Browse by Type
Jump to: Journal Article
Number of items: 73.
Amirthan, G and UdayaKumar, A and Balasubramanian, N (2011) Thermal conductivity studies on Si/SiC ceramic composites. Ceramics International, 37 . pp. 423-426. ISSN 0272-8842
Archana, Chaudhary and Barshilia, Harish C (2011) Nanometric multi-scale rough CuO/Cu(OH)2 superhydrophobic surfaces prepared by facile one step solution-immersion process: Transition to superhydrophilicity with oxygen plasma treatment. Journal of Physical Chemistry C, 115 (37). pp. 18213-18220.
Aruna, ST and Balaji, N and Rajam, KS (2011) Phase transformation and wear studies of plasma sprayed yttria stabilized zirconia coatings containing various mol% of yttria. Materials Characterization, 62 . pp. 697-705.
Aruna, ST and Deshpande, Parag A and Giridhar, Madras (2011) Photocatalytic Activity of Combustion Synthesized Nanocrystalline CeAIO3. Clean - soil, air, Water, 39 (3). pp. 259-264.
Aruna, ST and Deshpande, Parag A and Madras, Giridhar (2011) Photocatalytic Activity of Combustion Synthesized Nanocrystalline CeAlO3. CLEAN-SOIL AIR WATER, 39 (3). pp. 259-264. ISSN 1863-0650
Aruna, ST and Narayanaswamy, Balaji and Prakash, Badi shri (2011) Low temperature assisted chemical coprecipitation synthesis of 8YSZ plasma sprayable powder for solid oxide fuel cells. International Journal of Hydrogen energy, 36 . pp. 14963-14970.
Aruna, ST and Selvi, Ezhil V and William Grips, VK and Rajam, KS (2011) Corrosion- and wear-resistant properties of Ni-Al2O3 composite coatings containing various forms of alumina. Journal of Applied Electrochem, 41 (4). pp. 461-468. ISSN 0021-891X
Aruna, ST and Srikanth, PVK and Jamil, M Hamad and Latha, S and Rajam, KS (2011) Optimization of the Properties of Electrodeposited Ni-YSZ Composites Using Taguchi Method and Regression Analysis. Portugaliae Electrochmical Acta, 29 (1). pp. 23-37. ISSN 1647-1571
Barshilia, Harish C and Prashant, Kumar and Rajam, KS and Biswas, A (2011) Structure and optical properties of Ag-Al2O3 nanocomposite solar selective coatings prepared using unbalanced magnetron sputtering. Sol. Energy Mater. Sol. Cells, 95 . pp. 1707-1715. ISSN 0927-0248
Barshilia, Harish C and Rajam, KS (2011) Sputter deposited Nanometric multi-scale rough Cd-CdO superhydrophobic thin films. Nanoscience and Nanotechnology letters, 3 (3). pp. 300-305. ISSN 1941-4900
Barshilia, Harish C and Selvakumar, N and Pillai, Nisha and Devi L, Mayura and Rajam, KS (2011) Wettability of ZnO: A comparison of reactively sputtered; thermally oxidized and vacuum annealed coatings. Applied Surface Science, 257 (9). pp. 4410-4417. ISSN 0169-4332
Basu, Bharathibai J and Manasa, J (2011) Reversible switching of nanostructured cobalt hydroxide films from superhydrophobic to superhydrophilic state. Applied Physics A-Material Science Process, 103 (2). pp. 343-348. ISSN 0947-8396
Bharathibai, Basu J and Chakradhar, RPS and Lakshmi, RV (2011) Effect of particle size and dopant concentration on photophysical properties of Eu3+-doped rare earth oxysulphide phosphor coatings. Spectrochimica Acta Part A , 78 . pp. 783-787.
Bharathibai, Basu J and Dinesh Kumar, V (2011) Fabrication of Superhydrophobic Nanocomposite Coatings Using Polytetrafluoroethylene and Silica Nanoparticles. International Scholarly Reserch Network ISRN Nanotechnology, 2011 . pp. 1-6.
Bharathibai, Basu J and Manasa, J (2011) Effect of deposition parameters on the wettability and microstructure of superhydrophobic films with hierarchical micro–nano structures. Journal of Colloid and Interface Science, 368 . pp. 655-662.
Chakradhar, RPS and Dinesh Kumar, V and Rao, JL and Basu, Bharathibai J (2011) Fabrication of superhydrophobic surfaces based on ZnO–PDMS nanocomposite coatings and study of its wetting behaviour. Applied Surface Science, 257 (20). pp. 8569-8575. ISSN 0042-207X
Chandrakala, and Shekar R, Indu and Kumar MN, Satheesh and Siddaramaiah, and Yaakob, Z and Rao, PM (2011) Studies on the composites produced from co-weaved poly ether ether ketone and glass fiber fabric. Journal of Composite Materials, 45 (7). pp. 741-749. ISSN 0021-9983
Chattopadhyay, Lalitha (2011) Analytical solution for bending stress intensity factor from Reissner's plate theory. Engineering, 3 (5). pp. 517-524.
Chattopadhyay, Lalitha and Sridhara Murthy, S (2011) Analytical and finite element modeling simulation of buckling and postbuckling of delaminated orthotropic plates. International Journal of Modeling, Simulation and Scientific Computing, 2 (1). pp. 97-104.
Chetan S, Jarali and Raja, S and Kiefer, Bjoern (2011) Modeling the effective properties and themomechanical behavior or SMA-SMP multifunctional composite lamintes. Polymer Composites, 32 (6). pp. 910-927.
Chowdhury, P and Raghuvaran, K and Krishnan, M and Barshilia, Harish C and Rajam, KS (2011) Effect of process parameters on growth rate and diameter of nano-porous alumina templates. Bulletin of Materials Science, 34 (2). pp. 1-5. ISSN 0250-4707
Chowdhury, P and Sellarajan, Boominatha and Krishnan, M and Raghuvaran, K and Barshilia, Harish C and Rajam, KS (2011) In situ electrochemical thinning of barrier oxide layer of porous anodic alumina template. Advanced Science Letters, 5 (1). pp. 253-257. ISSN 1936-6612
Deepthi, B and Barshilia, Harish C and Rajam, K S and Manohar, S Konchady and Devdas, M Pai and Jagannathan, Sankar (2011) Structural, mechanical and tribological investigations of sputter deposited CrN–WS2 nanocomposite solid lubricant coatings. Tribology International, 44 . pp. 1844-1851.
Guruprasad, R and Khaiser Nikam, KN and Marimuthu, P and Mudkavi, Vidyadhar Y (2011) IMPACT OF INTERNET ON SCHOLARLY COMMUNICATIONS: A SURVEY OF AEROSPACE SCIENTISTS AND ENGINEERS IN BANGALORE. Information Studies, 17 (2). pp. 65-87. ISSN Print ISSN : 0971-6726. Online ISSN : 0976-1934.
Guruprasad, R and Nikam, Khaiser and Marimuthu, P (2011) A Cross-Association Analysis of Scientific Designations (Grades) with the Extent of Use of Electronic Information Resources and the Purpose of Use of the Internet Amongst the Indian Aerospace Scientists and Engineers of Bangalore. Journal of Aerospace Sciences and Technology, 63 (3). pp. 243-258. ISSN 0972-950X
Jayasankar, S and Senthil Kumar, P and Varghese, B and Ramanaiah, B (2011) Smart Aerodynamic Surface for a Typical Military Aircraft Using Shape Memory Elements. Journal of Aircraft, 48 (6). pp. 1968-1978. ISSN 0021-8669
Jayasankar, S and Senthil Kumar, P and Varughese, Byji and Ramanaiah, B and Satisha, Vishwanath and Ramachandra, HV and Dayananda, GN (2011) Smart Aerodynamic Surface for a Typical Military Aircraft Using Shape Memory Elements. Journal of Aircraft, 48 (6). pp. 1968-1977. ISSN 0021-8669
Jyotana Kiran, Mathad and Rao, RMVGK (2011) Studies on Highly Conducting Polypyrrole/Fe3O4 Nanocomposites. Polymer Composites .
Kamali, C and Pashilkar, AA (2011) Evaluation of Recursive Least Squares algorithm for parameter estimation in aircraft real time applications. Aerospace Science and Technology, 15 (3). pp. 165-174. ISSN 1270-9638
Karthikeyan, K and Ramachandra, S and Vizhian, Paul S and Chandra, Satish (2011) Signal processing, wavelets and high-speed image interpretation of bird impact. Defence Science Journal, 61 (1). pp. 62-71. ISSN 0011-748X
Karthikeyan, N and Venkatakrishnan, L (2011) New approaches for analysis of jet noise data. Journal of Aerospace Sciences and Technology, 63 (1). pp. 89-106. ISSN 0972-950X
Khirwadkar, SS and Singh, KP and Patil, Y and Khan, MS and Buch, JJU and Patel, Alpesh and Tripathi, S and Jaman, PM and Rangaraj, L and Divakar, C (2011) Fabrication and characterization of tungsten and graphite based PFC for divertor target elements of ITER like tokamak application. Fusion Engineering and Design, 86 . pp. 1736-1740. ISSN 0920-3796
Kidambi, R (2011) Frequency and damping of non-axisymmetric surface oscillations of a viscous cylindrical liquid bridge. Journal of fluid Mechanics, 681 . pp. 597-621.
Kumar, GV and Rao, KM and Kumar, JS and Raja, S (2011) Selective modal space control approach for smart composite cylindrical shell structure. ARPN Journal of Engineering and Applied Sciences, 6 (3). pp. 67-74. ISSN 1819-6608
Kumar P, Arun and Verma, SB and Elangovan, S (2011) Study of jets from rectangular nozzles with square grooves. Aeronautical Journal, 115 (1165). pp. 187-196. ISSN 0001-9240
Mahendra, S Kavale and Mahadik, D B and Parale, V G and Wagh, P B and Gupta, Satish C and Rao, A Venkateswara and Barshilia, Harish C (2011) Optically transparent, superhydrophobic methyltrimethoxysilane based silica coatings without silylating reagent. Applied Surface Science, 258 (1). pp. 158-162. ISSN 0042-207X
Majeed, M and Kar, IN (2011) Multi sensor data fusion based approach for the calibration of airdata systems. Aeronautical Journal, 115 (1164). pp. 113-122. ISSN 0001-9240
Manjunatha, CM and Jagannathan, N and Padmalatha, K and Kinloch, AJ and Taylor, AC (2011) Improved variable-amplitude fatigue behavior of a glass-fiber-reinforced hybrid-toughened epoxy composite. Journal of Reinforced Plastics and Composites, 30 (21). pp. 1783-1793. ISSN 0731-6844
Meenu, Srivastava and Bharathibai, Basu J and Rajam, KS (2011) Improving the Hydrophobicity of ZnO by PTFE Incorporation. Journal of Nanotechnology, 2011 (392754). pp. 1-6.
Meenu, Srivastava and William Grips, VK (2011) Influence of Zirconia Incorporation on the Mechanical and Chemical Properties of Ni-Co Alloys. American Journal of Materials Science, 1 (2). pp. 113-122.
Meenu , Srivastava and Bharathibai, Basu J and Rajam, KS (2011) Improving the Hydrophobicity of ZnO by PTFE Incorporation. Journal of Nanotechnology, 2011 . pp. 1-6.
Mnajunatha, CM and Jagannathan, N and Padmalatha, K and Kinloch, AJ and Taylor, AC (2011) The Effect of Micron-Rubber and Nano-Silica Particles on the Fatigue Crack Growth Behavior of an Epoxy Polymer. International Journal of Nanoscience, 10 (4&5). pp. 1095-1099. ISSN 0219-581X
Mukherjee, Somenath and Manju, S (2011) An improved parametric formulation for the variationally correct distortion immune three-noded bar element. Structural Engineering and Mechanics . ISSN 1225-4568
Mukherjee, Somenath and Manju, S (2011) An improved parametric formulation for the variationlly correct distortion immune three-noded bar element. Structural Engineering and Mechanics, 38 (3). 000-000.
Naidu, VPS (2011) Image Fusion Technique using Multi-resolution Singular Value Decomposition. Defence Science Journal, 61 (5). pp. 479-484. ISSN 0011-748X
Narasimhan, SV and Veena, S (2011) New unbiased adaptive IIR filter: it’s robust and variable step-size versions and application to active noise control. Signal Image and Video Processing .
Rajinikanth, V and Venkateswarlu, K and Sen, Mani Kuntal and Das, M and Alhajeri, SN and Langdon, TG (2011) Influence of scandium on an Al–2% Si alloy processed by high-pressure torsion. Materials Science and Engineering , 528 . pp. 1702-1706.
Ramaiah, KV and Saikrishna, CN and Ranganath, VR and Buravalla, V and Bhaumik, SK (2011) Fracture of thermally activated NiTi shape memory alloy wires. Materials Science and Engineering A, 528 . pp. 5502-5510. ISSN 0921-5093
Ramamohan, TR and Shivakumara, IS and Madhukar, K (2011) The dynamics and rheology of a dilute suspension of periodically forced neutrally buoyant spherical particles in a quiescent Newtonian fluid at low Reynolds numbers. Fluid Dynamics Research, 43 (4). 045502. ISSN 0169-5983
Rangachari, Kidambi (2011) Damping of surface waves in a brimful circular cylinder with a contaminated free surface. Fluid Dynamics Research, 43 . ISSN 0169-5983
Saijal , KK and Ganguli, Ranjan and Viswamurthy , SR (2011) Optimization of Helicopter Rotor Using Polynomial and Neural Network Metamodels. Journal of Aircraft, 48 (2). pp. 553-566. ISSN 0021-8669
Sandeep, P and Shreyamsha Kumar, B K and Narasimhan, SV (2011) 2D-spectral estimation based on DCT and modified magnitude group delay. SIViP .
Sathish, S and Geetha, M and Aruna, ST (2011) Studies on plasma sprayed bi-layered ceramic coating on bio-medical Ti-13Nb-13Zr alloy. Ceramic Intternational, 37 (4). pp. 1333-1339.
Sathish, S and Geetha, M and Aruna, ST and Balaji, N and Rajam, KS and Asokamani, R (2011) Studies on plasma sprayed bu-layered ceramic coating on bio-medical Ti-13Nb-13Zr alloy. Ceramic International, 37 . pp. 1333-1339.
Sathish, S and Geethaa, M and Aruna, ST and Balaji, N and Rajam, KS and Asokamani, R (2011) Sliding wear behavior of plasma sprayed nanoceramic coatings for biomedical applications. Wear, 271 (5-6). pp. 934-941. ISSN 0043-1648
Shivamurti, M and Narasimhan, SV (2011) A Dual Tree Complex Discrete Cosine Harmonic Wavelet Transform (ADCHWT) and Its Application to Signal/Image Denoising. Journal of Signal and Information Processing (2). pp. 218-226. ISSN 2159-4481
Shri Prakash , B and Balaji, N and William Grips, VK and Aruna, ST (2011) Effect of Feedstock Powders on the Microstructural and Electrical Characteristics of 8 mol% Yttria-Stabilized Zirconia Plasma-Sprayed Coatings. Journal of Thermal Spray Technology, 21 (6). pp. 1300-1308. ISSN 1059 9630
Singh, AK and Liermann, Hanns-Peter (2011) Strength and elasticity of niobium under high pressure. Journal of Applied Physics, 109 (113539). pp. 1-9. ISSN 0021-8979
Singh, KP and Pandya, SP and Khirwadkar, SS and Patel, Alpesh and Patil, Y and Buch, JJU and Khan, MS and Tripathi, S and Pandya, S and Govindarajan, J and Jaman, PM and Rathore, Devandra and Rangaraj, L and Divakar, C (2011) Pre-qualification of brazed plasma facing components of divertor target elements for ITER like tokamak application. Fusion Engineering and Design, 86 . pp. 1741-1744. ISSN 0920-3796
Singh, Manish K and Dhanalakshmi, K and Mathur, JS (2011) Investigation of two dimensional flow past multi element airfoils for general transport aircraft. International Journal of Numerical Methods for Heat & Fluid Flow, 21 (8). 1026 -1049. ISSN 0961-5539
Singha, Sintu and Sinhamahapatra, KP (2011) Control of vortex shedding from a circular cylinder using imposed transverse magnetic field. International Journal of Numerical Methods for Heat & Fluid Flow, 21 (1). pp. 32-45. ISSN 0961-5539
Sinha, RP and Jarali, Chetan S and Raja, S (2011) Modelling the thermomechanical behaviour of shape memory polymer materials. Indian Journal of Engineering and Materials Sciences, 18 . pp. 15-23. ISSN 0971-4588
Siva Kumar , K and Sharanappa, Sajjan V (2011) Unsteady Compressible Flow over Heaving Bodies Using an Implicit RANS Solver. Applied Mechanics and Materials, Vols. . pp. 4589-4597. ISSN ISSN: 1662-7482
Siva Kumar , K and Sharanappa, Sajjan V (2011) Unsteady Flow past a Combined Pitching and Plunging Aerofoil using an Implicit RANS Solver. Applied Mechanics and Materials, Vols. . pp. 3481-3488. ISSN 1662-7482
Srikanth, L and Rao, RMVGK (2011) Concurrent studies on Braided and Filament wound carbon fibre composites - a comparative appraisal. Concurrent studies on braided and filament wound carbon fibre composites - a comparative appraisal, 30 (16). pp. 1359-1365.
Suryanarayana, GK (2011) Effect of flare angle and natural ventilation on the aerodynamic characteristics of a typical re-entry body at subsonic and transonic mach numbers. Journal of Aerospace Sciences and Technology, 63 (4). pp. 1-7. ISSN 0972-950X
UdayaKumar, A and Balasubramanian, M and Gopala, HB and Sampathkumaran, P and Seetharamu, S and Babu, Ramesh and Sathiyamoorthy, D and Reddy, GR (2011) Influence of the type of interface on the tribological characteristics of ICVI generated SiCf/SiC composites. Wear, 271 . pp. 859-865. ISSN 0043-1648
UdayaKumar, A and Ganesh, A (2011) Effect of intermediate heat treatment on mechanical properties of SiCf/SiC composites with BN interphase prepared by ICVI. Journal of the European Ceramic Society, 31 (6). pp. 1145-1153. ISSN 0955-2219
UdayaKumar, A and Raole, PM and Balasubramanian, M (2011) Synthesis of tailored 2D SiCf/SiC ceramic matrix composites with BN/C interphase through ICVI. Journal of Nuclear Materials, 417 (1). pp. 363-366. ISSN 0022-3115
Venkata Ramaiah, K and Saikrishna, CN and Bhaumik, SK and Bhagyaraj, J and Gouthama, - (2011) TEM Studies on the Microstructural Changes during Thermomechanical Cycling of NiTi Shape Memory Alloy Wire. Materials Science Forum, 702-70 . pp. 904-907.
Venkatakrishnan, L and Wiley, Alex and Kumar, Rajan and Alvi, Farukh (2011) Density field measurements of a supersonic impinging jet with microjet control (AIAA -53420-753). AIAA Journal, 49 (2). pp. 432-438. ISSN 0001-1452
Verma, SB and Stark, R and Genin, C and Haidn, O (2011) Cold gas dual-bell tests in high-altitude simulation chamber. Shock Waves, 21 . pp. 131-140.
Verma, SB and Viji, M (2011) Freestream effects on base pressure development of an annular plug nozzle. Shock Waves, 21 (2). pp. 163-171.