 | Up a level |
Anjana, Jain and Vijayan, Kalyani (2007) Effect of thermal aging on the crystal structural characteristics of TEFLON. Polymer Engineering and Science, 47 (11). 1724 -1729.
Balaraju, JN and Jahan, SM and Anjana, Jain and Rajam, KS (2007) Structure and phase transformation behavour of electroless NI-P alloys containing tin and tungsten. Journal of Alloys and Compounds, 436. p. 319.
Balaraju, JN and Jahan, SM and Jain, Anjana and Rajam, KS (2007) Structure and phase transformation behavior of electroless Ni-P alloys containing tin and tungsten. Journal of Alloys and Compounds, 436 (1-2). pp. 319-327. ISSN 0925-8388
Barshilia, Harish C and Deepthi, B and Selvakumar, N and Anjana, Jain and Rajam, KS (2007) Nanolayered multilayer coatings of CrN/CrAlN prepared by reactive DC magnetron sputtering. Applied Surface Science , 253. pp. 5076-5083.
Bhaumik, SK (2007) Comments on the report submitted by Rolls-Royce on “Pegasus Mk. 151-32 HPT blade cracking. Project Report. National Aerospace Laboratories, Bangalore, India.
Dutta, Soma (2007) Design, modeling and analysis for optimum actuation in Piezoelectric Micro Cantilever. Project Report. National Aerospace Laboratories, Bangalore, India.
Dutta, Soma and Shubha, V and Ramesh, TG and D'sa, Florita (2007) Pressure effect on the electronic properties of Bi-Sb alloys. In: 10th International Conference on Advanced Materials (IUMRS –ICAM), October 8-13, 2007 , Bangalore, India.
Jain, Anjana and Vijayan, Kalyani (2007) Effect of thermal aging on the crystal structural characteristics of poly(tetra fluoro ethylene). Polymer Engineering and Science, 47 (11). pp. 1724-1729.
Kumar, Ranjith JV and Roopa, HN and Ramachandra Rao, R (2007) Colloidal processing and gel casting of alumina. In: International Conference on Advanced Materials and Composites (ICAMC-2007), 24-26 Oct 2007, Trivandrum, India.
Liermann, HP and Singh, AK and Somayazulu, M and Saxena, SK (2007) Compression behavior of NbC under nonhydrostatic conditions to 57 GPa 13; 13;. International Journal of Refractory Metals and Hard Materials, 25 (5-6). pp. 386-391.
Madan, M and Raghavendra, K and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2007) Failure investigation of HPTR blades of aeroengines. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Analysis of components from the wreckage of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Analysis of deposits from the compressor of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of MDS and FW assembly Nadella pin Pt. No: 2 X 15.8 BRV. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of fixed door assembly of nose landing gear jack of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of steam turbine moving blades. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Venkataswamy, MA and Sujata, M and Banerjee, A and Biswas, A and Bhaumik, SK (2007) Failure analysis of oxygen hose of the lance equipment in LD shop # 2. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Analysis of Al-alloy billets of specification AMS4101 2124 T851. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Analysis of compressor stage I rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of MGB I stage pinions of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of Plunger. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of brace bolt. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of collector gear of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of cyclic-stick of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of fasteners used in pressure safety index valve. Project Report. National Aerospace Laboratories, Bangalore, India.
Madan, M and Venkataswamy, MA and Sujata, M and Biswas, Swati and Ganeshachar, MD and Bhaumik, SK (2007) Failure analysis of fatigue tested LPT rotor blades failed from root region. Project Report. National Aerospace Laboratories, Bangalore, India.
Niraj, N and Govind, - and Saikrishna, CN and Ramaiah, KV and Bhaumik, SK and Nair, KS and Mittal, MC (2007) Vacuum induction melting of NiTi shape memory alloys in graphite crucible. Materials Science and Engineering: A, 465 (1-2). pp. 44-48.
Paligan, AA and Shubha, V and Ramesh, TG (2007) Synthetic high purity mullite ceramic lined steel pipes produced by thermit reactions under the effect of centrifugal force. In: International Conference on Advanced Materials and Composites (ICAMC-2007), 24-26 Oct 2007, Trivandrum, India.
Panda, PK (2007) Ceramic nanofibers by electrospinning technique - A review. Ceramic Society, 66. pp. 65-76.
Panda, PK and Ramakrishna, S (2007) Electrospinning of alumina nanofibers using different precursors. Journal of Materials Science, 42. pp. 2189-2193.
Pathikumar, S and Jayaram, V and Chakshi, AH and Divakar, C (2007) Synthesis of bulk, dense, nano-crystalline yttrium aluminum garnet from co-precipitated powders. Journal of American Ceramic Society, 90 (11). pp. 3638-3641.
Propin, Menendez E and Singh, AK (2007) Ab initio calculations of elastic properties of compressed pt. Physics Review B, 76 (5).
Ramachandra Rao, R (2007) Synthesis and characterisation of nano ceramic materials. In: Proceedings of the Emerging adaptive systems and technologies (EAST-2007), 25-27 Oct 2007, Tamil Nadu, India.
Sahoo, B and Panda, PK (2007) Dielectric, ferroelectric and piezoelectric properties of13; (1 x2013; x)[Pb0.91La0.09(Zr0.60Ti0.40)O3]x2013;x[Pb(Mg1/3Nb2/3)O3],13; 0 xA3; x xA3; 1. Journal of Materials Science, 42:. pp. 4270-4275.
Sahoo, B and Panda, PK (2007) Effect of CeO2 concentration on dielectric, ferroelectric and piezoelectric properties of PMN-PT (67/33) composition. Journal of Materials Science, 42. pp. 4745-4752.
Sahoo, B and Panda, PK (2007) Effect of CeO2 on dielectric, ferroelectric and piezoelectric13; properties of PMNx2013;PT (67/33) compositions. Journal of Materials Science, 42. pp. 4745-4752.
Sahoo, B and Panda, PK (2007) Ferroelectric, dielectric and piezoelectric properties13; of Pb1x2013;xCex(Zr0.60Ti0.40)O3, 0 xA3; x xA3; 0.08. Journal of Materials Science, 42. pp. 9684-9688.
Sellappan, Pathikumar and Jayaram, V and Chokshi, Atul H and Divakar, C (2007) Synthesis of bulk, dense, nanocrystalline yttrium aluminum garnet from amorphous powders. Journal of the American Ceramic Society, 90 (11). pp. 3638-3641.
Singh, AK (2007) Pressure-volume data for epsilon iron and platinum to earth-core pressures and above from one-parameter universal equation of state. Physics of the Earth and Planetary Interiors, 164 (1-2). pp. 75-82.
Singh, AK and Liermann, HP and Akahama, Y and Kawamura, H (2007) Aluminum as a pressure-transmitting medium cum pressure standard for x-ray diffraction experiments to 200 GPa with diamond anvil cells. Journal of Applied Physics, 101 (12). p. 123526.
Srivastava, Meenu and William Grips, VK and Jain, Anjana and Rajam, KS (2007) Influence of SiC particle size on the structure and tribological properties of Ni-Co composites. Surface and Coatings Technology, 202. pp. 310-318. ISSN 0257-8972
Sujata, M and Madan, M and Biswas, Swati and Ganeshachar, MD and Venkataswamy, MA and Bhaumik, SK (2007) Failure analysis of input pinion shafts and intermediate pinion shaft of sugar crushing mills. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2007) Analysis of components and debris from an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2007) Failure analysis of a helicopter main gearbox lube pump. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2007) Failure analysis of compressor stator blades stage II & III of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2007) Failure analysis of gearbox mounting bolt. Project Report. National Aerospace Laboratories, Bangalore, India.
Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Analysis of failed nose wheel assembly of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Analysis of failed spur gear. Project Report. National Aerospace Laboratories, Bangalore, India.
Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Analysis of fatigue tested LPTR blades failure. Project Report. National Aerospace Laboratories, Bangalore, India.
Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Analysis of fractured CBLS lug of a an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Defect investigation of LPT rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Defect investigation of compressor stator blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of 1st and 2nd stage rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.
Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of Bolt-Blade fork (Big) of main rotor assembly of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of components from 55 HP rotary engine. Project Report. National Aerospace Laboratories, Bangalore, India.
Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of flow transmitter (FT) tapping line. Project Report. National Aerospace Laboratories, Bangalore, India.
Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of mixing unit attachment tab (LH) of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of process gas boiler tubes. Project Report. National Aerospace Laboratories, Bangalore, India.
Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of tail pipe of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.
Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of undercarriage door operating lever of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.
Suresh Kumar, M and Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2007) Analysis of failed 35 HP rotor assembly of Wankel engine. Project Report. National Aerospace Laboratories, Bangalore, India.
Suresh Kumar, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2007) Coating failure in compressor rotor blades of an aeroengine. Coating failure in compressor rotor blades of an aeroengine, 14 (5). pp. 913-919.
