 | Up a level |
Balasubramaniyam, Thiruveni and Choudhury, Balamati and Jha, RM (2012) Metamaterial Invisibility Cloaks: A Review. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Reddy, IN and Reddy, VR and Dey, A and Sridhara, N and Basavaraja, S and Bera, Parthasarathi and Anandan, C and Sharma, AK (2014) Microstructural studies of e-beam evaporated alumina thin films. Surface Engineering, 30 (8). 594-599. ISSN 1743-2944
Abhilash, KJ and Porkodi, P and Shukla, HK (2019) Wet spinning of low cost carbon fiber precursor-lignin incorporated polyacrylonitrile co-polymer fiber. In: AIP Conference Proceedings.
Alex, S and Kumar, P R and Chattopadhyay, K and Barshilia, Harish C and Basu, B (2019) Thermally evaporated Cu–Al thin film coated flexible glass mirror for concentrated solar power applications. Materials Chemistry and Physics, 232. pp. 221-228. ISSN 02540584
Amirthan, G and UdayaKumar, A and Balasubramanian, N (2011) Thermal conductivity studies on Si/SiC ceramic composites. Ceramics International, 37. pp. 423-426. ISSN 0272-8842
Amirthan, G and UdayaKumar, A and Prasad, VVB and Balasubramanian, M (2010) Solid particle erosion studies on biomorphic Si/SiC ceramic composites. Wear, 268. pp. 145-152. ISSN 0043-1648
Anandan, K and Brahma, KK and Raju, KN (1989) Fatigue crack propagation in AI-Li alloys. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Anandan, C and Mohan, L (2016) Effect of PostNitride Annealing on Wear and Corrosion Behavior of Titanium Alloy Ti-6Al-4V. Journal of Materials Engineering and Performance, 25 (10). pp. 4416-4424. ISSN 10599495
Anil Kumar, A and Ramesh, Sundaram and Kundan , K Verma and Kailash , Singh (2008) Determination of ‘Pressure Application Window’ (PAW) for the Vacuum Enhanced Resin Infusion Technology (VERITy) Process. In: Composite Materials and Processrs for the Future (INCCOM7) , 4-5, December 2008, National Aerospace Laboratories.
Anil Kumar, A and Sundaram, Ramesh (2016) Cure cycle optimization for the resin infusion technique using carbon nanotube additives. Carbon, 96. pp. 1043-1052. ISSN 0008-6223
Anilchandra, AR and Bojja, R and Jagannathan, N and Manjunatha, CM (2016) Prediction of mode II delamination propagation life under a standard spectrum loading in a carbon fiber composite. Journal of Composite Materials, 51 (20). pp. 2827-2833. ISSN 0021-9983
Anilchandra, AR and Bojja, R and Jagannathan, N and Manjunatha, CM (2016) Variable Amplitude Fatigue Testing to Characterize Mode II Delamination in a Polymer Composite. Transactions of the Indian Institute of Metals, 69 (2). pp. 421-424. ISSN 09722815
Anjana, Jain (2005) Thermally induced structural changes in Twaron fibres using13; crystallographic date. In: ISAMPE National Conference on Composites / INCCOM - IV, 9-10 Dec 2005, Coimbatore, India.
Anjana, Jain and Jayanth Kumar, S and Srikanth, S and Rathod, VT and Mahapatra, D Roy (2012) Sensitivity of Polyvinylidene Fluoride Films to Mechanical Vibration Modes and Impact After Optimizing Stretching Conditions. Power Engineering and Science, 53 (4). pp. 1-9.
Anjana, Jain and Prashant, KJ and Sharma, AK and Jain, Arpit and Rashmi, PN and Jayanth, KS (2015) Dielectric and Piezoelectric Properties of PVDF/PZT Composite. Polymer Engineering and Science, 55 (7). pp. 1590-1616.
Anjana, Jain and Vijayan, Kalyani (1995) Development of software to scan the N onbonded intermolecular interactions. Technical Report. National Aerospace Laboratories, Bangalore, India.
Anjana, Jain and Vijayan, Kalyani (2002) Thermally induced structural changes in Nomex fibres. Bulletin of Material Science, 25 (4). pp. 341-346.
Anjana, Jain and Prashanth, KJ and Sharma, AK and Arpit, Jain and Rashmi, PN (2015) Dielectric and piezoelectric properties of PVDF/PZT composites: A review. Polymer Engineering and Science, 55 (7). pp. 1589-1616. ISSN 00323888
Ansari, NI and Sivagnanapalani, P and Sureshkumar, V and Shivaraj, BW and Panda, PK (2021) Synthesis of lanthanum titanate (La2Ti2O7) for high temperature sensor applications. Journal of Materials Science: Materials in Electronics, 32 (23). pp. 27422-27428. ISSN 09574522
Antony, G Jerald Maria and Bhavya, BK and Raja, S and Aruna, ST (2022) Solvent casting-assisted synthesis of thermally responsive shape memory polymer and its composites. Polymer Bulletin. pp. 1-22. ISSN 01700839
Antony, G Jerald Maria and Jarali, Chetan S and Aruna, ST and Raja, S (2017) Tailored poly(ethylene) glycol dimethacrylate based shape memory polymer for orthopedic applications. Journal of the Mechanical Behavior of Biomedical Materials, 65. pp. 857-865. ISSN 17516161
Antony, GJM and Aruna, ST and Jarali, CS and Raja, S (2021) Electrical and thermal stimuli responsive thermoplastic shape memory polymer composites containing rGO, Fe3O4 and rGO–Fe3O4 fillers. Polymer Bulletin, 78 (11). pp. 6267-6289.
Antony Jeyaseelan, A and Rangappa, D and Dutta, Soma (2019) Double doping effect on ferroelectric and leakage current behavior of Pb(Zr0.52Ti0.48)O3 thin film. Ceramics International, 45 (18). pp. 25027-25033.
Antony Jeyaseelan, A. and Rangappa, D. and Dutta, S. (2017) Effect of Eu3 + doping on curie temperature and fatigue properties of Pb,La(ZrTi)O3 films. Thin Solid Films, 642. pp. 136-141. ISSN 00406090
Ariharan, S and Sengupta, P and Nisar, A and Agnihotri, A and Balaji, N and Aruna, ST and Balani, K (2016) Dual-Layer Oxidation-Protective Plasma-Sprayed SiC-ZrB2/ Al2O3-Carbon Nanotube Coating on Graphite. Journal of Thermal Spray Technology, 26. pp. 417-431. ISSN 1059-9630
Arun Kumar , KN and Lohith, N and Ganesh, BB (2012) Effect of ribs and stringer spacings on the weight of aircraft structure for aluminum material. Journal of Applied Sciences, 12 (10). pp. 1006-1012. ISSN 1812-5654
Aruna, HM and Guruprasad, K and Murthy, MVV and Chandra, Ramesh (1986) Finite element analysis of composite rudder for MiG-21 aircraft. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Aruna, ST and Anandan, C and William Grips, VK Effect of probe sonication and sodium hexametaphosphate on the microhardness and wear behavior of electrodeposited Ni–SiC composite coating. Applied Surface Science, 301 . pp. 383-390. ISSN 0042-207X
Aruna, ST and Rajam, KS (2004) Mixture of fuels approach for the solution combustion synthesis13; of Al2O3x2013;ZrO2 nanocomposite. Materials Research Bulletin, 39 (2). pp. 157-167.
Aruna, ST and Roy, Shibayan and Sharma, A and Savitha, G and William Grips, VK (2014) Cost-effective wear and oxidation resistant electrodeposited Ni–pumice coating. Surface and Coatings Technology, 251. pp. 201-209. ISSN 0257-8972
Aruna, ST and William Grips, VK (2012) Electrodeposited nickel composite coating containing in-situ nickel impregnated alumina particles. Materials Letters, 1 (66). pp. 141-143. ISSN 0167-577X
Aruna, ST and William Grips, VK and Rajam, KS (2009) Ni-based electrodeposited composite coating exhibiting improved microhardness, corrosion and wear resistance properties. Journal of Alloys and Compounds, 468. pp. 546-552. ISSN 0925-8388
Council of Scientific and Industrial Research - National Aerospace Laboratories (2012) Process for preparing nickel based nanocomposite coating containing particles of Yttria Stabilized Cubic Zirconia-Alumina (NI-YZA) useful for tribological applications and NI-YZA nanocomposite coating prepared thereby. IN 254523.
Aruna, ST and Arunima, S and Latha, S and William Grips, VK (2016) Preparation of Oil-Encapsulated Microcapsules and Tribological Property of Ni Composite Coating. Materials and Manufacturing Processes, 31 (1). pp. 107-111. ISSN 10426914
Aruna, ST and Balaji, LS and Kumar, SS and Prakash, BS (2017) Electrospinning in solid oxide fuel cells – A review. Renewable and Sustainable Energy Reviews, 67. pp. 673-682. ISSN 13640321
Aruna, ST and Kiran, A and Shilpa, M (2019) Reclamation of thermal power plant waste as a distributed phase in electrodeposited Ni composite coating. Surface Engineering, 35 (12). pp. 1042-1047.
Aruna, ST and Kulkarni, Saraswathi and Chakraborty, M and Kumar, SS and Balaji, N and Mandal, C (2017) A comparative study on the synthesis and properties of suspension and solution precursor plasma sprayed hydroxyapatite coatings. Ceramics International, 43 (13). pp. 9715-9722. ISSN 02728842
Aruna, ST and Lashmi, PG and Seema, HM (2016) The effect of additives on the properties of electrodeposited Ni-zircon composite coatings. RSC Advances, 6 (14). pp. 11185-11192. ISSN 20462069
Aruna, ST and Shilpa, M (2021) Solution combustion synthesis of calcium phosphate-based bioceramic powders for biomedical applications. In: Nanomaterials and Their Biomedical Applications. Springer Series in Biomaterials Science and Engineering . Springer, Singapore, pp. 175-196. ISBN 978-981-33-6252-9
Aruna, ST and Srinivas, G (2015) Wear and corrosion resistant properties of electrodeposited Ni composite coating containing Al2O3-TiO2 composite powder. Surface Engineering, 31 (9). pp. 708-713. ISSN 02670844
Aruna, ST and Vismaya, A and Balaji, N (2021) Photocatalytic behavior of titania coatings fabricated by suspension and solution precursor plasma spray processes. Materials and Manufacturing Processes, 36 (7). pp. 868-875. ISSN 10426914
Arunkumar, KN and Lohith, N (2014) Effect of ribs and stringer spacings on the weight of aircraft composite structures. ARPN Journal of Engineering and Applied Sciences, 9 (4). pp. 433-439. ISSN 1819-6608
Ashok Kumar, A and Alagar, M and Rao, RMVGK (2002) Synthesis and characterization of siliconized epoxy- 1, 3-bis(maleimido) benzene intercrosslinked matrix materials. Polymer, 43. pp. 693-702.
Atchuta, S.R and Barshilia, H.C. and Sakthivel, S (2019) High-temperature stable spinel nanocomposite solar selective absorber coating for concentrated solar thermal application. In: Proceedings of the ISES Solar World Congress 2019 and IEA SHC International Conference on Solar Heating and Cooling for Buildings and Industry.
Augustin, M.J and Ramesh, V and Prasad, RK and Gupta, N and Kumar, MR (2021) Detection of inclusion by using 3D laser scanner in composite prepreg manufacturing technique using convolutional neural networks. Machine Vision and Applications, 32 (6). ISSN 09328092
Augustin, MJ and Amitabha, D and Sakthi Sathya, P S and Nitesh, Gupta and Viswamurthy, SR and Kotresh, Gaddikeri M and Sundaram, Ramesh (2017) Development of Strain Measurement Based On-line Impact Monitoring System for Composite Structures. In: Proceedings of the 11th International Workshop on Structural Health Monitoring, IWSHM 2017, 12 -14 September 2017, USA.
Augustin, MJ and Datta, A and Gupta, N and Viswamurthy, SR and Gaddikeri, KM and Sundaram, Ramesh (2021) Strain sensor's network for low-velocity impact location estimation on carbon reinforced fiber plastic structures: Part-I. Indian Journal of Pure and Applied Physics, 59 (2). pp. 116-124. ISSN 00195596
Augustin, MJ and Ramesh, V and Prasad, RK and Gupta, N and Kumar, MR (2021) Detection of inclusion by using 3D laser scanner in composite prepreg manufacturing technique using convolutional neural networks. Machine Vision and Applications, 32 (6). ISSN 0932-8092
Avinash , NV and Jha, RM (2009) Electromagnetic Characterization of Metamaterials using Free Space Measurement System. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Babu, MD (2022) Investigation of Pilot Inceptor Workload and Workload Buildup Technique Through Simulator and In-Flight Studies. International Journal of Aerospace Psychology, 32 (2-3). pp. 65-94. ISSN 24721840
Babu Rao, D and Baskey, D and Rawat, RS (2009) Water Jet Cutter: An Efficient Tool for Composite Product Development. In: National Conference on Scientific Achievements of SC & ST Scientits & technologists, 14-16 April 2009, Bangalore.
Baidya, T and Murayama, T and Nellaiappan, S and Katiyar, NK and Bera, Parthasarathi and Safonova, O and Lin, M and Priolkar, KR and Kundu, S and Srinivasa Rao, B and Steiger, P and Sharma, S and Biswas, K. and Pradhan, SK and Lingaiah, N and Malviya, KD and Haruta, M (2019) Ultra-Low-Temperature CO Oxidation Activity of Octahedral Site Cobalt Species in Co3O4 Based Catalysts: Unravelling the Origin of the Unique Catalytic Property. Journal of Physical Chemistry C, 123 (32). pp. 19557-19571. ISSN 19327447
Balakrishnan, B and Raja, S and Rajagopal, A (2021) Influence of MWCNT fillers on vibroacoustic characteristics of polymer nanocomposite and coated aircraft panels. Applied Acoustics, 172. ISSN 0003682X
Balamurugan, R and Biswanath, Mondal and Sukamal, Ghosh (2009) Optimisation of machining parameters for hard machining: grey relational theory approach and ANOVA. International Journal of Advanced Manufacturing Technology, 45 (11-12). pp. 1068-1086. ISSN 1068-1086
Balamurugan, R and Moorthy, Emayavaramba MV and Sundaram, Ramesh (2008) Viman Vikas: On-Line quality assurance software for manufacturing of Aircraft Composites Structures. In: Proceedings of the ISAMPE National Conference on Composites INCCOM-7, 4-5 Dec 2008, Bangalore, India.
Balaraju, JN and Sankara Narayanan, TSN and Seshadri, SK (2006) Structure and phase transformation behaviour of electroless Nix2013;P composite coatings. Materials Research Bulletin, 41. pp. 847-860.
Balaraju, JN and Anandan, C and Rajam, KS (2005) Morphological study of ternary Ni-Cu-P alloys by atomic force microscopy13;. Applied Surface Science, 250 (1-4). pp. 88-97. ISSN 0042-207X
Balaraju, JN and Jahan, SM and Rajam, KS (2006) Studies on autocatalytic deposition of ternary Ni-W-P alloys using nickel sulphamate bath. Surface and Coatings Technology, 201 (3-4). pp. 507-512. ISSN 0257-8972
Balaraju, JN and Kalavati, - and Rajam, KS (2004) Preparation and Characterization of Autocatalytic Ni-P-A12O3 NANO composite coatings. In: International Convention on Surface Engineering, 25-27, Bangalore.
Balaraju, JN and Manikandanath, NT and Karuppannan, D and Sanjeev Kumar, S (2013) Drilling of carbon epoxy composite using nanocrystalline nickel alloy coated tools. In: INCCOM-12, 12 Dec 2013, HAL, Bangalore.
Balaraju, JN and Narayanan, Sankara TSN and Seshadri, SK (2001) Evaluation of the corrosion resistance of electroless Ni-P and Ni-P composite coating by electrochemical impedance spectroscopy. Journal of Solid State Electrochemistry, 5. pp. 334-338.
Balaraju, JN and Rajam, KS (2006) Preparation and characterization of electroless nickel composite coatings containing submicron S13N4 particles. In: National Symposium on Electrochemical Science and Technology (NSEST-2006), 21-22 Jul 2006, Bangalore, India.
Balaraju, JN and Rajam, KS STUDIES ON ELECTROLESS Ni-W-P TERNARY ALLOY. Transactions of the Metal Finishers Association of India, 12 (1-2). pp. 80-88.
Balaraju, JN and Ezhil Selvi, V and Srivastava, Meenu and Thayee, MN and Murugasen, G and Ramasamy, S and Kale, SS and Kasturi, NV and Manjunatha, CM (2021) Development and certification of chromic acid-free anodizing process for aircraft grade aluminium alloys. Indian Journal of Engineering & Materials Sciences, 28 (1). pp. 21-27. ISSN 0971-4588
Balaraju, JN and Priyadarshi, A and Kumar, V and Manikandanath, NT and Kumar, PP and Ravisankar, B (2016) Hardness and wear behaviour of electroless Ni–B coatings. Materials Science and Technology (United Kingdom), 32 (16). pp. 1654-1665. ISSN 02670836
Balaraju, JN and Radhakrishnan, P and Ezhilselvi, V and Kumar, A and Chen, Z and Surendran, KP (2016) Studies on electroless nickel polyalloy coatings over carbon fibers/CFRP composites. Surface and Coatings Technology, 302. pp. 389-397. ISSN 02578972
Balasingh, C and Gururaja, B and Rohini, S (1993) Residual stress distribution in the As-received aluminum-lithium alloy sheet. Technical Report. National Aerospace Laboratories, Bangalore, India.
Balasingh, C and Kanakalatha, P and Sridhar, MK and Singh, AK (1988) Residual stresses in aluminium alloy sheet/aramid fiber laminated composites. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Balasingh, C and Kanakalatha, P and Sridhar, MK and Singh, AK (1989) Residual stresses in aluminum alloy sheet/aramid fiber laminated composites. Indian Journal of Physics, 63A. pp. 262-266.
Balasubramanian, TS and Rao, RMVGK (1991) Generation of preliminary design data on basic composite materials used in the NAL light aircraft (NALLA) phase I. Technical Report. National Aerospace Laboratories, Bangalore, India.
Banerjee, K and Pearline, D and Kamath, N and Thiagarajan, N and Thiagarajan, P (2016) A green Hibiscus cannabinus oil emollient cream for potential topical applications. Research Journal of Pharmacy and Technology, 9 (6). pp. 735-740. ISSN 09743618
Banerjee, K and Thiagarajan, N and Thiagarajan, P (2017) A flaxseed oil emulgel formulation for prospective food applications synthesis and characterization. Research Journal of Pharmacy and Technology, 10 (6). pp. 1802-1808. ISSN 09743618
Bapu Rao, MN and Murthy, MVV and Subramanya Sastry, SS and Rajakumar, A and Anoop, Jharia and Dwarakanath, K (1991) A Report on the Preliminary design of Composite Cocured LCA Fin. Project Report. National Aerospace Laboratories, Bangalore.
Barat, K and Bharata, - and Venkateswarlu, K and Rangaraj, L (2022) Dry Sliding Wear Behavior of Magnesium Composites with Ti3AlC2 Reinforcement: Tribological Responses and Underlying Mechanisms. Journal of Materials Engineering and Performance, 32. pp. 4986-4997. ISSN 10599495
Barat, K and Das, G and Bharathy, S and Ghosh, M (2019) Compositional optimization of a commercially produced ferritic steel using microstructural heterogeneity and mechanical properties. Materials Performance and Characterization, 8 (1). pp. 566-581. ISSN 2379-1365
Barat, K and Ghosh, A and Doharey, A and Mukherjee, S and Karmakar, A (2022) Crystallographic evaluation of low cycle fatigue crack growth in a polycrystalline Ni based superalloy. International Journal of Plasticity, 149. ISSN 07496419
Barat, K and Shivaprasad, S and Kar, SK and Tarafder, S (2019) Low-cycle fatigue of IN 718: Effect of waveform. Fatigue and Fracture of Engineering Materials and Structures, 42 (12). pp. 2823-2843. ISSN 8756758X
Barshilia, Harish C (2007) Nanostructured multilayer superlattice coatings and nanocomposite coating. In: Workshop on Nanomaterials and Technology - A perspective, 15 Mar 2007, Bangalore, India.
Barshilia, Harish C and Deepthi, B and Prabhu, ASA and Rajam, KS (2006) Superhard nanocomposite coatings of TiN/Si3N4 prepared by reactive direct current unbalanced magnetron sputtering. Surface amp; Coatings Technology, 201 (1-2). pp. 329-337.
Barshilia, Harish C and Deepthi, B and Rajam, KS (2007) Deposition and characterization of CrN/Si3N4 and CrAlN/Si3N4 nanocomposite coatings prepared using reactive DC unbalanced magnetron sputtering. Surface and Coatings Technology, 201 (24). pp. 9468-9475. ISSN 0257-8972
Barshilia, Harish C and Deepthi, B and Rajam, KS (2006) Deposition and characterization of TiAlN/Si3N4 superhard nanocomposite coatings prepared by reactive direct current unbalanced magnetron sputtering. Vaccum, 81 (4). pp. 479-488.
Barshilia, Harish C and Deepthi, B and Rajam, KS (2010) Transition metal nitride-based nanolayered multilayer coatings and nanocomposite coatings as novel superhard materials. In: Nanostructured Thin Films and Coatings: Mechanical Properties. CRC Press; Taylor & Francis Group, pp. 427-480. ISBN 978-1-4200-9402-2
Barshilia, Harish C and Deepthi, B and Rajam, KS and Kanwal Preet, Bhatti and Chaudhary, Sujeet (2009) Growth and characterization of TiAlN/CrAlN superlattices prepared by reactive direct current magnetron sputtering. Journal of Vacuum Science andTechnology A, 27 (1). pp. 29-36. ISSN 0022-5355
Barshilia, Harish C and Deepthi, B and Srinivas, G and Rajam, KS (2012) Sputter deposited low-friction and tough Cr-Si3N4 nanocomposite coatings on plasma nitrided M2 steel. Vacuum, 86 (8). pp. 1118-1125. ISSN 0042-207X
Barshilia, Harish C and Ghosh, Moumita and Shashidhara, Acharya and Rajarama, Krishna and Rajam, KS (2010) Deposition of TiAlSiN nanocomposite coatings using four-cathode reactive direct current unbalanced magnetron sputtering system. In: International Conference on Surface Modification Technologies XXIII, November 2-5, 2009, GRT Temple Bay, Mamallapuram.
Barshilia, Harish C and Ghosh, Moumita and Shashidhara, Acharya and Suresh, T.N. and Rajam, KS (2010) Characterization of TiAlCrYN nanocomposite coatings prepared using four-cathode reactive unbalanced direct current magnetron sputtering system. In: International Conference on Nanomaterials and Nanotechnology, 13-16 Dec 2010, KS Rangasamy College of Technology, Tiruchengode.
Barshilia, Harish C and Moumita, Ghosh and Shashidhara, Acharya and Raja, Ramakrishna and Rajam, KS (2010) Deposition and characterization of TiAlSiN nanocomposite coatings prepared by reactive pulsed direct current unbalanced magnetron sputtering. Applied Surface Science, 256 (21). pp. 6420-6426. ISSN 0042-207X
Barshilia, Harish C and Rajam, KS (2004) Deposition of TiN/a-C superhard nanocomposite coatings. Journal of Electrochemical Society of India, 53. p. 95.
Barshilia, Harish C and Rajam, KS (2003) Nanolayered TiN/NbN multilayers as new superhard materials. In: International conference on advances in surface treatment: research and application, November 4, 2003, Hotel Viceroy, Hyderabad.
Barshilia, Harish C and Rajam, KS (2010) Nanostructured multilayer superlattice coatings and nanocomposite coatings. In: Surface Engineering. Daya Publishing House, p. 266.
Barshilia, Harish C and Rajam, KS (2006) Reactive sputtering of hard nitride coatings using asymmetric-bipolar pulsed DC generator. Surface and Coatings Technology, 201 (3-4). pp. 1827-1835. ISSN 0257-8972
Barshilia, Harish C and Rajam, KS and Anjana, Jain and Gopinadhan, K and Chaudhary, Sujeet (2006) A comparative study on the structure and properties of nanolayered TiN/NbN and TiAlN/TiN multilayer coatings prepared by reactive direct current magnetron sputtering. Thin Solid Films, 503. pp. 158-166.
Barshilia, Harish C and Selvakumar, N and Deepthi, B and Rajam, KS (2006) A comparative study of reactive direct current magnetron sputtered CrAlN and CrN coatings. Surface and Coatings Technology, 201 (6). pp. 2193-2201. ISSN 0257-8972
Barshilia, Harish C and Selvakumar, N and Rajam, KS and Gopinadhan, K and Chaudhary, Sujeet (2008) Investigation of interface properties of sputter deposited TiN/CrN superlattices by low-angle X-ray reflectivity. Journal Of Physics D: Applied Physics, 41 (205409).
Barshilia, Harish C and Shashidhara, Acharya and Moumita, Ghosh and Suresh, T.N. and Rajam, KS and Konchady, Manohar and Pai, Devdas and Sankar, Jagannathan (2010) Performance evaluation of TiAlCrYN nanocomposite coatings deposited using four-cathode reactive unbalanced pulsed direct current magnetron sputtering system. Vacuum, 85. pp. 411-420. ISSN 0042-207X
Barshilia, Harish C and William Grips, VK and Rajam, KS (2004) Corrosion behavior of nanolayered TiAlN/CrN multilayer coatings prepared by reactive DC magnetron sputtering process. Journal of Electrochemical Society of India, 53. p. 85.
Barshilia, Harish C and Lakshmi, RV and Bera, P and Bai, J Basu and Srinivas, G and Praveen Kumar, V and Manikandanath, NT (2022) Transition metal nitride/oxide-based multilayer PVD coating with sol–gel derived ormosil passivation layer as an efficient solar absorber: Studies on high temperature stability and performance evaluation. Solar Energy, 239. pp. 283-293. ISSN 0038092X
Basha, Amjad M and Jain, Anjana and Premnath, K Jagadesh and Vijayan, Kalyani (2002) POLYSEARCH -A Database on Polymers Used in Aerospace. Technical Report. National Aerospace Laboratories, Bangalore, India.
Basu, Bharathibai J and Dinesh Kumar, V and Anandan, C (2012) Surface studies on superhydrophobic and oleophobic polydimethylsiloxane-silica nanocomposite. Applied Surface Science, 261. pp. 807-814. ISSN 0042-207X
Basu, Bharathibai J and Rajagopalan, SR (1993) Polarographic Determination of Trace Amount of Titanium Using Catalytic Current in the Presence of Chlorate. Bulletin of Electrochemistry, 9 (1). pp. 35-37.
Basu, Bharathibai J and Rajagopalan, SR (1988) Polarographic estimation of antimony, arsenic, tin and Bismuth in lead-antimony alloys. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Basu, Bharathibai J and Rajagopalan, SR (1988) Studies on the spectrophotometric determination of molybdenum in steels by the thiocyanate method. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Behera, A and Thawre, MM and Ballal, A and Manjunatha, CM and Krishnakumar, D and Chandankhede, S (2022) A modified piecewise linear constant life diagram for fatigue life prediction of carbon fiber/polymer multidirectional laminates. Polymer Composites. ISSN 02728397
Behera, B and Borole, UP and Sivaji, A and Khan, Jakeer and Kumar, P and Ananda, CM and Barshilia, HC and Chowdhury, P and Jadhav, JJ (2021) Design and development of GMR based low range pressure sensor for medical ventilator application. Sensors and Actuators, A: Physical,, 321. ISSN 09244247
Bhagyashekar, MS and Rao, RMVGK (2007) Effects of material and test parameters on the wear behavior of particulate filled composites Part 1: SiC-epoxy and 13; Gr-epoxy composites. Journal of Reinforced Plastics and Composites, 26. pp. 1753-1768.
Bhaskaran, TA and Krishnan, RV and Srinivasa Raghavan, K (1985) Decomposition of hexagonal martensite in a titanium-copper alloy. Scripta Metallurgica, 19 (3). pp. 319-322. ISSN 0036-9748
Bhattacharya, Anup K and Bhaskaran, TA and Ramasesha, Sheela K (2002) Aluminum infiltration into Molybdenum Silicide preforms. Communications of the American Ceramic Society, 85 (9). pp. 2364-2366. ISSN 0002-7820
Bhattacharya, Partha and Suhail, Hassan and Sinha, PK (2002) Finite element analysis and distributed control13; of laminated composite shells using LQR/IMSC approach. Aerospace Science and Technology, 6. pp. 273-281.
Bhaumik, SK and Divakar, C and Rangaraj, L and Singh, AK (1998) Reaction sintering of NiAl and TiB2x2013;NiAl composites under pressure. Materials Science and Engineering A, 257 (2). pp. 341-348.
Bhaumik, SK and Divakar, C and Singh, AK (1995) Machining Ti -6AI-4V alloy with a wBN-cBN composite tool. Materials amp; Design, 16 (4). pp. 221-226.
Bhaumik, SK and Divakar, C and Singh, AK and Upadhyaya, GS (2000) Synthesis and sintering of TiB2 and TiB2x2013;TiC composite under high pressure. Materials Science and Engineering A, 279 (1-2). pp. 275-281.
Bhole, K and Balaraju, JN and Anil Kumar, A and Kempaiah, UN (2017) Evaluation of Electroless Nickel Poly alloys for Drilling of CFRP. In: Materials Today: Proceedings.
Bhovi, PM and Patil, DC and Kori, SA and Venkateswarlu, K and Huang, Y and Langdon, TG (2016) A comparison of repetitive corrugation and straightening and high-pressure torsion using an Al-Mg-Sc alloy. Journal of Materials Research and Technology, 5 (4). pp. 353-359. ISSN 22387854
Bhovi, PM and Venkateswarlu, K (2016) Influence of RCS on Al-3Mg and Al-3Mg-0.25Sc alloys. In: IOP Conference Series: Materials Science and Engineering.
Bijoysri, Khan and Rao, RMVGK and Venkataraman, N (1995) Low Velocity Impact Fatigue Studies on Glass Epoxy Composite Laminates with Varied Material and Test Parameters - Effect of Incident Energy and Fibre Volume Fraction. Journal of Reinforced Plastics and Composites, 14. pp. 1150-1159. ISSN 0731-6844
Bisht, P and Pandey, K K and Srinivas, G (2022) Optical properties of transparent wood composites prepared using transverse sections of poplar wood. Holzforschung, 76 (7). pp. 658-667. ISSN 00183830
Bisht, P and Pandey, K K and Srinivas, G (2022) Physiochemical characterization and thermal behaviour of transparent wood composite. Materials Today Communications, 31. ISSN 23524928
Bisoyi, Sanjana and Choudhury, Balamati and Jha, RM (2012) Soft Computing Techniques for Metamaterial: A Cross-indexed Bibliography (2003-2012). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Bisoyi, Sanjana and Choudhury, Balamati and Jha, RM (2012) A Cross-indexed Bibliography for Invisibility Cloak (2003-2012). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Biswas, SK and Vijayan, Kalyani (1988) Changes to near-surface region of PTFE during dry sliding against steel. Journal of Material Science, 23. pp. 1877-1885. ISSN 0022-2461
Bojja, R and Anil Chandra, AR and Jagannathan, N and Manjunatha, CM (2016) Micromechanics Modeling and Prediction of Stiffness Degradation Behavior of a Fiber Reinforced Polymer Nanocomposite Under Block Amplitude Fatigue Loads. Transactions of the Indian Institute of Metals, 69 (2). pp. 403-407. ISSN 09722815
Bonu, V and Barshilia, Harish C (2022) High-Temperature Solid Particle Erosion of Aerospace Components: Its Mitigation Using Advanced Nanostructured Coating Technologies. Coatings, 12 (12). pp. 1-38. ISSN 20796412
Bonu, V and Sahu, BK and Das, A and Amirthapandian, S and Dhara, S and Barshilia, Harish C (2019) Sub-wavelength waveguide properties of 1D and surfacefunctionalized SnO 2 nanostructures of various morphologies. Beilstein Journal of Nanotechnology, 9 (1). pp. 379-388. ISSN 21904286
Bonu, V and Srinivas, G and Praveen Kumar, V and Joseph, A and Narayana, C and Barshilia, Harish C (2022) Temperature dependent erosion and Raman analyses of arc-deposited H free thick DLC coating on Cr/CrN coated plasma nitrided steel. Surface and Coatings Technology, 436. ISSN 02578972
Borole, UP and Khan, Jakeer and Barshilia, HC and Chowdhury, P (2021) Design, fabrication, and characterization of giant magnetoresistance (GMR) based open-loop current sensor with U-shaped current carrying conductor. Sensors and Actuators A: Physical, 332. ISSN 09244247
Bose, R.S.C. and Nag, A. (2017) Defect-Associated Thermoelectric Transport Properties of Dual-Substituted CaMn1−xNbx/2Mx/2O3 (M = Mo, W; 0.02 ≤ x ≤ 0.06). Journal of Electronic Materials, 46 (11). pp. 6653-6661. ISSN 03615235
Bose, Rapaka SC and Nag, Abanti (2016) Effect of dual-doping on the thermoelectric transport properties of CaMn1-XNbx/2Tax/2O3. RSC Advances, 6 (57). pp. 52318-52325. ISSN 20462069
Chakradhar, RPS and Dinesh Kumar, V and Rao, JL and Basu, Bharathibai J (2011) Fabrication of superhydrophobic surfaces based on ZnO–PDMS nanocomposite coatings and study of its wetting behaviour. Applied Surface Science, 257 (20). pp. 8569-8575. ISSN 0042-207X
Chakradhar, RPS and Dinesh Kumar, V and Shivakumara, IS and Rao, JL and Basu, Bharathibai J (2012) Characterisation of microstructure and evaluation of optical and EPR properties of superhydrophobic copper dodecanoate films. Surface and Interface Analysis , 44 (4). pp. 412-417.
Chakradhar, R.P.S. and Prasad, G and Venkateswarlu, K and Srivastava, Meenu (2018) An Investigation on the Wear and Corrosion Behavior of HVOF-Sprayed WC-12Co-Al2O3 Cermet Coating. Journal of Materials Engineering and Performance, 27 (3). pp. 1241-1248. ISSN 10599495
Chakradhar, RPS and Chandra Mouli, G and Barshilia, Harish C and Srivastava, Meenu (2021) Improved Corrosion Protection of Magnesium Alloys AZ31B and AZ91 by Cold-Sprayed Aluminum Coatings. Journal of Thermal Spray Technology, 30. pp. 371-384. ISSN 10599630
Chaliyawala, HA and Srinivas, G and Bera, Parthasarathi and Siju, - and Kumar, P and Khan, Jakeer and Barshilia, Harish C (2016) Improved thermal stability, mechanical and tribological properties of reactively sputtered Si doped TiAlC nanostructured hard coatings. Surface and Coatings Technology, 288. pp. 95-104. ISSN 02578972
Chandarana,, M and Sateesh, V L and Sheikh, N A and Dayananda, GN (2022) Vibration Control of a Smart Composite Plate with Damaged Substrate. Journal of Vibration Engineering and Technologies, 11. pp. 435-448. ISSN 25233920
Chandra, Ramesh (1987) Current status report of Do-228 aircraft's composite rudder13; development. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Chandra, Ramesh and Viswanathan, KS and Jayasurya, M (1986) Mechanical properties of carbon epoxy composites. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Chandra, Sarath D and Rao, RMVGK and Kishore, - (1991) Effect of Sic particles on compressive strength and glass /phenolic composites fracture features of glass phenolic composites13;. Scripta Metallurgica et Materialia, Vol.25. pp. 1641-1646. ISSN 1359-6462
Chandra, Satish and Ramachandra, S and Kamath, GM and Dayanidhi, J and Petley, Vijay and Ramanaiah, B and Salem, Stanley C and Gowda, MNN and Subba Rao, M (2007) Experimental investigations on composites, fibre-metal and metal coupons for high velocity bird impacts. In: Proceedings of the National Seminar on Aerospace Structures, Sep 2007, Coimbatore, Tamil Nadu, India.
Chandraiah, M and Panda, PK (2015) Effect of SrO on piezoelectric, dielectric and ferroelectric properties of (Ba1−x Srx) (Ti0.98 Zr0.02)O3 lead free piezoceramics. Journal of Materials Science: Materials in Electronics, 26 (5). pp. 3143-3147. ISSN 09574522
Chandraiah, M and Sahoo, B and Panda, PK (2015) Effect of MgO on piezoelectric, dielectric and ferroelectric properties of (Ba1−x Mgx) (Ti0.98 Zr0.02) O3 lead-free piezoceramics. Journal of Materials Science: Materials in Electronics, 26 (9). pp. 6801-6806. ISSN 09574522
Chattopadhyay, Lalitha (2012) Analytical determination of buckling load of a delaminated plate subjected to axial compression. International Journal of Applied Mathematics and Mechanics, 8 (18). pp. 38-51. ISSN 0973-0184
Chattopadhyay, Lalitha and Jain, PK (2012) Buckling load and post-buckling solution for mode shape of delaminated beam. International Journal of Engineering and Applied Sciences, 4 (2). pp. 59-66.
Chattopadhyay, Lalitha and Murthy, Sridhara S and Mahesh, H (2008) Analytical and finite element modelling of buckling and post-buckling of delaminated opthotropic plates. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-079), 26-28 Jun 2008, Bangalore, India.
Chattopadhyay, Lalitha and Sivaranjani, T (2012) Cohesive zone model for debond failure in plated beam using transverse shear deformation theory. International Journal of Applied Mathematics and Mechanics, 8 (8). pp. 22-33. ISSN 0973-0184
Chattopadhyay, Lalitha and Sridhara Murthy, S (2011) Analytical and finite element modeling simulation of buckling and postbuckling of delaminated orthotropic plates. International Journal of Modeling, Simulation and Scientific Computing, 2 (1). pp. 97-104.
Chembath, M and Balaraju, JN and Sujata, M (2016) Effect of anodization and annealing on corrosion and biocompatibility of NiTi alloy. Surface and Coatings Technology, 302. pp. 302-309. ISSN 02578972
Chembath, M and Balaraju, JN and Sujata, M (2015) Surface characteristics, corrosion and bioactivity of chemically treated biomedical grade NiTi alloy. Materials Science and Engineering C, 56. pp. 417-425. ISSN 09284931
Chembath, M and Balaraju,, J.N and Sujata, M, M (2018) Characterization of Surface-Treated NiTi Alloy by Various Electrochemical Techniques in Phosphate-Buffered Saline. Journal of Bio- and Tribo-Corrosion, 4 (2). pp. 1-19. ISSN 21984220
Chetan S, Jarali and Raja, S and Kiefer, Bjoern (2011) Modeling the effective properties and themomechanical behavior or SMA-SMP multifunctional composite lamintes. Polymer Composites, 32 (6). pp. 910-927.
Chethana, D.M and Thanuja, TC and Mahesh, HM and Kiruba, MS and Jose, AS and Barshilia, Harish C and Manjanna, J (2021) Synthesis, structural, magnetic and NO2 gas sensing property of CuO nanoparticles. Ceramics International, 47 (7). ISSN 02728842
Chethana, DM and Thanuja, TC and Mahesh, HM and Kiruba, MS and Barshilia, HC and Yallappa, S and Manjanna, J (2021) Heterostructure Fe2O3–In2O3 Nanoparticles as Hydrogen Gas Sensor. Journal of Electronic Materials, 50 (8). pp. 4313-4323. ISSN 03615235
Chikkangoudar, RN and Jarali, CS and Raja, S and Patil, SF (2020) Consistent derivation of non-constant material function for one-dimensional shape memory alloy phenomenological model. Materials Today: Proceedings. pp. 539-545. ISSN 2214-7853
Chowdhury, SR and Kanti Bera, K and Ray, A and Bera, Parthasarathi and Maiyalagan, T and Bhattacharya, SK (2021) Synergistic catalytic activity of palladium–silver alloy nanoparticle for anodic oxidation of ethanol in alkali. International Journal of Hydrogen Energy,, 46 (27). pp. 14212-14224. ISSN 03603199
Christiyan, KGJ and Chandrasekhar, U and Venkateswarlu, K (2019) Investigation on the mechanical properties of PLA & its composite fabricated through advanced fusion plastic modelling. Journal of Mechanical Engineering Research and Developments, 42 (3). pp. 47-54. ISSN 10241752
Christiyan, KGJ and Chandrasekhar, U and Venkateswarlu, K (2016) A study on the influence of process parameters on the Mechanical Properties of 3D printed ABS composite. IOP Conference Series: Materials Science and Engineering, 114 (1). pp. 1-8. ISSN 17578981
D'sa, Florita and Shubha, V and Anil Kumar, A (2015) Resistivity measurement techniques for composite materials. International Journal of Research in Engineering and Technology, 4 (2). pp. 59-62. ISSN 2319-1163
Dan, A and Barshilia, Harish C and Basu, B (2016) Colored selective absorber coating with excellent durability. Thin Solid Films, 620. pp. 17-22. ISSN 00406090
Dan, A and Barshilia, Harish C and Chattopadhyay, K and Basu, B (2017) Solar energy absorption mediated by surface plasma polaritons in spectrally selective dielectric-metal-dielectric coatings: A critical review. Renewable and Sustainable Energy Reviews, 79. pp. 1050-1077. ISSN 13640321
Dan, A and Chattopadhyay, K and Barshilia, Harish C and Basu, B (2016) Angular solar absorptance and thermal stability of W/WAlN/WAlON/Al2O3-based solar selective absorber coating. Applied Thermal Engineering, 109. pp. 997-1002. ISSN 13594311
Dan, A and Chattopadhyay, K and Barshilia, Harish C and Basu, B (2016) Thermal stability of WAlN/WAlON/Al2O3-based solar selective absorber coating. MRS Advances, 1 (41). pp. 2807-2813.
Dan, A and Jyothi, J and Chattopadhyay, K and Barshilia, Harish C and Basu, B (2016) Spectrally selective absorber coating of WAlN/WAlON/Al2O3 for solar thermal applications. Solar Energy Materials and Solar Cells, 157. pp. 716-726. ISSN 09270248
Dan, A and Soum-Glaude, A and Carling-Plaza, A and Ho, CK and Chattopadhyay, K and Barshilia, Harish C and Basu, B (2019) Temperature- And Angle-Dependent Emissivity and Thermal Shock Resistance of the W/WAlN/WAlON/Al2O3-Based Spectrally Selective Absorber. ACS Applied Energy Materials, 2 (8). pp. 5557-5567. ISSN 25740962
Dangi, A and Biswas, A and Sarkar, A and Kashyap, S and Chattopadhyay, K and Barshilia, Harish C and Basu, B (2018) Enhancing spectrally selective response of W/WAlN/WAlON/Al2O3 – Based nanostructured multilayer absorber coating through graded optical constants. Solar Energy Materials and Solar Cells, 176. pp. 157-166. ISSN 09270248
Das, R and Joshi, SS and Barshilia, Harish C (2019) Analytical model of progression of flank wear land width in drilling. Journal of Tribology, 141 (1). pp. 1-9. ISSN 07424787
Das, S. and Halder, S. and Wang, J. and Goyat, M.S. and Anil Kumar, A. and Fang, Y (2017) Amending the thermo-mechanical response and mechanical properties of epoxy composites with silanized chopped carbon fibers. Composites Part A: Applied Science and Manufacturing, 102. pp. 347-356. ISSN 1359835X
Datta, A and Augustin, MJ and Gaddikeri, KM and Viswamurthy, SR and Gupta, N and Sundaram, R (2021) Damage detection in composite aircraft wing-like test-box using distributed fiber optic sensors. Optical Fiber Technology, 66.
Datta, A and Augustin, MJ and Gupta, N and Viswamurthy, SR and Gaddikeri, KM and Sundaram, R (2021) Strain sensor's network for low-velocity impact location estimation on carbon reinforced fiber plastic structures: Part-II. Indian Journal of Pure and Applied Physics, 59 (10). pp. 678-686.
David, T and Jyotsna Kiran, Mathad and Padmavathi, T and Vanaja, A (2014) PART-A; synthesis of polyaniline and carboxylic acid functionalized SWCNT composites for electromagnetic interference shielding coatings. Polymer, 55 (22). pp. 1-8. ISSN 0032-3861
Davis, D and Singha, Sintu and Chakradhar, RPS and Srivastava, Meenu (2020) Tribo–Mechanical Properties of HVOF-Sprayed NiMoAl-Cr2AlC Composite Coatings. Journal of Thermal Spray Technology, 29. pp. 1763-1783. ISSN 10599630
Dayananda, GN (2008) NiTi Super Elastic Shape Memory Alloys for Energy Dissipation in Smart Systems for Aerospace Applications. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, National Aerospace Laboratories.
Dayananda, GN and Kamalakannan, GM and Kumar, Senthil P and Jayasankar, S and Satisha, - (2008) A smart material based approach to morphing. In: Proceedings of the Indo-US Workshop on Micro Air Vehicles, 13-14 Nov 2008, Bangalore, India.
Dayananda, GN and Kamalakannan, GM and Senthil Kumar, P and Jayasankar, S and Satisha, - (2009) A smart material based approach to morphing. In: MAV Workshop- Challenges and Presferred Outcomes, 13 November 2008, National Aerospace Laboratories.
Dayananda, GN and Senthil Kumar, P and Ramachandra , HV and Jayasankar, S and Satisha, - (2009) Inve~tigation~oThf ermo-Mechanical Characteristics of Thin Shape Memory Alloy (Ni-Ti) Wires. Project Report. National Aerospace Laboratories, Bangalore.
Dayananda, GN and Senthil Kumar, P and Shankar, V (2003) Progress Report of the Project "Development of Mousche using SMA" for the Period January 2003 to November 2003. Project Report. National Aerospace Laboratories, Bangalore.
Dayananda, GN and Shankar, V (2003) The design of a Ni-Ti based shape memory alloy actuator. Journal of Aerspace Sciences & Technologies, 55 (4). pp. 268-274.
Dayananda, GN and Shankar, V and Gautam, RK and Senthil Kumar, P (2002) Preliminary Design Report for Automation of Hansa Flap Using SMA. Project Report. National Aerospace Laboratories, Bangalore.
Deepthi, B (2005) Development of superhard nanocomposite coatings by unbalanced magnetron sputtering process. Technical Report. National Aerospace Laboratories, Bangalore.
Deepthi, B and Devi, Mayura and Barshilia, Harish C and Rajam, KS (2010) Low friction Cr-WS2 nanocomposite coatings prepared using magnetron sputtering. In: International Conference on Surface Modification Technologies XXIII, November 2-5, 2009, GRT Temple Bay, Mamallapuram.
Deepthi, B and Srinivas, G and Praveen, Kumar and Sridhara Rao, DV and Barshilia, Harish C (2012) Sputter deposited nanostructured Au-WS2 solid lubricant coatings. Nanoscience and Nanotechnology letters, 4 (1). pp. 53-60. ISSN 1941-4900
Dhanush, S and Sreejesh, M and Bindu, K and Chowdhury, P and Nagaraja, HS (2018) Synthesis and electrochemical properties of silver dendrites and silver dendrites/rGO composite for applications in paracetamol sensing. Materials Research Bulletin, 100. pp. 295-301. ISSN 00255408
Divakar, C and Bhaumik, SK and Singh, AK (1994) High pressure-High temperature processing and performance of wBN-cBN composite tools. In: Proceedings of the National Conference on High Pressure Science and Technology, 10-11 Oct 1994, Bangalore, India.
Divakar, C and Bhaumik, SK and Singh, AK (1993) A Preliminary report on the field trials and market survey of composite tools based on boron nitride. Technical Report. National Aerospace Laboratories, Bangalore, India.
Divakar, C and Mohan, Murali and Jaman, PM and Singh, AK (1978) Pressure and temperature calibration of the cubic press. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Dominic, J and David, T and Vanaja, A and Satheesh Kumar, KK (2016) Effect of LiCl on conductivity of polyaniline synthesized via in-situ chemical oxidative method. European Polymer Journal, 85. pp. 236-243. ISSN 00143057
Driscoll, Stephen Burke and Rao, RMVGK (1989) Rheological Properties and Impact Behavior Multi-component Thermoplastic Composites. In: 5th Annual ASM/ESD Advanced Composites Conference, 26 Sept 1989, Dearborn.
Duffy, TS and Shen, Guoyin and Shu, Jinfu and Mao, HK and Hemley, RJ and Singh, AK (1999) Elasticity, shear strength, and equation of state of molybdenum and gold from x-ray diffraction under nonhydrostatic compression to 24 GPa. Journal of Applied Physics, 86 (12). pp. 6729-6736.
Durai, Thulasi D and Venkatesh, S and Varughese, Byji and Ramanaiah, B and Dayananda, GN (2008) Concepts for truss based aerofoil construction. In: ISAMPE National Conference on Composites : INCCOM-7, 4-5 Dec 2008, Bangalore, India.
Dutt, HNV and Rajeswari, B (1986) Constant source panel method for analysis of potential flow over Arbitrary bodies. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Dutta, Soma and Jeyaseelan, Antony and Sabina, JEJ and Guddadam, M and Shubha, V (2010) Acousto ultrasonic method for structural health monitoring using insitu Piezoelectric Coating. Project Report. National Aerospace Laboratories, Bangalore, India.
Dutta, Soma and Shubha, V (2010) Non destructive acousto ultrasonic Method for structural health monitoring --- A review. Project Report. National Aerospace Laboratories, Bangalore, India.
Dwarakanath, K and Dattaguru, B and Dash, PK and Viswnath, S and Murthy, CRL (2001) Stress intensity factors for cracks emanating from a pin-loaded lug. 13; 13;. In: 2nd International Conference on Theoretical, Applied, Computational and Experimental Mechanics, 27-30 Dec 2001, Kharagpur, India.
Esther, ACM and Dey, A and Sridhara, N and Yougandar, B and Bera, Parthasarathi and Anandan, C and Rangappa, D and Sharma, AK (2015) A study on degradation of germanium coating on Kapton used for spacecraft sunshield application. Surface and Interface Analysis, 47 (13). pp. 1155-1160. ISSN 01422421
Ezhil Selvi, V and Mimosa, Sarma and Balaraju, JN (2013) Electroless nickel composite coatings containing solid lubricant MoS2 particles. In: NSEST 2013, 2013-08-23, IISc, Bangalore.
Ezhil Selvi, V and Parthasarathi , Bera and Anandan, C (2014) Corrosion behavior of Co-P coatings electrodeposited from chloride bath. In: International Conference on Electrochemical Science and Technology, 07 Aug 2014, Bangalore.
Ezhil Selvi, V and Nithin, J and Balaraju, JN and Subramanian, S (2016) The influence of current density on the morphology and corrosion properties of MAO coatings on AZ31B magnesium alloy. Surface and Coatings Technology, 288. pp. 221-229. ISSN 02578972
Farook, MA and Ramanaiah, B and Gopalan, R (1990) Static testing of DO-228 Composite rudder - a preliminary report. Project Report. National Aerospace Laboratories, Bangalore.
Galindo, RE and Krause, M and Niranjan, K and Barshilia, Harish C (2021) Solar selective coatings and materials for high-temperature solar thermal applications. In: Sustainable Material Solutions for Solar Energy Technologies: Processing Techniques and Applications. Elsevier, pp. 383-427. ISBN 9780128215920
Ganguli, Ranjan and Thakkar, D and Viswamurthy, SR (2016) Active flap controller evaluation. Springer International Publishing, pp. 103-111.
Ganguli, Ranjan and Thakkar, D and Viswamurthy, SR (2016) Airfoil-section rotor blades. Advances in Industrial Control. pp. 189-219. ISSN 14309491
Ganguli, Ranjan and Thakkar, D and Viswamurthy, SR (2016) Preliminary studies with active flaps. Advances in Industrial Control. pp. 71-80. ISSN 14309491
Ganguli, Ranjan and Thakkar, D and Viswamurthy, SR (2016) Trailing-edge flap placement. Advances in Industrial Control. pp. 113-127. ISSN 14309491
George, S and Goravar, S and Mishra, D and Shyamsunder, MT and Sharma, P and Padmasree, GK and Sanjeev Kumar, S and Bremond, P and Mukherjee, K (2010) Stress monitoring and analysis using lock-in thermography. Insight - Non-Destructive Testing and Condition Monitoring, 52 (9). 470-474(5). ISSN 1354-2575
Ghorai, K and Bhattacharjee, M and Mandal, D and Hossain, A and Bhunia, T and Das, M and Ray, PP and Bera, Parthasarathi and Mandal, TK and Seikh, MM and Gayen, A (2021) Facile synthesis of CuCr2O4/BiOBr nanocomposite and its photocatalytic activity towards RhB and tetracycline hydrochloride degradation under household visible LED light irradiation. Journal of Alloys and Compounds, 867. ISSN 09258388
Ghorai, K and Panda, A and Bhattacharjee, M and Mandal, D and Hossain, A and Bera, Parthasarathi and Seikh, MM and Gayen, A (2021) Facile synthesis of CuCr2O4/CeO2 nanocomposite: A new Fenton like catalyst with domestic LED light assisted improved photocatalytic activity for the degradation of RhB, MB and MO dyes. Applied Surface Science, 536. ISSN 01694332
Ghorai, K and Panda, A and Hossain, A and Bhattacharjee, M and Chakraborty, M and Bhattacharya, S K and Show, B and Sarkar, A and Bera, Parthasarathi and Kim, H and Seikh, M M (2022) LaNiO3/g-C3N4 nanocomposite: An efficient Z-scheme photocatalyst for wastewater treatment using direct sunlight. Journal of Rare Earths, 40 (5). pp. 725-736. ISSN 10020721
Ghorai, K and Panda, A and Hossain, A and Bhattacharjee, M and Chakraborty, M and Bhattacharya, SK and Bera, Parthasarathi and Kim, H and Seikh, MM and Gayen, A (2021) Anatase TiO2 decorated CuCr2O4 nanocomposite: A versatile photocatalyst under domestic LED light irradiation. Applied Surface Science, 568. ISSN 0169-4332
Ghosh, SK and Dogra, A and Chowdhury, P and Rajak, S and Srivastava, C (2015) Low temperature effect on magnetic conversion and giant magnetoresistance in electrodeposited CoCu/Cu multilayers. Journal of Alloys and Compounds, 647. pp. 1098-1103. ISSN 09258388
Giridhar, A and Mahadevan, Sudha (1999) Electrical conductivity of Cu,(As0.4Se0.3Te0.3)100-x Glasses. Technical Report. National Aerospace Laboratories, Bangalore,India.
Giridhar, A and Mahadevan, Sudha (1999) Mean Atomic Volume and Tg of CUx(AS0.4Se0.2Te0.4)100-x Glasses. Technical Report. National Aerospace Laboratories, Bangalore,India.
Giridhar, A and Narasimham, PSL and Mahadevan, Sudha and Singh, AK (1984) Dilatometric measurements on solids. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Giridhar, J and Kishore, - and Rao, RMVGK (1986) Moisture Absorption Characteristics of Natural Fibre Composites. Journal of Reinforced Plastics and Composites, 5. pp. 141-150. ISSN 0731-6844
Gnanavel, S and Ponnusamy, S and Mohan, L and Radhika, R and Muthamizhchelvan, C and Ramasubramanian, K (2018) Electrochemical Behavior of Biomedical Titanium Alloys Coated with Diamond Carbon in Hanks’ Solution. Journal of Materials Engineering and Performance, 27 (4). pp. 1635-1641. ISSN 10599495
Gopalakrishnan, PS and Lakshminarasimham, PS (1998) Synthesis of Silicon Nitride and Related Materials. Technical Report. National Aerospace Laboratories, Bangalore, India.
Gopalakrishnan, PS and Narasimham, PSL (1987) Studies on high-Tc superconducting materials. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Gopalan, R and Dattaguru, B (1989) Effects of hygrothermal on the mechanical properties of advanced fibre hybrid composites. In: 7th International Conference on Composite Materials, Nov 1989, Guanghou, China.
Gopalan, R and Farook, MA and Ramanaiah, B (1990) Static testing of DO-228 composite rudder. Project Report. National Aerospace Laboratories, Bangalore.
Gopalan, R and Murthy, MVV (1985) Diffusion studies on advanced fibre hybrid composites. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Gopalan, R and Ramanaiah, B and Sonewane, Jayant (1989) Static testing of composite rudder of a military aircraft. Project Report. National Aerospace Laboratories, Bangalore.
Gopalan, R and Rao, RMVGK and Murthy, MVV and Dattaguru, B (1986) Diffusion studies on advanced fibre hybrid composites. Journal of Reinforced Plastics and Composites, 5 (1). pp. 51-61. ISSN 0731-6844
Gopi, B and Nagakrishna, N and Sivaprasad, K and Venkateswarlu, K (2012) Effect of rolling temperature on microstructure and mechanical Properties of cryorolled Al-Mg-Si Alloy Reinforced with 3wt% TiB2 in-situ Composite. Advanced Materials Research, 584. pp. 556-560.
Govindan, Kutty M and Saravana, Kumar N and Lohith, N and Sudheendra, HN and Subbarao, M (2009) Master process sheets for fabrication of CFC centre fuselage parts for TEJAS (Light Combat Aircraft). Technical Report. NAL.
Govindan, Kutty M and Saravana, Kumar N and Ramesh, Sundaram and Sudheendra, HN and Subbarao, M (2009) Master process sheets for fabrication of CFC centre fuselage parts for TEJAS (Light Combat Aircraft) - part-4. Technical Report. NAL.
Govindaraj, Y and Venkatachalam, D and Prabhakaran, M and Manikandanath, NT and Balaraju, JN and Rohwerder, M and Neelakantan, L (2022) Nano-sized cerium vanadium oxide as corrosion inhibitor: A microstructural and release study. Electrochimica Acta, 425. ISSN 00134686
Gupta, Nitesh and Augustin, MJ and Sakthi Sathya, P S and Saransh, Jain and Viswamurthy , SR and Gaddikeri, KM and Ramesh, Sundaram (2013) Structural Health Monitoring of Composite Aircraft Structures Using Fiber Bragg Grating Sensors. Journal of the Indian Institute of Science, 93 (4). pp. 735-750. ISSN 0970-4140
Gupta, Nitesh and Sundaram, Ramesh (2007) Optical flow sensors for verity process. In: 2nd ISSS National Conference on MEMS, Microsensors, Smart Materials, Structures and Systems, Nov 2007, Pilani, India.
Guruprasad, K and Subba Rao, M and Chandra, Ramesh (1986) Finite element analysis of composite rudder for DO 228 aircraft. Technical Report. National Aerospace Laboratory, Bangalore, India.
Harish, DVN and Bharatish, A and Narasimha Murthy, HN and Anand, B and Rangaraj, L (2019) Evaluation of nanosecond laser ablation and scratch resistance of tantalum carbide coated graphite substrates. Ceramics International, 45 (17). pp. 22578-22588. ISSN 02728842
Haritha, A H and Ramachandra Rao, R (2019) Sol-Gel synthesis and phase evolution studies of yttrium silicates. Ceramics International, 45 (18). pp. 24957-24964.
Hasan, MA and Gupta, AK and Bera, Parthasarathi and Dey, A and Bhavanisankar, P Y and Kumar, D R and Saha, S and Sridhara, N and Rajendra, A and Datta, S (2022) Electronic, nanomechanical and smart reversible phase transition behaviours of sputtered titanium oxide-vanadium oxide composite thin films. Ceramics International, 48 (23). pp. 35937-35946. ISSN 02728842
Hegde, MS and Bera, Parthasarathi (2015) Noble metal ion substituted CeO2 catalysts: Electronic interaction between noble metal ions and CeO2 lattice. Catalysis Today, 253. pp. 40-50. ISSN 09205861
Heleena, M and Kumar, S S and Balaji, N and Aruna, S T (2022) Solution combustion synthesized micron sized yttrium aluminum garnet (Y3Al5O12) powder: A promising feedstock source for plasma spraying. Ceramics International, 48 (23). pp. 35740-35749. ISSN 02728842
Himabindu, NG and Vinoy, KJ and Jha, RM (1995) Profile of Radome Materials. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Hiremath, C and Senthilnathan, K and Guha, A and Tewari, A (2015) Effect of Volume Fraction on Damage Accumulation for a Lattice Arrangement of Fibers in CFRP. Materials Today: Proceedings, 2 (4-5). pp. 2671-2678. ISSN 22147853
Hiremath, C.P. and Senthilnathan, K. and Naik, N.K. and Guha, A. and Tewari, A. (2018) Microstructural damage based micromechanics model to predict stiffness reduction in damaged unidirectional composites. Journal of Reinforced Plastics and Composites. ISSN 07316844
Hiremath, C.P. and Senthilnathan, K. and Naik, N.K. and Guha, A. and Tewari, A. (2018) Microstructural damage based modeling of thermal conductivity of cyclically loaded CFRP. Composites Science and Technology, 154. pp. 37-44. ISSN 02663538
Hiremath, CP and Senthilnathan, K and Naik, KK and Guha, A and Tewari, A (2018) Numerical Study and Experimental Validation of Effect of Varying Fiber Crack Density on Stiffness Reduction in CFRP Composites. Journal of Materials Engineering and Performance, 27 (4). pp. 1685-1693. ISSN 10599495
Hiremath, P and Viswamurthy, S R and Shettar, M and Naik, N and Kowshik, S (2022) Damage Tolerance of a Stiffened Composite Panel with an Access Cutout under Fatigue Loading and Validation Using FEM Analysis and Digital Image Correlation. Fibers, 10 (12). pp. 1-18. ISSN 20796439
Hussain, MS and Anilchandra, AR and Jagannathan, N and Manjunatha, CM (2016) Fatigue life prediction of a unidirectional carbon fiber composite under off-axis spectrum loads using 3D constant life diagram. Materials Performance and Characterization, 5 (1). pp. 132-147. ISSN 21653992
Iyer, RV and Sooryanarayana, K and Row, TNG and Vijayan, Kalyani (2003) Low temperature crystallographic data on Kevlar 49 fibres. Journal of Material Science, 38. pp. 133-139. ISSN 0022-2461
Iyer, RV and Vijayan, Kalyani (1995) Axial Compression of Kevlar Fibres by Ultrasonic Agitation. Technical Report. National Aerospace Laboratories, Bangalore, India.
Iyer, RV and Vijayan, Kalyani (1997) Effect of Thermal Pulses on Kevlar Fibres. Technical Report. National Aerospace Laboratories, Bangalore, India.
Iyer, RV and Vijayan, Kalyani (2000) Effect of thermal spikes on the structural characteristics of Kevlar fibres. Journal of Materials Science, 35 (22). pp. 5731-5739. ISSN 0022-2461
Iyer, RV and Vijayan, Kalyani (1998) Identification of a New Parameter o t (T;, Controlling13; the Thermally Induced Effects on Keviar 49 Fibres. Technical Report. National Aerospace Laboratories, Bangalore, India.
Iyer, RV and Vijayan, Kalyani (1997) Study of the ecomposition Behavior of KEVLAR Fibres-Part 1. At Temperatures 5001C. Technical Report. National Aerospace Laboratories, Bangalore, India.
Iyer, RV and Vijayan, Kalyani (1993) X-ray analysis of the thermal decomposition behaviour of Kevlar fibres. Technical Report. National Aerospace Laboratories, Bangalore, India.
Jadhav, M and Singh, S and Srivastava, Meenu and Chethan, - and Chakradhar, RPS and Panigrahi, BB (2022) Effect of minute element addition on the oxidation resistance of FeCoCrNiAl and FeCoCrNi2Al high entropy alloy. Advanced Powder Technology, 33 (2). ISSN 09218831
Jagannathan, N and Chandra, Anil AR and Manjunatha, CM (2015) Onset-of-growth behavior of mode II delamination in a carbon fiber composite under spectrum fatigue loads. Composite Structures, 132. pp. 477-483. ISSN 1879-1085
Jagannathan, N and Anilchandra, AR and Manjunatha, CM (2015) Influence of micro and nano particulate fillers on the fatigue crack growth rate of an epoxy polymer. Journal of Aerospace Sciences & Technologies, 67 (2B). pp. 317-323.
Jagannathan, N and Anilchandra, AR and Manjunatha, CM (2015) A study on the fatigue performance of a glass fiber-epoxy polymer nanocomposite under random loads. Nanocomposites, 1 (3). pp. 138-144. ISSN 2055-0324
Jagannathan, N and Bojja, R and Manjunatha, CM and Taylor, AC and Kinloch, AJ (2013) Fatigue Behavior of a Hybrid Particle Modified Fiberglass/epoxy Composite Under a Helicopter Spectrum Load Sequence. Advanced Composites Letters, 22 (3). pp. 52-56. ISSN 0963-6935
Jagannathan, N and Bojja, R and Revathi, A and Srihari, Shylaja and Manjunatha, CM (2015) Mechanical Properties of a Hybrid Nanocomposite Under Room Temperature and Hot-Wet Environments. Transactions of the Indian Institute of Metals, 68 (3). pp. 363-369. ISSN 09722815
Jagannathan, N and Gururaja, S and Manjunatha, CM (2019) Matrix cracking in polymer matrix composites under bi-axial loading. In: 2nd International Conference on Structural Integrity and Exhibition 2018.
Jagannathan, N and Gururaja, S and Manjunatha, CM (2016) Probabilistic strength based matrix crack evolution in multi-directional composite laminates. Composites Part B: Engineering, 87. pp. 263-273. ISSN 13598368
Jagannathan, N and Gururaja, S and Manjunatha, CM (2018) Probabilistic strength based matrix crack evolution model in multi directional composite laminates under fatigue loading. International Journal of Fatigue, 117. pp. 135-147.
Jagannathan, N. and Gururaja, S. and Manjunatha, CM (2017) Matrix crack evolution in multi-directional composite laminates considering thickness effects. Advanced Composite Materials. pp. 1-19. ISSN 09243046
Jain, Anjana and Vijayan, Kalyani (1997) Effect of Some Liquid Penetrants on NOME.-. Technical Report. National Aerospace Laboratories, Bangalore, India.
Jain, Nikhil (2005) EM Design and Applications of Metamaterials. Technical Report. National Aerospace Laboratories, Bangalore.
Jain, Nikhil and Jha, RM (2005) Applications of Metamaterials. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Jain, Nikhil and Jha, RM (2005) Emergence and Structure of Metamaterials. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Jain, Saransh and Augustin, MJ and Kundan , K Verma and Gupta, Nitesh and Sundaram, Ramesh and Hariprasad, M and Pillai, ACR (2015) Flight Data Analyses of Fiber Optic Based Airworthy Structural Health Monitoring System for UAV using Artificial Neural Networks. Journal of Unmanned Systems Technology, 3 (1). pp. 1-11. ISSN 2287-7320
Jain, Saransh and Viswamurthy , SR and Gupta, Nitesh (2012) Debond Detection and Load Estimation Using Fiber Bragg Grating Sensors on a Composite Test Box – Part II (Algorithm Development). In: International Conference on Smart Materials Structures and Systems, 4-7 January 2012, Indian Institute of Science, Bangalore.
Jain, Anjana and Minajagi, S and Dange, E and Bhover, SU and Dharanendra, YT (2021) Impact and acoustic emission performance of polyvinylidene fluoride sensor embedded in glass fiber-reinforced polymer composite structure. Polymers and Polymer Composites, 29 (5). pp. 354-361. ISSN 09673911
Jalaja, M.A and Dutta, S (2020) Transport properties of AgPb16SbTe18 prepared by the inclusion of nano AgSbTe2 into PbTe matrix. Journal of Materials Science: Materials in Electronics,, 31. pp. 517381-17385. ISSN 09574522
Jalaja, MA and Dutta, Soma (2019) Optically controlled polarization, photovoltaic and switchable diode behavior in multifunctional KBiFe2O5 composite film. Ceramics International, 45 (17). pp. 22553-22557. ISSN 02728842
James, P and Kotresh, Gaddikeri M and Murali Krishna, D and Ramanaiah, B and Varughese, Byji and Subba Rao, M (2008) Design of spar slice joints in composite wing structures. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-044), 26-28 Jun 2008, Bangalore, India.
James, P and Suresh, S and Banker, Manisha M and Varughese, Byji and Sundaram, Ramesh (2017) SAGAR PLot: Imitating River Meandering to Identify the Stringer Cutout Shape for Reduced Peel Load in Composite Co-cured Joint. In: Materials Today: Proceedings.
Jangam, S and Raja, S and Maheswar Gowd, BU (2016) Influence of multiwall carbon nanotube alignment on vibration damping of nanocomposites. Journal of Reinforced Plastics and Composites, 35 (8). pp. 617-627. ISSN 07316844
Jangam, S. and Hema Devi, A. and Raja, S. and Hemachandra Reddy, K. and Vijay Kumar, G. (2018) The tensile fatigue behaviour of aligned MWNT/epoxy nanocomposites. Lecture Notes in Mechanical Engineering. pp. 351-359. ISSN 21954356
Jangam, S. and Reddy, K.H. and Raja, S. (2018) Fabrication & Characterization of Hybrid fibers and Hybrid Fiber reinforced composites - A Novel Approach}. In: Materials Today: Proceedings.
Jarali, Chetan S and Raja, S (2008) Homogenization and pseudoelastic behavior of composite materials reinforced with shape memory alloy fibers. Journal of Composite Materials, 42 (17). pp. 1685-1707. ISSN 0021-9983
Jarali, Chetan S and Raja, S and Upadhya, AR (2008) Micro-mechanical behaviors of SMA composite materials under hygro-thermo-elastic strain fields. International Journal of Solids and Structures, 45. p. 4347. ISSN 0020-7683
Jarali, C.S and Chikkangoudar, R.N and Patil, S.F and Raja, S and Charles Lu, Y and Fish, J (2020) Derivation of compatibility conditions and nonconstant material function for one-dimensional constitutive relations of shape memory alloys. International Journal for Multiscale Computational Engineering, 18 (3). pp. 385-407. ISSN 15431649
Jarali, Chetan S and Chikkangoudar, RN and Patil, SF and Raja, S and Lu, YC and Fish, J (2019) Thermodynamically consistent approach for one-dimensional phenomenological modeling of shape memory alloys. International Journal for Multiscale Computational Engineering, 17 (4). pp. 429-446. ISSN 15431649
Jarali, Chetan S and Madhusudan, M and Vidyashankar, S and Charles, Lu Y (2017) Modelling of the interfacial damping due to nanotube agglomerations in nanocomposites. Smart Structures and Systems, 19 (1). pp. 57-66. ISSN 17381584
Jarali, Chetan S and Patil, SF and Pilli, SC (2015) Hygro-thermo-electric properties of carbon nanotube epoxy nanocomposites with agglomeration effects. Mechanics of Advanced Materials and Structures, 22 (6). pp. 428-439. ISSN 15376494
Jatratkar, AA and Yadav, JB and Kamat, SV and Patil, VS and Mahadik, DB and Barshilia, Harish C and Puri, V and Puri, RK (2015) Consequence of oxidant to monomer ratio on optical and structural properties of Polypyrrole thin film deposited by oxidation polymerization technique. Journal of Physics and Chemistry of Solids, 80. pp. 78-83. ISSN 00223697
Javagal, S and Raju, J and Venkataramana, K (2019) A comparative study of the behavior of CFRP and GFRP laminates in a plate specimen using modified virtual crack closure technique (MVCCT). In: 2nd International Conference on Structural Integrity and Exhibition 2018.
Jaya Christiyan, KG and Chandrasekhar, U and Rajesh Mathivanan, N and Venkateswarlu, K (2018) Influence of manufacturing parameters on the strength of PLA parts using Layered Manufacturing technique: A statistical approach. In: International Conference on Advances in Materials and Manufacturing Applications (IConAMMA-2017) , Bengaluru, India, 17–19 August 2017, Bengaluru.
Jayasankar, S and Dayananda, GN and Sandeep, CD and Subba Rao, M (2006) Preliminary Hesign and Fabrication - :a1 of SMA Embedded GFRP Beam . Project Report. National Aerospace Laboratories, Bangalore.
Jayasankar, S and Dayananda, GN and Senthil Kumar, P and Subba Rao, M (2007) tvaluation of Properties of SMA and SMA Embedded 3t.c-1,{*. FRP Beams. Project Report. National Aerospace Laboratories, Bangalore.
Jayasankar, S and Dayananda, GN and Subbarao, M (2007) Hybrid Composites for Morphing Applications. In: 15th National Conference on Aerospace Structures, 15-16 Oct 2007, Coimbatore, Tamil Nadu, India.
Jayasankar, S and Senthil Kumar, P and Kamaleshaiah, MS and Satisha, - and Prashanth, NS and Sateesh, VL and Alfred Paul, Singh and Gangadhar, S and Dayananda, GN (2010) Development of SMA Based Smart Trimming Surface for Typical Civil Aircraft Applications. Project Report. National Aerospace Laboratories, Bangalore.
Jayasankar, S and Senthil Kumar, P and Varghese, B and Ramanaiah, B (2011) Smart Aerodynamic Surface for a Typical Military Aircraft Using Shape Memory Elements. Journal of Aircraft, 48 (6). pp. 1968-1978. ISSN 0021-8669
Jayasurya, M and Viswanathan, KS and Subba Rao, M (1990) Fabrication of composite wing box for lightning studies. Project Report. National Aerospace Laboratories, Bangalore.
Jayatheertha, C and Viswanath, S (1992) Static buckling and free vibration analysis of composite/ sandwich plates using improved transverse shear stiffness. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Jerald Maria Antony, G and Sanjeeth Kevin, R and Jarali, C S and Samikkannu, R and Lu, YC (2022) A novel shape memory polymer composites with grafted hydroxyapatite nanoparticles for high strength and stiffness applications. Polymer Composites, 43 (6). pp. 3585-3597. ISSN 02728397
Jeyaseelan, A.A. and Bhuvana, N. and Durai, D.T. and Dutta, S. Smart Piezo-ceramic Coating for Multifunctional Applications. In: Materials Today: Proceedings.
Jyothi, J and Chaliyawala, H and Srinivas, G and Nagaraja, HS and Barshilia, Harish C (2015) Design and fabrication of spectrally selective TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO tandem absorber for higherature solar thermal power applications. Solar Energy Materials and Solar Cells, 140. pp. 209-216. ISSN 09270248
Jyothi, J and Latha, S and Bera, Parthasarathi and Nagaraja, HS and Barshilia, Harish C (2016) Optimization of process parameters to achieve spectrally selective TiAlC/TiAlCN/TiAlSiCN/TiAlSiCO/TiAlSiO high temperature solar absorber coating. Solar Energy, 139. pp. 58-67. ISSN 0038092X
Jyothi, J and Nagaraja, HS and Barshilia, Harish C (2017) Effect of Composition on Designed Tandem Absorber to Achieve Selective Properties for High Temperature Solar Thermal Applications. In: Materials Today: Proceedings.
Jyotsna Kiran, Mathad (2011) Studies on conductive polymer composites for advanced aerospace applications. ["eprint_fieldopt_thesis_type_phd" not defined] thesis, University of Mysore.
Kalyanam, M and Rajagopalan, SR (1988) Emission spectrochemical analysis of ferrous materials using Liquid-in-layer spark technique. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Kamalakannan, GM (2007) Ethernet based online process monitoring and controlling of a plant having RS-232 or RS-485 equipment. In: National symposium on Instrumentation – 2007, 2007, Tiruchengode, Tamil Nadu, India.
Kamalakannan, GM and Gupta, Amit Kumar (2009) An improved technique and its implementation for control of high power heaters in large autoclaves and similar plants. In: International Conference of Instrumentation, ICI-2009, 2009, Pune, India.
Kamalakannan, GM and Gupta, Amit Kumar (2010) An improved technique and its implementation for control of high power heaters in large autoclaves and similar plants. Journal of Instrument Society of India, 40 (2).
Kamalakannan, GM and Subba Rao, M (2006) Design and development of cure controller for bonded repair of aircraft structures13; 13;. Technical Report. National Aerospace Laboratories, Bangalore, India.
Kamalakannan, GM and Subba Rao, M (2004) Development of a computer based process control system for an autoclave to cure polymer matrix composites. In: Proceedings of International conference on Instrumentation, 2004, Pune, India.
Kamalakannan, GM and Singh, GK and Ananda, CM (2019) Influence of thermal insulation and wind velocity on the SMA actuator for morphing applications. Journal of Mechanical Science and Technology, 33 (9). pp. 4459-4468. ISSN 1738494X
Kamath, GM and Ramanaiah, B and Verma, KK and Subba Rao, M (2007) Static Environmental Testing of a Cocured Aircraft Wing Test Box. In: 15th National Conference on Aerospace Structures, 15-16 Oct 2007, Coimbatore, Tamil Nadu, India.
Kamath, GM and Ramanaiah, B and Verma, KK and Subba Rao, M (2007) Static environmental testing of a co-cured aircraft wing test box. In: Proceedings of the National Seminar on Aerospace Structures, Sep 2007, Coimbatore, Tamil Nadu, India.
Kamath, GM and Sundaram, Ramesh and Gupta, Nitesh and Rao, Subba M (2010) Damage studies in composite structures for structural health monitoring using strain sensors. Structural Health Monitoring, 9 (6). pp. 497-512. ISSN 14759217
Kamath, GM and Sundaram, Ramesh and Gupta, Nitesh and Subbarao, M (2007) Health monitoring of composites aircraft structures using fibre optic sensors: Some issues and challenges. In: Proceedings of the National Seminar on Aerospace Structures, 15-16 Oct 2007, BITS, Pilani.
Kamath, BS and Anilchandra, AR and Sivaranjani, T and Narayana, BK (2020) Fatigue Crack Growth Prediction under Spectrum Load in an Aluminium Alloy using Crack Driving Force K*eff Approach. International Journal of Vehicle Structures & Systems, 12 (3). pp. 358-362. ISSN 0975-3060
Kanakalatha, P and Sridhar, MK and Ajay, Chandra and Balasingh, C and Singh, AK (1990) Preparation and characterization of aluminium alloy sheet aramid fibre-laminated composites. Bulletin of Material Science, 10. pp. 305-311.
Kannan, R and Rajagopalan, SR (1988) An enhancement method for the polarographic13; determination of trace amounts of arsenic. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Kannan, R and Rajagopalan, SR (1988) An indirect amplification method for the determination of trace13; amounts of germanium. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Kannan, Sayee and Dubey, Satya Kesh and Jha , RM (2012) Retrieval of EM Parameters from Multi-layer Composite Material. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Kannan, R and Rangaraj, L (2020) Densification, mechanical, and tribological properties of ZrB2-ZrCx composites produced by reactive hot pressing. Journal of the American Ceramic Society, 103 (11). pp. 6120-6135. ISSN 00027820
Kannan, R and Rangaraj, L and Jayaram, V (2021) Reactive hot pressing of TiC0.5 ceramic at low applied pressure with 1 wt% Ni additive. Journal of the American Ceramic Society, 104 (11). pp. 5461-5466.
Karadan, P and John, S and Anappara, AA and Narayana, C and Barshilia, Harish C (2016) Evolution mechanism of mesoporous silicon nanopillars grown by metal-assisted chemical etching and nanosphere lithography: correlation of Raman spectra and red photoluminescence. Applied Physics A: Materials Science and Processing, 122 (7). ISSN 09478396
Karadan, P. and Parida, S. and Kumar, A. and Anappara, A.A. and Dhara, S. and Barshilia, H.C. (2017) Charge transport studies on Si nanopillars for photodetectors fabricated using vapor phase metal-assisted chemical etching. Applied Physics A: Materials Science and Processing, 123 (11). ISSN 09478396
Karthikeyan, S and Judia Magthalin, C and Mahesh, M and Anandan, C and Sekaran, G (2015) Synthesis of reactive iron impregnated nanoporous activated carbon and its application in anaerobic biological treatment to enhance biodegradability of ortho-phenylenediamine. Journal of Chemical Technology and Biotechnology, 90 (6). pp. 1013-1026. ISSN 02682575
Karuppannan, D and Rawat, RS and Ramachandra, HV and Saji, D and Byji, Varughese (2013) Composite for reinforcement of damaged metallic aircraft wings. Journal of Aerospace Sciences and Technology, 65 (1). pp. 8-13. ISSN 0972-950X
Kashyap, A and Harsha, A P and Kondaiah, P and Barshilia, H C (2022) Study on galling behaviour of HiPIMS deposited Mo/DLC multilayer coatings at ambient and elevated temperature. Wear, 498. ISSN 00431648
Kataria, S and Barshilia, Harish C and Praveen, Kumar and Srinivas, G and Siju, John and Jakeer, Khan (2011) Hard yet tough Ti-TiN nanocomposite coatings. Technical Report. National Aerospace Laboratories, National Aerospace Laboratories.
Kataria, S and Praveen, Kumar and Jakeer, Khan and Barshilia, Harish C (2011) Tailoring H/E ratio of Ti-TiN nano-composite coatings with improved toughness for tribological applications. In: The International Symposium on Surface Protective Coatings and Indo-German Conference on Surface Engineering, December 7, 2011, Hotel Sheraton, Bangalore . (Unpublished)
Kavathia, M and Settipalli, M and Raja, S (2017) Active-passive damping characteristics of extension and shear mode piezoelectric fiber nano reinforced composite (PFNRC). In: ASME 2017 Conference on Smart Materials, Adaptive Structures and Intelligent Systems, SMASIS 2017, 18 - 20 December 2017, Snowbird, Utah, USA.
Kavitha, and Revathi, A and Sandhya, Rao and Srihari, Shylaja and Dayananda, GN (2012) Characterization of shape memory behavior of CTBN-epoxy resin system. Journal of Polymer Research, 19. pp. 1-7.
KavithaMol , S and Stanley , C Salem (2011) Parametric Studies on Bird Impact Behavior of Aircraft Leading Edges. Masters thesis, National Aerospace Laboratories, Bangalore.
Khedhar, S and Ramji, M and Chinthapenta, V and Manjunatha, CM (2015) Progressive damage study in an adhesively bonded patch repaired open hole cfrp panel under compressive loading. Journal of Aerospace science and Technologies, 67 (2B). pp. 299-308.
Kishore, R. Mohan and Shridhar, MK and Rao, RMVGK (1983) xFEFF;Compressive strength of jute-glass hybrid fibre composites 13;. Journal of Material Science Letters, 2. pp. 99-102. ISSN 0261-8028
Kmet, Brigita and Kuscer, Danjela and Dutta, Soma and Ursic, Hana and Matavz, Aleksande and Levassort, Franck and Bobnar, Vid and Malic, Barbara and Bencan, Andreja (2021) Screen printed copper and tantalum modified potassium sodium niobate thick films on platinized alumina substrates. Materials, 14 (23). pp. 1-13. ISSN 19961944
Kondaiah, P and Niranjan, K and John, S and Barshilia, Harish C (2019) Tantalum carbide based spectrally selective coatings for solar thermal absorber applications. Solar Energy Materials and Solar Cells, 198. pp. 26-34. ISSN 09270248
Kondaiah, P and Niranjan, K and Kavan, S and Barshilia, Harish C (2022) Fabrication of spectrally selective tandem stack of HfZrC/HfZrCN/HfZrON/HfZrO by reactive magnetron sputtering for CSP applications. Solar Energy, 232. pp. 73-83. ISSN 0038092X
Krishnan, M and Predeep, P and Barshilia, Harish C and Chowdhury, P (2013) High Thermal Stability of CoFe/Cu GMR Multilayer stack for Automobile Application. In: IUMRS ICA-2013, 16 Dec 2013, IISc, Bangalore.
Krishnan, G S and Thomas, P and Naveen, S (2022) The influences of polymerization conditions on thermal and structural properties of carbon fiber precursor polymers. Chemical Papers, 76 (3). pp. 1607-1620. ISSN 03666352
Krishnan, GS and Naveen, S and Shahnawaz, M (2022) Thermal rearrangements during liquid–vapor phase pyrolysis polycondensation of polysilane to high-functional polycarbosilane: spectral and thermal studies. Journal of Thermal Analysis and Calorimetry, 147 (2). pp. 1251-1264. ISSN 13886150
Krishnan, GS and Thomas, P and Murali, N (2016) Synthesis, characterization, and thermo-mechanical properties of poly(acrylonitrile-co-2,3-dimethyl-1,3-butadiene-co-itaconic acid) as carbon fibre polymer precursors. RSC Advances, 6 (8). pp. 6182-6190. ISSN 20462069
Kshirsagar, PR and Jarali, CS and Raja, S and Raju, GU (2021) Exprimentation for flexural strength and fracture toughness on carbon and galss fiber self healing composites with bisphenol a diglycidyl ether and amine microcapsules. Composites: Mechanics, Computations, Applications, 12 (4). pp. 85-117. ISSN 21522057
Kulkarni, AG and Pai, BC and Balasubramanian, N (1983) Tubular reinforcing elements for energy absorbing composites. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Kulkarni, AG and Pai, BC and Balasubramanian, N (1979) The cementation technique for coating carbon fibres. Journal of Materials Science, 14. pp. 592-598. ISSN 0022-2461
Kulkarni, PD and Krishnan, M and Barshilia, Harish C and Predeep, P and Chowdhury, P (2013) Development of pinned electrode for magnetic tunnel junction with perpendicular magnetic anisotropy. In: IUMRS-ICA-2013, 16 Dec 2013, IISc, Bangalore.
Kulkarni, P D and Khan, Jakeer and Predeep, P and Chowdhury, P (2016) Thermally induced perpendicular magnetic anisotropy in CoFeB/MgO/CoFeB based magnetic tunnel junction. In: AIP Conference Proceedings.
Kumar, GV and Rao, KM and Kumar, JS and Raja, S (2011) Selective modal space control approach for smart composite cylindrical shell structure. ARPN Journal of Engineering and Applied Sciences, 6 (3). pp. 67-74. ISSN 1819-6608
Kumar, K. Mohan and Srikanth, L and Surendra, C and Kumar, C Rahul and Rao, RMVGK Development of Tooling and CFRP Components for SATCOM Application (ISRO-SAC). Project Report. National Aerospace Laboratories, Bangalore.
Kumar, M Praveen and Vinoy, KJ and Jha, RM (1994) Indexed Data Base of Radome (1960-1993). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Kumar, Mohan and Rao, RMVGK (2003) Fabrication Technology for the development of Nose Cone Radome for the Jaguar Maritime Aircraft. Project Report. NAL, Bangalore.
Kumar, Mohan and Rao, RMVGK (2003) Fabrication Technology for the development of Nose Radome for the Saras Aircraft. Project Report. NAL, Bangalore.
Kumar, A and Karadan, P and Barshilia, Harish C (2018) Synthesis of silver nanowires towards the development the ultrasensitive AgNWs/SiNPLs hybrid photodetector and flexible transparent conductor. Materials Science in Semiconductor Processing, 75. pp. 239-246. ISSN 13698001
Kumar, A and Khandwekar, G and Venkatesh, S and Roy Mahapatra, D and Dutta, Soma (2015) Dynamic response of a piezoelectric flapping wing. In: SPIE Smart Structures and Materials + Nondestructive Evaluation and Health Monitoring, 2015, San Diego, California, United States.
Kumar, A and Kumar, P and Srinivas, G and Khan, G H J and Siju, - and Barshilia, Harish C (2016) Fabrication of broadband quasi-omnidirectional antireflective surface on glass for photovoltaic application. In: AIP Conference Proceedings.
Kumar, A and Reddy, GS and Padhi, JB and Shiv, Narayan (2021) Asymmetric meander line slot-based X-band leaky wave antenna. Microwave and Optical Technology Letters, 63 (11). pp. 2846-2851. ISSN 08952477
Kumar, A and Samanta, S and Latha, S and Debnath, AK and Singh, A and Muthe, KP and Barshilia, Harish C (2017) Enhanced Cl2 sensitivity of cobalt-phthalocyanine film by utilizing a porous nanostructured surface fabricated on glass. RSC Advances, 7 (7). pp. 4135-4143. ISSN 20462069
Kumar, A and Yerva, SV and Barshilia, Harish C (2016) Broadband and wide angle anti-reflective nanoporous surface on poly (ethylene terephthalate) substrate using a single step plasma etching for applications in flexible electronics. Solar Energy Materials and Solar Cells, 155. pp. 184-193. ISSN 09270248
Kumar, KSA and Vardhan, ASS and Kumar, S and Saket, RK and Rajendran, R and Eslamian, S (2021) Microbial fuel cells for a soil-based green energy conversion system. International Journal of Hydrology Science and Technology, 11 (4). 439 -460. ISSN 20427808
Kumar, MS and Raghavendra, K and Ambresha, M and Ramachandra, HV and Venkataswamy, MA and Ranganath, VR (2015) Fractographic analysis of compression failures in unidirectional carbon fiber reinforced plastic composites. Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, 229 (6). pp. 439-446. ISSN 14644207
Kumar, P and Reddy, PV and Choudhury, Balamati and Chowdhury, P and Barshilia, Harish C (2016) Transparent conductive Ta/Al/Ta-grid electrode for optoelectronic and electromagnetic interference shielding applications. Thin Solid Films, 612. pp. 350-357. ISSN 00406090
Kumar, PR and Barshilia, HC and Basu, B and Basavaraju, U (2021) On the origin of spectrally selective high solar absorptance of TiB2-based tandem absorber with double layer antireflection coatings. Solar Energy Materials and Solar Cells, 220. ISSN 09270248
Kumar, R. and Kumar, R.M. and Bera, P. and Ariharan, S. and Lahiri, D. and Lahiri, I. (2017) Temperature-time dependent transmittance, sheet resistance and bonding energy of reduced graphene oxide on soda lime glass. Applied Surface Science, 425. pp. 558-563. ISSN 01694332
Kumar Poobalan, R and Pratap Singh, M and Basavaraju, U and Barshilia, H C and Basu, B (2022) Optical properties and thermal degradation of NbB2/Nb(BNO)/Al2O3 spectrally selective tandem absorber. Solar Energy, 247. pp. 510-519. ISSN 0038092X
Kumbar, SS and Jadhav, DA and Jarali, CS and Talange, DB and Afzal, A and Khan, SA and Asif, M and Abdullah, MZ (2021) Enhancement in cathodic redox reactions of single-chambered microbial fuel cells with castor oil-emitted powder as cathode material. Materials, 14 (16). pp. 1-13. ISSN 19961944
Kundan , K Verma and Sandeep, DN and Sugun, BS and Athimoolaganesh, S and Kotresh, Gaddikeri M and Ramesh, Sundaram (2013) Novel Design of Cocured Composite ‘T’ Joints with Integrally Woven 3D Inserts. In: 5th World Conference on 3D Fabrics and Their Applications, 16-17 Dec 2013, Delhi, India,.
kumar, Ramesh M and Madhava, MR (2008) Acoustic emission signature analysis of failure modes in composites. In: ISAMPE National Conference on Composites : INCCOM-7, 4-5 Dec 2008, Bangalore, India.
Lakshmi, RV and Aruna, ST (2016) Corrosion protection behaviour of silica–titania hybrid coatings embedded with silica nanoparticles. Surface Engineering, 33 (6). pp. 467-473. ISSN 1743-2944
Lakshmi, RV and Balaraju, JN and Mohan, AVN and Basu, Bharathibai J (2013) Inhibitor doped Sol-gel nanocomposite coatings for the corrosion protection of aircraft aluminum alloys. In: NSEST 2013, 2013-08-23, IISc, Bangalore.
Lakshmi, RV and Bharathidasan, T and Bera, Parthasarathi and Basu, Bharathibai J (2012) Fabrication of Superhydrophobic and Oleophobic sol–gel Nanocomposite coating. Surface and Coatings Technology, 206 (19-20). pp. 3888-3894. ISSN 0257-8972
Lakshmi, PG and Ananthapadmanabhanb, PV and Unnikrishanan, G and Aruna, ST (2020) Present status and future prospects of plasma sprayed multilayered thermal barrier coating systems. Journal of the European Ceramic Society, 40 (8). pp. 2731-2745. ISSN 2731–2745
Lakshmi, PG and Balaji, N and Anil Kumar, K and Ananthapadmanabhan, PV and Unnikrishnan, G and Senthil Kumar, S and Aruna, ST (2019) Solution combustion synthesis of calcia-magnesia-aluminosilicate powder and its interaction with yttria-stabilized zirconia and co-doped yttria-stabilized zirconia. Ceramic International, 45 (15). pp. 18255-18264. ISSN 18255–18264
Lakshmi, PG and Balaji, N and Kumar, KA and Ananthapadmanabhan, PV and Unnikrishnan, G and Senthil Kumar, S and Aruna, ST (2019) Solution combustion synthesis of calcia-magnesia-aluminosilicate powder and its interaction with yttria-stabilized zirconia and co-doped yttria-stabilized zirconia. Ceramics International, 45 (15). pp. 18255-18264. ISSN 02728842
Lakshmi, PG and Majithia, Sumil and Shwetha, V and Balaji, N and Aruna, ST (2019) Improved hot corrosion resistance of plasma sprayed YSZ/Gd2Zr2O7 thermal barrier coating over single layer YSZ. Materials Characterization, 147. pp. 199-206. ISSN 1044-5803
Lakshmi, RV and Aruna, ST and Anandan, C and Bera, Parthasarathi and Sampath, S (2017) EIS and XPS studies on the self-healing properties of Ce-modified silica-alumina hybrid coatings: Evidence for Ce(III) migration. Surface and Coatings Technology, 309. pp. 363-370. ISSN 02578972
Lakshmi, RV and Bera, Parthasarathi and Anandan, C (2016) Surface treatment and its effect on the electrochemical behavior of Ti-15Mo-3Nb-3Al alloy. RSC Advances, 6 (43). pp. 36345-36355. ISSN 20462069
Lakshmi, RV and Bera, Parthasarathi and Chakradhar, RPS (2019) Enhanced microwave absorption properties of PMMA modified MnFe2O4-polyaniline nanocomposites. Physical Chemistry Chemical Physics, 21 (9). pp. 5068-5077. ISSN 14639076
Lakshmi, RV and Bera, Parthasarathi and Hiremath, M and Dubey, V and Kundu, AK and Barshilia, Harish C (2022) Structural, magnetic, and dielectric properties of solution combustion synthesized LaFeO3, LaFe0.9Mn0.1O3, and LaMnO3perovskites. Physical Chemistry Chemical Physics, 24 (9). pp. 5462-5478. ISSN 14639076
Lakshmi, RV and Pal, K and Mandal, TK and Aruna, ST (2019) Multifunctional properties of ceria nanocubes synthesized by a hydrothermal method. Bulletin of Materials Science, 42 (5). pp. 1-8. ISSN 02504707
Lakshmi, RV and Pal, Kamalesh and Mandal, TK and Aruna, ST (2019) Multifunctional properties of ceria nanocubes synthesized by a hydrothermal method. Bulletin of Mate, 42 (5).
Lakshmi, RV and Sampath, S and Aruna, ST (2021) Silica-alumina based sol-gel coating containing cerium oxide nanofibers as a potent alternative to conversion coating for AA2024 alloy. Surface and Coatings Technology, 411. ISSN 02578972
Lakshminarayana, HV (1986) Finite element analysis of rotating laminated laminated composite annular discs. Composites, 17 (1). pp. 42-48.
Lakshminarayana, HV (1984) Study of interlaminar fracture in unidirectional composite materials. In: Analysis of Structures - A Commemorative volume published on the occasion of the 60th Anniversary of Dr. S.R.Valluri, Dec 1984, NAL, Bangalore, India.
Lakshminarayana, HV (1984) A symmetric rail shear test for mode II fracture toughness (G/IIc) of composite materials - Finite element analysis. Journal of Composite Materials, 18. pp. 227-238. ISSN 0021-9983
Lakshminarayana, HV and Dwarakanath, K (1991) Finite element analysis of a GFRP pressure vessel for NPOL Cochin. Project Report. National Aerospace Laboratories, Bangalore.
Lakshminarayana, HV and Dwarakanath, K (1992) Free vibration charecteristics of cylindrical shells made of composite materials. Journal of Sound and vibration, 154 (3). pp. 431-439.
Lakshminarayana, HV and Viswanath, S (1978) Application of the finite element method to the analysis of laminated composite shell structures. In: Symposium on Applications of Computer Methods in Engineering, 23-26 Aug 1977, California, USA.
Lakshminarayana, HV and Viswanath, S (1978) A high precision triangular laminated anisotropic cylindrical shell finite element. Computers and Structures, 8. pp. 633-640. ISSN 0045-7949
Lashmi, PG and Balaji, N and Senthil Kumar, S and Aruna, ST (2021) Hot corrosion properties of plasma sprayed La2Ce2O7/YSZ vis-à-vis La2Ce2O7/cluster paired zirconia thermal barrier coatings. Surface and Coatings Technology, 409. ISSN 02578972
Leelavathi, H and Veeraraghavalu, VM and Subrahmanyam, K and Pichamuthu, JP (1981) GaAs laser voice communicator. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Lodhe, M and Selvam, A and UdayaKumar, A and Balasubramanian, M (2016) Effect of polycarbosilane addition to a mixture of rice husk and coconut shell on SiC whisker growth. Ceramics International, 42 (2). pp. 2393-2401. ISSN 02728842
Lohith, N and Kumari, Asha and Varughese, Byji (2012) Influence of Fuselage Bulkhead Stiffness on Composite Wing Weight of a Civil Aircraft. In: INCCOM-12, 12 Dec 2012, Bangalore.
Madhava, MR (1990) Design & Development of Bridge Deck Plate Using Composite Materials and sandwich Construction : Concluding Report. Project Report. National Aerospace Laboratories, Bangalore.
Madhava, MR and Murali, TP and Rohatgi, PK (1986) Ultrasonic velocities in cast aluminun alloy-shell char particle composites. Journal of Materials Science Letters, 5 (9). pp. 895-897.
Madhava, MR and Upadhya, AR and Jayasurya, M (1985) Tests on Redux Bonded Sandwich Specimens. Project Report. National Aerospace Laboratories, Bangalore.
Mahadik, DB and Lakshmi, RV and Barshilia, Harish C (2015) High performance single layer nano-porous antireflection coatings on glass by sol-gel process for solar energy applications. Solar Energy Materials and Solar Cells, 140. pp. 61-68. ISSN 09270248
Mahale, Santhosh and Rajamani, Deepika and Revathi, A and Prakash, M.Rajendra and Srihari, Shylaja and Rao, RMVGK (2004) Hot-wet property characterisation of a high-temperature cured glass-epoxy composite in immersion environment. Journal of Reinforced Plastics and Composites, 23 (17). pp. 1883-1892. ISSN 0731-6844
Mahalingam, DK and Bera, Parthasarathi (2021) Characterization and microhardness of Ni−W−P coatings electrodeposited with gluconate bath. Surfaces and Interfaces, 22. ISSN 24680230
Mala, S and Latha, HKE and UdayaKumar, A and Lalithamba, H.S., HS (2022) Green synthesis of ITO nanoparticles using Carica papaya seed extract: impact of annealing temperature on microstructural and electrical properties of ITO thin films for sensor applications. Materials Technology, 37 (10). ISSN 10667857
Mala, S and Latha, HKE and Udayakumar, A and Lalithamba, HS (2021) Green synthesis of ITO nanoparticles using Carica papaya seed extract: impact of annealing temperature on microstructural and electrical properties of ITO thin films for sensor applications. Materials Technology, 37 (10). pp. 1432-1438. ISSN 10667857
Malipatil, SG and Majila, AN and Fernando, CD and Manjunatha, CM (2020) Influence of crack driving force on correlating stress ratio effects in fatigue crack growth rate of a nickel base super alloy IN720. International Journal of Advances in Engineering Sciences and Applied Mathematics volume, 12 (1). pp. 19-26.
Malipatil, SG and Majila, AN and Fernando, CD and Manjuprasad, M and Manjunatha, CM (2021) Damage Tolerance Behavior of a Nickel-Based Super-alloy GTM718 Under Cold-TURBISTAN Variable Amplitude Loads. Transactions of the Indian Institute of Metals, 74 (4). pp. 901-907.
Malipatil, SG and Majila, AN and Fernando, CD and Manjuprasad, M and Manjunatha, CM (2021) Fatigue crack growth behaviour of a nickel base super alloy GTM720 under cold-TURBISTAN spectrum load sequence. Theoretical and Applied Fracture Mechanics, 112. pp. 1-7. ISSN 0167-8442
Malipatil, SG and Majila, AN and Fernando, CD and Manjuprasad, M and Manjunatha, CM (2021) A comparison of damage tolerance behaviour of two different nickel base super alloys under a turbine standard spectrum loads. Materials Today: Proceedings, 47 (Part14). pp. 4897-4900. ISSN 2214-7853
Mani, A and Pai, BC and Vijayan, Kalyani (1986) Comparison of the graphitizabilities of heat-treated coal tar and its mesophase pitches. Journal of material science, 12. pp. 506-508.
Mani, A and Vijayan, Kalyani (1986) Fabrication of a flat film camera for X-ray diffraction by fibres. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Mani, A and Vijayan, Kalyani (1976) A furnace for high temperature powder diffractometry. Current science, 45 (10). pp. 371-372.
Manikandanath, NT and Balaraju, JN and Ying, Yang and Zhong , Chen (2013) Solder reaction between electroless Ni-Sn-P and Sn-3.5Ag. In: NSEST 2013, 2013-08-23, IISc, Bangalore.
Manikandanath, NT and Rimal Isaac, RS and Sanjith, S and Ramesh Kumar, P and Anooj, ES and Vallinayagam, S (2021) Superb catalytic activity of as-green synthesized copper ferrite's thermal decomposition of ammonium perchlorate. Journal of Molecular Structure, 1234. ISSN 00222860
Manisha, Banker M and Kotresh, Gaddikeri M and Byji, Varughese (2009) Global finite element analysis of SARAS composite wing for fuel pressure. Technical Report. NAL.
Manisha, Banker M and Kotresh, Gaddikeri M and Byji , Varughese and Subharao, M (2009) Finite Element Analysis of SARAS Wing Test Box Addressing Manufacturing Deviations. Technical Report. NAL, Bangalore.
Manjula, R. and Raju, N.V. and Chakradhar, R.P.S. and Johns, J. Effect of Thermal Aging and Chemical Treatment on Tensile Properties of Coir Fiber. Journal of Natural Fibers, 15 (1). pp. 112-121. ISSN 15440478
Manjunatha, C and Nagabhushana, BM and Nagabhushana, H and Chakradhar, RPS (2012) Transformation of hydrothermally derived nanowire cluster intermediates into CdSiO3 nanobelts. Journal of Materials Chemistry, 22. pp. 22392-22397.
Manjunatha, CM (2009) The Tensile Fatigue Behavior of a GFRP Composite with Rubber Particle Modified Epoxy Matrix. Journal of reinforced Plastics and Composites. pp. 2170-2182.
Manjunatha, CM and Jagannathan, N and Padmalatha, K and Kinloch, AJ and Taylor, AC (2011) The Effect of Micron-Rubber and Nano-Silica Particles on the Fatigue Crack Growth Behavior of an Epoxy Polymer. International Journal of Nanoscience, 10 (4&5). pp. 1095-1099. ISSN 0219-581X
Manjunatha, CM and Jagannathan, N and Padmalatha, K and Kinloch, AJ and Taylor, AC (2011) Improved variable-amplitude fatigue behavior of a glass-fiber-reinforced hybrid-toughened epoxy composite. Journal of Reinforced Plastics and Composites, 30 (21). pp. 1783-1793. ISSN 0731-6844
Manjunatha, CM and Ranganath, VR and Subba Reddy, TC (2007) Damage tolerance evaluation of composite T-joint. In: ICRACM 07, Feb. 2007, New Delhi, India.
Manjunatha, CM and Bojja, R and Jagannathan, N (2014) Enhanced Fatigue Performance of a Polymer Nanocomposite under Spectrum Loads. Materials Performance and Characterization, 3 (1). pp. 327-341. ISSN 2165-3992
Manjunatha, CM and Jagannathan, N and Padmalatha, K and Taylor, AC and Kinloch, AJ (2012) The fatigue and fracture behaviour of micron-rubber and nano-silica particles modified epoxy polymer. International Journal of Nanoscience, 11 (3). pp. 1-7. ISSN 1793-5350
Manjunatha, CM and Shylaja, Srihari (2022) A Brief Review on the Fatigue Behavior of Continuous Fiber Reinforced Thermosetting Epoxy Polymer Based Nano. Transactions of the Indian National Academy of Engineering, 7 (2). pp. 501-507. ISSN 2662-5415
Manjunatha, CM and Sprenger, S and Taylor, AC and Kinloch, AJ The Tensile Fatigue Behavior of a Glass-fiber Reinforced Plastic Composite Using a Hybrid-toughened Epoxy Matrix. Journal of Composite Materials, 44 (17). pp. 2095-2109. ISSN 0021-9983
Manjunatha, CM and Taylor, AC and Kinloch, AJ and Sprenger, S (2010) The tensile fatigue behaviour of a silica nanoparticle-modified glass fibre reinforced epoxy composite. Composites Science and Technology, 70 (1). pp. 193-199. ISSN 0266-3538
Manohar , HR and Chandrashekharaiah, TM and Venkateswarlu, K and Kori, SA (2012) Dry sliding wear response of A413 alloy:Influence of intermetallics and test parameters. Tribology International, 51. pp. 54-60. ISSN 0301-679X
Manoj, IV and Srihari, PV and Kulkarni, SS and Kumar, SS and Bharatish, A (2016) Assessment of thermal effects on the levitation speed of bump foil bearings made of low cost spring steel. Measurement: Journal of the International Measurement Confederation, 92. pp. 453-463. ISSN 02632241
Masood, Nadeem and Kotresh, Gaddikeri M and Viswamurthy , SR (2015) Design of End Casting for Thin Composite Stiffened Panels Subjected to Axial Compression Load. JOURNAL OF AEROSPACE SCIENCES & TECHNOLOGIES, 67 (4). pp. 467-475. ISSN 0972-950x
Masood, Nadeem and Viswamurthy , SR and Gaddikeri, KM (2014) Interface Toughness Measurements in Blade Stiffened Composite Skin Specimens. In: 18th NASAS (Eighteenth National Seminar on Aerospace Structures), 15-17 December 2014, VNIT Nagpur.
Masood, Nadeem and Viswamurthy , SR and Gaddikeri, KM and Arun, Kumar Singh (2014) Buckling & postbuckling of cocured composite stiffened panel under axial compression load- Computation & Testing. In: 18th NASAS (Eighteenth National Seminar on Aerospace Structures), 15-17 December 2014, VNIT Nagpur.
Masood, Nadeem and Viswamurthy , SR and Kotresh, Gaddikeri M and Arun, Kumar Singh (2015) Buckling and Postbuckling of Cocured Composite Stiffened Panel Under Axial Compression Load - Computation and Testing. Journal of Aerospace Sciences and Technologies, 67 (2B). pp. 355-360. ISSN 0972-950X
Masood, Nadeem and Kotresh, Gaddikeri M and Viswamurthy, SR (2021) Experimental and finite element numerical studies on the post-buckling behavior of composite stiffened panels. Mechanics of Advanced Materials and Structures, 28 (16). pp. 1677-1690. ISSN 15376494
Masood, Nadeem S and Viswamurthy, SR and Kotresh, Gaddikeri M (2020) Composites airframe panel design for post-buckling – An experimental investigation. Composite Structures, 241. ISSN 02638223
Masood, SN and Viswamurthy, SR and Singh, AK and Muthukumar, M and Gaddikeri, KM (2018) Simulation and validation of disbond growth in co-cured composite skin–stringer specimens using cohesive elements. Journal of Composite Materials, 52 (6). pp. 807-822. ISSN 00219983
Mathew, R T and Singam, S and Ghosh, P and Masa, S K and Prasad, M J N V (2022) The defining role of initial microstructure and processing temperature on microstructural evolution, hardness and tensile response of Al-Mg-Sc-Zr (AA5024) alloy processed by high pressure torsion. Journal of Alloys and Compounds, 901. ISSN 09258388
Matta, S and Kolanu, NR and Chinthapenta, V and Manjunatha, CM and Ramji, M (2019) Progressive damage analysis of adhesively bonded patch repaired carbon fibre–reinforced polymer specimen under compression involving cohesive zone model. International Journal of Damage Mechanics, 28 (10). pp. 1457-1489. ISSN 10567895
Meenu, Srivastava and Balaraju, JN and Ravisankar, B (2013) Oxidation and Hot Corrosion behaviour of Modified NiCoCrAlY Coatings. In: THERMANS 2013, 2013-12-19, Homi Bhabha National Institute, Mumbai.
Mishra, KK and Sahu, BK and Bonu, V and Das, A and Katiyar, RS and Ravindran, TR (2021) Raman Fingerprint of Pressure-Induced Phase Transition in SnO2Nanoparticles: Grüneisen Parameter and Thermal Expansion. Journal of Physical Chemistry C, 125 (42). pp. 23287-23298.
Mitchenko, EI and Prakash, Raghu V and Sunder, R (1992) Fatigue Crack Growth Under Programmed Equivalent of FALSTAFF Spectrum. Technical Report. National Aerospace Laboratories, Bangalore, India.
Mithuna, BS and Rangavittal, HK and Anilchandra, AR and Bojja, R and Jagannathan, N and Manjunatha, CM (2015) Stiffness degradation behavior of a polymer nanocomposite under constant amplitude fatigue loads. In: PROCEEDINGS OF NATIONAL SEMINAR ON “RESEARCH ASPIRANTS OF NANO MATERIALS AND ITS APPLICATIONS" (NSRANA-2015), 21-22 July, 2015, Bengaluru.
Mohan, L and Anandan, C and Rajendran, N (2016) Drug release characteristics of quercetin-loaded TiO2 nanotubes coated with chitosan. International Journal of Biological Macromolecules, 93. pp. 1633-1638. ISSN 01418130
Mohan, L and Anandan, C and Rajendran, N (2015) Effect of plasma nitriding on structure and biocompatibility of self-organised TiO nanotubes on Ti-6Al-7Nb. RSC Advances, 5 (52). pp. 41763-41771. ISSN 20462069
Mohan, L and Kar, S and Ren Hattori, - and Ishii-Teshima, M and Bera, Parthasarathi and Roy, S and Santra, TS and Shibata, T and Nagai, M (2021) Can titanium oxide nanotubes facilitate intracellular delivery by laser-assisted photoporation? Applied Surface Science, 543. ISSN 01694332
Mohan, L and Raja, MD and Uma, TS and Rajendran, N and Anandan, C (2016) In-Vitro Biocompatibility Studies of Plasma-Nitrided Titanium Alloy β-21S Using Fibroblast Cells. Journal of Materials Engineering and Performance, 25 (4). pp. 1508-1514. ISSN 10599495
Mohan Kumar, K and Surendra, C and Rahul Kumar, C and Rao, RMVGK (2006) ACS Dome-Installation. Project Report. National Aerospace Laboratories, Bangalore.
Momin, N and Manjanna, J and Aruna, S T and Senthil Kumar, S and Anjaneya, K C (2022) Effect of 20 mol % gadolinium doping on oxide ion conductivity of ceria as electrolyte for intermediate temperature solid oxide fuel cells. Ceramics International, 48 (23). pp. 35867-35873. ISSN 02728842
Momin, N and Manjanna, J and Aruna, S T and Senthilkumar, S and Reddy, D S and Kumar, A (2022) Structural and electrical properties of M-doped TiO2 (M = Ni, Cu, Zn) relevant to their application as electrolytes for solid oxide fuel cells. Journal of Chemical Sciences, 134 (2). ISSN 09743626
Momin, N and Manjanna, J and D'Souza, L and Aruna, ST and Senthil Kumar, S (2022) Synthesis, structure and ionic conductivity of nanocrystalline Ce1−xLaxO2−δ as an electrolyte for intermediate temperature solid oxide fuel cells. Journal of Alloys and Compounds, 896. ISSN 09258388
Momin, N and Manjanna, J and Senthilkumar, S and Aruna, ST (2022) La-and Gd-Doped CeO2 Nanoparticles as Electrolyte Materials for Intermediate Temperature Solid Oxide Fuel Cells. In: Recent Trends in Electrochemical Science and Technology. Springer Proceedings in Materials (15). Springer Nature, Singapore, pp. 127-137. ISBN 978-981-16-7554-6
Moorthy, Emayavaramba MV and Saji, D and Ravi, Kumar P (2009) Quality assurance (QA) document for composite components of Tejas-Light Combat Aircraft (LCA). Technical Report. NAL.
Mouli, GC and Chakradhar, RPS and Srivastava, Meenu and Barshilia, Harish C (2022) Cold-Sprayed Cu-Zn-Al2O3 Coating on Magnesium Alloy: Enhanced Microhardness and Corrosion Behavior. Journal of Materials Engineering and Performance. pp. 1-15. ISSN 10599495
Mukherjee, D and Dey, A and Esther, A.C.M and Palai, D, D and Sridhara, N and Bera, P and Bhattacharya, M and Rajendra, A and Sharma, A.K and Mukhopadhyay, A.K (2018) Reversible, repeatable and low phase transition behaviour of spin coated nanostructured vanadium oxide thin films with superior mechanical properties. Ceramics International, 44 (8). pp. 1-9. ISSN 02728842
Mukherjee, Somenath and Barat, K and Tarafder, S and Sivaprasad, S and Kar, SK (2021) Creep-fatigue behavior of a newly developed ultra-supercritical steam turbine grade nickel-based superalloy, Haynes 282. Materials Performance and Characterization, 10 (2). ISSN 21653992
Murali Krishna, D and Ramanaiah, B and James, P and Gaddikeri, KM and Varughese, Byji and Subba Rao, M (2007) Experimental investigation on a mechanically fastened splice joint in a composites aircraft wing. In: 15th National Conference on Aerospace Structures, 15-16 Oct 2007, Coimbatore, Tamil Nadu, India.
Murthy, Aruna V and Dattaguru, B and Narayana, HVL and Rao, AK (1991) Stress and strength analysis of pin joints in laminated anisotropic plates. Composite Structures, 19 (4). pp. 299-312. ISSN 0263-8223
Murthy, MVV (1985) Design and Development of a Composite Rudder a (A Project Proposal to ARM). Project Report. National Aerospace Laboratories, Bangalore.
Murthy, MVV and Bapu Rao, MN (1988) Three-Dimensional stress problem of a finite thick plate with a through crack under tension.13;. International Journal of Solids and Structures, 24 (7). pp. 693-703.
Murthy, Sridhara S (2010) Design of Aircraft Structures - Structural Design of Carbon Fiber Composite Wing for the SARAS Civil Transport Aircraft. In: International Winter School on Advances in Aeronautical Materials and Technologies, 15-19, Dec 2010, Hyderabad, India.
Nag, Abanti and Bose, Rapaka SC (2016) High temperature transport properties of co-substituted Ca1-xLnxMn1-xNbxO3 (Ln = Yb, Lu; 0.02 ≤ x ≤}. Materials Research Bulletin, 74. pp. 41-49. ISSN 00255408
Nag, Abanti and Rao, RR and Panda, PK (2021) High temperature ceramic radomes (HTCR) – A review. Ceramics International, 47 (15). pp. 20793-20806. ISSN 02728842
Naga Krishna, N and Ashfaq, M and Susila, P and Sivaprasad, K and Venkateswarlu, K (2015) Mechanical anisotropy and microstructural changes during cryorolling of Al-Mg-Si alloy. Materials Characterization, 107. pp. 302-308. ISSN 10445803
Naganarayana, BP and Prathap, Gangan (1988) Implementation of 2-node Shear-flexible field-consistent13; composite beam element in SAP IV. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Nagaraja, A M and Gururaja, S and UdayaKumar, A (2022) Tensile behavior of ceramic matrix minicomposites with engineered interphases fabricated by chemical vapor infiltration. Journal of the European Ceramic Society, 42 (6). pp. 2659-2671. ISSN 09552219
Nagarajan, S and Karthik, G and Jose, JK and Barshilia, HC (2021) Sprayable reduced graphene oxide based high-temperature solar absorber coatings for concentrated solar power applications. International Journal of Energy Research, 45 (15). pp. 21487-21496. ISSN 0363-907X
Nagarajappa, N and Malipatil, SG and Majila, AN and Fernando, CD and Manjuprasad, M and Manjunatha, CM (2021) Fatigue Crack Growth Prediction in a Nickel‑Base Superalloy Under Spectrum Loads Using FRANC3D. Transactions of the Indian National Academy of Engineering, 7. pp. 533-540. ISSN 2662-5423
Nair, RU and Ramesh, R and Jha, RM (2005) Preliminary EM Characterisation of Honeycomb Sandwich Saras Radome. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Nair, RU and Sajjan, Sangeetha S and Jha, RM (2010) Electromagnetic Material Characterization Techniques for Honeycomb Structures. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Nair, RU and Venu, KS and Jha, RM (2006) EM Characterization of FRP Composite Samples with Novel Formulations. Technical Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Nair, RM and Bindhu, B and Manikandanath, NT and Rimal Isaac, RS (2022) An eco-friendly green biopolymer blend for copper corrosion inhibition. Polymer Bulletin, 79 (1). . 121-136. ISSN 01700839
Nandana, MS and Bhat, KU and Manjunatha, CM (2019) Improved fatigue crack growth resistance by retrogression and re-aging heat treatment in 7010 aluminum alloy. Fatigue and Fracture of Engineering Materials and Structures, 42 (3). pp. 719-731. ISSN 8756758X
Naragund, V.S and Panda, P.K (2020) Electrospinning of cellulose acetate nanofiber membrane using methyl ethyl ketone and N, N-Dimethylacetamide as solvents. Materials Chemistry and Physics, 240. ISSN 02540584
Naragund, VS and Panda, PK (2021) Electrospun polyacrylonitrile nanofiber membranes for air filtration application. International Journal of Environmental Science and Technology, 19. pp. 10233-10244. ISSN 17351472
Natarajan, Kandasamy and Rao, RMVGK (1994) Toughening studies on an ABS/PC blend-modified epoxy resin system. High Performance Polymer, 6. pp. 241-248. ISSN 0954-0083
Naveen, VP and Vani, A and Prakasha, V and Divakar, CJ and Ananthkrishnan, T and Rao, RMVGK (2000) Studies on mechanical behavior of knitted glass-epoxy composites. Journal of Reinforced Plastics and Composites, 19 (5). pp. 396-402. ISSN 0731-6844
Naveen, V and Raja, S and Deshpande, Abhijit P (2019) A two-step approach for synthesis, characterization and analysis of dicyclopentadiene–urea formaldehyde–siloxane-based double-walled microcapsules used in self-healing composites. https://link.springer.com/article/10.1007/s12588-019-09247-2, 23 (2). pp. 157-169. ISSN 0972656X
Nimbal, SS and Banker, Manisha M and Roopa, A and Varughese, B and Sundaram, R (2017) Effect of Gap Induced Waviness on Compressive Strength of Laminated Composites. In: International Conference on Advancements in Aeromechanical Materials for Manufacturing (ICAAMM-2016): Organized by MLR Institute of Technology, Telangana, India.
Ningaiah, - and Venkatasubramanyam, DV and Sastry, HSP and Mohiddin, Jaffer M and Rao, Ramakrishna BV (1982) Liner for filament wound vessels. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Niranjan, K and Kondaiah, P and Srinivas, G and Barshilia, Harish C (2019) Optimization of W/WAlSiN/SiON/SiO2 tandem absorber consisting of double layer anti-reflection coating with broadband absorption in the solar spectrum region. Applied Surface Science, 496. ISSN 01694332
Niranjanaa, K and Jerald Maria Antony, G and Raja, S (2019) A study on adsorption of gases in the thin film nanocomposites. In: International Conference on Materials for Energy and Environment (ICMEE 2018), Chennai, Tamil Nadu, India.
Nirmal, C and Maithi, SN and Padmavathi, T and Vanaja, A and Rao, RMVGK (2006) Studies on hydroxyl terminated polybutadiene toughened phenolic resin13;. High Performance Polymers, 18 (1). pp. 57-69.
Nitesh, Gupta and Augustin, MJ and Sakthi Sathya, P S and Saransh, Jain and Viswamurthy , SR and Kotresh, Gaddikeri M and Ramesh, Sundaram (2013) Structural Health Monitoring of Composite Aircraft Structures Using Fiber Bragg Grating Sensors. Journal of the Indian Institute of Science, 93 (4). pp. 735-750. ISSN 0970-4140
Nitesh, Gupta and Ramesh, Sundaram (2009) Fiber optic sensors for monitoring flow in vacuum enhanced resin infusion technology (VERITy) process. Composites Part A: applied Science and Manufacturing, 40 (8). pp. 1065-1070. ISSN 1359-835X
Noolvi, B and Raja, S and Nagaraj, S (2019) Constitutive modeling of smart adaptive composite with inactive SMP. In: International Conference on Advances in Materials, Manufacturing and Applied Sciences.
Novak, V and Sittner, P and Dayananda, GN and Braz-Fernandes, FM and Mahesh, KK (2008) Electric resistance variation of NiTi shape memory alloy wires in thermomechanical tests: Experiments and simulation. Materials Science and Engineering A. pp. 127-133.
Padaki, NV and Alagirusamy, R and Deopura, BL and Sugun, BS and Fangueiro, Raul (2008) Low velocity impact behaviour of textile reinforced composites. Indian Journal of Fibre Br Textile Research.
Padaki, NV and Alagirusamy, R and Sugun, BS (2008) 3D Preforming technologies for composite applications. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-033), 26-28 Jun 2008, Bangalore, India.
Padaki, NV and Alagirusamy, R and Sugun, BS (2006) Knitted Preforms for Composite Application. Journal of Industrial Textiles.
Padma, A and Rao, RMVGK and Nagendrappa, G (1997) Effect of Prereaction on Curing of Elastomer-Modified Epoxy Resins. Journal of Applied Polymer Science, 65. pp. 1751-1757. ISSN 0360-6834
Padma, G and Pandare, KV and Ajay, Chandra and Sridhar, MK (1995) Synthesis of Liquid Crystalline Epoxy Resin and Properties13; Carbon Fiber Laminate. Technical Report. National Aerospace Laboratories, Bangalore, India.
Padmavathi, T and Naidu, SV and Rao, RMVGK (2012) Studies on mechanical behavior of surface modified sisal fibre - Epoxy composites. Journal of Reinforced Plastics and Composites, 31 (8). pp. 519-532. ISSN 0731-6844
Padmavathi, T and Venkatanaidu, S and Rao, RMVGK (2012) Characterisation studies on Mercerised Sisal Fibers for Composite Applications. Journal of Polymer Materials, 29 (2). pp. 261-272.
Pai, BC and Kulkarni, AG and Bhaskaran, TA and Balasubramanian, N (1980) Coating structure of metal-coated carbon fibres. Journal of Materials Science, 15 (7). pp. 1860-1863. ISSN 0022-2461
Pai, BC and Kulkarni, AG and Parameswara, MA and Balasubramanian, N (1983) Interface stability in vacuum infiltrated stainless steel and nichrome reinforced aluminium composites. Journal of Materials Science Letters, 2 (10). pp. 553-557.
Pai, BC and Kulkarni, AG and Parameswara, MA and Balasubramanian, N (1983) Interface stability in vacuum infiltrated stainless steel and nichrome reinforced aluminum composites. Journal of Materials Science Letters, 2 (10). pp. 553-557. ISSN 0261-8028 (Paper) 1573-4811 (Online)
Pai, BC and Ray, S and Prabhakar, KV and Rohatgi, PK (1976) Fabrication of aluminum-alumina/magnesia/particulate composites in foundries using magnesium additions to the melts. Materials Science and Engineering, 24. pp. 31-44.
Pai, BC and Rohatgi, PK (1975) Copper coating on graphite particles (for dispersion in cast aluminum alloys). Materials Science and Engineering, 21. pp. 161-167.
Pai, Raghavendra and Kamath, MS and Rao, RMVGK Acid Resistance of glass fibre composites with Different layup sequences Part-II Degradation studies. Journal of Reinforced Plastics and Composites, 16 (11). pp. 1013-1019. ISSN 0731-6844
Pal, K and Mukherjee, A and Seikh, MM and Bera, Parthasarathi and Gayen, A (2021) Synthesis, structure, CO oxidation, and H2 production activities of CaCu3−xMnxTi4−xMnxO12 (x = 0, 0.5, and 1.0). Ceramics International, 47 (10). pp. 14798-14808. ISSN 02728842
Palai, D and Bhattacharya, M and Mallick, AB and Bera, Parthasarathi and Sharma, AK and Mukhopadhyay, AK and Dey, A (2016) Microstructural, thermo-optical, mechanical and tribological behaviours of vacuum heat treated ultra thin SS304 foils. Materials Research Express, 3 (9). ISSN 20531591
Palai, D and Carmel Mary Esther, A and Porwal, D and Pradeepkumar, MS and Raghavendra Kumar, D and Bera, Parthasarathi and Sridhara, N and Dey, A (2016) Reversible phase transition in vanadium oxide films sputtered on metal substrates. Philosophical Magazine Letters, 96 (11). pp. 440-446. ISSN 09500839
Paligan, AA and Shubha, V and Sathiyamoorthy, K and Venu, G and Jayaprakash, C and Manjunath, P (2014) Evaluation of ceramic composite wedge for high speed combustor applications. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 27-29 Mar 2014, NITE, Suratkal, India.
Panbarasu, K and Ranganath, V R and Prakash, R V (2022) A Study on Flexure Behavior of AS4/914 Grade Carbon Fiber Reinforced Plastic Laminates under Static and Fatigue Loads. Journal of Materials Engineering and Performance, 32. pp. 3284-3297. ISSN 10599495
Panbarasu, K and Ranganath, VR and Prakash, Raghu V (2021) An experimental study on impact behavior of quasi-isotropic CFRP laminates. In: International Conference on Materials, Processing & Characterization.
Panda, PK and Mariappan, L and Kannan, TS (1998) Preparation of Al203 - SiCw in-situ composite powder mixtures by carbothermal reduction of kaolinite. In: National Seminar on "Composite Materials - Manufacturing Processing, Evaluation, Application, and Technologies" (COMPEAT-98), 19-20 Mar 1998, Jamshedpur, India.
Panda, PK and Ramakrishna, S (2007) Electrospinning of alumina nanofibers using different precursors. Journal of Materials Science, 42. pp. 2189-2193.
Panda, PK and Sahoo, B and Chandraiah, M and Raghavan, S and Manoj, B and Ramakrishna, J and Kiran, P (2015) Piezoelectric Energy Harvesting Using PZT Bimorphs and Multilayered Stacks. Journal of Electronic Materials, 44 (11). pp. 4349-4353. ISSN 03615235
Panda, PK and Sahoo, B and Thejas, T S and Krishna, M (2022) High d 33 Lead-Free Piezoceramics: A Review. Journal of Electronic Materials, 51 (3). pp. 938-952. ISSN 03615235
Parameswara, MA and Pai, BC and Balasubramanian, N (1978) Preparation of alumina fibre by chemical tapor deposition. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Parida, BK and Nicholas, T (1994) Elevated temperature fatigue crack growth behavior of Ti-1100. Fatiue Fracture Engineering Materials Structures, 17 (5). pp. 551-561.
Parida, BK and Prakash, Raghu V (1995) Evaluation of Bolt-Pull- Through Strength of Carbon Fibre Composite. Technical Report. National Aerospace Laboratories, Bangalore, India.
Parida, BK and Vijayaraju, K and Mangalgiri, Prakash D (2002) Buckling and fracture behavior of tapered composite panels containing ply drops13;. In: Composite Materilas: Testing, Design, and Acceptance Criteria, 26-27 Mar 2001, Phoenix, AZ, United States.
Pathak, S M and Kumar, V P and Bonu, V and Latha, S and Mishnaevsky, L and Lakshmi, R V and Bera, Parthasarathi and Barshilia, H C (2022) Solid particle erosion studies of ceramic oxides reinforced water-based PU nanocomposite coatings for wind turbine blade protection. Ceramics International, 48 (23). pp. 35788-35798. ISSN 02728842
Patra, N and Prajapat, C.L. and De, R and Rao, KD and Barshilia, Harish C (2018) Correlation of structural ordering with magnetic properties of pulsed laser deposited Co2FeGa Heusler alloy thin films. Journal of Alloys and Compounds, 748. pp. 653-670. ISSN 09258388 (In Press)
Pattanaik, S and Gopinathan, KG and Arunachalam, VS (1974) Dispersion hardened titanium alloys by powder metallurgy. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Paul, Subin (2005) Study of impedance based control for vibration reduction13;. Technical Report. National Aerospace Laboratories, Bangalore.
Paul, Tanusree and Jha, RM (2006) A Cross-Indexed Bibliography for Metamaterial Technology (1968-2006). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Pavan, RMV and Saravanan, M and Dinesh, AR and Rao, YJ and Srihari, Shylaja and Revathi, A (2001) Hygrothermal Effects on Painted and Unpainted Glass/Epoxy Composites—Part B: Degradation Studies. Journal of Reinforced Plastics and Composites, 20 (12). pp. 1048-1053. ISSN 0731-6844
Pavan, RMV and Saravanan, V and Dinesh, AR and Rao, YJ and Srihari, Shylaja and Revathi, A (2001) Hygrothermal Effects on Painted and Unpainted Glass/Epoxy Composites—Part A:Moisture Absorption Characteristics. Journal of Reinforced Plastics and Composites, 20 (12). pp. 1036-1046. ISSN 0731-6844
Pawar, OA and Gaikhe, YS and Tewari, A and Sundaram, R and Joshi, SS (2015) Analysis of hole quality in drilling GLARE fiber metal laminates. Composite Structures, 123. pp. 350-365. ISSN 02638223
Pillai, AM and Rajendra, A and Sharma, AK and Bera, Parthasarathi and Poornima, S and Sampath, S (2021) Development of vanadium impregnated flat absorber composite PEO coating on AA6061 alloy. Surface and Coatings Technology, 410. ISSN 02578972
Pitchai, P and Gowda, MNN and Subba Rao, M (2009) Assembly process sheets for composite co-cured FIN of Tejas-Light Combat Aircraft (LCA). Technical Report. NAL.
Polagangu, James and Mahesh, K and Byji, Varughese (2019) Estimation of failure load of composite bonded joints using 1D and 2D FE analysis and the mathematical equation of strain and bond energy in the adhesive layer. Mechanics of Advanced Materials and Structures, 26 (1). pp. 20-28. ISSN 15376494
Polagangu , James and Murali Krishna, D and Gaddikeri, KM and Byji, Varughese (2009) Finite Element Analysis of Inter Spar Ribs of Composite Wing of Light Transport Aircraft against Brazier Load. In: National Conference Scientific Achievements of SC & ST Scientists & Technologists, 14-16 April 2009, Bangalore.
Politova, ED and Golubko, NV and Kaleva, GM and Mosunov, AV and Sadovskaya, NV and Yu Stefanovich, S and Kiselev, DA and Panda, PK (2019) Structure, ferroelectric and piezoelectric properties of KNN-based perovskite ceramics. Ferroelectrics, 538 (1). pp. 45-51. ISSN 00150193
Politova, ED and Golubko, NV and Kaleva, GM and Panda, PK (2019) Ferroelectric and local piezoelectric properties of modified KNN ceramics. Integrated Ferroelectrics, 196 (1). pp. 52-59. ISSN 10584587
Politova, ED and Strebkov, DA and Belkova, DA and Kaleva, GM and Panda, PK (2019) Relaxation effects in nonstoichiometric NBT-based ceramics. Defect and Diffusion Forum, 391. pp. 95-100. ISSN 10120386
Porkodi, P and Abhilash, J K and Shukla, H K (2022) On the structural changes, mechanism and kinetics of stabilization of lignin blended polyacrylonitrile copolymer fiber. Journal of Polymer Research, 29 (10). ISSN 10229760
Porkodi, P and Abhilash, JK and Shukla, HK (2022) On the structural changes, mechanism and kinetics of stabilization of lignin blended polyacrylonitrile copolymer fiber. Journal of Polymer Research, 29 (10). ISSN 10229760
Porkodi, P and Abhilash, JK and Sunil, S and Pardhi, Tarun Kumar and Shukla, HK and Shete, SK and Kumar, A (2021) Lignin addition to polyacrylonitrile copolymer solution and its effect on the properties of carbon fiber precursor. Journal of Polymer Research, 28 (2). ISSN 10229760
Porwal, D and Carmel Mary Esther, A and Dey, A and Gupta, AK and Raghavendra Kumar, D and Bera, P and Barshilia, Harish C and Bhattacharya, M and Mukhopadhyay, AK and Khan, K and Sharma, AK (2016) Effect of low temperature vacuum annealing on microstructural, optical, electronic, electrical, nanomechanical properties and phase transition behavior of sputtered vanadium oxide thin films. Materials Research Express, 3 (10). ISSN 20531591
Prabhudev, MS and Auradi, V and Venkateswarlu, K and Kori, SA (2016) Influence of Combined Addition of Boron and Strontium on High-Temperature Wear Behavior of A356 Alloy. Tribology Transactions, 59 (1). pp. 1-7. ISSN 10402004
Pradeep, D and Reddy, N Janardhana and Kumar, C Rahul and Srikanth, L and Rao, RMVGK (2007) Studies on mechanical behavior of glass epoxy composites with induced defects and correlations with NDT characterization parameters. Journal of Reinforced Plastics and Composites, 26 (15). pp. 1539-1556.
Pradeepkumar, MS and Sibin, KP and Hasan, MA and Dey, A and Mukhopadhyay, AK (2021) Nanoindentation based fracture studies of ITO coating. Ceramics International, 47 (10). pp. 14717-14722. ISSN 02728842
Prakash, M.Rajendra and Murgan, Senthil and Rao, RMVGK (2007) NDT and Post Cure Report on HANSA-3 Aircraft Composite Components - Sl.No. 011. Project Report. National Aerospace Laboratories, Bangalore.
Prakash, M.Rajendra and Murugan, Sendil M and Rao, RMVGK (2006) HANSA-3 aircraft series productionisation program-support services (Postcure and NDT qualification). Project Report. National Aerospace Laboratories, Bangalore.
Prakash, M.Rajendra and Rao, RMVGK (2003) NDT report on the Nose Cone Radome for Jaguar Maritime Aircraft. Project Report. NAL, Bangalore.
Prakash, M.Rajendra and Rao, RMVGK (2007) On Field Inspection of HANSA-3 Aircraft (VT-HNS) at IIT - Kanpur. Project Report. National Aerospace Laboratories, Bangalore.
Prakash, M.Rajendra and Revathi, A and Chandrakala, - and Rao, RMVGK (2003) Material Characterization of the Radome Fairings (TDF & ADF) for HOMI TU-142M Aircraft. Project Report. NAL, Bangalore.
Prakash, B and Senthil Kumar, S and Aruna, ST (2017) Microstructure and performance of LSM/YSZ based solid oxide fuel cell cathodes fabricated from solution combustion co-synthesized powders and by solution precursor plasma spraying. Surface and Coatings Technology, 310. pp. 25-32. ISSN 02578972
Prakash, BS and Balaji, N and Kumar, SS and Aruna, ST (2016) Properties of nano-structured Ni/YSZ anodes fabricated from plasma sprayable NiO/YSZ powder prepared by single step solution combustion method. Applied Surface Science, 389. pp. 983-989. ISSN 01694332
Prakashaiah, B G and Jayaprakash, G K and Rani, B E A (2022) A Study of Corrosion Behavior of (E)-2-(3,4-dihydroxybenzylidene)hydrazinecarbothioamide and Bis [[3,4-dihydroxyphenylmethylene] Carbonothioicdihydrazide]-Sealed Anodized AA2024-T3. Journal of Bio- and Tribo-Corrosion, 8 (3). pp. 1-10. ISSN 21984220
Prakashaiah, BG and Nityananda Shetty, A and Amitha Rani, BE (2019) Improvement of Anticorrosion Properties of Epoxy Primer Coating on Aluminum Alloy 2024-T3 by Thiosemicarbazone Derivatives. JOM, 71 (12). pp. 4880-4890. ISSN 10474838
Prakashaiah, BG and Vinaya Kumara, D and Anup Pandith, A and Nityananda Shetty, A and Amitha Rani, BE (2018) Corrosion inhibition of 2024-T3 aluminum alloy in 3.5% NaCl by thiosemicarbazone derivatives. Corrosion Science, 136. pp. 326-338. ISSN 0010938X
Prasad, BD and Nagabhushana, H and Thyagarajan, K and Sharma, SC and Shivakumara, C and Gopal, NO and Nagabhushana, BM and Ke, SC and Chakradhar, RPS and Prabhakaran, KR (2016) Incorporation of Cr3+ ions in tuning the magnetic and transport properties of nano zinc ferrite. Journal of Alloys and Compounds, 657. pp. 95-108. ISSN 09258388
Radhakrishnan, G and Dinesh, BL and Srinivasa rao, A and Kotresh, Gaddikeri M and Sudheendra, HN and Subba Rao, M Master process sheets for fabrication of CFC centre fuselage parts of TEJAS (Light Combat Aircraft): part-2. Technical Report. NAL.
Raghavedra, K and Madan, M and Sujata, M and Bhaumik, SK (2021) Failure of flexible couplings in environmental control system (ECS) of an aircraft. Engineering Failure Analysis, 125. ISSN 13506307
Raghavendra, RM and Praneeth, KPSS and Dutta, Soma (2017) Preparation and Characterization of BaTiO3–PbZrTiO3 Coating for Pyroelectric Energy Harvesting. Journal of Electronic Materials, 46 (1). pp. 101-106. ISSN 03615235
Raghu Prasad, BK and Pavan Kumar, DVTG (2008) Analysis of composite ENF specimen using higher order beam theories. Thin-Walled Structures, 46 (6). 676 -688.
Rahaman, SA and Selvarajan, S and Santhoshkumar, YNV (2014) Design, development and analysis of advanced airboat propeller by using bamboo composite fibre material. International Journal of Engineering Development and Research, 2 (4). pp. 3475-3481. ISSN 2321-9939
Rahman, O S A and Mukherjee, B and Priyadershini, S and Gunjan, M R and Raj, R and Aruna, ST and Keshri, A K (2020) Investigating the wetting phenomena and fabrication of sticky, para-hydrophobic cerium oxide coating. Journal of the European Ceramic Society, 40 (15). pp. 5749-5757. ISSN 09552219
Rahul Kumar, C and Radhakrishna, K and Rao, RMVGK (2005) Postcuring effects on impact behavior of glass/epoxy composite laminates. Journal of Reinforced Plastics and Composites, 24 (9). pp. 949-960. ISSN 0731-6844
Raj, CJ and Paramesh, G and Prakash, B and Meher, KRSP and Varma, KBR (2016) Origin of giant dielectric constant and conductivity behavior in Zn1-xMgxO (0 ≤ x ≤ 0.1) ceramics. Materials Research Bulletin, 74. pp. 1-8. ISSN 00255408
Raj, S S and Mathew, R M and Nair, Y and Aruna, S T and Vinod, T P (2022) Fabrication and Applications of Wrinkled Soft Substrates: An Overview. ChemistrySelect, 7 (16). ISSN 23656549
Raja, D and Sreedeep, R and Pashilkar, AA and Kamesh, JV (2005) Active flutter suppression of a composite plate with PZT multilayered benders using LQG control. In: International Conference on Smart Materials Structures and Systems, 28-30 Jul 2005, Bangalore, India.
Raja, S and Balasubramaniam, R and Bhattacharya, Partha and Cjunjanna, G (2001) Damage modelling and prediction using smart structure concepts - A finite element analysis approach. In: ICTACEM 2001: Second International Conference on Theoretical, Applied, Computational and Experimental Mechanics, 27-30 Dec 2001, Kharagpur, India.
Raja, S and Dwarakanathan, D and Sinha, PK and Prathap, Gangan (2004) Bending behavior of piezo-hygrothermo-elastic smart laminated composite flat and curved plates with active control13;. Journal of Reinforced Plastics and Composites, 23 (3). pp. 265-290. ISSN 0731-6844
Raja, S and Sinha, PK and Prathap, Gangan and Bhattacharya, Partha (2002) Influence of one and two dimensional piezoelectric actuation on active vibration control of smart panels. Aerospace Science and Technology, 6 (3). pp. 209-216. ISSN 1270-9638
Rajak, P and Kulkarni, PD and Krishnan, M and Chowdhury, P and Bhattacharyya, S (2019) Spatially resolved structure and domain wall propagation in defect induced SmCo/Co exchange spring magnet. Journal of Magnetism and Magnetic Materials, 491. ISSN 03048853
Rajendra Prakash, M and Rao, RMVGK (2004) NDT Report on Hansa -3 (VT -HNX). Project Report. National Aerospace Laboratories, Bangalore.
Raju, KN and Dash, PK (1979) Plastic energy dissipation rate during stable crack growth in a plate of finite thickness under biaxial loading. In: Proceedings of the International Conference on Fracture Mechanics in Engineering Application, 26-30 Mar 1979, Bangalore, India.
Raju, M and Reddy, CR and Narasimha Swamy, MR and Giridhar, G and Srikanth, L and Rajendra Prakash, M and Rao, RMVGK (2006) Repair Effectiveness Studies on Impact Damaged Sandwich Composite Constructions. Journal of Reinforced Plastics and Composites, 25 (1). ISSN 0731-6844
Raju, J and Sreedhar, DS and Manjunatha, CM (2014) Prediction of Delamination Growth Behavior in a Carbon Fiber Composite Laminate Subjected to Constant Amplitude Compression-Compression Fatigue Loads. Global Journal of Engineering, Design & Technology, 3 (4). pp. 19-23. ISSN 23197293
Raju, SV and Godwal, BK and Singh, AK and Jeanloz, R and Saxena, SK (2018) High-pressure strengths of Ni3Al and Ni-Al-Cr. Journal of Alloys and Compounds, 741. pp. 642-647. ISSN 09258388
Ramaiah, KV and Saikrishna, CN and Bhagyaraj, J and Gouthama, - and Bhaumik, SK (2019) Microstructure and functional behaviour of shape memory annealed Ni 24.7 Ti 50.3 Pd 25 and Ni 24.7 Ti 49.3 Pd 25 Sc 1 alloys. Materials Characterization, 148. pp. 345-359. ISSN 10445803
Raman, PS and Kumari, Vasantha R (1981) Studies on the use of jute fibres for plastic reinforcement. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Raman, PS and Rangaraju, R and Kumar, Mohan S (1987) X-Radiography of composites13; 13; 13; 13; 13; 13; 13; 13; 13; 13; 13; 13; 13;. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Ramanaiah, B and Ramachandra, HV and Sanjeev Kumar, S and Kotresh, Gaddikeri M and Byji, Varughese and Ramesh, Sundaram and Kamath, GM and Subba Rao, M (2009) Challenges in Static Testing of Co-Cured Co-Bonded Composite Aircraft Structures. In: Natonal Conference on Scientific Achievements of SC & ST Scientisits and Technologists, 14-16 April 2009, Bangalore.
Ramasesha, Sheela K and Singh, AK (1991) Measurement under pressure of thermoelectric power along the thickness of a thin specimen. Review of Scientific Instruments, 62 (5). pp. 1372-1373.
Ramasesha, Sheela K and Singh, AK and Murugaraj, P (1991) Anisotropic thermoelectric power in YBa,Cu,O7-x, single crystals under pressures up to 8 GPa. Physical Review B, 43 (10). pp. 8620-8622.
Ramaseshan, S and Vijayan, Kalyani (1976) Use of radical scavengers in X-ray data collection form protein crystals. Current Science, 45 (2). p. 49.
Ramaswamy, Setty J and Christopher, Daniel and Venkatesh, S and Byji, Varughese and Dayananda, GN (2009) Assembly process sheets for composite co-cured FIN of Tejas-light combat aircraft (LCA). Technical Report. NAL.
Ramaswamy, Setty J and Dayananda, GN (2009) Design aspects of nitrogen reservoirs. Technical Report. NAL.
Ramesh, R and Kishore, - and Rao, RMVGK (1983) Dry wear studies on glass-fibre reinforced epoxy composites. Wear, 89. pp. 131-136.
Ramesh, Sundaram and Kamath, GM and Gupta, Nitesh (2012) Structural health monitoring of composite structures - Issues and Challenges. International Journal of Vehicle Structures & Systems, 4 (3). pp. 74-85. ISSN 0975-3540
Ramesh, Sundaram et. al. (2009) Workshop on repair technology for composite structures- lecture notes-Vol.1 (Theory). Technical Report. NAL.
Ramesh, TG and Shubha, V (1986) Electronic properties of cerium and the kondo volume-collapse model. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Ramesh, TG and Shubha, V (1986) High pressure studies on magnetic and nonmagnetic metallic glasses. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Ramesh Chandra, . and Viswanathan, KS and Gopalan, R (1985) Structural Testing of Radomes '3' and '4' Electronic Equipment Pod, Technical Report Part XI. Project Report. National Aerospace Laboratories, Bangalore.
Ranganathan, P and Amrutha, V and Barshilia, HC (2021) Thermal oxidation of stainless steel substrate with tunable spectral selectivity: Transition from a reflecting to a highly absorbing Cr–Fe spinel surface. Solar Energy Materials and Solar Cells, 233. ISSN 09270248
Rangaraj, L and Divakar, C and Jayaram, V (2009) Reactive Processing of Ceramic Composites at Moderate Temperatures. In: National Conference on Scientific Achievements of SC & ST Scientists and Technologists, 14-16 April 2009, Bangalore.
Rangaraj, L and Divakar, C and Jayaram, V (2010) Reactive hot pressing of ZrB2–ZrCx ultra-high temperature ceramic composites with the addition of SiC particulate. Journal of the European Ceramic Society, 30. pp. 3263-3266. ISSN 0955-2219
Rangaraj, L and Divakar, C and Jayaram, V (2004) Reactive hot pressing of titanium nitride-titanium diboride composites at moderate pressures and temperatures. Journal of the American Ceramic Society, 87 (10). pp. 1872-1878. ISSN 0002-7820
Rangaraj, L and Divakar, C and Vikram, Jayaram (2010) Fabrication and mechanisms of densification of ZrB2-based ultra high temperature ceramics by reactive hot pressing. Journal of the European Ceramic Society, 30 (1). pp. 129-138. ISSN 0955-2219
Rangaraj, L and Jayaprakash, S and Ushadevi, S and Venkataswamy, MA and Divakar, C and Singh, AK (2000) Simultaneous synthesis and sintering of TiB2-TiN composite at moderate pressures and Temperatures. In: Proceedings of V National Conference on High Pressure Science and Technology Advances in High Pressure Science and Technology, , Bangalore.
Rangaraj, L and Suresha, SJ and Divakar, C and Jayaram, V (2008) Low-temperature processing of ZrB2-ZrC composites by reactive hot pressing. Metallurgical and Materials Transactions A, 39A (7). pp. 1496-1505. ISSN 1073-5623
Rangaraj, L and Chakrabarti, T and Kannan, R and Jayaram, V (2016) Effect of applied pressure on densification of monolithic ZrCx ceramic by reactive hot pressing. Journal of Materials Research, 31 (4). pp. 506-515. ISSN 08842914
Rangaraj, L and Kashimatt, V and Pooja, P and Suresha, B (2022) Reaction, densification, and mechanical properties of Ti2AlCx ceramics at low applied pressure and temperature. International Journal of Applied Ceramic Technology, 19 (5). pp. 2807-2816. ISSN 1546542X
Rani, D and Rangaraj, L and Suresha, B and Venkateswarlu, K (2021) Influence of Ti3AlC2 Ceramic Particles in AZ91 Alloy: Produced by Melt Infiltration Method. Transactions of the Indian Institute of Metals, 74 (3). pp. 743-752. ISSN 09722815
Rao, R Ramachandra and Kannan, KS (2002) Synthesis and sintering of hydroxyapatitex2013;zirconia composites. Materials Science and Engineering C, 20 (1-2). pp. 187-193.
Rao, R Ramachandra and Roopa, HN and Kannan, TS (1993) Processing and characterisation of ceramic slurries Part I : Particle size distribution of ceramic particles in13; ceramic slurries. Technical Report. National Aerospace Laboratories, Bangalore, India.
Rao, RMVGK (2006) Nanomodified fibre reinforced polymer composites and adhesives: What needs to be done? In: ASME 2006 Multifunctional Nanocomposites International Conference (MN2006) , Sept 20–22, 2006 , Honolulu, Hawaii, USA.
Rao, RMVGK (1988) Plant irrigation using FRP porous tubes: Interim report to KSCST. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Rao, RMVGK and Balasubramanian, N (1984) Hygrothermal effects on the fracture of coated and uncoated polymer-composites. Advances in Fracture Research, 4. pp. 2989-2996.
Rao, RMVGK and Balasubramanian, N (1981) Moisture absorption phenomenon in permeable fiber polymer composites. Journal of Applied Polymer Science, 26. pp. 4069-4079. ISSN 0360-6834
Rao, RMVGK and Balasubramanian, N and Manas, Chanda (1984) Factors affecting moisture absorption in polymer composites. I - Influence of internal factors. II - Influence of external factors. Journal of Reinforced Plastics and Composites, 3. pp. 232-253.
Rao, RMVGK and Chanda, M and Balasubramanian, N (1983) A Fickian diffusion model for permeable fibre polymer composites. Journal of Reinforced Plastics and Composites, 2. pp. 289-299. ISSN 0731-6844
Rao, RMVGK and Chanda, Manas and Balasubramanian, N (1984) Factors Mfecting Moisture Absorption in Polymer Composites13; Part ll: Influence of External Factors. Journal of Reinforced Plastics and Composites, 3. pp. 246-253. ISSN 0731-6844
Rao, RMVGK and Kaushal, SC and Tankala, K (1991) Some hygrothermal effects on the mechanical behaviour and fractography of glass-epoxy composites with modified interface. Journal of Materials, 26. pp. 6293-6299.
Rao, RMVGK and Nahar, GA and Alagirusamy, R (2000) Mechanical properties of glass composites based on knitted preforms with inlays. Indian Journal of Fibre and Textile Research, 25. pp. 115-120. ISSN 0971-0426
Rao, RMVGK and Padma, A and Patel, HS (1992) Kinetic Studies on Epoxy Resins Cured with a Novel Polyamine. High Performance Polymer, 4 (1). pp. 41-48. ISSN 0954-0083
Rao, RMVGK and Padma, A and Subramaniam, C (1994) The structural modification of epoxy resins by a liquid elastomer. High Performance Polymer, 6 (1). pp. 71-81. ISSN 0954-0083
Rao, RMVGK and Pourassamy, A (1976) Studies on the curing of a loaded unsaturated polyester binder. Polymer, 17. pp. 611-612.
Rao, RMVGK et al. (2008) A process for shaping thermoplastic sheets for wing shields / Windows for vehicles using an unique using an unique vacuum technique. 216783.
Rao, RMVGK and Rajendra Prakash, M (1999) Comparative Evaluation Studies on Glass Micro (Imported) Vs-Erosil Powder (Indigeneous)used in the Development of Hansa Aircraft. Project Report. National Aerospace Laboratories, Bangalore.
Rao, Sandhya and Rao, RMVGK (2008) Cure studies on bifunctional epoxy matrices using a domestic microwave oven. Polymer Testing, 27 (5). pp. 645-652.
Rao, Sandhya and Rao, RMVGK (2003) IR radiation cure studies of Bi-functional epoxy resin systems. Project Report. National Aerospace LAboratories, Bangalore.
Rao, Subba M (2007) Composite Materials And Processes For Civil aircraft Structures. In: Symposium on Aircraft Design, Bangalore, India.
Rao, KV and Ananthapadmanabha, GS and Dayananda, GN (2016) Effect of Cross-linking Density on Creep and Recovery Behavior in Epoxy-Based Shape Memory Polymers (SMEPs) for Structural Applications. Journal of Materials Engineering and Performance, 25 (12). pp. 5314-5322. ISSN 10599495
Rao, R.R and Dange, E and UdayaKumar, A (2021) Synthesis and slurry spray coating of barium strontium alumino silicate on SiC substrate. Ceramics International, 47 (10). pp. 14913-14922. ISSN 02728842
Rao, RR and Roopa, HN and Mariappan, L (2016) Development of microporous scaffolds through slip casting of solution combustion derived nano hydroxyapatite. InterCeram: International Ceramic Review, 65 (3). pp. 100-105. ISSN 00205214
Rao, Sandhya and Vijapur, L and Prakash, M.Rajendra (2020) Effect of incident microwave frequency on curing process of polymer matrix composites. Journal of Manufacturing Processes, 55. pp. 198-207. ISSN 15266125
Rathod, VT and Mahapatra, D Roy and Jain, Anjana and Gayathri, A (2010) Characterization of large-area PVDF thin film for electro-mechanical and ultrasonic sensing applications. Sensors and Actuators A: Physical , 163. pp. 164-171. ISSN 0924-4247
Raveendranath, U and Ramesh, R and Venu, KS and Jha, RM (2002) EM Characterisation Studies for Quartz C-14 Material System. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Raveendranath, U and Venu, KS and Jha, RM (2001) Material Characterisation based Preliminary EM design of J-Radome. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Ravi, Kumar P and Sathish, Nimbal S and Sudheendra, HN and Subbarao, M (2009) Master process sheets for fabrication of CFC centre fuselage parts of TEJAS (Light Combat Aircraft): part-3. Technical Report. NAL.
Rawat, RS and Karuppannan, D and Dharmappa, BL and Subba Rao, M (2008) Development of a co-cured composite torque shaft for rudder of high speed aircraft. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-043), 26-28 Jun 2008, Bangalore, India.
Reddy, AJ and Krishna, RH and Nagabhushana, BM and Kokila, MK and Nagabhushana, H and Shivakumara, C and Chakradhar, RPS (2015) Synthesis, luminescence properties and EPR investigation of hydrothermally derived uniform ZnO hexagonal rods. Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy, 139. pp. 262-270. ISSN 13861425
Reddy, NS and Viswanathan, R and Chakradhar, RPS and Reddy, CN (2017) EPR and optical studies of microwave synthesized glasses containing VO2+ ions: Meta and pyrophosphate regime. Journal of Alloys and Compounds, 695. pp. 1368-1377. ISSN 09258388
Revathi, A and Prakash, M.Rajendra and Singh, AK and Mahale, Santhosh and Srihari, Shylaja and Rao, RMVGK (2004) Hot-Wet Property Characterisation of a High-Temperature Cured Glass–Epoxy Composite in Immersion Environment. Journal of Reinforced Plastics and Composites, 23 (17). pp. 1884-1892. ISSN 0731-6844
Revathi, A and Rao, RMVGK (2003) Fibre Weight Fraction Measurements on Travel Coupons of Nose Cone Radome for Jaguar Maritime Aircraft. Project Report. NAL, Bangalore.
Revathi, A and Sandhya, Rao and Kavitha, Rao V and Prakash, M.Rajendra and Murugan, M. Sendil and Shylaja, Srihari and Dayananda, GN (2014) Influence of temperature on tensile behavior of multiwalled carbon nanotube modified epoxy nanocomposites. Journal of Materials Research, 29 (15). ISSN 0884-2914
Revathi, A and Srihari, Shylaja and Rao, RMVGK (2004) Moisture Distribution Profiles in RT-Cured Glass/ Epoxy Laminates of Different Thicknesses. Journal of Reinforced Plastics and Composites, 23 (10). pp. 1075-1094. ISSN 0731-6844
Revathi, A and Sandhya, Rao and Kavitha, Rao V and Muralidhar, S and Sendil, Murugan M and Shylaja, Srihari and Dayananda, GN (2013) Effect of strain on the thermomechanical behavior of epoxy based Shape memory polymers. Journal of Polymer Research, 20 (5). pp. 1-10. ISSN 1022-9760
Revathi, A and Sandhya, Rao and Kavitha, Rao V and Rajendra Prakash, M and Sendil, Murugan M and Shylaja, Srihari and Dayananda, GN (2014) Influence of Temperature on Tensile behavior of MWCNT Modified Epoxy Nanocomposites. Journal of Materials Reserarch, 29 (15). pp. 1-7. ISSN 0884-2914
Revathi, A and Sendil, Murugan M and Sandhya, Rao and Chiranjeevi, MC and Kavitha, Rao V and Shylaja, Srihari and Dayananda, GN (2017) Investigations on tensile creep of CNT- epoxy shape memory polymer nanocomposites. International Journal of Nanotechnology, 14 (9-11). pp. 945-960. ISSN 1475-7435
Revathi, A and Sendil, Murugan M and Sandhya, Rao and Kavitha, Rao V (2016) Estimation of creep and recovery of CTBN-epoxy shape memory polymers under tensile loading. Indian Journal of Advances in Chemical Science. pp. 39-44. ISSN 2320-0928
Revathi, A and Sendil, Murugan M and Shylaja, Srihari and Jagannathan, N and Manjunatha, CM (2014) Effect of Hot-Wet Conditioning on the Mechanical and Thermal Properties of IM7/ 8552 Carbon Fiber Composite. Indian Journal of Advances in Chemical Science. pp. 84-88. ISSN 2320-0928
Richard, E and Anandan, C and Aruna, ST Fabrication of Superhydrophobic Zinc Stearate Hierarchical Surfaces from Different Precursors. Materials and Manufacturing Processes, 31 (9). pp. 1171-1176. ISSN 10426914
RizvanBasha, M and UdayaKumar, A and Stalin, M and Singh, S and Bhanu Prasad, VV and Sankaranarayanan, SR (2020) Vapour phase synthesis and characterisation of Cf/SiC composites with self-healing Si-B-C monolayer coating. Ceramics International, 46 (15). pp. 23785-23796. ISSN 02728842
Roopa, TS and Murthy, HNN and Harish, DVN and Jain, Anjana and Angadi, G (2020) Properties of PVDF films stretched in machine direction. Polymers and Polymer Composites. ISSN 09673911
Saha, M and Mukherjee, S and Bera, P and Seikh, M M and Gayen, A (2022) Structural, optical, dielectric, and magnetic properties of spinel MFe2O4 (M = Co and Zn) nanoparticles synthesized by CTAB-assisted hydrothermal method. Ceramics International, 48 (23). pp. 35719-35732. ISSN 02728842
Sahoo, B and Panda, PK (2007) Dielectric, ferroelectric and piezoelectric properties of13; (1 x2013; x)[Pb0.91La0.09(Zr0.60Ti0.40)O3]x2013;x[Pb(Mg1/3Nb2/3)O3],13; 0 xA3; x xA3; 1. Journal of Materials Science, 42:. pp. 4270-4275.
Sahoo, B and Panda, PK (2007) Effect of CeO2 on dielectric, ferroelectric and piezoelectric13; properties of PMNx2013;PT (67/33) compositions. Journal of Materials Science, 42. pp. 4745-4752.
Sahoo, B and Panda, PK (2007) Ferroelectric, dielectric and piezoelectric properties13; of Pb1x2013;xCex(Zr0.60Ti0.40)O3, 0 xA3; x xA3; 0.08. Journal of Materials Science, 42. pp. 9684-9688.
Sahoo, PK and Manjunatha, CM and Dattaguru, B (2008) Failure prediction of adhesively bonded lap joints between metal and composite adherends. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-096), 26-28 Jun 2008, Bangalore, India.
Sahoo, PK and Manjunatha, CM and Dattaguru, B (2007) Finite element analysis of adhesively bonded lap joints and estimation of shear strength. In: International Conference on Recent Advances in Composite Materials (ICRACM-2007), 20-23 Feb 2007, New Delhi, India.
Sahoo, B and Panda, P K and Ramakrishna, S (2022) Electrospinning of functional ceramic nanofibers. Open Ceramics, 11. pp. 1-16. ISSN 26665395
Sahoo, B and Panda, PK (2015) Electronic Properties of Lead-Free (Ba0.95Ca0.05)(Ti0.92Sn0.08)O3 Piezoceramic Nanofibers by Electrospinning. Journal of Electronic Materials, 44 (11). pp. 4563-4566. ISSN 03615235
Sahoo, B and Thejas, TS and Politova, ED and Panda, PK (2021) Effect of dopants on electrical properties of BCT-BZT lead free piezo ceramics: a review. Ferroelectrics, 582 (1). pp. 46-62. ISSN 00150193
Sahoo, PK and Dattaguru, B and Manjunatha, CM (2017) Strength Prediction of Adhesively Bonded Joints using Plastic Zone Size Criterion. In: Procedia Engineering.
Sahoo, PK and Dattaguru, B and Manjunatha, CM and Murthy, CRL (2012) Fatigue de-bond growth in adhesively bonded single lap joints. Sadhana, 37. pp. 79-88. ISSN 0973-7677
Saikrishna, CN and Ramaiah, KV and Paul, D and Bhaumik, SK (2016) Enhancement in fatigue life of NiTi shape memory alloy thermal actuator wire. Acta Materialia, 102. pp. 385-396. ISSN 13596454
Sainathan, N and Padmanabhan, K and Sashidhara, S and Rao, RMVGK and Kishore, - (1995) Influence of Particulate Graphite Additions on the Shear Related Behaviour of Glass Fabric Reinforced Epoxy Composites. Journal of Reinforced Plastics and Composites, 14. pp. 445-457. ISSN 0731-6844
Saji, D and Varughese, Byji and Pradhan, SC (2008) Finite element analysis for thermal buckling behaviour in functionally graded plates with cut-outs. In: Proceedings of the International conference on Aerospace Science and Technology (INCAST 2008-113), 26-28 Jun 2008, Bangalore, India.
Sajjan, Sangeetha S and Nair, RU and Jha, RM (2009) Electromagnetic Characterization Techniques for Chiral Media. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Sakthi Sathya, P S and Jain, Saransh and Viswamurthy , SR and Kotresh, Gaddikeri M and Ramesh, Sundaram (2011) Prediction of Strains in the Debond Region of a Composite Box Structure. In: National Conference on Advances in Composites & Solid Mechanics, 7-8 December 2011, Sardar Vallabhai Patel Institute of Technology, Vasad, Gujarat.
Salem, Stanley C and Gowda, MNN and Ramachandra, HV and Kamath, GM and Subbarao, M (2007) Development of cglare: Design, fabrication and characterisation. In: Proceedings of the National Seminar INCCOM-6 on future trends in Composite Materials and Processing, Dec 2007, Kanpur, India.
Samiullah, TH and Prakash, M.Rajendra and Murugan, Sendil M and Rao, RMVGK (2006) HANSA-3 aircraft series productionisation program - Damage repairs. Project Report. National Aerospace Laboratories, Bangalore.
Samiullah, TH and Prakash, M.Rajendra and Rao, RMVGK (2006) Mechanical design data generation for wind mill turbine blade-11.5 mts (300 KW). Project Report. National Aerospace Laboratories, Bangalore.
Samiullah, TH and Prakash, M.Rajendra and Rao, RMVGK (2006) Quality monitoring of Mark-II doppler weather radar (DWR) radome panels. Project Report. National Aerospace Laboratories, Bangalore.
Samiullah, TH and Rao, RMVGK (2003) Development of a 7sq.m large PUF core panel for realization of Mark-I1 Radome for DWR. Project Report. National Aerospace LAboratories, Bangalore.
Samiullah, TH and Rao, RMVGK (2003) Pattern and Tooling Development for the Radome Fairings (TDF & ADF ) for HOMI TU- 142M Aircraft. Project Report. National Aerospace Laboratories, Bangalore.
Sandeep, DN and Sugun, BS (2012) 3D WEAVING POSSIBILITIES ON AN 8 SHAFT LOOM. In: ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, 24-28 June 2012, Venice, Italy.
Sandeep, DN and Sugun, BS and Kundan , K Verma and Shwetha, SN and Ashwathi, T and Anantha , Krishnan (2014) Development of 3D Angle-Interlock Woven Preforms for Composites. In: ISAMPE- INCCOM-13, 14 Nov 2014, Vikram Sarabhai Space Centre, Trivandrum.
Sandhya, Rao and Chiranjeevi, MC (2015) Microwave curing of glass-epoxy composites using silica based moulds. Journal of Polymer and Composites, 3 (2). pp. 52-57.
Sane, A. and Peshwe, D.R. and Manjunatha, CM and Padole, P.M. and Uddanwadiker, R.V. Evaluation of Progressive Failure of Composite T-Joint Using Mixed Mode Cohesive Zone Model. Transactions of the Indian Institute of Metals, 71 (2). pp. 445-451. ISSN 09722815
Sane, AU and Padole, PM and Manjunatha, CM and Uddanwadiker, RV and Jhunjhunwala, P (2018) Mixed mode cohesive zone modelling and analysis of adhesively bonded composite T-joint under pull-out load. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40 (3). ISSN 16785878
Sanjeev Kumar, S and Ramanaiah, B and Sudheendra, HN and Kamath, GM and Subba Rao, M (2006) Application of Acoustic Emission to Study Debond Growth in Co-cured/Co-bonded Composite Structures under Fatigue Loading. In: Proceedings of the 14th National Seminar on Aerospace Structures: Fatigue, Fracture and Ageing Structures, 30-31 Jan 2006, Nagpur, India.
Sanjeev Kumar, S and Senthil Kumar, P and Ramanaiah, B and Sudheendra, HN (2008) Acoustic Emission Studies of Bearing Failure in Composites. In: Proceedings o the ISAMPE National Conference on Composite:INCCOM-7, 4-5, December 2008, Bangalore, India.
Sanjeev Kumar, S and Senthil Kumar, P and Ramesh Kumar, M (2008) Development of Facility for evaluating Characteristics of Ultrasonic Transducers. Project Report. National Aerospace Laboratories, Bangalore.
Sanjeev Kumar, S and Senthil Kumar, P and Ramesh Kumar, M and Sudheendra, HN (2008) Development of a facility for evaluating characteristics of ultrasonic transducers. Technical Report. NAL.
Santhana Krishnan, G and Naveen, S and Shahnawaz, M and Ramcharan, T (2022) Pyrolysis and thermal degradation studies of silane-carbosilane transformation using hyphenated thermal analysis. Journal of Analytical and Applied Pyrolysis, 164. ISSN 01652370
Santhana Krishnan, G and Ramcharan, T and Ramachandra Rao, R and Naveen, S (2021) Polymer-derived silicon carbide micro powders through selective solvent precipitation of high molecular weight polycarbosilane. Ceramics International, 47 (12). pp. 17502-17509. ISSN 02728842
Santhana Krishnan, G and Shahnawaz, M and Ramcharan, T (2022) Thermal Aspects of Kumada Rearrangement in Symmetrical and Asymmetrical Polysilanes-Interdependence of Molecular Structure, Thermal Degradation, and Stability. Silicon, 15. pp. 1499-1510. ISSN 1876990X
Santhana Krishnan, G and Thomas, P and Naveen, S and Murali, N (2018) Molecular and thermal studies of carbon fiber precursor polymers with low thermal-oxidative stabilization characteristics. Journal of Applied Polymer Science, 135 (25). pp. 1-15. ISSN 00218995
Sathish, S and Balaji, N and Manivasagam, G and Aruna, STR (2021) Properties of Plasma Sprayed Al2O3-13TiO2 and ZrO2 Blended Coatings on Biomedical Alloy. Transactions of the Indian Ceramic Society, 80 (3). 216 -223. ISSN 0371750X
Sathiya Naarayan, S and Dhayanidhi, J and Nagarajappa, B and Vorkady, Y and Chandra, S (2015) Behavior of organic gelatin/phenolic micro balloon composite under compressive loading, static and low velocity impact. Indian Journal of Engineering and Materials Sciences, 22 (6). pp. 618-630. ISSN 09714588
Sathyanarayana, CN and Raja, S and Durai Arun, P and Mahesh, M and Aparna, BR (2022) Lamb Wave Propagation and Low Velocity Impact Damage Identification in Carbon Fiber Reinforced Plastic (CFRP) Laminates. In: MysuruCon 2022 - 2022 IEEE 2nd Mysore Sub Section International Conference, 16-17 October 2022, Mysuru, India.
Satish, Chandra and Ramachandra, S and Kamath, GM and Karthikeyan, K and Dhayanidhi , J and Vijay, Petley and Ramanaiah, B and Salem, Stanley C and Gowda, MNN and Subbarao, M (2007) Experimental investigations on composite, fibre-metal and metal coupons for high velocity bird impacts. In: 15th National Conference on Aerospace Structures, 15-16 Oct 2007, Coimbatore, Tamil Nadu, India.
Segun, BS and Rao, RMVGK (2000) Drop Weight Impact Studies on Rib-Knit RTM Laminates. Journal of Reinforced Plastics and Composites, 19 (06). pp. 492-508. ISSN 0731-6844
Sellarajan, B and Kulkarni, PD and Krishnan, M and Nagaraja, HS and Barshilia, Harish C and Chowdhury, P (2013) Effective magneto-crystalline anisotropy in ordered Co nanowire array. In: IUMRS-ICA-2013, 16 Dec 2013, IISc, Bangalore.
Sellarajan, B and Saravanan, P and Ghosh, SK and Nagaraja, HS and Barshilia, Harish C and Chowdhury, P (2018) Shape induced magnetic vortex state in hexagonal ordered cofe nanodot arrays using ultrathin alumina shadow mask. Journal of Magnetism and Magnetic Materials, 451. pp. 51-56. ISSN 03048853
Sellarajan, B and Sharma, Megha and Ghosh, SK and Nagaraja, HS and Barshilia, Harish C and Chowdhury, P (2016) Effect of electrolyte temperature on the formation of highly ordered nanoporous alumina template. Microporous and Mesoporous Materials, 224. pp. 262-270. ISSN 13871811
Sellarajan, Boominatha and Nagaraja, HS and Barshilia, Harish C and Chowdhury, P (2016) Effect of shape and magnetocrystalline anisotropies in ordered Co nanorod arrays with smaller diameter. Journal of Magnetism and Magnetic Materials, 404. pp. 197-204. ISSN 03048853
Selva Kumar , N and Barshilia, Harish C and Krupanidhi, SB (2013) Studies on hot-filament chemical vapor deposition grown graphene sheets. In: IUMRS-ICA 2013, 16 Dec 2013, IISc, Bangalore.
SelvaKumar, M and Chandrasekar, P and Mohanraj, M and Ravisankar, B and Balaraju, JN (2015) Role of powder metallurgical processing and TiB reinforcement on mechanical response of Ti-TiB composites. Materials Letters, 144. pp. 58-61. ISSN 0167577X
Selvakumar, N and Mohamed, MJS and Narayanasamy, R and Venkateswarlu, K (2013) Forming limit diagram and void coalescence analysis of AA5052 coated with molybdenum-based ceramic nanocomposites. Materials and Design, 52. pp. 393-403. ISSN 0261-3069
Selvakumar, N and Biswas, A and Rao, DVS and Krupanidhi, SB and Barshilia, Harish C (2016) Role of component layers in designing carbon nanotubes-based tandem absorber on metal substrates for solar thermal applications. Solar Energy Materials and Solar Cells, 155. pp. 397-404. ISSN 09270248
Selvakumar, N and Karthik, G and Jayaraj, S and Barshilia, Harish C (2021) Sprayable PEDOT:PSS based spectrally selective coating for solar energy harvesting. Solar Energy Materials and Solar Cells, 221. ISSN 09270248
Selvakumar, N and Pradhan, U and Krupanidhi, SB and Barshilia, Harish C (2016) Structural and optical properties of graphene oxide prepared by modified hummers' method. Computers, Materials and Continua, 52 (3). pp. 173-184. ISSN 15462218
Selvakumar, N and Vadivel, B and Rao, DVS and Krupanidhi, SB and Barshilia, Harish C (2016) Controlled growth of high-quality graphene using hot-filament chemical vapor deposition. Applied Physics A: Materials Science and Processing, 122 (11). pp. 1-11. ISSN 09478396
Senthil Kumar, P and Dayananda, GN (2008) High Frequency Actuation and Strain Rate Effects on Thin Shape Memory Alloy Wires. Project Report. National Aerospace Laboratories, Bangalore.
Senthil Kumar, P and Dayananda, GN and Kamalakannan, GM and Saji, D and Pruthvi, S and Subba Rao, M (2006) Preliminary Design and Fabrication Report on Repair Technology using Smart Actuators. Project Report. National Aerospace Laboratories, Bangalore.
Senthil Kumar, P and Dayananda, GN and Saji, D and Kamalakannan, GM and Subba Rao, M (2008) Aircraft Structural Repair Technology Using Smart Actuators. Project Report. National Aerospace Laboratories, Bangalore.
Senthil Kumar, P and Jayasankar, S and Kamaleshaiah, MS and Satisha, - and Prashanth, NS and Alfred Paul, Singh (2010) Wind Tunnel Testing of SMA Actuated Trim-Tab for Hansa Aircraft. Project Report. National Aerospace Laboratories, Bangalore.
Senthil Kumar, P and Kamath, GM (2008) Active Vibration Control of Model Support Structures for Wind Tunnel Applications. Project Report. National Aerospace Laboratories, Bangalore.
Senthil Kumar, P and Kamath, GM and Subba Rao, M (2007) Signal Processing and Spectral AnaTysTs Using dSPACE DS1102 DSP Board. Project Report. National Aerospace Laboratories, Banglaore.
Senthil Kumar, P and Manikandan, R (2007) Development of Closed Loop Temperature Control System for Composite Repair in LabVIEW Environment. Project Report. National Aerospace Laboratories, Bangalore.
Senthil Kumar, S and Jayaram, V and Aruna, ST (2021) Enhanced power density in hydrocarbon-compatible anode-supported solid oxide fuel cell facilitated by a functional anode catalyst layer. Nanomaterials and Energy, 10 (2). 118 -127. ISSN 20459831
Senthil Kumar, S and Jayarama, V and Aruna, ST (2020) Co-fired anode-supported solid oxide fuel cell for internal reforming of hydrocarbon fuel. Energy, Ecology and Environment, 6. pp. 55-68. ISSN 23637692
Shabaze, M and Sahoo, PK and Jagannatha Guptha, VL (2019) Multiscale material modelling and analysis of carbon fiber/MWCNT/ epoxy composites to predict effective elastic constants. In: Part of special issue: 1st International Conference on Manufacturing, Material Science and Engineering.
Shankar, PN and Kumar, M (1995) Vortex rings generated by drops just coalescing with a pool. Physics of Fluids, 7 (4). pp. 737-746. ISSN 1070-6631
Shanmugam, C and Sivasubramanian,, G and Govindhan, P and Bera, Parthasarathi and Baskaran, K and Parameswaran, V R I (2022) Antimicrobial and Free Radical Scavenging Activities of Cellulose/Silver-Nanocomposites with In Situ Generated Silver Nanoparticles Using Cissampelos Pareira Leaf Extract. Journal of Cluster Science, 33 (4). pp. 1727-1737. ISSN 10407278
Sharma, Megha and Thomas, Ann Nimmy and Chowdhury, P and Barshilia, Harish C (2013) Heat generation analysis and anode temperature measurement during the formation of nanoporous aluminium oxide. In: IUMRS 2013, 16 Dec 2013, IISc, Bangalore.
Shetty, MR and Vijay Kumar, KR and Sudhir, S and Raghu, P and Madhuranath, D and Rao, RMVGK (1999) Effect of Fibre Orientation on Mode-I13; Interlaminar Fracture Toughness of Glass13; Epoxy Composites. Journal of Reinforced Plastics and Composites, 16. pp. 1-15. ISSN 0731-6844
Shetty, K and Manjunatha, CM and Gururaja, S and Srihari, Shylaja (2022) Hot-Wet Environmental Effects on In-Plane Shear Strength of IMA/M21E Aircraft Grade CFRP Composites. In: Structural Integrity Conference and Exhibition, Singapore.
Shetty, K and Srihari, Shylaja and Manjunatha, CM (2019) Effect of hygrothermal aging on the interlaminar shear strength of a carbon fibre composite. In: 2nd International Conference on Structural Integrity and Exhibition 2018.
Shireesha , G and Manjunatha, C and Jain, Anjana and Radhakrishna, MC (2013) Preparation and characterization of Poly(vinylidenefluoride)-CdSiO3 nanocomposite thin films. In: Workshop on Advanced materials manufacturing management and thermal studies, 3 May 2013, Tumkur.
Shri Prakash, B and Balaji, N and Senthil Kumar, S and Aruna, ST (2016) Microstructure and Polarization Studies on Interlayer Free La0.65Sr0.3Co0.2Fe0.8O3– δ Cathodes Fabricated on Yttria Stabilized Zirconia by Solution Precursor Plasma Spraying. Fuel Cells, 16 (5). pp. 617-627. ISSN 16156846
Shubha, M and Vijayan, Kalyani (1989) X-ray analysis of heat-treated KEVLAR fibres. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Shubha, V and Ramesh, TG (1987) Controller for stabilization of high voltage. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Shubha, V and Ramesh, TG (1995) Fabrication of Thermo power Analyser for High Temperature Studies. Technical Report. National Aerospace Laboratories, Bangalore, india.
Shubha, V and Ramesh, TG (1988) Lovv temperature Set Up for Absolute TEP measurement13;. Technical Report. National Aeronautical Laboratory, Bangalore,India.
Shukla, Arvind and Rao, RMVGK (1984) Curing Studies on Modified Epoxy and Unsaturated Polyester Resins. Journal of Applied Polymer Science, 29. pp. 1553-1558. ISSN 0360-6834
Shuresh Chand, Jangir and Srinivasa, V and Ramachandra, HV and Ramesh Kumar, M and Sudheendra, HN (2009) Qualification of composite components of tejas (LCA): non-destructive evaluation. Technical Report. NAL.
Shyam, - and Srinivas, MS and Gajrani, KK and UdayaKumar, A and Sankar, MR (2021) Sustainable Machining of Cf/SiC Ceramic Matrix Composite Using Green Cutting Fluids. In: 28th CIRP Conference on Life Cycle Engineering,, March 10-12, 2021, Jaipur.
Sibin, K P and Selvakumar, N and Kumar, A and Dey, A and Sridhara, N and Shashikala, HD and Sharma, AK and Barshilia, Harish C (2017) Design and development of ITO/Ag/ITO spectral beam splitter coating for photovoltaic-thermoelectric hybrid systems. Solar Energy, 141. pp. 118-126. ISSN 0038092X
Sibin, K.P. and Mary Esther, A.C. and Shashikala, H.D. and Dey, A. and Sridhara, N. and Sharma, A.K. and Barshilia, H.C. (2018) Environmental stability of transparent and conducting ITO thin films coated on flexible FEP and Kapton® substrates for spacecraft applications. Solar Energy Materials and Solar Cells, 176. pp. 134-141. ISSN 09270248
Siddaramappa, M and Latha, HKE and Lalithamba, HS and UdayaKumar, A (2021) The effect of tin concentration on microstructural, optical and electrical properties of ito nanoparticles synthesized using green method. Iranian Journal of Materials Science and Engineering, 18 (4). pp. 1-12. ISSN 17350808
Simimol, A and Aji, A and Chowdhury, P and Dhara, S and Barshilia, Harish C (2013) Enhanced defect emission in Co doped ZnO nanorods synthesized by electrochemical route. In: IUMRS 2013, 16 Dec 2013, IISc, Bangalore.
Simimol, A and Anappara, AA and Barshilia, Harish C (2017) Influence of defects on electrical properties of electrodeposited Co-doped ZnO nanocoatings. Materials Research Express, 4 (1). ISSN 20531591
Simimol, A and Anappara, AA and Greulich-Weber, S and Chowdhury, P and Barshilia, Harish C (2015) Enhanced room temperature ferromagnetism in electrodeposited Co-doped ZnO nanostructured thin films by controlling the oxygen vacancy defects. Journal of Applied Physics, 117 (21). pp. 1-10. ISSN 00218979
Sindhu, BR and Raju, J and Kamath, K (2020) A Comparative Analytical study of Standard Composite Double Cantilever Beam using Virtual Crack Closure Technique and Cohesive Zone Modelling method. In: Materials Today: Proceedings.
Sindhu, BR and Raju, J and Kamath, K (2019) A comparative numerical study of standard 3D composite plate using virtual crack closure technique and cohesive zone modelling method. In: IOP Conference Series: Materials Science and Engineering, 12-13 April 2019, Coimbatore, Tamil Nadu, India.
Singh, AK (1993) Analysis of C60 Fullerite Compression Under Non-Hydrostatic Pressure. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Singh, AK (1993) The Lattice Strains in a Specimen (Cubic System) Compressed Non Hydrostatically in an opposed Anvil Device. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Singh, AK and Kennedy, GC (1975) Compressibility of selenium glass to 5 GPa. Journal of Applied Physics, 46 (9). pp. 3861-3865.
Singh, Akansha and Viswamurthy , SR (2011) Interlaminar Fracture Toughness Characterization of Unidirectional Carbon Fiber Reinforced Epoxy Composites. Project Report. CSIR-NAL, Bangalore.
Singh, Hema and Nair, RU and Jha, RM (2006) Phased Array Analysis and Material Characterization Studies for AEW&C Radome. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Singh, KL and Manjunatha, CM and Venkata, NM (2006) Modeling and stress analysis of stiffened carbon fiber composite panels. In: Proceedings of National Seminar on Composites INCCOM-5, ISAMPE, 24-25 Nov 2006, Hyderabad, India.
Singh, KL and Ranganath, VR and Manjunatha, CM (2013) Numerical and experimental analysis to predict the compressive strength of pristine composite laminates. Journal of of Aerospace Sciences and Technologies, 65 (1). pp. 1-8.
Singh, S and Singh, V and Kumari, S and UdayaKumar, A and Bhanu prasad, VV (2019) A comparative study of tensile strength of Cf/SiC composites having single layer and multilayer interphases. Ceramics International, 45 (17). pp. 21193-21199. ISSN 02728842
Singh, S and Singh, V and Kumari, S and Udayakumar, A and Bhanu Prasad, V.V (2021) High-temperature flexural strength of I-CVI processed Cf/SiC composites with variable interphases. Journal of the European Ceramic Society, 41 (1). pp. 130-135. ISSN 09552219
Sinha, RP and Jarali, Chetan S and Raja, S (2011) Modelling the thermomechanical behaviour of shape memory polymer materials. Indian Journal of Engineering and Materials Sciences, 18. pp. 15-23. ISSN 0971-4588
Sivagnanapalani, P and Ansari, NI and Panda, PK (2021) Calcium Bismuth Titanate with High Curie Temperature (Tc) for High-Temperature Sensor Applications. Journal of Electronic Materials, 50 (8). pp. 4806-4811. ISSN 03615235
Sivagnanapalani, P and Ansari, NI and Panda, PK (2021) Nd2Ti2O7 (NTO) with high curie temperature (TC) for high temperature sensor applications. Sensors International, 2. ISSN 26663511
Sivagnanapalani, P and Panda, P K (2022) Samarium titanate (Sm2Ti2O7) materials for high-temperature sensor applications. Sensors International, 3. pp. 1-4. ISSN 26663511
Sivasankaram, K (1993) Advanced ceramics - application prospects in engines. Project Report. National Aerospace Laboratories, Bangalore.
Sowmya, B and Hemavathi, AB and Panda, PK (2021) Poly (ε-caprolactone)-based electrospun nano-featured substrate for tissue engineering applications: a review. Progress in Biomaterials, 91 (117). pp. 91-117. ISSN 21940509
Sowmya, B and John, A and Panda, PK (2021) A review on metal-oxide based p-n and n-n heterostructured nano-materials for gas sensing applications. Sensors International, 2. pp. 1-19. ISSN 26663511
Sowmya, B and Panda, P K (2022) Fabrication and characterization of super-hydrophilic poly (ε-caprolactone)/hydroxypropyl methylcellulose (HPMC) based composite electrospun membranes for tissue engineering applications. Progress in Biomaterials. ISSN 21940509
Sreedhar, M and Reddy, IN and Bera, Parthasarathi and Ramachandran, D and Gobi Saravanan, K and Rabel, AM and Anandan, C and Kuppusami, P and Brijitta, J (2015) Cu/TiO2 thin films prepared by reactive RF magnetron sputtering. Applied Physics A: Materials Science and Processing, 120 (2). pp. 765-773. ISSN 09478396
Sreedhara, H and Dineshkumar, H and Ranganath, VR (2021) Experimental Evaluation of Laminated Carbon Composite Step Lap Repair Through Static and Fatigue Compression Loading. In: Fracture Failure Analysis of Fiber Reinforced Polymer Matrix Composites. Engineering Materials . Springer Science and Business Media B.V., Singapore, pp. 85-106.
Sreevidya, PV and Borole, UP and Gawade, T and Khan, Jakeer and Prajapat, C.L. and Kumar, Y and Barshilia, Harish C and Chowdhury, P (2019) Evolution of magnetoresistance behaviour at low temperatures in naturally oxidised specular spin valve systems. Journal of Magnetism and Magnetic Materials, 481. pp. 170-175. ISSN 03048853
Sreevidya, PV and Khan, Jakeer and Barshilia, Harish C and Ananda, CM and Chowdhury, P (2018) Development of two axes magnetometer for navigation applications. Journal of Magnetism and Magnetic Materials, 448. pp. 298-302. ISSN 03048853
Sridhar, MK and Basavarajappa, G and Balasubramanian, N (1979) Control of crack propagation in metals by the use of composites. In: Proceedings of the International Conference on Fracture Mechanics in Engineering Application, 26-30 Mar 1979, Bangalore, India.
Sridhar, MK and Basavarappa, G and Kasturi, SG and Balasubramanian, N (1984) Mechanical properties of jute polyester composites.13;. Indian Journal of Technology, 22 (6). pp. 213-215.
Sridhar, MK and Subramaniam, Iyer and Ajay, Chandra and Singh, AK (1985) Acoustic emission monitoring of Iosipescu shear test on glass fibre-epoxy composites. In: 2nd International Conference on Acoustic Emission, Bangalore, India.
Srihari, Shylaja and Rao, RMVGK (1999) Hygrothermal Characterization and Diffusion Studies on Carbon/Epoxy composites. Journal of Reinforced Plastics and Composites, 18 (10). pp. 921-930. ISSN 0731-6844
Srihari, Shylaja and Rao, RMVGK (1999) Hygrothermal Charactrisation and DiffusionStudies on Glass Epoxy Composites. Journal of Reinforced Plastics and Composites, 18 (10). pp. 942-953. ISSN 0731-6844
Srihari, Shylaja and Rao, RMVGK (1999) Hygrothermal characterization and diffusion studies on carbon /epoxy composites. Journal of Reinforced Plastics and Composites, 18 (10). pp. 921-930. ISSN 0731-6844
Srihari, Shylaja and Revathi, A and Murugan, M. Sendil and Rao, RMVGK (2005) Environmental Conditioning Composites and Components for Aerospace and Allied Fields. Project Report. National Aerospace Laboratories, Bangalore.
Srihari, Shylaja and Revathi, A and Prakash, M.Rajendra and Samiullah, TH and Murugan, Sendil M and Rao, RMVGK (2006) Qualification Approach for Airborne Radomes (TDF Antenna Fairings (Radomes) of TU-142M aircraft). Project Report. National Aerospace Laboratories, Bangalore.
Srihari, Shylaja and Revathi, A and Rao, RMVGK (2002) Hygrothermal Effects on RT-Cured Glass-Epoxy Composites in Immersion Environments. Part A: Moisture Absorption Characteristics. Journal of Reinforced Plastics and Composites, 21 (11). pp. 983-993. ISSN 0731-6844
Srihari, Shylaja and Vanaja, A and Prakash, M.Rajendra and Sugun, BS and Revathi, A and Kavitha, - and Rao, Sandhya and Murugan, Sendil M and Chandrakala, - and Rao, RMVGK (2007) Industrial Test Services - COMPAC Program. Technical Report. National Aerospace Laboratories, Bangalore, India.
Srihari, Shylaja and Vanaja, A and Prakash, M.Rajendra and Sugun, BS and Revathi, A and Kavitha, - and Rao, Sandhya and Murugan, Sendil M and Chandrakala, - and Rao, RMVGK (2006) Industrial test services COMPAC Programme. Project Report. National Aerospace Laboratories, Bangalore.
Srihari, Shylaja and Vanaja, A and Rajendra Prakash, M and Sugun, BS and Revathi, A and Kavitha, and Sandhya, Rao and Sendil, Murgan and Chandrakala, - and Venkatasubramanyam, DV (2008) A Report on Industrial Test services under COMPAC Program from 2007-2008. Project Report. National Aerospace Laboratories, Bangalore.
Srikanth, L and Rajendra Prakash, M and Sateesh, VL and Dayananda, GN (2011) Experimental studies On Glass Microballoon Filled Epoxy Composites. Project Report. National Aerospace Laboratories, Bangalore.
Srikanth, L and Rao, RMVGK (2011) Concurrent studies on Braided and Filament wound carbon fibre composites - a comparative appraisal. Concurrent studies on braided and filament wound carbon fibre composites - a comparative appraisal, 30 (16). pp. 1359-1365.
Srikari Tantri, P and Sheela, K Ramasesha (1998) Synthesis and Properties of Molybdenum Disilicide Based Composites. Technical Report. National Aerospace Laboratories, Bangalore, India.
Srinivas, CK and Jha, RM (2006) Materials and Coatings for IR Signature Reduction. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Srinivasa, V and Sanjeev Kumar, S and Ramesh Kumar, M and Sudheendra, HN and Madhava, MR (2009) Non-Destructive Evaluation—A Pivotal Technology for Qualification of Composite Aircraft Structures. In: National Conference on Scientific Achievements of SC & ST Scientific & Technologists, 14-16 April 2009, Bangalore.
Srinivasan, C and Balasingh, C and Singh, AK (1979) Measurement of thickness of thin films by the x-ray diffraction method. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Sripad, S and Jayanth Kumar, S and Jain, Anjana (2015) Energy storage and management in supercapacitors for application in piezoelectric energy harvesting systems. International Journal of ChemTech Research, 7 (3). pp. 1118-1124. ISSN 09744290
Srivastava, Meenu and Balaraju, JN and Rajam, KS (2010) Improvement in the properties of nickel by nano-Cr2O3 incorporation. Surface and Coatings Technology, 205. pp. 66-75. ISSN 0257-8972
Srivastava, Meenu and Balaraju, JN and Ravisankar, B and Anandan, C and William Grips, VK (2012) High temperature oxidation and corrosion behaviour of Ni/Ni-Co-Al composite coatings. Applied Surface Science, 263. pp. 597-607. ISSN 0042-207X
Srivastava, Meenu and Siju, - and Balaraju, JN and Ravisankar, B (2015) Development and High Temperature Property Evaluation of Ni-Co-Cr-Al Composite Electroforms. Journal of Materials Engineering and Performance, 24 (5). pp. 1937-1944. ISSN 1059-9495
Srivastava, Meenu and William Grips, VK and Jain, Anjana and Rajam, KS (2007) Influence of SiC particle size on the structure and tribological properties of Ni-Co composites. Surface and Coatings Technology, 202. pp. 310-318. ISSN 0257-8972
Srivastava, Meenu and William Grips, VK and Rajam, KS (2007) Effect of CO on S13N4 incorporation and properties of electrodeposited NI. In: International and INCCOM-6 Conference on Future trends on Composite Materials and Processing, 12-14 Dec 2007, IIT, Kanpur, India.
Srivastava, Meenu and William Grips, VK and Rajam, KS (2007) Electrochemical Deposition and Tribological Behaviour of Ni and Ni-Co Metal Matrix composites with SiC nano-particles. Applied Surface Science, 253. pp. 3814-3824. ISSN 0042-207X
Srivastava, Meenu and William Grips, VK and Rajam, KS (2006) Electrochemical deposition of NI/SIC and NI-CO/SIC nano-composites. In: National Symposium on Electrochemical Science and Technology (NSEST-2006), 21-22 Jul 2006, Bangalore, India.
Srivastava, Meenu and William Grips, VK and Rajam, KS (2010) Electrodeposition of Ni–Co composites containing nano-CeO2 and their structure, properties. Applied Surface Science, 257 (3). pp. 717-722. ISSN 0042-207X
Srivastava, Meenu and William Grips, VK and Rajam, KS (2009) Influence of Co on Si3N4 incorporation in electrodeposited Ni. Journal of Alloys and Compounds, 469. pp. 362-365. ISSN 0925-8388
Srivastava, Meenu and William Grips, VK and Rajam, KS (2008) Influence of SiC, Si3N4 and Al2O3 particles on the structure and properties of electrodeposited Ni. Materials Letters, 62. pp. 3487-3489. ISSN 0167-577X
Srivastava, Meenu and William Grips, VK and Rajam, KS (2008) Structure and properties of electrodeposited Ni-Co-YZA composite coatings. J Appl Electrochem, 38 (5). pp. 669-677. ISSN 1572-8838
Srivastava, Meenu and Bera, Parthasarathi and Balaraju, JN and Ravisankar, B (2016) FESEM and XPS studies of ZrO2 modified electrodeposited NiCoCrAlY nanocomposite coating subjected to hot corrosion environment. RSC Advances, 6 (110). pp. 109083-109090. ISSN 20462069
Srivastava, Meenu and Chaudhuri, A and Bera, Parthasarathi and Ravisankar, B and Balaraju, JN (2021) Characterization of electrodeposited zirconia modified nicocraly composite coatings isothermally oxidized at 1000c. Surface Review and Letters, 28 (3).
Srivastava, Meenu and Jadhav, M and Chetan, Kumar and Chakradhar, RPS and Muniprakash, M and Singh, S (2019) Synthesis and properties of high velocity oxy-fuel sprayed FeCoCrNi2Al high entropy alloy coating. Surface and Coatings Technology, 378. ISSN 02578972
Srivastava, Meenu and Jadhav, M S and Chethan, - and Chakradhar, R P S and Singh, s (2022) Investigation of HVOF sprayed novel Al1.4Co2.1Cr0.7Ni2.45Si0.2Ti0.14 HEA coating as bond coat material in TBC system. Journal of Alloys and Compounds, 924 (30). ISSN 09258388
Srivastava, Meenu and Siju, - and Balaraju, JN and Ravisankar, B (2015) Development and High Temperature Property Evaluation of Ni-Co-Cr-Al Composite Electroforms. Journal of Materials Engineering and Performance, 24 (5). pp. 1937-1944. ISSN 10599495
Sruthi, S and Adarsh, A and Veronica, A and Saideep, M and Dutta, Soma (2016) Thickness dependent mechanical and ferroelectric properties of Bi4Ti3O12 film. Journal of Materials Science: Materials in Electronics, 27 (4). pp. 4062-4067. ISSN 09574522
Stalin, M and Rajaguru, K and Rangaraj, L (2020) Processing of Cf/SiC composites by hot pressing using polymer binders followed by polymer impregnation and pyrolysis. Journal of the European Ceramic Society, 40 (2). pp. 290-297. ISSN 09552219
Stanley , C Salem and Gowda, MNN and Ramachandra, HV and Kamath, GM Development of Carbon Fibre Metal Laminates (CFML): Design, Fabrication and Characterisation. Technical Report. NAL Press, NAL.
Stanley , C Salem and Kotresh, Gaddikeri M and Gowda, MNN and Ramesh, Sundaram and Dhayanidhi , J and Nagarajappa, B and Sathiya Naarayan, S and Satish, Chandra and Anuradha , Nayak and Vijay , Petley and Ramachandra, S Design and Testing of Wing Leading Edge of a Light Transport Aircraft. In: NASAS 2011, Sep 22-24,2011, IIT Kanpur.
Stanley , C Salem and Kotresh, Gaddikeri M and Gowda, MNN and Ramesh, Sundaram and Dhayanidhi , J and Nagarajappa, B and Sathiya Naarayan, S and Satish, Chandra and Anuradha , Nayak and Vijay , Petley and Ramachandra, S Design and Testing of Wing Leading Edge of a Light Transport Aircraft. In: NASAS 2011, Sep 22-24,2011, IIT Kanpur.
Stanley , C Salem and Kowshik , BS and Gowda, MNN and Kotresh, Gaddikeri M and Ramesh, Sundaram and Devaiah, MC and Ramachandra, HV Evaluation of Fastener Pull Through Resistance of Aluminum. Technical Report. NAL Press.
Stanley , C Salem and Sandeep Kumar, V and Sugun, BS and Ramesh, Sundaram and Ramachandra, HV and Devaiah , MC and Srinivasa, V and Ramesh Kumar, M Experimental Characterisation of GLass Aluminum REinforced (GLARE™) laminates. Technical Report. NAL Press.
Stanley , C Salem and Sugun, BS and Gowda, MNN and Kamath, GM Low Velocity Impact Studies on Carbon Fiber Metal Laminates. Technical Report. NAL press, NAL.
Stanley , C Salem and Sugun, BS and Sandeep Kumar, V and Viswamurthy , SR and Ramesh, Sundaram Low Velocity Impact Characterisation of Carbon/Epoxy Laminates processed through Resin Infusion Technique. Technical Report. NAL Press.
Structural Sciences Division, (1985) Advanced Composite Technology Development Program. Project Report. National Aerospace Laboratories, Bangalore.
Subba Rao, M and Chandra, Ramesh (1984) Experimental investigation of behaviour of a typical riveted finite joint. In: Analysis of Structures - A Commemorative volume published on the occasion of the 60th Anniversary of Dr. S.R.Valluri, Dec 1984, NAL, Bangalore, India.
Subba Rao, M and Chandra, Ramesh (1986) Preliminary design of composite rudder for Do-228 aircraft x2013; part II. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Subba Rao, M and Chandra, Ramesh and Piening, M (1985) Preliminary design of composite rudder for DO-228 aircraft x2013; part I. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Subba Rao, M and Gowda, MNN (2002) Development of fin for LCA using advanced composites. Journal of the Aeronautical Society of India, 54 (2). pp. 106-108. ISSN 0001-9267
Subramaniam, C and Padma, A and Rao, RMVGK Studies on Aromatic Amine-Epoxy Novolac Systems. In: International Conference organised by RAPRA Technology Limited, March 22-23, 1990, Shropshire, England.
Subramanian, A and Chandra, R and Murthy, MVV and Rao, AK (1983) Photoelastic determination of stress intensity factors in patched cracked plates. Engineering Fracture Mechanics, 18 (2). pp. 305-313. ISSN 0013-7944
Sudheendra, HN and Madhava, MR (1992) An ultrasonic c-scan system for the NDE of advanced composites. Project Report. National Aerospace Laboratories, Bangalore.
Sugun, BS (2012) Of Weaves, Knits and Their Composites. In: Recent trends in textile technology and material science, 21-06-2012, Technical university of Liberec.
Sugun, BS and Ramaswamy, Setty J and Sandeep, DN and Dayananda, GN (2014) An Overview On Development Of Three Dimensional Reinforcements For Use In Composites At CSIR-NAL. In: INCCOM 13 organised by ISAMPE Thiruvananthapuram chapter, 14-15 Dec 2014, VSSC.
Sugun, BS and Rao, RMVGK (2006) DROP WEIGHT IMPACT TESTS ON T-800 CAI TEST SPECIMENS FOR LCA PROGRAMME. Project Report. National Aerospace Laboratories, Bangalore.
Sugun, BS and Rao, RMVGK Impact Damage Tolerance Assessment in Polymer Composites : A New Approach. In: ICRACM 07, Feb. 07, New Delhi, India.
Sugun, BS and Rao, RMVGK (2004) Impactor Mass Effects in Glass-Epoxy Composites Subjected to Repeated Drop Tests. Journal of Reinforced Plastics and Composites, 23 (14). pp. 1547-1560.
Sugun, BS and Rao, RMVGK (2009) Impactor Mass effects in polymer Matrix Composites under Low Velocity Conditions: A Repeated Drops Test Approach. lnternational Journal of Mechanical Engineering and Materials Sciences, 2(1) June 2009.
Sugun, BS and Rao, RMVGK (2004) Low-velocity Impact Characterization of Glass, Carbon and Kevlar Composites Using Repeated Drop Tests. Journal of Reinforced Plastics and Composites, 23 (15). pp. 1583-1599. ISSN 0731-6844
Sugun, BS and Rao, RMVGK (2006) Preliminary studies on glare composites. Project Report. National Aerospace Laboratories, Bangalore.
Sugun, BS and Sundaram, Ramesh (2015) 3D Composites: Opportunities and Challenges. Journal of the Indian Institute of Science, 95 (3). pp. 221-231. ISSN 0970-4140
Sugun, BS and Sandeep, DN (2016) Development of single-layer 3D ‘T’ profile with fillet for composite ‘T’ joints. Journal of Industrial Textiles, 46 (3). pp. 887-900. ISSN 15280837
Sugun, BS and Sandeep, DN (2018) Integral weaving of orthogonal 3D ‘T’ stiffeners based on pleat weaving concept. Journal of Industrial Textiles, 47 (7). pp. 1626-1644. ISSN 15280837
Sujith M, Syam and Singh, Hema and Jha , RM (2012) A Study of Antireflection and High Reflection Dielectric/Metamaterial Coatings. Project Report. CSIR-NAL, Bangalore.
Sundaram, Ramesh (2008) Resin infusion technology for development of primary aircraft structures. In: Proceedings of the National Conference on Advanced Materials for Aerospace and Defence Applications (ADMAT-2008), 7-8 Jan 2008, Coimbatore, Tamil Nadu, India.
Sundaram, Ramesh and Kamath, GM and Gupta, Nitesh and Subbarao, M (2007) Structural health monitoring of co-cured aerospace composite structures using fibre optic sensors. In: 2nd ISSS National Conference on MEMS, Microsensors, Smart Materials, Structures and Systems, Nov 2007, Pilani, India.
Sundaresan, MJ and Ramachandra, HV and Sridhara, S and Naik, V and Sudheendra, HN (1983) Evaluation of damage growth in hybrid composites by AE energy measurement. In: International Symposium on Acoustic Emission from Reinforced Plastics,, 19-21 July 1983, San francisco, United States.
Sunder, R (1985) Development of controllers for component fatigue testing facility for use in future R amp; D programme. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Sunil, S and Abhilash, JK and Kumar, A and Shukla, HK (2019) Oxidative stabilization studies on pretreated polyacrylonitrile precursor fiber suitable for carbon fiber production. In: AIP Conference Proceedings 2166.
Sunil, S and Porkodi, P and Kottiyatil, AJ and Ghosh, P (2021) Polymer-graphene composites as anticorrosive materials. In: Polymer Nanocomposites Containing Graphene Preparation, Properties, and Applications. Woodhead Publishing Series in Composites Science and Engineering . Elsevier, pp. 589-614.
Sunithamma, J and Joseph, Varsha Jose and Raveendranath, U and Jha, RM (2001) EM Material Characterisation based Determination of the Fabrication Tolerance of C-Radome. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Surendra, C and Rahul Kumar, C and Mohan Kumar, K and Rao, RMVGK (2006) CFRP Composite Components for SATCOM Programme. Project Report. National Aerospace Laboratories, Bangalore.
Suresh Kumar, M and Raghavendra, K and Venkataswamy, MA and Ramachandra, HV (2012) Fractographic Analysis of Tensile Failures of Aerospace Grade Composites. Materials Research, 15 (6). pp. 990-997.
Suresh Kumar, R and Sivakumar, D and Venkateswarlu, K and Gandhi, AS Mechanical behavior of molybdenum disilicide reinforced silicon carbide composites. Scripta Materialia , 65 (9). pp. 838-841. ISSN 1359-6462
Suresh Kumar, M and Ambresha, M and Panbarasu, K and Kishore, I and Ranganath, VR (2015) A comparative study of failure features in aerospace grade unidirectional and bidirectional woven CFRP composite laminates under four-point bend fatigue loads. Materialwissenschaft und Werkstofftechnik, 46 (6). pp. 644-651. ISSN 09335137
Swain, Niharika and Venkatesh, V and Kumar, P and Srinivas, G and Ravishankar, S and Barshilia, Harish C (2017) An experimental investigation on the machining characteristics of Nimonic 75 using uncoated and TiAlN coated tungsten carbide micro-end mills. CIRP Journal of Manufacturing Science and Technology, 16. pp. 34-42. ISSN 17555817
Tantri , PS and Ramasesha, Sheela K and Jae-Seol, Lee and Toyohiko , Yano (2004) Effect of Double Reinforcements on Elevated-Temperature Strength and Toughness of Molybdenum Disilicide. Journal of American Ceramic Society, 87 (4). pp. 626-632.
Tanushri , S and Rathore, Rahul and Singh, Hema and Jha , RM (2012) Electromagnetic Propagation Multilayered Dielectric-Metamaterial Media. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Tanushri , S and Rathore, Rahul and Singh, Hema and Jha , RM (2012) Electromagnetic Propagation in Classical Multilayered Media. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Thammaiah, BR and Fernando, CD and Majila, AN and Anilchandra, AR and Nandana, MS and Bhat, UK and Manjunatha, CM (2021) High Strain Rate Behavior of GTM-900 Titanium Alloy. Materials Performance and Characterization, 10 (2). pp. 1-13. ISSN 2379-1365
Thanasamy, D and Jesuraj, D and Avadhanam, V and Chinnadurai, K and Kannan, S K K (2022) Microstructural effect of various polyaniline-carbon nanotube core- electrode performance. Journal of Energy Storage, 53. ISSN 2352152X
Thanasamy, D and Jesuraj, D and Konda kannan, SK and Avadhanam, V (2019) A novel route to synthesis polythiophene with great yield and high electrical conductivity without post doping process. Polymer, 175. pp. 32-40. ISSN 00323861
Thawre, MM and Dubey, A and Verma, KK and Peshwe, DR and Jagannathan, N and Manjunatha, CM (2016) A Study on the Fatigue Life of a Composite T-Joint Subjected to Transport Aircraft Spectrum Loads. Transactions of the Indian Institute of Metals, 69 (2). pp. 409-413. ISSN 09722815
Thawre, MM and Pandey, KN and Dubey, A and Verma, KK and Peshwe, DR and Paretkar, RK and Jagannathan, N and Manjunatha, CM (2015) Fatigue life of a carbon fiber composite T-joint under a standard fighter aircraft spectrum load sequence. Composite Structures, 127. pp. 260-266. ISSN 02638223
Thawre, MM and Paretkar, RK and Peshwe, DR and Ramesh, Sundaram and Manjunatha, CM (2011) Construction of constant fatigue life diagram for a carbon fiber composite. Transactions of The Indian Institute of Metals, 64 (3). pp. 301-303.
Thawre, MM and Verma, KK and Jagannathan, N and Peshwe, DR and Paretkar, RK and Manjunatha, CM (2016) Effect of ply-drop on fatigue life of a carbon fiber composite under a fighter aircraft spectrum load sequence. Composites Part B: Engineering, 86. pp. 120-125. ISSN 13598368
Thulasi Durai, D and Venkatesh, S and Byji, Varughese and Ramanaiah, B and Dayananda, GN (2009) Concepts for truss based aerofoil constructions. Technical Report. NAL.
Thulasi Durai, D and Viswamurthy , SR and Vinoth, M and Balasubramaniam, - and Mohan, Kumar M and Dayananda, GN (2011) Development of a damage tolerant truss based composite empennage box. In: Proceedings of XII NASAS, 23-24, Sept 2011, IIT, Kanpur, India.
Tirlapur, Pradeep and Muniprakash, M and Srivastava, Meenu (2016) Corrosion and Wear Response of Oxide-Reinforced Nickel Composite Coatings. Journal of Materials Engineering and Performance, 25 (7). pp. 2563-2569. ISSN 10599495
Tiwari, S and Kumar, R and Dangi, A and Antony Jeyaseelan, A and Dutta, Soma and Pratap, R (2022) Low cost, contamination-free, and damage-free fabrication of PZT MEMS on SOI substrate. Journal of Micromechanics and Microengineering, 32 (2). pp. 1-10. ISSN 09601317
Tiwari, S and Kumar, R and Menon, P K and Antony Jeyaseelan, A and Dutta, Soma and Pratap, R (2019) On the realization of self-sensing piezoelectric MEMS actuators. In: Proceedings of MARSS 2019: 4th International Conference on Manipulation, Automation, and Robotics at Small Scales, 1-5 July 2019, Helsinki, Finland.
UdayaKumar, A and Balasubramanian, M and Gopala, HB and Sampathkumaran, P and Seetharamu, S and Babu, Ramesh and Sathiyamoorthy, D and Reddy, GR (2011) Influence of the type of interface on the tribological characteristics of ICVI generated SiCf/SiC composites. Wear, 271. pp. 859-865. ISSN 0043-1648
UdayaKumar, A and Raole, PM and Balasubramanian, M (2011) Synthesis of tailored 2D SiCf/SiC ceramic matrix composites with BN/C interphase through ICVI. Journal of Nuclear Materials, 417 (1). pp. 363-366. ISSN 0022-3115
UdayaKumar, A and Stalin, M and Venkateswarlu, K (2013) Effect of CVD SiC seal coating on the mechanical properties of Cf /SiC composites generated through CVI. Surface and Coatings Technology. pp. 1-26. ISSN 0257-8972
Ushadevi, S and Balasingh, C (1993) Retained Austenite in Garret Engine Gears. Technical Report. National Aerospace Laboratories, Bangalore, India.
Ushadevi, S and Singh, AK (1984) The pressure-volume relation of ytterbium up to 9GPa. Bulletin of Materials Science, 6 (2). pp. 395-403.
Valluri, SR and Rajagopalan, SR (1983) Materials research at National Aeronautical Laboratory13; (Contributions of S Ramaseshan). Bulletin of Material Science, 5 (3 amp;). pp. 373-380.
Vanaja, A and Jayasankar , S and Senthilkumar, P and Padmavathi , T and Jyotsna Kiran, Mathad and Dayananda, GN (2014) MWCNT/EPOXY Composite Film as a Structural Strain Sensor for Micro Air Vehicles. In: ISSS 2014, 08 Jul 2014, Bangalore.
Vanaja, A and Padmavathi, T and Rao, RMVGK and Jyotsna, T.S (2008) Phenolic novolac IPNs for High Performance Composite Applications. International Journal of Mechanical Engineering and Materials Sciences, 1 (2). pp. 123-127.
Vanaja, A and Rao, RMVGK (2007) Commissioning of a Contolled Strain Rheometer Equipment for Characterisation of Polymers , Pre-pregs and Composites. Documentation. National Aerospace Laboratories, Bangalore.
Vanaja, A and Rao, RMVGK (2007) Commissioning of a controlled strain rheometer equipment for characterization of Polymers, Prepregs and composites. Technical Report. National Aerospace Laboratories, Bangalore, India.
Vanaja, A and Rao, RMVGK Developmental studies on High temperature bis-maleimide resin Composites. Project Report. National Aerospace Laboratories, Bangalore.
Vanaja, A and Rao, RMVGK (2002) Fibre Fraction Effects on Thermal Degradation Behaviour of GFRP, CFRP and Hybrid Composites. Journal of Reinforced Plastics and Composites, 21 (15). pp. 1389-1398. ISSN 0731-6844
Vanaja, A and Rao, Sandhya and Rao, RMVGK (2003) Glass Transition Temperature (T,) measurements on travel coupons of Nose Cone Radome for Jaguar Maritime Aircraft. Project Report. NAL, Bangalore.
Vanaja, A and Rao, Sandhya and Rao, RMVGK (2006) Installation and commissioning of conveyor-type microwave cure equipment at FRP. Project Report. National Aerospace Laboratories, Bangalore.
Vanarotti, M and Shrishail, P and Sridhar, BR and Venkateswarlu, K and Kori, SA (2014) Surface Modification of SiC Reinforcements & Its Effects on Mechanical Properties of Aluminium Based MMC. Applied Mechanics and Materials, 446-44. pp. 93-97. ISSN ISSN: 1662-7482
Vanarotti, M and Venkateswarlu, K and Kori, SA and Sridhar, BR and Padasalgi, SB (2013) Effect of Ni coating on SiC particles to synthesize Al based Metal Matrix Composites. International Journal of Science Research, 01 (4). pp. 405-409. ISSN 2319-7064
Vani, GV (1977) The Crystal and Molecular Structure of the Nematogenic Compound N-p-Methoxybenzylidene-p-phenylazoaniline (MBPAA). Acta Cryst.. pp. 2236-2240.
Varughese, Byji and Kishore, A and Radhakrishna, K and Subba Rao, M (2005) Buckling and Postbuckling studies on stiffened composite13; panels with circular cutouts. In: Isampe National Conference on Composites / INCCOM IV, 9-10 Dec 2005, Coimbatore, India.
Vedavathi, BM and Mani, A and Vijayan, Kalyani (1982) Crystal data on L-epinephrine bydrochloride monohydrate. Current Science, 51 (9). p. 466.
Vedavathi, BM and Vijayan, Kalyani (1979) 2-Amino-1,3-thiazoline hydrochloride. Acta Crystallography (B37). pp. 477-480. ISSN 0567.7408
Vedavathi, BM and Vijayan, Kalyani (1976) Radioprotectant Sodium Fluoroacetate. Acta Crystallography. pp. 946-948.
Vedavathi, BM and Vijayan, Kalyani (1979) The crystal and structure of the radioprotectant cystamine dhydrochloride. Current science, 48 (23). pp. 1028-1030.
Veenashree, M and Prasad, G and Chakradhar, RPS and Srivastava, Meenu (2014) Corrosion behaviour of pulse electrodeposited Nickel based composite coatings. In: CORCON 2014, 12 Nov 2014, Mumbai, Maharashtra, India.
Veeraiah, G and Ramanaiah, N and Sudhakar, I and Venkateswarlu, K (2022) Influence of AC-TIG weld current on dissimilar AA5083 and AA 7075 aluminium alloy. Advances in Materials and Processing Technologies, 8 (4). pp. 4095-4105. ISSN 2374068X
Velhal, N and Kulkarni, G and Mahadik, D and Chowdhury, P and Barshilia, Harish C and Puri, V (2016) Effect of Ba+2 ion on structural, magnetic and microwave properties of screen printed BaxSr1-XFe12O19 thick films. Journal of Alloys and Compounds, 682. pp. 730-737. ISSN 09258388
Verma, KK and Padmakara, G and Gaddikeri, KM and Ramesh, Sundaram and Kumar, S and Bose, S (2019) The key role of thread and needle selection towards ‘through-thickness reinforcement’ in tufted carbon fiber-epoxy laminates. Composites Part B: Engineering, 174. ISSN 13598368
Verma, KK and Viswamurthy, SR and Gaddikeri, KM and Ramesh, Sundaram and Kumar, S and Bose, S (2021) Tufting thread and density controls the mode-I fracture toughness in carbon/epoxy composite. Composite Structures, 261. ISSN 02638223
Verma, KK and Viswarupachari, CH and Gaddikeri, KM and Ramesh, Sundaram and Kumar, S and Bose, S (2021) Unfolding the effects of tuft density on compression after impact properties in unidirectional carbon/epoxy composite laminates. Composite Structures, 258. ISSN 24680230
Verma, KK and Viswarupachari, CH and Viswamurthy, SR and Gaddikeri, KM and Kumar, S and Bose, S (2020) Effect of Tufting on Mechanical Performance of Co-cured Co-infused Carbon-Epoxy Composite T-joint. Composite Structures, 250. ISSN 02638223
Vigneshwaran, S and Krishna, KSVBR and Sekhar, KC and Sivaprasad, K and Venkateswarlu, K and Narayanasamy, R (2016) A study on the work hardening and the effect of triaxiality on the fracture behaviour of some cryorolled aluminium alloys. Materials Science and Engineering A, 678. pp. 165-177. ISSN 09215093
Vigneshwaran, S and Sivaprasad, K and Narayanasamy, R and Venkateswarlu, K (2018) Formability and fracture behaviour of cryorolled Al-3 Mg-0.25 Sc alloy. Materials Science and Engineering A, 721. pp. 14-21. ISSN 09215093
Vigneshwaran, S and Sivaprasad, K and Narayanasamy, R and Venkateswarlu, K (2019) Microstructure and mechanical properties of Al – 3Mg – 0.25 Sc alloy sheets produced by cryorolling. Materials Science and Engineering: A, 740-41. pp. 49-62. ISSN 09215093
Vigneshwaran, S and Sivaprasad, K and Narayanasamy, R and Venkateswarlu, K (2019) Superior Strength with Enhanced Fracture Resistance of Al-Mg-Sc Alloy Through Two-Step Cryo Cross Rolling. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (7). pp. 3265-3281. ISSN 10735623
Vijayan, Kalyani and Mani, A and Balasingh, C and Singh, AK (1987) X-ray analysis of polycrystalline aluminium subjected to fatigue cycling. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Vijayan, Kalyani and Mani, A and Balasingh, C and Singh, AK (1986) An oscillatory variation of the half-width of x-ray diffraction-line profiles with fatigue cycling. Scripta Metallurgica, 20. pp. 1767-1770.
Vijayan, Kalyani and Singh, AK and Panchapakesan, S and Janardhan, S and Kumar, N (1985) Software for AD/380 graphics system - (A) Quick actions for computer stimulation of transformation and (B) Fortran program for extracting coordinates of points of a graphic file. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Vijayan, Kalyani and Iyer, RV and Jain, Anjana (1996) Effect of penetrants on polyamides. Indian Journal of Chemical Technology, 3 (3). pp. 164-167. ISSN 0975-0991
Vijaykumar, MP and Rangaraj, L and Raja, S (2019) Synthesis and characterization of high-performance epoxy/ Ti3AlC2-reinforced conductive polymer composites. Journal of Composite Materials, 53 (26-27). pp. 3861-3874. ISSN 00219983
Vinayak, RU and Iyengar, NGR (1995) Transient thermal conduction in rectangular fiber reinforced composite laminates. Advanced Composite Materials: The Official Journal of the Japan Society of Composite Materials, 4 (4). pp. 327-342. ISSN 0924-3046
Vineetha, Vineetha and Dileep, Alka and Abhilash, PV and Nair, RU and Singh, H (2021) Metasurfaces for Stealth Applications: A Comprehensive Review. Journal of Electronic Materials,, 50 (6). pp. 3129-3148. ISSN 03615235
Vinoy, KJ and Jha, RM (1995) Classification of Radar Absorbing Materials. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Vinoy, KJ and Jha, RM (1998) Determination of Radome Panel Performance based on Electromagnetic Material Characterisation Data for DWR Radome. Project Report. CSIR-NAL, Bangalore.
Vinoy, KJ and Jha, RM (1997) EM Characterisation of Candidate Radome Materials and Analysis of Radome Panel Performance for DWR Radome. Project Report. CSIR-NAL, Banaglore.
Vinoy, KJ and Jha, RM (1996) Electromagnetic Characterisation of Materials for DWR Radome. Project Report. CSIR-NAL, Bangalore.
Vinoy, KJ and Jha, RM (1994) Radar Absorbing Materials (RAM) - A Review. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Vinoy, KJ and Jha, RM (1994) Radar Absorbing Materials (RAM) - A Review. Technical Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Vinoy, KJ and Jha, RM (1994) Radar Absorbing Materials (RAM): A Cross-Indexed Bibliography (1956-1993). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.
Viswamurthy, SR and Siva, M and Ramachandra, HV (2013) Interlaminar Fracture Toughness Characterization of Unidirectional Glass Fiber Composite (S2/913 prepreg). Technical Report. CSIR-NAL, CSIR-NAL, Bangalore.
Viswamurthy, SR and Venkatesh, S and Gaddikeri, KM (2014) Damage Tolerance of Stiffened Skin Composite Panels. In: 18th NASAS (Eighteenth National Seminar on Aerospace Structures), 15-17 December 2014, VNIT Nagpur.
Viswamurthy , SR and Ajeesh, G and Pavan, Hiremath and Ashwin, Rai and Venkatesh, S and Kotresh, Gaddikeri M (2015) Damage Tolerance of Stiffened Skin Composite Panels. Journal of Aeospace Sciences and Technologies, 67 (2B). pp. 291-298. ISSN 0972-950x
Viswamurthy , SR and Siva, M and Ramachandra, HV and Stanley , C Salem (2013) Interlaminar Fracture Toughness Characterization of Unidirectional Carbon Fiber Composite (AS4/914 prepreg). Technical Report. CSIR-NAL, CSIR-NAL, Bangalore.
Viswamurthy , SR and Stanley , C Salem and Kotresh, Gaddikeri M and Ramesh, Sundaram (2012) Damage Characteristics & Residual Compression Strength of CFRP Laminates manufactured using VERITy Subjected to Low Velocity Impact. Technical Report. CSIR-NAL, Bangalore.
Viswanathan, KS and Chandra, Ramesh (1986) Material characterisation of Carbon-Epoxy composites. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Viswanathan, S and Mohan, L and Bera, Parthasarathi and Anandan, C (2016) Effect of oxygen plasma immersion ion implantation on the formation of nanostructures over Ni-Ti alloy. RSC Advances, 6 (78). pp. 74493-74499. ISSN 20462069
Viswanathan, S and Mohan, L and Bera, Parthasarathi and Shanthiswaroo, P and Muniprakash, M and Barshilia, Harish C and Anandan, C (2018) Corrosion and wear resistance properties of multilayered diamond-like carbon nanocomposite coating. Surface and Interface Analysis, 50 (3). pp. 265-276. ISSN 01422421
Viswanathan, S. and Mohan, L. and Chakraborty, M. and Mandal, C. and Bera, P. and Aruna, S.T. and Anandan, C. (2017) Carbon plasma immersion ion implantation and DLC deposition on Ni−Ti alloy. Materials and Manufacturing Processes. pp. 1-7. ISSN 10426914
William Grips, VK and Barshilia, Harish C and Ezhil Selvi, V and Kalavati, - and Rajam, KS (2006) Electrochemical behavior of single layer CrN, TiN, TiAlN coatings and nanolayered TiAlN/CrN multilayer coatings prepared by reactive direct current magnetron sputtering. Thin Solid Films, 514 (1-2). pp. 204-211.
Yoganandan, G and Bharathidasan, T and Basu, Bharathibai J and Balaraju, JN (2013) Effect of ageing and FAS modification on the wettability of anodized Al alloy. In: NSEST 2013, 2013-08-23, IISc, Bangalore.
Yoganandan, G and Balaraju, JN and Low, Christopher HC and Qi, Guojun and Chen, Z (2016) Electrochemical and long term corrosion behavior of Mn and Mo oxyanions sealed anodic oxide surface developed on aerospace aluminum alloy (AA2024). Surface and Coatings Technology, 288. pp. 115-125. ISSN 02578972
Yoganandan, G and Balaraju, JN and Manikandanath, NT and Ezilselvi, V and Srivastava, Meenu and Naga Charan, KV and Anilchandra, AR and Manjunatha, CM (2018) Surface and Electrochemical Characteristics of Novel Chromate-Free Mn-V Oxyanion Sealed Tartaric–Sulfuric Acid Anodized Coating. Journal of Materials Engineering and Performance, 27. pp. 6175-6188.
