Items where Division is "Materials Science Division" and Year is 2013

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | D | J | K | M | P | R | S | U | V
Number of items: 20.


Anjana, Jain and Jayanth Kumar, S and Mahapatra, D Roy and Rathod, VT (2013) Development of P(VDF-Trfe) Films and Its Quasi-Static and Dynamic Strain Response. International Journal of Engineering Research and Technology, 2 (12). pp. 2598-2605. ISSN 2278-0181

Aruna, ST and Balaji, N and Paligan, AA (2013) Comparative Study On The Synthesis And Properties Of Yttria Stabilized Zirconia (YSZ) And Lanthana Doped YSZ Plasma Sprayed Thermal barrier coatings. In: Proceedings of the ASME 2013 Gas Turbine India Conference (GTINDIA2013), 5-6 Dec 2013, Bangalore, Karnataka, India.


Bhagyaraj, J and Ramaiah, KV and Saikrishna, CN and Bhaumik, SK and Gouthama, - (2013) Behaviour and effect of Ti2Ni phase during processing of NiTi shape memory alloy wire from cast ingot. Journal of Alloys and Compounds, 581 (Decemb). ISSN 0925-8388


Dutta, Soma and Shubha, V and Ramesh, TG (2013) Reduction in thermal conductivity of Bi-Te alloys through grain refinement method. Bulletin of Materials Science, 36 (5). pp. 853-857. ISSN 0250-4707


Jain, Anjana and Siva Subba Rao, P and Jayanth Kumar, S (2013) PVDF-PZT Composite Films for Strain Sensing Applications. In: ISSS National Conference on MEMS, Smart Materials, Structures and Systems, 06-07 Sept 2013, Pune, India.

Jigajinni, SM and Venkateswarlu, K and Kori, SA (2013) Effect of a Grain Refiner Cum Modifier on Mechanical Properties of Al-7Si and Al-11Si Alloys. Metals and Materials International, 19 (2). pp. 171-181.


Krishna, NN and Tejas, R and Sivaprasad, K and Venkateswarlu, K (2013) Study on cryorolled Al–Cu alloy using X-ray diffraction line profile analysis and evaluation of strengthening mechanisms. Materials and Design, 52. pp. 785-790. ISSN 0261-3069


Manohar , HR and Chandrashekharaiah, TM and Venkateswarlu, K and Kori, SA (2013) Sliding wear performance of reinforced A413 alloy at elevated temperatures. International Journal of Advanced Manufacturing Technology, 65. pp. 395-402. ISSN 1068-1086

Markose, S and Patange, SSR and Raja, S and Anjana, Jain and Elias, Bindu (2013) Experimental Study on Dimension Effect of PVDF Film on Energy Harvesting. International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, 2 (1). pp. 270-278. ISSN 2278 - 8875


Patil, V and Anjana, Jain (2013) Design of Stretching Unit for Continuous Β-Phase PVDF Film and Analysis of Piezoelectric Film Sensor for Transducer Applications. International Journal of Engineering Research and Technology, 2 (12). pp. 3008-3011. ISSN 2278-0181


Rathod, VT and Mahapatra, D Roy and Anatony, Jeyaseelan and Soma , Dutta (2013) Large-area Piezoceramic Coating with IDT Electrodes for Ultrasonic Sensing Applications. In: SPIE Proceeding , Smart Structures /NDE, San Diego.


Saikrishna, CN and Ramaiah, KV and Bhagyaraj, J and Gouthama, - and Bhaumik, SK (2013) Influence of stored elastic strain energy on fatigue behaviour of NiTi shape memory alloy thermal actuator wire. Materials Science and Engineering A, 587. pp. 65-71. ISSN 0921-5093

Saikrishna, CN and Ramaiah, KV and Vidyashankar, B and Bhaumik, SK (2013) Effect of intermittent overload cycles on thermomechanical fatigue life of NiTi shape memory alloy wire. Metallurgical and Materials Transactions A, 44A. C5-8. ISSN 1073-5623

Selvakumar, N and Mohamed, MJS and Narayanasamy, R and Venkateswarlu, K (2013) Forming limit diagram and void coalescence analysis of AA5052 coated with molybdenum-based ceramic nanocomposites. Materials and Design, 52. pp. 393-403. ISSN 0261-3069

Shireesha , G and Manjunatha, C and Jain, Anjana and Radhakrishna, MC (2013) Preparation and characterization of Poly(vinylidenefluoride)-CdSiO3 nanocomposite thin films. In: Workshop on Advanced materials manufacturing management and thermal studies, 3 May 2013, Tumkur.

Sujata, M and Bikas C, Maji and Madangopal, Krishnan and Gouthama, - and Ranjit K, Ray (2013) Effect of Co Addition on the Microstructure, Martensitic Transformation and Shape Memory Behavior of Fe-Mn-Si Alloys. The Minerals, Metals & Materials Society and ASM International, 44A (172).

Sujata, M and Jagannathan, N and Raghavendra, K and Manjunatha, CM and Bhaumik, SK (2013) Fatigue Fracture of a Compressor Disc of an Aeroengine. Journal of Failure Analysis and Prevention. pp. 1-8.

Sujata, M and Madan, M and Raghavendra, K and Bhaumik, SK (2013) Fretting fatigue in aircraft components made of Ti-A1-V alloys. Procedia Engineering, 55. pp. 481-486. ISSN 1877-7058


UdayaKumar, A and Stalin, M and Venkateswarlu, K (2013) Effect of CVD SiC seal coating on the mechanical properties of Cf /SiC composites generated through CVI. Surface and Coatings Technology. pp. 1-26. ISSN 0257-8972


Vanarotti, M and Venkateswarlu, K and Kori, SA and Sridhar, BR and Padasalgi, SB (2013) Effect of Ni coating on SiC particles to synthesize Al based Metal Matrix Composites. International Journal of Science Research, 01 (4). pp. 405-409. ISSN 2319-7064

This list was generated on Wed Jun 7 16:01:01 2023 IST.