 | Up a level |
Abbasi, U and Chowdhury, P and Subramanian, S and Jain, P and Muthe, N and sheikh, F and Banerjee, S and Kumaran, V (2019) cartridge based Point-of-Care device for complete blood count. Scientific Reports. pp. 1-16. ISSN 20452322
Abhilash, KJ and Porkodi, P and Shukla, HK (2019) Wet spinning of low cost carbon fiber precursor-lignin incorporated polyacrylonitrile co-polymer fiber. In: AIP Conference Proceedings.
Ailneni, S and Kashyap, SK and Shantha Kumar, N and David Livingstone, D and Aishwarya, N and Varghese, N and Karthik, KV (2019) Characterization of MEMS based Inertial Measurement Unit. In: 2019 International Conference on Range Technology (ICORT), 15-17 Feb, 2019, Balasore, India.
Alex, S and Kumar, P R and Chattopadhyay, K and Barshilia, Harish C and Basu, B (2019) Thermally evaporated Cu–Al thin film coated flexible glass mirror for concentrated solar power applications. Materials Chemistry and Physics, 232. pp. 221-228. ISSN 02540584
Alvi, AU and Thakur, A and Jangam, S and Pratheesh Kumar, P and Iyengar, VS (2019) Experimental investigation of droplet velocity fields from elliptic injectors in subsonic cross flow. In: ASME 2019 Gas Turbine India Conference, December 5–6, 2019, Chennai, Tamil Nadu, India.
Anand Kumar, KS and Sachin, Kumar and Saket, RK and Rajendran, R (2019) Technological aspects of microbial fuel cells and soil based green energy conversion system. GMSARN International Journal, 13 (4). pp. 159-170. ISSN 19059094
Antony Jeyaseelan, A and Rangappa, D and Dutta, Soma (2019) Double doping effect on ferroelectric and leakage current behavior of Pb(Zr0.52Ti0.48)O3 thin film. Ceramics International, 45 (18). pp. 25027-25033.
Arun, S and Marbaniang, B and Borgohain, B and Kanagaraj, S (2019) Rehabilitation evaluation of the newly developed polymeric based passive polycentric knee joint. Disability and Rehabilitation: Assistive Technology, 15 (8). pp. 871-877. ISSN 17483107
Atchuta, S.R and Barshilia, H.C. and Sakthivel, S (2019) High-temperature stable spinel nanocomposite solar selective absorber coating for concentrated solar thermal application. In: Proceedings of the ISES Solar World Congress 2019 and IEA SHC International Conference on Solar Heating and Cooling for Buildings and Industry.
Atchuta, SR and Sakthivel, S and Barshilia, Harish C (2019) Nickel doped cobaltite spinel as a solar selective absorber coating for efficient photothermal conversion with a low thermal radiative loss at high operating temperatures. Solar Energy Materials and Solar Cells, 200. ISSN 09270248
Avinash, J and Bhovi, PM and Venkateswarlu, K (2019) Microstructure and mechanical properties evolution of aa 2024 alloy subjected to RCS. Indian Journal of Engineering and Materials Sciences, 26 (2). pp. 155-160. ISSN 09714588
Babu, MD and JeevithaShree, DV and Prabhakar, G and Saluja, KPS and Pashilkar, AA and Biswas, P (2019) Estimating pilots' cognitive load from ocular parameters through simulation and in-flight studies. Journal of Eye Movement Research, 12 (3). pp. 1-16. ISSN 19958692
Babu, MD and Prabhakar, G and Jeevithashree, DV and Saluja, KPS and Pashilkar, AA and Biswas, P (2019) Using Eye gaze tracker to automatically estimate pilots' cognitive load. In: 50th Annual International Symposium of the Society of Flight Test Engineers.
Baidya, T and Murayama, T and Nellaiappan, S and Katiyar, NK and Bera, Parthasarathi and Safonova, O and Lin, M and Priolkar, KR and Kundu, S and Srinivasa Rao, B and Steiger, P and Sharma, S and Biswas, K. and Pradhan, SK and Lingaiah, N and Malviya, KD and Haruta, M (2019) Ultra-Low-Temperature CO Oxidation Activity of Octahedral Site Cobalt Species in Co3O4 Based Catalysts: Unravelling the Origin of the Unique Catalytic Property. Journal of Physical Chemistry C, 123 (32). pp. 19557-19571. ISSN 19327447
Barat, K and Das, G and Bharathy, S and Ghosh, M (2019) Compositional optimization of a commercially produced ferritic steel using microstructural heterogeneity and mechanical properties. Materials Performance and Characterization, 8 (1). pp. 566-581. ISSN 2379-1365
Barat, K and Shivaprasad, S and Kar, SK and Tarafder, S (2019) Low-cycle fatigue of IN 718: Effect of waveform. Fatigue and Fracture of Engineering Materials and Structures, 42 (12). pp. 2823-2843. ISSN 8756758X
Bepari Nawazish, A and Ananda, CM and Venkatesh, KS and Gopinath, CY (2019) Development and Integration of Graphical User Interface (GUI) with JUNGO Device Drivers for PCI Express Interface. In: Innovations in Computer Science and Engineering. Lecture Notes in Networks and Systems (74). Springer, Singapore, pp. 589-598. ISBN 978-981-13-7082-3
Bonu, V and Sahu, BK and Das, A and Amirthapandian, S and Dhara, S and Barshilia, Harish C (2019) Sub-wavelength waveguide properties of 1D and surfacefunctionalized SnO 2 nanostructures of various morphologies. Beilstein Journal of Nanotechnology, 9 (1). pp. 379-388. ISSN 21904286
Borkar, S and Muthu, K and Arunkumar, GL and Ashok Kumar, K (2019) Fabrication and experimentation of diffuser augmented wind turbine. International Journal of Recent Technology and Engineering, 8 (2). pp. 6047-6052. ISSN 22773878
Chidambaranathan, M and Verma, SB and Rathakrishnan, E (2019) Control of incident shock-induced boundary-layer separation using steady micro-jet actuators at M∞ = 3.5. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 233 (4). pp. 1284-1306. ISSN 09544100
Christiyan, KGJ and Chandrasekhar, U and Venkateswarlu, K (2019) Investigation on the mechanical properties of PLA & its composite fabricated through advanced fusion plastic modelling. Journal of Mechanical Engineering Research and Developments, 42 (3). pp. 47-54. ISSN 10241752
Dan, A and Soum-Glaude, A and Carling-Plaza, A and Ho, CK and Chattopadhyay, K and Barshilia, Harish C and Basu, B (2019) Temperature- And Angle-Dependent Emissivity and Thermal Shock Resistance of the W/WAlN/WAlON/Al2O3-Based Spectrally Selective Absorber. ACS Applied Energy Materials, 2 (8). pp. 5557-5567. ISSN 25740962
Das, R and Joshi, SS and Barshilia, Harish C (2019) Analytical model of progression of flank wear land width in drilling. Journal of Tribology, 141 (1). pp. 1-9. ISSN 07424787
De, MM and Mathur, JS and Vengadesan, S (2019) Simulation of flapping wings subjected to gusty inflow. Aeronautical Journal, 123 (1266). pp. 1170-1192. ISSN 00019240
De, Manabendra M and Mathur, JS and Vengadesan, S (2019) Recurrence studies of insect-sized flapping wings in inclined-stroke plane under gusty conditions. Sadhana - Academy Proceedings in Engineering Sciences, 44 (3). pp. 1-17. ISSN 02562499
Deshpande, P J and Modani, A (2019) Experimental investigation of fluid–structure interaction in a bird-like flapping wing. Journal of Fluids and Structures, 91. ISSN 08899746
Dutta, S and Karmakar, A and Roy, H and Barat, K (2019) Automatic estimation of mechanical properties from fractographs using optimal anisotropic diffusion and Voronoi tessellation. Measurement: Journal of the International Measurement Confederation, 134. pp. 574-585. ISSN 02632241
Felix, J and Rajendran, R and Kumar, GN and Babu, YG and Karthik, MK and Ramesha, DK (2019) Experimental and Numerical Investigation of Effusion Cooling Performance Over Combustor Liner Flat Plate Model. Heat Transfer Engineering, 40 (15). pp. 1-14. ISSN 01457632
Gouda, DN and Senthilkumar, P and Geetha, RS (2019) Performance Evaluation of Interleaved Concept for Non-Isolated Converter Topology. In: 2019 IEEE International Conference on Electrical, Computer and Communication Technologies (ICECCT), 20-22 Feb. 2019, Coimbatore, India.
Harish, DVN and Bharatish, A and Narasimha Murthy, HN and Anand, B and Rangaraj, L (2019) Evaluation of nanosecond laser ablation and scratch resistance of tantalum carbide coated graphite substrates. Ceramics International, 45 (17). pp. 22578-22588. ISSN 02728842
Haritha, A H and Ramachandra Rao, R (2019) Sol-Gel synthesis and phase evolution studies of yttrium silicates. Ceramics International, 45 (18). pp. 24957-24964.
Jagannathan, N and Gururaja, S and Manjunatha, CM (2019) Matrix cracking in polymer matrix composites under bi-axial loading. In: 2nd International Conference on Structural Integrity and Exhibition 2018.
Jalaja, MA and Dutta, Soma (2019) Optically controlled polarization, photovoltaic and switchable diode behavior in multifunctional KBiFe2O5 composite film. Ceramics International, 45 (17). pp. 22553-22557. ISSN 02728842
Jarali, Chetan S and Chikkangoudar, RN and Patil, SF and Raja, S and Lu, YC and Fish, J (2019) Thermodynamically consistent approach for one-dimensional phenomenological modeling of shape memory alloys. International Journal for Multiscale Computational Engineering, 17 (4). pp. 429-446. ISSN 15431649
Javagal, S and Raju, J and Venkataramana, K (2019) A comparative study of the behavior of CFRP and GFRP laminates in a plate specimen using modified virtual crack closure technique (MVCCT). In: 2nd International Conference on Structural Integrity and Exhibition 2018.
Jebakumar, SK and Navendu, Kumar and Pashilkar, AA (2019) Flight Envelope Protection for a Fighter Aircraft. In: 2019 6th Indian Control Conference, ICC 2019, 18-20 December 2019, Hyderabad, India.
Jigajinni, VS and Upendranath, V (2019) Health management of a typical small aircraft fuel system using an adaptive technique. In: 2018 IEEE 25th International Conference on High Performance Computing Workshops (HiPCW), 17-20 Dec 2018, Bengaluru, India.
Kaliraj, KR and Yepuri, GB and Sarasamma, JJ and Kumar, K and Jesuraj, F (2019) Parametric studies on gas turbine labyrinth seal for the secondary air flow optimization at static and rotating conditions. In: ASME 2019 Gas Turbine India Conference, GTINDIA 2019, December 5–6, 2019, Chennai, Tamil Nadu, India.
Kamali, C and Ozger, E (2019) Limitations of Flight Path Reconstruction techniques. Sadhana - Academy Proceedings in Engineering Sciences, 44 (2). pp. 1-15. ISSN 02562499
Karmakar, A and Barat, K (2019) Effect of elasto-plastic compatibility of grains on void-initiation criteria in low-carbon steel. Philosophical Magazine Letters, 99 (7). pp. 261-273. ISSN 09500839
Kondaiah, P and Niranjan, K and John, S and Barshilia, Harish C (2019) Tantalum carbide based spectrally selective coatings for solar thermal absorber applications. Solar Energy Materials and Solar Cells, 198. pp. 26-34. ISSN 09270248
Kumar, Awanish and Padhi, J and Reddy, GS and Narayan, Shiv (2019) Dual band polarization insensitive frequency selective surface absorber. In: MTT-S International Microwave and RF Conference, IMARC 2019, 13-15 December 2019, Mumbai, India.
Kumar, N and Deshpande, PJ and Dodamani, Ravi and Antony, R and Girish Prasad, M (2019) Interaction of two micro-propellers in coplanar and coaxial arrangement for UAV application. International Journal of Recent Technology and Engineering, 8 (2). pp. 5992-5995. ISSN 22773878
Kumar, S and Anand Kumar, KS and Kumar, S and Bharti, OP (2019) Probabilistic evaluation and design aspects for reliability enhancement of induction motor. International Journal of Reliability and Safety, 13 (4). pp. 267-290. ISSN 1479389X
Kumar, S and Onkar, AK and Maligappa, M (2019) Frequency domain approach for probabilistic flutter analysis using stochastic finite elements. Meccanica, 54 (14). pp. 2207-2225. ISSN 00256455
Kumar, SS and Chotalia, RJ and Jana, S and Ganguli, Ranjan and Kandagal, SB (2019) Single stage axial compressor stability management with self-recirculating casing treatment. In: AIAA Scitech 2019 Forum, 7-11 January 2019, San Diego, California.
Lakshmi, PG and Balaji, N and Anil Kumar, K and Ananthapadmanabhan, PV and Unnikrishnan, G and Senthil Kumar, S and Aruna, ST (2019) Solution combustion synthesis of calcia-magnesia-aluminosilicate powder and its interaction with yttria-stabilized zirconia and co-doped yttria-stabilized zirconia. Ceramic International, 45 (15). pp. 18255-18264. ISSN 18255–18264
Lakshmi, PG and Balaji, N and Kumar, KA and Ananthapadmanabhan, PV and Unnikrishnan, G and Senthil Kumar, S and Aruna, ST (2019) Solution combustion synthesis of calcia-magnesia-aluminosilicate powder and its interaction with yttria-stabilized zirconia and co-doped yttria-stabilized zirconia. Ceramics International, 45 (15). pp. 18255-18264. ISSN 02728842
Lakshmi, PG and Majithia, Sumil and Shwetha, V and Balaji, N and Aruna, ST (2019) Improved hot corrosion resistance of plasma sprayed YSZ/Gd2Zr2O7 thermal barrier coating over single layer YSZ. Materials Characterization, 147. pp. 199-206. ISSN 1044-5803
Lakshmi, RV and Pal, K and Mandal, TK and Aruna, ST (2019) Multifunctional properties of ceria nanocubes synthesized by a hydrothermal method. Bulletin of Materials Science, 42 (5). pp. 1-8. ISSN 02504707
Lakshmi, RV and Pal, Kamalesh and Mandal, TK and Aruna, ST (2019) Multifunctional properties of ceria nanocubes synthesized by a hydrothermal method. Bulletin of Mate, 42 (5).
Lathasree, P and Pashilkar, AA and Sundararajan, N (2019) Application of Generic Flight Controller Design Approach for A Delta Canard Fighter AircraftADMIRE. In: 6th Indian Control Conference, ICC 2019, 18-20 December 2019, Hyderabad, India.
Lokesha, H and Veena, S and Safiya, A and Ashwin Kumar, MP and Basavaraju, KS (2019) Evaluation of Delfino (TMS320F28379D) Processor for Helmet ANC Application. In: Global Conference for Advancement in Technology, GCAT 2019, 18-20 October 2019, Bengaluru, India.
Madivalappa, S and Jali, VM and Jain, Anjana (2019) Dielectric Properties of γ-Iirradiated, Stretched, and Poled PVDF Thin Films. Macromolecular Symposia, 387 (1). pp. 1-6. ISSN 10221360
Manju, S and Mukherjee, Somenath (2019) Function space formulation of the 3-noded distorted Timoshenko metric beam element. Structural Engineering and Mechanics, 69 (6). pp. 615-626. ISSN 12254568
Matta, S and Kolanu, NR and Chinthapenta, V and Manjunatha, CM and Ramji, M (2019) Progressive damage analysis of adhesively bonded patch repaired carbon fibre–reinforced polymer specimen under compression involving cohesive zone model. International Journal of Damage Mechanics, 28 (10). pp. 1457-1489. ISSN 10567895
Murugan, J N and Chutkey, Kiran and Verma, SB (2019) Influence of base cavity on base pressure at subsonic and supersonic Mach numbers. In: AIP Conference Proceedings.
Myala, J and Patel, Vijay V and Singh, GK (2019) Reliable Fault Identification for Aircraft Control Surface Damage. In: 6th Indian Control Conference, ICC 2019 - Proceedings, 18-20 December 2019, Hyderabad, India.
Nanda, Manju and Rajshekhar Rao, P (2019) Increasing the Verification Analysis Using Tool Assessment as Per DO-254. In: Innovations in Electronics and Communication Engineering. Lecture Notes in Networks and Systems (65). Springer, Singapore, pp. 387-394. ISBN 978-981-13-3765-9
Nandana, MS and Bhat, KU and Manjunatha, CM (2019) Improved fatigue crack growth resistance by retrogression and re-aging heat treatment in 7010 aluminum alloy. Fatigue and Fracture of Engineering Materials and Structures, 42 (3). pp. 719-731. ISSN 8756758X
Nandana, MS and Udaya Bhat, K and Manjunatha, CM (2019) Influence of retrogression and re-ageing heat treatment on the fatigue crack growth behavior of 7010 aluminum alloy. In: 2nd International Conference on Structural Integrity and Exhibition 2018.
Naveen, V and Raja, S and Deshpande, Abhijit P (2019) A two-step approach for synthesis, characterization and analysis of dicyclopentadiene–urea formaldehyde–siloxane-based double-walled microcapsules used in self-healing composites. https://link.springer.com/article/10.1007/s12588-019-09247-2, 23 (2). pp. 157-169. ISSN 0972656X
Niranjan, K and Kondaiah, P and Srinivas, G and Barshilia, Harish C (2019) Optimization of W/WAlSiN/SiON/SiO2 tandem absorber consisting of double layer anti-reflection coating with broadband absorption in the solar spectrum region. Applied Surface Science, 496. ISSN 01694332
Niranjanaa, K and Jerald Maria Antony, G and Raja, S (2019) A study on adsorption of gases in the thin film nanocomposites. In: International Conference on Materials for Energy and Environment (ICMEE 2018), Chennai, Tamil Nadu, India.
Noolvi, B and Raja, S and Nagaraj, S (2019) Constitutive modeling of smart adaptive composite with inactive SMP. In: International Conference on Advances in Materials, Manufacturing and Applied Sciences.
Pai, P and Pratyusha, PL and Naidu, VPS (2019) Geo-Localization of Target in 3-Dimensional Coordinate Using SRTM Data. Journal of The Institution of Engineers (India): Series B, 100 (1). pp. 53-60. ISSN 22502106
Prakashaiah, BG and Nityananda Shetty, A and Amitha Rani, BE (2019) Improvement of Anticorrosion Properties of Epoxy Primer Coating on Aluminum Alloy 2024-T3 by Thiosemicarbazone Derivatives. JOM, 71 (12). pp. 4880-4890. ISSN 10474838
Puri, V and Barshilia, Harish C (2019) Electromagnetic shielding, magnetic and microwave absorbing properties of Polypyrrole/ Ba0.6Sr0.4Fe12O19 composite synthesized via in-situ polymerization technique. Journal of Alloys and Compounds, 777. pp. 627-637.
Rajak, P and Kulkarni, PD and Krishnan, M and Chowdhury, P and Bhattacharyya, S (2019) Spatially resolved structure and domain wall propagation in defect induced SmCo/Co exchange spring magnet. Journal of Magnetism and Magnetic Materials, 491. ISSN 03048853
Ramaiah, KV and Saikrishna, CN and Bhagyaraj, J and Gouthama, - and Bhaumik, SK (2019) Microstructure and functional behaviour of shape memory annealed Ni 24.7 Ti 50.3 Pd 25 and Ni 24.7 Ti 49.3 Pd 25 Sc 1 alloys. Materials Characterization, 148. pp. 345-359. ISSN 10445803
Rangaraj, L and Sagar, RV and Stalin, M and Raghavendra, K and Venkateswarlu, K (2019) Synthesis, Characterization, and Mechanical Properties Evaluation of Mg-Ti3AlC2 Composites Produced by Powder Metallurgy/Hot Pressing. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (8). pp. 3714-3723. ISSN 10735623
Sajjan, Sangeetha S and Bhumika, CS and Choudhury, Balamati and Nair, RU (2019) Machine-learning for classification of naval targets. In: 2019 IEEE MTT-S International Microwave and RF Conference (IMARC), 13-15 December 2019, Mumbai, India.
Sendil, Murugan M and Pradeep Kumar, B and Ananda, CM and Lakshminarayanan, G (2019) Design Approach for FPGA based High Bandwidth Fibre Channel Analyser for Aerospace Application. In: 4th International Conference on Electrical, Electronics, Communication, Computer Technologies and Optimization Techniques, ICEECCOT 2019, 13-14 December 2019, Mysuru, India.
Shabaze, M and Sahoo, PK and Jagannatha Guptha, VL (2019) Multiscale material modelling and analysis of carbon fiber/MWCNT/ epoxy composites to predict effective elastic constants. In: Part of special issue: 1st International Conference on Manufacturing, Material Science and Engineering.
Shakti, D and Saha, S and Sardana, V and Akula, P and Ananda, CM and Tewary, S (2019) EEG as a tool to measure cognitive load while playing Sudoku: A preliminary study. In: 3rd International Conference on Electronics, Materials Engineering and Nano- Technology, IEMENTech 2019, 29-31 August 2019, Kolkata, India.
Shetty, K and Srihari, Shylaja and Manjunatha, CM (2019) Effect of hygrothermal aging on the interlaminar shear strength of a carbon fibre composite. In: 2nd International Conference on Structural Integrity and Exhibition 2018.
Shivaram, BS and Biradar, BS (2019) Assessing grey literature use by researchers of council for scientific and industrial research. Annals of Library and Information Studies, 66 (3). pp. 94-100.
Shivaram, BS and Biradar, BS (2019) Grey literature archiving pattern in open access (OA) repositories with special emphasis on Indian OA repositories. Electronic Library, 37 (1). pp. 95-107. ISSN 02640473
Shridhar, K and Suresha, BS and Mohan Kumar, M (2019) Fatigue Analysis of Wing-Fuselage Lug section of a Transport Aircraft. In: 2nd International Conference on Structural Integrity and Exhibition 2018.
Shyamasundar, LB and Anil Kumar, V and Jhansi Rani, P (2019) Fine-tuning resource allocation of apache spark distributed multinode cluster for faster processing of network-trace data. International Journal of Advanced Computer Science and Applications, 10 (11). pp. 634-645. ISSN 2158107X
Sindhu, BR and Raju, J and Kamath, K (2019) A comparative numerical study of standard 3D composite plate using virtual crack closure technique and cohesive zone modelling method. In: IOP Conference Series: Materials Science and Engineering, 12-13 April 2019, Coimbatore, Tamil Nadu, India.
Singh, S and Singh, V and Kumari, S and UdayaKumar, A and Bhanu prasad, VV (2019) A comparative study of tensile strength of Cf/SiC composites having single layer and multilayer interphases. Ceramics International, 45 (17). pp. 21193-21199. ISSN 02728842
Sivam, - and Verma, SB (2019) Study of vortex breakdown and pitch up on a compound delta wing. INCAS Bulletin, 11 (2). pp. 171-178. ISSN 20668201
Sravya, RV and Kumari, R and Choudhury, Balamati (2019) Gain Enhancement of Annular Ring Patch Using Cascaded EBG. In: 2019 IEEE MTT-S International Microwave Workshop Series on Advanced Materials and Processes for RF and THz Applications, 16-18 August 2019, Bochum, Germany.
Sreevidya, PV and Borole, UP and Gawade, T and Khan, Jakeer and Prajapat, C.L. and Kumar, Y and Barshilia, Harish C and Chowdhury, P (2019) Evolution of magnetoresistance behaviour at low temperatures in naturally oxidised specular spin valve systems. Journal of Magnetism and Magnetic Materials, 481. pp. 170-175. ISSN 03048853
Sreevidya, PV and Borole, UP and Gawade, T and Khan, Jakeer and Prajapat, C.L. and Yogesh, K and Barshilia, Harish C and Chowdhury, P (2019) MgO based specular spin valve with reversible minor loop and higher exchange bias for futuristic linear magnetic field sensor. Journal of Magnetism and Magnetic Materials, 486. ISSN 03048853
Srivastava, Meenu and Jadhav, M and Chetan, Kumar and Chakradhar, RPS and Muniprakash, M and Singh, S (2019) Synthesis and properties of high velocity oxy-fuel sprayed FeCoCrNi2Al high entropy alloy coating. Surface and Coatings Technology, 378. ISSN 02578972
Sunil, S and Abhilash, JK and Kumar, A and Shukla, HK (2019) Oxidative stabilization studies on pretreated polyacrylonitrile precursor fiber suitable for carbon fiber production. In: AIP Conference Proceedings 2166.
Suresh, S and Naidu, VPS (2019) Vibration Analysis of Heterogeneous Gearbox Faults using EMD Features and SVM Classifier. In: IOP Conference Series: Materials Science and Engineering.
Tabassum, I and Ananda, CM and Byra Reddy, CR (2019) Modelling and Simulation of VOR ILS Receiver Diagnostic Model for Avionics Systems Health Management. In: Innovations in Computer Science and Engineering. Lecture Notes in Networks and Systems (74). Springer, Singapore, pp. 579-588. ISBN 978-981-13-7082-3
Thanasamy, D and Jesuraj, D and Konda kannan, SK and Avadhanam, V (2019) A novel route to synthesis polythiophene with great yield and high electrical conductivity without post doping process. Polymer, 175. pp. 32-40. ISSN 00323861
Tiwari, S and Kumar, R and Menon, P K and Antony Jeyaseelan, A and Dutta, Soma and Pratap, R (2019) On the realization of self-sensing piezoelectric MEMS actuators. In: Proceedings of MARSS 2019: 4th International Conference on Manipulation, Automation, and Robotics at Small Scales, 1-5 July 2019, Helsinki, Finland.
Tribhuvanam, S and Nagaraja, HC and Naidu, VPS (2019) Arrhythmia classification with single beat ECG evaluation and support vector machine. International Journal of Innovative Technology and Exploring Engineering, 8 (12). pp. 1-7. ISSN 22783075
Vasanth, P and Kamalakannan, GM and Shivaraj, CS (2019) Study of Different Modelling Techniques of SMA Actuator and Their Validation Through Simulation. In: Emerging Research in Electronics, Computer Science and Technology.
Verma, KK and Padmakara, G and Gaddikeri, KM and Ramesh, Sundaram and Kumar, S and Bose, S (2019) The key role of thread and needle selection towards ‘through-thickness reinforcement’ in tufted carbon fiber-epoxy laminates. Composites Part B: Engineering, 174. ISSN 13598368
Vigneshwaran, S and Sivaprasad, K and Narayanasamy, R and Venkateswarlu, K (2019) Microstructure and mechanical properties of Al – 3Mg – 0.25 Sc alloy sheets produced by cryorolling. Materials Science and Engineering: A, 740-41. pp. 49-62. ISSN 09215093
Vigneshwaran, S and Sivaprasad, K and Narayanasamy, R and Venkateswarlu, K (2019) Superior Strength with Enhanced Fracture Resistance of Al-Mg-Sc Alloy Through Two-Step Cryo Cross Rolling. Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 50 (7). pp. 3265-3281. ISSN 10735623
Vijaykumar, MP and Rangaraj, L and Raja, S (2019) Synthesis and characterization of high-performance epoxy/ Ti3AlC2-reinforced conductive polymer composites. Journal of Composite Materials, 53 (26-27). pp. 3861-3874. ISSN 00219983
Winson, D and Choudhury, Balamati and Selvakumar, N and Barshilia, Harish C and Nair, RU (2019) Design and Development of a Hybrid Broadband Radar Absorber Using Metamaterial and Graphene. IEEE Transactions on Antennas and Propagation, 67 (8). pp. 5446-5452. ISSN 0018926X
Yathirajam, B and Vaitheeswaran, SM and Ananda, CM (2019) Scale estimation of monocular SLAM using direct acceleration pair measurements. In: ACM International Conference Proceeding Series.
