 | Up a level |
Banker, Manisha M and Varughese, Byji Analytical Prediction of Failure Strength of Co-cured Composite Skin-Stiffener Joints. In: 55th AIAA/ASME/ASCE/AHS/SC Structures, Structural Dynamics and Materials Conference 2014. American Institute for Aeronautics and Astronautics ( AIAA ), Proceedings of a meeting held 13-17 January 2014, National Harbor, Maryland, USA. Held at the AIAA SciTech Forum 2014. ISBN 978-1-63266-929-2
Dayananda, GN and Kumar, Senthil P and Rao, Subba M Development of SMA Based Actuator Mechanisms for Deployment of Control Surfaces. In: International Conference on Smart Materials Structures and Systems, 28-30 July 2005, Bangalore.
Jayasankar, S and Dayananda, GN and Varughese, Byji and Kumar, Senthil P SMA Based Adaptive Concept on Wings of Large Civil Aircraft. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD-2009) December 10-12, 2009, Bangalore, India, 10-12 Dec 2009, Bangalore, India.
Kamath, GM and Kumar, Senthil P and Shivaprasad, MV Vibration Control Studies Using an Impedance Method. In: International Conference on Smart Materials Structures and Systems December 12-14, 2002, Indian Institute of Science, Bangalore, India, 12-14 Dec 2002, Bangalore, India.
Radhakrishnan, G and Dinesh, BL and Srinivasa rao, A and Kotresh, Gaddikeri M and Sudheendra, HN and Subba Rao, M Master process sheets for fabrication of CFC centre fuselage parts of TEJAS (Light Combat Aircraft): part-2. Technical Report. NAL.
Sateesh, VL and Jayasankar, S and Kumar, Senthil P and Raju. S, Gangadhar and Satisha, - and Dayananda, GN FE Simulation of Control Surfaces with SMA Actuators for Small Size Aircrafts. In: Fourth ISSS National Conference on Microsystems, Smart Materials, Structures, ISSS-2010, 30 Sep - 01 Oct 2010, Nagpur.
Shankar, V and Dayananda, GN and Kumar, Senthil P and Rao, Subba M and Balasubramanian, R Development of Electronic actuation system for Shape Memory Alloy. In: International Conference on Smart Materials Structures and Systems December 12-14, 2002, Indian Institute of Science, Bangalore, India, 12-14 Dec 2002, Bangalore, India.
Stanley , C Salem and Gowda, MNN and Ramachandra, HV and Kamath, GM Development of Carbon Fibre Metal Laminates (CFML): Design, Fabrication and Characterisation. Technical Report. NAL Press, NAL.
Stanley , C Salem and Gowda, MNN and Ramachandra, HV and Kamath, GM and Subba Rao, M Development of CGLARE: Design, Fabrication and Characterisation. In: INCOMM 6, 12-14 December,2007, IIT Kanpur.
Stanley , C Salem and Kotresh, Gaddikeri M and Gowda, MNN and Ramesh, Sundaram and Dhayanidhi , J and Nagarajappa, B and Sathiya Naarayan, S and Satish, Chandra and Anuradha , Nayak and Vijay , Petley and Ramachandra, S Design and Testing of Wing Leading Edge of a Light Transport Aircraft. In: NASAS 2011, Sep 22-24,2011, IIT Kanpur.
Stanley , C Salem and Kotresh, Gaddikeri M and Gowda, MNN and Ramesh, Sundaram and Dhayanidhi , J and Nagarajappa, B and Sathiya Naarayan, S and Satish, Chandra and Anuradha , Nayak and Vijay , Petley and Ramachandra, S Design and Testing of Wing Leading Edge of a Light Transport Aircraft. In: NASAS 2011, Sep 22-24,2011, IIT Kanpur.
Stanley , C Salem and Kowshik , BS and Gowda, MNN and Kotresh, Gaddikeri M and Ramesh, Sundaram and Devaiah, MC and Ramachandra, HV Evaluation of Fastener Pull Through Resistance of Aluminum. Technical Report. NAL Press.
Stanley , C Salem and Sandeep Kumar, V and Sugun, BS and Ramesh, Sundaram and Ramachandra, HV and Devaiah , MC and Srinivasa, V and Ramesh Kumar, M Experimental Characterisation of GLass Aluminum REinforced (GLARE™) laminates. Technical Report. NAL Press.
Stanley , C Salem and Sugun, BS and Gowda, MNN and Kamath, GM Low Velocity Impact Studies on Carbon Fiber Metal Laminates. Technical Report. NAL press, NAL.
Stanley , C Salem and Sugun, BS and Sandeep Kumar, V and Viswamurthy , SR and Ramesh, Sundaram Low Velocity Impact Characterisation of Carbon/Epoxy Laminates processed through Resin Infusion Technique. Technical Report. NAL Press.
Upadhya, AR and Dayananda, GN and Kamalakannan, GM and Ramaswamy, Setty J and Daniel, J Christopher Autoclaves for Aerospace Applications: Issues and Challenges. International Journal of Aerospace Engineering.
