Browse by Type

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators Name | Item Type | No Grouping
Number of items: 55.

Anandan, C and Rajam, KS (2007) Composition, structure and morphology of oxide layers formed on austenitic stainless steel by oxygen plasma immersion ion implantation. Applied Surface Science, 253 . pp. 6854-6859.

Anjana, Jain and Vijayan, Kalyani (2007) Effect of thermal aging on the crystal structural characteristics of TEFLON. Polymer Engineering and Science, 47 (11). 1724 -1729.

Aruna, ST and William Grips, VK and Selvan, Ezhil V and Rajam, KS (2007) Studies on electrodeposited nickel–yttria doped ceria composite coatings. J Appl Electrochem, 37 . pp. 991-1000. ISSN 1572-8838

Balaraju, JN and Jahan, SM and Anjana, Jain and Rajam, KS (2007) Structure and phase transformation behavour of electroless NI-P alloys containing tin and tungsten. Journal of Alloys and Compounds, 436 . p. 319.

Balaraju, JN and Jahan, SM and Jain, Anjana and Rajam, KS (2007) Structure and phase transformation behavior of electroless Ni-P alloys containing tin and tungsten. Journal of Alloys and Compounds, 436 (1-2). pp. 319-327. ISSN 0925-8388

Balaraju, JN and Rajam, KS (2007) Electroless deposition and characterization of high phosphorus13; Ni-P-Si3N4 composite coatings. International Journal of Electrochemical Science, 2 (10). pp. 747-761. ISSN 1452-3981

Barshilia, Harish C and Deepthi, B and Rajam, KS (2007) Deposition and characterization of CrN/Si3N4 and CrAlN/Si3N4 nanocomposite coatings prepared using reactive DC unbalanced magnetron sputtering. Surface and Coatings Technology, 201 (24). pp. 9468-9475. ISSN 0257-8972

Barshilia, Harish C and Deepthi, B and Selvakumar, N and Anjana, Jain and Rajam, KS (2007) Nanolayered multilayer coatings of CrN/CrAlN prepared by reactive DC magnetron sputtering. Applied Surface Science , 253 . pp. 5076-5083.

Barshilia, Harish C and Rajam, KS (2007) Performance evaluation of reactive direct current unbalanced magnetron sputter deposited nanostructured TiN coated high-speed steel drill bits. Bulletin of Materials Science, 30 (6). pp. 607-614. ISSN 0250-4707

Barshilia, Harish C and Selvakumar, N and Rajam, KS (2007) Thermal stability of TiAlN/TiAlON/Si3N4 tandem absorbers prepared by reactive direct current magnetron sputtering. Journal of Vacuum Science andTechnology A, 25 (2). pp. 383-390. ISSN 0022-5355

Bhagyashekar, MS and Rao, RMVGK (2007) Effects of material and test parameters on the wear behavior of particulate filled composites Part 1: SiC-epoxy and 13; Gr-epoxy composites. Journal of Reinforced Plastics and Composites, 26 . pp. 1753-1768.

Chattopadhyay, Lalitha (2007) Analytical solution for bending stress intensity factor in an orthotropic elastic plate containing a crack and subjected to concentrated moments. Archive of Applied Mechanics, 77 (1). pp. 49-62. ISSN 0939-1533

Chattopadhyay, Lalitha and Murthy, Sridhara S and Viswanath, S (2007) Exact solution for bending of an elastic plate containing a crack and subjected to a concentrated moment. International Journal of Computational Methods, 4 (2). pp. 265-281. ISSN 1793-6969

Dayananda, GN and Varughese, B and Subba Rao, M (2007) Shape memory alloy based smart landing gear for an airship. Journal of Aircraft, 44 (5). pp. 1469-1477.

Jain, Anjana and Vijayan, Kalyani (2007) Effect of thermal aging on the crystal structural characteristics of poly(tetra fluoro ethylene). Polymer Engineering and Science, 47 (11). pp. 1724-1729.

Kamali, C and Pashilkar, AA and Raol, JR (2007) Real time parameter estimation for reconfigurable control of unstable aircraft. Defence Science Journal . pp. 341-352.

Kamali, C and Pashilkar, AA and Raol, JR (2007) Real time parameter estimation for reconfigurable control of unstable aircraft. Defence Science Journal, 57 (4). pp. 527-537.

Kashyap, SK and Raol, JR (2007) Interpretation and Unification of Fuzzy Set Operators. Journal of Systems Science and Engineering, System Society of India, 16 (1). pp. 26-33. ISSN 0972-5032

Kumar, Nagendra D and Raja, S and Ikeda, T (2007) Active vibration control of smart plates with partially debonded multilayered pzt aatuators. Smart Materials and Structures, 16 . pp. 1584-1594.

Lathasree, P and Senthilkumar, T and Madhuranath, Padma (2007) Modelling,simulation, and analysis of HAL Bangalore13; international airport. Defence Science Journal, 57 (6). pp. 866-876.

Liermann, HP and Singh, AK and Somayazulu, M and Saxena, SK (2007) Compression behavior of NbC under nonhydrostatic conditions to 57 GPa 13; 13;. International Journal of Refractory Metals and Hard Materials, 25 (5-6). pp. 386-391.

Manjuprasad, M and Manohar, CS (2007) Adaptive random field mesh refinements in stochastic finite element reliability analysis of structures. Computer Modeling in Engineering amp; Sciences , 19 (1). pp. 23-54.

Naidu, VPS and Girija, G and Raol, JR (2007) Data Fusion for Identity Estimation and Tracking of Centroid using Imaging Sensor Data. Defence Science Journal, 57 (5). pp. 639-652. ISSN 0011-748X

Naidu, VPS and Raol, JR (2007) Target Tracking with Multi Acoustic Array Sensors Data. Defence Science Journal, 57 (3). pp. 289-303. ISSN 0011-748X

Naidu, VPS and Raol, JR (2007) Target tracking with multi acoustic array sensors data. Defence Science Journal, 57 (3). pp. 289-303.

Nair, Raveendranath U and Jha, RM (2007) Novel A-sandwich radome design for airborne applications. Electronics Letters, 43 (15). pp. 787-788.

Niraj, N and Govind, - and Saikrishna, CN and Ramaiah, KV and Bhaumik, SK and Nair, KS and Mittal, MC (2007) Vacuum induction melting of NiTi shape memory alloys in graphite crucible. Materials Science and Engineering: A, 465 (1-2). pp. 44-48.

Panda, PK (2007) Ceramic nanofibers by electrospinning technique - A review. Ceramic Society, 66 . pp. 65-76.

Panda, PK and Ramakrishna, S (2007) Electrospinning of alumina nanofibers using different precursors. Journal of Materials Science, 42 . pp. 2189-2193.

Pashilkar, AA and Sundararajan, N and Saratchandran, P (2007) Adaptive nonlinear neural controller for aircraft under actuator failures. Journal of Guidance, Control and Dynamics, 30 (3). pp. 835-847. ISSN 1533-3884

Pathikumar, S and Jayaram, V and Chakshi, AH and Divakar, C (2007) Synthesis of bulk, dense, nano-crystalline yttrium aluminum garnet from co-precipitated powders. Journal of American Ceramic Society, 90 (11). pp. 3638-3641.

Pradeep, D and Reddy, N Janardhana and Kumar, C Rahul and Srikanth, L and Rao, RMVGK (2007) Studies on mechanical behavior of glass epoxy composites with induced defects and correlations with NDT characterization parameters. Journal of Reinforced Plastics and Composites, 26 (15). pp. 1539-1556.

Prathap, Gangan and Manju, S and Senthilkumar, V (2007) Unsymmetric finite element formulation and variational incorrectness. Structural Engineering Mechanics, 26 (1). pp. 31-42.

Propin, Menendez E and Singh, AK (2007) Ab initio calculations of elastic properties of compressed pt. Physics Review B, 76 (5).

Raja, S and Upadhya, AR (2007) Active control of wing flutter using piezoactuated surface. Journal of Aircraft, 44 (1). pp. 71-80. ISSN 0021-8669

Ramesh, V and Deshpande, M (2007) Unsteady flow computations for flow past multiple moving boundaries using LSKUM. Computers and Fluids, 36 (10). pp. 1592-1608.

Ray, AK and Dwarakadasa, ES and Das, DK and Ranganath, VR (2007) Fatigue behavior of a thermal barrier coated superalloy at 800 degree C. Materials Science and Engineering: A, 448 (1-2). pp. 294-298.

Sahoo, B and Panda, PK (2007) Dielectric, ferroelectric and piezoelectric properties of13; (1 x2013; x)[Pb0.91La0.09(Zr0.60Ti0.40)O3]x2013;x[Pb(Mg1/3Nb2/3)O3],13; 0 xA3; x xA3; 1. Journal of Materials Science, 42: . pp. 4270-4275.

Sahoo, B and Panda, PK (2007) Effect of CeO2 concentration on dielectric, ferroelectric and piezoelectric properties of PMN-PT (67/33) composition. Journal of Materials Science, 42 . pp. 4745-4752.

Sahoo, B and Panda, PK (2007) Effect of CeO2 on dielectric, ferroelectric and piezoelectric13; properties of PMNx2013;PT (67/33) compositions. Journal of Materials Science, 42 . pp. 4745-4752.

Sahoo, B and Panda, PK (2007) Ferroelectric, dielectric and piezoelectric properties13; of Pb1x2013;xCex(Zr0.60Ti0.40)O3, 0 xA3; x xA3; 0.08. Journal of Materials Science, 42 . pp. 9684-9688.

Sellappan, Pathikumar and Jayaram, Vikram and Chokshi, Atul H and Divakar, C (2007) Synthesis of bulk, dense, nanocrystalline yttrium aluminum garnet from amorphous powders. Journal of the American Ceramic Society, 90 (11). pp. 3638-3641.

Sengupta, TK and Lim, TT and Sajjan, Sharanappa V and Ganesh, S and Soria, J (2007) Accelerated flow past a symmetric aerofoil:experiments and computations. Journal of Fluid Mechanics, 591 . pp. 255-288.

Shankar, PN (2007) Frequencies of gravity-capillary waves on highly curved interfaces with edge constraints. Fluid dynamics research, 39 (6). pp. 457-474. ISSN 0169-5983

Shankar, PN (2007) Three-dimensional flow in a cylinder with a stress-free sidewall. Fluid dynamics research, 39 (7). pp. 569-589.

Singh, AK (2007) Pressure-volume data for epsilon iron and platinum to earth-core pressures and above from one-parameter universal equation of state. Physics of the Earth and Planetary Interiors, 164 (1-2). pp. 75-82.

Singh, AK and Liermann, HP and Akahama, Y and Kawamura, H (2007) Aluminum as a pressure-transmitting medium cum pressure standard for x-ray diffraction experiments to 200 GPA with diamond anvil cells. Journal of Applied Physics, 101 (12).

Singh, AK and Liermann, HP and Akahama, Y and Kawamura, H (2007) Aluminum as a pressure-transmitting medium cum pressure standard for x-ray diffraction experiments to 200 GPa with diamond anvil cells. Journal of Applied Physics, 101 (12). p. 123526.

Singh, Manish K and Dhanalakshmi, K and Chakrabartty, SK (2007) Navier-stokes analysis of airfoils with gurney flap. Journal of Aircraft, 44 (5). pp. 1487-1493.

Srivastava, Meenu and William Grips, VK and Jain, Anjana and Rajam, KS (2007) Influence of SiC particle size on the structure and tribological properties of Ni-Co composites. Surface and Coatings Technology, 202 . pp. 310-318. ISSN 0257-8972

Srivastava, Meenu and William Grips, VK and Rajam, KS (2007) Electrochemical Deposition and Tribological Behaviour of Ni and Ni-Co Metal Matrix composites with SiC nano-particles. Applied Surface Science, 253 . pp. 3814-3824. ISSN 0042-207X

Subramanya, HY and Viswanath, S and Narasimhan, R (2007) Influence of crack tip constraint on void growth in pressure sensitive plastic solids-1: 2D analysis. Engineering Fracture Mechanics, 75 . pp. 1045-1063.

Suresh Kumar, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2007) Coating failure in compressor rotor blades of an aeroengine. Coating failure in compressor rotor blades of an aeroengine, 14 (5). pp. 913-919.

Tarafder, S and Sivaprasad, S and Ranganath, VR (2007) Comparative assessment of fatigue and fracture behaviour of cast and forged railway wheels. Fatigue amp; Fracture of Engineering Materials and Structures, 30 (9). pp. 863-876.

Veena, S and Narasimhan, SV (2007) Laguerre escalator lattice and feedforward/feedback active noise control13;. Signal Processing, 87 (4). pp. 725-738.

This list was generated on Thu Apr 17 01:06:34 2014 IST.