Items where Subject is "CHEMISTRY AND MATERIALS > Metals and Metallic Materials"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators Name | Item Type
Jump to: A | B | C | D | G | J | K | L | M | N | P | R | S | U | V
Number of items at this level: 88.

A

Anandan, K and Dash, PK and Brahma, KK (1989) Fatigue crack growth behaviour of aluminium lithium alloy. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Anandan, K and Dash, PK and Brahma, KK (1990) Fatigue crack growth behaviour of aluminum-lithium alloy. In: 4th International Conference on Fatigue Thresholds, 15-20 Jul 1990, Honolulu, United States.

B

Balaraju, JN (2013) Assessment of chromate and chromate-free conversion coatings for the corrosion protection of aerospace aluminum alloy. In: Workshop on Advanced Materials and Manufacturing Methods, 06 Feb 2013, NIT Trichy.

Balaraju, JN and Ezhil Selvi, V and William Grips, VK and Rajan, KS (2006) Electrochemical studies on electroless ternary and quaternary Nix20P based alloys. Electrochimica Acta, 52 (3). pp. 1064-1074. ISSN 0013-4686

Balasingh, C and Devi, S Usha and Singh, AK (1992) Residual Stresses in Control Stretched Aluminium Copper Alloy Extrusions. Technical Report. National Aerospace Laboratories, Bangalore, India.

Barshilia, Harish C and Deepthi, B and Prabhu, ASA and Rajam, KS (2006) Superhard nanocomposite coatings of TiN/Si3N4 prepared by reactive direct current unbalanced magnetron sputtering. Surface amp; Coatings Technology, 201 (1-2). pp. 329-337.

Baskaran, TA and Krishnan, RV (1983) Phase transformation studies in a titanium-copper alloy. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Bhaumik, SK and Reddy, AV (2010) Fatigue failure of aircraft components. In: International Winter School on Advances in Aeronautical Materials and Technologies, 15-19, Dec 2010, Hyderabad, India.

Bhaumik, SK and Sujata, M and Krishnan, RV (2005) Fatigue failure of engineering structures13;. Transactions of the Indian Institute of Metals, 58 (2-3). pp. 187-196.

Bhaumik, SK and Venkataswamy, MA and Bhaskaran, TA and Rangaraju, R and Sujata, M and Krishnan, RV (2005) Fatigue failure of a connecting rod of a piston engine. Transactions of the Indian Institute of Metals, 58 (2-3). pp. 423-430. ISSN 0019-493X

C

Chatterjee, A and Singh, AK and Jayaraman, A and Bucher, E (1971) Pressure-induced 4f-5d electron collapse in ytterbium monotelluride. Physical Review Letters, 27 (23). pp. 1571-1573.

Chowdhury, P and Boominatha Sellarajan, S and Krishnan, M and Raghuvaran, K and Barshilia, Harish C and Rajam, KS (2012) In Situ Electrochemical Thinning of Barrier Oxide Layer of Porous Anodic Alumina Template. Advanced Science Letters, 4 (20). pp. 1-5. ISSN 1936-6612

D

Divakar, C and Singh, AK (1991) Measurement of ultrasonic wave velocity in a solid under gas pressures upto 0.4 GPa. Bulletin of Material Science, 14 ( I). pp. 65-70.

Dubois, J and Murat, M and Amroune, A and Carbonneau, X and Gardon, R and Kannan, TS (1998) High-temperature carboreduction of kaolins of different crystallinity. Applied Clay Science, 13 (1). pp. 1-12.

Dutta, Soma and Jeyaseelan, Antony and Sabina, JEJ and Shubha, V (2010) Insitu piezoceramic coating for acouso ultrasonic testing. In: National Conference on Microsystems, Smart Materials, Structures: ISSS 10, Sept. 2010, Visvesvaraya National Institute of Technology, Nagpur, India.

Dutta, Soma and Shubha, V (2010) Non destructive acousto ultrasonic Method for structural health monitoring --- A review. Project Report. National Aerospace Laboratories, Bangalore, India.

G

Giridhar, A and Mahadevan, Sudha (2000) Macroscopic Characteristics of Chalcogenide Glasses13;. Technical Report. National Aerospace Laboratories, Bangalore,India.

Giridhar, A and Mahadevan, Sudha (1989) Preliminary Characterisation of Some13; Cd-Ge-As Glasses. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Giridhar, A and Mahadevan, Sudha (2000) Studies on Some Cu-Ge-As-Se Glasses. Technical Report. National Aerospace Laboratories, Bangalore, India.

Giridhar, A and Mahadevan, Sudha (2001) Synthesis and Characterisation of SnX(As0.4Se0.3Te0.3),00.X13; Glasses. Technical Report. National Aerospace Laboratories, Bangalore,India.

Gopalakrishnan, PS and Lakshminarasimham, PS (2003) Preparation of Fibrous Silicon Carbide and its Evaluation. Technical Report. National Aerospace Laboratories, Bangalore, India.

Gupta, Nitant and Sasikala, S and Barshilia, Harish C (2012) Corrosion study of superhydrophobic magnesium alloy AZ31 surfaces prepared by wet chemical etching process. Nanoscience and Nanotechnology letters, 4 (8). pp. 757-765. ISSN 1941-4900

J

Jothi, S and Venkateswarlu, K and Jainshe, L (2009) Dry Sliding Wear Properties of a 7075-T6 Aluminum Alloy Coated with Ni-P (h) in Different Pretreatment Conditions. Journal of Materials Engineering and Performance . ISSN 1059-9495

K

Kamath, GM and Dayananda, GN and Senthilpriya, R (2002) A modified thermo-mechanical modeling approach for shape memory alloy behaviour13;. In: Proceedings of SPIE - The International Society for Optical Engineering, 12-14 Dec 2002, Bangalore, India.

Kamath, GM and Dayananda, GN and Senthilpriya, R (2002) A modified thermomechanical modeling approach for shape memory alloy behaviour. In: Conference on Smart Materials, Structures and Systems, 12-14 Dec 2002, Bangalore, India.

Krishnan, RV and Bhaumik, SK (2002) Shape memory alloys - Properties and engineering applications. In: Conference on Smart Materials, Structures and Systems, 12-14 Dec 2002, Bangalore, India.

L

Lakshminarasimham, PS and Gopalakrishnan, PS (1995) Bulk oxygen in a-silicon nitride and its effect on IR absorption. Journal of Materials Science Letters, 14 (24). pp. 1801-1803.

M

Mahadevan, Sudha and Giridhar, A (1999) Silver as an additive in the As40Se30Te40 Glass. Technical Report. National Aerospace Laboratories, Bangalore,India.

Manohara, HR and Chandrashekharalah, TM and Venkateswarlu, K and Kori, SA (2013) Sliding wear performance of reinforced A413 alloy at elevated temperatures. International Journal of Advanced Manufacturing Technology, 65 . pp. 395-402. ISSN 1068-1086

Mohan, Murali (1987) Report on participation in the spring college in Materials Science on quot;Metallic Materialsquot; at Trieste, Italy. Technical Report. National Aeronautical Laboratory, Bangalore, India.

N

Ningaiah, -- and Venkatasuramanyam, DV (1976) Mechanical design aspects of a large rotating arm serve controled filament winding machine. Technical Report. National Aeronautical Laboratory, Bangalore,India.

P

Pichamuthu, JP (2005) Directional variation of visual range due to anisotropic atmospheric brightness. Applied Optics, 44 (8). pp. 1464-1468. ISSN 0003-6935

Prakash, M.Rajendra and Rao, RMVGK (2003) NDT report on Hansa-3 (VT- HNW) aircraft Components. Project Report. National Aerospace LAboratories, Bangalore.

Prakash, M.Rajendra and Srihari, Shylaja and Kavitha, and Vanaja, A and Revathi, A and Rao, Sandhya and Rao, RMVGK (2003) A report on Industrial test services under the COMPAC program from 2002-2003. Project Report. National Aerospace LAboratories, Bangalore.

Prasad, Ananth and Sridhar, MK (1988) Slip casting of silicon carbide. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Prathap, Gangan (1993) A complete, correct and consistent variational basis for the displacement type finite element method. In: Recent advances in aerospace sciences and engineering; Proceedings of the International Symposium, 12-15 Dec 1992, Bangalore, India.

R

Raja, S and Sinha, PK and Prathap, Gangan and Dwarakanathan, D (2004) Influence of active stiffening on dynamic behaviour of13; piezo-hygro-thermo-elastic composite plates and shells. Journal of Sound and Vibration, 278 . pp. 257-283.

Rajagopal, Indira and Rajagopalan, SR (1990) Studies on electrolytically coloured aluminium. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Rajagopal, Indira and Rajam, KS and Rajagopalan, SR (1990) Studies on black nickel. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Rajagopal, Indira and William Grips, VK and Rajagopalan, SR (1990) Studies on black Chromium. Part 1 - Preparation and characterisation of black chromium. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Ramachandran, V and Abrahamson, EP (1982) Processing and deformation studies on ultrafine grained titanium. In: Titanium and titanium alloys: Scientific and technological aspects., New York.

Raman, PS (1985) Physico chemical analysis of used hydraulic oil SS 311,and the hose pipe carrying the above oil of the new fatigue test rig. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Ramani, Geetha and Divakar, C and Singh, AK (1987) Thermoelectric power of barium up to 8 GPa. Physics Review B, 35 (3). pp. 1440-1441.

Ramasesha, Sheela K and Rao, Radhika MV and Singh, AK and Umarji, AM (1996) Lowering of relaxor transition temperature in lead-based perovskites under pressure. Electrochimica Acta, 41 (17). pp. 1141-1147.

Ramasesha, Sheela K and Singh, AK (1990) Pressure dependence of thermoelectric power of high Tc 123 compound. Technical Report. National Aeronautical Laboratory, Bangalore, India.

S

Sahoo, B and Jaleel, VA and Panda, PK (2005) Development of PZT powders by wet chemical method and13; fabrication of multilayered stacks/actuators. Materials Science and Engineering B, 126 (1). pp. 80-85. ISSN 0921-5107

Samiullah, TH and Rao, RMVGK (2003) Fabrication of PV2-GE Air Intake Ducts for 1:7.645 and 1:4.405 scale LCA Kaveri Air Intake Models. Project Report. National Aerospace LAboratories, Bangalore.

Seshadri, R and Rao, Dwarakanath B and Narayanaswamy, V and Rangaraj, L (1994) Design and fabrication of a laboratory model uniaxial hot press. In: Proceedings of the National Conference on High Pressure Science and Technology, 10-11 Oct 1994, Bangalore, India.

Sheela, K Ramasesha and Shobu, K (1999) Oxidation of MoSi2 and MoSi2-based materials. Bull. Mater. Sci.,, 22 (4). pp. 769-773.

Shubha, V and Dutta, Soma and Ramesh, TG (2008) Pressure effect on Electrical Resistivity of Bi-Sb Alloys. J. High temps high press , 37 . p. 317. ISSN 0018-1544

Shubha, V and Ramesh, TG (1986) Critical point for the pressure-induced valence Transition in Sm4 Bi3. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Shubha, V and Ramesh, TG (1986) A System for the Measurement of Absolute Thermoelectric Power. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Shubha, V and Ramesh, TG and D'sa, Florita and Rao, Jagannatha K (2002) PC based resistograph. Technical Report. National Aerospace Laboratories, Bangalore, India.

Shubha, V and Rarnesh, TG and Bhatnagar, AK (1994) Pressure induced effects near curie point in metallic glass Fe74Niamp;lo4B 16 si2. In: Proceedings of the National Conference on High Pressure Science and Technology, 10-11 Oct 1994, Bangalore, India.

Singh, AK and Balasingh, C (1996) The Effect of Uniaxial Stress Component on the Lattice Strains Measured by a Diffraction Method Using an opposed Anvil Device: Tetragonal System13;. Technical Report. National Aerospace Laboratories, Bangalore, India.

Singh, AK and Balasingh, C (2000) Lattice strains under megabar pressures. Metals Materials and Processes, 12 (2 amp;). pp. 281-292.

Singh, AK and Balasingh, C (2001) X-ray diffraction line broadening under elastic deformation13; of a polycrystalline sample: An elastic-anisotropy effect. Journal of Applied Physics, 90 (5). pp. 2296-2302. ISSN 0021-8979

Singh, AK and Balasingh, C (1996) The effect of Uniaxial component on the lattice strains measured by a diffraction method using opposed anvil device: Trigonal system. Technical Report. National Aerospace Laboratories, Bangalore, India.

Singh, AK and Jayaraman, A (1979) Nonuniform line broadening in high-pressure x-ray diffraction patterns13;. High Temperatures - High Pressures, 11 . pp. 329-333.

Singh, AK and Mohan, M and Divakar, C (1983) Pressure-induced alpha-omega transformation in titanium Features of the kinetics data. Journal of Applied Physics, 54 . pp. 5721-5726. ISSN 0021-8979

Singh, AK and Mohan, M and Divakar, C (1982) The kinetics of pressure-induced alpha-omega transformation in Ti. Journal of Applied Physics, 53 . pp. 1221-1223. ISSN 0021-8979

Singh, AK and Takemura, Kenichi (2001) Measurement and analysis of nonhydrostatic lattice strain component in niobium to 145 GPa under various fluid pressure-transmitting media. Journal of Applied Physics, 90 (7). pp. 3269-3275. ISSN 0021-8979

Singh, AK and Ushadevi, S (1986) The use of energy dispersive method with tungsten carbide opposed anvil high pressure set up. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Sreepathy, S and Poojary, Aithu and Rajagopalan, SR (1987) Studies on estimation of nickel in zinc base die casting by D.C.polarography. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Srikari Tantri, P and Sheela, K Ramasesha (1998) Synthesis and Properties of Molybdenum Disilicide Based Composites. Technical Report. National Aerospace Laboratories, Bangalore, India.

Srinivasan, C and Balasingh, C and Singh, AK (1979) Measurement of thickness of thin films by the x-ray diffraction method. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Srinivasan, V (1973) Serrated flow in quenched duralumin alloy. Philosophical Magazine, 27 (8th Se). pp. 823-832.

Srinivasan, V (1973) Unified theory for the portevin-Le chatelier effect in substitutional alloys. Technical Report. National Aerospace Laboratory, Bangalore, India.

Srivastava, Meenu and William Grips, VK and Rajam, KS (2010) Influence of Cobalt on Manganese incorporation in Ni-Co coatings. J Appl Electrochem, 40 . pp. 777-782. ISSN 1572-8838

Stalin, M and Venkateswarlu, K and Sridhar, MK High temperature flexural testing of ceramic materials. Technical Report. National Aerospace Laboratories, Bangalore. (Unpublished)

Sudagar, Jothi and Venkateswarlu, K and Lian, Jainshe (2010) Dry sliding wear properties of a 7075-T6 aluminum alloy coated with Ni-P (h) in different pretreatment conditions. Journal of Materials Engineering and Performance, 19 (6). pp. 810-818. ISSN 1059-9495

Sudha, Mahadevan and Giridhar, A (2001) Ga as an additive in the As2Te3 glass. Journal of Materials Science, 36 (22). pp. 5325-5332. ISSN 0022x2013;2461

Sugun, BS and Rao, RMVGK Impact Damage Tolerance Assessment in Polymer Composites : A New Approach. In: ICRACM 07, Feb. 07, New Delhi, India.

Sujata, M and Bikas C, Maji and Madangopal, Krishnan and Gouthama, and Ranjit K, Ray (2013) Effect of Co Addition on the Microstructure, Martensitic Transformation and Shape Memory Behavior of Fe-Mn-Si Alloys. The Minerals, Metals & Materials Society and ASM International, 44A (172).

Sundaresan, R and Raghuram, AC (1983) Densification of Ti-6A1-4V powder under hot isostatic pressing. 13;. Transactions of the Indian Institute of Metals, 37 (5). pp. 514-521.

Sunder, R (1983) Binary coded event registration on fatigue fracture surfaces. In: EECO '83 - Digital techniques in fatigue; Proceedings of the, 28-30 Mar 1983, London, England.

Sunder, R (1992) Contribution of individual load cycles to crack growth under aircraft spectrum loading. In: Proceedings of the Symposium, 24 Apr 1990, California, USA.

Sunder, R and Dash, PK (1981) Measurement of fatigue crack closure through electron microscopy. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sunder, R and Seetharam, SA and Bhaskaran, TA (1984) Cycle counting for fatigue crack growth analysis 13; 13;. International Journal of Fatigue, 6 . pp. 147-156. ISSN 0142-1123

Suresh Kumar, M and Ambresha, M and Venkateswarlu, K and Ranganath, VR (2012) Hot deformation behavior of as cast Al-3Mg-0.25Sc alloy. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2007) Coating failure in compressor rotor blades of an aeroengine. Coating failure in compressor rotor blades of an aeroengine, 14 (5). pp. 913-919.

Suresh Kumar, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of stainless steel pipe line. Failure analysis of stainless steel pipe line, 15 (5). pp. 497-504.

U

Ushadevi, S and Singh, AK (1984) The pressure-volume relation of ytterbium up to 9GPa. Bulletin of Materials Science, 6 (2). pp. 395-403.

V

Venkateswarlu, K and Rajinikanth, V and Ajoy Kumar, Ray and Cheng, XU (2010) The characteristics of aluminum–scandium alloys processed by ECAP. Materials Science and Engineering A, 527 . pp. 1448-1452.

Venkateswarlu, K and Rajinikanth, V and Naveen, T and Dhiraj Prasad, Sinha and Atiquzmann, S and Ajoy Kumar, Ray (2009) Abrasive wear behavior of thermally sprayed diamond reinforced composite coating deposited with both oxy-acetylene and HVOF techniques. wear, 266 . pp. 995-1002.

Venkateswarlu, K and Suman , Saurabh and Rajinikanth, V and Ranjan Kumar, Sahu and Ajoy Kumar, Ray (2010) Synthesis of TiN Reinforced Aluminium Metal Matrix Composites Through Microwave Sintering. Material Engineering and Performance, 19 . pp. 231-236. ISSN 1059-9495

Vijayan, Kalyani (1988) X-ray analysis of stacking faults in ytterbium. Journal of Materials Science letters, 7 . pp. 993-994.

Vijayan, Kalyani and Mani, A and Balasingh, C and Singh, AK (1988) X-ray analysis of polycrystalline aluminium subjected to fatigue cycling. Bulletin of Material Science, 10 (3). pp. 205-216.

This list was generated on Wed Sep 3 01:03:22 2014 IST.