Browse by Type
Number of items: 54.
Anandan, C and Rajam, KS (2008) Microraman study of the effect of oxide layer on the nitriding of T1-6AL-4V. Applied Surface Science, 254 . pp. 2783-2789.
Aruna, ST and Mukasyan, AS (2008) Combustion synthesis and nanomaterials. Current Opinion in Solid State and Materials Science, 12 . pp. 44-50. ISSN 1359-0286
Aruna, ST and Rajam, KS (2008) A study on the electrophoretic deposition of 8YSZ coating using mixture of acetone and ethanol solvents. Materials Chemistry and Physics, 111 (1). pp. 131-136. ISSN 0254-0584
Balaraju, JN and Rajam, KS (2008) Preparation and characterization of autocatalytic low phosphorus nickel coatings containing submicron silicon nitride particles. Journal of Alloys and Compounds, 459 (1-2). pp. 311-319. ISSN 0925-8388
Barshilia, Harish C and Deepthi, B and Rajam, KS (2008) Growth and characterization of aluminum nitride coatings prepared by pulsed-direct current reactive unbalanced magnetron sputtering. Thin solid films, 516 (12). pp. 4168-4174. ISSN 0040-6090
Barshilia, Harish C and Deepthi, B and Rajam, KS (2008) Stabilization of tetragonal and cubic phases of ZrO2 in pulsed sputter deposited ZrO2/Al2O3 and ZrO2/Y2O3 nanolayered thin films. Journal of Applied Physics, 104 (113532). ISSN 0021-8979
Barshilia, Harish C and Deepthi, B and Rajam, KS and Kanwal Preet, Bhatti and Chaudhary, Sujeet (2008) Structure and properties of reactive direct current magnetron sputtered niobium aluminum nitride coatings. Journal of Materials Research, 23 (5). pp. 1258-1268. ISSN 0884-2914
Barshilia, Harish C and Rajam, KS (2008) Growth and characterization of chromium oxide coatings prepared by pulsed-direct current reactive unbalanced magnetron sputtering. Applied Surface Science, 255 (5). pp. 2925-2931. ISSN 0042-207X
Barshilia, Harish C and Selvakumar, N and Rajam, KS and Biswas, A (2008) Optical properties and thermal stability of TiAlN/AlON tandem absorber prepared by re active DC/RF magnetron sputtering. Sol. Energy Mater. Sol. Cells, 92 (11). pp. 1425-1433. ISSN 0927-0248
Barshilia, Harish C and Selvakumar, N and Rajam, KS and Biswas, A (2008) Spectrally selective NbAlN/NbAlON/Si3N4 tandem absorber for high temperature solar applications. Solar Energy Materials and Solar Cells, 92 . pp. 495-504.
Barshilia, Harish C and Selvakumar, N and Rajam, KS and Biswas, A (2008) Structure and optical properties of pulsed sputter deposited CrxOy/Cr/Cr2O3 solar selective coatings. Journal of Applied Physics, 103 (023507). ISSN 0021-8979
Barshilia, Harish C and Selvakumar, N and Rajam, KS and Gopinadhan, K and Chaudhary, Sujeet (2008) Investigation of interface properties of sputter deposited TiN/CrN superlattices by low-angle X-ray reflectivity. Journal Of Physics D: Applied Physics, 41 (205409).
Barshilia, Harish C and Selvakumar, N and Rajam, KS and Sridhara Rao, DV and Muraleedharan, K (2008) Deposition and characterization of TiAlN/TiAlON/Si3N4 tandem absorbers prepared using reactive direct current magnetron sputtering. Thin Solid Films, 516 . pp. 6071-6078.
Basu, Bharathibai J and Vasantharajan, N (2008) Temperature dependence of the luminescence lifetime of a europium complex immobilized in different polymer matrices. Journal of Luminescence, 128 (10). pp. 1701-1708. ISSN 0022-2313
Bhattacharyya, S and Banerjee, A and Bhaumik, SK (2008) Failure analysis of oxygen hose of the lance equipment in LIB shop of Tata steel. Engineering Failure Analysis, 15 (8). pp. 1019-1026.
Bhaumik, SK and Saikrishna, CN and Ramaiah, KV and Venkataswamy, MA (2008) Understanding the fatigue behaviour of Niticu shape memory alloy wire thermal actuator. Key Engineering Materials . pp. 301-316.
Bhaumik, SK and Sujata, M and Venkataswamy, MA (2008) Fatigue failure of aircraft components. Engineering Failure Analysis, 15 (6). pp. 675-694.
Biswas, A and Bhattacharya, D and Barshilia, Harish C and Selvakumar, N and Rajam, KS (2008) Spectroscopic ellipsometric characterization of TiAlN/TiAlON/Si3N4 tandem absorber for solar selective applications. Applied Surface Science, 254 . pp. 1694-1699. ISSN 0042-207X
Chattopadhyay, Lalitha and Murthy, Sridhara S (2008) Bending stress intensity factors of an elastic plate containing two equal collinear cracks and subjected to a concentrated moment. International Journal of Applied Mathematics and Mechanics, 4 (4). pp. 59-75. ISSN 0973-0184
Chowdhury, P and Barshilia, Harish C and Selvakumar, N and Deepthi, B and Rajam, KS and Chaudhuri, AR and Krupanidhi, SB (2008) Structural and electrical properties of TiO2 thin films prepared by thermal oxidation. Physica B, 403 (19-20). 3718 -3723. ISSN 0921-4526
Dayananda, GN and Subba Rao, M (2008) Effect of strain rate on properties of superelastic NiTi thin wires. Materials Science and Engineering: A Struct. Mater., 486 (1-2). pp. 96-103.
Dutta, Soma (2008) Design and simulation of optimum piezoelectric MEMS microactuator for smart control applications. Indian Journal of Engineering and Materials Sciences, 15 (2). pp. 99-103. ISSN 0971-4588
Jarali, Chetan S and Raja, S (2008) Homogenization and pseudoelastic behavior of composite materials reinforced with shape memory alloy fibers. Journal of Composite Materials, 42 (17). pp. 1685-1707. ISSN 0021-9983
Jarali, Chetan S and Raja, S and Upadhya, AR (2008) Micro-mechanical behaviors of SMA composite materials under hygro-thermo-elastic strain fields. International Journal of Solids and Structures, 45 . p. 4347. ISSN 0020-7683
Kashyap, SK and Raol, JR (2008) EVALUATION OF DERIVATIVE FREE KALMAN FILTER FOR NON-LINEAR STATE-PARAMETER ESTIMATION AND FUSION. Aeronautical Society of India, Journal, 60 (2). ISSN 0001-9267
Kashyap, SK and Raol, JR (2008) Fuzzy logic applications in filtering and fusion for target tracking13; 13;. Defence Scientific Information amp; Documentation Centre, 58 (1). pp. 120-135.
Kashyap, SK and Raol, JR (2008) Neuronal Architectures for Mixed Estimation and Stabilized Output Error Methods. Journal of System Science and Engineering, System Society of India, 17 (2). pp. 29-36. ISSN 0972-5032
Kodanda, B (2008) Feeder and Short haul air transport systems: Current issues related to infrastructure development for sustainability of Civil Aviation growth in India. Aerospace Engineering Journal, 89 . pp. 15-28. ISSN 0257-3423
Kumar, Rajan and Viswanath, PR and Ramesh, ON (2008) Nose blowing for side force control on slender cones at high incidence. Journal of Aircraft, 45 (4). pp. 1156-1166. ISSN 0021-8669
Naidu, VPS and Raol, JR (2008) Performance Evaluation of Interacting Multiple Model Kalman filter. IETE Journal of Education, 49 (3). pp. 95-108.
Naidu, VPS and Raol, JR (2008) Pixel-level image fusion using wavelets and principal component analysis. Defence Science Journal, 58 (3). 338 -352. ISSN 0011-748X
Narasimhan, SV and Haripriya, AR and Kumar, B K Shreyamsha (2008) Improved wigner-ville distribution performance based on DCT/DFT harmonic wavelet transform and modified magnitude group delay. Signal Processing, 88 (1). pp. 1-27.
Narasimhan, SV and Harish, M and Haripriya, AR and Basumallick, Nandini (2008) Discrete cosine harmonic wavelet transform and its application to signal compression and subband spectral estimation using modified group delay. Signal, Image and Video Processing . pp. 1-26.
Narasimhan, SV and Mallick, Nandini Basu and Chaitanya, Ratana (2008) Improved phase estimation based on complete bispectrum and modified group delay. Signal, Image and Video Processing .
Novak, V and Sittner, P and Dayananda, GN and Braz-Fernandes, FM and Mahesh, KK (2008) Electric resistance variation of NiTi shape memory alloy wires in thermomechanical tests: Experiments and simulation. Materials Science and Engineering A . pp. 127-133.
Padaki, NV and Alagirusamy, R and Deopura, BL and Sugun, BS and Fangueiro, Raul (2008) Low velocity impact behaviour of textile reinforced composites. Indian Journal of Fibre Br Textile Research .
Panda, PK and Jaleel, VA and Lefebvre, G (2008) Thermal shock study of a-alumina doped with 0.2% MgO. Materials Science and Engineering A, 485 . pp. 558-561. ISSN 0921-5093
Porkodi, P and Yegnaraman, V and Kamaraj, P and Kalyanavalli, V and Jeyakumar, D (2008) Synthesis of NASICON-A molecular precursor-based approach. Chemistry of Materials, 20 (20). pp. 6410-6419.
Raghu Prasad, BK and Pavan Kumar, DVTG (2008) Analysis of composite ENF specimen using higher order beam theories. Thin-Walled Structures, 46 (6). 676 -688.
Rajendran, K and Kitoh, A and Mizuta, R and Sajani, S and Nakazawa, T (2008) High-resolution simulation of mean convection and its intraseasonal variability over the tropics in the MRI/JMA 20-km mesh AGCM. Journal of Climate, 21 (15). pp. 3722-3739. ISSN 0894-8755
Rangaraj, L and Suresha, SJ and Divakar, C and Jayaram, V (2008) Low-temperature processing of ZrB2-ZrC composites by reactive hot pressing. Metallurgical and Materials Transactions A, 39A (7). pp. 1496-1505. ISSN 1073-5623
Rao, Sandhya and Rao, RMVGK (2008) Cure studies on bifunctional epoxy matrices using a domestic microwave oven. Polymer Testing, 27 (5). pp. 645-652.
Savanur, Shobha R. and Kashyap, SK and Raol, JR (2008) Adaptive Neuro-Fuzzy Based Sensor Fault Detection, Isolation and Reconfiguration. Journal of Systems Science and Engineering, System Society of India, 17 (1). ISSN 0972-5032
Shashikala, Prakash and Krishna Mohan , Nutheti and Vinod , S Chippalakatti (2008) Design and development of high voltage high power operational amplifier using thick film technology. Sadhana, 33 (5). pp. 713-720. ISSN 0256-2499
Shubha, V and Dutta, Soma and Ramesh, TG (2008) Pressure effect on Electrical Resistivity of Bi-Sb Alloys. J. High temps high press , 37 . p. 317. ISSN 0018-1544
Singh, AK and Liermann, Hanns-Peter and Akahama, Y and Saxena, SK and Menendez-Proupin, Eduardo (2008) Strength of polycrystalline coarse-grained platinum to 330 GPa13; and of nanocrystalline platinum to 70 GPa from high-pressure13; x-ray diffraction data. Journal of Applied Physics, 103 (6).
Singh, GK and Deodhare, Girish and Patel, Vijay V and Chetty, Shyam (2008) Automated process for optimal structural notch-filter design. Journal of Guidance Control and Dynamics, 31 (5). pp. 1504-1508. ISSN 0731-5090
Sivapragasam, M and Deshpande, MD and Sridhara, SN and Ramamurthy, S (2008) Numerical And Experimental Studies on an Aerodynamic Distortion Grill. Journal of Aerospace sciences and Technology, 60 (3). ISSN 1735-2134
Srivastava, Meenu and William Grips, VK and Rajam, KS (2008) Influence of SiC, Si3N4 and Al2O3 particles on the structure and properties of electrodeposited Ni. Materials Letters, 62 . pp. 3487-3489. ISSN 0167-577X
Srivastava, Meenu and William Grips, VK and Rajam, KS (2008) Structure and properties of electrodeposited Ni-Co-YZA composite coatings. J Appl Electrochem, 38 (5). pp. 669-677. ISSN 1572-8838
SureshKumar, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of a stainless steel pipeline. Engineering Failure Analysis, 15 . pp. 497-504.
Vaitheeswaran, SM (2008) DUAL BEAM SYNTHESIS USING ELEMENT POSITION PERTURBATIONS AND THE G3-GA ALGORITHM. Progress in Electromagnetic Research, 87 . pp. 43-61. ISSN 1070-4698, E-ISSN: 1559-8985
Vaitheeswaran, SM and Narasimhan, SV (2008) Stencil coefficient computations for the multiresolution time domain method - A filterbank approach. Progress in Electromagnetics research-PIER, 81 . pp. 149-166.
Vanaja, A and Padmavathi, T and Rao, RMVGK and Jyotsna, T.S (2008) Phenolic novolac IPNs for High Performance Composite Applications. International Journal of Mechanical Engineering and Materials Sciences, 1 (2). pp. 123-127.