 | Up a level |
Aadhavan, R. and Bera, P. and Anandan, C. and Kannan, S. and Suresh Babu, K. (2017) Phase evolution of EBPVD coated ceria-zirconia nanostructure and its impact on high temperature oxidation of AISI 304. Corrosion Science, 129. pp. 115-125. ISSN 0010938X
Acharya, Shrilatha and Ravishankar, S (2011) Customized CAD/CAM Data Management System for an Aircraft Development Programme. In: PLMSS-2011, 5th to 7th December 2011, Dept of Production Engineering, PSG College of Technology, Coimbatore, Tamil Nadu, India.
Adiga, BS and Shankar, P (1986) Fast public key cryptosystem based on matrix rings. Electronics Letters, 22. pp. 1182-1183.
Akshatha, HT and Rinku, A and Gopalakrishnan, R (2014) DESIGN, DEVELOPMENT AND VALIDATION OF FIRE PROTECTION SCHEME FOR THE ENGINE FIREWALLS AND COWLING OF A TYPICAL LIGHT TRANSPORT AIRCRAFT. ARPN Journal of Engineering and Applied Sciences, VOL. 9 (NO. 4). pp. 415-418. ISSN 1819-6608
Aruna, HM and Guruprasad, K and Murthy, MVV (1985) Finite element Analysis of MiG-21 Rudder. Project Report. National Aerospace Laboratories, Bangalore.
Aruna, ST and Diwakar, S and Jain, Ajana and Rajam, KS (2005) Comparative study on the effect of current density on Ni and Ni-Al2O3 nanocomposite coatings produced by electrolytic deposition13;. Surface Engineering, 21 (3). pp. 209-214.
Balakrishna, S and Niranjana, T (1987) A Low Speed Tunnel Semi Free Dynamic Flying Study of Pitching Derivatives of LCA Delta-5 in Active Control using MLE Procedure. Project Report. National Aerospace Laboratories, Bangalore.
Barshilia, Harish C and Rajam, KS (2005) A Raman-scattering study on the interface structure of nanolayered TiAlN/TiN and TiN/NbN multilayer thin films grown by reactive dc magnetron sputtering. Journal of Applied Physics, 98 (1). 014311-1.
Basu, AJ and Narasimha, R and Prabhu, A (1995) Modelling plane mixing layers using vortex points and sheets. Applied Mathematical Modelling, 19 (2). pp. 66-75.
Bera, Rajendra K (1989) Engineering education and training initiatives for the 1990s. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Bhagawan, BS and Parameswaran, V and Rajeswari, Ramamurthy S and Sridhar, JK and Srinatha Sastry, CV and Ramabhadran, S and Seshadri, SN and Sundaramurthy, H and Yegna Narayan, K (1985) Stability and Control characteristics of MIG-21 aircraft. Project Report. National Aerospace Laboratories, Bangalore.
Bisoyi, Sanjana and Choudhury, Balamati and Jha, RM (2012) Soft Computing Techniques for Metamaterial: A Cross-indexed Bibliography (2003-2012). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Chandranath, M and Raghavendra, and Suresh, R and Ravishankar, S (2014) Part Localization for CNC Machining Using Discrete Point Set Approach. In: International Conference On Trends in Product Life Cycle, Modeling, Simulation and Synthesis PLMSS-2014, 06-08 January 2014, Vellore, Tamil Nadu, India.
Chandrashekar, KR and Muthuvel, S and Manoharan, LC (1984) Fibre optics for analog applications. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Damania, RB (1986) concept study for a 80% scaled Derivative LCA. Project Report. National Aerospace Laboratories, Bangalore.
De, Manabendra M and Mathur, JS and Vengadesan, S (2019) Recurrence studies of insect-sized flapping wings in inclined-stroke plane under gusty conditions. Sadhana - Academy Proceedings in Engineering Sciences, 44 (3). pp. 1-17. ISSN 02562499
Dutta, Soma (2008) Design and simulation of optimum piezoelectric MEMS microactuator for smart control applications. Indian Journal of Engineering and Materials Sciences, 15 (2). pp. 99-103. ISSN 0971-4588
Gopinath, L and Ravishankar, S (2014) Assessment of Form Tolerances by Least Square Method. In: International Conference On Trends in product Life Cycle, Modeling, Simulation and Synthesis PLMSS-2014, 06-08 January 2014, Vellore, Tamil Nadu, India.
Gopinath, L and Ravishankar, S (2014) Influence of Peripheral Milling on Machining of Aircraft Grade Aluminum Alloy. In: International Conference On Trends in Product Life Cycle, Modeling, Simulation and Synthesis PLMSS-2014, 06-08 January 2014, Vellore, Tamil Nadu, India.
Gupta, Nitant and Sasikala, S and Mahadik, DB and Rao, AV and Barshilia, Harish C (2012) Dual-scale rough multifunctional superhydrophobic ITO coatings prepared by air annealing of sputtered indium tin alloy thin films. Applied Surface Science, 258. pp. 9723-9731. ISSN 0042-207X
Gupta, Nitesh and Ramesh, Sundaram (2009) Fiber Optic Sensors for Monitoring Flow in Vacuum Enhanced Resin Infusion Technology VERITy Process. Composites Part A: applied Science and Manufacturing, 40. pp. 1065-1070. ISSN 1359-835X
Guruprasad, R and Marimuthu, P (2014) E-Journals Download Patterns using Web Log Analysis of Selected Publishers among the Aerospace Organizations of Bangalore: A Research Study. Global Journal of Research in Engineering, 14 (1, 1.0). pp. 35-49. ISSN Print: 0975-5861, Online: 2249-4596
Jagannathan, N and Gururaja, S and Manjunatha, CM (2019) Matrix cracking in polymer matrix composites under bi-axial loading. In: 2nd International Conference on Structural Integrity and Exhibition 2018.
Janardhan, S and Ramachandran Nair, KN (1977) Use of B-splines and householder transformations for curve fitting. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Jategaonkar, RV and Murthy, NN and Srinathkumar, S (1986) Aircraft parameter estimation control and simulation (APES) computer: an Evaluation of quotations. Project Report. National Aerospace Laboratories, Bangalore.
Jatinder, Singh and Jategaonkar, RV and Hamers, M (2000) EC 135 Rotorcraft System Identification - Estimation of Rigid Body and Extended Models from Simulated Data. Project Report. National Aerospace Laboratories, Bangalore.
Jeyaseelan, AR and Poornima, N and Senthil Kumaran, R (2012) A Wireless Multichannel Pressure Measurement System for a Rotating Turbo machinery Rig. In: National Symposium on Instrumentation (NSI-37), CSIR-CSIO, Chandigarh.
Joshi, A and Somashekar, BR (1988) Effect of initial curvature on the panel flutter. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Joshi B, Shamala and Narayan, Shiv and Nair, RU and Jha, RM (2012) A Review of the Techniques for EM Analysis of Conformal FSS Structures. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Kamath, GM and Karthikeyan, G (2001) Active control of structures using impedance control method. In: ICTACEM 2001: Second International Conference on Theoretical, Applied, Computational and Experimental Mechanics, 27-30 Dec 2001, Kharagpur, India.
Kanakamuthu, (2003) Wind and Solar Resource Studies at Kanyakumari. Project Report. National Aerospace Laboratories, Bangalore.
Karunakar, K and Murthy, NN and Niranjana, T and Rajan, SR and Shyam, Chetty and Padma, Madhuranath and Shylaja, G Prasad (1987) Design and simulation of a Digital Combat Flap controller for a fighter Aircraft. Project Report. National Aerospace Laboratories, Bangalore.
Kashyap, SK and Raol, JR (2005) Unification and interpretation of fuzzy set operations. Technical Report. National Aerospace Laboratories, Bangalore, India.
Khadeeja Nusrath, TK (2013) Automated Flight Data Management System(AFDMS) for Aircraft System Identification. In: Matlab Expo 2013, 21 Aug 2013, Nimhans Convention Centre, Bangalore.
Kodanda, B (2007) An Analysis and Quick Method of Estimating Passenger and Aircraft Demand for Feeder Airline Services in India. Project Report. CSIR-National Aerospace Laboratories, Bangalore.
Kodanda, B (2009) An Approach for Quick Method of Estimating Passenger and Aircraft Demand for Feeder Air Services in India. Journal of Aerospace Sciences and Technology, 61 (4). pp. 504-518. ISSN 0972-950X
Kodanda, B (2008) Feeder and Short haul air transport systems: Current issues related to infrastructure development for sustainability of Civil Aviation growth in India. Aerospace Engineering Journal, 89. pp. 15-28. ISSN 0257-3423
Kodanda, B and Ashish, Verma (2011) Estimation of Origin-Destination Air Traffic Flows from Air Transport Movement Data: An Application to Indian Domestic Airport Network System. In: 2011 World Conference of Air Transport Research Society (ATRS 2011), June 29-July 2, 2011, School of Aviation, University of New South Wales (UNSW), Sydney, Australia.
Kodanda, B and Selvaraj, R (2003) Advances in Aircraft Engines since 1903. In: 100 Years since First Powered Flight (International Seminar) and Avances in Aerospace Sciences (Technical Seminar) & AeSI-55th AGM, December 2003, Bangalore.
Krishnamurthy, K and Dasannacharya, BS and Indira, Rajagopal (1986) Process for Manufacture of Foil Resistance Strain Gauges. Project Report. National Aerospace Laboratories, Bangalore.
Kumar, S and Onkar, AK and Manjuprasad, M (2021) Probabilistic Flutter Analysis of a Cantilever Wing. In: Advances in Structural Vibration, Singapore.
Kumar P, Arun and Verma, SB and Elangovan, S (2011) Study of jets from rectangular nozzles with square grooves. Aeronautical Journal, 115 (1165). pp. 187-196. ISSN 0001-9240
Madhuranath, Padma (1987) Acoustics of reverberation chamber test facility. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Madhuranath, Padma and Sridhar, JK (1988) Flight simulation of HS-748 with and without rotodome Part 1- mathematical modelling and data. Project Report. National Aerospace Laboratories, Bangalore.
Madhuranath, Padma and Viswanathan, R and Muralidas, S (1980) A survey of the acoustic features of the auditorium in the Systems building. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Maharana, RK and Dubey, Satya Kesh and Jha , RM (2012) Stripline Method for EM Material Characterization. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Mahima, P. and Suprava, M. and Vandana, S. and Yazeen, M.P.S. and Nair, R.U. (2018) EM performance analysis of radomes. SpringerBriefs in Applied Sciences and Technology. pp. 19-41. ISSN 2191530X
Manickam, Sangeetha and Choudhury, Balamati and Jha , RM (2012) Emerging Trends in Soft Computing Techniques for Metamaterial Design and Optimization: A Review. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Manjula, R. and Raju, N.V. and Chakradhar, R.P.S. and Johns, J. Effect of Thermal Aging and Chemical Treatment on Tensile Properties of Coir Fiber. Journal of Natural Fibers, 15 (1). pp. 112-121. ISSN 15440478
Manjunatha, CM and Jagannathan, N and Padmalatha, K and Kinloch, AJ and Taylor, AC (2011) The Effect of Micron-Rubber and Nano-Silica Particles on the Fatigue Crack Growth Behavior of an Epoxy Polymer. International Journal of Nanoscience, 10 (4&5). pp. 1095-1099. ISSN 0219-581X
Manjunatha, CM and Jagannathan, N and Padmalatha, K and Kinloch , AJ and Taylor , AC (2011) Improved variable-amplitude fatigue behavior of a glass-fiber-reinforced hybrid-toughened epoxy composite. Journal of Reinforced Plastics &Composites, 30 (21). pp. 1783-1793.
Manjunatha, CM and Ramesh , Bojja and Jagannathan, N Fatigue Behavior of a Nanocomposite Under a Fighter Aircraft Spectrum Load Sequence. Journal of Nano Research, 24. pp. 58-66. ISSN 1661-9897
Manjunatha, CM and Ramesh , Bojja and Jagannathan, N and Kinloch, AJ and Taylor, AC (2013) Enhanced fatigue behavior of a glass fiber reinforced hybrid particles modified epoxy nanocomposite under WISPERX spectrum load sequence. International Journal of Fatigue, 54. pp. 25-31. ISSN 0142-1123
Manohar, LC and Muthuvel, S (1989) A fiberoptic LAN for aircraft and other applications. Journal of Institution of Engineers, 69. pp. 10-12.
Manoharan, LC and Chandrashekar, KR and Muthuvel, S (1986) Bit rate/bit error rate monitor. Journal of the Institution of Engineers, India, 66. pp. 52-54.
Mohamed, Majeed and Dongare, V (2021) Aircraft System Identification. In: Aircraft Aerodynamic Parameter Estimation from Flight Data Using Neural Partial Differentiation. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 1-11. ISBN 978-981-16-0104-0
Mohamed, Majeed and Dongare, V (2021) Conclusions and Future Work. In: Aircraft Aerodynamic Parameter Estimation from Flight Data Using Neural Partial Differentiation. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 59-60. ISBN 978-981-16-0103-3
Mohamed, Majeed and Dongare, V (2021) Identification of Aircraft Lateral-Directional Derivatives. In: Aircraft Aerodynamic Parameter Estimation from Flight Data Using Neural Partial Differentiation. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 33-46. ISBN 978-981-16-0103-3
Mohamed, Majeed and Dongare, V (2021) Identification of Aircraft Longitudinal Derivatives. In: Aircraft Aerodynamic Parameter Estimation from Flight Data Using Neural Partial Differentiation. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 21-31. ISBN 978-981-16-0104-0
Mohamed, Majeed and Dongare, V (2021) Identification of a Flexible Aircraft Derivatives. In: Aircraft Aerodynamic Parameter Estimation from Flight Data Using Neural Partial Differentiation. SpringerBriefs in Applied Sciences and Technology . Springer, Singapore, pp. 47-58. ISBN 978-981-16-0103-3
Mohamed, Majeed and Dongare, V (2021) Neural Modeling and Parameter Estimation. In: Aircraft Aerodynamic Parameter Estimation from Flight Data Using Neural Partial Differentiation. SpringerBriefs in Applied Sciences and Technology . Springer Science and Business Media Deutschland GmbH, Singapore, pp. 13-19. ISBN 978-981-16-0103-3
Mohan Ram, VS (1985) Parameter Identification of a Surface-to-Surface Missile from Flight Test Data. Project Report. National Aerospace Laboratories, Bangalore.
Mohan Ram, VS and Srinatha Sastry, CV (1985) Post Flight Missile Parameter Identification for aeroballistic range. Project Report. National Aerospace Laboratories, Bangalore.
Muthuvel, S and Manoharan, LC (1987) Versatile digital unidirectional fiberoptic active coupler. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Naidu, VPS (2012) Discrete Cosine Transform based Image Fusion Techniques. Journal of Communication, Navigation and Signal Processing, 1 (1). pp. 35-45.
Naidu, VPS and Garlin, Delphina (2011) Assessment of Color and Infra-Red Images using No-Reference Image Quality Metrics. In: Proceedings of NCATC 2011 .
Naidu, VPS and Rao, Narayana P and Sudesh, K Kashyap and Shantha Kumar, N and Girija, G Experimental Study with Enhanced Vision System Prototype Unit. In: International Conference on Image Information Processing (ICIIP)-2011, 3-5 November , Shimila. (Submitted)
Naidu, VPS Gearbox Health Condition Monitoring: Vibration Analysis. In: A Two Day National Conference on VLSI Design, Signal Processing, Image Processing, Communications & Embedded Systems (VSPICE-2K18), 19-20 July 2018, JNTU, Kakinada.
Narasimhan, SV and Hazarathaiah, M and Giridhar, PVS (2005) Channel blind identixFB01;cation based on cyclostationarity13; and group delay. Signal Processing, 85. pp. 1275-1286.
Narasimhan, SV and Nandini, Basumallick and Veena, S (2011) Introduction to Wavelet Transform- A signal Processing approach. In: Introduction to Wavelet Transform- a Signal Processing approach. Narosa Publishing House, Delhi. ISBN 978-81-8487-081-7
Nitin, V Kamath and Sudesh, K Kashyap and Shantha Kumar, N Automatic Target Recognition using Invariant Target Features and Statistical Classifier. In: International conference on innovative science and engineering technology, 8-9 April 2011, VVP Engineering College, Rajkot, Gujarat, India.
Padma, Madhuranath and Sridhar, JK (1988) Flight simulation of HS -748 with and without rotodome Part 1 - Mathematical modelling and Data. Project Report. National Aerospace Laboratories, Bangalore.
Pai, P and Pratyusha, PL and Naidu, VPS (2019) Geo-Localization of Target in 3-Dimensional Coordinate Using SRTM Data. Journal of The Institution of Engineers (India): Series B, 100 (1). pp. 53-60. ISSN 22502106
Parameswaran, V and Girija, G (1988) Estimation of Stability and Control Derivatives of HS 748 Aircraft from Flight Data by Maximum Likelihood Method. Project Report. National Aerospace Laboratories, Bangalore.
Parameswaran, V and Girija, G (1987) Flight Test Specifications and Preliminary data Analysis for Parameter Identification of HS 748 Aircraft. Project Report. National Aerospace Laboratories, Bangalore.
Parameswaran, V and Girija, G and Raol, JR (1985) Specification of flight test maneuvers for identification experiments on a Jaguar aircraft. Project Report. National Aerospace Laboratories, Bangalore.
Parameswaran, V and Niranjana, UC and Raol, JR (1988) Estimation of states of aircrafts by kalman filtering algorithms. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Prakash, S (1992) Literature Review of Methodology and Test Facilities for Design and Testing of Composite Wind Turbine Blades. Technical Report. National Aerospace Laboratories, Bangalore, India.
Prathap, Gangan and Varadan, TK (1986) Inelastic post-buckling of columns. Journal of Applied Mechanics, 53 (3). pp. 719-721.
Raghavendra Rao, S and Manyam Kothapalli, S.R.S and Ravishankar, S (2014) Study of Bend Angle Allowance for Sheet Metal Forming in Aerospace Industry. In: International Conference on Trends in Product Life Cycle, Modeling Simulation and Synthesis PLMSS-2014, 6th to 8th January 2014, Vellore Institute of Technology, Vellore, TamilNadu, India.
Raghavendra Rao, S and Ravishankar, S (2015) Optimization of Actuating Mechanisms of Flight Control Surfaces through Computer Aided Kinematics. In: ARMS-2015, 30th - 31st January 2015, ISRO, Bangalore.
Raghu Prasad, BK and Pavan Kumar, DVTG (2008) Analysis of composite ENF specimen using higher order beam theories. Thin-Walled Structures, 46 (6). 676 -688.
Rajanna, D and Dhruva , Rao (1987) Airworthiness Test Report on NAL G-Meter (Supplement). Project Report. National Aerospace Laboratories, Bangalore.
Ramamoorthy, P (1985) Some aspects of engineering software activity (ESA)in fluid and thermal sciences at NAL. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Ramesh Babu, C and Prathap, Gangan (1986) Linear thick curved beam element. International Journal for Numerical Methods in Engineering, 23 (7). pp. 1313-1328. ISSN 0029-5981
Ramesh Babu, C and Prathap, Gangan (1985) A linear thick curved beam element. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Rangan, CS and Rajanna, D and Prathapan, T and Dhruwa Rao, NS (1985) Development of G-Meter for the investigation of fatigue life of aircrafts. Project Report. National Aerospace Laboratories, Bangalore.
Rao, Govinda TV and Chandrashekar, C and Shivashankar, N (1986) Design and fabrication of floor grid structure for the test rig of component test facility. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Rao, KVL and Lefebvre, AH (1975) Fuel atomization in a flowing airstream (for turbofan engines). AIAA Journal, Vol.13. pp. 1413-1415. ISSN 0001-1452
Rao, MNB and Murthy, MVV (1977) Stress concentration around an elliptic hole in a cylindrical shell under torsion with major axis of the hole perpendicular to the shell axis. Journal of Applied Mechanics, Vol. 4. pp. 184-186.
Rao, Narayana P and Sudesh, K Kashyap and Naidu, VPS and Shantha Kumar, N and Girija, G (2011) An experiment on enhanced and synthetic vision system. In: Annual Seminar in Hindi, 10th August 2010, NAL.
Rao, Venkat U (1986) 3D co-ordinate measuring machine. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Raol, JR and Girija, G and Mohan Ram, VS (1988) Estimation of Aerodynamic Derivatives of Missiles from Range and Simulated Data Using Nonlinear Maximum Likelihood Method. Project Report. National Aerospace Laboratories, Bangalore.
Ravichandran, KS (1997) Higher Order KFVS Algorithms Using Compact Upwind13; Difference Operators. Journal of computational physics, 130. pp. 161-173.
Reddy, Neelakanta and Bera, Parthasarathi and Reddy, V Rajagopal and Sridhara, N and Dey, Arjun and Anandan, C and Sharma, AK (2014) XPS study of sputtered alumina thin films. Ceramics International, 40 (Issue ). pp. 11099-11107. ISSN 0272-8842
Renukadevi, M and Murali, S and Viswanathan, R (1984) A statistical analyser for noise signals. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Revathi, A. and Sendil Murugan, M. and Rao, S. Thermo-mechanical creep and recovery of CTBN–epoxy shape memory polymers under saline environment. Lecture Notes in Mechanical Engineering. pp. 361-368. ISSN 21954356
Richand, Edna and Anandan, C and Aruna, ST (2016) Fabrication of Superhydrophobic Zinc Stearate Hierrchical Surfaces from Different Precursors. Materials and Manufacturing Processes. pp. 1-6. ISSN 1042-6914
SED, - (1986) Annual Ramp;D report for 1985 of systems engineering division. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Saijal , KK and Ganguli, Ranjan and Viswamurthy , SR (2011) Optimization of Helicopter Rotor Using Polynomial and Neural Network Metamodels. Journal of Aircraft, 48 (2). pp. 553-566. ISSN 0021-8669
Sajjan, Sharanappa V and Savanur, RA and Mudkavi, Vidyadhar Y (2009) CFD Analysis of 500 kW Horizontal-Axis Wind Turbine Blades: Straight and Bent Cases. In: 11th Annual CFD Symposium 11th − 12 th August 2009, Bangalore.
Sankar, N and Madhavan, Chinmayee and Dasannacharya, BS and Rajanna, D (1984) Friction and wear monitoring system. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Sateesh, VL and Senthilkumar, P and Satisha, Vishwanath and Dayananda, GN (2014) A posteriori processing for estimation of low cycle fatigue failure in SESMA wires. Materials Science and Engineering A, 594. pp. 212-217. ISSN 0921-5093
Sengupta, S and Sengupta, TK and Puttam, JK and Vajjala, KS (2020) Global spectral analysis for convection-diffusion-reaction equation in one and two-dimensions: Effects of numerical anti-diffusion and dispersion. Journal of Computational Physics, 408. ISSN 00219991
Shabaze, M and Sahoo, PK and Jagannatha Guptha, VL (2019) Multiscale material modelling and analysis of carbon fiber/MWCNT/ epoxy composites to predict effective elastic constants. In: Part of special issue: 1st International Conference on Manufacturing, Material Science and Engineering.
Shah, CG and Nagesh, KS (1989) Static Analysis of Rotodomed Aircraft Using ASKA - Vertical Gust Load Case (Vg). Project Report. National Aerospace Laboratories, Bangalore.
Shiv, Narayan and Arun, K and Jha , RM (2012) EM Performance Analysis of Tri-layer Metamaterial FSS for Radome Applications. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Singh, Jatinder and Saraf, Amitabh and Patel, Vijay V and Basappa, - and Tharewal, Sachin (2011) Application on system identification techniques to Tejas flight test data. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.
Singh, Manish K and Ramesh, V and Mathur, JS and Deshpande, SM (2007) Eigen direction based weighted low dissipation grid-free method. In: Proceedings of the Engineering Design, 9-11 Aug 2007, Bangalore, India.
Siva Kumar , K and Sajjan, Sharanappa V (2013) Three-dimensional Unsteady Flow over a Heaving Rectangular Wing. Frontiers in Aerospace Engineering, Volume (Issue ). pp. 199-206. ISSN 2325-6796
Sridhara, K and Paranjpe, PA (1976) Operational behaviour of a turboprop engine. In: 3rd International Symposium on Air Breathing Engines, 7-12 Mar 1976, Munich, West Germany.
Sridhara, K and Thunga, KS (1974) Design and development of a cold air turbine. Technical Report. National Aerospace Laboratories, Bangalore,India.
Srinathkumar, S (2019) Rotorcraft precision hover control in atmospheric turbulence via eigenstructure assignment. Journal of the American Helicopter Society, 64 (1). pp. 1-12. ISSN 00028711
Sujata, M and Jagannathan, N and Raghavendra, K and Manjunatha, CM and Bhaumik, SK (2013) Fatigue Fracture of a Compressor Disc of an Aeroengine. Journal of Failure Analysis and Prevention. pp. 1-8.
Sujata, M and Madan, M and Raghavendra, K and Bhaumik, SK (2013) Fretting fatigue in aircraft components made of Ti-A1-V alloys. Procedia Engineering, 55. pp. 481-486. ISSN 1877-7058
Sujata, M and Madan, M and Raghavendra, K and Jagannathan, N and Bhaumik, SK Unraveling the cause of an aircraft accident. Engineering Failure Analysis, 97. pp. 740-758. ISSN 13506307
Sunder, R (1990) Automated fatigue and fracture laboratory with multiple load frames and single host computer system 13; 13;. In: Applications of automation technology to fatigue and fracture testing; Proceedings of the Symposium, 22-23 May 1989, Kansas City, United States.
Sunder, R and Prakash, Raghu V (1994) Study of fatigue crack growth in lugs under spectrum loading. In: 3rd ASTM Symposium on Advances in Fatigue Lifetime Predictive Techniques, 16-17 May 1994, Montreal, Quebec.
Suriyanarayanan, P and Venkatakrishnan, L and Jagadeesh, G (2013) Time Evolution of the Density Field of a Micro–Explosion Using Background Oriented Schlieren. In: International Symposium on shock waves, 14 Jul 2013, University of Wisconsin-Madison, USA.
Suseela, GR and Ramachandra, HV and Balasubramanian, TS and Madhava, MR (1994) NALLA-2 : Strain measurements. Project Report. National Aerospace Laboratories, Bangalore.
Suseela, GR and Sridhara, S and Seetharam, SA and Madhava, MR (1994) NALLA2: Adhesive bond quality evaluation. Project Report. National Aerospace Laboratories, Bangalore.
Thulasi Durai, D and Viswamurthy , SR and Balasubramani, S and Rohit, C and Dayananda, GN (2010) Grid based construction of a composite micro air vehicle airframe. Journal of Aerospace Sciences and Technologies, 62 (2). pp. 132-140. ISSN 1735-2134
Vaitheeswaran, SM and Narasimhan, SV (2008) Stencil coefficient computations for the multiresolution time domain method - A filterbank approach. Progress in Electromagnetics research-PIER, 81. pp. 149-166.
Veera Sesha Kumar, C and Ramachandra, HV and Varughese, Byji and Kotresh, Gaddikeri M and Ramesh, Sundaram and Subba Rao, M (2006) Damage Growth Studies on Composite Flap Structures Under Fatigue Loading. In: XIV National Seminar on Aerospace Structures, 30-31 January 2006, Visvesvaraya National Institute of Technology, Nagpur.
Venkatachalam, K and Krishnan, A and Rangarajan, V and Rajagopalan, E and Subba Rao, M and Haque, CI and Mohan, KH (1990) Draft proposal for establishment of CNC centre at NAL. Project Report. National Aerospace Laboratories, Bangalore.
Wind Energy Programme, (1991) Wind velocity data at two locations on kappata hills, Gadag, Karnataka period: Jan-Dec 1990. Technical Report. National Aerospace Laboratories, Bangalore, India.
