 | Up a level |
Amulya, TM and Naidu, VPS (2018) A Brief Exposition on Brain-Computer Interface. Control and Data Fusion e-Journal, 2 (4). pp. 30-43. ISSN 2581-5490
Dangi, A and Biswas, A and Sarkar, A and Kashyap, S and Chattopadhyay, K and Barshilia, Harish C and Basu, B (2018) Enhancing spectrally selective response of W/WAlN/WAlON/Al2O3 – Based nanostructured multilayer absorber coating through graded optical constants. Solar Energy Materials and Solar Cells, 176. pp. 157-166. ISSN 09270248
Dhanush, S and Sreejesh, M and Bindu, K and Chowdhury, P and Nagaraja, HS (2018) Synthesis and electrochemical properties of silver dendrites and silver dendrites/rGO composite for applications in paracetamol sensing. Materials Research Bulletin, 100. pp. 295-301. ISSN 00255408
Fletcher, J.K. and Parker, D.J. and Hunt, K.M.R. and Vishwanathan, G. and Mrudula, G (2018) The interaction of Indian monsoon depressions with northwesterly midlevel dry intrusions. Monthly Weather Review, 146 (3). pp. 679-693. ISSN 00270644
Gnanavel, S and Ponnusamy, S and Mohan, L and Radhika, R and Muthamizhchelvan, C and Ramasubramanian, K (2018) Electrochemical Behavior of Biomedical Titanium Alloys Coated with Diamond Carbon in Hanks’ Solution. Journal of Materials Engineering and Performance, 27 (4). pp. 1635-1641. ISSN 10599495
Hiremath, CP and Senthilnathan, K and Naik, KK and Guha, A and Tewari, A (2018) Numerical Study and Experimental Validation of Effect of Varying Fiber Crack Density on Stiffness Reduction in CFRP Composites. Journal of Materials Engineering and Performance, 27 (4). pp. 1685-1693. ISSN 10599495
Jagannathan, N and Gururaja, S and Manjunatha, CM (2018) Probabilistic strength based matrix crack evolution model in multi directional composite laminates under fatigue loading. International Journal of Fatigue, 117. pp. 135-147.
Jaya Christiyan, KG and Chandrasekhar, U and Rajesh Mathivanan, N and Venkateswarlu, K (2018) Influence of manufacturing parameters on the strength of PLA parts using Layered Manufacturing technique: A statistical approach. In: International Conference on Advances in Materials and Manufacturing Applications (IConAMMA-2017) , Bengaluru, India, 17–19 August 2017, Bengaluru.
Kadam, M and Gopalsamy, B and Bujurke, AA and Joshi, KM (2018) Estimation of static burst pressure in unflawed high pressure cylinders using nonlinear FEA. Thin-Walled Structures, 126. pp. 79-84. ISSN 02638231
Kumar, A and Karadan, P and Barshilia, Harish C (2018) Synthesis of silver nanowires towards the development the ultrasensitive AgNWs/SiNPLs hybrid photodetector and flexible transparent conductor. Materials Science in Semiconductor Processing, 75. pp. 239-246. ISSN 13698001
Masood, SN and Viswamurthy, SR and Singh, AK and Muthukumar, M and Gaddikeri, KM (2018) Simulation and validation of disbond growth in co-cured composite skin–stringer specimens using cohesive elements. Journal of Composite Materials, 52 (6). pp. 807-822. ISSN 00219983
Nandana, MS and Udaya Bhat, K and Manjunatha, CM (2018) Effect of Retrogression Heat Treatment Time on Microstructure and Mechanical Properties of AA7010. Journal of Materials Engineering and Performance, 27 (4). pp. 1628-1634. ISSN 10599495
Patra, N and Prajapat, C.L. and De, R and Rao, KD and Barshilia, Harish C (2018) Correlation of structural ordering with magnetic properties of pulsed laser deposited Co2FeGa Heusler alloy thin films. Journal of Alloys and Compounds, 748. pp. 653-670. ISSN 09258388 (In Press)
Prakashaiah, BG and Vinaya Kumara, D and Anup Pandith, A and Nityananda Shetty, A and Amitha Rani, BE (2018) Corrosion inhibition of 2024-T3 aluminum alloy in 3.5% NaCl by thiosemicarbazone derivatives. Corrosion Science, 136. pp. 326-338. ISSN 0010938X
Raju, SV and Godwal, BK and Singh, AK and Jeanloz, R and Saxena, SK (2018) High-pressure strengths of Ni3Al and Ni-Al-Cr. Journal of Alloys and Compounds, 741. pp. 642-647. ISSN 09258388
Roopa, S and Narasimhan, SV (2018) Magnitude Square Coherence (MSC) Estimation via an ARMA Model Based on Analytic DCT and Group Delay. Circuits, Systems, and Signal Processing, 37 (3). pp. 1203-1222. ISSN 0278081X
Sane, AU and Padole, PM and Manjunatha, CM and Uddanwadiker, RV and Jhunjhunwala, P (2018) Mixed mode cohesive zone modelling and analysis of adhesively bonded composite T-joint under pull-out load. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40 (3). ISSN 16785878
Santhana Krishnan, G and Thomas, P and Naveen, S and Murali, N (2018) Molecular and thermal studies of carbon fiber precursor polymers with low thermal-oxidative stabilization characteristics. Journal of Applied Polymer Science, 135 (25). pp. 1-15. ISSN 00218995
Sellarajan, B and Saravanan, P and Ghosh, SK and Nagaraja, HS and Barshilia, Harish C and Chowdhury, P (2018) Shape induced magnetic vortex state in hexagonal ordered cofe nanodot arrays using ultrathin alumina shadow mask. Journal of Magnetism and Magnetic Materials, 451. pp. 51-56. ISSN 03048853
Setti, S and Naidu, VPS (2018) Gearbox Health Condition Monitoring: A brief exposition. Control and Data Fusion e-Journal, 2 (4). pp. 13-23. ISSN 2581-5490
Sibin, K P and Srinivas, G and Shashikala, HD and Arjun, Dey and Sridhara, N and Sharma, AK and Barshilia, Harish C (2018) Optical and electrical studies of sputter-deposited transparent and conducting ITO/Ag/ITO multilayer on Kapton® substrate for transparent flexible electronic applications. In: Second International Conference on Large Area Flexible Microelectronics (ILAFM 2016), December 20th-22nd, 2016.
Sibin, K.P. and Mary Esther, A.C. and Shashikala, H.D. and Dey, A. and Sridhara, N. and Sharma, A.K. and Barshilia, H.C. (2018) Environmental stability of transparent and conducting ITO thin films coated on flexible FEP and Kapton® substrates for spacecraft applications. Solar Energy Materials and Solar Cells, 176. pp. 134-141. ISSN 09270248
Sreevidya, PV and Khan, Jakeer and Barshilia, Harish C and Ananda, CM and Chowdhury, P (2018) Development of two axes magnetometer for navigation applications. Journal of Magnetism and Magnetic Materials, 448. pp. 298-302. ISSN 03048853
Sugun, BS and Sandeep, DN (2018) Integral weaving of orthogonal 3D ‘T’ stiffeners based on pleat weaving concept. Journal of Industrial Textiles, 47 (7). pp. 1626-1644. ISSN 15280837
Verma, SB and Chidambaranathan, M and Hadjadj, A (2018) Analysis of shock unsteadiness in a supersonic over-expanded planar nozzle. European Journal of Mechanics, B/Fluids, 68. pp. 55-65. ISSN 09977546
Vigneshwaran, S and Sivaprasad, K and Narayanasamy, R and Venkateswarlu, K (2018) Formability and fracture behaviour of cryorolled Al-3 Mg-0.25 Sc alloy. Materials Science and Engineering A, 721. pp. 14-21. ISSN 09215093
Viswanathan, S. and Mohan, L and Bera, Parthasarathi and Swaroop, S. Shanthi and Muniprakash, M and Barshilia, Harish C and Anandan, C (2018) Corrosion and wear resistance properties of multilayered diamond‐like carbon nanocomposite coating. Surface and Interface Analysis, 50. pp. 265-276.
Yoganandan, G and Balaraju, JN and Manikandanath, NT and Ezilselvi, V and Srivastava, Meenu and Naga Charan, KV and Anilchandra, AR and Manjunatha, CM (2018) Surface and Electrochemical Characteristics of Novel Chromate-Free Mn-V Oxyanion Sealed Tartaric–Sulfuric Acid Anodized Coating. Journal of Materials Engineering and Performance, 27. pp. 6175-6188.
