Browse by Type
Number of items: 26.
Anjana, Jain and Vijayan, Kalyani (2003) Thermal Aging of Twaron Fibers. High Performance Polymers, 15 . pp. 105-129.
Aruna, ST and Rajam, KS (2003) Synthesis, characterisation and properties of Ni/PSZ and Ni/YSZ nanocomposites. Scripta Materialia, 48 (5). pp. 507-512.
Balaraju, JN and Sankara Narayanan, TSN and Seshadri, SK (2003) Electroless Ni-P composite coatings. Journal of Applied Electrochemistry, 33 (9). pp. 807-816.
Barshilia, Harish C and Rajam, KS (2003) Deposition of TiN/CrN hard superlattices by reactive d.c. magnetron sputtering. Bulletin of Materials Science, 26 (2). pp. 233-237.
Barshilia, Harish C and Rajam, KS and Jain, Anjana (2003) Structure, hardness and thermal stability of nanolayered TiN/CrN multilayer coatings. Vacuum, 72 (3). pp. 241-248.
Basu, Bharathibai J and Anandan, C and Rajam, KS (2003) Study of the mechanism of degradation of pyrene-based pressure sensitive paints. Sensors and Actuators , B 94 . pp. 257-266.
Basu, Bharathibai J and Anandan, C and Rajam, KS (2003) Study of the mechanism of degradation of pyrene-based pressure sensitive paints. Sensors and Actuators, B: Chemical, 94 (3). pp. 257-266.
Chakrabartty, SK and Dhanalakshmi, K and Ramesh, V (2003) Navier-stokes analysis of GA(W)-2 aerofoil with deflected flap and redesign of Hansa flap for better performance. Computational Fluid Dynamics Journal, 12 (1). pp. 89-97. ISSN 0918-6654
Chattopadhyay, Lalitha (2003) Analytical determination of stress intensity factor for plate bending problems. International Journal of Computational Engineering Sciences., 4 (1). pp. 109-119. ISSN 1465-8763
Dasgupta, T and Bhattacharya, Anup K and Umarji, AM (2003) Synthesis and structure of aluminum substituted MoSi. Solid State Communications, 126 . pp. 573-578.
Dayananda, GN and Shankar, V (2003) The design of a Ni-Ti based shape memory alloy actuator. Journal of Aerspace Sciences & Technologies, 55 (4). pp. 268-274.
Iyer, RV and Sooryanarayana, K and Row, Guru TN and Vijayan, Kalyani (2003) Low temperature crystallographic data on Kevlar 49 fibres. Journal of Material Science, 38 . pp. 133-139. ISSN 0022-2461
Kodanda, B and Pai, BR (2003) HISTORY OF POWERED FLIGHT. Journal of Aerospace Sciences and Technology, 55 (4). pp. 289-302. ISSN 0972-950X
Krothapalli, A and Venkatakrishnan, L and Lourenco, L and Greska, B (2003) Turbulence and noise suppression of a high-speed jet by water injection. Journal of Fluid Mechanics, 491 . pp. 131-159. ISSN 1469-7645
Mudkavi, Vidyadhar Y (2003) Powered Hang Gliding. Resonance, 8 (12). pp. 50-60.
Mukherjee, C and Anandan, C and Seth, T and Dixit, PN and Bhattacharyya, R (2003) Photoconducting a-Si:H films grown at high deposition rates by pulsing a VHF 100 MHz discharge. Thin Solid Films, 423 (1). pp. 18-26.
Narasimhan, SV and Nayak, Malini B (2003) Improved Wigner-Ville distribution performance by signal decomposition and modified group delay. Signal Processing, 83 (12). pp. 2523-2538.
Parida, BK and Manjunatha, CM and Girish, HM (2003) Fatigue crack closure evaluation under constant amplitude and spectrum loading. Journal of Testing and Evaluation, 31 (4). pp. 337-346.
Pavan Kumar, DVTG and Raghu Prasad, BK (2003) Higher-Order Beam Theories for Mode II Fracture of Unidirectional Composites. Journal of Applied Mechanics, Transactions ASME, 70 (6). pp. 840-852.
Sengupta, TK and Kasliwala, A and De, S and Nair, Manoj T (2003) Temporal flow instability for Magnus - Robins effect at high rotation rates. Journal of Fluids and Structures, 17 (7). pp. 941-953.
Sengupta, TK and Kasliwala, A and De, S and Nair, Manoj T (2003) Temporal flow instability for Magnusx2013;Robins effect at high13; rotation rates. Journal of Fluids and Structures, 17 . pp. 941-953.
Seshadri, R (2003) Centrifugal force assisted combustion synthesis of intermetallics (NiAl). Materials and Manufacturing Processes, 17 (4). p. 1042.
Shankar, PN (2003) A simple method for studying low-gravity sloshing frequencies. Proceedings of the Royal Society of London, Series A: Mathematical, Physical and Engineering Sciences, 459 (2040). pp. 3109-3130. ISSN 1364-5021
Shankar, PN and Kidambi, R and Hariharan, J (2003) Oscillatory eddy structure in a container. Journal of Fluid Mechanics, 494 . pp. 163-185.
UdayaKumar, A and Vyjayanthi, N and Venu, PG and Kannan, TS and Narayana, R and Viswanath, S (2003) Weibull analysis of modulus of rupture of the slip-cast amorphous silica (SCAS) determined by the 4-point bending test. InterCeram: International Ceramic Review, 52 (2). pp. 90-94.
Venkatakrishnan, L and Elavarasan, R and Bhat, GS and Krothapalli, A and Lourenco, L (2003) Particle image velocimetry study of a cloud-like flow. Current Science, 85 (6). pp. 778-785. ISSN 0011-3905