Browse by Type
Number of items: 62.
Amirthan, G and UdayaKumar, A and Prasad, VVB and Balasubramanian, M (2010) Solid particle erosion studies on biomorphic Si/SiC ceramic composites. Wear, 268 . pp. 145-152. ISSN 0043-1648
Aruna, ST and Kini, NS and Shetty, Satish and Rajam, KS (2010) Synthesis of nanocrystalline CeAlO3 by solution-combustion route. Materials Chemistry and Physics, 119 . pp. 485-489.
Aruna, ST and William Grips, VK and Rajam, KS (2010) Synthesis and characterization of Ni–Al2O3 composite coatings containing different forms of alumina. Journal of Applied Electrochemistry, 40 . pp. 2161-2169. ISSN 1572-8838
Balaraju, JN and Kalavati, - and Rajam, KS (2010) Electroless ternary Ni-W-P alloys containing micron size Al2O3 particles. Surface and Coatings Technology, 205 . pp. 575-581. ISSN 0257-8972
Barshilia, Harish C and Moumita, Ghosh and Shashidhara, Acharya and Raja, Ramakrishna and Rajam, KS (2010) Deposition and characterization of TiAlSiN nanocomposite coatings prepared by reactive pulsed direct current unbalanced magnetron sputtering. Applied Surface Science, 256 (21). pp. 6420-6426. ISSN 0042-207X
Barshilia, Harish C and Sai Tej, K.R. and Mayura Devi, L and Rajam, KS (2010) Nanometric multiscale rough Zn-ZnO superhydrophobic thin films: Self-diffusion of zinc and effect of UV irradiation. Journal of Applied Physics, 108 (074315). ISSN 0021-8979
Barshilia, Harish C and Shashidhara, Acharya and Moumita, Ghosh and Suresh, T.N. and Rajam, KS and Konchady, Manohar and Pai, Devdas and Sankar, Jagannathan (2010) Performance evaluation of TiAlCrYN nanocomposite coatings deposited using four-cathode reactive unbalanced pulsed direct current magnetron sputtering system. Vacuum, 85 . pp. 411-420. ISSN 0042-207X
Basu, BK and Bhagyalakshmi, K (2010) Forecast of the tract and intensity of the tropical cyclone AILA over the Bay of Bengal by the global spectral atmospheric model VARSHA. Current Science, 99 (6). pp. 765-774. ISSN 0011-3891
Basu, Bharathibai J and Hariprakash, V and Aruna, ST and Lakshmi, RV and Manasa, J and Shruthi, BS (2010) Effect of microstructure and surface roughness on the wettability of superhydrophobic sol-gel nanocomposite coatings. Journal of Sol-Gel Sciene and Technology, 56 (3). pp. 278-286. ISSN 0928-0707
Basu, Bharathibai J and Hariprakash, V and Aruna, ST and Lakshmi, RV and Manasa, J and Shruthi, BS (2010) Effect of microstructure and surface roughness on the wettability of superhydrophobic sol–gel nanocomposite coatings. Journal of Sol-Gel Sciene and Technology, 56 . pp. 278-286. ISSN 0928-0707
Basumallick, Nandini and Narasimhan, SV (2010) A discrete cosine adaptive harmonic wavelet packet and its application to signal compression. Journal of Signal and Information Processing, 1 (1). pp. 63-76. ISSN 2159-4481
Bhaumik, SK (2010) Root cause analysis in engineering failures. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 297-299. ISSN 0019-493X
Chowdhury, P and Barshilia, Harish C and Rajam, KS and Mishra, PK and Prajapat, C.L. and Sridhara Rao, DV (2010) Role of oxygen impurity in growth and magnetic properties of Ni83Fe17 permalloy thin films. Journal of Magnetism and Magnetic Materials, 322 (21). pp. 3266-3270. ISSN 0304-8853
Deepthi, B and Barshilia, Harish C and Rajam, KS and Konchady, Manohar and Pai, Devdas and Sankar, Jagannathan (2010) Mechanical and tribological properties of sputter deposited nanostructured Cr-WS2 solid lubricant coatings. Surface and Coatings Technology, 205 . pp. 1937-1946. ISSN 0257-8972
Deepthi, B and Barshilia, Harish C and Rajam, KS and Konchady, Manohar and Pai, Devdas and Sankar , Jagannathan and Kvit, Alexander (2010) Structure, morphology and chemical composition of sputter deposited nanostructured Cr-WS2 solid lubricant coatings. Surface and Coatings Technology, 205 . pp. 565-574. ISSN 0257-8972
Deshpande, SM and Ramesh, V and Malagi, Keshav and Arora, Konark (2010) Least squares kinetic upwind mesh-free method. Defence Science Journal, 60 (6). pp. 583-597. ISSN 0011-748X
Dutta, Soma and Shubha, V and Ramesh, TG (2010) Effect of pressure and temperature on thermopower of Bix2013;Sb alloys. Physica B: Condensed Matter, 405 (5). pp. 1239-1243.
George, S and Goravar, S and Mishra, D and Shyamsunder, MT and Sharma, P and Padmasree, GK and Sanjeev Kumar, S and Bremond, P and Mukherjee, K (2010) Stress monitoring and analysis using lock-in thermography. Insight - Non-Destructive Testing and Condition Monitoring, 52 (9). 470-474(5). ISSN 1354-2575
Guruprasad, R and Khaiser Nikam, KN (2010) Patterns of Use of Aerospace Engineering e-Technical Reports by the Indian Aerospace Scientists and Engineers in Bangalore: A Research Study. Journal of Aerospace Sciences and Technology, 62 (4). pp. 261-272. ISSN 0972-950X
Guruprasad, R and Khaiser Nikam, KN and Mudkavi, Vidyadhar Y (2010) Scholarly Electronic Communication Amongst the Aerospace Engineering Community and the Impact of Electronic Journals: A Review Study". SRELS Journal / "Scholarly Electronic Communication Amongst the Aerospace Engineering Community and the Impact of Electronic Journals: A Review Study, Vol. 4 (No.4). pp. 395-425.
Guruprasad, R and Nikam, Khaiser (2010) E-Journals and their Usage Patterns Amongst the Indian Aerospace Scientists and Engineers in Bengaluru. E-Journals and their Usage Patterns Amongst the Indian Aerospace Scientists and Engineers in Bengaluru, 30 (6). pp. 31-38. ISSN Print 0971-4383
Guruprasad, R and Nikam, Khaiser (2010) Effect of reading e-journals on the research of aerospace scientists and engineers. Annals of Library and Information Studies / Effect of reading e-journals on the research of aerospace scientists and engineers, 57 (4). pp. 373-379. ISSN 0975-2404 (Online), 0972-5423 (Print)
Jarali, Chetan S and Raja, S and Upadhya, AR (2010) Constitutive modeling of SMA SMP multifunctional high performance smart adaptive shape memory composite. Smart Materials and Structures, 19 (10). ISSN 0964-1726
Kamalakannan, GM and Gupta, Amit Kumar (2010) An improved technique and its implementation for control of high power heaters in large autoclaves and similar plants. Journal of Instrument Society of India, 40 (2).
Kamath, GM and Sundaram, Ramesh and Gupta, Nitesh and Rao, Subba M (2010) Damage studies in composite structures for structural health monitoring using strain sensors. Structural Health Monitoring, 9 (6). pp. 497-512. ISSN 14759217
Karthikeyan, N and Venkatakrishnan, L (2010) Application of photogrammetry to surface flow visualization. Experiments in Fluids, 49 (9). pp. 1-10. ISSN 0723-4864
Krishna, KG and Singh, Nidhi and Venkateswarlu, K and Kumar, KC Hari (2010) Tensile Behavior of Ultrafine-Grained Al-4Zn-2Mg Alloy Produced by Cryorolling. Journal of Materials Engineering and Performance, 20 (9). pp. 1569-1574. ISSN 1059-9495
Kumar, AS and Kumar, BR and Datta, GL and Ranganath, VR (2010) Effect of microstructure and grain size on the fracture toughness of a micro-alloyed steel. Materials Science and Engineering A, 527 (4-5). pp. 954-960. ISSN 0921-5093
Kumaresan, G and Saraf, Amitabh (2010) Flight calibration of flow angularity sensors on Tejas using advanced parameter estimation techniques. International Journal of Aerospace Innovations, 2 (1 - 2 ). pp. 57-68. ISSN 1757-2258
Liermann, HP and Jain, Anjana and Singh, AK and Saxena, SK (2010) Compression of silver in a diamond anvil cell: Pressure dependences of strength and grain size from X-ray diffraction data. Journal of Physics and Chemistry of Solids, 71 . pp. 1088-1093. ISSN 0022-3697
Majeed, M and Kar, IN (2010) Calibration of air data systems using extended kalman filtering technique. International Journal of Aerospace Innovations, 2 (1-2). pp. 133-146. ISSN 1757-2258
Majumdar, Sekhar and Rajani, BN and Kulkarni, DS and Subrahmanya, MB (2010) Numerical simulation of incompressible turbulent flow using linear eddy viscosity-based turbulence models. Defence Science Journal, 60 (6). pp. 614-627. ISSN 0011-748X
Mandal, AC and Venkatakrishnan, L and Dey, J (2010) A study on boundary-layer transition induced by free-stream turbulence. Journal of Fluid Mechanics, 660 . pp. 114-146. ISSN 0022-1120
Nachiappan, C and Rangaraj, L and Divakar, V (2010) Synthesis and Densification of Monolithic ZrC by reactive Hot pressing. Journal of American Ceramic Society, 93 (5). pp. 1341-1346.
Naidu, VPS (2010) Discrete cosine transform-based image fusion. Defence Science Journal, 60 (1). pp. 48-54.
Naidu, VPS (2010) FUSION ARCHITECTURES FOR 3D TARGET TRACKING USING IRST AND RADAR MEASUREMENTS. JOURNAL OF AEROSPACE SCIENCES & TECHNOLOGIES, VOL.62 (No.3). pp. 184-195.
Naidu, VPS (2010) Fusion architecture for 3D target tracking using IRST and radar measurements. Journal of Aerospace Sciences and Technology, 62 (3). pp. 183-195. ISSN 0972-950X
Rangaraj, L and Divakar, C and Jayaram, V (2010) Reactive hot pressing of ZrB2–ZrCx ultra-high temperature ceramic composites with the addition of SiC particulate. Journal of the European Ceramic Society, 30 . pp. 3263-3266. ISSN 0955-2219
Rangaraj, L and Divakar, C and Vikram, Jayaram (2010) Fabrication and mechanisms of densification of ZrB2-based ultra high temperature ceramics by reactive hot pressing. Journal of the European Ceramic Society, 30 (1). pp. 129-138. ISSN 0955-2219
Rathod, VT and Mahapatra, D Roy and Jain, Anjana and Gayathri, A (2010) Characterization of large-area PVDF thin film for electro-mechanical and ultrasonic sensing applications. Sensors and Actuators A: Physical , 163 . pp. 164-171. ISSN 0924-4247
Ravishankar, S and Dutt, HNV and Gurumoorthy, B (2010) Automated inspection of aircraft parts using a modified ICP algorithm , H. N. V. Dutt and B. International Journal of Manufacturing Technology, 46 (1-4). pp. 227-236.
Selvakumar, N and Barshilia, Harish C and Rajam, KS (2010) Effect of substrate roughness on the apparent surface free energy of sputter deposited superhydrophobic polytetrafluoroethylene coatings: A comparison of experimental data with different theoretical models. Journal of Applied Physics, 108 . 013505.
Selvakumar, N and Barshilia, Harish C and Rajam, KS (2010) Structure, optical properties and thermal stability of pulsed sputter deposited high temperature HfOx/Mo/HfO2 solar selective absorbers. Solar Energy Materials and Solar Cells, 94 (8). pp. 1412-1420.
Selvakumar, N and Barshilia, Harish C and Rajam, KS and Biswas, A (2010) Structure, optical properties and thermal stability of pulsed sputter deposited high temperature HfOx/Mo/HfO2 solar selective absorbers. Sol. Energy Mater. Sol. Cells, 94 (8). pp. 1412-1420. ISSN 0927-0248
Singh, KP and Mathur, JS and Ashok, V and Chakraborty, Debasis (2010) Computational fluid dynamics in aerospace industry in India. Defence Science Journal, 60 (6). pp. 639-652. ISSN 0011-748X
Singha, Sintu and Sinhamahapatra, KP (2010) Flow past a circular cylinder between parallel walls at low Reynolds numbers. Ocean Engineering, 37 . pp. 757-769. ISSN 0029-8018
Sinha, UN (2010) On the predictive behaviour of the Indian monsoon in June 2009. Current Science, 98 (2). pp. 134-135. ISSN 0011-3891
Srivastava, Meenu and Balaraju, JN and Rajam, KS (2010) Improvement in the properties of nickel by nano-Cr2O3 incorporation. Surface and Coatings Technology, 205 . pp. 66-75. ISSN 0257-8972
Srivastava, Meenu and William Grips, VK and Rajam, KS (2010) Electrodeposition of Ni–Co composites containing nano-CeO2 and their structure, properties. Applied Surface Science, 257 (3). pp. 717-722. ISSN 0042-207X
Srivastava, Meenu and William Grips, VK and Rajam, KS (2010) Influence of Cobalt on Manganese incorporation in Ni-Co coatings. J Appl Electrochem, 40 . pp. 777-782. ISSN 1572-8838
Sudagar, Jothi and Venkateswarlu, K and Lian, Jainshe (2010) Dry sliding wear properties of a 7075-T6 aluminum alloy coated with Ni-P (h) in different pretreatment conditions. Journal of Materials Engineering and Performance, 19 (6). pp. 810-818. ISSN 1059-9495
Sujata, M and Madan, M and Raghavendra, K and Venkataswamy, MA and Bhaumik, SK (2010) Microstructural study: an aid to determination of failure mechanism in nickel base superalloy blades. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 681-685. ISSN 0019-493X
TADASHIGE , IKEDA, and TETSUHIKO , UEDA and Raja, SAMIKKANNU (2010) Deformation of a Beam with Partially Debonded Piezoelectric Actuators. Journal of Intelligent Material Systems and Structures . pp. 453-468.
Thulasi Durai, D and Viswamurthy , SR and Balasubramani, S and Rohit, C and Dayananda, GN (2010) Grid based construction of a composite micro air vehicle airframe. Journal of Aerospace Sciences and Technologies, 62 (2). pp. 132-140. ISSN 1735-2134
Vaitheeswaran, SM and Venkatanarayana, KG and Kanth, B Sashi (2010) Vector field guidance for path following of MAVs in three dimensions for variable altitude maneuvers. International Journal of Micro Air Vehicles, 2 (4). pp. 255-265. ISSN 1756-8293
Venkatesh, TN (2010) A numerical study of the role of vertical structure of vorticity during tropical cyclone genesis. Fluid Dynamics Research, 42 (045506). ISSN 0169-5983
Venkateswarlu, K and Rajinikanth, V and Ajoy Kumar, Ray and Cheng, XU (2010) The characteristics of aluminum–scandium alloys processed by ECAP. Materials Science and Engineering A, 527 . pp. 1448-1452.
Venkateswarlu, K and Rajinikanth, V and Ray, AK and Xu, Cheng (2010) Effect of a scandium addition on an Al-2% Si alloy processed by ECAP. Reviews on Advanced Materials Science, 25 . pp. 99-106. ISSN 1605-8127
Venkateswarlu, K and Rajinikanth, V and Sen, Mani Kuntal and Alhajeri, SN and Langdon, TG (2010) Application of High-Pressure Torsion to Al-Si Alloys with and without Scandium Additions. Materials Science Forum, 667 - . pp. 743-748.
Venkateswarlu, K and Suman , Saurabh and Rajinikanth, V and Ranjan Kumar, Sahu and Ajoy Kumar, Ray (2010) Synthesis of TiN Reinforced Aluminium Metal Matrix Composites Through Microwave Sintering. Material Engineering and Performance, 19 . pp. 231-236. ISSN 1059-9495
Verma, SB and Haidn, O (2010) Flow characteristics of overexpanded rocket nozzles. International Journal of Aerospace Innovations, 2 (4). pp. 259-277. ISSN 1757-2258
Verma, SB and Stark, R and Nuerenberger-Genin, C and Hakin, O (2010) Cold-gas experiments to study the flow separation characteristics of a dual-bell nozzle during its transition modes. Shock Waves, 20 . pp. 191-203.