 | Up a level |
Radhakrishna, M and Jana, S and Arunkumar, V and Sreedhar, BK (2013) Development of Active Magnetic Bearings for a Vertical Centrifugal Pump Rotor. Advances in Vibration Engineering, 12 (4). pp. 329-335.
Kulkarni, SS and Manikandan, LP and Radhakrishna, M and Munirathnam, V and Ananda, M and Jana, S and Varadarajan, MN and Arunkumar, V (2009) Evaluation of tapered rolling element bearings for probable application in LCA naval version. Technical Report. National Aerospace Laboratories, Bangalore.
Radhakrishna, M and Ananda, M and Munirathnam, V and Sarangi, A and Jana, S and Arunkumar, V (2009) Bump Foil Bearings – Feasibility Study to Achieve Rotor Speed in Excess of 50,000 rpm for Low Load Applications. Project Report. NAL, NAL Bangalore.
Jana, S and Radhakrishna, M and Ananda, M and Munirathnam, V and Kulkarni, SS and Manikandan, LP and Arunkumar, V (2009) Active magnetic bearings for the vertical sodium pump (50 m3/h capacity) - Test rig design. Technical Report. National Aerospace Laboratories, Bangalore.
Nagendra, KS and Jana, S and Arunkumar, V (2006) Vibration Reduction of Flexible Beams using Shape Memory Alloys. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, DIAT, Pune. (Submitted)
Shivaprasad, GK and Radhakrishna, M and Jana, S and Arunkumar, V (2006) Nut factor studies in bolted joints. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, 12-14 Dec 2006, Pune, India.
Nagendra, KS and Jana, S and Arunkumar, V (2006) Vibration reduction of flexible beams using shape memory alloys. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, 12-14 Dec 2006, Pune, India.
Shivaprasad, GK and Radhakrishna, M and Jana, S and Arunkumar, V (2006) Nut Factor Studies in Bolted Joints. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, DIAT,Pune. (Submitted)
Jana, S and Arunkumar, V (2005) 5-Axes Levitation of a Rotor by Active Magnetic Bearings Employing Direct Output Feedback Control. Journal of Aerospace Sciences and Technologies. (Submitted)
Jana, S and Arunkumar, V (2005) Studies on the Effect of Shaft Bow for a Multi Mass Flexible Rotor Model. In: Proceedings of the National Conference on Industrial Problems on Machines and Mechanisms, IIT Kharagpur. (Submitted)
Jana, S and Arunkumar, V and Ananda, M (2004) 5-Axes Levitation of a Rotor Towards Indigenisation of the Magnetic Bearing Technology. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, 05-07 November 2004, IIT Kanpur. (Submitted)
Nagendra, KS and Arunkumar, V and Jana, S and Mahesh, Mesta (2004) Application of Layer Damping Technique – An Experimental Study. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, IIT Kanpur. (Submitted)
Arunkumar, V and Shashidhar, UG and Jana, S and Munirathnam, V and Mahesh, Mesta (2004) Feasibility Studies on Power Take Off Composite Shaft. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, IIT Kanpur. (Submitted)
Lakshminarasimha, R and Arunkumar, V and Jana, S and Bhaumik, SK and Ramaiah, KV (2004) Preliminary Studies on the Thermo-Mechanical Characteristics of Indigenously developed Shape Memory Alloy wires. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, IIT Kanpur. (Submitted)
Arunkumar, V and Rajaneesh, MK and Radhakrishna, M and Jana, S (2004) Bolted Joint Stiffness Studies – An Experimental Approach. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, IIT Kanpur. (Submitted)
Jana, S and Arunkumar, V (2003) Experimental Studies Related to the use of High Temperature Elastomers as External Damper for Rotating Systems. In: Proceedings of National Symposium on Rotor Dynamics, IIT Guwahati, India. (Submitted)
Arunkumar, V and Swamy, RP (2000) Contoured land Squeeze film dampers- A probable candidate for obtaining better characteristics in gas turbine engines. In: NCABE – 2000, Hyderabad. (Submitted)
Balasubramanian, TS and Arunkumar, V and Jayaraman, M (1996) Anti Resonance concept applied to rotors. Journal of the Aeronautical Society of India, 48 (2). pp. 158-160.
Rajagopal, P and Raja, S and Antony, Michael and Arunkumar, V (1995) Analytical and Experimental studies on cantilever type squeeze film Dampers. In: Fourth India MSC user’s conference. (Submitted)
Arunkumar, V and Kumar, RH (1991) Axial squeeze film systems - Parametric study and their relative contributions as bearings and dampers. In: 10th International Symposium on Air Breathing Engines (ISABE), 1-6 Sep 1991, Nottingham, UK.
Arunkumar, V (1989) On structural modelling of rotor configurations. In: 9th International Symposium on Air Breathing Engines, 03-08 Sep 1989, Athens, Greece.
Arunkumar, V and Kaushal, SC (1987) Experimental Study on the behavior of damper bearing plane stiffness in squeeze film mounted rotor systems. International journal of Turbo and Jet Engines, 4. ISSN 03340082 (Submitted)
Arunkumar, V and Kaushal, SC (1985) An experimental study on the behaviour of damper bearing plane stiffness in squeze film mounted rotor systems. In: 7th conference of International Symposium on Air Breathing Engines, 2-6 Sep 1985, Beijing, China.
Arunkumar, V and Rajagopal, P (1985) Computer program for prediction of DMPED critical speeds of rotor systems. Technical Report. National Aeronautical Laboratory, Bangalore, India.
Arunkumar, V and Kaushal, SC and Lakshmikantan, K (1985) Experimental analysis of damper behavior of squeeze film dampers for gas turbine engines. Journal of Engineering for Gas Turbine and Power, 107 (1). pp. 165-170. ISSN 0742-4795
Arunkumar, V and Paranjpe, PA (1979) Experimental evaluation of damping coeficient of a squeeze film mounted ball bearing AIAA-79-7013. In: 4th International symposium on Air breathing engines.
Ramamurthy, S and Arunkumar, V and Prabhu, BS Application of Aerodynamic foil bearing in high speed spindles of textile machinery –case study. In: International Conference on Tribology AUSTRIB 1994, Australia.
