschungs- und Versuchsanstalt fur Luft-, 1984, Germany.
Murthy, Sridhara S (2007) Elasto-Plastic Stress Analysis of a High Stress Region Of Saras Aircraft Wing. In: Symposium on Aircraft Design, 14th June 2007, Bangalore, India.
Murthy, Sridhara S (1984) Triangular thin shell finite element for laminated general shells. In: Analysis of Structures - A Commemorative volume published on the occasion of the 60th Anniversary of Dr. S.R.Valluri, Dec 1984, NAL, Bangalore, India.
Murthy, Sridhara S and Gallagher, RH (1985) A triangular thin shell element based on discrete Kirchhoff theory - Some patch test solution results. In: Conference on Finite elements in computational mechanics, 2-6 Dec 1985, Bombay, India.
Naik, NK and Veera Sesha Kumar, C Ballistic impact behavior of foam core sandwich structures: Formulation. In: International Conference on Composites - Current and Future Trends, Indian Institute of Science.
Nandakumar, T and Manjuprasad, M and Vishnuram, BG (2006) Nonlinear pushover analysis of a framed structure with base isolation system. In: National Conference on Frontline Aeras of Engineering (NCFACE-2006), 28-29 Apr 2006, Coimbatore, Tamil Nadu, India.
Nandana, MS and Udaya, BK and Manjunatha, CM (2020) Effect of Microstructure on the Fatigue Crack Growth Behavior in Al–Zn–Mg–Cu Alloy. In: Lecture Notes in Mechanical Engineering.
Nandana, MS and Udaya, BK and Manjunatha, CM (2020) Influence of heat treatment on near-threshold fatigue crack growth behavior of high strength aluminum alloy 7010. In: Lecture Notes in Mechanical Engineering.
Nandana, MS and Udaya Bhat, K and Manjunatha, CM (2019) Influence of retrogression and re-ageing heat treatment on the fatigue crack growth behavior of 7010 aluminum alloy. In: 2nd International Conference on Structural Integrity and Exhibition 2018.
Narayana, HVL and Rajagopal, P and Namani, TS and Ramamurthy, MR (1988) Vibration and flutter analysis of composite wing panels. In: Composite materials and structures; Proceedings of the International Conference, 6-9 Jan. 1988, Madras, India.
Prakash, Raghu V and Sunder, R and Mitchenko, EI (1996) Study of naturally initiating notch root fatigue cracks under spectrum loading. In: Proceedings of the 3rd Symposium on Advances in Fatigue Lifetime Predictive Techniques, 16-17 May 1994, Montreal, Canada.
Prakash, Shashikala and Balasubramaniam, R and Praseetha, KK (2002) Simulation studies for multichannel active vibration control. In: Conference on Smart Materials, Structures, and Systems, 12-14 Dec 2002, Bangalore, India.
Prathap, Gangan (1984) Field consistency and the finite element analysis of multi-field structural problems. In: Analysis of Structures - A Commemorative volume published on the occasion of the 60th Anniversary of Dr. S.R. Valluri, Dec 1984, NAL, Bangalore, India.
Prathap, Gangan (1985) A simple plate/shell triangle. In: International Journal for Numerical Methods in Engineering, June 1985, United Kingdom.
Prathap, Gangan and Ramesh Babu, C (1986) Accurate shear force evaluation with a simple bi-linear plate bending element. In: International Symposium on Composite Materials and Structures, 10-13 Jun 1986, Beijing, China.
Prathap, Gangan and Somashekar, BR (1988) A field-consistent 8-noded laminated anisotropic plate element. In: Proceedings of the International Conference on Composite materials and structures, 6-9 Jan 1988, Madras, India.
Raja, S (2005) Modeling, simulation and implementation of smart concepts13; for structural control applications. In: lnternational Conference on Smart Materials Structures and Systems, 28-30 Jul 2005, Bangalore, India.
Raja, S and Balasubramaniam, R and Bhattacharya, Partha and Cjunjanna, G (2001) Damage modelling and prediction using smart structure concepts - A finite element analysis approach. In: ICTACEM 2001: Second International Conference on Theoretical, Applied, Computational and Experimental Mechanics, 27-30 Dec 2001, Kharagpur, India.
Raja, S and Dwarakanathan, D (2009) MAV Structures and smart Materials Applications. In: MAV Workshop- Challenges and Presferred Outcomes, 13 November 2008, National Aerospace Laboratories.
Raja, S and Shashikala, Rajappa and Janardhanam, S and Muthuraj, H Medar and Raghavendra, HM (2009) Experimental Study on gsLVM3 for Transonic Buffet Estimation. In: National Conference on Scientific Achievements of SC & ST Scientists & Technologiests, 14-16 April 2009, Bangalore.
Raja, S and Sinha, PK and Prathap, Gangan (2002) Active vibration control of a laminated composite plate with PZT actuators and sensors - An experimental study. In: Conference on Smart Materials, Structures and Systems, 12-14 Dec 2002, Bangalore, India.
Rajeevalochanam, P and Ganesh Banda, BV (2017) Mechanical Design and Analysis of Ceramic Stator Blades for Gas Turbine Stage. In: Materials Today: Proceedings.
Rajeevalochanam, P and Murthy, R and Venkata, S and Sunkara, SNA and Kumaran, S and Kapil, S and Mayandi, B (2016) Numerical simulation of twin spool axial flow turbines of a small gas turbine engine. In: Proceedings of the ASME Turbo Expo, 13-17 June 2016, Seoul, South Korea.
Raju, KN and Sunder, R (1984) Research and development in the field of fatigue and fracture mechanics at the National Aeronautical Laboratory. In: Analysis of Structures - A Commemorative volume published on the occasion of the 60th Anniversary of Dr. S.R.Valluri, Dec 1984, NAL, Bangalore, India.
Rao, Babu MN (1984) Three-Dimensional Stress problem of a finite thick plateE with a through crack under tension.13;. In: 6th International Conference on Fracture (ICF6)., New Delhi, India.
Sahoo, PK and Dattaguru, B and Murthy, CRL (2006) Finite Element Analysis of Adhesively Bonded Lap Joints. In: Proceedings of the 14th National Seminar on Aersopace Structures: Fatigue, Fracture and Ageing Structures, 30-31 Jan 2006, Nagpur, India.
Sakthi Sathya, P S and Jain, Saransh and Viswamurthy , SR and Kotresh, Gaddikeri M and Ramesh, Sundaram (2011) Prediction of Strains in the Debond Region of a Composite Box Structure. In: National Conference on Advances in Composites & Solid Mechanics, 7-8 December 2011, Sardar Vallabhai Patel Institute of Technology, Vasad, Gujarat.
Saraswat, S and Gulati, G and Bhardwaj, D and Tangri, S and Singh, Hema (2017) A novel semilumped low-pass filter having finite frequency attenuation poles with defected ground structure. In: 2016 IEEE Annual India Conference, INDICON 2016, 16 - 18 December 2016, Bangalore, India.
Sathish, S and Suryanarayanan, L and Jaidev Vyas, J and Balamurugan, G (2020) Applicability of tricycle modelling in the simulation of aircraft steering system. In: Lecture Notes in Mechanical Engineering.
Sathyanarayana, CN and Raja, S and Durai Arun, P and Mahesh, M and Aparna, BR (2022) Lamb Wave Propagation and Low Velocity Impact Damage Identification in Carbon Fiber Reinforced Plastic (CFRP) Laminates. In: MysuruCon 2022 - 2022 IEEE 2nd Mysore Sub Section International Conference, 16-17 October 2022, Mysuru, India.
Satish, Chandra and Ramachandra, S and Kamath, GM and Karthikeyan, K and Dhayanidhi , J and Vijay, Petley and Ramanaiah, B and Salem, Stanley C and Gowda, MNN and Subbarao, M (2007) Experimental investigations on composite, fibre-metal and metal coupons for high velocity bird impacts. In: 15th National Conference on Aerospace Structures, 15-16 Oct 2007, Coimbatore, Tamil Nadu, India.
Shabaze, M and Sahoo, PK and Jagannatha Guptha, VL (2019) Multiscale material modelling and analysis of carbon fiber/MWCNT/ epoxy composites to predict effective elastic constants. In: Part of special issue: 1st International Conference on Manufacturing, Material Science and Engineering.
Shankar, V and Rajagopal, P and Shashikala, Prakash and Nagaraja , BV and Vijayakumar, PS (1999) Design and Development of Instrumentation for Active Vibration Control of Smart Aerospace Structures. In: Proceedings of the International Conference on Smart Materials, Structures and Systems, 7-10 July 1999, Ninth National Seminar on Aerospace Structures.
Shetty, K and Srihari, Shylaja and Manjunatha, CM (2019) Effect of hygrothermal aging on the interlaminar shear strength of a carbon fibre composite. In: 2nd International Conference on Structural Integrity and Exhibition 2018.
Shridhar, K and Suresha, BS and Mohan Kumar, M (2019) Fatigue Analysis of Wing-Fuselage Lug section of a Transport Aircraft. In: 2nd International Conference on Structural Integrity and Exhibition 2018.
Stanley , C Salem and Kotresh, Gaddikeri M and Gowda, MNN and Ramesh, Sundaram and Dhayanidhi , J and Nagarajappa, B and Sathiya Naarayan, S and Satish, Chandra and Anuradha , Nayak and Vijay , Petley and Ramachandra, S Design and Testing of Wing Leading Edge of a Light Transport Aircraft. In: NASAS 2011, Sep 22-24,2011, IIT Kanpur.
Stanley , C Salem and Kotresh, Gaddikeri M and Gowda, MNN and Ramesh, Sundaram and Dhayanidhi , J and Nagarajappa, B and Sathiya Naarayan, S and Satish, Chandra and Anuradha , Nayak and Vijay , Petley and Ramachandra, S Design and Testing of Wing Leading Edge of a Light Transport Aircraft. In: NASAS 2011, Sep 22-24,2011, IIT Kanpur.
Stanley , C Salem and Viswamurthy , SR and Ramesh, Sundaram (2011) Prediction of Bird Impact behavior of a wing leading edge through Different bird models using Altair RADIOSS. In: Altair Hyperworks users Conference.
Subba Rao, M and Chandra, Ramesh (1984) Experimental investigation of behaviour of a typical riveted finite joint. In: Analysis of Structures - A Commemorative volume published on the occasion of the 60th Anniversary of Dr. S.R.Valluri, Dec 1984, NAL, Bangalore, India.
Sunder, R (1986) Engineering method for crack propagation life estimates under random loading. In: 1ST International Conference of the Engineering Integrity Society, 17-20 March 1986, Bournemouth, UK.
Sunder, R and Prakash, Raghu V and Mitchenko, EI (1994) Growth of artificially and naturally initiating notch root cracks under FALSTAFF spectrum loading. In: AGARD, An Assessment of Fatigue Damage and Crack Growth Prediction Techniques, 1994.
Upadhya, AR and Loughlan, J (1981) The effect of mode interaction in orthotropic fibre reinforced composite plain channel section columns. In: Proceedings of the First International Conference, 16-18 Sept 1981, Scotland, United Kingdom.
Upadhya, AR and Somashekar, BR (1984) Review of Launch Vehicle Related Aeroelastic Instability Studies at HAL. In: Analysis of Structures - A Commemorative volume published on the occasion of the 60th Anniversary of Dr. S.R.Valluri, Dec 1984, NAL, Bangalore, India.
Vepa, Ranjan and Balasubramanian, TS (1980) Numerical treatment of helicopter rotor stability problems. In: Proceedings of the Aerospace Conference of Emerging technologies in Aerospace Structures, Design, Structural Dynamics and Materials, 13-15 Aug 1980, New York.
Vinod Kumar, K and Gopalsamy, B and Rangavittal, HK and Manjunath, C., C (2022) Kinematic Synthesis and Optimization of a Double-Slotted Fowler Flap Mechanism. In: Lecture Notes in Mechanical Engineering.
Viswamurthy, SR and Venkatesh, S and Gaddikeri, KM (2014) Damage Tolerance of Stiffened Skin Composite Panels. In: 18th NASAS (Eighteenth National Seminar on Aerospace Structures), 15-17 December 2014, VNIT Nagpur.
Viswamurthy , SR and Verma, KK and Madhusudan , SP and Kumar, Dinesh (2011) A Study on Co-cured T-joint with Flange/Skin Debond. In: XVII National Seminar on Aerospace Structures, 22-24 September 2011, IIT-Kanpur.
Viswanath, S and Murthy, MVV and Rao, KP Finite element analysis of plates with through cracks from higher order plate theory. In: Sixth International Conference on Fracture (ICF6), 4-10 Dec 1984, New Delhi, India.
Vyas, J and Rengasamy, A and Narayanan, LS and Gopalsamy, B (2022) Theoretical and Experimental Investigation of Friction in Hydraulic Actuators. In: Lecture Notes in Mechanical Engineering.
Ganguli, Ranjan and Thakkar, D and Viswamurthy, SR (2016) Active flap controller evaluation. Springer International Publishing, pp. 103-111.
KavithaMol , S and Stanley , C Salem (2011) Parametric Studies on Bird Impact Behavior of Aircraft Leading Edges. Masters thesis, National Aerospace Laboratories, Bangalore.
Mukherjee, Somenath and Prathap, Gangan (2009) Lectures in FEA (Fundamentals) Lecture 1- Finite Element Analysis using Simple Elements. [["eprint_typename_presentation" not defined]]
Mukherjee, Somenath and Prathap, Gangan (2009) Lectures in FEA (Fundamentals) Lecture 2 - Variational Principles in Computational Solid Mechanics. [["eprint_typename_presentation" not defined]]
Mukherjee, Somenath and Prathap, Gangan (2009) Lectures in FEA (Fundamentals) Lecture 3 - The best-fit paradigm of FEA: Shadows of the exact. [["eprint_typename_presentation" not defined]]
Mukherjee, Somenath and Prathap, Gangan (2009) Lectures in FEA (Fundamentals) Lecture 4 - Special topics of FEA. [["eprint_typename_presentation" not defined]]
