Items where Subject is "CHEMISTRY AND MATERIALS > Nonmetallic Materials"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: B | C | D | G | I | K | L | M | P | R | S
Number of items at this level: 24.

B

Barshilia, Harish C and Rajam, KS (2004) Nanoindentation and atomic force microscopy measurements on reactively sputtered TiN coatings. Bulletin of Materials Science, Vol. 2 (No. 1). pp. 35-41.

Bhaumik, SK and Divakar, C and Ushadevi, S and Singh, AK (1999) Synthesis and sintering of SiC under high pressure and high temperature. Journal of Materials Research, 14 (3). pp. 906-911. ISSN 0884-2914

Bhaumik, SK and Singh, AK (1993) Polycrystalline cubic boron nitride (PCBN) cutting tools. Technical Report. National Aerospace Laboratories, Bangalore, India.

Bhovi, PM and Patil, DC and Kori, SA and Venkateswarlu, K and Huang, Y and Langdon, TG (2016) A comparison of repetitive corrugation and straightening and high-pressure torsion using an Al-Mg-Sc alloy. Journal of Materials Research and Technology, 5 (4). pp. 353-359. ISSN 22387854

C

Chembath, M and Balaraju, JN and Sujata, M (2016) Effect of anodization and annealing on corrosion and biocompatibility of NiTi alloy. Surface and Coatings Technology, 302. pp. 302-309. ISSN 02578972

Chowdhury, P (2012) Development of magnetoresistive thin film sensor for magnetic field sensing applications. In: 57th DAE Solid state Physics Symposium, 3 Dec 2012, IIT, Mumbai.

Chowdhury, P and Thomas, Ann Nimmy and Sharma, Megha and Barshilia, Harish C (2014) Facile approach for in situ measurement of anode temperature during the growth of self-ordered nanoporous anodic alumina thin films: Influence of Joule heating on pore microstructure. Electrochemica Acta, 115. pp. 657-664.

D

Dutta, Soma and Jeyaseelan, Antony and Sabina, JEJ and Shubha, V (2010) Insitu piezoceramic coating for acouso ultrasonic testing. In: National Conference on Microsystems, Smart Materials, Structures: ISSS 10, Sept. 2010, Visvesvaraya National Institute of Technology, Nagpur, India.

G

Gnanavel, S and Ponnusamy, S and Mohan, L and Radhika, R and Muthamizhchelvan, C and Ramasubramanian, K (2018) Electrochemical Behavior of Biomedical Titanium Alloys Coated with Diamond Carbon in Hanks’ Solution. Journal of Materials Engineering and Performance, 27 (4). pp. 1635-1641. ISSN 10599495

Gopalakrishnan, PS and Lakshminarasimham, PS (1995) Preparation and nitridation of silicon whiskers. Journal of Materials Science Letters, 14 (1). pp. 31-32. ISSN 0261-8028

I

Iyer, Vasudevan R and Vijayan, Kalyani (1994) Effect of thermal exposure on the relative intensities of reflections from Kevlar fibres. Technical Report. National Aerospace Laboratories, Bangalore, India.

K

Kannan, TS and Panda, PK and Jaleel, VA (1997) Preparation of pure boehmite, alpha-Al2O3 and their mixtures by hydrothermal oxidation of aluminium metal. Journal of Materials Science Letters, 16 (10). pp. 830-834. ISSN 0261-8028

Kulkarni, PD and Krishnan, M and Barshilia, Harish C and Chowdhury, P (2012) Effect of Pt layer thickness on perpendicular magnetic anisotropy in ultrathin Co/Pt Multilayers. In: 57th DAE Solid State Physics Symposium, 3 Dec 2012, IIT Mumbai.

L

Lakshminarasimham, PS and Gopalakrishnan, PS (1995) Bulk oxygen in alpha-silicon nitride and its effect on IR absorption. Journal of Materials Science Letters, 14 (24). pp. 1801-1803. ISSN 0261-8028

M

Mohan, L and Viswanathan, S and Anandan, C and Rajendran, N (2015) Corrosion behaviour of tetrahedral amorphous carbon (ta-C) filled titania nano tubes. RSC Advances, 5 (113). pp. 93131-93938. ISSN 20462069

P

Panda, PK and Sahoo, B (2012) Preparation and characterization of barium titanate nanofibers by electrospinning. Ceramic International, 38 (6). pp. 5189-5193.

Panda, PK and Sahoo, B (2005) Preparation of pyrochlore-free PMN powder by semi-wet chemical route. Materials Chemistry and Physics, 93 (1). pp. 231-236. ISSN 0254-0584

R

Ramachandran, BE and Pai, BC and Balasubramanian, N (1979) Electrical resistivity studies on acid-treated E-glass fabric. Journal of Materials Science, 14. pp. 1572-1578. ISSN 0022-2461

Ramachandran, BE and Pai, BC and Balasubramanian, N (1980) Studies on the structural stability of high silica fabric. Materials Science and Engineering, 43. pp. 199-201.

Rao, Ramachandra R and Kannan, TS (2002) Nitride-bonded silicon nitride from slip-cast Si + Si3N4 compacts. Journal of Materials Research, 17 (2). pp. 386-395. ISSN 0884-2914

S

Sastry, PU and Mishra, PK and Krishnan, M and Chowdhury, P and Ravikumar, G (2012) High coercivity through texture formation in SmCo5/Co multilayers. In: 57th DAE Solid State Physics Symposium, 3 Dec 2012, IIT Mumbai.

Shubha, M and Parimala, HV and Vijayan, Kalyani (1993) Moisture uptake by kevlar fibres. Journal of Materials Science Letters, 12 (1). pp. 60-62. ISSN 0261-8028

Singh, AK and Kennedy, GC (1977) Compressions of Si, MgO, and ZrSiO4 to 8 GPa as measured with a WC-anvil X-ray apparatus and epoxy pressure medium. Journal of Applied Physics, 48 (8). pp. 3362-3367. ISSN 0021-8979

Srihari, Shylaja and Rao, RMVGK (1999) Hygrothermal characterisation and diffusion studies on glass epoxy composites 13; 13;. Journal of Reinforced Plastics and Composites, 18 (10). pp. 942-953. ISSN 0731-6844

This list was generated on Tue Aug 4 04:17:06 2020 IST.