Browse by Type
Number of items: 47.
Aruna, ST and Diwakar, S and Anjana, Jain and Rajam, KS (2005) Comparative study on the effect of current density on Ni and Ni-Al nanocomposite coatings produced by electrolytic deposition. Surface Engineering, 21 (3). pp. 209-214. ISSN 0267-0844
Aruna, ST and Diwakar, S and Jain, Ajana and Rajam, KS (2005) Comparative study on the effect of current density on Ni and Ni-Al2O3 nanocomposite coatings produced by electrolytic deposition13;. Surface Engineering, 21 (3). pp. 209-214.
Asokan, K and Anil Kumar , CV and Dasan, J and Radhakrishnan, K and Satheesh Kumar, K and Ramamohan, TR (2005) Review of chaos in the dynamics and rheology of suspensions of orientable particles in simple shear flow subject to an external periodic force. Journal of Non-Newtonian Fluid Mechanics, 129 . pp. 128-142.
Balaraju, JN and Anandan, C and Rajam, KS (2005) Electroless deposition of ternary Ni-W-P alloys from sulphate and chloride based baths. Surface Engineering, 215 (20). pp. 215-220. ISSN 0267-0844
Balaraju, JN and Anandan, C and Rajam, KS (2005) Morphological study of ternary Ni-Cu-P alloys by atomic force microscopy13;. Applied Surface Science, 250 (1-4). pp. 88-97. ISSN 0042-207X
Balaraju, JN and Anandan, C and Rajam, KS (2005) Morphological study of ternary Nix2013;Cux2013;P alloys by atomic force microscopy. Applied Surface Science, 250 (1-4). pp. 88-97.
Balaraju, JN and Rajam, KS (2005) Electroless deposition of Nix2013;Cux2013;P, Nix2013;Wx2013;P and Nix2013;Wx2013;Cux2013;P alloys. Surface and Coatings Technology, 195 (2-3). pp. 154-161.
Barshilia, Harish C and Rajam, KS (2005) A Raman-scattering study on the interface structure of nanolayered TiAlN/TiN and TiN/NbN multilayer thin films grown by reactive dc magnetron sputtering. Journal of Applied Physics, 98 (1). 014311-1.
Barshilia, Harish C and Rajam, KS and Sridhara Rao, DV (2005) Characterization of low temperature deposited nanolayered TiN/NbN multilayer coatings by cross-sectional transmission electron microscopy. Surface amp; Coatings Technology, 200 (14-15). pp. 4586-4593.
Barshilia, Harish C and Surya Prakasha, M and Jain, Anjana and Rajam, KS (2005) Structure, hardness and thermal stability of TiAlN and nanolayered TiAlN/CrN multilayer films. Vacuum, 77 . pp. 169-179.
Basu, Bharathibai J and Thirumurugan, A and Dinesh, AR and Anandan, C and Rajam, KS (2005) Optical oxygen sensor coating based on the fluorescence13; quenching of a new pyrene derivative. Sensors and Actuators B, 104 . pp. 15-22.
Bhaumik, SK and Sujata, M and Krishnan, RV (2005) Fatigue failure of engineering structures13;. Transactions of the Indian Institute of Metals, 58 (2-3). pp. 187-196.
Bhaumik, SK and Venkataswamy, MA and Bhaskaran, TA and Rangaraju, R and Sujata, M and Krishnan, RV (2005) Fatigue failure of a connecting rod of a piston engine. Transactions of the Indian Institute of Metals, 58 (2-3). pp. 423-430. ISSN 0019-493X
Chakrabartty, SK (2005) Role Of Computational Fluid Dynamics In The Design Of Aerospace Configurations. Journal of Aerospace Sciences amp; Technology, 57 (1). pp. 24-32. ISSN 0971-950X
Chattopadhyay, Lalitha (2005) Analytical solution for an orthotropic elastic plate containing cracks13;. International Journal of Fracture, 134 (3-4). pp. 305-317.
Ismail, Shaik and Singh, Jatinder (2005) Nonlinear aerodynamic global model indentification using Gram-Schmidt orthogonalisation13;. Journal of Aerospace Sciences and Technology, 57 (4). pp. 392-400. ISSN 0972-950X
Jade, S (2005) A commentary on scientific integrity. Current Science, 89 (6). pp. 921-922.
Jana, S and Arunkumar, V (2005) 5-Axes Levitation of a Rotor by Active Magnetic Bearings Employing Direct Output Feedback Control. Journal of Aerospace Sciences and Technologies . (Submitted)
Kidambi, R and Shankar, PN (2005) The effects of the contact angle on sloshing in containers. Proceedings of the Royal Society of London, 460 (2048). pp. 2251-2267. ISSN 1364-5021
Krishna, CN Sai and Ramaiah, KV and Bhaumik, SK (2005) Strain response of Ni-Ti-Cu shape memory alloy wires on thermo-mechanical cycling. Transactions of the Indian Institute of Metals, 58 (5). ISSN 0972-2815
Liermann, HP and Singh, AK and Manoun, B and Saxena, SK and Zha, CS (2005) Compression behavior of TaC0.98 under nonhydrostatic13; and quasi-hydrostatic pressures up to 76 GPa. International Journal of Refractory Metals and Hard Materials, 23 . pp. 109-114.
Mukherjee, Somenath and Jafarali, P and Prathap, Gangan (2005) A variational basis for error analysis in finite element elastodynamic problems. Journal of Sound and Vibration, 285 (3). pp. 615-635. ISSN 0022-460X
Naidu, VPS and Girija, G and Raol, JR (2005) Data association and fusion algorithms for13; tracking in presence of measurement loss. IE(I) journal-AS, 86 . pp. 17-28.
Nair, Manoj T and Kumar, Naresh and Saxena, SK (2005) Computational Analysis of Inlet Aerodynamics for a Hypersonic Research Vehicle. Journal of Propulsion and Power, 21 (21). pp. 286-291.
Narasimhan, SV and Hazarathaiah, M and Giridhar, PVS (2005) Channel blind identixFB01;cation based on cyclostationarity13; and group delay. Signal Processing, 85 . pp. 1275-1286.
Narasimhan, SV and Pavanalatha, S (2005) Estimation of evolutionary spectrum based on short time Fourier transform and modified group delay. Signal Processing, 84 (11). pp. 2139-2152. ISSN 0165-1684
Panda, PK and Sahoo, B (2005) Preparation of pyrochlore-free PMN powder by semi-wet chemical route. Materials Chemistry and Physics, 93 (1). pp. 231-236. ISSN 0254-0584
Parameswaran, V and Jategaonkar, RV and Press, M (2005) Five-Hole Flow Angle Probe Calibration from Dynamic and Tower Flyby Maneuvers. Journal of Aircraft, 42 (1). pp. 80-86. ISSN 0021-8669
Pichamuthu, JP (2005) Directional variation of visual range due to anisotropic atmospheric brightness. Applied Optics, 44 (8). pp. 1464-1468. ISSN 0003-6935
Rahul Kumar, C and Radhakrishna, K and Rao, RMVGK (2005) Postcuring effects on impact behavior of glass/epoxy composite laminates. Journal of Reinforced Plastics and Composites, 24 (9). pp. 949-960. ISSN 0731-6844
Raju, Channa and Viswanath, PR (2005) Pressure-Sensitive Paint Measurements in a Blowdown Wind Tunnel. Journal of Aircraft, 42 (4). pp. 908-915. ISSN 0021-8669
Rao, RR and Mariappan, L (2005) Combustion synthesis and characterisation of lanthanum hexa-aluminate13;. Advances in Applied Ceramics, 104 (5). pp. 268-271. ISSN 1743-6753
Sahoo, B and Jaleel, VA and Panda, PK (2005) Development of PZT powders by wet chemical method and13; fabrication of multilayered stacks/actuators. Materials Science and Engineering B, 126 (1). pp. 80-85. ISSN 0921-5107
Shankar, PN (2005) Axial eigenfunctions and inhomogeneous solutions for the three-dimensional Stokes system with an application to natural convection in a cylinder13;. Zeitschrift fur Angewandte Mathematik und Physik, 56 (2). pp. 254-272. ISSN 0044-2275
Shankar, PN (2005) Moffatt eddies in the cone. Journal of Fluid Mechanics, 539 . pp. 113-135. ISSN 0022-1120
Shankar, PN (2005) A new separation of variables method for complex geometries. Current Science, 88 (2). pp. 266-269. ISSN 0011-3891
Singh, AK and Akahama, Y and Kawamura, H and Menendez, PE and Gutierrez, G (2005) Nonhydrostatic compression of bismuth to 222 GPa: Some constraints on elasticity of the bcc-phase. Journal of Physics and Chemistry of Solids, 67 (9-10). pp. 2192-2196.
Singh, AK and Anjana, Jain and Liermann, HP and Saxena, SK (2005) Strength of iron under pressure up to 55 GPa from X-ray diffraction line-width analysis13;. Journal of Physics and Chemistry of Solids, 67 (9-10). pp. 2197-2202.
Srinathkumar, S (2005) Design of helicopter stability augmentation system using eigenstructure assignment and minimal order functional observers13;. Annual Forum Proceedings - AHS International, 2 (6). pp. 1170-1182.
Srivastava, Meenu and William Grips, VK and Rajam, KS (2005) Electrodeposition of Ni-Co alloys from sulphate bath. -, 58 (5). ISSN 0972-2815
Subramanya, HY and Viswanath, S and Narasimhan, R (2005) A three-dimensional numerical study of mixed mode (I and II) crack tip fields in elastic-plastic solids. International Journal of Fracture, 136 (1-4). pp. 167-185. ISSN 0376-9429
Sujata, M and Madan, M and Parameswara, MA and Venkataswamy, MA and Bhaumik, SK (2005) Failure analysis of main wheel hubs of an aircraft. Transactions of the Indian Institute of Metals, 58 (5). ISSN 0972-2815
Sundaram, R and Gupta, N and Rao, MS (2005) Structural health monitoring of co-cured composite structures using FBG sensors13;. Proceedings of the SPIE - The International Society for Optical Engineering, 5764 (1). pp. 559-570.
Suryanarayana, GK (2005) Vented circular cylinder as a vortex generator. Journal of Visualization, 8 (3). p. 197. ISSN 7
Venkatakrishnan, L (2005) Density measurements in an axisymmetric underexpanded jet by background-oriented schlieren technique. AIAA Journal, 43 (7). pp. 1574-1579. ISSN 0001-1452
Venkatesh, TN and Sarasamma, VR and Rajalakshmy, S and Sahu, Kirti Chandra and Govindarajan, Rama (2005) Super-linear speed-up of a parallel multigrid Navier-Stokes solver on Flosolver. Current Science, 88 (4). pp. 589-593.
William Grips, VK and Ezhil Selvi, V and Barshilia, Harish C and Rajam, KS (2005) Effect of electroless nickel interlayer on the electrochemical behavior of single layer CrN, TiN, TiAlN coatings and nanolayered TiAlN/CrN multilayer coatings prepared by reactive dc magnetron sputtering. Electrochimica Acta, 51 (17). pp. 3461-3468.