 | Up a level |
Aravind, and Somenath, Mukharjee (2005) A Theoretical Formulation For Flutter Analysis Of A Typical Subsonic Aircraft Wing (SARAS) Using Quasi-steady Aerodynamic Theory. Project Report. National Aerospace Laboratories, Bangalore.
Aruna, ST and Diwakar, S and Anjana, Jain and Rajam, KS (2005) Comparative study on the effect of current density on Ni and Ni-Al nanocomposite coatings produced by electrolytic deposition. Surface Engineering, 21 (3). pp. 209-214. ISSN 0267-0844
Asokan, K and Anil Kumar , CV and Dasan, J and Radhakrishnan, K and Satheesh Kumar, K and Ramamohan, TR (2005) Review of chaos in the dynamics and rheology of suspensions of orientable particles in simple shear flow subject to an external periodic force. Journal of Non-Newtonian Fluid Mechanics, 129. pp. 128-142.
Barshilia, Harish C and Rajam, KS and Sridhara Rao, DV (2005) Characterization of low temperature deposited nanolayered TiN/NbN multilayer coatings by cross-sectional transmission electron microscopy. Surface amp; Coatings Technology, 200 (14-15). pp. 4586-4593.
Barshilia, Harish C and Surya Prakash, M and Sridhara Rao, DV and Rajam, KS (2005) Superhard nanocomposite coatings of TiN/a-C prepared by reactive DC magnetron sputtering. Surface and Coatings Technology, 195. pp. 147-153.
Bhaumik, SK and Sujata, M and Krishnan, RV (2005) Fatigue failure of engineering structures13;. Transactions of the Indian Institute of Metals, 58 (2-3). pp. 187-196.
Girija, G and Zorn, Christopher and Koch, Andreas (2005) Multisensor Data Fusion for Sensor Failure Detection and Health Monitoring 2005-5843. In: AIAA Guidance, Navigation, and Control Conference and Exhibit, 15-18 August 2005, San Francisco, California.
Hansa, 3 (2005) First flight of HANSA-313;. [Image]
Hansa, 3 (2005) HANSA -3 receives JAR-VLA certification13;. [Image]
Kapadi, Yogesh and Pashilkar, AA (2005) Aero-Thermodynamic Model for Digital Simulation of Turbofan Engine. Project Report. National Aerospace Laboratories, Bangalore.
Krishna, CN Sai and Ramaiah, KV and Bhaumik, SK (2005) Strain response of Ni-Ti-Cu shape memory alloy wires on thermo-mechanical cycling. In: 59th Annual Technical Meeting of the Indian Institute of Metals, 15-16 Nov 2005, Chennai, India.
Krishna, CN Sai and Ramaiah, KV and Bhaumik, SK (2005) Strain response of Ni-Ti-Cu shape memory alloy wires on thermo-mechanical cycling. Transactions of the Indian Institute of Metals, 58 (5). ISSN 0972-2815
Kumar, D Nagendra and Raja, S and Yadav, D (2005) Active vibration control of composite plate with partially13; debonded piezoelectric actuators. In: International Conference on Smart Materials Structures and Systems, 28-30 Jul 2005, Bangalore, India.
Liermann, HP and Singh, AK and Manoun, B and Saxena, SK and Zha, CS (2005) Compression behavior of TaC0.98 under nonhydrostatic13; and quasi-hydrostatic pressures up to 76 GPa. International Journal of Refractory Metals and Hard Materials, 23. pp. 109-114.
Narasimhan, SV and Hazarathaiah, M and Giridhar, PVS (2005) Channel blind identixFB01;cation based on cyclostationarity13; and group delay. Signal Processing, 85. pp. 1275-1286.
Narasimhan, SV and Pavanalatha, S (2005) Estimation of evolutionary spectrum based on short time Fourier transform and modified group delay. Signal Processing, 84 (11). pp. 2139-2152. ISSN 0165-1684
Parameswaran, V and Jategaonkar, RV and Press, M (2005) Five-Hole Flow Angle Probe Calibration from Dynamic and Tower Flyby Maneuvers. Journal of Aircraft, 42 (1). pp. 80-86. ISSN 0021-8669
Rahul Kumar, C and Radhakrishna, K and Rao, RMVGK (2005) Postcuring effects on impact behavior of glass/epoxy composite laminates. Journal of Reinforced Plastics and Composites, 24 (9). pp. 949-960. ISSN 0731-6844
Raja, D and Sreedeep, R and Pashilkar, AA and Kamesh, JV (2005) Active flutter suppression of a composite plate with PZT multilayered benders using LQG control. In: International Conference on Smart Materials Structures and Systems, 28-30 Jul 2005, Bangalore, India.
Singh, AK and Akahama, Y and Kawamura, H and Menendez, PE and Gutierrez, G (2005) Nonhydrostatic compression of bismuth to 222 GPa: Some constraints on elasticity of the bcc-phase. Journal of Physics and Chemistry of Solids, 67 (9-10). pp. 2192-2196.
Singh, AK and Anjana, Jain and Liermann, HP and Saxena, SK (2005) Strength of iron under pressure up to 55 GPa from X-ray diffraction line-width analysis13;. Journal of Physics and Chemistry of Solids, 67 (9-10). pp. 2197-2202.
Subramanya, HY and Viswanath, S and Narasimhan, R (2005) A three-dimensional numerical study of mixed mode (I and II) crack tip fields in elastic-plastic solids. International Journal of Fracture, 136 (1-4). pp. 167-185. ISSN 0376-9429
Sundaram, R and Gupta, N and Rao, MS (2005) Structural health monitoring of co-cured composite structures using FBG sensors13;. Proceedings of the SPIE - The International Society for Optical Engineering, 5764 (1). pp. 559-570.
0003NF/2006 (2005) Superconductive contacts in bulk oxide superconductors for high-current applications and method for forming the same (003NF/2006). 0003NF/2006.
Varughese, Byji and Kishore, A and Radhakrishna, K and Subba Rao, M (2005) Buckling and Postbuckling studies on stiffened composite13; panels with circular cutouts. In: Isampe National Conference on Composites / INCCOM IV, 9-10 Dec 2005, Coimbatore, India.
Venkatesh, TN and Sarasamma, VR and Rajalakshmy, S and Sahu, Kirti Chandra and Govindarajan, Rama (2005) Super-linear speed-up of a parallel multigrid Navier-Stokes solver on Flosolver. Current Science, 88 (4). pp. 589-593.
Yadav, R and Jugseniya, Chandrakant B and Pashilkar, AA (2005) Thermodynamic analysis of turbofan engine. In: ASME Turbo Expo 2005: Power for Land, Sea, and Air (GT2005) , June 6–9, 2005, Reno, Nevada, USA .
Yadav, R and Kapadi, Yogesh and Pashilkar, AA (2005) Aero-thermodynamic model for digital simulation of turbofan engine. In: ASME Turbo Expo 2005: Power for Land, Sea, and Air (GT2005) , June 6–9, 2005 , Reno, Nevada, USA.
