 | Up a level |
Aravind, M and Kumar, CVS and Pai, BR and Kumar, HSR (2015) Experimental study of pitch damping in a coaxial model helicopter. In: ARF 2015 - 4th Asian-Australian Rotorcraft Forum, 15-18 November 2015, Bangalore, India.
Bekinal, SI and Rao, Anil and Kulkarni, SS and Jana, S (2015) Hybrid permanent magnet and foil bearing system for complete passive levitation of rotor. Mechanisms and Machine Science, 23. ISSN 22110984
Borra, HK and Alone, DB (2015) Stall margin improvement of a single stage transonic axial flow compressor using naturally aspirated slots. In: GTINDIA2015, December 2-3, 2015, Hyderabad, India.
Felix, J and Rajendran, R and Narayanappa, KG and Yepuri, GB and Sasikumar, V and Poozhiyil, S (2015) Experimental investigation of overall cooling effectiveness on combustion chamber liner with and without impingement holes. In: GTINDIA2015, December 2-3, 2015, Hyderabad, India.
Goswami, N and Alone, DB and Choksi, HS (2015) Numerically understand the combined effect of tip clearance and circumferential grooves casing treatment on the performance of single stage transonic axial flow compressor. In: ASME 2015 Gas Turbine India Conference, December 2–3, 2015, Hyderabad, India.
Jose, N and Jayakumar, JS and Yepuri, GB (2015) Numerical Investigation of Adiabatic Film Cooling Effectiveness over a Flat Plate Model with Cylindrical Holes. Procedia Engineering, 127. pp. 398-404. ISSN 18777058
Kumar, SS and Ganguli, Ranjan and Kandagal, SB and Jana, S (2015) Flow behavior in a transonic axial compressor stage. In: GTINDIA2015, December 2-3, 2015, Hyderabad, India.
Kumaran, S and Kamble, S and Swamy, KMM and Nagpurwala, QH and Bhat, A (2015) Effect of Axial Velocity Density Ratio on the Performance of a Controlled Diffusion Airfoil Compressor Cascade. International Journal of Turbo and Jet Engines. pp. 1-13. ISSN 2191-0332
Mehta, JN and Alone, DB and Choksi, HS (2015) Computational analysis of effect of circumferential groove casing treatment with different axial coverage over rotor blade tip chord on the performance of a transonic axial compressor stage. In: ASME 2015 Gas Turbine India Conference, GTINDIA 2015, December 2-3, 2015, Hyderabad.
Mehta, JN and Alone, DB and Choksi, HS (2015) Numerical investigation on effect of aspect ratio of axisymmetric circumferential groove casing treatment coupled to a transonic axial flow compressor stage. In: ASME 2015 Gas Turbine India Conference, India.
Mishra, S and Kumar, A and Singh, O and Upadhyay, A and Roshan, Antony (2015) Assessment of a Bio-inspired Artificial Wing for Micro Aerial Vehicle Based on Structural Bio-mimetics. In: 4th International Conference on Materials Processing and Characterzation.
Prathapanayaka, R and Vinodkumar, N and Santhosh Kumar, S and Krishnamurthy, SJ and Sharma, Narndra (2015) Realistic assessment of efficiencies of micro air vehicle propellers. International Journal of Innovative Research in Science, Engineering and Technology, 4 (2). pp. 442-449. ISSN 2319-8753
Rajashekar, C and Aruna, ST and Janaki Rami Reddy, M and Raghukumar, HS and Isaac, JJ (2015) Studies on the Resonant, Combusting Flow Phenomena in a Small-Scale Quartz Glass Valveless Pulsejet Engine by High-Speed Flame Imaging using Chemical Tracers. In: 24th National Conference on IC Engines and Combustion, 30th Oct to 1st Nov 2015, Dehradun.
Rajendran, AK and Shobhavathy, MT and Kumar, RA (2015) CFD analysis to investigate the effect of vortex generators on a transonic axial flow compressor stage. In: GTINDIA2015, December 2-3, 2015, Hyderabad, India.
Rajesh, E and Roy, B (2015) Numerical study of variable camber inlet guide vane on low speed axial compressor. In: GTINDIA2015, December 2-3, 2015, Hyderabad, India.
Rajkumar, DR and Ramamurthy, S and Govardhan, M (2015) Experimental investigations on effects of tip clearance in mixed-flow compressor performance. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 229 (5). pp. 933-946. ISSN 09544100
Selvan, M and Rao, MS and Karb, I and Thirumalachari, S and Vyas, VK and Neelakandan, S (2015) Experimental analysis of simplex atomizer spray and swirling flow interactions in unconfined conditions. In: GTINDIA2015, December 2–3, 2015, Hyderabad, India.
Veera Sesha Kumar, C and Janaki Rami Reddy, M and Pandian, K and Rajendran, R and Jayaraman, M (2015) Test Report for High Speed Alternator of MANIK Engine. Project Report. National Aerospace Laboratories.
Vinay, CA and Chakravarthy, B and Venkat Iyengar, S (2015) CFD Analysis and Experimental Study of Engine Air Intake for A Pusher Type Light Turbo Prop Aircraft. In: ANSYS Convergence 2015, 15-05-2015, Bangalore.
Yepuri, GB and Felix, J and Batchu, A and Venkataraman, K (2015) Experimental investigation of adiabatic film cooling effectiveness over a circular, fan and laidback fan shaped hole flat plate test models. In: GTINDIA2015, December 2-3, 2015, Hyderabad, India.
