Items where Subject is "ENGINEERING > Engineering (General)"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators Name | Item Type
Number of items at this level: 100.

Book / Book Chapter

Narasimhan, SV and Nandini, Basumallick and Veena, S (2011) Introduction to Wavelet Transform- A signal Processing approach. In: Introduction to Wavelet Transform- a Signal Processing approach. Narosa Publishing House, Delhi. ISBN 978-81-8487-081-7

Conference or Workshop Item

Acharya, Shrilatha and Ravishankar, S (2011) Customized CAD/CAM Data Management System for an Aircraft Development Programme. In: PLMSS-2011, 5th to 7th December 2011, Dept of Production Engineering, PSG College of Technology, Coimbatore, Tamil Nadu, India.

Chandranath, M and Raghavendra, and Suresh, R and Ravishankar, S (2014) Part Localization for CNC Machining Using Discrete Point Set Approach. In: International Conference On Trends in Product Life Cycle, Modeling, Simulation and Synthesis PLMSS-2014, 06-08 January 2014, Vellore, Tamil Nadu, India.

Gopinath, L and Ravishankar, S (2014) Assessment of Form Tolerances by Least Square Method. In: International Conference On Trends in product Life Cycle, Modeling, Simulation and Synthesis PLMSS-2014, 06-08 January 2014, Vellore, Tamil Nadu, India.

Gopinath, L and Ravishankar, S (2014) Influence of Peripheral Milling on Machining of Aircraft Grade Aluminum Alloy. In: International Conference On Trends in Product Life Cycle, Modeling, Simulation and Synthesis PLMSS-2014, 06-08 January 2014, Vellore, Tamil Nadu, India.

Jeyaseelan, AR and Poornima, N and Senthil Kumaran, R (2012) A Wireless Multichannel Pressure Measurement System for a Rotating Turbo machinery Rig. In: National Symposium on Instrumentation (NSI-37), CSIR-CSIO, Chandigarh.

Kamath, GM and Karthikeyan, G (2001) Active control of structures using impedance control method. In: ICTACEM 2001: Second International Conference on Theoretical, Applied, Computational and Experimental Mechanics, 27-30 Dec 2001, Kharagpur, India.

Kodanda, B and Ashish, Verma (2011) Estimation of Origin-Destination Air Traffic Flows from Air Transport Movement Data: An Application to Indian Domestic Airport Network System. In: 2011 World Conference of Air Transport Research Society (ATRS 2011), June 29-July 2, 2011, School of Aviation, University of New South Wales (UNSW), Sydney, Australia.

Kodanda, B and Selvaraj, R (2003) Advances in Aircraft Engines since 1903. In: 100 Years since First Powered Flight (International Seminar) and Avances in Aerospace Sciences (Technical Seminar) & AeSI-55th AGM, December 2003, Bangalore.

Naidu, VPS and Garlin, Delphina (2011) Assessment of Color and Infra-Red Images using No-Reference Image Quality Metrics. In: Proceedings of NCATC 2011 .

Naidu, VPS and Rao, Narayana P and Sudesh, K Kashyap and Shantha Kumar, N and Girija, G Experimental Study with Enhanced Vision System Prototype Unit. In: International Conference on Image Information Processing (ICIIP)-2011, 3-5 November , Shimila. (Submitted)

Nitin, V Kamath and Sudesh, K Kashyap and Shantha Kumar, N Automatic Target Recognition using Invariant Target Features and Statistical Classifier. In: International conference on innovative science and engineering technology, 8-9 April 2011, VVP Engineering College, Rajkot, Gujarat, India.

Raghavendra Rao, S and Manyam Kothapalli, S.R.S and Ravishankar, S (2014) Study of Bend Angle Allowance for Sheet Metal Forming in Aerospace Industry. In: International Conference on Trends in Product Life Cycle, Modeling Simulation and Synthesis PLMSS-2014, 6th to 8th January 2014, Vellore Institute of Technology, Vellore, TamilNadu, India.

Rao, Narayana P and Sudesh, K Kashyap and Naidu, VPS and Shantha Kumar, N and Girija, G (2011) An experiment on enhanced and synthetic vision system. In: Annual Seminar in Hindi, 10th August 2010, NAL.

Sajjan, Sharanappa V and Savanur, RA and Mudkavi, Vidyadhar Y (2009) CFD Analysis of 500 kW Horizontal-Axis Wind Turbine Blades: Straight and Bent Cases. In: 11th Annual CFD Symposium 11th − 12 th August 2009, Bangalore.

Singh, Jatinder and Saraf, Amitabh and Patel, Vijay and Basappa, - and Tharewal, Sachin (2011) Application on system identification techniques to Tejas flight test data. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.

Singh, Manish K and Ramesh, V and Mathur, JS and Deshpande, SM (2007) Eigen direction based weighted low dissipation grid-free method. In: Proceedings of the Engineering Design, 9-11 Aug 2007, Bangalore, India.

Sridhara, K and Paranjpe, PA (1976) Operational behaviour of a turboprop engine. In: 3rd International Symposium on Air Breathing Engines, 7-12 Mar 1976, Munich, West Germany.

Sunder, R (1990) Automated fatigue and fracture laboratory with multiple load frames and single host computer system 13; 13;. In: Applications of automation technology to fatigue and fracture testing; Proceedings of the Symposium, 22-23 May 1989, Kansas City, United States.

Sunder, R and Prakash, Raghu V (1994) Study of fatigue crack growth in lugs under spectrum loading. In: 3rd ASTM Symposium on Advances in Fatigue Lifetime Predictive Techniques, 16-17 May 1994, Montreal, Quebec.

Veera Sesha Kumar, C and Ramachandra, HV and Varughese, Byji and Kotresh, Gaddikeri M and Ramesh, Sundaram and Subba Rao, M (2006) Damage Growth Studies on Composite Flap Structures Under Fatigue Loading. In: XIV National Seminar on Aerospace Structures, 30-31 January 2006, Visvesvaraya National Institute of Technology, Nagpur.

Journal Article

Adiga, BS and Shankar, P (1986) Fast public key cryptosystem based on matrix rings. Electronics Letters, 22 . pp. 1182-1183.

Aruna, ST and Diwakar, S and Jain, A and Rajam, KS (2005) Comparative study on the effect of current density on Ni and Ni-Al2O3 nanocomposite coatings produced by electrolytic deposition13;. Surface Engineering, 21 (3). pp. 209-214.

Barshilia, Harish C and Rajam, KS (2005) A Raman-scattering study on the interface structure of nanolayered TiAlN/TiN and TiN/NbN multilayer thin films grown by reactive dc magnetron sputtering. Journal of Applied Physics, 98 (1). 014311-1.

Basu, AJ and Narasimha, R and Prabhu, A (1995) Modelling plane mixing layers using vortex points and sheets. Applied Mathematical Modelling, 19 (2). pp. 66-75.

Dutta, Soma (2008) Design and simulation of optimum piezoelectric MEMS microactuator for smart control applications. Indian Journal of Engineering and Materials Sciences, 15 (2). pp. 99-103. ISSN 0971-4588

Gupta, Nitant and Sasikala, S and Mahadik, DB and Rao, AV and Barshilia, Harish C (2012) Dual-scale rough multifunctional superhydrophobic ITO coatings prepared by air annealing of sputtered indium tin alloy thin films. Applied Surface Science, 258 . pp. 9723-9731. ISSN 0042-207X

Gupta, Nitesh and Ramesh, Sundaram (2009) Fiber Optic Sensors for Monitoring Flow in Vacuum Enhanced Resin Infusion Technology VERITy Process. Composites Part A: applied Science and Manufacturing, 40 . pp. 1065-1070. ISSN 1359-835X

Guruprasad, R and Marimuthu, P (2014) E-Journals Download Patterns using Web Log Analysis of Selected Publishers among the Aerospace Organizations of Bangalore: A Research Study. Global Journal of Research in Engineering, 14 (1, 1.0). pp. 35-49. ISSN Print: 0975-5861, Online: 2249-4596

Kodanda, B (2009) An Approach for Quick Method of Estimating Passenger and Aircraft Demand for Feeder Air Services in India. Journal of Aerospace Sciences and Technology, 61 (4). pp. 504-518. ISSN 0972-950X

Kodanda, B (2008) Feeder and Short haul air transport systems: Current issues related to infrastructure development for sustainability of Civil Aviation growth in India. Aerospace Engineering Journal, 89 . pp. 15-28. ISSN 0257-3423

Kumar P, Arun and Verma, SB and Elangovan, S (2011) Study of jets from rectangular nozzles with square grooves. Aeronautical Journal, 115 (1165). pp. 187-196. ISSN 0001-9240

Manjunatha, C.M. and Ramesh , Bojja and Jagannathan, N and Kinloch, A.J. and Taylor, A.C. (2013) Enhanced fatigue behavior of a glass fiber reinforced hybrid particles modified epoxy nanocomposite under WISPERX spectrum load sequence. International Journal of Fatigue, 54 . pp. 25-31. ISSN 0142-1123

Manjunatha, CM and Ramesh , Bojja and Jagannathan, N Fatigue Behavior of a Nanocomposite Under a Fighter Aircraft Spectrum Load Sequence. Journal of Nano Research, 24 . pp. 58-66. ISSN 1661-9897

Manohar, LC and Muthuvel, S (1989) A fiberoptic LAN for aircraft and other applications. Journal of Institution of Engineers, 69 . pp. 10-12.

Manoharan, LC and Chandrashekar, KR and Muthuvel, S (1986) Bit rate/bit error rate monitor. Journal of the Institution of Engineers, India, 66 . pp. 52-54.

Mnajunatha, CM and Jagannathan, N and Padmalatha, K and Kinloch, AJ and Taylor, AC (2011) The Effect of Micron-Rubber and Nano-Silica Particles on the Fatigue Crack Growth Behavior of an Epoxy Polymer. International Journal of Nanoscience, 10 (4&5). pp. 1095-1099. ISSN 0219-581X

Mnajunatha, CM and Jagannathan, N and Padmalatha, K and Kinloch , AJ and Taylor , AC (2011) Improved variable-amplitude fatigue behavior of a glass-fiber-reinforced hybrid-toughened epoxy composite. Journal of Reinforced Plastics &Composites, 30 (21). pp. 1783-1793.

Naidu, VPS (2012) Discrete Cosine Transform based Image Fusion Techniques. Journal of Communication, Navigation and Signal Processing, 1 (1). pp. 35-45.

Narasimhan, SV and Hazarathaiah, M and Giridhar, PVS (2005) Channel blind identixFB01;cation based on cyclostationarity13; and group delay. Signal Processing, 85 . pp. 1275-1286.

Prathap, Gangan and Varadan, TK (1986) Inelastic post-buckling of columns. Journal of Applied Mechanics, 53 (3). pp. 719-721.

Raghu Prasad, BK and Pavan Kumar, DVTG (2008) Analysis of composite ENF specimen using higher order beam theories. Thin-Walled Structures, 46 (6). 676 -688.

Ramesh Babu, C and Prathap, Gangan (1986) Linear thick curved beam element. International Journal for Numerical Methods in Engineering, 23 (7). pp. 1313-1328. ISSN 0029-5981

Rao, KVL and Lefebvre, AH (1975) Fuel atomization in a flowing airstream (for turbofan engines). AIAA Journal, Vol.13 . pp. 1413-1415. ISSN 0001-1452

Rao, MNB and Murthy, MVV (1977) Stress concentration around an elliptic hole in a cylindrical shell under torsion with major axis of the hole perpendicular to the shell axis. Journal of Applied Mechanics, Vol. 4 . pp. 184-186.

Ravichandran, KS (1997) Higher Order KFVS Algorithms Using Compact Upwind13; Difference Operators. Journal of computational physics, 130 . pp. 161-173.

Saijal , KK and Ganguli, Ranjan and Viswamurthy , SR (2011) Optimization of Helicopter Rotor Using Polynomial and Neural Network Metamodels. Journal of Aircraft, 48 (2). pp. 553-566. ISSN 0021-8669

Sateesh, VL and Senthilkumar, P and Satisha, Vishwanath and Dayananda, GN (2014) A posteriori processing for estimation of low cycle fatigue failure in SE SMA wires. Materials Science and Engineering A, 594 . pp. 212-217. ISSN 0921-5093

Siva Kumar , K and Sajjan, Sharanappa V (2013) Three-dimensional Unsteady Flow over a Heaving Rectangular Wing. Frontiers in Aerospace Engineering, Volume (Issue ). pp. 199-206. ISSN 2325-6796

Sujata, M and Jagannathan, N and Raghavendra, K and Manjunatha, CM and Bhaumik, SK (2013) Fatigue Fracture of a Compressor Disc of an Aeroengine. Journal of Failure Analysis and Prevention . pp. 1-8.

Thulasi Durai, D and Viswamurthy , SR and Balasubramani, S and Rohit, C and Dayananda, GN (2010) Grid based construction of a composite micro air vehicle airframe. Journal of Aerospace Sciences and Technologies, 62 (2). pp. 132-140. ISSN 1735-2134

Vaitheeswaran, SM and Narasimhan, SV (2008) Stencil coefficient computations for the multiresolution time domain method - A filterbank approach. Progress in Electromagnetics research-PIER, 81 . pp. 149-166.

Proj.Doc/Technical Report

Aruna, HM and Guruprasad, K and Murthy, MVV (1985) Finite element Analysis of MiG-21 Rudder. Project Report. National Aerospace Laboratories, Bangalore.

Balakrishna, S and Niranjana, T (1987) A Low Speed Tunnel Semi Free Dynamic Flying Study of Pitching Derivatives of LCA Delta-5 in Active Control using MLE Procedure. Project Report. National Aerospace Laboratories, Bangalore.

Bera, Rajendra K (1989) Engineering education and training initiatives for the 1990s. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Bhagawan, BS and Parameswaran, V and Rajeswari, Ramamurthy and Sridhar, JK and Srinatha Sastry, CV and Ramabhadran, S and Seshadri, SN and Sundaramurthy, H and Yegnanarayan, K (1985) Stability and Control characteristics of MIG-21 aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Bisoyi, Sanjana and Choudhury, Balamati and Jha, RM (2012) Soft Computing Techniques for Metamaterial: A Cross-indexed Bibliography (2003-2012). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Chandrashekar, KR and Muthuvel, S and Manoharan, LC (1984) Fibre optics for analog applications. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Damania, RB (1986) concept study for a 80% scaled Derivative LCA. Project Report. National Aerospace Laboratories, Bangalore.

Janardhan, S and Ramachandran Nair, KN (1977) Use of B-splines and householder transformations for curve fitting. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Jategaonkar, RV and Murthy, NN and Srinathkumar, S (1986) Aircraft parameter estimation control and simulation (APES) computer: an Evaluation of quotations. Project Report. National Aerospace Laboratories, Bangalore.

Jatinder, Singh and Jategaonkar, RV and Hamers, M (2000) EC 135 Rotorcraft System Identification - Estimation of Rigid Body and Extended Models from Simulated Data. Project Report. National Aerospace Laboratories, Bangalore.

Joshi, A and Somashekar, BR (1988) Effect of initial curvature on the panel flutter. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Joshi B, Shamala and Narayan, Shiv and Nair, RU and Jha, RM (2012) A Review of the Techniques for EM Analysis of Conformal FSS Structures. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Kanakamuthu, - (2003) Wind and Solar Resource Studies at Kanyakumari. Project Report. National Aerospace Laboratories, Bangalore.

Karunakar, K and Murthy, NN and Niranjana, T and Rajan, SR and Shyam Chetty, and Padma, Madhuranath and Shylaja, G Prasad (1987) Design and simulation of a Digital Combat Flap controller for a fighter Aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Kashyap, SK and Raol, JR (2005) Unification and interpretation of fuzzy set operations. Technical Report. National Aerospace Laboratories, Bangalore, India.

Kodanda, B (2007) An Analysis and Quick Method of Estimating Passenger and Aircraft Demand for Feeder Airline Services in India. Project Report. CSIR-National Aerospace Laboratories, Bangalore.

Krishnamurthy, K and Dasannacharya, BS and Indira, Rajagopal (1986) Process for Manufacture of Foil Resistance Strain Gauges. Project Report. National Aerospace Laboratories, Bangalore.

Madhuranath, Padma (1987) Acoustics of reverberation chamber test facility. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Madhuranath, Padma and Sridhar, JK (1988) Flight simulation of HS-748 with and without rotodome Part 1- mathematical modelling and data. Project Report. National Aerospace Laboratories, Bangalore.

Madhuranath, Padma and Viswanathan, R and Muralidas, S (1980) A survey of the acoustic features of the auditorium in the Systems building. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Maharana, RK and Dubey, Satya Kesh and Jha , RM (2012) Stripline Method for EM Material Characterization. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Manickam, Sangeetha and Choudhury, Balamati and Jha , RM (2012) Emerging Trends in Soft Computing Techniques for Metamaterial Design and Optimization: A Review. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Mohan Ram, VS (1985) Parameter Identification of a Surface-to-Surface Missile from Flight Test Data. Project Report. National Aerospace Laboratories, Bangalore.

Mohan Ram, VS and Srinath Sastry, CV (1985) Post Flight Missile Parameter Identification for aeroballistic range. Project Report. National Aerospace Laboratories, Bangalore.

Muthuvel, S and Manoharan, LC (1987) Versatile digital unidirectional fiberoptic active coupler. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Padma, Madhuranath and Sridhar, JK (1988) Flight simulation of HS -748 with and without rotodome Part 1 - Mathematical modelling and Data. Project Report. National Aerospace Laboratories, Bangalore.

Parameswaran, V and Girija, G (1988) Estimation of Stability and Control Derivatives of HS 748 Aircraft from Flight Data by Maximum Likelihood Method. Project Report. National Aerospace Laboratories, Bangalore.

Parameswaran, V and Girija, G (1987) Flight Test Specifications and Preliminary data Analysis for Parameter Identification of HS 748 Aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Parameswaran, V and Girija, G and Raol, JR (1985) Specification of flight test maneuvers for identification experiments on a Jaguar aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Parameswaran, V and Niranjana, UC and Raol, JR (1988) Estimation of states of aircrafts by kalman filtering algorithms. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Prakash, S (1992) Literature Review of Methodology and Test Facilities for Design and Testing of Composite Wind Turbine Blades. Technical Report. National Aerospace Laboratories, Bangalore, India.

Rajanna, D and Dhruva , Rao (1987) Airworthiness Test Report on NAL G-Meter (Supplement). Project Report. National Aerospace Laboratories, Bangalore.

Ramamoorthy, P (1985) Some aspects of engineering software activity (ESA)in fluid and thermal sciences at NAL. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Rameshbabu, C and Prathap, Gangan (1985) A linear thick curved beam element. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Rangan, CS and Rajanna, D and Prathapan, T and Dhruwa Rao, NS (1985) Development of G-Meter for the investigation of fatigue life of aircrafts. Project Report. National Aerospace Laboratories, Bangalore.

Rao, Govinda TV and Chandrashekar, C and Shivashankar, N (1986) Design and fabrication of floor grid structure for the test rig of component test facility. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Rao, Venkat U (1986) 3D co-ordinate measuring machine. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Raol, JR and Girija, G and MohanRam, VS (1988) Estimation of Aerodynamic Derivatives of Missiles from Range and Simulated Data Using Nonlinear Maximum Likelihood Method. Project Report. National Aerospace Laboratories, Bangalore.

Renukadevi, M and Murali, S and Viswanathan, R (1984) A statistical analyser for noise signals. Technical Report. National Aeronautical Laboratory, Bangalore, India.

SED, - (1986) Annual Ramp;D report for 1985 of systems engineering division. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sankar, N and Chinmayee madhavan, -- and Dasannacharya, BE and Rajann, D (1984) Friction and wear monitoring system. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Shah, CG and Nagesh, KS (1989) Static Analysis of Rotodomed Aircraft Using ASKA - Vertical Gust Load Case (Vg). Project Report. National Aerospace Laboratories, Bangalore.

Shiv, Narayan and Arun, K and Jha , RM (2012) EM Performance Analysis of Tri-layer Metamaterial FSS for Radome Applications. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Sridhara, K and Thunga, KS (1974) Design and development of a cold air turbine. Technical Report. National Aerospace Laboratories, Bangalore,India.

Suseela, GR and Ramachandra, HV and Balasubramanian, TS and Madhava, MR (1994) NALLA-2 : Strain measurements. Project Report. National Aerospace Laboratories, Bangalore.

Suseela, GR and Sridhara, S and Seetharam, SA and Madhava, MR (1994) NALLA2: Adhesive bond quality evaluation. Project Report. National Aerospace Laboratories, Bangalore.

Venkatachalam, K and Krishnan, A and Rangarajan, V and Rajagopalan, E and Subba Rao, M and Haque, CI and Mohan, KH (1990) Draft proposal for establishment of CNC centre at NAL. Project Report. National Aerospace Laboratories, Bangalore.

Wind Energy Programme, - (1991) Wind velocity data at two locations on kappata hills, Gadag, Karnataka period: Jan-Dec 1990. Technical Report. National Aerospace Laboratories, Bangalore, India.

This list was generated on Fri Aug 22 01:03:52 2014 IST.