Items where Division is "Advanced Composites Division" and Year is 2009

B

Babu Rao, D and Baskey, D and Rawat, RS (2009) Water Jet Cutter: An Efficient Tool for Composite Product Development. In: National Conference on Scientific Achievements of SC & ST Scientits & technologists, 14-16 April 2009, Bangalore.

Balamurugan, R and Biswanath, Mondal and Sukamal, Ghosh (2009) Optimisation of machining parameters for hard machining: grey relational theory approach and ANOVA. International Journal of Advanced Manufacturing Technology, 45 (11-12). pp. 1068-1086. ISSN 1068-1086

D

Dayananda, GN and Kamalakannan, GM and Senthil Kumar, P and Jayasankar, S and Satisha, - (2009) A smart material based approach to morphing. In: MAV Workshop- Challenges and Presferred Outcomes, 13 November 2008, National Aerospace Laboratories.

Dayananda, GN and Senthil Kumar, P and Ramachandra , HV and Jayasankar, S and Satisha, - (2009) Inve~tigation~oThf ermo-Mechanical Characteristics of Thin Shape Memory Alloy (Ni-Ti) Wires. Project Report. National Aerospace Laboratories, Bangalore.

G

Govindan, Kutty M and Saravana, Kumar N and Lohith, N and Sudheendra, HN and Subbarao, M (2009) Master process sheets for fabrication of CFC centre fuselage parts for TEJAS (Light Combat Aircraft). Technical Report. NAL.

Govindan, Kutty M and Saravana, Kumar N and Naik, BN and Saji, D and Sudheendra, HN and Subbarao, M (2009) Master process sheets for fabrication of CFC centre Fuselage parts for TEJAS (Light Combat Aircraft) - part-5. Technical Report. NAL.

Govindan, Kutty M and Saravana, Kumar N and Ramesh, Sundaram and Sudheendra, HN and Subbarao, M (2009) Master process sheets for fabrication of CFC centre fuselage parts for TEJAS (Light Combat Aircraft) - part-4. Technical Report. NAL.

Gupta, Nitesh and Ramesh, Sundaram (2009) Fiber Optic Sensors for Monitoring Flow in Vacuum Enhanced Resin Infusion Technology VERITy Process. Composites Part A: applied Science and Manufacturing, 40. pp. 1065-1070. ISSN 1359-835X

K

Kamalakannan, GM and Gupta, Amit Kumar (2009) An improved technique and its implementation for control of high power heaters in large autoclaves and similar plants. In: International Conference of Instrumentation, ICI-2009, 2009, Pune, India.

M

Manisha, Banker M and Kotresh, Gaddikeri M and Byji, Varughese (2009) Global finite element analysis of SARAS composite wing for fuel pressure. Technical Report. NAL.

Manisha, Banker M and Kotresh, Gaddikeri M and Byji , Varughese and Subharao, M (2009) Finite Element Analysis of SARAS Wing Test Box Addressing Manufacturing Deviations. Technical Report. NAL, Bangalore.

Moorthy, Emayavaramba MV and Saji, D and Ravi, Kumar P (2009) Quality assurance (QA) document for composite components of Tejas-Light Combat Aircraft (LCA). Technical Report. NAL.

N

Nitesh, Gupta and Ramesh, Sundaram (2009) Fiber optic sensors for monitoring flow in vacuum enhanced resin infusion technology (VERITy) process. Composites Part A: applied Science and Manufacturing, 40 (8). pp. 1065-1070. ISSN 1359-835X

P

Pitchai, P and Gowda, MNN and Subba Rao, M (2009) Assembly process sheets for composite co-cured FIN of Tejas-Light Combat Aircraft (LCA). Technical Report. NAL.

Polagangu , James and Murali Krishna, D and Gaddikeri, KM and Byji, Varughese (2009) Finite Element Analysis of Inter Spar Ribs of Composite Wing of Light Transport Aircraft against Brazier Load. In: National Conference Scientific Achievements of SC & ST Scientists & Technologists, 14-16 April 2009, Bangalore.

R

Ramanaiah, B and Ramachandra, HV and Sanjeev Kumar, S and Kotresh, Gaddikeri M and Byji, Varughese and Ramesh, Sundaram and Kamath, GM and Subba Rao, M (2009) Challenges in Static Testing of Co-Cured Co-Bonded Composite Aircraft Structures. In: Natonal Conference on Scientific Achievements of SC & ST Scientisits and Technologists, 14-16 April 2009, Bangalore.

Ramaswamy, Setty J and Christopher, Daniel and Venkatesh, S and Byji, Varughese and Dayananda, GN (2009) Assembly process sheets for composite co-cured FIN of Tejas-light combat aircraft (LCA). Technical Report. NAL.

Ramaswamy, Setty J and Dayananda, GN (2009) Design aspects of nitrogen reservoirs. Technical Report. NAL.

Ramaswamy, Setty J and Venkatesh, S and Dayananda, GN and Daniel, J Christopher and Varughese, Byji (2009) Mechanical Design Aspects of 4.9 m Dia., 13 m Length Computer Controlled Autoclave. Project Report. National Aerospace Laboratories.

Ramesh, Sundaram et. al. (2009) Workshop on repair technology for composite structures- lecture notes-Vol.1 (Theory). Technical Report. NAL.

Ravi, Kumar P and Sathish, Nimbal S and Sudheendra, HN and Subbarao, M (2009) Master process sheets for fabrication of CFC centre fuselage parts of TEJAS (Light Combat Aircraft): part-3. Technical Report. NAL.

S

Shuresh Chand, Jangir and Srinivasa, V and Ramachandra, HV and Ramesh Kumar, M and Sudheendra, HN (2009) Qualification of composite components of tejas (LCA): non-destructive evaluation. Technical Report. NAL.

Siddeshwar, (2009) Workshop on repair technology for composite structures Vol.II (Practicals). Technical Report. NAL.

Srinivasa, V and Sanjeev Kumar, S and Ramesh Kumar, M and Sudheendra, HN and Madhava, MR (2009) Non-Destructive Evaluation—A Pivotal Technology for Qualification of Composite Aircraft Structures. In: National Conference on Scientific Achievements of SC & ST Scientific & Technologists, 14-16 April 2009, Bangalore.

T

Thulasi Durai, D and Venkatesh, S and Byji, Varughese and Ramanaiah, B and Dayananda, GN (2009) Concepts for truss based aerofoil constructions. Technical Report. NAL.

Thulasi Durai, D and Viswamurthy , SR and Byji, Varughese and Dayananda, GN and Subrahmanya, MB and Kulkarni, DS and Rajani, BN and Mathur, JS (2009) Optimized construction of a composite MAV wing using CFD analysis. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2009), 10-12 December 2009, Bangalore.

V

Venkataswamy, MA and Raghavendra, K and Suresh Kumar, M and Ramachandra, HV (2009) Fractographic Analysis of Unidirectional Carbon Fiber Reinforced Plastic (CFRP) Composite Laminates Failed under Compression Loads. In: National Conference on Scientific Achievements of SC ST Scientists and Technologists, 14-16 April 2009, Bangalore.