Items where Division is "Materials Science Division" and Year is 2022

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: B | J | K | M | N | P | R | S | T | V
Number of items: 17.


Barat, K and Ghosh, A and Doharey, A and Mukherjee, S and Karmakar, A (2022) Crystallographic evaluation of low cycle fatigue crack growth in a polycrystalline Ni based superalloy. International Journal of Plasticity, 149. ISSN 07496419

Borkar, H and Gaikwad, VM and Dutta, Soma and Tomar, M and Gupta, V and Kumar,, A (2022) Lead-free laminated structures for eco-friendly energy harvesters and magnetoelectric sensors. Journal of Physics and Chemistry of Solids, 160. ISSN 00223697


Jalaja, M A and Dutta, S (2022) Complex Impedance Spectroscopy studies to unravel electrical properties and processes in Al+3-modified PLZT. Journal of Materials Science: Materials in Electronics, 33 (36). pp. 26943-26953. ISSN 09574522


Kadgaye, C and Godase, S and Karani, A and Barat, K and Chakrabarti, D and Karmakar, A (2022) Correlating in-plane strength anisotropy with its microstructural counterpart for a hot rolled line pipe steel. International Journal of Pressure Vessels and Piping, 199. ISSN 03080161

Krishnan, G S and Thomas, P and Naveen, S (2022) The influences of polymerization conditions on thermal and structural properties of carbon fiber precursor polymers. Chemical Papers, 76 (3). pp. 1607-1620. ISSN 03666352


Mala, S and Latha, HKE and UdayaKumar, A and Lalithamba, H.S., HS (2022) Green synthesis of ITO nanoparticles using Carica papaya seed extract: impact of annealing temperature on microstructural and electrical properties of ITO thin films for sensor applications. Materials Technology, 37 (10). ISSN 10667857

Mathew, R T and Singam, S and Ghosh, P and Masa, S K and Prasad, M J N V (2022) The defining role of initial microstructure and processing temperature on microstructural evolution, hardness and tensile response of Al-Mg-Sc-Zr (AA5024) alloy processed by high pressure torsion. Journal of Alloys and Compounds, 901. ISSN 09258388


Nagaraja, A M and Gururaja, S and UdayaKumar, A (2022) Tensile behavior of ceramic matrix minicomposites with engineered interphases fabricated by chemical vapor infiltration. Journal of the European Ceramic Society, 42 (6). pp. 2659-2671. ISSN 09552219


Panda, PK and Naragund, VS (2022) Electrospun nanofiber-based respiratory face masks—a review. Emergent Materials, 5 (2). pp. 261-278. ISSN 25225731

Panda, PK and Sahoo, B and Thejas, T S and Krishna, M (2022) High d 33 Lead-Free Piezoceramics: A Review. Journal of Electronic Materials, 51 (3). pp. 938-952. ISSN 03615235


Raghavendra, K and Madan, M and Venkatesh, V and Sujata, M and Bhaumik, S K (2022) Failure Analysis of a Welded AISI321 Steel Bleed Air Connector of an Aircraft Engine. Journal of Failure Analysis and Prevention, 22 (4). pp. 1776-1786. ISSN 15477029

Rangaraj, L and Kashimatt, V and Pooja, P and Suresha, B (2022) Reaction, densification, and mechanical properties of Ti2AlCx ceramics at low applied pressure and temperature. International Journal of Applied Ceramic Technology, 19 (5). pp. 2807-2816. ISSN 1546542X


Sahoo, B and Panda, P K and Ramakrishna, S (2022) Electrospinning of functional ceramic nanofibers. Open Ceramics, 11. pp. 1-16. ISSN 26665395

Santhana Krishnan, G and Naveen, S and Shahnawaz, M and Ramcharan, T (2022) Pyrolysis and thermal degradation studies of silane-carbosilane transformation using hyphenated thermal analysis. Journal of Analytical and Applied Pyrolysis, 164. ISSN 01652370

Sowmya, B and Panda, P K (2022) Electrospinning of poly(ε-caprolactone) (PCL) and poly ethylene glycol (PEG) composite nanofiber membranes using methyl ethyl ketone (MEK) and N N’-dimethyl acetamide (DMAc) solvent mixture for anti-adhesion applications. Materials Today Communications, 33. ISSN 23524928


Tiwari, S and Kumar, R and Dangi, A and Antony Jeyaseelan, A and Dutta, Soma and Pratap, R (2022) Low cost, contamination-free, and damage-free fabrication of PZT MEMS on SOI substrate. Journal of Micromechanics and Microengineering, 32 (2). pp. 1-10. ISSN 09601317


Veeraiah, G and Ramanaiah, N and Sudhakar, I and Venkateswarlu, K (2022) Influence of AC-TIG weld current on dissimilar AA5083 and AA 7075 aluminium alloy. Advances in Materials and Processing Technologies, 8 (4). pp. 4095-4105. ISSN 2374068X

This list was generated on Wed Jun 7 14:41:38 2023 IST.