Items where Year is 2013

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators Name | Item Type | No Grouping
Jump to: A | B | C | D | E | G | H | I | J | K | L | M | N | P | R | S | U | V | Y
Number of items: 240.

A

Abhay, GK and Jayakumar, JS and Giridhar, Babu Y and Felix, J (2013) CFD Simulation of Open-cell Aluminum Metal Foams for Pressure Drop Characterization. In: ASME 2013 Gas Turbine India Conference,GTINDIA2013, 5-6 Dec 2013, CSIR-NAL, Bangalore.

Ali, Mohd Y and Alvi, Farukh and Kumar, Rajan and Manisankar, C and Verma, SB and Venkatakrishnan, L (2013) Studies on the influence of steady microactuators on shock-wave/boundary layer interaction. AIAA Journal, 51 (12). pp. 2753-2762. ISSN 0001-1452

Amit, Khatri and Jatinder, Singh and Nandan, Sinha (2013) Aircraft Design Using Constrained Bifurcation and Continuation Method. In: AIAA Atmospheric Flight Mechanics (AFM) Conference, August 19-22, 2013, Boston, Massachusetts.

Ananda, CM and Nair, Sabitha and Mainak, GH (2013) ARINC 653 API and its application – An insight into Avionics System Case Study. Defence Science Journal, 63 (2). pp. 223-229. ISSN 0011-748X

Ananda, CM and Pankaj, AC and Pavan, Kumar (2013) Design and Development of Integrated Micro Autopilot module with 10 state Sensor Suite and Data Logger for Micro Air Vehicle. In: International conference on Intelligent Unmanned Systems, 2013-09-25, Jaipur, Rajasthan.

Anandaraj, D and Sivaramakrishnan, Rajalakshmy and kumar, Karun G (2013) Design and development of customized communication protocol for the serial link interface from PCI-E add-on card. ICTACT JOURNAL ON COMMUNICATION TECHNOLOGY, 4 (4). ISSN 2229-6948

Anjana, Jain and Jayanth Kumar, S and Mahapatra, D Roy and Rathod, VT (2013) Development of P(VDF-Trfe) Films and Its Quasi-Static and Dynamic Strain Response. International Journal of Engineering Research and Technology, 2 (12). pp. 2598-2605. ISSN 2278-0181

Arshad Shameem , C and Venkatesh, TN (2013) Prediction of near-surface wind fields using the CSIR Varsha GCM. In: Asia-Pacific Conference on Wind Engineering, 2013-12-10, CSIR-SERC, Chennai.

Aruna, ST (2013) Effect of different precursors, and method of fabrication on the properties of zinc stearate/oxide hierarchical superhydrophobic surfaces. In: National symposium on electrochemical science and technology, NSEST-2013, 16 Aug 2013, IISc, Bangalore.

Aruna, ST (2013) Solution combustion synthesis: From powders to coatings. In: Commemoration of 25 years of Solution combustion synthesis, 12 Jul 2013, IPC department, IISc, Bangalore.

Aruna, ST (2013) Solution combustion synthesis: From powders to coatings. In: Commemoration of 25 years of Solution combustion synthesis, 2013-07-12, IPC department, IISc,Bangalore.

Aruna, ST (2013) Synthesis and properties of sol-gel based corrosion resistant nanocomposite coating. In: National Conference on Scope of Advanced Materials in Energy & Environment, 7 Aug 2013, CMR Institute of Technology, Bangalore.

Aruna, ST and Balaji, N and Paligan, AA (2013) Comparative Study On The Synthesis And Properties Of Yttria Stabilized Zirconia (YSZ) And Lanthana Doped YSZ Plasma Sprayed Thermal barrier coatings. In: Proceedings of the ASME 2013 Gas Turbine India Conference (GTINDIA2013), 5-6 Dec 2013, Bangalore, Karnataka, India.

Aruna, ST and Edna , Richard (2013) Effect of different precursors, and method of fabrication on the properties of zinc stearate/oxide hierarchical superhydrophobic surfaces. In: National symposium on electrochemical science and technology, 2013-08-16, IISc, Bangalore.

Aruna, ST and Muniprakash, M and William Grips, VK (2013) Effect of titania particles preparation on the properties of Ni–TiO2 electrodeposited composite coatings. Journal of Applied Electrochemistry, 43 (8). pp. 805-815. ISSN 0021-891X

Aruna, ST and Sanjeeviraja, C and Balaji, N and Manikandanath, NT (2013) Properties of plasma sprayed La2Zr2O7 coating fabricated from powder synthesized by a single-step solution combustion method. Surface & Coating Technology , 219 . pp. 131-138.

Aruna, ST and Savitha, G and William Grips, VK (2013) The Corrosion Resistance of Nickel Electrocomposite Coating Containing BaFe12O19 Particles. ISRN Corrosion, 2013 . pp. 1-6.

Aruna, ST and Supriya, Nirmalkar (2013) Synthesis and properties of sol-gel based corrosion resistant nanocomposite coating. In: National Conference on “Scope of Advanced Materials in Energy & Environment, 2013-08-07, CMR Institute of Technology.

Aruna, ST and Venkatavaradan, S and Anne , Miriam and Balaji, N and William Grips, VK (2013) Effect of solution combustion synthesized ZnAl2O4 powder on the properties of electrodeposited Ni and Ni-composite coating. In: National symposium on electrochemical science and technology, 2013-08-23, IISc, Bangalore.

Ashwin, S and Karthikeyan, N (2013) Prediction of Launch Vehicle Noise during Lift-off using Modified Eldred’s Method. In: The 14th Asian Congress of Fluid Mechanics, 15-19 Oct 2013, Hanoi and Halong, Vietnam.

Augustin, MJ and Sakthi Sathya, P S and Viswamurthy , SR and Nitesh, Gupta and Ramesh, Sundaram (2013) Sensor sensitivity studies towards development of impact event detection system for composite laminates and metallic plates. In: ISSS National Conference on MEMS, Smart Materials, Structures and Systems, 2013-09-06, Pune, India.

B

Balaji, Sankar and Thennavarajan, S and Vijayendranath, V and Brijeshkumar , Shah and Khan, AA and Jana, S and Ramamurthy, S (2013) Aero-Thermodynamic modeling and gas path simulation for a twin spool turbo jet engine. Project Report. National Aerospace Laboratories, Bangalore.

Balaraju, JN (2013) Assessment of chromate and chromate-free conversion coatings for the corrosion protection of aerospace aluminum alloy. In: Workshop on Advanced Materials and Manufacturing Methods, 06 Feb 2013, NIT Trichy.

Balaraju, JN and Manikandanath, NT and Karuppannan, D and Sanjeev Kumar, S (2013) Drilling of carbon epoxy composite using nanocrystalline nickel alloy coated tools. In: INCCOM-12, 12 Dec 2013, HAL, Bangalore.

Balaraju, JN and Yoganandan, G and Zong, Chen and Low, Christopher and Qi, Guojun (2013) Preparation and electrochemical characterization of Mn-Mo oxyanion pore-filled oxide layers on aerospace aluminum alloy. In: Heat treatment & Surface Engineering Conference and EXPO 2013, 16 May 2013, Chennai Trade Centre, Chennai, T.N..

Barshilia, Harish C (2013) TiN coating on IDCA stirling cryocooler pistons. Technical Report. National Aerospace Laboratories, Bangalore.

National Aerospace Laboratories (2013) An improved multilayer solar selective coating for high temperature solar thermal applications and a process for the preparation thereof. Indian Application No.: 0182NF2013.

Barshilia, Harish C and Ananth, A and Gupta, Nitant and Anandan, C (2013) Superhydrophobic nanostructured Kapton® surfaces fabricated through Ar+O2 plasma treatment: Effects of different environments on wetting behavior. Applied Surface Science, 268 . pp. 464-471. ISSN 0042-207X

Barshilia, Harish C and Sibin, K P (2013) Control of infrared emittance of stainless steel using sputtered tungsten thin films for solar thermal power applications. Project Report. National Aerospace Laboratories.

Behera, SK and Hemanth, K and Bharath, MK and Gokul, M and Vaitheeswaran, SM (2013) Vision Based Tracking of Moving Target. In: 9th International Conference on Intelligent Unmanned System, Jaipur -2013, 25 Sept 2013, Jaipur, Rajasthan.

Bekinal, SI and Anil, TR and Jana, S (2013) Analysis of radial magnetized permanent magnet bearing characteristics. Progress in Electromagnetic Research B, 47 . pp. 87-105. ISSN 1937-6472

Bera, Parthasarathi and Seenivasan, H and Rajam, KS (2013) Studies on surface structure, morphology and composition of Co-W coatings electrodeposited with direct and pulse current using gluconate bath. Surface Review and Letters, 20 (1).

Bera, Parthasarathi and Seenivasan, H and Rajam, KS and Shivakumara, C and Parida, SK (2013) Characterization and microhardness of Co-W coatings electrodeposited at different pH using gluconate bath: A comparative study. Surface and Interface Analysis, 45 (6). pp. 1026-1036.

Bhagyaraj, J and Ramaiah, KV and Saikrishna, CN and Bhaumik, SK and Gouthama, - (2013) Behaviour and effect of Ti2Ni phase during processing of NiTi shape memory alloy wire from cast ingot. Journal of Alloys and Compounds, 581 (Decemb). ISSN 0925-8388

Bharath, MK and Hemanth, K and Ashish, P and Gokul, M and Vaitheeswaran, SM (2013) Vision Based Altitude Control for a Trajectory Following Quadrotor Using Position Feedback. In: 9th International Conference on Intelligent Unmanned System, Jaipur -2013, 29 Sep 2013, Jaipur, Rajasthan.

Bharathidasan, T and Kumar, Vijay and Bobji, MS and Chakradhar, RPS and Basu, Bharathibai J (2013) Effect of wettability and surface roughness on ice-adhesion strength of hydrophilic, hydrophobic and superhydrophobic surfaces. Applied Surface Science, 314 . pp. 241-250. ISSN 0042-207X

C

Chethan Kumar , TR and Sai Kiran, PVR and Balasubramanian, N and Upendranath, V (2013) Simulation Study of Aircraft AC Generator with Electrical Fault Insertion. In: (C2SPCA) 2013, 10 Oct 2013, Oxford College of Engineering ,Bangalore.

Choudhury, Balamati and Jha , RM (2013) A Review of Metamaterial Invisibility Cloaks. Computers, Materials & Continua, 33 (3). pp. 275-303. ISSN 1546-2226

Choudhury, Balamati and Manickam, Sangeetha and Jha , RM (2013) Soft Computing Techniques for Mutual Coupling Reduction in Metamaterial Antenna Array. Journal of Optimization, 2013 . pp. 1-8. ISSN 1573-2878

Choudhury, Balamati and Om Prakash, Acharya and Amalendu, Patnaik (2013) Bacteria Foraging Optimization in Antenna Engineering: An Application to Array Fault Finding. International Journal of RF and Microwave Computer-Aided Engineering , 23 (2). pp. 141-148.

Choudhury, Balamati and Reddy, PV and Bisoyi, Sanjana and Jha , RM (2013) Soft Computing for Terahertz Metamaterial Absorber Design for Biomedical Application. Computers, Materials & Continua, 37 (3). ISSN 1546-2226

Choudhury, Balamati and Sangeetha, M and Jha , RM (2013) Particle swarm optimization for multiband metamaterial fractal antenna. Journal of Optimization, 2013 . pp. 1-9. ISSN 1573-2878

Choudhury, Balamati and Sanjana, Bisoyi and Jha , RM (2013) Bacteria Foraging Algorithm for Metamaterial Design and Optimization. In: IEEE AEMC 2013, 2013-12-18, Bhubaneswar.

Choudhury, Balamati and Singh, Hema and Bommer, JP and Jha , RM (2013) RF field mapping inside large passenger aircraft cabin using refined ray-tracing algorithm. IEEE Antennas and Propagation Magazine, 55 (1). pp. 276-288.

Choudhury, Balamati and Singh, Hema and Jha , RM (2013) RF Field Build-up inside a Manned Space Vehicle using Novel Ray-Tracing Algorithm. International Journal of Aerospace Engineering, 2013 .

Choudhury, Balamati and Thiruveni, B and Reddy, Pavani Vijay and Jha , RM (2013) Soft Computing for Terahertz Metamaterial Absorber Design for Biomedical Application. In: Metamaterial Symposium, ICCES, 5 May 2013, Seattle, USA.

Chowdhury, P and Krishnan, M and Barshilia, Harish C and Rao, DV Sridhara and Shivakumara, C (2013) Structural and magnetic properties of SmCo5/Co exchange coupled nanocomposite thin film. Journal of Magnetism and Magnetic Materials, 342 . pp. 74-79. ISSN 0304-8853

Chowdhury, P and Krishnan, M and Barshilia, Harish C and Sridhara Rao , DV and Shivakumara, C (2013) Sprintronic materials: Nanostructures and Devices. In: BRNS, AICTE, DST, CSIR and ISRO sponsored National Conference on Spintronic Materials: Nanostructures and Devices (SMND-2011), Physics Procedia.

Chowdhury, P and Thomas, Ann Nimmy and Sharma, Megha and Barshilia, Harish C (2013) A facile approach for in situ measurement of anode temperature during the growth of self-ordered nanoporous anodic alumina thin films: Influence of Joule heating on pore microstructure. Electrochimica Acta . ISSN 0013-4686

Claretti, R and Hossain, J and Harrington, JT and Bernstein, JA and Verma, SB and Kapat, JS (2013) Heat transfer study on multiple walls of an impingement channel with variable jet heights - HT2013-17054. In: Proceedings of the ASME 2013 Summer Heat Transfer Conference HT2013, 14-19 Jul 2013, Minneapolis, MN, USA.

D

Danish, TH and Sathiyamoorthy, K and Prateesh Kumar, P and Manjunath, P (2013) Characterization of Strut-mounted 'Through Cavity' for scramjet applications. In: 14th Asia Congress of Fluid Mechanics - 14ACFM, 15-19 Oct. 2013, Hanoi and Halong, Vietnam.

Danish, TH and Sathiyamoorthy, K and Srinivas, J and Manjunath, P (2013) Drag Characterization of Strut-mounted 'Through Cavity' for Scramjet Applications. In: 23rdNational Conference on I. C. Engine and Combustion (NCICEC 2013), 13-16 Dec 2013, SVNIT, Surat, India.

Danish, TH and Sathiyamoorthy, K and Srinivas, J and Manjunath, P (2013) Drag characterization of Strut-mounted 'Through Cavity' for scramjet applications. In: 23rd National Conference on I.C. Engine and Combustion (NCICEC 2013), 13-16 Dec. 2013, SVNIT, Surat, India.

Danish, TH and Sathiyamoorthy , K and Prateesh Kumar, P and Manjunath, P (2013) Characterization of Strut-mounted ‘Through Cavity’ for Scramjet Applications. In: The 14th Asia Congress of Fluid Mechanics - 14ACFM, 15-19 Oct 2013, Hanoi and Halong, Vietnam.

Deepthi, B and Praveen, Kumar and Srinivas, G and Barshilia, Harish C (2013) High performance nanostructured Cr-WS2 solid lubricant coatings prepared on mechanically textured substrates. Project Report. National Aerospace Laboratories, Bangalore.

Devendran, B and Sudesh, K Kashyap (2013) Modeling Specifications for HiVision Millimeter Wave Radar for Multisensory Enhanced Vision Systems. In: National Conference E-Innovation-2013, 23rd March 2013, Tumkur.

Dutta, Soma and Shubha, V and Ramesh, TG (2013) Reduction in thermal conductivity of Bi-Te alloys through grain refinement method. Bulletin of Materials Science, 36 (5). pp. 853-857. ISSN 0250-4707

E

Edna , Richard and Maria, Shalini and Anandan, C and Basu, Bharathibai J and Aruna, ST (2013) Effect of silica and heat treatment on PS-SiO2 wetting behavior. Surface Innovations, 1 (S12). pp. 105-111.

Ezhil Selvi, V and Balaraju, JN (2013) Autocatalytic duplex Ni-P/Ni-W-P coatings on AZ 31B magnesium alloy. Surface and Coatings Technology, 240 . pp. 103-109. ISSN 0257-8972

Ezhil Selvi, V and Mimosa, Sarma and Balaraju, JN (2013) Electroless nickel composite coatings containing solid lubricant MoS2 particles. In: NSEST 2013, 2013-08-23, IISc, Bangalore.

G

Ghosh, SK and Chowdhury, P and Dogra, A (2013) Magnetic and magnetoresistance studies of the evolution of the magnetic layer structure with Co layer thickness in electrodeposited Co–Cu/Cu multilayers. Journal of Magnetism and Magnetic Materials, 327 . pp. 121-124. ISSN 0304-8853

Giridhar, Babu Y and Gururaj, L and Ashok Babu, TP and Felix, J and Sreenivas Rao, VK and Vinodkumar, N (2013) Experimental and Numerical Investigation of Effect of Blowing Ratio on Film Cooling Effectiveness and Heat Transfer Coefficient over a Gas Turbine Blade Leading Edge Film Cooling Configurations. In: ASME 2013 GAS TURBINE INDIA CONFERENCE, 5-6 Dec 2013, CSIR-NAL, Bangalore.

Gopinath , L and Ravishankar, S and Swathi Bale, M (2013) Mathematical Approaches with Least Square Measurement in Cylindricity Measurement. In: 8th International conference on Advances in Metrology, 20-23, February, 2013, NPL, New Delhi.

Gupta, Nitant and Kavya, M V and Singh, Yogesh and Jyothi, J and Barshilia, Harish C (2013) Superhydrophobicity on transparent fluorinated ethylene propylene films with nano-protrusion morphology by Ar+O2 plasma etching: Study of the degradation in hydrophobicity after exposure to the environment. Journal of Applied Physics, 114 . p. 164307. ISSN 0021-8979

Gupta, Nitesh and Augustin, MJ and Sakthi Sathya, P S and Saransh, Jain and Viswamurthy , SR and Gaddikeri, KM and Ramesh, Sundaram (2013) Structural Health Monitoring of Composite Aircraft Structures Using Fiber Bragg Grating Sensors. Journal of the Indian Institute of Science, 93 (4). pp. 735-750. ISSN 0970-4140

Guruprasad, R (2013) A cross association analysis of scientific designations (grades) with the 'awareness of use of electronic information 'resources' amongst the Indian aerospace scientists and engineers. In: Advancing boundaries of knowledge of Library Science and Information Technology. Prof. K Balasubramanian Commemoration Volume Organizing Committee, Coimbatore, pp. 495-515.

Guruprasad, R and Marimuthu, P (2013) Aerospace Digital Libraries and Its Impact on Aerospace Scientists and Engineers of Bangalore - A Research Survey. International Journal of Advanced Research in IT and Engineering (IJAET), 2 (3). pp. 33-49. ISSN 2278-6244

Guruprasad, R and Marimuthu, P (2013) ‘Association of Demographic Variables versus Frequency of Use of Aerospace Gateways’: A Survey of Aerospace Scientists and Engineers of Bangalore. International Journal of Advanced Research , 1 (3). pp. 175-183. ISSN 2320-5407

Guruprasad, R and Marimuthu, P (2013) Association of demographic variables versus frequency of use of core aerospace engineering e-Databases: a research survey of aerospace scientists and engineers of Bangalore. International Journal of Science, Technology and Society., 1 (1). pp. 1-8.

Guruprasad, R and Marimuthu, P (2013) Digital libraries (internet resources) of Ph.D. dissertations and theses and its impact among the aerospace scientists and engineers of Bangalore. DISCOVERY SCIENCE, 4 (10). pp. 4-8. ISSN 2278-5485, EISSN: 2278-5477

Guruprasad, R and Marimuthu, P (2013) Open Access Journals and its Use Patterns Among The Aerospace Scientists AND Engineers of Bangalore. International Journal of Advances in Engineering and Technology, 6 (3). pp. 1109-1122. ISSN 2231-1963

Guruprasad, R and Marimuthu, P (2013) Use Patterns of Aerospace Engineering E-Reference Sources among the Aerospace Scientists and Engineers of Bangalore: A Research Survey. International Journal of Engineering and Management Research, 3 (6). pp. 57-63. ISSN 2250-0758

Guruprasad, R and Marimuthu, P and Nikam, Khaiser (2013) Use Patterns of E-Journals from Aerospace Professional Associations by the Aerospace Scientists and Engineers of Bangalore. International Journal of IT, Engineering and Applied Sciences Research (IJIEASR), 2 (3). pp. 39-53. ISSN 2319 - 4413

H

Hossain, J and Tran, LV and Carpenter, C and Wang, W and Verma, SB and Kapat, JS (2013) Numerical study of enhancement of regenerative cooling using ribs - AIAA 2013-3996. In: 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, 14-17 Jul 2013, San Jose, CA, USA.

Hussain, GF and Nasser, AS and Nawaz, MM and Mondal, BK and Karthikeyan, N (2013) Effect of perforated tabs on the noise field of an axisymmetric jet. Applied Mechanics and Materials, 307 . pp. 250-256. ISSN ISSN: 1662-7482

I

Ismail, Shaik and Pashilkar, AA and Ayyagari, Ramakalyan and Sundararajan, N (2013) Improved autolanding controller for aircraft encountering unknown actuator failures. In: IEEE Symposium Series on Computational Intelligence, 16 Apr 2013, Singapore.

Ismail, Shaik and Pashilkar, AA and Ramakalyan, Ayyagari and Sundararajan, N (2013) Neural-Sliding Mode Augmented Robust Controller for Autolanding of Fixed Wing Aircraft. Journal of Artificial Intelligence and Soft Computing Research, 2 (4). pp. 317-330. ISSN 2083-2567

J

Jagannadham, VV and Sivaramakrishnan, Rajalakshmy (2013) Power Analysis of Low Power Virtex 6 FPGA based Communication FloSwitch Design. International Journal of Engineering Research and Technology, 2 (11). pp. 233-243. ISSN 2278-0181

Jain, Anjana and Siva Subba Rao, P and Jayanth Kumar, S (2013) PVDF-PZT Composite Films for Strain Sensing Applications. In: ISSS National Conference on MEMS, Smart Materials, Structures and Systems, 06-07 Sept 2013, Pune, India.

Janaki Rami Reddy, M and Veera Sesha Kumar, C and Rajesh, E and Rajeshwari Natarajan, S and Nitesh, Kumar and Ramamurthy, S and Rajendran, R and Jayaraman, M (2013) Indigenous Development (Phase-I) of High speed Alternator with Rectifier Unit. Project Report. National Aerospace Laboratories.

Jayaprakash, C and Sathiyamoorthy, K and Khan, AA and Venu, G and Venkat Iyengar, S and Srinivas, J and Prateesh Kumar, P and Manjunath, P (2013) Development of Mach 3.6 water cooled facility nozzle. In: National Propulsion Conference, Feb 2013 , Chennai.

Jigajinni, SM and Venkateswarlu, K and Kori, SA (2013) Effect of a Grain Refiner Cum Modifier on Mechanical Properties of Al-7Si and Al-11Si Alloys. Metals and Materials International, 19 (2). pp. 171-181.

Jyothi Kumar, Puttam (2013) Implementation and Testing of Overset Grid Capability for Supersonic Flows. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2013), 21 Nov 2013, Hyderabad, India.

K

Kamalakannan, GM (2013) Design and development of Control and Instrumentation system for Aerospace class autoclave. In: International Conference on Advanced Electronic Systems - 2013, 20 Sep 2013, CEERI, Pilani, India.

Kamalakannan, GM (2013) Open Source Embedded Controller for SMA actuated Morphing Wing MAV. In: International Conference on Advanced Electronic Systems - 2013, 20 Sep 2013, CEERI, Pilani, India.

Kamali, C and Pashilkar, AA and Indira, N and Goyal, Anup and Premalatha, and Mudkavi, Vidyadhar Y (2013) Modeling and Simulation of Wake Encounter for a Fighter Aircraft. International Journal of Aerospace Innovations, 4 (3-4). pp. 65-74. ISSN 1757-2258

Karthikeyan, N and Ashwin Kumar, S and Venkatakrishnan, L (2013) Correlation Studies in the Acoustic Far-Field of Non-ideally Expanded Supersonic Jets. In: 19th AIAA/CEAS Aeroacoustics Conference , 25 May 2013, Berlin, Germany.

Karthikeyan, N and Kumar, Ashwin and Verma, SB and Venkatakrishnan, L (2013) Effect of Spike Truncation on the Acoustic Behavior of Annular Aerospike Nozzles. AIAA Journal, 51 (9). pp. 2168-2182. ISSN 0001-1452

Karthikeyan, N and Kumar, Ashwin and Verma, SB and Venkatakrishnan, L (2013) Effect of spike truncation on the acoustic behavior of annular aerospike nozzles. AIAA Journal, 51 (9). pp. 2168-2182. ISSN 0001-1452

Karuppannan, D and Rawat, RS and Ramachandra, HV and Saji, D and Byji, Varughese (2013) Composite for reinforcement of damaged metallic aircraft wings. Journal of Aerospace Sciences and Technology, 65 (1). pp. 8-13. ISSN 0972-950X

Kashyap, SK and Devendran, B and Rama Murthy, TV (2013) Modeling specifications for HiVision Millimeter Wave Radar for multisensory Enhanced Vision Systems. In: National Conference E-INNOVATION-2013, 23 Mar 2013, Department of Electronics and Communication, Shridevi Institute of Engineering and Technology, Tumkur.

Kashyap, SK and Devendran, B and Ramamurthy , TV (2013) Toolbox for material classification of MMWR and FLIR for Enhanced Vision System. In: WiSE-2013: Wireless, Signal Processing and Embedded Systems, 2013-06-21, BMS College of Engineering, Bangalore.

Kashyap, SK and Raol, JR (2013) Decision Fusion using Fuzzy Logic Type 1 for Two Aviation Scenarios. Journal of Aerospace Sciences and Technology, 65 (3). pp. 273-286.

Kashyap, SK and Satish, K Vegula and Shantha Kumar, N (2013) Infrared and Millimeter Wave Radar Sensor Models for Enhanced Vision System Simulation Studies. Project Report. National Aerospace Laboratories, National Aerospace Laboratories.

Khadeeja Nusrath, TK (2013) Automated Flight Data Management System(AFDMS) for Aircraft System Identification. In: Matlab Expo 2013, 21 Aug 2013, Nimhans Convention Centre, Bangalore.

Khatri, AK and Sinha, NK (2013) Accessible regions for controlled aircraft maneuvering. Journal of Guidance, Control and Dynamics, 36 (6). pp. 1829-1834. ISSN 0731-5090

Kidambi, R (2013) Inviscid Faraday waves in a brimful circular cylinder. Journal of Fluid Mechanics, 724 . pp. 671-694. ISSN 0022-1120

Kishor Kumar, and Prathapanayaka, R (2013) DESIGN AND ANALYSIS OF A HIGH PRESSURE TURBINE USING COMPUTATIONAL METHODS FOR SMALL GAS TURBINE APPLICATION. In: ASME 2013 Gas Turbine India Conference, December 5-6, 2013, NAL, Bengaluru.

Krishna, NN and Tejas, R and Sivaprasad, K and Venkateswarlu, K (2013) Study on cryorolled Al–Cu alloy using X-ray diffraction line profile analysis and evaluation of strengthening mechanisms. Materials and Design, 52 . pp. 785-790. ISSN 0261-3069

Krishnan, M and Predeep, P and Barshilia, Harish C and Chowdhury, P (2013) High Thermal Stability of CoFe/Cu GMR Multilayer stack for Automobile Application. In: IUMRS ICA-2013, 16 Dec 2013, IISc, Bangalore.

Kulkarni, PD and Krishnan, M and Barshilia, Harish C and Predeep, P and Chowdhury, P (2013) Development of pinned electrode for magnetic tunnel junction with perpendicular magnetic anisotropy. In: IUMRS-ICA-2013, 16 Dec 2013, IISc, Bangalore.

Kulkarni, PD and Sellarajan, Boominatha and Krishnan, M and Barshilia, Harish C and Chowdhury, P (2013) Anisotropic magnetic properties of bi-layered structure of ordered Co nanorod array: Micromagnetic simulation and experiments. Journal of Applied Physics, 114 (17). ISSN 0021-8979

Kulkarni, PD and Sellarajan, Boominatha and Krishnan, M and Barshilia, Harish C and Chowdhury, P (2013) Anisotropic magnetic properties of bi-layered structure of ordered Co nanorod arrays: Micromagnetic simulations and experiments. Journal of Applied Physics, 114 (17). p. 173905. ISSN 0021-8979

Kumar, N and Nair, Manoj T (2013) Application of density corrected Spalart-Allmaras model to flow past ogive cylinder at high angles of attack. Journal of Applied Fluid Mechanics, 6 (3). pp. 375-384. ISSN 1735-3572

Kumar, Prateek and Dilli Babu, P and Mohan, L and Anandan, C and William Grips, VK (2013) Wear and Corrosion Behavior of Zr-Doped DLC on Ti-13Zr-13Nb Biomedical Alloy. Journal of Materials Engineering and Performance, 22 . pp. 283-293. ISSN 1059-9495

Kumar, Rajan and Wiley, Alex and Venkatakrishnan, L and Alvi, Farukh (2013) Role of coherent structures in supersonic impinging jets. Physics of Fluids, 25 . 076101-1. ISSN 1070-6631

Kumari, Asha and Varughese, Byji and Saji, D (2013) Stress Analysis of a Stepped-Lap Bonded Repair Joint in Composite Laminate under Compressive Loading. In: INCCOM-12, 12 Dec 2012, Bangalore.

Kundan , K Verma and Sandeep, DN and Sugun, BS and Athimoolaganesh, S and Kotresh, Gaddikeri M and Ramesh, Sundaram (2013) Novel Design of Cocured Composite ‘T’ Joints with Integrally Woven 3D Inserts. In: 5th World Conference on 3D Fabrics and Their Applications, 16-17 Dec 2013, Delhi, India,.

L

Lakshmi, RV and Aruna, ST and Basu, Bharathibai J (2013) A simple cost-effective and eco-friendly wet chemical process for the fabrication of superhydrophobic cotton fabrics. Applied Surface Science, 277 . pp. 302-309. ISSN 0042-207X

Lakshmi, RV and Balaraju, JN and Mohan, AVN and Basu, Bharathibai J (2013) Inhibitor doped Sol-gel nanocomposite coatings for the corrosion protection of aircraft aluminum alloys. In: NSEST 2013, 2013-08-23, IISc, Bangalore.

Lakshmi, RV and Balaraju, JN and Mohan, AVN and Basu, Bharathibai J (2013) Preparation and characterization of environmentally friendly sol-gel hybrid coatings for corrosion protection of AA2024. In: CORCON 2013, 2013-09-30, New Delhi.

M

Majeed, M and Kar, IN (2013) Design and convergence analysis of stochastic frequency estimator using contraction theory. IET Signal Process, 7 (5). pp. 389-399. ISSN 1751-9675

Manikandanath, NT and Balaraju, JN and Ying, Yang and Zhong , Chen (2013) Solder reaction between electroless Ni-Sn-P and Sn-3.5Ag. In: NSEST 2013, 2013-08-23, IISc, Bangalore.

Manjunath, P and Sathiyamoorthy, K and Venu, G and Venkat Iyengar, S and Jayaprakash, C and Srinivas, J and Prateesh Kumar, P (2013) Establishment of aeropropulsion mach 3.6 test facility for high speed combustor research (AIAA 2013-2624). In: AIAA Ground Testing Conference, 24-27 June 2013, San Diego, CA.

Manjunatha, CM and Ramesh , Bojja and Jagannathan, N and Kinloch, AJ and Taylor, AC (2013) Enhanced fatigue behavior of a glass fiber reinforced hybrid particles modified epoxy nanocomposite under WISPERX spectrum load sequence. International Journal of Fatigue, 54 . pp. 25-31. ISSN 0142-1123

Manohar , HR and Chandrashekharaiah, TM and Venkateswarlu, K and Kori, SA (2013) Sliding wear performance of reinforced A413 alloy at elevated temperatures. International Journal of Advanced Manufacturing Technology, 65 . pp. 395-402. ISSN 1068-1086

Markose, S and Patange, SSR and Raja, S and Anjana, Jain and Elias, Bindu (2013) Experimental Study on Dimension Effect of PVDF Film on Energy Harvesting. International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering, 2 (1). pp. 270-278. ISSN 2278 - 8875

Meenu, Srivastava and Balaraju, JN and Ravisankar, B (2013) Oxidation and Hot Corrosion behaviour of Modified NiCoCrAlY Coatings. In: THERMANS 2013, 2013-12-19, Homi Bhabha National Institute, Mumbai.

Mohan, Kumar M and Jacob, CV and Lakshminarayana, N and Puneeth, BM and Nagabhushana, M (2013) Buckling analysis of woven glass epoxy laminated composite plate. American Journal of Engineering Research , 2 (7). pp. 33-40. ISSN 2320-0847

Mohan, Kumar M and Rajesh, S and Yogesh, H and Yeshaswini, BR (2013) Study on the effect of stress concentration on cutout orientation of plates with various cutouts and bluntness. International Journal of Modern Engineering Research, 3 (3). pp. 1295-1303. ISSN 2249-6645

Mohan, Kumar M and Rao, AH and Jaikrishnan, V and Arun, SN and Chandy, M (2013) Estimation of plastic stress concentration factor around elliptical cut outs. International Journal of Engineering Research and Development, 8 (8). pp. 33-40. ISSN 2278-067X

Mukund, R and Chandan Kumar, R (2013) Hot-wire measurements behind a propeller model. In: The Third National Conference on Wind Tunnel Testing , 2013-08-23, VSSC, Trivandrum.

Muralidhara, HS and Muthu Selvan, G and Vinod Kumar, Vyas and Jeyaseelan, AR and Rajeshwari Natarajan, S and Hariharan, R and Satish Kumar, M (2013) Design, Development and Experimental Evaluation of Reverse Flow Combustor. In: National Conference on IC engines and combustion, 13 Dec 2013, NIT,surat.

Muthu Selvan, G and Muralidhara, HS and Dineshkanth, TP and Lakshminarayana, Y (2013) Computational Analysis of Reverse Flow Combustor for Small Gas Turbine Application. In: National Propulsion Conference 2013, 21 Feb 2013, Indian Institute of Madras, Chennai.

N

Nagarajan, Kaushik Kumar and Cordier, L and Airiau, C (2013) Development and application of a reduced order model for the control of self-sustained instabilities in cavity flows. Communication in Computational Physics, 14 . pp. 186-218. ISSN 1991-7120

Nair, RU and Madhumitha , J and Jha , RM (2013) Broadband em performance characteristics of single square loop FSS embededded monolithic radome. International Journal of Antennas and Propagation, 2013 . pp. 1-9.

Nanda, Manju and Jayanthi, J (2013) Effective verification and validation strategy for safety-critical embedded systems. International Journal of Software Engineering & Applications (IJSEA), 4 (2). ISSN 0975-9018

Narasimhan, SV and Veena, S (2013) New unbiased adaptive IIR filter: it’s robust and variable step-size versions and application to active noise control. Signal, Image and Video Processing, 7 (1). 197-207 . ISSN 1863-1703

Narayan, Shiv and Jha , RM (2013) A Novel Metamaterial FSS-based Structure for Wideband Radome Applications. Computers, Materials & Continua, 37 (2). . ISSN 1546-2226

Narayan, Shiv and Latha, S and Jha , RM (2013) EM analysis of metamaterial based radar absorbing structure (RAS) with dual-resonant characteristics. In: ICCES, 5 May 2013, Seattle, USA.

Narayan, Shiv and Nair, RU and Jha , RM (2013) Mode-matching generalised scattering matrix based electromagnetics performance analysis of thick frequency selective surfaces for airborne applications. Defence Science Journal, 63 (3). pp. 249-253. ISSN 0011-748X

Narayanan, Sathia and Lakshmi, RV and Basu, Bharathibai J and Channa Raju, - and Venkatakrishnan, L (2013) Supersonic testing of NAL binary pressure sensitive paint. International Journal of Aerospace Innovations, 5 (1). pp. 1-10. ISSN 1757-2258

Niranjanan, CK and Malagi, Keshav and Nagarajan, Kaushik Kumar and Ramesh, V and Deshpande, SM (2013) The process of generating single large combined cloud for grid-free solvers. In: 15th Annual CFD Sympoisum, 9-10 Aug 2013, Bangalore, Karnataka, India.

Nitesh, Gupta and Augustin, MJ and Sakthi Sathya, P S and Saransh, Jain and Viswamurthy , SR and Kotresh, Gaddikeri M and Ramesh, Sundaram (2013) Structural Health Monitoring of Composite Aircraft Structures Using Fiber Bragg Grating Sensors. Journal of the Indian Institute of Science, 93 (4). pp. 735-750. ISSN 0970-4140

Niyati, Sharma and Hema, Singh and Jha , RM (2013) Pattern Synthesis of Non-uniform Array using Weighted Least Square Algorithm. In: AEMC 2013, 2013-12-18, Bhubaneswar.

P

Pashilkar, AA and Ismail, Shaik and Ayyagari, Ramakalyan and Sundararajan, N (2013) Design of a nonlinear dynamic inversion controller for trajectory following and maneuvering for fixed wing aircraft. In: IEEE Symposium Series on Computational Intelligence, 16 Apr 2013, Singapore.

Patil, V and Anjana, Jain (2013) Design of Stretching Unit for Continuous Β-Phase PVDF Film and Analysis of Piezoelectric Film Sensor for Transducer Applications. International Journal of Engineering Research and Technology, 2 (12). pp. 3008-3011. ISSN 2278-0181

Pavani, Vijaya Reddy and Choudhury, Balamati and Jha , RM (2013) Permittivity and Permeability Tensors for a Paraboloidal Invisibility Cloaking Shell. In: IEEE AEMC 2013, 2013-12-18, Bhubaneswar.

Pradeep, Shetty and Subrahmanya, MB and Kulkarni, DS and Rajani, BN (2013) CFD Simulation of Flow Past Micro Air Vehicle Wings. Project Report. National Aerospace Laboratories, Bangalore.

Pradeep, Shetty and Subrahmanya, MB and Kulkarni, DS and Rajani, BN (2013) CFD simulation of flow past MAV wings. International Journal of Aerospace Innovations, 5 (1). 19-28. ISSN 1757-2258

Pradhan, Meghna and Rajaguru, K and Siju, John and Manikandanath, NT and Selvakumar, N and Chowdhury, P and Barshilia, Harish C (2013) Synthesis of Single- and Multi- Walled Carbon Nanotubes using Single Zone Pyrolysis Technique. Project Report. National Aerospace Laboratories.

Prakash, Shashikala and Renjith kumar, TG and Subramani, H (2013) FPGA implementation of the LMS adaptive filter for active vibration control. International Journal of Research in Engineering and Technology, 2 (10). ISSN 2319-1163

Prathapanayaka, R and Vinodkumar, N and Krishnamurthy, SJ (2013) Design and development of three bladed propeller for micro air vehicles. In: 9th International Conference on Intelligent Unmanned Systems (ICIUS 2013), 25-27 September 2013, Jaipur, India.

Prathapanayaka, R and Vinodkumar, N and Krishnamurthy, SJ and Hari Krishna, N (2013) DESIGN AND ANALYSIS SOFTWARE FOR PROPELLERS. In: ASME 2013 Gas Turbine India Conference, December 5-6, 2013, NAL, Bengaluru.

R

Radhakrishna, M and Jana, S and Arunkumar, V and Sreedhar, BK (2013) Development of Active Magnetic Bearings for a Vertical Centrifugal Pump Rotor. Advances in Vibration Engineering, 12 (4). pp. 329-335.

Raghavendra, R and Indrani, V and Poornima, Narayana (2013) Impact of Cloud Computing Technology for Library Services. In: National Conference on Reaching Out to Users through Technology (ROUTE-2013, 2013, Chennai.

Rajani, BN and Subrahmanya, MB and Vinay Kumar , KN and Rajesh, A (2013) Numerical Simulation of Flow Past a Prolate Spheroid. In: IIST Research Scholars Day- 2013, 16 Dec 2013, Thiruvananthapuram.

Rajashekar, C and Raghukumar, HS and Janaki Rami Reddy, M and Bhaskaran, M and Isaac, JJ (2013) High-Speed Shadowgraph Visualisation of Flow in a Miniature Hydrogen-Fuelled Valveless Pulsejet Engine. In: International Conference on Intelligent Unmanned Systems-ICIUS-2013, September 25 to 27, 2013, Jaipur, India.

Rajashekar, C and Raghukumar, HS and Janaki Rami Reddy, M and Bhaskaran, M and Isaac, JJ (2013) High-Speed Shadowgraph Visualisation of Flow in a Miniature Hydrogen-Fuelled Valveless Pulsejet Engine. [Video]

Rajashekar, C and Raghukumar, HS and Janaki Rami Reddy, M and Bhaskaran, M and Isaac, JJ (2013) High-Speed Shadowgraph Visualisation of Flow in a Miniature Hydrogen-Fuelled Valveless Pulsejet Engine. [Video]

Rajashekar, C and Raghukumar , HS and Janaki Rami Reddy, M and Baskaran, M and Isaac, JJ (2013) High-Speed Shadowgraph Visualisation of Flow in a Miniature Hydrogen-Fuelled Valveless Pulsejet Engine. In: 13th ICIUS, 25 Sept 2013, Jaipur, Rajasthan.

Rajesh, A and Kulkarni, DS and Rajani, BN (2013) Numerical Analysis of Transitional Flow Past Flat Plate. In: Fortieth National Conference on Fluid Mechanics and Fluid Power, 12-14 Dec 2013, National Institute of Technology (NIT), Hamirpur (HP).

Ramesh, V and Nagarajan, Kaushik Kumar and Malagi, Keshav (2013) The Process of Generating Single Large Combined Cloud for Grid-Free Solvers. In: 15th AeSI CFD Symposium, 9 Aug 2013, IISc, Bangalore.

Rathod, VT and Mahapatra, D Roy and Anatony, Jeyaseelan and Soma , Dutta (2013) Large-area Piezoceramic Coating with IDT Electrodes for Ultrasonic Sensing Applications. In: SPIE Proceeding , Smart Structures /NDE, San Diego.

Revathi, A and Rao, Sandhya and Kavitha, Rao V and Singh, MM and Sendil, Murugan M and Srihari, Shylaja and Dayananda, GN (2013) Effect of strain on the thermomechanical behavior of epoxy based shape memory polymers. Journal of Polymer Research, 20 (113). pp. 1-10. ISSN 1572-8935

Richand, Edna and Lakshmi, RV and Aruna, ST and Basu, Bharathibai J (2013) Simple cost-effective and eco-friendly wet chemical process for the fabrication of superhydrophobic cotton fabrics. Applied Surface Science, 277 . pp. 302-309. ISSN 0042-207X

Roy, Swapneel and Thanusha, MT and Rahul, BV and Khan, AA (2013) Effect of Shocks on Mixing and Thrust in Over-expanded Nozzles. Frontiers in Aerospace Engineering, 2 (2). pp. 136-142. ISSN 2325-6796

S

Sagdeo, A and Mondal, P and Upadhyay, A and Sinha, AK and Srivastava, AK and Gupta, SM and Chowdhury, P and Ganguli, T and Deb, SK (2013) Correlation of microstructural and physical properties in bulk BiFeO3 prepared by rapid liquid-phase sintering. Solid State Sciences, 18 . pp. 1-9. ISSN 1293-2558

Sai Kiran, PVR and VijayaramKumar, S and Vijaya Kumar , PS and Vikram , V and Upendranath, V (2013) Application of Kalman Filter to prognostic method for estimating the RUL of a Bridge Rectifier. In: (C2SPCA) 2013, 10 Oct 2013, Oxford College of Engineering ,Bangalore.

Saikrishna, CN and Ramaiah, KV and Bhagyaraj, J and Gouthama, - and Bhaumik, SK (2013) Influence of stored elastic strain energy on fatigue behaviour of NiTi shape memory alloy thermal actuator wire. Materials Science and Engineering A, 587 . pp. 65-71. ISSN 0921-5093

Saikrishna, CN and Ramaiah, KV and Vidyashankar, B and Bhaumik, SK (2013) Effect of intermittent overload cycles on thermomechanical fatigue life of NiTi shape memory alloy wire. Metallurgical and Materials Transactions A, 44A . C5-8. ISSN 1073-5623

Saji, D (2013) Current product development technologies for polymer matrix composite materials. In: National Workshop on Recent Advances in Characterization of Aerospace Materials through Impact Testing (RACAMIT-2013, 23 Mar 2013, Dept of Aerospace Engg., MIT Campus,Anna Unviversity,Chennai-600044.

Sanketh , Ailneni and Sudesh, K Kashyap and Shantha Kumar, N (2013) Evaluation of Multi Rate Sensors based Attitude & Heading Estimation via Process in the Loop Simulations for Unmanned Aerial Vehicles. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle, 21-23 November 2013, Hyderabad.

Sanketh , Ailneni and Sudesh, K Kashyap and Shantha Kumar, N (2013) INS/GPS Fusion for Navigation of Unmanned Aerial Vehicles. In: 9th International Conference on Intelligent Unmanned Systems, 25-27 September 2013, Jaipur.

Santosh, DR and Hemanth, K and Bharath, MK and Vaitheeswaran, SM (2013) Image Mosaicing using Cylindrical Mapping. In: 9th International Conference on Intelligent Unmanned System, Jaipur -2013, 29 Sep 2013, Jaipur, India.

Santosh, DR and Hemanth, K and Bharath, MK and Vaitheeswaran, SM and Ramamurthy, TV (2013) Autonomous Attitude Stabilization of a Quadrotor. In: 9th International Conference on Intelligent Unmanned System, Jaipur -2013, 29 Sep 2013, Jaipur, Rajasthan.

Saransh, Jain and Augustin, MJ and Kundan , K Verma and Nitesh, Gupta and Ramesh, Sundaram and Hari, Prasad and Pillai, ACR (2013) Flight Data Analyses of Fiber Optic Based Airworthy Structural Health Monitoring System for UAV using Artificial Neural Networks. In: 9th International Conference on Intelligent Unmanned Systems, 2013-09-25, Jaipur, Rajasthan.

Sasikala, S and Chowdhury, P and Madhavan, KT (2013) Electro Active Polymer-based Dimple Actuators with Ultra-thin Metal Electrode for Flow Control. In: ICIUS-2013, 25 Sept 2013, Jaipur, Rajasthan.

Sasikala, S and Madhavan, KT and Ramesh, G and Chowdhury, P (2013) Electro-mechanical performance of electro-active polymer based actuators fabricated using ultra thin metal electrode. Sensors and Actuators A: Physical , 207 . pp. 43-48. ISSN 0924-4247

Sateesh, VL and Senthilkumar, P and Satisha, Vishwanath and Dayananda, GN (2013) Low Cycle Fatigue Evaluation of NiTi SESMA Thin Wires. In: The International Conference on Shape Memory and Superelastic Technologies (SMST), 20 - 24 May 2013, Prague, Czech Republic.

Sathiyamoorthy, K and Jayaprakash, C and Khan, AA and Venkat Iyengar, S and Srinivas, J and Prateesh Kumar, P and Manjunath, P (2013) Development of Mach 3.6 water cooled Facility Nozzle. In: National Propulsion Conference 2013, 21 Feb 2013, Indian Institute of Madras, Chennai.

Sathiyamoorthy, K and Jayaprakash, C and Manjunath, P and Srinivas, J and Prateesh Kumar, P (2013) Development of Combustion Driven Heating System for Semi-Free Jet Test Rig. In: National Propulsin Conference 2013, 21 Feb 2013, Indian Institute of Madras, Chennai.

Sathiyamoorthy, K and Venu, G and Jayaprakash, C and Srinivas, J and Prateesh Kumar, P and Manjunath, P (2013) Development of combustion driven heating system for semi-free jet test rig. In: National Propulsion Conference 2013, 21 Feb 2013, Indian Institute of Madras, Chennai.

Satish, K Vegula and Sudesh, K Kashyap and Shantha Kumar, N (2013) Automatic detection of runway incursions using on-board sensors. Project Report. CSIR-NAL, CSIR-NAL, Bangalore.

Seenivasan, H and Bera, Parthasarathi and Balaraju, JN and Rajam, KS (2013) XPS Characterization and Microhardness of Heat treated Co-W Coatings Electrodeposited with Gluconate Bath. Advanced Science Focus, 1 (3). pp. 262-268.

Seenivasan, H and Bera, Parthasarathi and Rajam, KS and Parida, SK (2013) Characterization and hardness of Co−P coatings obtained from direct current electrodeposition using gluconate bath. Surface Review and Letters, 20 (5). pp. 1350049-1350060.

Sellarajan, B and Kulkarni, PD and Krishnan, M and Barshilia, Harish C and Chowdhury, P (2013) Magnetic properties of ordered bi-layer nanowire arrays with different Co crystallographic structures. Applied Physics Letters, 102 . 122401-1-122401-4. ISSN 0003-6951

Sellarajan, B and Kulkarni, PD and Krishnan, M and Nagaraja, HS and Barshilia, Harish C and Chowdhury, P (2013) Effective magneto-crystalline anisotropy in ordered Co nanowire array. In: IUMRS-ICA-2013, 16 Dec 2013, IISc, Bangalore.

Sellarajan, Boominatha and Siju, John and Barshilia, Harish C and Chowdhury, P (2013) Structural evolution of porous anodic alumina membrane by the influence of critical current density in H2SO4. Project Report. National Aerospace Laboratories, Bangalore.

Selva Kumar , N and Barshilia, Harish C and Krupanidhi, SB (2013) Studies on hot-filament chemical vapor deposition grown graphene sheets. In: IUMRS-ICA 2013, 16 Dec 2013, IISc, Bangalore.

Selvakumar, N and Krupanidhi, SB and Barshilia, Harish C (2013) Carbon Nanotubes- Based Tandem Absorber with Tunable Spectral Selectivity: Transition from Near-Perfect Blackbody Absorber to Solar Selective Absorber. Advanced Materials, 26 (16). pp. 2552-2557. ISSN 1521-4095

Selvakumar, N and Mohamed, MJS and Narayanasamy, R and Venkateswarlu, K (2013) Forming limit diagram and void coalescence analysis of AA5052 coated with molybdenum-based ceramic nanocomposites. Materials and Design, 52 . pp. 393-403. ISSN 0261-3069

Selvakumar, N and Thaker, Amar and Siju, John and Barshilia, Harish C (2013) Vapor-solid growth of molybdenum oxide nanowhiskers: Wettability studies and growth process. Nanoscience and Nanotechnology letters, 5 (8). pp. 842-849. ISSN 1941-4900

Selvi, Ezhil V and William Grips, VK and Barshilia, Harish C (2013) Electrochemical behavior of superhard nanocomposite coatings of TiN/Si3N4 prepared by reactive DC unbalanced magnetron sputtering. Surface and Coatings Technology, 224 . pp. 42-48. ISSN 0257-8972

Senthil Kumar, P and Jayasankar, S and Satisha, Vishwanath and Sateesh, VL and Kamaleshaiah, MS and Dayananda, GN (2013) Development and wind tunnel evaluation of an SMA based trim tab actuator for a civil aircraft. SMART MATERIALS AND STRUCTURES, 22 (9).

Senthilkumar, P and Umapathy, M (2013) Use of load generated by SMA for its position control with neutral network estimator. Journal of Vibration and Control, 7 . pp. 1-12. ISSN 1077-5463

Shakthipriya, VS and Naidu, VPS (2013) Multi Sensor Image Fusion using Empirical Mode Decomposition. International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering . pp. 252-260. ISSN 2278 - 8875

Shaktivesh, S and Nair, NS and Sesha Kumar, ChV and Naik , NK (2013) Ballistic impact performance of composite targets. Materials and Design, 51 . ISSN 0261-3069

Shantha Kumar, N and Sudesh, K Kashyap and Naidu, VPS and Girija, G (2013) Integrated Enhanced and Synthetic Vision System for Transport Aircraft. Defence Science Journal, 63 (2). pp. 157-163. ISSN 0011-748X

Sharanappa, Sajjan V and Siva Kumar , K (2013) Effect of Aerofoil Thickness and Camber on the Flapping Aerofoil Propulsion. In: The 2nd International Conference on Recent Advances in Design, Development and Operation of Micro Air Vehicles - 2013, 21 - 23 November, 2013, Jawaharlal Nehru Technological University Hyderabad (JNTUH), India.

Sharanappa, Sajjan V and Siva Kumar , K (2013) Effect of Various Parameters on the Flapping Motion of an Aerofoil. Frontiers in aerospace Engineering, 2 (2). pp. 129-135. ISSN 2325-6796

Sharma, Megha and Thomas, Ann Nimmy and Chowdhury, P and Barshilia, Harish C (2013) Heat generation analysis and anode temperature measurement during the formation of nanoporous aluminium oxide. In: IUMRS 2013, 16 Dec 2013, IISc, Bangalore.

Shireesha , G and Manjunatha, C and Jain, Anjana and Radhakrishna, MC (2013) Preparation and characterization of Poly(vinylidenefluoride)-CdSiO3 nanocomposite thin films. In: Workshop on Advanced materials manufacturing management and thermal studies, 3 May 2013, Tumkur.

Shiv, Narayan and Latha, S and Jha , RM (2013) EM Analysis of Metamaterial based Radar Absorbing Structure (RAS) with Dual-resonant Characteristics. In: ICCES, 5 May 2013, Seattle, USA.

Shiv, Narayan and Nimisha, S and Jha , RM (2013) Analysis of Microstrip Antenna Loaded with High Impedance Ground Plane Frequency Selective Surface. In: AEMC 2013, Bhubaneswar.

Shivaram, BS and Nisanth, K and Jayashree, S and Poornima, Narayana (2013) Open source software based information services at CSIR-NAL. In: ICOASCR - 2013, 23-24 Aug 2013, Bangalore University, Bangalore.

Shobhavathy, MT (2013) CFD analysis to investigate the effect of rotor tip clearance on the performance of a 2:1 pressure ratio fan stage. In: National Propulsion Conference 2013, 21 Feb 2013, Indian Institute of Madras, Chennai.

Shobhavathy, MT and Premakara , Hanoca (2013) CFD analysis to understand the flow behaviour of a single stage transonic Axial flow compressor. In: Proceedings of ASME GTINDIA 2013 Conference , 5-6 December 2013, Bangalore.

Simimol, A and Aji, A and Chowdhury, P and Dhara, S and Barshilia, Harish C (2013) Enhanced defect emission in Co doped ZnO nanorods synthesized by electrochemical route. In: IUMRS 2013, 16 Dec 2013, IISc, Bangalore.

Simimol, A and Chowdhury, P and Ghosh, SK and Barshilia, Harish C (2013) Optimization of parameters for the growth of defect free ZnO nanorod arrays with intense UV emission capacity by electrochemcial route. Electrochimica Acta, 90 . pp. 514-523. ISSN 0013-4686

Simimol, A and Murali, K and Chowdhury, P and Barshilia, Harish C (2013) Co- doped ZnO nanostructures with magnetic properties by electrochemical route. In: NSEST 2013, 2013-08-23, IISc, Bangalore.

Singh, Hema and Sneha, HL and Jha , RM (2013) Mutual coupling effect in phased arrays: A review. International Journal of Antennas and Propagation, 2013 . pp. 1-24. ISSN 1687-5877.

Singh, Yogesh and Kataria, S and Barshilia, Harish C (2013) Different morphologies of zinc oxide nanostructures grown under similar deposition conditions during vapor-liquid-solid growth. Nanoscience and Nanotechnology letters, 5 (12). pp. 1224-1230. ISSN 1941-4900

Siva Kumar , K and Sajjan, Sharanappa V (2013) Three-dimensional Unsteady Flow over a Heaving Rectangular Wing. Frontiers in Aerospace Engineering, Volume (Issue ). pp. 199-206. ISSN 2325-6796

Srinivas, J and Prateesh Kumar, P and Sathiyamoorthy, K and Venu, G (2013) Development of automated test sequence for mach 3.5 propulsion test facility. In: International Symposium on Air Breathing Engines (ISABE-2013-1306), 9-13 Sep. 2013, Busan, Korea.

Srivastava, Meenu and Anandan, C and William Grips, VK (2013) Novel Ni-Mo-Co ternary alloy as a replacement for hard chrome. Applied Surface Science, 285 . pp. 167-174. ISSN 0042-207X

Srivastava, Meenu and Balaraju, JN and Ravisankar, B (2013) High Temperature Oxidation Resistant Modified NiCoCrAlY Coating. In: ASME 2013 Gas Turbine India Conference, 5-6 Dec 2013, NAL, Bengaluru.

Srivastava, Meenu and Suprita, GK and William Grips, VK (2013) Multifunctional electrodeposited Ni-mullite composite coating. In: National Symposium on Electrochemical Science & Technology (NSEST 2013), 23 Jul 2013, IISc, Bangalore.

Srivastava, Meenu and Tirlapur, Pradeep (2013) Synthesis and properties of electrodeposited oxide particle reinforced Ni composite coatings. In: Annual Seminar in Hindi ANSH-2013, 2013-05-22, NAL, Bangalore.

Sudesh, K Kashyap (2013) Fusion of Long Wave Infra Red and Electro Optical Images Using Fuzzy Logic Type 1 and Type 2. Technical Report. National Aerospace Laboratories, National Aerospace Laboratories. (Unpublished)

Sudesh, K Kashyap and Sanketh, Ailneni and Shantha Kumar, N (2013) INS/GPS Fusion for Navigation of Unmanned Aerial Vehicles. In: 9th International Conference on Intelligent Unmanned Systems, 25 Nov 2013, Jaipur.

Sudhakar, S and Chandan Kumar, A and Arivoli, D and Dodamani, Ravi and Venkatakrishnan, L (2013) Experimental studies of propeller induced flow over typical micro air vehicle - AIAA 2013-0060. In: 51st AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition , 07-10 Jan 2013, Grapevine (Dallas/Ft. Worth Region), Texas.

Sudhakar, S and Karthikeyan, N (2013) Effect of Leading edge tubercles on flow field over NACA-4415 airfoil at low Reynolds number. In: The 14th Asian Congress of Fluid Mechanics , 15 Oct 2013, Hanoi and Halong, Vietnam.

Sujata, M and Bikas C, Maji and Madangopal, Krishnan and Gouthama, - and Ranjit K, Ray (2013) Effect of Co Addition on the Microstructure, Martensitic Transformation and Shape Memory Behavior of Fe-Mn-Si Alloys. The Minerals, Metals & Materials Society and ASM International, 44A (172).

Sujata, M and Jagannathan, N and Raghavendra, K and Manjunatha, CM and Bhaumik, SK (2013) Fatigue Fracture of a Compressor Disc of an Aeroengine. Journal of Failure Analysis and Prevention . pp. 1-8.

Sujata, M and Madan, M and Raghavendra, K and Bhaumik, SK (2013) Fretting fatigue in aircraft components made of Ti-A1-V alloys. Procedia Engineering, 55 . pp. 481-486. ISSN 1877-7058

Suriyanarayanan, P and Venkatakrishnan, L and Jagadeesh, G (2013) Time Evolution of the Density Field of a Micro–Explosion Using Background Oriented Schlieren. In: International Symposium on shock waves, 14 Jul 2013, University of Wisconsin-Madison, USA.

Swathi, Nair and Bindu, Elias and Naidu, VPS (2013) Pixel Level Image Fusion using Fuzzylet Fusion Algorithm. International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering . pp. 261-269. ISSN 2278 - 8875

Swathi, Nair and Bindu, Elias and Naidu, VPS (2013) Pixel Level Image Fusion using Fuzzylet Fusion Algorithm. International Journal of Advanced Research in Electrical, Electronics and Instrumentation Engineering . pp. 261-269. ISSN 2278 - 8875

U

UdayaKumar, A and Stalin, M and Venkateswarlu, K (2013) Effect of CVD SiC seal coating on the mechanical properties of Cf /SiC composites generated through CVI. Surface and Coatings Technology . pp. 1-26. ISSN 0257-8972

V

Vaitheeswaran, SM and Gokul, M and Hemanth, K and Bharath, MK (2013) Intelligent Vision Based Unmanned Ground Vehicle Formation Control. In: International Conference on Intelligent Unmanned Systems , 25 Sept 2013, Jaipur, Rajasthan.

Vanarotti, M and Venkateswarlu, K and Kori, SA and Sridhar, BR and Padasalgi, SB (2013) Effect of Ni coating on SiC particles to synthesize Al based Metal Matrix Composites. International Journal of Science Research, 01 (4). pp. 405-409. ISSN 2319-7064

Veena, S and Pavithra , S and Lokesha, H and Narasimhan, SV and More, Neha V (2013) Virtual Sensor Based Feedback Active Noise Control For Neonates in NICU. In: C2SPCA 2013, 2013-10-10, Bangalore.

Veera Sesha Kumar, C and Jayaraman, M (2013) Full-scale Structural Testing of 500 kW Wind Turbine Blade. Project Report. National Aerospace Laboratories.

Veera Sesha Kumar, C and Jayaraman, M (2013) Mechanical Design of a 4.5 kW High Speed Alternator. Project Report. National Aerospace Laboratories.

Veera Sesha Kumar, C and Tijare, Vijay and Dileepkumar B, Alone and Janaki Rami Reddy , M and Jayaraman, M (2013) Bearing Failure Investigation of Turbomachinery Test Rig. In: ASME 2013 Gas Turbine India Conference, December 5-6, 2013, NAL, Bengaluru.

Venkat Iyengar, S and Sathiyamoorthy, K and Srinivas, J and Manjunath, P (2013) Drop size characteristics of forward angled injectors in subsonic cross flows. In: Proceedings of the ASME 2013 Gas Turbine India Conference (GTINDIA2013), 5-6 Dec 2013, Bangalore, Karnataka, India.

Venkat Iyengar, S and Sathiyamoorthy, K and Srinivas, J and Prateesh Kumar, P and Muthu Selvan, G and Muralidhara, HS and Manjunath, P (2013) Experimental Investigation of Spray Characteristics in Subsonic Crossflows. In: National Propulsion Conference, Feb 2013 , IIT, Chennai.

Venkat Iyengar, S and Sathiyamoorthy, K and Srinivas, J and Prateesh Kumar, P and Muthu Selvan, G and Muralidhara, HS and Manjunath, P (2013) Experimental investigation of spray characteristics in subsonic crossflows. In: National Propulsion Conference 2013, 22 Feb 2013, Indian Institute of Madras, Chennai.

Venkat Iyengar, S and Sathiyamoorthy, K and Srinivas, J and Sharma, A (2013) Penetration and drop size distributions of liquid jets in high subsonic crossflows. In: International Symposium on Air Breathing Engines - 21st (ISABE 2013-1301), 9-13 Sep. 2013, Busan, Korea.

Venkatakrishnan, L and Suriyanarayanan, P and Jagadeesh, G (2013) Density field visualization of a micro-explosion using background-oriented schlieren. Journal of Visualization, 16 (3). pp. 177-180. ISSN 1875-8975

Venkatesh, TN and Arshad Shameem , C (2013) Coupled simulations using Varsha – WRF: Massive data and computing requirements. In: International Conference on Computational and Data Intensive Science, 26 Aug 2013, CSIR-NAL, Bangalore.

Venkatesh, TN and Mathew, J (2013) Problem of clear air turbulence: Changing perspectives in the understanding of the phenomenon. Sadhana, 38 (Part 4). pp. 707-722. ISSN 0256-2499

Verma, SB and Manisankar, C and Akshara, P (2013) Study of Shock-Wave Boundary-Layer Interaction Control Using an Array of Steady Micro-Jet Actuators. In: NCWT-03, 2013-08-23, VSSC, Trivandrum.

Viji, M and Sathia Narayanan, A and Mathur, NB (2013) Aerodynamic performance evaluation of twinjet afterbody using flow through balance. In: National conference on wind tunnel testing, 2013-08-23, Thiruvananthapuram.

Vinay, CA and Bhaskar, Chakravarthy and Dutt, HNV (2013) CFD Analysis Of Engine Air Intake For A Pusher Type Light Transport Aircraft. In: International Conference on Computer Aided Engineering (ICAE-2013), 21 December 2013, IIT Madras.

Viswamurthy, SR and Siva, M and Ramachandra, HV (2013) Interlaminar Fracture Toughness Characterization of Unidirectional Glass Fiber Composite (S2/913 prepreg). Technical Report. CSIR-NAL, CSIR-NAL, Bangalore.

Viswamurthy , SR and Siva, M and Ramachandra, HV and Stanley , C Salem (2013) Interlaminar Fracture Toughness Characterization of Unidirectional Carbon Fiber Composite (AS4/914 prepreg). Technical Report. CSIR-NAL, CSIR-NAL, Bangalore.

Y

Yoganandan, G and Bharathidasan, T and Basu, Bharathibai J and Balaraju, JN (2013) Effect of ageing and FAS modification on the wettability of anodized Al alloy. In: NSEST 2013, 2013-08-23, IISc, Bangalore.

Yoganandan, G and Pradeep, Premakumar and Balaraju, JN (2013) Corrosion resistance performance of Zr based conversion coating developed on aerospace aluminum alloy. In: CORCON 2013, 2013-09-30, New Delhi.

This list was generated on Sun Sep 24 01:02:30 2017 IST.