 | Up a level |
Amirthan, G and UdayaKumar, A and Prasad, VVB and Balasubramanian, M (2010) Solid particle erosion studies on biomorphic Si/SiC ceramic composites. Wear, 268. pp. 145-152. ISSN 0043-1648
Bhaumik, SK (2010) Root cause analysis in engineering failures. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 297-299. ISSN 0019-493X
Bhaumik, SK and Reddy, AV (2010) Fatigue failure of aircraft components. In: International Winter School on Advances in Aeronautical Materials and Technologies, 15-19, Dec 2010, Hyderabad, India.
Dutta, Soma and Jeyaseelan, Antony and Sabina, JEJ and Guddadam, M and Shubha, V (2010) Acousto ultrasonic method for structural health monitoring using insitu Piezoelectric Coating. Project Report. National Aerospace Laboratories, Bangalore, India.
Dutta, Soma and Jeyaseelan, Antony and Sabina, JEJ and Shubha, V (2010) Insitu piezoceramic coating for acouso ultrasonic testing. In: National Conference on Microsystems, Smart Materials, Structures: ISSS 10, Sept. 2010, Visvesvaraya National Institute of Technology, Nagpur, India.
Dutta, Soma and Shubha, V (2010) Non destructive acousto ultrasonic Method for structural health monitoring --- A review. Project Report. National Aerospace Laboratories, Bangalore, India.
Dutta, Soma and Shubha, V and Ramesh, TG (2010) Effect of pressure and temperature on thermopower of Bix2013;Sb alloys. Physica B: Condensed Matter, 405 (5). pp. 1239-1243.
Krishna, KG and Singh, Nidhi and Venkateswarlu, K and Kumar, KC Hari (2010) Tensile Behavior of Ultrafine-Grained Al-4Zn-2Mg Alloy Produced by Cryorolling. Journal of Materials Engineering and Performance, 20 (9). pp. 1569-1574. ISSN 1059-9495
Liermann, HP and Jain, Anjana and Singh, AK and Saxena, SK (2010) Compression of silver in a diamond anvil cell: Pressure dependences of strength and grain size from X-ray diffraction data. Journal of Physics and Chemistry of Solids, 71. pp. 1088-1093. ISSN 0022-3697
Nachiappan, C and Rangaraj, L and Divakar, V (2010) Synthesis and Densification of Monolithic ZrC by reactive Hot pressing. Journal of American Ceramic Society, 93 (5). pp. 1341-1346.
Panda, PK (2010) Process for the preparation of corrosion resistant silica coatings on metal. 242254.
Ramesh, TG and Shubha, V and Dutta, Soma (2010) Characterisation techniques for high temperature thermoelectric materials. In: National Workshop on ‘High Temperature Materials in Aerospace Applications’ , 8-9 Jan 2010, Anna University Chennai, India.
Rangaraj, L and Divakar, C and Jayaram, V (2010) Reactive hot pressing of ZrB2–ZrCx ultra-high temperature ceramic composites with the addition of SiC particulate. Journal of the European Ceramic Society, 30. pp. 3263-3266. ISSN 0955-2219
Rangaraj, L and Divakar, C and Vikram, Jayaram (2010) Fabrication and mechanisms of densification of ZrB2-based ultra high temperature ceramics by reactive hot pressing. Journal of the European Ceramic Society, 30 (1). pp. 129-138. ISSN 0955-2219
Rathod, VT and Mahapatra, D Roy and Jain, Anjana and Gayathri, A (2010) Characterization of large-area PVDF thin film for electro-mechanical and ultrasonic sensing applications. Sensors and Actuators A: Physical , 163. pp. 164-171. ISSN 0924-4247
Rathod, VT and Mahapatra, D Roy and Anjana, Jain and Gayathri, A (2010) Characterization of a large-area PVDF thin film for electro-mechanical and ultrasonic sensing applications. Sensors and Actuators, A: Physical, 163 (1). pp. 164-171. ISSN 09244247
Sudagar, Jothi and Venkateswarlu, K and Lian, Jainshe (2010) Dry sliding wear properties of a 7075-T6 aluminum alloy coated with Ni-P (h) in different pretreatment conditions. Journal of Materials Engineering and Performance, 19 (6). pp. 810-818. ISSN 1059-9495
Sujata, M and Madan, M and Raghavendra, K and Venkataswamy, MA and Bhaumik, SK (2010) Microstructural study: an aid to determination of failure mechanism in nickel base superalloy blades. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 681-685. ISSN 0019-493X
Venkateswarlu, K and Rajinikanth, V and Ajoy Kumar, Ray and Cheng, XU (2010) The characteristics of aluminum–scandium alloys processed by ECAP. Materials Science and Engineering A, 527. pp. 1448-1452.
Venkateswarlu, K and Rajinikanth, V and Ray, AK and Xu, Cheng (2010) Effect of a scandium addition on an Al-2% Si alloy processed by ECAP. Reviews on Advanced Materials Science, 25. pp. 99-106. ISSN 1605-8127
Venkateswarlu, K and Rajinikanth, V and Sen, Mani Kuntal and Alhajeri, SN and Langdon, TG (2010) Application of High-Pressure Torsion to Al-Si Alloys with and without Scandium Additions. Materials Science Forum, 667 - . pp. 743-748.
Venkateswarlu, K and Suman , Saurabh and Rajinikanth, V and Ranjan Kumar, Sahu and Ajoy Kumar, Ray (2010) Synthesis of TiN Reinforced Aluminium Metal Matrix Composites Through Microwave Sintering. Material Engineering and Performance, 19. pp. 231-236. ISSN 1059-9495
