 | Up a level |
Amirthan, G and UdayaKumar, A and Prasad, VVB and Balasubramanian, M (2010) Solid particle erosion studies on biomorphic Si/SiC ceramic composites. Wear, 268. pp. 145-152. ISSN 0043-1648
Aruna, ST and Kini, NS and Shetty, Satish and Rajam, KS (2010) Synthesis of nanocrystalline CeAlO3 by solution-combustion route. Materials Chemistry and Physics, 119. pp. 485-489.
Barshilia, Harish C and Ghosh, Moumita and Shashidhara, Acharya and Rajarama, Krishna and Rajam, KS (2010) Deposition of TiAlSiN nanocomposite coatings using four-cathode reactive direct current unbalanced magnetron sputtering system. In: International Conference on Surface Modification Technologies XXIII, November 2-5, 2009, GRT Temple Bay, Mamallapuram.
Barshilia, Harish C and Ghosh, Moumita and Shashidhara, Acharya and Suresh, T.N. and Rajam, KS (2010) Characterization of TiAlCrYN nanocomposite coatings prepared using four-cathode reactive unbalanced direct current magnetron sputtering system. In: International Conference on Nanomaterials and Nanotechnology, 13-16 Dec 2010, KS Rangasamy College of Technology, Tiruchengode.
Barshilia, Harish C and Moumita, Ghosh and Shashidhara, Acharya and Raja, Ramakrishna and Rajam, KS (2010) Deposition and characterization of TiAlSiN nanocomposite coatings prepared by reactive pulsed direct current unbalanced magnetron sputtering. Applied Surface Science, 256 (21). pp. 6420-6426. ISSN 0042-207X
Barshilia, Harish C and Sai Tej, K.R. and Mayura Devi, L and Rajam, KS (2010) Nanometric multiscale rough Zn-ZnO superhydrophobic thin films: Self-diffusion of zinc and effect of UV irradiation. Journal of Applied Physics, 108 (074315). ISSN 0021-8979
Barshilia, Harish C and Shashidhara, Acharya and Moumita, Ghosh and Suresh, T.N. and Rajam, KS and Konchady, Manohar and Pai, Devdas and Sankar, Jagannathan (2010) Performance evaluation of TiAlCrYN nanocomposite coatings deposited using four-cathode reactive unbalanced pulsed direct current magnetron sputtering system. Vacuum, 85. pp. 411-420. ISSN 0042-207X
Barshilia, Harish C and Moumita, Ghosh and Raja, Ramakrishna and Rajam, KS (2010) Deposition and characterization of TiAlSiN nanocomposite coatings prepared by reactive pulsed direct current unbalanced magnetron sputtering. Applied Surface Science, 256. pp. 6420-6426.
Chowdhury, P and Barshilia, Harish C and Rajam, KS and Mishra, PK and Prajapat, C.L. and Sridhara Rao, DV (2010) Role of oxygen impurity in growth and magnetic properties of Ni83Fe17 permalloy thin films. Journal of Magnetism and Magnetic Materials, 322 (21). pp. 3266-3270. ISSN 0304-8853
Chowdhury, P and Raghuvaran, K and Krishnan, M and Shivakumara, C and Barshilia, Harish C and Rajam, KS (2010) Anodic alumina template assisted growth of Co nano-wires. In: International Conference on Nanomaterials and Nanotechnology, 13-16 Dec 2010, KS Rangasamy College of Technology, Tiruchengode.
Deepthi, B and Barshilia, Harish C and Rajam, KS and Konchady, Manohar and Pai, Devdas and Sankar, Jagannathan (2010) Mechanical and tribological properties of sputter deposited nanostructured Cr-WS2 solid lubricant coatings. Surface and Coatings Technology, 205. pp. 1937-1946. ISSN 0257-8972
Deepthi, B and Barshilia, Harish C and Rajam, KS and Konchady, Manohar and Pai, Devdas and Sankar , Jagannathan and Kvit, Alexander (2010) Structure, morphology and chemical composition of sputter deposited nanostructured Cr-WS2 solid lubricant coatings. Surface and Coatings Technology, 205. pp. 565-574. ISSN 0257-8972
Deepthi, B and Devi, Mayura and Barshilia, Harish C and Rajam, KS (2010) Low friction Cr-WS2 nanocomposite coatings prepared using magnetron sputtering. In: International Conference on Surface Modification Technologies XXIII, November 2-5, 2009, GRT Temple Bay, Mamallapuram.
Deepthi, B and Devi, Mayura and Barshilia, Harish C and Rajam, KS (2010) Nanostructured Cr-WS2 solid lubricant coatings prepared using magnetron sputtering. In: International Conference on Nanomaterials and Nanotechnology, KS Rangasamy College of Technology, Tiruchengode.
Deshpande, SM and Ramesh, V and Malagi, Keshav and Arora, Konark (2010) Least squares kinetic upwind mesh-free method. Defence Science Journal, 60 (6). pp. 583-597. ISSN 0011-748X
Dutta, Soma and Jeyaseelan, Antony and Sabina, JEJ and Guddadam, M and Shubha, V (2010) Acousto ultrasonic method for structural health monitoring using insitu Piezoelectric Coating. Project Report. National Aerospace Laboratories, Bangalore, India.
Dutta, Soma and Jeyaseelan, Antony and Sabina, JEJ and Shubha, V (2010) Insitu piezoceramic coating for acouso ultrasonic testing. In: National Conference on Microsystems, Smart Materials, Structures: ISSS 10, Sept. 2010, Visvesvaraya National Institute of Technology, Nagpur, India.
George, S and Goravar, S and Mishra, D and Shyamsunder, MT and Sharma, P and Padmasree, GK and Sanjeev Kumar, S and Bremond, P and Mukherjee, K (2010) Stress monitoring and analysis using lock-in thermography. Insight - Non-Destructive Testing and Condition Monitoring, 52 (9). 470-474(5). ISSN 1354-2575
Guruprasad, R and Khaiser Nikam, KN (2010) Patterns of Use of Aerospace Engineering e-Technical Reports by the Indian Aerospace Scientists and Engineers in Bangalore: A Research Study. Journal of Aerospace Sciences and Technology, 62 (4). pp. 261-272. ISSN 0972-950X
Guruprasad, R and Khaiser Nikam, KN (2010) Study of the Patterns of Use of e-Resources in Aerospace Engineering by the Indian Aerospace Scientists and Engineers of Selected Aerospace Organizations in Bangalore: Part – I – Use of e-Journals. Technical Report. KELPRO Bulletin, 14(1), Bangalore.
Guruprasad, R and Khaiser Nikam, KN and Mudkavi, Vidyadhar Y (2010) Scholarly Electronic Communication Amongst the Aerospace Engineering Community and the Impact of Electronic Journals: A Review Study". SRELS Journal / "Scholarly Electronic Communication Amongst the Aerospace Engineering Community and the Impact of Electronic Journals: A Review Study, Vol. 4 (No.4). pp. 395-425.
Guruprasad, R and Nikam, Khaiser (2010) E-Journals and their Usage Patterns Amongst the Indian Aerospace Scientists and Engineers in Bengaluru. E-Journals and their Usage Patterns Amongst the Indian Aerospace Scientists and Engineers in Bengaluru, 30 (6). pp. 31-38. ISSN Print 0971-4383
Guruprasad, R and Nikam, Khaiser (2010) Effect of reading e-journals on the research of aerospace scientists and engineers. Annals of Library and Information Studies / Effect of reading e-journals on the research of aerospace scientists and engineers, 57 (4). pp. 373-379. ISSN 0975-2404 (Online), 0972-5423 (Print)
Jarali, Chetan S and Raja, S and Upadhya, AR (2010) Constitutive modeling of SMA SMP multifunctional high performance smart adaptive shape memory composite. Smart Materials and Structures, 19 (10). ISSN 0964-1726
Jayasankar, S and Senthil Kumar, P and Kamaleshaiah, MS and Satisha, - and Prashanth, NS and Sateesh, VL and Alfred Paul, Singh and Gangadhar, S and Dayananda, GN (2010) Development of SMA Based Smart Trimming Surface for Typical Civil Aircraft Applications. Project Report. National Aerospace Laboratories, Bangalore.
Jigar, Sura and Ramamurthy, S and Niyati, Shah (2010) Digital Simulation of Engine Operating Characteristics. In: 3rd International Conference on Advances in Mechanical Engineering (ICAME 2010), 4-6th January 2010, SVNIT,Surat.
Krishna, KG and Singh, Nidhi and Venkateswarlu, K and Kumar, KC Hari (2010) Tensile Behavior of Ultrafine-Grained Al-4Zn-2Mg Alloy Produced by Cryorolling. Journal of Materials Engineering and Performance, 20 (9). pp. 1569-1574. ISSN 1059-9495
Kumar, AS and Kumar, BR and Datta, GL and Ranganath, VR (2010) Effect of microstructure and grain size on the fracture toughness of a micro-alloyed steel. Materials Science and Engineering A, 527 (4-5). pp. 954-960. ISSN 0921-5093
Kumar , R and Venkatakrishnan, L and Wiley, Alex and Alvi, Farukh (2010) Role of coherent structures in supersonic impinging jet noise and its control. In: 16th AIAA/CEAS Aeroacoustics Conference, 7-9 Jun 2010, Stockholm, Sweden.
Kumaresan, G and Saraf, Amitabh (2010) Flight calibration of flow angularity sensors on Tejas using advanced parameter estimation techniques. International Journal of Aerospace Innovations, 2 (1 - 2 ). pp. 57-68. ISSN 1757-2258
Liermann, HP and Jain, Anjana and Singh, AK and Saxena, SK (2010) Compression of silver in a diamond anvil cell: Pressure dependences of strength and grain size from X-ray diffraction data. Journal of Physics and Chemistry of Solids, 71. pp. 1088-1093. ISSN 0022-3697
Majeed, M and Kar, IN (2010) Calibration of air data systems using extended kalman filtering technique. International Journal of Aerospace Innovations, 2 (1-2). pp. 133-146. ISSN 1757-2258
Majumdar, Sekhar and Rajani, BN and Kulkarni, DS and Subrahmanya, MB (2010) Numerical simulation of incompressible turbulent flow using linear eddy viscosity-based turbulence models. Defence Science Journal, 60 (6). pp. 614-627. ISSN 0011-748X
Mandal, AC and Venkatakrishnan, L and Dey, J (2010) A study on boundary-layer transition induced by free-stream turbulence. Journal of Fluid Mechanics, 660. pp. 114-146. ISSN 0022-1120
Manisankar, C and Sajeer, Ahmed and Thiagarajan, V (2010) Investigation of starting process of a movable intake configuration at high supersonic speeds. In: Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 Dec 2010, Dhaka, Bangladesh.
Manjunatha, CM and Taylor, AC and Kinloch, AJ and Sprenger, S (2010) The tensile fatigue behaviour of a silica nanoparticle-modified glass fibre reinforced epoxy composite. Composites Science and Technology, 70 (1). pp. 193-199. ISSN 0266-3538
Mohan, Kumar M and Jagannathan, N and Jeeva, Peter M and Ravi, Kumar S (2010) Hygrothermal effects on the mechanical properties of glass fibre-epoxy composite material. In: Proceedings of Second International Conference on Polymer Processing and Characterization , 15-17 Jan 2010, Kottayam, Kerala.
Nachiappan, C and Rangaraj, L and Divakar, V (2010) Synthesis and Densification of Monolithic ZrC by reactive Hot pressing. Journal of American Ceramic Society, 93 (5). pp. 1341-1346.
Rangaraj, L and Divakar, C and Jayaram, V (2010) Reactive hot pressing of ZrB2–ZrCx ultra-high temperature ceramic composites with the addition of SiC particulate. Journal of the European Ceramic Society, 30. pp. 3263-3266. ISSN 0955-2219
Rangaraj, L and Divakar, C and Vikram, Jayaram (2010) Fabrication and mechanisms of densification of ZrB2-based ultra high temperature ceramics by reactive hot pressing. Journal of the European Ceramic Society, 30 (1). pp. 129-138. ISSN 0955-2219
Rathod, VT and Mahapatra, D Roy and Jain, Anjana and Gayathri, A (2010) Characterization of large-area PVDF thin film for electro-mechanical and ultrasonic sensing applications. Sensors and Actuators A: Physical , 163. pp. 164-171. ISSN 0924-4247
Rathod, VT and Mahapatra, D Roy and Anjana, Jain and Gayathri, A (2010) Characterization of a large-area PVDF thin film for electro-mechanical and ultrasonic sensing applications. Sensors and Actuators, A: Physical, 163 (1). pp. 164-171. ISSN 09244247
Ravishankar, S and Dutt, HNV and Gurumoorthy, B (2010) Automated inspection of aircraft parts using a modified ICP algorithm , H. N. V. Dutt and B. International Journal of Manufacturing Technology, 46 (1-4). pp. 227-236.
Selvakumar, N and Barshilia, Harish C and Rajam, KS and Biswas, A (2010) Structure, optical properties and thermal stability of pulsed sputter deposited high temperature HfOx/Mo/HfO2 solar selective absorbers. Sol. Energy Mater. Sol. Cells, 94 (8). pp. 1412-1420. ISSN 0927-0248
Selvakumar, N and Barshilia, Harish C and Ramesh, M and Rajam, KS (2010) Effect of substrate roughness on the contact angle of sputter deposited superhydrophobic polytetrafluoroethylene coatings. In: 23rd International Conference on Surface Modification Technologies (SMT 23), 2-5 Nov 2009, Mamallapuram.
Singh, GK and Claassens, J (2010) An analytical solution for the inverse kinematics of a redundant 7DoF Manipulator with link offsets. In: International Conference on Intelligent Robots and Systems (IROS) 2010 IEEE/RSJ , 18-22 Oct. 2010, Taipei, Taiwan .
Singh, KP and Mathur, JS and Ashok, V and Chakraborty, Debasis (2010) Computational fluid dynamics in aerospace industry in India. Defence Science Journal, 60 (6). pp. 639-652. ISSN 0011-748X
Singh, Manish K and Ramesh, V and Balakrishnan, N (2010) Convergence Acceleration of Mesh-less Euler Solver. In: 12th annual AeSI CFD Symposium, 11-12 August , Indian Institute of Science, Bangalore. (Submitted)
Singha, Sintu and Sinhamahapatra, KP (2010) Flow past a circular cylinder between parallel walls at low Reynolds numbers. Ocean Engineering, 37. pp. 757-769. ISSN 0029-8018
Srilatha, Y and Barshilia, Harish C and Rajam, KS (2010) Hard And Tough Nanostructured Coatings - A Critical Review. Project Report. National Aerospace Laboratories, Bangalore.
Srilatha, Y and Barshilia, Harish C and Rajam, KS (2010) Hard and tough nanostructured coatings: A critical review. Project Report. NAL.
Sudagar, Jothi and Venkateswarlu, K and Lian, Jainshe (2010) Dry sliding wear properties of a 7075-T6 aluminum alloy coated with Ni-P (h) in different pretreatment conditions. Journal of Materials Engineering and Performance, 19 (6). pp. 810-818. ISSN 1059-9495
TADASHIGE , IKEDA, and TETSUHIKO , UEDA and Raja, SAMIKKANNU (2010) Deformation of a Beam with Partially Debonded Piezoelectric Actuators. Journal of Intelligent Material Systems and Structures. pp. 453-468.
Vaitheeswaran, SM and Venkatanarayana, KG and Kanth, B Sashi (2010) Vector field guidance for path following of MAVs in three dimensions for variable altitude maneuvers. International Journal of Micro Air Vehicles, 2 (4). pp. 255-265. ISSN 1756-8293
Venkateswarlu, K and Rajinikanth, V and Ajoy Kumar, Ray and Cheng, XU (2010) The characteristics of aluminum–scandium alloys processed by ECAP. Materials Science and Engineering A, 527. pp. 1448-1452.
Venkateswarlu, K and Rajinikanth, V and Ray, AK and Xu, Cheng (2010) Effect of a scandium addition on an Al-2% Si alloy processed by ECAP. Reviews on Advanced Materials Science, 25. pp. 99-106. ISSN 1605-8127
Venkateswarlu, K and Rajinikanth, V and Sen, Mani Kuntal and Alhajeri, SN and Langdon, TG (2010) Application of High-Pressure Torsion to Al-Si Alloys with and without Scandium Additions. Materials Science Forum, 667 - . pp. 743-748.
Verma, SB and Haidn, O (2010) Flow characteristics of overexpanded rocket nozzles. International Journal of Aerospace Innovations, 2 (4). pp. 259-277. ISSN 1757-2258
Verma, SB and Stark, R and Nuerenberger-Genin, C and Hakin, O (2010) Cold-gas experiments to study the flow separation characteristics of a dual-bell nozzle during its transition modes. Shock Waves, 20. pp. 191-203.
