Browse by Type

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators Name | Item Type | No Grouping
Number of items: 56.

Journal Article

Aruna, ST and Bindu, CN and Selvan, Ezhil V and William Grips, VK and Rajam, KS (2006) Synthesis and properties of electrodeposited Ni/ceria nanocomposite coatings. Surface & Coatings Technology, 200 (24). pp. 6871-6880. ISSN 0257-8972

Balaraju, JN and Sankara Narayanan, TSN and Seshadri, SK (2006) Structure and phase transformation behaviour of electroless Nix2013;P composite coatings. Materials Research Bulletin, 41 . pp. 847-860.

Balaraju, JN and Anandan, C and Rajam, KS (2006) Influence of codeposition of copper on the structure and morphology of electroless Nix2013;Wx2013;P alloys from sulphate- and chloride-based baths. Surface and Coatings Technology, 200 (12-13). pp. 3675-3681.

Balaraju, JN and Ezhil Selvi, V and William Grips, VK and Rajan, KS (2006) Electrochemical studies on electroless ternary and quaternary Nix20P based alloys. Electrochimica Acta, 52 (3). pp. 1064-1074. ISSN 0013-4686

Balaraju, JN and Jahan, SM and Anadan, C and Rajam, KS (2006) Studies on electroless Ni-W-P and Ni-W-Cu-P alloy coatings using chloride-based bath13;. Surface amp; Coatings Technology, 200 (16-17). pp. 4885-4890.

Balaraju, JN and Jahan, SM and Rajam, KS (2006) Studies on autocatalytic deposition of ternary Ni-W-P alloys using nickel sulphamate bath. Surface and Coatings Technology, 201 (3-4). pp. 507-512. ISSN 0257-8972

Balaraju, JN and Jahan, SM and Rajam, KS (2006) Studies on autocatalytic deposition of ternary Nix2013;Wx2013;P alloys using nickel sulphamate bath. Surface and Coatings Technology, 201 (3-4). pp. 507-512.

Balaraju, JN and Kalavati, and Rajam, KS (2006) Influence of particle size on the microstructure, hardness and corrosion resistance of electroless Ni-P-Al2O3 composite coatings13;. Surface and Coatings Technology, 200 (12-13). pp. 3933-3941.

Barshilia, Harish C and Deepthi, B and Prabhu, ASA and Rajam, KS (2006) Superhard nanocomposite coatings of TiN/Si3N4 prepared by reactive direct current unbalanced magnetron sputtering. Surface amp; Coatings Technology, 201 (1-2). pp. 329-337.

Barshilia, Harish C and Deepthi, B and Rajam, KS (2006) Deposition and characterization of TiAlN/Si3N4 superhard nanocomposite coatings prepared by reactive direct current unbalanced magnetron sputtering. Vaccum, 81 (4). pp. 479-488.

Barshilia, Harish C and Rajam, KS (2006) Reactive sputtering of hard nitride coatings using asymmetric-bipolar pulsed DC generator. Surface and Coatings Technology, 201 (3-4). pp. 1827-1835. ISSN 0257-8972

Barshilia, Harish C and Rajam, KS and Anjana, Jain and Gopinadhan, K and Chaudhary, Sujeet (2006) A comparative study on the structure and properties of nanolayered TiN/NbN and TiAlN/TiN multilayer coatings prepared by reactive direct current magnetron sputtering. Thin Solid Films, 503 . pp. 158-166.

Barshilia, Harish C and Selvakumar, N and Deepthi, B and Rajam, KS (2006) A comparative study of reactive direct current magnetron sputtered CrAlN and CrN coatings. Surface and Coatings Technology, 201 (6). pp. 2193-2201. ISSN 0257-8972

Barshilia, Harish C and Selvakumar, N and Rajam, KS and Sridhara Rao, DV and Muraleedharan, K and Biswas, A (2006) TiAlN/TiAlON/Si3N4 tandem absorber for high temperature solar selective applications. Applied Physics Letters, 89 (191909). ISSN 0003-6951

Bharathibai, Basu J (2006) Optical oxygen sensing based on luminescence quenching of platinum porphyrin dyes doped in ormosil coatings. Sensors and Actuators B chemical, 123 . pp. 568-577.

Bhaumik, SK and Saikrishna, CN and Ramaiah, KV (2006) Effects of thermo-mechanical cycling on the strain response of Ni-Ti-Cu shape memory alloy wire actuator13;. Materials Science amp; Engineering A (Structural Materials: Properties, Microstructure and Processing, 428 (1-2). pp. 217-224.

Deshpande, MD and Srinidhi, BG (2006) Mixed convection in a lid-driven cavity: appearance of bifurcation, periodicity and hysteresis13;. Current Science, 89 (10). pp. 1720-1728.

Downs, RT and Singh, AK (2006) Analysis of deviatoric stress from nonhydrostatic pressure on a single crystal in a diamond anvil cell : The case of monoclinic aegirine, NaFeSi2O6. Journal of Physics and Chemistry of Solids, 67 (9-10). pp. 1995-2000. ISSN 0022-3697

Guruprasad, R and Nikam, Khaiser (2006) Initiatives in Digital Content Management: A Case Study on Saras (India's First Civil Aircraft Programme). Journal of Information Management and Scientometrics, 3 (1). pp. 40-53. ISSN 0972-9925

Gutierrez, Gonzalo and Menendez-Proupin, Eduardo and Singh, AK (2006) Elastic Properties of the bcc structure of Bismuth at high pressure. Journal of Applied Physics, 99 (103504).

Imoni, SO and Ramamohan, TR and Otunta, FO (2006) Embedded implicit Runge-Kutta Nystrom method for solving second-order differential equations. International Journal of Computer Mathematics, 83 (11). pp. 777-784.

Iyer, RV and Sudhakar, A and Vijayan, Kalyani (2006) Decomposition behavior of kevlar 49 fibers: Part II. At T values lt; Td. High Performance Polymers, 18 . pp. 495-517.

Kashyap, SK and Girija, G and Raol, JR (2006) Error model-converted measurement and error model-modified extended Kalman filters for target tracking. Defence Science Journal, 56 (5). pp. 679-692.

Kidambi, R (2006) Oscillatory Stokes flow in a cylindrical container. Fluid Dynamics Research, 38 . pp. 274-294.

Manjunatha, CM (2006) Fatigue crack growth prediction under spectrum load using crack driving force DK 13;. AIAA Journal, 44 (2). pp. 396-399. ISSN 0001-1452

Mao, Ho-kwang and Badro, J and Shu, J and Hemley, RJ and Singh, AK (2006) Strength anisotropy and preferred orientation of solid argon at high pressures. Journal of Physics: Condensed Matter, 18 . S963-S968.

Mao, Ho-kwang and Badro, James and Shu, Jinfu and Hemley, Russell J and Singh, AK (2006) Strength, Anisotropy, and preferred orientation of solid13; argon at high pressures. Journal of Physics: Condensed Matter, 18 . pp. 963-968. ISSN 0953-8984

Mukund, R and Viswanath, PR and Narasimha, R and Prabhu, A and Crouch, JD (2006) Relaminarization in highly favourable pressure gradients on a convex surface13;. Journal of Fluid Mechanics, 566 (--). pp. 97-115.

Murthy, Onkar and Munirudrappa, N and Srikanth, L and Rao, RMVGK (2006) Strength and stiffness optimization studies on honeycomb core sandwich panels13;. Journal of Reinforced Plastics and Composites, 25 (6). pp. 663-671.

Naidu, VPS and Girija, G and Raol, JR (2006) Estimation of Launch and Impact Points of a Flight Trajectory using U-D Kalman Filter/Smoother. Defence Science Journal, 56 (4). pp. 451-463. ISSN 0011-748X

Narasimhan, SV and Harish, M (2006) Spectral estimation based on discrete cosine transform and13; modified group delay. Signal Processing, 86 . pp. 1586-1596.

Nirmal, C and Maithi, SN and Padmavathi, T and Vanaja, A and Rao, RMVGK (2006) Studies on hydroxyl terminated polybutadiene toughened phenolic resin13;. High Performance Polymers, 18 (1). pp. 57-69.

Padaki, NV and Alagirusamy, R and Sugun, BS (2006) Knitted Preforms for Composite Application. Journal of Industrial Textiles .

Padmarajaiah, SK and Ramaswamy, SK and Ramaswamy, A (2006) A beam and arch action model for computing the shear strength of prestressed and reinforced HSFRC beams. Journal of Structural Engineering, 28 (1).

Panda, PK and Jaleel, VA and Ushadevi, S (2006) Hydrothermal synthesis of boehmite and a-alumina from Bayer’s alumina trihydrate. Journal of Materials Science, 41 . pp. 8386-8389. ISSN 0022-2461

Pavan, RMV and Saravanan, V and Dinesh, AR and Rao, YJ and Srihari, S and Revathi, A (2006) Hygrothermal effects on painted and unpainted glass/epoxy composites - Part A: Moisture absorption characteristics. Journal of Reinforced Plastics and Composites, 20 (12). pp. 1036-1047.

Prathap, Gangan and Senthilkumar, V and Manju, S (2006) Mesh distortion immunity of finite elements and the best-fit paradigm,. Sadhana, 31 (1). pp. 505-514.

Raja, S and Pashilkar, AA and Sreedeep, R and Kamesh, JV (2006) Flutter control of a composite plate with piezoelectric multilayered actuators13;. Aerospace Science and Technology, 10 (5). pp. 435-441.

Raja, S and Sinha, PK and Prathap, Gangan and Dwarakanathan, D (2006) Thermally induced vibration control of composite plates and shells with piezoelectric active damping. Smart Materials and Structures, 13 (4). pp. 939-950. ISSN 0964-1726

Raju, M and Reddy, CR and Narasimha Swamy, MR and Giridhar, G and Srikanth, L and Rajendra Prakash, M and Rao, RMVGK (2006) Repair Effectiveness Studies on Impact Damaged Sandwich Composite Constructions. Journal of Reinforced Plastics and Composites, 25 (1). ISSN 0731-6844

Ramesh, TG and Shubha, V (2006) Thermal characterization of materials at high pressures. Journal of Materials Science, 41 (5). 1617-1 621. ISSN 0022-2461

Rao, RMVGK and Rao, Sandhya and Sridhara, BK (2006) Studies on tensile and interlaminar shear strength properties of thermally cured and microwave cured glass-epoxy composites13;. Journal of Reinforced Plastics and Composites, 25 (7). pp. 783-795.

Ray, AK and Roy, N and Dash, B and Das, DK and Ranganath, VR (2006) High temperature mechanical properties of thermal barrier coated superalloy applied to combustor liner of aero engines13;. High Temperature Materials and Processes, 25 (1-2). pp. 109-121.

Singh, AK and Liermann, HP and Saxena, SK and Mao, HK and Usha Devi, S (2006) Nonhydrostatic compression of Gold powder to 60 GPa in a diamond anvil cell: Estimation of compressive strength from X-ray diffraction data. Journal of Physics: Condensed Matter, 18 . pp. 969-978. ISSN 0953-8984

Singh, AK and Menendez, Proupin E and Gutierrez, G and Akahama, Y and Kawamura, H (2006) Nonhydrostatic compression of bismuth to 222GPa: Some constraints on elasticity of the bcc-phase13;. Journal of the Physics and Chemistry of Solids, 67 (9-10). pp. 2192-2196.

Singh, KL and Dattaguru, B and Ramamurthy, TS (2006) Numerically integrated MVCCI for fracture analysis on delaminated composite panels in compression. Mechanics of Advanced Materials and Structures, 13 (4). pp. 303-316.

Sivaprasad, S and Tarafder, S and Ranganath, VR and Tarafder, M and Ray, KK (2006) Corrosion fatigue crack growth behaviour of naval steels. Corrosion Science, 48 (8). pp. 1996-2013.

Srivastava, Meenu and Selvi, Ezhil V and William Grips, VK and Rajam, KS (2006) Corrosion resistance and Microstructure of electrodeposited nickel-cobalt alloy coatings. Surface and Coatings Technology, 201 . pp. 3051-3060. ISSN 0257-8972

Sudesh, K Kashyap and Naidu, VPS and Jatinder, Singh and Girija, G and Raol, JR (2006) Tracking of multiple targets using interactive multiple model and data association filter. Journal of Aerospace Science and Technologies, 58 (1). pp. 66-74.

Takemura, K and Singh, AK (2006) High-pressure equation of state for Nb with a helium-pressure medium:Powder x-ray diffraction experiments. Physical Review B, 73 . pp. 224119-224128.

Venkatakrishnan, L and Krothapalli, A (2006) Forward flight effects on fan noise from supersonic 2-D inlets. Journal of Aircraft, 43 (5). pp. 1549-1552. ISSN 0021-8669

Venkatakrishnan, L and Sundaram, S and Viswanath, PR (2006) Hysteresis and broad flow features on a Swept Wing at high lift. Journal of Aircraft, 43 (4). pp. 1036-1043. ISSN 001-8669

Venkatesh, TN (2006) Mesoscale interactions during the genesis and intensification of the 1999 Orissa supercyclone. Mausam, 57 (1). pp. 31-36.

Venkatesh, TN (2006) Preliminary results on the simulation of the 1999 Orissa supercyclone using a GCM with a new boundary layer code. Mausam, 57 (1). pp. 119-128.

Viswanath, PR and Mukund, R and Narasimha, R and Crouch, JD (2006) Relaminarization on swept leading edges under high-lift conditions. AIAA Journal, 44 (11). pp. 2621-2629. ISSN 0001-1452

William Grips, VK and Barshilia, Harish C and Ezhil selvi, V and Kalavati, -- and Rajam, KS (2006) Electrochemical behavior of single layer CrN, TiN, TiAlN coatings and nanolayered TiAlN/CrN multilayer coatings prepared by reactive direct current magnetron sputtering. Thin Solid Films, 514 (1-2). pp. 204-211.

This list was generated on Sat Jul 26 01:07:02 2014 IST.