 | Up a level |
Amirthan, G and UdayaKumar, A and Balasubramanian, N (2011) Thermal conductivity studies on Si/SiC ceramic composites. Ceramics International, 37. pp. 423-426. ISSN 0272-8842
Kannan, CR and Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of cracked NLG brackets. Project Report. National Aerospace Laboratories, Bangalore, India.
Khirwadkar, SS and Singh, KP and Patil, Y and Khan, MS and Buch, JJU and Patel, Alpesh and Tripathi, S and Jaman, PM and Rangaraj, L and Divakar, C (2011) Fabrication and characterization of tungsten and graphite based PFC for divertor target elements of ITER like tokamak application. Fusion Engineering and Design, 86. pp. 1736-1740. ISSN 0920-3796
Madan, M and Bhaumik, SK and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of TGB control lever. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Bhuvana, R and Sujata, M and Bhaumik, SK (2011) Hardness survey and microstructural study of samples belonging to collector pinions of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of damages on the compressor blades of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of deposits collected from the main fuel pump of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of deposits collected from the pipelines and ECS shut-off valve of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of failed collector pinions of a Helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of burst pipe of oxygen charging trolley. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of components belonging to a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of components retrieved from the wreckage of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Mallanna, S and Sujata, M (2011) Analysis of welded samples from AP-pipeline. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Raghavendra, K and Sujata, M and Bhaumik, SK (2011) Failure analysis of welded stainless steel heat exchanger tube. Project Report. National Aerospace Laboratories, Bangalore, India, Bangalore, India.
Madan, M and Raghavendra, K and Sujata, M and Bhogle, Srinivas (2011) Analysis of debris collected from clogged filter element. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Raghavendra, K and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of compressor and gas generator blades belonging to an engine of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Analysis of engine oil debris. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Analysis of fractured bearings of wheel hub of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Failure Analysis of burst tyre of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of O-rings. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of centre perspex panel of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of nose wheel hub of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of propeller reduction gear shaft of indigenous rotary engine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of suspension device fitted with antenna of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of tail strut assembly of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of ‘O’ ring belonging to an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Bhaumik, SK (2011) Metallurgical analysis of Sponson bush of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Analysis of components of aeroengine retrieved from the wreckage of an Aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Analysis of damaged aero-engine blade of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Analysis of damaged aero-engine blades. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Analysis of debris collected from the main oil filter of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Analysis of failed skin bottom of nose belly panel of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure Analysis of Bearings of Accessory Gearbox of an aero-engine. Project Report. National Aeronautical Laboratory, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure Analysis of LP turbine of an Aero-engine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of AMAGB lube pump gears. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of LH top root fitting of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of an aeroengine components. Project Report. National Aeronautical Laboratory, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of compressor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of input pinion of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of pipe assembly of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Metallurgical failure analysis of piston rings. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Microstructural study of turbine blades material of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure Analysis of Bearings and Gears of Accessory Gearbox of an Aero-engine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure Analysis of Rotor Blades of Steam Turbine Generator of a captive power plant. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of IC engine valve. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of a sheared 2” steam injection pipe of a vacuum heater. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of an engine fan and compressor blades. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of arch section tube in fired boiler of a captive power plant. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of high pressure flange in a reactor outlet. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of nose wheel assembly of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of undercarriage extension/retraction jack components of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Raghavendra, K and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of fractured HPTR blade of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Ranganath, VR and Bhaumik, SK (2011) Failure analysis of damaged pressure gauge/hose of an aircraft oxygen trolley. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of broken pin assembly an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of Banner Target Towing (BTT) Cables. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of first stage compressor rotor blades of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of wheel nut of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Venkataswamy, MA and Kannan, D and Bhaumik, SK (2011) Analysis of parts retrieved from the wreckage of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of outer flap of TVC heat shield. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of tail under carriage strut of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Sujata, M and Venkataswamy, MA and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of cracked steam drum of boiler of captive power plant. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Venkataswamy, MA and Bhaumik, SK (2011) Metallurgical analysis of components of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan , M and Sujata, M and Bhaumik, SK (2011) Analysis of cracked 5" tube of vacuum heater. Project Report. National Aerospace Laboratories, Bangalore, India.
Panda, PK (2011) Development of PZT Materials, Fabrication and Characterization of Multi Layered Actuators for Aerospace Applications. In: Proceedings of the International Workshop on Functional Materials (IWFM-2011) (AIP Conf. Proc. 1461), 20-22 Dec 2011, Berhampur, Odisha, India.
Rajinikanth, V and Venkateswarlu, K and Sen, Mani Kuntal and Das, M and Alhajeri, SN and Langdon, TG (2011) Influence of scandium on an Al–2% Si alloy processed by high-pressure torsion. Materials Science and Engineering , 528. pp. 1702-1706.
Ramaiah, KV and Saikrishna, CN and Ranganath, VR and Buravalla, V and Bhaumik, SK (2011) Fracture of thermally activated NiTi shape memory alloy wires. Materials Science and Engineering A, 528. pp. 5502-5510. ISSN 0921-5093
Singh, AK and Liermann, HP (2011) Strength and elasticity of niobium under high pressure. Journal of Applied Physics, 109 (113539). pp. 1-9. ISSN 0021-8979
Singh, KP and Pandya, SP and Khirwadkar, SS and Patel, Alpesh and Patil, Y and Buch, JJU and Khan, MS and Tripathi, S and Pandya, S and Govindarajan, J and Jaman, PM and Rathore, Devandra and Rangaraj, L and Divakar, C (2011) Pre-qualification of brazed plasma facing components of divertor target elements for ITER like tokamak application. Fusion Engineering and Design, 86. pp. 1741-1744. ISSN 0920-3796
Sujata, M and Madan, M and Bhaumik, SK (2011) Analysis of Rubber ‘O’ Ring Installed on ESN: 690 124. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Bhaumik, SK (2011) Analysis of crash helmet and survival kit items of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Bhuvana, R (2011) Examination of a damaged printed circuit board. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Raghavendra, K and Bhaumik, SK (2011) Failure Analysis of Nose LG Door Port of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of axial compressor rotor stage III of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of frame separation device of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of I stage compressor rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Metallurgical Failure Analysis of Collector Pinion of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Metallurgical Failure Analysis of Cracked ARIS Casing Ring of a Helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Metallurgical failure analysis of inter-rotor and inter-shaft bearings of aeroengines. Project Report. National Aerospace Laboratories, Bangalore, India.
UdayaKumar, A and Balasubramanian, M and Gopala, HB and Sampathkumaran, P and Seetharamu, S and Babu, Ramesh and Sathiyamoorthy, D and Reddy, GR (2011) Influence of the type of interface on the tribological characteristics of ICVI generated SiCf/SiC composites. Wear, 271. pp. 859-865. ISSN 0043-1648
UdayaKumar, A and Ganesh, A (2011) Effect of intermediate heat treatment on mechanical properties of SiCf/SiC composites with BN interphase prepared by ICVI. Journal of the European Ceramic Society, 31 (6). pp. 1145-1153. ISSN 0955-2219
UdayaKumar, A and Raole, PM and Balasubramanian, M (2011) Synthesis of tailored 2D SiCf/SiC ceramic matrix composites with BN/C interphase through ICVI. Journal of Nuclear Materials, 417 (1). pp. 363-366. ISSN 0022-3115
Venkata Ramaiah, K and Saikrishna, CN and Bhaumik, SK and Bhagyaraj, J and Gouthama, - (2011) TEM Studies on the Microstructural Changes during Thermomechanical Cycling of NiTi Shape Memory Alloy Wire. Materials Science Forum, 702-70. pp. 904-907.
