Items where Author is "Jana, S"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Item Type | No Grouping
Number of items: 28.

Article

Kulkarni, S and Jana, S (2020) Influence of geometric parameters on the bump foil bearing performance. Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology, 234 (7). pp. 1017-1026. ISSN 13506501

Bekinal, SI and Jana, S (2016) Generalized three-dimensional mathematical models for force and stiffness in axially, radially, and perpendicularly magnetized passive magnetic bearings with "n" number of ring pairs. Journal of Tribology, 138 (3). ISSN 07424787

Bekinal, SI and Rao, Anil and Kulkarni, SS and Jana, S (2015) Hybrid permanent magnet and foil bearing system for complete passive levitation of rotor. Mechanisms and Machine Science, 23. ISSN 22110984

Bekinal, SI and Anil, TR and Jana, S (2013) Analysis of radial magnetized permanent magnet bearing characteristics. Progress in Electromagnetic Research B, 47. pp. 87-105. ISSN 1937-6472

Radhakrishna, M and Jana, S and Arunkumar, V and Sreedhar, BK (2013) Development of Active Magnetic Bearings for a Vertical Centrifugal Pump Rotor. Advances in Vibration Engineering, 12 (4). pp. 329-335.

Bekinal, SI and Anil, TR and Jana, S and Peerzade, MI (2012) Optimization of Halbach Magnetized Permanent Magnet Axial Bearing. International Journal of Engineering and Innovative Technology, 2 (1). pp. 195-199. ISSN 2277-3754

Bekinal, SI and Anil, TR and Jana, S (2012) Analysis of Axially Magnetized Permanent Magnet Bearing Characteristics. Progress In Electromagnetics Research B, 44. pp. 327-343. ISSN 1937-6472

Jana, S and Arunkumar, V (2005) 5-Axes Levitation of a Rotor by Active Magnetic Bearings Employing Direct Output Feedback Control. Journal of Aerospace Sciences and Technologies. (Submitted)

Monograph

Balaji, Sankar and Thennavarajan, S and Vijayendranath, V and Brijeshkumar , Shah and Khan, AA and Jana, S and Ramamurthy, S (2013) Aero-Thermodynamic modeling and gas path simulation for a twin spool turbo jet engine. Project Report. National Aerospace Laboratories, Bangalore.

Thennavarajan, S and Brijeshkumar , Shah and Jana, S and Upendranath, V and Ramamurthy , S and Ashfaque Ahmad , Khan and Dileepkumar B , Alone and Satpathy , RK and Sahoo, B and SatishYadav, K and Sunil Kumar , Dwari and Mandal, D (2012) Design, Fabrication and Testing of Pressure Adaptors and Temperature Sensors for an Aero Engine Health Monitoring. Project Report. NAL, BANGALORE.

Kulkarni, SS and Manikandan, LP and Radhakrishna, M and Munirathnam, V and Ananda, M and Jana, S and Varadarajan, MN and Arunkumar, V (2009) Evaluation of tapered rolling element bearings for probable application in LCA naval version. Technical Report. National Aerospace Laboratories, Bangalore.

Radhakrishna, M and Ananda, M and Munirathnam, V and Sarangi, A and Jana, S and Arunkumar, V (2009) Bump Foil Bearings – Feasibility Study to Achieve Rotor Speed in Excess of 50,000 rpm for Low Load Applications. Project Report. NAL, NAL Bangalore.

Jana, S and Radhakrishna, M and Ananda, M and Munirathnam, V and Kulkarni, SS and Manikandan, LP and Arunkumar, V (2009) Active magnetic bearings for the vertical sodium pump (50 m3/h capacity) - Test rig design. Technical Report. National Aerospace Laboratories, Bangalore.

Conference or Workshop Item

Kumar, SS and Chotalia, RJ and Jana, S and Ganguli, Ranjan and Kandagal, SB (2019) Single stage axial compressor stability management with self-recirculating casing treatment. In: AIAA Scitech 2019 Forum, 7-11 January 2019, San Diego, California.

Kumar, SS and Kandagal, SB and Ganguli, Ranjan and Jana, S (2017) Structural dynamic behavior of axial compressor rotor. In: ASME 2017 Gas Turbine India Conference, GTINDIA 2017, 7 - 8 December 2017, Bangalore, India.

Kumar, SS and Ganguli, Ranjan and Kandagal, SB and Jana, S (2015) Flow behavior in a transonic axial compressor stage. In: GTINDIA2015, December 2-3, 2015, Hyderabad, India.

Lees, AW and Jana, S and Inman, DJ and Cartmell, MP (2007) Control of bearing stiffness using shape memory. In: IMAC XXV, 19-22 Feb 2007, Oriando, Florida, USA.

Nagendra, KS and Jana, S and Arunkumar, V (2006) Vibration Reduction of Flexible Beams using Shape Memory Alloys. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, DIAT, Pune. (Submitted)

Shivaprasad, GK and Radhakrishna, M and Jana, S and Arunkumar, V (2006) Nut factor studies in bolted joints. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, 12-14 Dec 2006, Pune, India.

Nagendra, KS and Jana, S and Arunkumar, V (2006) Vibration reduction of flexible beams using shape memory alloys. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, 12-14 Dec 2006, Pune, India.

Shivaprasad, GK and Radhakrishna, M and Jana, S and Arunkumar, V (2006) Nut Factor Studies in Bolted Joints. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, DIAT,Pune. (Submitted)

Jana, S and Arunkumar, V (2005) Studies on the Effect of Shaft Bow for a Multi Mass Flexible Rotor Model. In: Proceedings of the National Conference on Industrial Problems on Machines and Mechanisms, IIT Kharagpur. (Submitted)

Jana, S and Arunkumar, V and Ananda, M (2004) 5-Axes Levitation of a Rotor Towards Indigenisation of the Magnetic Bearing Technology. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, 05-07 November 2004, IIT Kanpur. (Submitted)

Nagendra, KS and Arunkumar, V and Jana, S and Mahesh, Mesta (2004) Application of Layer Damping Technique – An Experimental Study. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, IIT Kanpur. (Submitted)

Arunkumar, V and Shashidhar, UG and Jana, S and Munirathnam, V and Mahesh, Mesta (2004) Feasibility Studies on Power Take Off Composite Shaft. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, IIT Kanpur. (Submitted)

Lakshminarasimha, R and Arunkumar, V and Jana, S and Bhaumik, SK and Ramaiah, KV (2004) Preliminary Studies on the Thermo-Mechanical Characteristics of Indigenously developed Shape Memory Alloy wires. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, IIT Kanpur. (Submitted)

Arunkumar, V and Rajaneesh, MK and Radhakrishna, M and Jana, S (2004) Bolted Joint Stiffness Studies – An Experimental Approach. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, IIT Kanpur. (Submitted)

Jana, S and Arunkumar, V (2003) Experimental Studies Related to the use of High Temperature Elastomers as External Damper for Rotating Systems. In: Proceedings of National Symposium on Rotor Dynamics, IIT Guwahati, India. (Submitted)

This list was generated on Fri Oct 7 10:39:29 2022 IST.