Items where Subject is "CHEMISTRY AND MATERIALS > Inorganic, Organic and Physical Chemistry"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators Name | Item Type
Jump to: A | B | C | D | G | I | K | L | M | N | P | R | S | T | U | V
Number of items at this level: 47.

A

Anjana, Jain and Vijayan, Kalyani (2000) Kevlar 49 fibres: Thermal expansion coefficients from high temperature X-ray data13;. Current Science, 78 (3). pp. 331-335.

Aruna, ST and Deshpande, Parag A and Giridhar, Madras (2011) Photocatalytic Activity of Combustion Synthesized Nanocrystalline CeAIO3. Clean - soil, air, Water, 39 (3). pp. 259-264.

Aruna, ST and William Grips, VK and Rajam, KS (2010) Synthesis and characterization of Ni–Al2O3 composite coatings containing different forms of alumina. Journal of Applied Electrochemistry, 40 . pp. 2161-2169. ISSN 1572-8838

B

Barshilia, Harish C and Rajam, KS (2005) A Raman-scattering study on the interface structure of nanolayered TiAlN/TiN and TiN/NbN multilayer thin films grown by reactive dc magnetron sputtering. Journal of Applied Physics, 98 (1). 014311-1.

Barshilia, Harish C and Rajam, KS (2011) Sputter deposited Nanometric multi-scale rough Cd-CdO superhydrophobic thin films. Nanoscience and Nanotechnology letters, 3 (3). pp. 300-305. ISSN 1941-4900

Basu, Bharathibai J and Sreepathy, S and Rajagopalan, SR (1987) Analysis of nickel sulphamate bath using charging current compensated D.C. polarography. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Bhaskaran, TA (1990) Rapid solidification of titanium alloys - A review. Technical Report. National Aeronautical Laboratory, Bangalore, India.

C

Chowdhury, P and Raghuvaran, K and Krishnan, M and Barshilia, Harish C and Rajam, KS (2011) Effect of process parameters on growth rate and diameter of nano-porous alumina templates. Bulletin of Materials Science, 34 (2). pp. 1-5. ISSN 0250-4707

Chowdhury, P and Sellarajan, Boominatha and Krishnan, M and Raghuvaran, K and Barshilia, Harish C and Rajam, KS (2011) In situ electrochemical thinning of barrier oxide layer of porous anodic alumina template. Advanced Science Letters, 5 (1). pp. 253-257. ISSN 1936-6612

D

Divakar, C and Mohan, M and Singh, AK (1980) The D.C. Voltage-dependent resistivity Of CuCI powder compacts under pressure. Solid State Communication, 34 . pp. 385-387.

Divakar, C and Mohan, M and Singh, AK (1982) Thermoelectric power of strontium up to 6.5GPa. Solid State Communications, 41 (11). pp. 833-834.

G

Giridhar, A and Mahadeva, Sudha and Singh, AK (1987) Non-isothermal crystallization of As, Se3 glass. Bulletin of Materials Science, 9 (1). pp. 13-19.

Giridhar, A and Mahadevan, Sudha and Singh, AK (1984) Elastic properties of As-Sb-Se glasses. Bulletin Material Science, 6 . pp. 1001-1007.

Giridhar, A and Mahadevan, Sudha and Singh, AK (1986) Thermal expansion studies on As-Sb-Se glasses. Bulletin of Material Science, 8 (1). pp. 53-60.

Govindarajan, Rama (1990) An overview of transition to turbulence in incompressible two-dimensional boundary layers. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Gupta, Nitant and Sasikala, S and Mahadik, DB and Rao, AV and Barshilia, Harish C (2012) Dual-scale rough multifunctional superhydrophobic ITO coatings prepared by air annealing of sputtered indium tin alloy thin films. Applied Surface Science, 258 . pp. 9723-9731. ISSN 0042-207X

Gutierrez, Gonzalo and Menendez-Proupin, Eduardo and Singh, AK (2006) Elastic Properties of the bcc structure of Bismuth at high pressure. Journal of Applied Physics, 99 (103504).

I

Iyer, RV and Vijayan, Kalyani (1999) Decomposition behaviour of Kevlar 49 fibres:Part I. At TTd. Bull. Mater. Sci.,, 22 (7). pp. 1013-1023.

Iyer, RV and Vijayan, Kalyani (1998) Identification of a new parameter, At(T), controlling the thermally induced effects on Kevlar 49 fibres. Current Science, 75 (9). pp. 946-951.

Iyer, Suman B and Harshavardhan, KS and Kumar, Vikram (1995) Buckling patterns in diamond-like carbon films. Thin Solid Films, 256 (1-2). pp. 94-100.

K

Kasturi, TR and Ramachandra, R and Damodaran, KM and Vijayan, Kalyani (1972) A novel acid catalysed cyclization - synthesis and X-ray crystal structure analysis of 8-Acetoxy-6-(2,4-Dimethoxy-5 -Bromophenyl)-3-Methyltricyclo(5,2,1,03,8)Decan-2-one. Tetrahedron Letters, 50 . pp. 5059-5062.

Kulkarni, AG and Pai, BC and Balasubramanian, N (1979) Preparation of commercial grade boron nitride fibres. Technical Report. National Aeronautical Laboratory, Bangalore, India.

L

Lakshminarayanan, V and Rajagopalan, SR (1984) AC current perturbation techniques for measurement of corrosion rate. 13;. Transactions of the SAEST (Society for Advancement of Electrochemical Science and Technology), 19 (1). pp. 15-21.

M

Mahadevan, Sudha and Giridhar, A and Singh, AK (1986) Calorimetric measurements on AS-SB-SE glasses. Journal of Non-Crystalline Solids, 88 (1). pp. 11-34.

Mahadevan, Sudha and Giridhar, A and Singh, AK (1987) Crystallization studies on As-Sb-Se glasses. Key Engineering Materials, 13-15 . 359 -362.

Mahadevan, Sudha and Giridhar, A and Singh, AK (1983) Elastic properties of Ge-Sb-Se glasses. Journal of Non-Crystalline Solids, 57 . pp. 423-430.

N

Nachiappan, C and Rangaraj, L and Divakar, V (2010) Synthesis and Densification of Monolithic ZrC by reactive Hot pressing. Journal of American Ceramic Society, 93 (5). pp. 1341-1346.

P

Pai, BC and Parameswara, MA and Sridhar, MK and Kanakalatha, P (1983) Mesophase formation in pitches - A metallographic study. Technical Report. National Aeronautical Laboratory, Bangalore, India.

R

Raman, PS (1987) Non-destructive dissolution techniques for the removal of plastic components or contaminants from metallic parts. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Ramasesha, Sheela K and Singh, AK (1990) Pressure dependence of thermoelectric power of high T(sub c) 123 compound. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Rangaraj, L and Divakar, C and Jayaram, V (2004) Reactive hot pressing of titanium nitride-titanium diboride composites at moderate pressures and temperatures. Journal of the American Ceramic Society, 87 (10). pp. 1872-1878. ISSN 0002-7820

Rao, KVL and Lefebvre, AH (1982) Flame blowoff studies using large-scale flameholders. In: American Society of Mechanical Engineers, International Gas Turbine, 18-22 Apr 1982, London, England.

Rao, R Ramachandra and Roopa, HN and Padmaja, RS and Kannan, TS (1993) Processing and characterisation of ceramic slurries . Part-IV : Study of sedimentation behaviour of ceramic slurries. Technical Report. National Aerospace Laboratories, Bangalore, India.

S

Sathish, S and Geetha, M and Aruna, ST and Balaji, N and Rajam, KS and Asokamani, R (2011) Studies on plasma sprayed bu-layered ceramic coating on bio-medical Ti-13Nb-13Zr alloy. Ceramic International, 37 . pp. 1333-1339.

Selvakumar, N and Barshilia, Harish C and Ramesh, M and Rajam, KS (2010) Effect of substrate roughness on the contact angle of sputter deposited superhydrophobic polytetrafluoroethylene coatings. In: 23rd International Conference on Surface Modification Technologies (SMT 23), 2-5 Nov 2009, Mamallapuram.

Shubha, V and Ramesh, TG and Rao, Jagannatha K (1999) PC Based Data Acquisition System for Thermophysical Studies. Technical Report. National Aerospace Laboratories, Bangalore,India.

Singh, AK (1983) The kinetics of pressure-induced polymorphic transformations. Bulletin of Materials Science, 5 (3-4). pp. 219-230.

Singh, AK and Kennedy, GC (1977) Compressions of Si, MgO, and ZrSiO4 to 8 GPa as measured with a WC-anvil X-ray apparatus and epoxy pressure medium. Journal of Applied Physics, 48 (8). pp. 3362-3367.

Sreepathy, S and Kannan, R and Rajagopalan, SR (1993) A composite scheme for the analysis of gold- aluminium-copper alloy. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sreepathy, S and Poojary, Aithu and Basu, Bharathibai J and Rajagopalan, SR (1987) Analysis of free cutting brass by A.C. Polarography. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sreepathy, S and Poojary, Aithu and Rajagopalan, SR (1990) Analysis of trace amounts of lead tin and cadmium in zinc-die-cast by DC polarography. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sur, BN and Janardhan, S (1977) Piecewise mini-max polynomail approximation to a function of a function13;. Technical Report. National Aeronautical Laboratory, Bangalore,India.

T

Tantry, SP and Ramasesha, Sheela K and Lee, JS and Yano, T and Ramamurty, U (2004) Effect of double reinforcements on elevated-temperature strength and toughness of molybdenum disilicide. Journal of the American Ceramic Society, 87 (4). pp. 626-632. ISSN 0002-7820

U

Usha Devi, S (2003) Quantitative Estimation of a-AI 03 in Some Ceramic Specimens by XRD. Technical Report. National Aerospace Laboratories, Bangalore, India.

Usha Devi, S and Singh, AK (1993) Estimation of the Phases of Silicon Carbide and Silicon nitride by the X-ray Diffraction Method. Technical Report. National Aerospace Laboratories, Bangalore, India.

V

Vani, GV and Vijayan, Kalyani (1977) Crystal and molecular structure of n-p-Cyanobenzylidene-p-n- octyloxyaniline (CBOOA). Molecular Crystal and Liquid Crystal, 42 . pp. 249-261.

Vijayan, Kalyani (1987) X-ray evidence for the presence of single crystals of sodium salts in kelvar 49 fibres. Current Science, 56 (20). pp. 1055-1056.

This list was generated on Sat Nov 1 01:04:36 2014 IST.