Items where Subject is "CHEMISTRY AND MATERIALS > Composite Materials"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators Name | Item Type
Number of items at this level: 454.

Book / Book Chapter

Barshilia, Harish C and Deepthi, B and Rajam, KS (2010) Transition metal nitride-based nanolayered multilayer coatings and nanocomposite coatings as novel superhard materials. In: Nanostructured Thin Films and Coatings: Mechanical Properties. CRC Press; Taylor & Francis Group, pp. 427-480. ISBN 978-1-4200-9402-2

Barshilia, Harish C and Rajam, KS (2010) Nanostructured multilayer superlattice coatings and nanocomposite coatings. In: Surface Engineering. Daya Publishing House, p. 266.

Conference or Workshop Item

Anil Kumar, A and Ramesh, Sundaram et. al. and Kundan , K Verma and Kailash , Singh (2008) Determination of ‘Pressure Application Window’ (PAW) for the Vacuum Enhanced Resin Infusion Technology (VERITy) Process. In: Composite Materials and Processrs for the Future (INCCOM7) , 4-5, December 2008, National Aerospace Laboratories.

Anjana, Jain (2005) Thermally induced structural changes in Twaron fibres using13; crystallographic date. In: ISAMPE National Conference on Composites / INCCOM - IV, 9-10 Dec 2005, Coimbatore, India.

Babu Rao, D and Baskey, D and Rawat, RS (2009) Water Jet Cutter: An Efficient Tool for Composite Product Development. In: National Conference on Scientific Achievements of SC & ST Scientits & technologists, 14-16 April 2009, Bangalore.

Balamurugan, R and Moorthy, Emayavaramba MV and Sundaram, Ramesh (2008) Viman Vikas: On-Line quality assurance software for manufacturing of Aircraft Composites Structures. In: Proceedings of the ISAMPE National Conference on Composites INCCOM-7, 4-5 Dec 2008, Bangalore, India.

Balaraju, JN and Kalavati, - and Rajam, KS (2004) Preparation and Characterization of Autocatalytic Ni-P-A12O3 NANO composite coatings. In: International Convention on Surface Engineering, 25-27, Bangalore.

Balaraju, JN and Rajam, KS (2006) Preparation and characterization of electroless nickel composite coatings containing submicron S13N4 particles. In: National Symposium on Electrochemical Science and Technology (NSEST-2006), 21-22 Jul 2006, Bangalore, India.

Barshilia, Harish C (2007) Nanostructured multilayer superlattice coatings and nanocomposite coating. In: Workshop on Nanomaterials and Technology - A perspective, 15 Mar 2007, Bangalore, India.

Barshilia, Harish C and Ghosh, Moumita and Shashidhara, Acharya and Rajarama, Krishna and Rajam, KS (2010) Deposition of TiAlSiN nanocomposite coatings using four-cathode reactive direct current unbalanced magnetron sputtering system. In: International Conference on Surface Modification Technologies XXIII, November 2-5, 2009, GRT Temple Bay, Mamallapuram.

Barshilia, Harish C and Ghosh, Moumita and Shashidhara, Acharya and Suresh, T.N. and Rajam, KS (2010) Characterization of TiAlCrYN nanocomposite coatings prepared using four-cathode reactive unbalanced direct current magnetron sputtering system. In: International Conference on Nanomaterials and Nanotechnology, 13-16 Dec 2010, KS Rangasamy College of Technology, Tiruchengode.

Barshilia, Harish C and Rajam, KS (2003) Nanolayered TiN/NbN multilayers as new superhard materials. In: International conference on advances in surface treatment: research and application, November 4, 2003, Hotel Viceroy, Hyderabad.

Chandra, Satish S and Ramachandra, S and Kamath, GM and Dayanidhi, J and Petley, Vijay and Ramanaiah, B and Salem, Stanley C and Gowda, MNN and Subba Rao, M (2007) Experimental investigations on composites, fibre-metal and metal coupons for high velocity bird impacts. In: Proceedings of the National Seminar on Aerospace Structures, Sep 2007, Coimbatore, Tamil Nadu, India.

Chattopadhyay, Lalitha and Murthy, Sridhara S and Mahesh, H (2008) Analytical and finite element modelling of buckling and post-buckling of delaminated opthotropic plates. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-079), 26-28 Jun 2008, Bangalore, India.

Dayananda, GN and Kamalakannan, GM and Kumar, Senthil P and Jayasankar, S and Satisha, - (2008) A smart material based approach to morphing. In: Proceedings of the Indo-US Workshop on Micro Air Vehicles, 13-14 Nov 2008, Bangalore, India.

Dayananda, GN and Kamalakannan, GM and Senthil Kumar, P and Jayasankar, S and Satisha, - (2009) A smart material based approach to morphing. In: MAV Workshop- Challenges and Presferred Outcomes, 13 November 2008, National Aerospace Laboratories.

Deepthi, B and Devi, Mayura and Barshilia, Harish C and Rajam, KS (2010) Low friction Cr-WS2 nanocomposite coatings prepared using magnetron sputtering. In: International Conference on Surface Modification Technologies XXIII, November 2-5, 2009, GRT Temple Bay, Mamallapuram.

Divakar, C and Bhaumik, SK and Singh, AK (1994) High pressure-High temperature processing and performance of wBN-cBN composite tools. In: Proceedings of the National Conference on High Pressure Science and Technology, 10-11 Oct 1994, Bangalore, India.

Driscoll, Stephen Burke and Rao, RMVGK (1989) Rheological Properties and Impact Behavior Multi-component Thermoplastic Composites. In: 5th Annual ASM/ESD Advanced Composites Conference, 26 Sept 1989, Dearborn.

Durai, Thulasi D and Venkatesh, S and Varughese, Byji and Ramanaiah, B and Dayananda, GN (2008) Concepts for truss based aerofoil construction. In: ISAMPE National Conference on Composites : INCCOM-7, 4-5 Dec 2008, Bangalore, India.

Dwarakanath, K and Dattaguru, B and Dash, PK and Viswnath, S and Murthy, CRL (2001) Stress intensity factors for cracks emanating from a pin-loaded lug. 13; 13;. In: 2nd International Conference on Theoretical, Applied, Computational and Experimental Mechanics, 27-30 Dec 2001, Kharagpur, India.

Gopalan, R and Dattaguru, B (1989) Effects of hygrothermal on the mechanical properties of advanced fibre hybrid composites. In: 7th International Conference on Composite Materials, Nov 1989, Guanghou, China.

Gupta, Nitesh and Sundaram, Ramesh (2007) Optical flow sensors for verity process. In: 2nd ISSS National Conference on MEMS, Microsensors, Smart Materials, Structures and Systems, Nov 2007, Pilani, India.

Jain, Saransh and Viswamurthy , SR and Gupta, Nitesh (2012) Debond Detection and Load Estimation Using Fiber Bragg Grating Sensors on a Composite Test Box – Part II (Algorithm Development). In: International Conference on Smart Materials Structures and Systems, 4-7 January 2012, Indian Institute of Science, Bangalore.

James, P and Kotresh, G and Murali Krishna, D and Ramanaiah, B and Varughese, Byji and Subba Rao, M (2008) Design of spar slice joints in composite wing structures. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-044), 26-28 Jun 2008, Bangalore, India.

Jayasankar, S and Dayananda, GN and Subbarao, M (2007) Hybrid Composites for Morphing Applications. In: 15th National Conference on Aerospace Structures, 15-16 Oct 2007, Coimbatore, Tamil Nadu, India.

Kamalakannan, GM (2007) Ethernet based online process monitoring and controlling of a plant having RS-232 or RS-485 equipment. In: National symposium on Instrumentation – 2007, 2007, Tiruchengode, Tamil Nadu, India.

Kamalakannan, GM and Gupta, Amit Kumar (2009) An improved technique and its implementation for control of high power heaters in large autoclaves and similar plants. In: International Conference of Instrumentation, ICI-2009, 2009, Pune, India.

Kamalakannan, GM and Subba Rao, M (2004) Development of a computer based process control system for an autoclave to cure polymer matrix composites. In: Proceedings of International conference on Instrumentation, 2004, Pune, India.

Kamath, GM and Ramanaiah, B and Verma, KK and Subba Rao, M (2007) Static Environmental Testing of a Cocured Aircraft Wing Test Box. In: 15th National Conference on Aerospace Structures, 15-16 Oct 2007, Coimbatore, Tamil Nadu, India.

Kamath, GM and Ramanaiah, B and Verma, KK and Subba Rao, M (2007) Static environmental testing of a co-cured aircraft wing test box. In: Proceedings of the National Seminar on Aerospace Structures, Sep 2007, Coimbatore, Tamil Nadu, India.

Kamath, GM and Sundaram, Ramesh and Gupta, Nitesh and Subbarao, M (2007) Health monitoring of composites aircraft structures using fibre optic sensors: Some issues and challenges. In: Proceedings of the National Seminar on Aerospace Structures, 15-16 Oct 2007, BITS, Pilani.

Kataria, S and Praveen, Kumar and Jakeer, Khan and Barshilia, Harish C (2011) Tailoring H/E ratio of Ti-TiN nano-composite coatings with improved toughness for tribological applications. In: The International Symposium on Surface Protective Coatings and Indo-German Conference on Surface Engineering, December 7, 2011, Hotel Sheraton, Bangalore . (Unpublished)

Kundan , K Verma and Sandeep, DN and Sugun, BS and Athimoolaganesh, S and Kotresh, Gaddikeri M and Ramesh, Sundaram (2013) Novel Design of Cocured Composite ‘T’ Joints with Integrally Woven 3D Inserts. In: 5th World Conference on 3D Fabrics and Their Applications, 16-17 Dec 2013, Delhi, India,.

Lakshminarayana, HV (1984) Study of interlaminar fracture in unidirectional composite materials. In: Analysis of Structures - A Commemorative volume published on the occasion of the 60th Anniversary of Dr. S.R.Valluri, Dec 1984, NAL, Bangalore, India.

Lakshminarayana, HV and Viswanath, S (1978) Application of the finite element method to the analysis of laminated composite shell structures. In: Symposium on Applications of Computer Methods in Engineering, 23-26 Aug 1977, California, USA.

Manjunatha, CM and Ranganath, VR and Subba Reddy, TC (2007) Damage tolerance evaluation of composite T-joint. In: ICRACM 07, Feb. 2007, New Delhi, India.

Murali Krishna, D and Ramanaiah, B and James, P and Gaddikeri, KM and Varughese, Byji and Subba Rao, M (2007) Experimental investigation on a mechanically fastened splice joint in a composites aircraft wing. In: 15th National Conference on Aerospace Structures, 15-16 Oct 2007, Coimbatore, Tamil Nadu, India.

Murthy, Sridhara S (2010) Design of Aircraft Structures - Structural Design of Carbon Fiber Composite Wing for the SARAS Civil Transport Aircraft. In: International Winter School on Advances in Aeronautical Materials and Technologies, 15-19, Dec 2010, Hyderabad, India.

Padaki, NV and Alagirusamy, R and Sugun, BS (2008) 3D Preforming technologies for composite applications. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-033), 26-28 Jun 2008, Bangalore, India.

Paligan, AA and Shubha, V and Sathiyamoorthy, K and Venu, G and Jayaprakash, C and Manjunath, P (2014) Evaluation of ceramic composite wedge for high speed combustor applications. In: International Conference on Advances in Manufacturing and Materials Engineering (ICAMME 2014), 27-29 Mar 2014, NITE, Suratkal, India.

Panda, PK and Mariappan, L and Kannan, TS (1998) Preparation of Al203 - SiCw in-situ composite powder mixtures by carbothermal reduction of kaolinite. In: National Seminar on "Composite Materials - Manufacturing Processing, Evaluation, Application, and Technologies" (COMPEAT-98), 19-20 Mar 1998, Jamshedpur, India.

Parida, BK and Vijayaraju, K and Mangalgiri, Prakash D (2002) Buckling and fracture behavior of tapered composite panels containing ply drops13;. In: Composite Materilas: Testing, Design, and Acceptance Criteria, 26-27 Mar 2001, Phoenix, AZ, United States.

Polagangu , James and Murali Krishna, D and Gaddikeri, KM and Byji, Varughese (2009) Finite Element Analysis of Inter Spar Ribs of Composite Wing of Light Transport Aircraft against Brazier Load. In: National Conference Scientific Achievements of SC & ST Scientists & Technologists, 14-16 April 2009, Bangalore.

Raja, D and Sreedeep, R and Pashilkar, AA and Kamesh, JV (2005) Active flutter suppression of a composite plate with PZT multilayered benders using LQG control. In: International Conference on Smart Materials Structures and Systems, 28-30 Jul 2005, Bangalore, India.

Raja, S and Balasubramaniam, R and Bhattacharya, Partha and Cjunjanna, G (2001) Damage modelling and prediction using smart structure concepts - A finite element analysis approach. In: ICTACEM 2001: Second International Conference on Theoretical, Applied, Computational and Experimental Mechanics, 27-30 Dec 2001, Kharagpur, India.

Raju, KN and Dash, PK (1979) Plastic energy dissipation rate during stable crack growth in a plate of finite thickness under biaxial loading. In: Proceedings of the International Conference on Fracture Mechanics in Engineering Application, 26-30 Mar 1979, Bangalore, India.

Ramanaiah, B and Ramachandra, HV and Sanjeev Kumar, S and Kotresh, Gaddikeri M and Byji, Varughese and Ramesh, Sundaram and Kamath, GM and Subba Rao, M (2009) Challenges in Static Testing of Co-Cured Co-Bonded Composite Aircraft Structures. In: Natonal Conference on Scientific Achievements of SC & ST Scientisits and Technologists, 14-16 April 2009, Bangalore.

Rangaraj, L and Divakar, C and Jayaram, V (2009) Reactive Processing of Ceramic Composites at Moderate Temperatures. In: National Conference on Scientific Achievements of SC & ST Scientists and Technologists, 14-16 April 2009, Bangalore.

Rangaraj, L and Jayaprakash, S and Ushadevi, S and Venkataswamy, MA and Divakar, C and Singh, AK (2000) Simultaneous synthesis and sintering of TiB2-TiN composite at moderate pressures and Temperatures. In: Proceedings of V National Conference on High Pressure Science and Technology Advances in High Pressure Science and Technology, , Bangalore.

Rao, RMVGK (2006) Nanomodified fibre reinforced polymer composites and adhesives: What needs to be done? In: ASME 2006 Multifunctional Nanocomposites International Conference (MN2006) , Sept 20–22, 2006 , Honolulu, Hawaii, USA.

Rao, Subba M (2007) Composite Materials And Processes For Civil aircraft Structures. In: Symposium on Aircraft Design, Bangalore, India.

Rawat, RS and Karuppannan, D and Dharmappa, BL and Subba Rao, M (2008) Development of a co-cured composite torque shaft for rudder of high speed aircraft. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-043), 26-28 Jun 2008, Bangalore, India.

Sahoo, PK and Manjunatha, CM and Dattaguru, B (2008) Failure prediction of adhesively bonded lap joints between metal and composite adherends. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-096), 26-28 Jun 2008, Bangalore, India.

Sahoo, PK and Manjunatha, CM and Dattaguru, B (2007) Finite element analysis of adhesively bonded lap joints and estimation of shear strength. In: International Conference on Recent Advances in Composite Materials (ICRACM-2007), 20-23 Feb 2007, New Delhi, India.

Saji, D and Varughese, Byji and Pradhan, SC (2008) Finite element analysis for thermal buckling behaviour in functionally graded plates with cut-outs. In: Proceedings of the International conference on Aerospace Science and Technology (INCAST 2008-113), 26-28 Jun 2008, Bangalore, India.

Sakthi Sathya, P S and Jain, Saransh and Viswamurthy , SR and Kotresh, Gaddikeri M and Ramesh, Sundaram (2011) Prediction of Strains in the Debond Region of a Composite Box Structure. In: National Conference on Advances in Composites & Solid Mechanics, 7-8 December 2011, Sardar Vallabhai Patel Institute of Technology, Vasad, Gujarat.

Salem, Stanley C and Gowda, MNN and Ramachandra, HV and Kamath, GM and Subbarao, M (2007) Development of cglare: Design, fabrication and characterisation. In: Proceedings of the National Seminar INCCOM-6 on future trends in Composite Materials and Processing, Dec 2007, Kanpur, India.

Sandeep, DN and Sugun, BS (2012) 3D WEAVING POSSIBILITIES ON AN 8 SHAFT LOOM. In: ECCM15 - 15TH EUROPEAN CONFERENCE ON COMPOSITE MATERIALS, 24-28 June 2012, Venice, Italy.

Sanjeev Kumar, S and Ramanaiah, B and Sudheendra, HN and Kamath, GM and Subba Rao, M (2006) Application of Acoustic Emission to Study Debond Growth in Co-cured/Co-bonded Composite Structures under Fatigue Loading. In: Proceedings of the 14th National Seminar on Aerospace Structures: Fatigue, Fracture and Ageing Structures, 30-31 Jan 2006, Nagpur, India.

Sanjeev Kumar, S and Senthil Kumar, P and Ramanaiah, B and Sudheendra, HN (2008) Acoustic Emission Studies of Bearing Failure in Composites. In: Proceedings o the ISAMPE National Conference on Composite:INCCOM-7, 4-5, December 2008, Bangalore, India.

Satish, Chandra and Ramachandra, S and Kamath, GM and Karthikeyan, K and Dhayanidhi , J and Vijay, Petley and Ramanaiah, B and Salem, Stanley C and Gowda, MNN and Subbarao, M (2007) Experimental investigations on composite, fibre-metal and metal coupons for high velocity bird impacts. In: 15th National Conference on Aerospace Structures, 15-16 Oct 2007, Coimbatore, Tamil Nadu, India.

Shireesha , G and Manjunatha, C and Jain, Anjana and Radhakrishna, MC (2013) Preparation and characterization of Poly(vinylidenefluoride)-CdSiO3 nanocomposite thin films. In: Workshop on Advanced materials manufacturing management and thermal studies, 3 May 2013, Tumkur.

Singh, KL and Manjunatha, CM and Venkata, NM (2006) Modeling and stress analysis of stiffened carbon fiber composite panels. In: Proceedings of National Seminar on Composites INCCOM-5, ISAMPE, 24-25 Nov 2006, Hyderabad, India.

Sridhar, MK and Basavarajappa, G and Balasubramanian, N (1979) Control of crack propagation in metals by the use of composites. In: Proceedings of the International Conference on Fracture Mechanics in Engineering Application, 26-30 Mar 1979, Bangalore, India.

Sridhar, MK and Subramaniam, Iyer and Ajay, Chandra and Singh, AK (1985) Acoustic emission monitoring of Iosipescu shear test on glass fibre-epoxy composites. In: 2nd International Conference on Acoustic Emission, Bangalore, India.

Srinivasa, V and Sanjeev Kumar, S and Ramesh Kumar, M and Sudheendra, HN and Madhava, MR (2009) Non-Destructive Evaluation—A Pivotal Technology for Qualification of Composite Aircraft Structures. In: National Conference on Scientific Achievements of SC & ST Scientific & Technologists, 14-16 April 2009, Bangalore.

Srivastava, Meenu and William Grips, VK and Rajam, KS (2007) Effect of CO on S13N4 incorporation and properties of electrodeposited NI. In: International and INCCOM-6 Conference on Future trends on Composite Materials and Processing, 12-14 Dec 2007, IIT, Kanpur, India.

Srivastava, Meenu and William Grips, VK and Rajam, KS (2006) Electrochemical deposition of NI/SIC and NI-CO/SIC nano-composites. In: National Symposium on Electrochemical Science and Technology (NSEST-2006), 21-22 Jul 2006, Bangalore, India.

Stanley , C Salem and Kotresh, Gaddikeri M and Gowda, MNN and Ramesh, Sundaram and Dhayanidhi , J and Nagarajappa, B and Sathiya Naarayan, S and Satish, Chandra and Anuradha , Nayak and Vijay , Petley and Ramachandra, S Design and Testing of Wing Leading Edge of a Light Transport Aircraft. In: NASAS 2011, Sep 22-24,2011, IIT Kanpur.

Stanley , C Salem and Kotresh, Gaddikeri M and Gowda, MNN and Ramesh, Sundaram and Dhayanidhi , J and Nagarajappa, B and Sathiya Naarayan, S and Satish, Chandra and Anuradha , Nayak and Vijay , Petley and Ramachandra, S Design and Testing of Wing Leading Edge of a Light Transport Aircraft. In: NASAS 2011, Sep 22-24,2011, IIT Kanpur.

Subba Rao, M and Chandra, Ramesh (1984) Experimental investigation of behaviour of a typical riveted finite joint. In: Analysis of Structures - A Commemorative volume published on the occasion of the 60th Anniversary of Dr. S.R.Valluri, Dec 1984, NAL, Bangalore, India.

Subramaniam, C and Padma, A and Rao, RMVGK Studies on Aromatic Amine-Epoxy Novolac Systems. In: International Conference organised by RAPRA Technology Limited, March 22-23, 1990, Shropshire, England.

Sugun, BS (2012) Of Weaves, Knits and Their Composites. In: Recent trends in textile technology and material science, 21-06-2012, Technical university of Liberec.

Sugun, BS and Rao, RMVGK Impact Damage Tolerance Assessment in Polymer Composites : A New Approach. In: ICRACM 07, Feb. 07, New Delhi, India.

Sundaram, Ramesh (2008) Resin infusion technology for development of primary aircraft structures. In: Proceedings of the National Conference on Advanced Materials for Aerospace and Defence Applications (ADMAT-2008), 7-8 Jan 2008, Coimbatore, Tamil Nadu, India.

Sundaram, Ramesh and Kamath, GM and Gupta, Nitesh and Subbarao, M (2007) Structural health monitoring of co-cured aerospace composite structures using fibre optic sensors. In: 2nd ISSS National Conference on MEMS, Microsensors, Smart Materials, Structures and Systems, Nov 2007, Pilani, India.

Sundaresan, MJ and Ramachandra, HV and Sridhara, S and Naik, V and Sudheendra, HN (1983) Evaluation of damage growth in hybrid composites by AE energy measurement. In: International Symposium on Acoustic Emission from Reinforced Plastics,, 19-21 July 1983, San francisco, United States.

Thulasi Durai, D and Viswamurthy , SR and Vinoth, M and Balasubramaniam, - and Mohan, Kumar M and Dayananda, GN (2011) Development of a damage tolerant truss based composite empennage box. In: Proceedings of XII NASAS, 23-24, Sept 2011, IIT, Kanpur, India.

Varughese, Byji and Kishore, A and Radhakrishna, K and Subba Rao, M (2005) Buckling and Postbuckling studies on stiffened composite13; panels with circular cutouts. In: Isampe National Conference on Composites / INCCOM IV, 9-10 Dec 2005, Coimbatore, India.

kumar, Ramesh M and Madhava, MR (2008) Acoustic emission signature analysis of failure modes in composites. In: ISAMPE National Conference on Composites : INCCOM-7, 4-5 Dec 2008, Bangalore, India.

Journal Article

Amirthan, G and UdayaKumar, A and Balasubramanian, N (2011) Thermal conductivity studies on Si/SiC ceramic composites. Ceramics International, 37 . pp. 423-426. ISSN 0272-8842

Amirthan, G and UdayaKumar, A and Prasad, VVB and Balasubramanian, M (2010) Solid particle erosion studies on biomorphic Si/SiC ceramic composites. Wear, 268 . pp. 145-152. ISSN 0043-1648

Anjana, Jain and Vijayan, Kalyani (2002) Thermally induced structural changes in Nomex fibres. Bulletin of Material Science, 25 (4). pp. 341-346.

Arun Kumar , KN and Lohith, N and Ganesh, BB (2012) Effect of ribs and stringer spacings on the weight of aircraft structure for aluminum material. Journal of Applied Sciences, 12 (10). pp. 1006-1012. ISSN 1812-5654

Aruna, ST and Anandan, C and William Grips, VK Effect of probe sonication and sodium hexametaphosphate on the microhardness and wear behavior of electrodeposited Ni–SiC composite coating. Applied Surface Science, 301 . pp. 383-390. ISSN 0042-207X

Aruna, ST and Rajam, KS (2004) Mixture of fuels approach for the solution combustion synthesis13; of Al2O3x2013;ZrO2 nanocomposite. Materials Research Bulletin, 39 (2). pp. 157-167.

Aruna, ST and Roy, Shibayan and Sharma, A and Savitha, G and William Grips, VK (2014) Cost-effective wear and oxidation resistant electrodeposited Ni–pumice coating. Surface and Coatings Technology, 251 . pp. 201-209. ISSN 0257-8972

Aruna, ST and William Grips, VK (2012) Electrodeposited nickel composite coating containing in-situ nickel impregnated alumina particles. Materials Letters, 1 (66). pp. 141-143. ISSN 0167-577X

Aruna, ST and William Grips, VK and Rajam, KS (2009) Ni-based electrodeposited composite coating exhibiting improved microhardness, corrosion and wear resistance properties. Journal of Alloys and Compounds, 468 . pp. 546-552. ISSN 0925-8388

Ashok Kumar, A and Alagar, M and Rao, RMVGK (2002) Synthesis and characterization of siliconized epoxy- 1, 3-bis(maleimido) benzene intercrosslinked matrix materials. Polymer, 43 . pp. 693-702.

Balamurugan, R and Biswanath, Mondal and Sukamal, Ghosh (2009) Optimisation of machining parameters for hard machining: grey relational theory approach and ANOVA. International Journal of Advanced Manufacturing Technology, 45 (11-12). pp. 1068-1086. ISSN 1068-1086

Balaraju, JN and Sankara Narayanan, TSN and Seshadri, SK (2006) Structure and phase transformation behaviour of electroless Nix2013;P composite coatings. Materials Research Bulletin, 41 . pp. 847-860.

Balaraju, JN and Anandan, C and Rajam, KS (2005) Morphological study of ternary Ni-Cu-P alloys by atomic force microscopy13;. Applied Surface Science, 250 (1-4). pp. 88-97. ISSN 0042-207X

Balaraju, JN and Jahan, SM and Rajam, KS (2006) Studies on autocatalytic deposition of ternary Ni-W-P alloys using nickel sulphamate bath. Surface and Coatings Technology, 201 (3-4). pp. 507-512. ISSN 0257-8972

Balaraju, JN and Narayanan, Sankara TSN and Seshadri, SK (2001) Evaluation of the corrosion resistance of electroless Ni-P and Ni-P composite coating by electrochemical impedance spectroscopy. Journal of Solid State Electrochemistry, 5 . pp. 334-338.

Balaraju, JN and Rajam, KS STUDIES ON ELECTROLESS Ni-W-P TERNARY ALLOY. Transactions of the Metal Finishers Association of India, 12 (1-2). pp. 80-88.

Balasingh, C and Kanakalatha, P and Sridhar, MK and Singh, AK (1989) Residual stresses in aluminum alloy sheet/aramid fiber laminated composites. Indian Journal of Physics, 63A . pp. 262-266.

Barshilia, Harish C and Deepthi, B and Prabhu, ASA and Rajam, KS (2006) Superhard nanocomposite coatings of TiN/Si3N4 prepared by reactive direct current unbalanced magnetron sputtering. Surface amp; Coatings Technology, 201 (1-2). pp. 329-337.

Barshilia, Harish C and Deepthi, B and Rajam, KS (2007) Deposition and characterization of CrN/Si3N4 and CrAlN/Si3N4 nanocomposite coatings prepared using reactive DC unbalanced magnetron sputtering. Surface and Coatings Technology, 201 (24). pp. 9468-9475. ISSN 0257-8972

Barshilia, Harish C and Deepthi, B and Rajam, KS (2006) Deposition and characterization of TiAlN/Si3N4 superhard nanocomposite coatings prepared by reactive direct current unbalanced magnetron sputtering. Vaccum, 81 (4). pp. 479-488.

Barshilia, Harish C and Deepthi, B and Rajam, KS and Kanwal Preet, Bhatti and Chaudhary, Sujeet (2009) Growth and characterization of TiAlN/CrAlN superlattices prepared by reactive direct current magnetron sputtering. Journal of Vacuum Science andTechnology A, 27 (1). pp. 29-36. ISSN 0022-5355

Barshilia, Harish C and Deepthi, B and Srinivas, G and Rajam, KS (2012) Sputter deposited low-friction and tough Cr-Si3N4 nanocomposite coatings on plasma nitrided M2 steel. Vacuum, 86 (8). pp. 1118-1125. ISSN 0042-207X

Barshilia, Harish C and Moumita, Ghosh and Shashidhara, Acharya and Raja, Ramakrishna and Rajam, KS (2010) Deposition and characterization of TiAlSiN nanocomposite coatings prepared by reactive pulsed direct current unbalanced magnetron sputtering. Applied Surface Science, 256 (21). pp. 6420-6426. ISSN 0042-207X

Barshilia, Harish C and Rajam, KS (2004) Deposition of TiN/a-C superhard nanocomposite coatings. Journal of Electrochemical Society of India, 53 . p. 95.

Barshilia, Harish C and Rajam, KS (2006) Reactive sputtering of hard nitride coatings using asymmetric-bipolar pulsed DC generator. Surface and Coatings Technology, 201 (3-4). pp. 1827-1835. ISSN 0257-8972

Barshilia, Harish C and Rajam, KS and Anjana, Jain and Gopinadhan, K and Chaudhary, Sujeet (2006) A comparative study on the structure and properties of nanolayered TiN/NbN and TiAlN/TiN multilayer coatings prepared by reactive direct current magnetron sputtering. Thin Solid Films, 503 . pp. 158-166.

Barshilia, Harish C and Selvakumar, N and Deepthi, B and Rajam, KS (2006) A comparative study of reactive direct current magnetron sputtered CrAlN and CrN coatings. Surface and Coatings Technology, 201 (6). pp. 2193-2201. ISSN 0257-8972

Barshilia, Harish C and Selvakumar, N and Rajam, KS and Gopinadhan, K and Chaudhary, Sujeet (2008) Investigation of interface properties of sputter deposited TiN/CrN superlattices by low-angle X-ray reflectivity. Journal Of Physics D: Applied Physics, 41 (205409).

Barshilia, Harish C and Shashidhara, Acharya and Moumita, Ghosh and Suresh, T.N. and Rajam, KS and Konchady, Manohar and Pai, Devdas and Sankar, Jagannathan (2010) Performance evaluation of TiAlCrYN nanocomposite coatings deposited using four-cathode reactive unbalanced pulsed direct current magnetron sputtering system. Vacuum, 85 . pp. 411-420. ISSN 0042-207X

Barshilia, Harish C and William Grips, VK and Rajam, KS (2004) Corrosion behavior of nanolayered TiAlN/CrN multilayer coatings prepared by reactive DC magnetron sputtering process. Journal of Electrochemical Society of India, 53 . p. 85.

Basu, Bharathibai J and Rajagopalan, SR (1993) Polarographic Determination of Trace Amount of Titanium Using Catalytic Current in the Presence of Chlorate. Bulletin of Electrochemistry, 9 (1). pp. 35-37.

Bhagyashekar, MS and Rao, RMVGK (2007) Effects of material and test parameters on the wear behavior of particulate filled composites Part 1: SiC-epoxy and 13; Gr-epoxy composites. Journal of Reinforced Plastics and Composites, 26 . pp. 1753-1768.

Bharathibai, Basu J and Dinesh Kumar, V and Anandan, C (2012) Surface studies on superhydrophobic and oleophobic polydimethylsiloxane-silica nanocomposite. Applied Surface Science, 261 . pp. 807-814. ISSN 0042-207X

Bhaskaran, TA and Krishnan, RV and Srinivasa Raghavan, K (1985) Decomposition of hexagonal martensite in a titanium-copper alloy. Scripta Metallurgica, 19 (3). pp. 319-322. ISSN 0036-9748

Bhattacharya, Anup K and Bhaskaran, T A and Ramasesha, Sheela K (2002) Aluminum infiltration into Molybdenum Silicide preforms. Communications of the American Ceramic Society, 85 (9). pp. 2364-2366. ISSN 0002-7820

Bhattacharya, Partha and Suhail, Hassan and Sinha, Prasanta K. (2002) Finite element analysis and distributed control13; of laminated composite shells using LQR/IMSC approach. Aerospace Science and Technology, 6 . pp. 273-281.

Bhaumik, SK and Divakar, C and Rangaraj, L and Singh, AK (1998) Reaction sintering of NiA1 composites under pressure. Materials Science and Engineering: A, 257 (2). pp. 341-348.

Bhaumik, SK and Divakar, C and Rangaraj, L and Singh, AK (1998) Reaction sintering of NiAl and TiB2x2013;NiAl composites under pressure. Materials Science and Engineering A, 257 (2). pp. 341-348.

Bhaumik, SK and Divakar, C and Singh, AK (1995) Machining Ti -6AI-4V alloy with a wBN-cBN composite tool. Materials amp; Design, 16 (4). pp. 221-226.

Bhaumik, SK and Divakar, C and Singh, AK and Upadhyaya, GS (2000) Synthesis and sintering of TiB2 and TiB2x2013;TiC composite under high pressure. Materials Science and Engineering A, 279 (1-2). pp. 275-281.

Bijoysri, Khan and Rao, RMVGK and Venkataraman, N (1995) Low Velocity Impact Fatigue Studies on Glass Epoxy Composite Laminates with Varied Material and Test Parameters - Effect of Incident Energy and Fibre Volume Fraction. Journal of Reinforced Plastics and Composites, 14 . pp. 1150-1159. ISSN 0731-6844

Biswas, SK and Vijayan, Kalyani (1988) Changes to near-surface region of PTFE during dry sliding against steel. Journal of Material Science, 23 . pp. 1877-1885. ISSN 0022-2461

Chakradhar, RPS and Dinesh Kumar, V and Rao, JL and Basu, Bharathibai J (2011) Fabrication of superhydrophobic surfaces based on ZnO–PDMS nanocomposite coatings and study of its wetting behaviour. Applied Surface Science, 257 (20). pp. 8569-8575. ISSN 0042-207X

Chakradhar, RPS and Dinesh Kumar, V and Shivakumara, IS and Rao, JL and Bharathibai, Basu J (2012) Characterisation of microstructure and evaluation of optical and EPR properties of superhydrophobic copper dodecanoate films. Surface and Interface Analysis , 44 (4). pp. 412-417.

Chandra, Sarath D and Rao, RMVGK and Kishore, - (1991) Effect of Sic particles on compressive strength and glass /phenolic composites fracture features of glass phenolic composites13;. Scripta Metallurgica et Materialia, Vol.25 . pp. 1641-1646. ISSN 1359-6462

Chattopadhyay, Lalitha (2012) Analytical determination of buckling load of a delaminated plate subjected to axial compression. International Journal of Applied Mathematics and Mechanics, 8 (18). pp. 38-51. ISSN 0973-0184

Chattopadhyay, Lalitha and Jain, PK (2012) Buckling load and post-buckling solution for mode shape of delaminated beam. International Journal of Engineering and Applied Sciences, 4 (2). pp. 59-66.

Chattopadhyay, Lalitha and Sivaranjani, T (2012) Cohesive zone model for debond failure in plated beam using transverse shear deformation theory. International Journal of Applied Mathematics and Mechanics, 8 (8). pp. 22-33. ISSN 0973-0184

Chattopadhyay, Lalitha and Sridhara Murthy, S (2011) Analytical and finite element modeling simulation of buckling and postbuckling of delaminated orthotropic plates. International Journal of Modeling, Simulation and Scientific Computing, 2 (1). pp. 97-104.

Chetan S, Jarali and Raja, S and Kiefer, Bjoern (2011) Modeling the effective properties and themomechanical behavior or SMA-SMP multifunctional composite lamintes. Polymer Composites, 32 (6). pp. 910-927.

Dayananda, GN and Shankar, V (2003) The design of a Ni-Ti based shape memory alloy actuator. Journal of Aerspace Sciences & Technologies, 55 (4). pp. 268-274.

Deepthi, B and Srinivas, G and Praveen, Kumar and Sridhara Rao, DV and Barshilia, Harish C (2012) Sputter deposited nanostructured Au-WS2 solid lubricant coatings. Nanoscience and Nanotechnology letters, 4 (1). pp. 53-60. ISSN 1941-4900

Duffy, Thomas S and Shen, Guoyin and Shu, Jinfu and Mao, Ho-Kwang and Hemley, Russell J and Singh, AK (1999) Elasticity, shear strength, and equation of state of molybdenum and gold from x-ray diffraction under nonhydrostatic compression to 24 GPa. Journal of Applied Physics, 86 (12). pp. 6729-6736.

George, S and Goravar, S and Mishra, D and Shyamsunder, MT and Sharma, P and Padmasree, GK and Sanjeev Kumar, S and Bremond, P and Mukherjee, K (2010) Stress monitoring and analysis using lock-in thermography. Insight - Non-Destructive Testing and Condition Monitoring, 52 (9). 470-474(5). ISSN 1354-2575

Giridhar, J and Kishore, . and Rao, RMVGK (1986) Moisture Absorption Characteristics of Natural Fibre Composites. Journal of Reinforced Plastics and Composites, 5 . pp. 141-150. ISSN 0731-6844

Gopalan, R and Rao, RMVGK and Murthy, MVV and Dattaguru, B (1986) Diffusion studies on advanced fibre hybrid composites. Journal of Reinforced Plastics and Composites, 5 (1). pp. 51-61. ISSN 0731-6844

Gopi, B and Nagakrishna, N and Sivaprasad, K and Venkateswarlu, K (2012) Effect of rolling temperature on microstructure and mechanical Properties of cryorolled Al-Mg-Si Alloy Reinforced with 3wt% TiB2 in-situ Composite. Advanced Materials Research, 584 . pp. 556-560.

Iyer, RV and Sooryanarayana, K and Row, Guru TN and Vijayan, Kalyani (2003) Low temperature crystallographic data on Kevlar 49 fibres. Journal of Material Science, 38 . pp. 133-139. ISSN 0022-2461

Iyer, RV and Vijayan, Kalyani (2000) Effect of thermal spikes on the structural characteristics of Kevlar fibres. Journal of Materials Science, 35 (22). pp. 5731-5739. ISSN 0022-2461

Jarali, Chetan S and Raja, S (2008) Homogenization and pseudoelastic behavior of composite materials reinforced with shape memory alloy fibers. Journal of Composite Materials, 42 (17). pp. 1685-1707. ISSN 0021-9983

Jarali, Chetan S and Raja, S and Upadhya, AR (2008) Micro-mechanical behaviors of SMA composite materials under hygro-thermo-elastic strain fields. International Journal of Solids and Structures, 45 . p. 4347. ISSN 0020-7683

Jayasankar, S and Senthil Kumar, P and Varghese, B and Ramanaiah, B (2011) Smart Aerodynamic Surface for a Typical Military Aircraft Using Shape Memory Elements. Journal of Aircraft, 48 (6). pp. 1968-1978. ISSN 0021-8669

Kamalakannan, GM and Gupta, Amit Kumar (2010) An improved technique and its implementation for control of high power heaters in large autoclaves and similar plants. Journal of Instrument Society of India, 40 (2).

Kamath, GM and Sundaram, Ramesh and Gupta, Nitesh and Rao, Subba M (2010) Damage studies in composite structures for structural health monitoring using strain sensors. Structural Health Monitoring, 9 (6). pp. 497-512. ISSN 14759217

Kanakalatha, P and Sridhar, MK and Ajay, Chandra and Balasingh, C and Singh, AK (1990) Preparation and characterization of aluminium alloy sheet aramid fibre-laminated composites. Bulletin of Material Science, 10 . pp. 305-311.

Karuppannan, D and Rawat, RS and Ramachandra, HV and Saji, D and Byji, Varughese (2013) Composite for reinforcement of damaged metallic aircraft wings. Journal of Aerospace Sciences and Technology, 65 (1). pp. 8-13. ISSN 0972-950X

Kavitha, and Revathi, A and Sandhya, Rao and Shylaja, Srihari and Dayananda, GN (2012) Characterization of shape memory behavior of CTBN-epoxy resin system. Journal of Polymer Research, 19 . pp. 1-7.

Kishore, R. Mohan and Shridhar, MK and Rao, RMVGK (1983) xFEFF;Compressive strength of jute-glass hybrid fibre composites 13;. Journal of Material Science Letters, 2 . pp. 99-102. ISSN 0261-8028

Kulkarni, AG and Pai, BC and Balasubramanian, N (1979) The cementation technique for coating carbon fibres. Journal of Materials Science, 14 . pp. 592-598. ISSN 0022-2461

Kumar, GV and Rao, KM and Kumar, JS and Raja, S (2011) Selective modal space control approach for smart composite cylindrical shell structure. ARPN Journal of Engineering and Applied Sciences, 6 (3). pp. 67-74. ISSN 1819-6608

Lakshmi, RV and Bharathidasan, T and Bera, Parthasarathi and Bharathibai, Basu J (2012) Fabrication of Superhydrophobic and Oleophobic sol–gel Nanocomposite coating. Surface and Coatings Technology, 206 (19-20). pp. 3888-3894. ISSN 0257-8972

Lakshminarayana, HV (1986) Finite element analysis of rotating laminated laminated composite annular discs. Composites, 17 (1). pp. 42-48.

Lakshminarayana, HV (1984) A symmetric rail shear test for mode II fracture toughness (G/IIc) of composite materials - Finite element analysis. Journal of Composite Materials, 18 . pp. 227-238. ISSN 0021-9983

Lakshminarayana, HV and Dwarakanath, K (1992) Free vibration charecteristics of cylindrical shells made of composite materials. Journal of Sound and vibration, 154 (3). pp. 431-439.

Lakshminarayana, HV and Viswanath, S (1978) A high precision triangular laminated anisotropic cylindrical shell finite element. Computers and Structures, 8 . pp. 633-640. ISSN 0045-7949

Madhava, MR and Murali, TP and Rohatgi, PK (1986) Ultrasonic velocities in cast aluminun alloy-shell char particle composites. Journal of Materials Science Letters, 5 (9). pp. 895-897.

Mahale, Santhosh and Rajamani, Deepika and Revathi, A and Prakash, M.Rajendra and Srihari, Shylaja and Rao, RMVGK (2004) Hot-wet property characterisation of a high-temperature cured glass-epoxy composite in immersion environment. Journal of Reinforced Plastics and Composites, 23 (17). pp. 1883-1892. ISSN 0731-6844

Mani, A and Pai, BC and Vijayan, Kalyani (1986) Comparison of the graphitizabilities of heat-treated coal tar and its mesophase pitches. Journal of material science, 12 . pp. 506-508.

Mani, A and Vijayan, Kalyani (1976) A furnace for high temperature powder diffractometry. Current science, 45 (10). pp. 371-372.

Manjunatha, C and Nagabhushana, BM and Nagabhushana, H and Chakradhar, RPS (2012) Transformation of hydrothermally derived nanowire cluster intermediates into CdSiO3 nanobelts. Journal of Materials Chemistry, 22 . pp. 22392-22397.

Manjunatha, CM and Jagannathan, N and Padmalatha, K and Kinloch, AJ and Taylor, AC (2011) Improved variable-amplitude fatigue behavior of a glass-fiber-reinforced hybrid-toughened epoxy composite. Journal of Reinforced Plastics and Composites, 30 (21). pp. 1783-1793. ISSN 0731-6844

Manjunattha, CM (2009) The Tensile Fatigue Behavior of a GFRP Composite with Rubber Particle Modified Epoxy Matrix. Journal of reinforced Plastics and Composites . pp. 2170-2182.

Manohar , HR and Chandrashekharaiah, TM and Venkateswarlu, K and Kori, SA (2012) Dry sliding wear response of A413 alloy:Influence of intermetallics and test parameters. Tribology International, 51 . pp. 54-60. ISSN 0301-679X

Mnajunatha, CM and Jagannathan, N and Padmalatha, K and Kinloch, AJ and Taylor, AC (2011) The Effect of Micron-Rubber and Nano-Silica Particles on the Fatigue Crack Growth Behavior of an Epoxy Polymer. International Journal of Nanoscience, 10 (4&5). pp. 1095-1099. ISSN 0219-581X

Murthy, Aruna V and Dattaguru, B and Narayana, HVL and Rao, AK (1991) Stress and strength analysis of pin joints in laminated anisotropic plates. Composite Structures, 19 (4). pp. 299-312. ISSN 0263-8223

Murthy, MVV and Bapu Rao, MN (1988) Three-Dimensional stress problem of a finite thick plate with a through crack under tension.13;. International Journal of Solids and Structures, 24 (7). pp. 693-703.

Natarajan, Kandasamy and Rao, RMVGK (1994) Toughening studies on an ABS/PC blend-modified epoxy resin system. High Performance Polymer, 6 . pp. 241-248. ISSN 0954-0083

Naveen, VP and Vani, A and Prakasha, V and Divakar, CJ and Ananthkrishnan, T and Rao, RMVGK (2000) Studies on mechanical behavior of knitted glass-epoxy composites. Journal of Reinforced Plastics and Composites, 19 (5). pp. 396-402. ISSN 0731-6844

Nirmal, C and Maithi, SN and Padmavathi, T and Vanaja, A and Rao, RMVGK (2006) Studies on hydroxyl terminated polybutadiene toughened phenolic resin13;. High Performance Polymers, 18 (1). pp. 57-69.

Nitesh, Gupta and Augustin, MJ and Sakthi Sathya, P S and Saransh, Jain and Viswamurthy , SR and Kotesh M, Gaddikeri M and Ramesh, Sundaram (2013) Structural Health Monitoring of Composite Aircraft Structures Using Fiber Bragg Grating Sensors. Journal of the Indian Institute of Science, 93 (4). pp. 735-750. ISSN 0970-4140

Nitesh, Gupta and Ramesh, Sundaram (2009) Fiber optic sensors for monitoring flow in vacuum enhanced resin infusion technology (VERITy) process. Composites Part A: applied Science and Manufacturing, 40 (8). pp. 1065-1070. ISSN 1359-835X

Novak, V and Sittner, P and Dayananda, GN and Braz-Fernandes, FM and Mahesh, KK (2008) Electric resistance variation of NiTi shape memory alloy wires in thermomechanical tests: Experiments and simulation. Materials Science and Engineering A . pp. 127-133.

Padaki, NV and Alagirusamy, R and Deopura, BL and Sugun, BS and Fangueiro, Raul (2008) Low velocity impact behaviour of textile reinforced composites. Indian Journal of Fibre Br Textile Research .

Padaki, NV and Alagirusamy, R and Sugun, BS (2006) Knitted Preforms for Composite Application. Journal of Industrial Textiles .

Padma, A and Rao, RMVGK and Nagendrappa, G (1997) Effect of Prereaction on Curing of Elastomer-Modified Epoxy Resins. Journal of Applied Polymer Science, 65 . pp. 1751-1757. ISSN 0360-6834

Padmavathi, T and Naidu, SV and Rao, RMVGK (2012) Studies on mechanical behavior of surface modified sisal fibre - Epoxy composites. Journal of Reinforced Plastics and Composites, 31 (8). pp. 519-532. ISSN 0731-6844

Padmavathi, T and Venkatanaidu, S and Rao, RMVGK (2012) Characterisation studies on Mercerised Sisal Fibers for Composite Applications. Journal of Polymer Materials, 29 (2). pp. 261-272.

Pai, BC and Kulkarni, AG and Bhasker, TA and Balasubramanian, N (1980) Coating structure of metal-coated carbon fibres. Journal of Materials Science, 15 (7). pp. 1860-1863. ISSN 0022-2461

Pai, BC and Kulkarni, AG and Parameshwara, MA and Balasubramanian, N (1983) Interface stability in vacuum infiltrated stainless steel and nichrome reinforced aluminium composites. Journal of Materials Science Letters, 2 (10). pp. 553-557.

Pai, BC and Kulkarni, AG and Parameswara, MA and Balasubramanian, N (1983) Interface stability in vacuum infiltrated stainless steel and nichrome reinforced aluminum composites. Journal of Materials Science Letters, 2 (10). pp. 553-557. ISSN 0261-8028 (Paper) 1573-4811 (Online)

Pai, BC and Ray, S and Prabhakar, KV and Rohatgi, PK (1976) Fabrication of aluminum-alumina/magnesia/particulate composites in foundries using magnesium additions to the melts. Materials Science and Engineering, 24 . pp. 31-44.

Pai, BC and Rohatgi, PK (1975) Copper coating on graphite particles (for dispersion in cast aluminum alloys). Materials Science and Engineering, 21 . pp. 161-167.

Pai, Raghavendra and Kamath, MS and Rao, RMVGK Acid Resistance of glass fibre composites with Different layup sequences Part-II Degradation studies. Journal of Reinforced Plastics and Composites, 16 (11). pp. 1013-1019. ISSN 0731-6844

Panda, PK and Ramakrishna, S (2007) Electrospinning of alumina nanofibers using different precursors. Journal of Materials Science, 42 . pp. 2189-2193.

Parida, BK and Nicholas, T (1994) Elevated temperature fatigue crack growth behavior of Ti-1100. Fatiue Fracture Engineering Materials Structures, 17 (5). pp. 551-561.

Pavan, RMV and Saravanan, M and Dinesh, AR and Rao, YJ and Srihari, Shylaja and Revathi, A (2001) Hygrothermal Effects on Painted and Unpainted Glass/Epoxy Composites—Part B: Degradation Studies. Journal of Reinforced Plastics and Composites, 20 (12). pp. 1048-1053. ISSN 0731-6844

Pavan, RMV and Saravanan, V and Dinesh, AR and Rao, YJ and Srihari, Shylaja and Revathi, A (2001) Hygrothermal Effects on Painted and Unpainted Glass/Epoxy Composites—Part A:Moisture Absorption Characteristics. Journal of Reinforced Plastics and Composites, 20 (12). pp. 1036-1046. ISSN 0731-6844

Pradeep, D and Reddy, N Janardhana and Kumar, C Rahul and Srikanth, L and Rao, RMVGK (2007) Studies on mechanical behavior of glass epoxy composites with induced defects and correlations with NDT characterization parameters. Journal of Reinforced Plastics and Composites, 26 (15). pp. 1539-1556.

Raghu Prasad, BK and Pavan Kumar, DVTG (2008) Analysis of composite ENF specimen using higher order beam theories. Thin-Walled Structures, 46 (6). 676 -688.

Rahul Kumar, C and Radhakrishna, K and Rao, RMVGK (2005) Postcuring effects on impact behavior of glass/epoxy composite laminates. Journal of Reinforced Plastics and Composites, 24 (9). pp. 949-960. ISSN 0731-6844

Raja, S and Dwarakanathan, D and Sinha, PK and Prathap, Gangan (2004) Bending behavior of piezo-hygrothermo-elastic smart laminated composite flat and curved plates with active control13;. Journal of Reinforced Plastics and Composites, 23 (3). pp. 265-290. ISSN 0731-6844

Raja, S and Sinha, PK and Prathap, Gangan and Bhattacharya, Partha (2002) Influence of one and two dimensional piezoelectric actuation on active vibration control of smart panels. Aerospace Science and Technology, 6 (3). pp. 209-216. ISSN 1270-9638

Raju, M and Reddy, CR and Narasimha Swamy, MR and Giridhar, G and Srikanth, L and Rajendra Prakash, M and Rao, RMVGK (2006) Repair Effectiveness Studies on Impact Damaged Sandwich Composite Constructions. Journal of Reinforced Plastics and Composites, 25 (1). ISSN 0731-6844

Ramasesha, Sheela K and Singh, AK (1991) Measurement under pressure of thermoelectric power along the thickness of a thin specimen. Review of Scientific Instruments, 62 (5). pp. 1372-1373.

Ramasesha, Sheela K and Singh, AK and Murugaraj, P (1991) Anisotropic thermoelectric power in YBa,Cu,O7-x, single crystals under pressures up to 8 GPa. Physical Review B, 43 (10). pp. 8620-8622.

Ramaseshan, S and Vijayan, Kalyani (1976) Use of radical scavengers in X-ray data collection form protein crystals. Current Science, 45 (2). p. 49.

Ramesh, R and Kishore, - and Rao, RMVGK (1983) Dry wear studies on glass-fibre reinforced epoxy composites. Wear, 89 . pp. 131-136.

Ramesh, Sundaram and Kamath, GM and Gupta, Nitesh (2012) Structural health monitoring of composite structures - Issues and Challenges. International Journal of Vehicle Structures & Systems, 4 (3). pp. 74-85. ISSN 0975-3540

Rangaraj, L and Divakar, C and Jayaram, V (2010) Reactive hot pressing of ZrB2–ZrCx ultra-high temperature ceramic composites with the addition of SiC particulate. Journal of the European Ceramic Society, 30 . pp. 3263-3266. ISSN 0955-2219

Rangaraj, L and Divakar, C and Jayaram, V (2004) Reactive hot pressing of titanium nitride-titanium diboride composites at moderate pressures and temperatures. Journal of the American Ceramic Society, 87 (10). pp. 1872-1878. ISSN 0002-7820

Rangaraj, L and Divakar, C and Vikram, Jayaram (2010) Fabrication and mechanisms of densification of ZrB2-based ultra high temperature ceramics by reactive hot pressing. Journal of the European Ceramic Society, 30 (1). pp. 129-138. ISSN 0955-2219

Rangaraj, L and Suresha, SJ and Divakar, C and Jayaram, V (2008) Low-temperature processing of ZrB2-ZrC composites by reactive hot pressing. Metallurgical and Materials Transactions A, 39A (7). pp. 1496-1505. ISSN 1073-5623

Rao, R Ramachandra and Kannan, KS (2002) Synthesis and sintering of hydroxyapatitex2013;zirconia composites. Materials Science and Engineering C, 20 (1-2). pp. 187-193.

Rao, RMVGK and Balasubramanian, N (1984) Hygrothermal effects on the fracture of coated and uncoated polymer-composites. Advances in Fracture Research, 4 . pp. 2989-2996.

Rao, RMVGK and Balasubramanian, N (1981) Moisture absorption phenomenon in permeable fiber polymer composites. Journal of Applied Polymer Science, 26 . pp. 4069-4079. ISSN 0360-6834

Rao, RMVGK and Balasubramanian, N and Manas, Chanda (1984) Factors affecting moisture absorption in polymer composites. I - Influence of internal factors. II - Influence of external factors. Journal of Reinforced Plastics and Composites, 3 . pp. 232-253.

Rao, RMVGK and Chanda, M and Balasubramanian, N (1983) A Fickian diffusion model for permeable fibre polymer composites. Journal of Reinforced Plastics and Composites, 2 . pp. 289-299. ISSN 0731-6844

Rao, RMVGK and Chanda, Manas and Balasubramanian, N (1984) Factors Mfecting Moisture Absorption in Polymer Composites13; Part ll: Influence of External Factors. Journal of Reinforced Plastics and Composites, 3 . pp. 246-253. ISSN 0731-6844

Rao, RMVGK and Kaushal, SC and Tankala, K (1991) Some hygrothermal effects on the mechanical behaviour and fractography of glass-epoxy composites with modified interface. Journal of Materials, 26 . pp. 6293-6299.

Rao, RMVGK and Nahar, GA and Alagirusamy, R (2000) Mechanical properties of glass composites based on knitted preforms with inlays. Indian Journal of Fibre and Textile Research, 25 . pp. 115-120. ISSN 0971-0426

Rao, RMVGK and Padma, A and Patel, HS (1992) Kinetic Studies on Epoxy Resins Cured with a Novel Polyamine. High Performance Polymer, 4 (1). pp. 41-48. ISSN 0954-0083

Rao, RMVGK and Padma, A and Subramaniam, C (1994) The structural modification of epoxy resins by a liquid elastomer. High Performance Polymer, 6 (1). pp. 71-81. ISSN 0954-0083

Rao, RMVGK and Pourassamy, A (1976) Studies on the curing of a loaded unsaturated polyester binder. Polymer, 17 . pp. 611-612.

Rao, Sandhya and Rao, RMVGK (2008) Cure studies on bifunctional epoxy matrices using a domestic microwave oven. Polymer Testing, 27 (5). pp. 645-652.

Rathod, VT and Mahapatra, D Roy and Jain, Anjana and Gayathri, A (2010) Characterization of large-area PVDF thin film for electro-mechanical and ultrasonic sensing applications. Sensors and Actuators A: Physical , 163 . pp. 164-171. ISSN 0924-4247

Revathi, A and Prakash, M.Rajendra and Singh, AK and Mahale, Santhosh and Srihari, Shylaja and Rao, RMVGK (2004) Hot-Wet Property Characterisation of a High-Temperature Cured Glass–Epoxy Composite in Immersion Environment. Journal of Reinforced Plastics and Composites, 23 (17). pp. 1884-1892. ISSN 0731-6844

Revathi, A and Sandhya, Rao and Kavitha, Rao V and Prakash, M. Rajendra and Murugan, M. Sendil and Shylaja, Srihari and Dayananda, GN (2014) Influence of temperature on tensile behavior of multiwalled carbon nanotube modified epoxy nanocomposites. Journal of Materials Research, 29 (15). ISSN 0884-2914

Revathi, A and Srihari, Shylaja and Rao, RMVGK (2004) Moisture Distribution Profiles in RT-Cured Glass/ Epoxy Laminates of Different Thicknesses. Journal of Reinforced Plastics and Composites, 23 (10). pp. 1075-1094. ISSN 0731-6844

Sahoo, B and Panda, PK (2007) Dielectric, ferroelectric and piezoelectric properties of13; (1 x2013; x)[Pb0.91La0.09(Zr0.60Ti0.40)O3]x2013;x[Pb(Mg1/3Nb2/3)O3],13; 0 xA3; x xA3; 1. Journal of Materials Science, 42: . pp. 4270-4275.

Sahoo, B and Panda, PK (2007) Effect of CeO2 on dielectric, ferroelectric and piezoelectric13; properties of PMNx2013;PT (67/33) compositions. Journal of Materials Science, 42 . pp. 4745-4752.

Sahoo, B and Panda, PK (2007) Ferroelectric, dielectric and piezoelectric properties13; of Pb1x2013;xCex(Zr0.60Ti0.40)O3, 0 xA3; x xA3; 0.08. Journal of Materials Science, 42 . pp. 9684-9688.

Sainathan, N and Padmanabhan, K and Sashidhara, S and Rao, RMVGK and Kishore, - (1995) Influence of Particulate Graphite Additions on the Shear Related Behaviour of Glass Fabric Reinforced Epoxy Composites. Journal of Reinforced Plastics and Composites, 14 . pp. 445-457. ISSN 0731-6844

Segun, BS and Rao, RMVGK (2000) Drop Weight Impact Studies on Rib-Knit RTM Laminates. Journal of Reinforced Plastics and Composites, 19 (06). pp. 492-508. ISSN 0731-6844

Selvakumar, N and Mohamed, MJS and Narayanasamy, R and Venkateswarlu, K (2013) Forming limit diagram and void coalescence analysis of AA5052 coated with molybdenum-based ceramic nanocomposites. Materials and Design, 52 . pp. 393-403. ISSN 0261-3069

Shankar, PN and Kumar, M (1995) Vortex rings generated by drops just coalescing with a pool. Physics of Fluids, 7 (4). pp. 737-746. ISSN 1070-6631

Shetty, MR and Vijay Kumar, KR and Sudhir, S and Raghu, P and Madhuranath, D and Rao, RMVGK (1999) Effect of Fibre Orientation on Mode-I13; Interlaminar Fracture Toughness of Glass13; Epoxy Composites. Journal of Reinforced Plastics and Composites, 16 . pp. 1-15. ISSN 0731-6844

Shukla, Arvind and Rao, RMVGK (1984) Curing Studies on Modified Epoxy and Unsaturated Polyester Resins. Journal of Applied Polymer Science, 29 . pp. 1553-1558. ISSN 0360-6834

Singh, AK and Kennedy, GC (1975) Compressibility of selenium glass to 5 GPa. Journal of Applied Physics, 46 (9). pp. 3861-3865.

Sinha, RP and Jarali, Chetan S and Raja, S (2011) Modelling the thermomechanical behaviour of shape memory polymer materials. Indian Journal of Engineering and Materials Sciences, 18 . pp. 15-23. ISSN 0971-4588

Sridhar, MK and Basavarappa, G and Kasturi, SG and Balasubramanian, N (1984) Mechanical properties of jute polyester composites.13;. Indian Journal of Technology, 22 (6). pp. 213-215.

Srihari, Shylaja and Rao, RMVGK (1999) Hygrothermal Characterization and Diffusion Studies on Carbon/Epoxy composites. Journal of Reinforced Plastics and Composites, 18 (10). pp. 921-930. ISSN 0731-6844

Srihari, Shylaja and Rao, RMVGK (1999) Hygrothermal Charactrisation and DiffusionStudies on Glass Epoxy Composites. Journal of Reinforced Plastics and Composites, 18 (10). pp. 942-953. ISSN 0731-6844

Srihari, Shylaja and Rao, RMVGK (1999) Hygrothermal characterization and diffusion studies on carbon /epoxy composites. Journal of Reinforced Plastics and Composites, 18 (10). pp. 921-930. ISSN 0731-6844

Srihari, Shylaja and Revathi, A and Rao, RMVGK (2002) Hygrothermal Effects on RT-Cured Glass-Epoxy Composites in Immersion Environments. Part A: Moisture Absorption Characteristics. Journal of Reinforced Plastics and Composites, 21 (11). pp. 983-993. ISSN 0731-6844

Srikanth, L and Rao, RMVGK (2011) Concurrent studies on Braided and Filament wound carbon fibre composites - a comparative appraisal. Concurrent studies on braided and filament wound carbon fibre composites - a comparative appraisal, 30 (16). pp. 1359-1365.

Srivastava, Meenu and Balaraju, JN and Rajam, KS (2010) Improvement in the properties of nickel by nano-Cr2O3 incorporation. Surface and Coatings Technology, 205 . pp. 66-75. ISSN 0257-8972

Srivastava, Meenu and Balaraju, JN and Ravisankar, B and Anandan, C and William Grips, VK (2012) High temperature oxidation and corrosion behaviour of Ni/Ni-Co-Al composite coatings. Applied Surface Science, 263 . pp. 597-607. ISSN 0042-207X

Srivastava, Meenu and William Grips, VK and Jain, Anjana and Rajam, KS (2007) Influence of SiC particle size on the structure and tribological properties of Ni-Co composites. Surface and Coatings Technology, 202 . pp. 310-318. ISSN 0257-8972

Srivastava, Meenu and William Grips, VK and Rajam, KS (2007) Electrochemical Deposition and Tribological Behaviour of Ni and Ni-Co Metal Matrix composites with SiC nano-particles. Applied Surface Science, 253 . pp. 3814-3824. ISSN 0042-207X

Srivastava, Meenu and William Grips, VK and Rajam, KS (2010) Electrodeposition of Ni–Co composites containing nano-CeO2 and their structure, properties. Applied Surface Science, 257 (3). pp. 717-722. ISSN 0042-207X

Srivastava, Meenu and William Grips, VK and Rajam, KS (2009) Influence of Co on Si3N4 incorporation in electrodeposited Ni. Journal of Alloys and Compounds, 469 . pp. 362-365. ISSN 0925-8388

Srivastava, Meenu and William Grips, VK and Rajam, KS (2008) Influence of SiC, Si3N4 and Al2O3 particles on the structure and properties of electrodeposited Ni. Materials Letters, 62 . pp. 3487-3489. ISSN 0167-577X

Srivastava, Meenu and William Grips, VK and Rajam, KS (2008) Structure and properties of electrodeposited Ni-Co-YZA composite coatings. J Appl Electrochem, 38 (5). pp. 669-677. ISSN 1572-8838

Subba Rao, M and Gowda, MNN (2002) Development of fin for LCA using advanced composites. Journal of the Aeronautical Society of India, 54 (2). pp. 106-108. ISSN 0001-9267

Subramanian, A and Chandra, R and Murthy, MVV and Rao, AK (1983) Photoelastic determination of stress intensity factors in patched cracked plates. Engineering Fracture Mechanics, 18 (2). pp. 305-313. ISSN 0013-7944

Sugun, BS and Rao, RMVGK (2004) Impactor Mass Effects in Glass-Epoxy Composites Subjected to Repeated Drop Tests. Journal of Reinforced Plastics and Composites, 23 (14). pp. 1547-1560.

Sugun, BS and Rao, RMVGK (2009) Impactor Mass effects in polymer Matrix Composites under Low Velocity Conditions: A Repeated Drops Test Approach. lnternational Journal of Mechanical Engineering and Materials Sciences, 2(1) June 2009 .

Sugun, BS and Rao, RMVGK (2004) Low-velocity Impact Characterization of Glass, Carbon and Kevlar Composites Using Repeated Drop Tests. Journal of Reinforced Plastics and Composites, 23 (15). pp. 1583-1599. ISSN 0731-6844

Suresh Kumar, M and Raghavendra, K and Venkataswamy, MA and Ramachandra, HV (2012) Fractographic Analysis of Tensile Failures of Aerospace Grade Composites. Materials Research, 15 (6). pp. 990-997.

Suresh Kumar, R and Sivakumar, D and Venkateswarlu, K and Gandhi, AS Mechanical behavior of molybdenum disilicide reinforced silicon carbide composites. Scripta Materialia , 65 (9). pp. 838-841. ISSN 1359-6462

Tanty, Srikari P and Ramasesha, Sheela K and Jae-Seol, Lee and Toyohiko , Yano (2004) Effect of Double Reinforcements on Elevated-Temperature Strength and Toughness of Molybdenum Disilicide. Journal of American Ceramic Society, 87 (4). pp. 626-632.

UdayaKumar, A and Balasubramanian, M and Gopala, HB and Sampathkumaran, P and Seetharamu, S and Babu, Ramesh and Sathiyamoorthy, D and Reddy, GR (2011) Influence of the type of interface on the tribological characteristics of ICVI generated SiCf/SiC composites. Wear, 271 . pp. 859-865. ISSN 0043-1648

UdayaKumar, A and Raole, PM and Balasubramanian, M (2011) Synthesis of tailored 2D SiCf/SiC ceramic matrix composites with BN/C interphase through ICVI. Journal of Nuclear Materials, 417 (1). pp. 363-366. ISSN 0022-3115

UdayaKumar, A and Stalin, M and Venkateswarlu, K (2013) Effect of CVD SiC seal coating on the mechanical properties of Cf /SiC composites generated through CVI. Surface and Coatings Technology . pp. 1-26. ISSN 0257-8972

Ushadevi, S and Singh, AK (1984) The pressure-volume relation of ytterbium up to 9GPa. Bulletin of Materials Science, 6 (2). pp. 395-403.

Valluri, SR and Rajagopalan, SR (1983) Materials research at National Aeronautical Laboratory13; (Contributions of S Ramaseshan). Bulletin of Material Science, 5 (3 amp;). pp. 373-380.

Vanaja, A and Padmavathi, T and Rao, RMVGK and Jyotsna, T.S (2008) Phenolic novolac IPNs for High Performance Composite Applications. International Journal of Mechanical Engineering and Materials Sciences, 1 (2). pp. 123-127.

Vanaja, A and Rao, RMVGK (2002) Fibre Fraction Effects on Thermal Degradation Behaviour of GFRP, CFRP and Hybrid Composites. Journal of Reinforced Plastics and Composites, 21 (15). pp. 1389-1398. ISSN 0731-6844

Vanarotti, M and Shrishail, P and Sridhar, BR and Venkateswarlu, K and Kori, SA (2014) Surface Modification of SiC Reinforcements & Its Effects on Mechanical Properties of Aluminium Based MMC. Applied Mechanics and Materials, 446-44 . pp. 93-97. ISSN ISSN: 1662-7482

Vanarotti, M and Venkateswarlu, K and Kori, SA and Sridhar, BR and Padasalgi, SB (2013) Effect of Ni coating on SiC particles to synthesize Al based Metal Matrix Composites. International Journal of Science Research, 01 (4). pp. 405-409. ISSN 2319-7064

Vani, GV (1977) The Crystal and Molecular Structure of the Nematogenic Compound N-p-Methoxybenzylidene-p-phenylazoaniline (MBPAA). Acta Cryst. . pp. 2236-2240.

Veadavathi, BM and Mani, A and Vijayan, Kalyani (1982) Crystal data on L-epinephrine bydrochloride monohydrate. Current Science, 51 (9). p. 466.

Veadavathi, BM and Vijayan, Kalyani (1979) The crystal and structure of the radioprotectant cystamine dhydrochloride. Current science, 48 (23). pp. 1028-1030.

Vedavathi, BM and Vijayan, Kalyani (1979) 2-Amino-1,3-thiazoline hydrochloride. Acta Crystallography (B37). pp. 477-480. ISSN 0567.7408

Vedavathi, BM and Vijayan, Kalyani (1976) Radioprotectant Sodium Fluoroacetate. Acta Crystallography . pp. 946-948.

Vijayan, Kalyani and Mani, A and Balasingh, C and Singh, AK (1986) An oscillatory variation of the half-width of x-ray diffraction-line profiles with fatigue cycling. Scripta Metallurgica, 20 . pp. 1767-1770.

Vinayak, RU and Iyengar, NGR (1995) Transient thermal conduction in rectangular fiber reinforced composite laminates. Advanced Composite Materials: The Official Journal of the Japan Society of Composite Materials, 4 (4). pp. 327-342. ISSN 0924-3046

William Grips, VK and Barshilia, Harish C and Ezhil selvi, V and Kalavati, -- and Rajam, KS (2006) Electrochemical behavior of single layer CrN, TiN, TiAlN coatings and nanolayered TiAlN/CrN multilayer coatings prepared by reactive direct current magnetron sputtering. Thin Solid Films, 514 (1-2). pp. 204-211.

Patent

Council of Scientific and Industrial Research - National Aerospace Laboratories (2012) Process for preparing nickel based nanocomposite coating containing particles of Yttria Stabilized Cubic Zirconia-Alumina (NI-YZA) useful for tribological applications and NI-YZA nanocomposite coating prepared thereby. IN 254523.

Rao, RMVGK et al. (2008) A process for shaping thermoplastic sheets for wing shields / Windows for vehicles using an unique using an unique vacuum technique. 216783.

Proj.Doc/Technical Report

Balasubramaniyam, Thiruveni and Choudhury, Balamati and Jha, RM (2012) Metamaterial Invisibility Cloaks: A Review. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Anandan, K and Brahma, KK and Raju, KN (1989) Fatigue crack propagation in AI-Li alloys. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Anjana, Jain and Vijayan, Kalyani (1995) Development of software to scan the N onbonded intermolecular interactions. Technical Report. National Aerospace Laboratories, Bangalore, India.

Aruna, HM and Guruprasad, K and Murthy, MVV and Chandra, Ramesh (1986) Finite element analysis of composite rudder for MiG-21 aircraft. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Avinash , NV and Jha, RM (2009) Electromagnetic Characterization of Metamaterials using Free Space Measurement System. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Balasingh, C and Gururaja, B and Rohini, S (1993) Residual stress distribution in the As-received aluminum-lithium alloy sheet. Technical Report. National Aerospace Laboratories, Bangalore, India.

Balasingh, C and Kanakalatha, P and Sridhar, MK and Singh, AK (1988) Residual stresses in aluminium alloy sheet/aramid fiber laminated composites. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Balasubramaniam, TS and Rao, RMVGK (1991) Generation of preliminary design data on basic composite materials used in the NAL light aircraft (NALLA) phase I. Technical Report. National Aerospace Laboratories, Bangalore, India.

Bapu Rao, MN and Murthy, MVV and Subramanya Sastry, SS and Rajakumar, A and Anoop, Jharia and Dwarakanath, K (1991) A Report on the Preliminary design of Composite Cocured LCA Fin. Project Report. National Aerospace Laboratories, Bangalore.

Basha, Amjad M and Jain, Anjana and Premnath, K Jagadesh and Vijayan, Kalyani (2002) POLYSEARCH -A Database on Polymers Used in Aerospace. Technical Report. National Aerospace Laboratories, Bangalore, India.

Basu, Bharathibai J and Rajagopalan, SR (1988) Polarographic estimation of antimony, arsenic, tin and Bismuth in lead-antimony alloys. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Basu, Bharathibai J and Rajagopalan, SR (1988) Studies on the spectrophotometric determination of molybdenum in steels by the thiocyanate method. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Bisoyi, Sanjana and Choudhury, Balamati and Jha, RM (2012) Soft Computing Techniques for Metamaterial: A Cross-indexed Bibliography (2003-2012). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Bisoyi, Sanjana and Choudhury, Balamati and Jha, RM (2012) A Cross-indexed Bibliography for Invisibility Cloak (2003-2012). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Chandra, Ramesh (1987) Current status report of Do-228 aircraft's composite rudder13; development. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Chandra, Ramesh and Viswanathan, KS and Jayasurya, M (1986) Mechanical properties of carbon epoxy composites. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Dayananda, GN and Senthil Kumar, P and Ramachandra , HV and Jayasankar, S and Satisha, - (2009) Inve~tigation~oThf ermo-Mechanical Characteristics of Thin Shape Memory Alloy (Ni-Ti) Wires. Project Report. National Aerospace Laboratories, Bangalore.

Dayananda, GN and Senthil Kumar, P and Shankar, V (2003) Progress Report of the Project "Development of Mousche using SMA" for the Period January 2003 to November 2003. Project Report. National Aerospace Laboratories, Bangalore.

Dayananda, GN and Shankar, V and Gautam, RK and Senthil Kumar, P (2002) Preliminary Design Report for Automation of Hansa Flap Using SMA. Project Report. National Aerospace Laboratories, Bangalore.

Deepthi, B (2005) Development of superhard nanocomposite coatings by unbalanced magnetron sputtering process. Technical Report. National Aerospace Laboratories, Bangalore.

Divakar, C and Bhaumik, SK and Singh, AK (1993) A Preliminary report on the field trials and market survey of composite tools based on boron nitride. Technical Report. National Aerospace Laboratories, Bangalore, India.

Divakar, C and Mohan, Murali and Jaman, PM and Singh, AK (1978) Pressure and temperature calibration of the cubic press. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Dutt, HNV and Rajeswari, B (1986) Constant source panel method for analysis of potential flow over Arbitrary bodies. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Dutta, Soma and Jeyaseelan, Antony and Sabina, JEJ and Guddadam, M and Shubha, V (2010) Acousto ultrasonic method for structural health monitoring using insitu Piezoelectric Coating. Project Report. National Aerospace Laboratories, Bangalore, India.

Dutta, Soma and Shubha, V (2010) Non destructive acousto ultrasonic Method for structural health monitoring --- A review. Project Report. National Aerospace Laboratories, Bangalore, India.

Farook, MA and Ramanaiah, B and Gopalan, R (1990) Static testing of DO-228 Composite rudder - a preliminary report. Project Report. National Aerospace Laboratories, Bangalore.

Giridhar, A and Mahadevan, Sudha (1999) Electrical conductivity of Cu,(As0.4Se0.3Te0.3)100-x Glasses. Technical Report. National Aerospace Laboratories, Bangalore,India.

Giridhar, A and Mahadevan, Sudha (1999) Mean Atomic Volume and Tg of CUx(AS0.4Se0.2Te0.4)100-x Glasses. Technical Report. National Aerospace Laboratories, Bangalore,India.

Giridhar, A and Narasimham, PSL and Mahadevan, Sudha and Singh, AK (1984) Dilatometric measurements on solids. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Gopalakrishnan, PS and Lakshmi Narasimham, PS (1998) Synthesis of Silicon Nitride and Related Materials. Technical Report. National Aerospace Laboratories, Bangalore, India.

Gopalakrishnan, PS and Narasimhan, PSL (1987) Studies on high-Tc superconducting materials. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Gopalan, R and Farook, MA and Ramanaiah, B (1990) Static testing of DO-228 composite rudder. Project Report. National Aerospace Laboratories, Bangalore.

Gopalan, R and Murthy, MVV (1985) Diffusion studies on advanced fibre hybrid composites. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Gopalan, R and Ramanaiah, B and Sonewane, Jayant (1989) Static testing of composite rudder of a military aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Govindan, Kutty M and Saravana, Kumar N and Lohith, N and Sudheendra, HN and Subbarao, M (2009) Master process sheets for fabrication of CFC centre fuselage parts for TEJAS (Light Combat Aircraft). Technical Report. NAL.

Govindan, Kutty M and Saravana, Kumar N and Ramesh, Sundaram and Sudheendra, HN and Subbarao, M (2009) Master process sheets for fabrication of CFC centre fuselage parts for TEJAS (Light Combat Aircraft) - part-4. Technical Report. NAL.

Guruprasad, K and Subba Rao, M and Chandra, Ramesh (1986) Finite element analysis of composite rudder for DO 228 aircraft. Technical Report. National Aerospace Laboratory, Bangalore, India.

Himabindu, NG and Vinoy, KJ and Jha, RM (1995) Profile of Radome Materials. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Iyer, RV and Vijayan, Kalyani (1995) Axial Compression of Kevlar Fibres by Ultrasonic Agitation. Technical Report. National Aerospace Laboratories, Bangalore, India.

Iyer, RV and Vijayan, Kalyani (1997) Effect of Thermal Pulses on Kevlar Fibres. Technical Report. National Aerospace Laboratories, Bangalore, India.

Iyer, RV and Vijayan, Kalyani (1998) Identification of a New Parameter o t (T;, Controlling13; the Thermally Induced Effects on Keviar 49 Fibres. Technical Report. National Aerospace Laboratories, Bangalore, India.

Iyer, RV and Vijayan, Kalyani (1997) Study of the ecomposition Behavior of KEVLAR Fibres-Part 1. At Temperatures 5001C. Technical Report. National Aerospace Laboratories, Bangalore, India.

Iyer, RV and Vijayan, Kalyani (1993) X-ray analysis of the thermal decomposition behaviour of Kevlar fibres. Technical Report. National Aerospace Laboratories, Bangalore, India.

Jain, Anjana and Vijayan, Kalyani (1997) Effect of Some Liquid Penetrants on NOME.-. Technical Report. National Aerospace Laboratories, Bangalore, India.

Jain, Nikhil (2005) EM Design and Applications of Metamaterials. Technical Report. National Aerospace Laboratories, Bangalore.

Jain, Nikhil and Jha, RM (2005) Applications of Metamaterials. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Jain, Nikhil and Jha, RM (2005) Emergence and Structure of Metamaterials. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Jayasankar, S and Dayananda, GN and Sandeep, CD and Subba Rao, M (2006) Preliminary Hesign and Fabrication - :a1 of SMA Embedded GFRP Beam . Project Report. National Aerospace Laboratories, Bangalore.

Jayasankar, S and Dayananda, GN and Senthil Kumar, P and Subba Rao, M (2007) tvaluation of Properties of SMA and SMA Embedded 3t.c-1,{*. FRP Beams. Project Report. National Aerospace Laboratories, Bangalore.

Jayasankar, S and Senthil Kumar, P and Kamaleshiah, MS and Satisha, - and Prashanth, NS and Sateesh, VL and Alfred Paul, Singh and Gangadhar, S and Dayananda, GN (2010) Development of SMA Based Smart Trimming Surface for Typical Civil Aircraft Applications. Project Report. National Aerospace Laboratories, Bangalore.

Jayasurya, M and Viswanathan, KS and Subba Rao, M (1990) Fabrication of composite wing box for lightning studies. Project Report. National Aerospace Laboratories, Bangalore.

Jayatheertha, C and Viswanath, S (1992) Static buckling and free vibration analysis of composite/ sandwich plates using improved transverse shear stiffness. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Kalyanam, M and Rajagopalan, SR (1988) Emission spectrochemical analysis of ferrous materials using Liquid-in-layer spark technique. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Kamalakannan, GM and Subba Rao, M (2006) Design and development of cure controller for bonded repair of aircraft structures13; 13;. Technical Report. National Aerospace Laboratories, Bangalore, India.

Kannan, R and Rajagopalan, SR (1988) An enhancement method for the polarographic13; determination of trace amounts of arsenic. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Kannan, R and Rajagopalan, SR (1988) An indirect amplification method for the determination of trace13; amounts of germanium. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Kannan, Sayee and Dubey, Satya Kesh and Jha , RM (2012) Retrieval of EM Parameters from Multi-layer Composite Material. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Kataria, S and Barshilia, Harish C and Praveen, Kumar and Srinivas, G and Siju, John and Jakeer, Khan (2011) Hard yet tough Ti-TiN nanocomposite coatings. Technical Report. National Aerospace Laboratories, National Aerospace Laboratories.

Kulkarni, AG and Pai, BC and Balasubramanian, N (1983) Tubular reinforcing elements for energy absorbing composites. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Kumar, K. Mohan and Srikanth, L and Surendra, C and Kumar, C. Rahul and Rao, RMVGK Development of Tooling and CFRP Components for SATCOM Application (ISRO-SAC). Project Report. National Aerospace Laboratories, Bangalore.

Kumar, M Praveen and Vinoy, KJ and Jha, RM (1994) Indexed Data Base of Radome (1960-1993). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Kumar, Mohan and Rao, RMVGK (2003) Fabrication Technology for the development of Nose Cone Radome for the Jaguar Maritime Aircraft. Project Report. NAL, Bangalore.

Kumar, Mohan and Rao, RMVGK (2003) Fabrication Technology for the development of Nose Radome for the Saras Aircraft. Project Report. NAL, Bangalore.

Lakshminarayana, HV and Dwarakanath, K (1991) Finite element analysis of a GFRP pressure vessel for NPOL Cochin. Project Report. National Aerospace Laboratories, Bangalore.

Leelavathi, H and Veeraraghavalu, VM and Subrahmanyam, K and Pichamuthu, JP (1981) GaAs laser voice communicator. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Madhava, MR (1990) Design & Development of Bridge Deck Plate Using Composite Materials and sandwich Construction : Concluding Report. Project Report. National Aerospace Laboratories, Bangalore.

Madhava, MR and Upadhya, AR and Jayasurya, M (1985) Tests on Redux Bonded Sandwich Specimens. Project Report. National Aerospace Laboratories, Bangalore.

Mani, A and Vijayan, Kalyani (1986) Fabrication of a flat film camera for X-ray diffraction by fibres. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Manisha, Banker M and Kotresh, Gaddikeri M and Byji, Varughese (2009) Global finite element analysis of SARAS composite wing for fuel pressure. Technical Report. NAL.

Manisha, Banker M and Kotresh, Gaddikeri M and Byji , Varughese and Subharao, M (2009) Finite Element Analysis of SARAS Wing Test Box Addressing Manufacturing Deviations. Technical Report. NAL, Bangalore.

Mitchenko, EI and Prakash, Raghu V and Sunder, R (1992) Fatigue Crack Growth Under Programmed Equivalent of FALSTAFF Spectrum. Technical Report. National Aerospace Laboratories, Bangalore, India.

Mohan Kumar, K and Surendra, C and Rahul Kumar, C and Rao, RMVGK (2006) ACS Dome-Installation. Project Report. National Aerospace Laboratories, Bangalore.

Moorthy, Emayavaramba MV and Saji, D and Ravi, Kumar P (2009) Quality assurance (QA) document for composite components of Tejas-Light Combat Aircraft (LCA). Technical Report. NAL.

Murthy, MVV (1985) Design and Development of a Composite Rudder a (A Project Proposal to ARM). Project Report. National Aerospace Laboratories, Bangalore.

Naganarayana, BP and Prathap, Gangan (1988) Implementation of 2-node Shear-flexible field-consistent13; composite beam element in SAP IV. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Nair, RU and Ramesh, R and Jha, RM (2005) Preliminary EM Characterisation of Honeycomb Sandwich Saras Radome. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Nair, RU and Sajjan, Sangeetha S and Jha, RM (2010) Electromagnetic Material Characterization Techniques for Honeycomb Structures. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Nair, RU and Venu, KS and Jha, RM (2006) EM Characterization of FRP Composite Samples with Novel Formulations. Technical Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Ningaiah, -- and Venkatasubramanyam, DV and Sastry, HSP and Mohiddin, Jaffer M and Rao, Ramakrishna BV (1982) Liner for filament wound vessels. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Padma, G and Pandare, KV and Ajay, Chandra and Sridhar, MK (1995) Synthesis of Liquid Crystalline Epoxy Resin and Properties13; Carbon Fiber Laminate. Technical Report. National Aerospace Laboratories, Bangalore, India.

Parameswara, MA and Pai, BC and Balasubramanian, N (1978) Preparation of alumina fibre by chemical tapor deposition. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Parida, BK and Prakash, Raghu V (1995) Evaluation of Bolt-Pull- Through Strength of Carbon Fibre Composite. Technical Report. National Aerospace Laboratories, Bangalore, India.

Pattanaik, S and Gopinathan, KG and Arunachalam, VS (1974) Dispersion hardened titanium alloys by powder metallurgy. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Paul, Subin (2005) Study of impedance based control for vibration reduction13;. Technical Report. National Aerospace Laboratories, Bangalore.

Paul, Tanusree and Jha, RM (2006) A Cross-Indexed Bibliography for Metamaterial Technology (1968-2006). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Pitchai, P and Gowda, MNN and Subba Rao, M (2009) Assembly process sheets for composite co-cured FIN of Tejas-Light Combat Aircraft (LCA). Technical Report. NAL.

Prakash, M. Rajendra and Murgan, Senthil and Rao, RMVGK (2007) NDT and Post Cure Report on HANSA-3 Aircraft Composite Components - Sl.No. 011. Project Report. National Aerospace Laboratories, Bangalore.

Prakash, M. Rajendra and Rao, RMVGK (2007) On Field Inspection of HANSA-3 Aircraft (VT-HNS) at IIT - Kanpur. Project Report. National Aerospace Laboratories, Bangalore.

Prakash, M.Rajendra and Murugan, Senthil and Rao, RMVGK (2006) HANSA-3 aircraft series productionisation program-support services (Postcure and NDT qualification). Project Report. National Aerospace Laboratories, Bangalore.

Prakash, M.Rajendra and Rao, RMVGK (2003) NDT report on the Nose Cone Radome for Jaguar Maritime Aircraft. Project Report. NAL, Bangalore.

Prakash, M.Rajendra and Revathi, A and Chandrakala, and Rao, RMVGK (2003) Material Characterization of the Radome Fairings (TDF & ADF) for HOMI TU-142M Aircraft. Project Report. NAL, Bangalore.

Radhakrishnan, G and Dinesh, BL and Srinivasa rao, A and Kotresh, Gaddikeri M and Sudheendra, HN and Subba Rao, M Master process sheets for fabrication of CFC centre fuselage parts of TEJAS (Light Combat Aircraft): part-2. Technical Report. NAL.

Rajendra, Prakash and Rao, RMVGK (2004) NDT Report on Hansa -3 (VT -HNX). Project Report. National Aerospace Laboratories, Bangalore.

Raman, PS and Kumari, Vasantha R (1981) Studies on the use of jute fibres for plastic reinforcement. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Raman, PS and Rangaraju, R and Kumar, Mohan S (1987) X-Radiography of composites13; 13; 13; 13; 13; 13; 13; 13; 13; 13; 13; 13; 13;. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Ramaswamy, Setty J and Christopher, Daniel and Venkatesh, S and Byji, Varughese and Dayananda, GN (2009) Assembly process sheets for composite co-cured FIN of Tejas-light combat aircraft (LCA). Technical Report. NAL.

Ramaswamy, Setty J and Dayananda, GN (2009) Design aspects of nitrogen reservoirs. Technical Report. NAL.

Ramesh, Sundaram et. al. (2009) Workshop on repair technology for composite structures- lecture notes-Vol.1 (Theory). Technical Report. NAL.

Ramesh, TG and Shubha, V (1986) Electronic properties of cerium and the kondo volume-collapse model. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Ramesh, TG and Shubha, V (1986) High pressure studies on magnetic and nonmagnetic metallic glasses. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Ramesh Chandra, .- and Viswanathan, KS and Gopalan, R (1985) Structural Testing of Radomes '3' and '4' Electronic Equipment Pod, Technical Report Part XI. Project Report. National Aerospace Laboratories, Bangalore.

Rao, R Ramachandra and Roopa, HN and Kannan, TS (1993) Processing and characterisation of ceramic slurries Part I : Particle size distribution of ceramic particles in13; ceramic slurries. Technical Report. National Aerospace Laboratories, Bangalore, India.

Rao, RMVGK (1988) Plant irrigation using FRP porous tubes: Interim report to KSCST. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Rao, RMVGK and Rajendra Prakash, M (1999) Comparative Evaluation Studies on Glass Micro (Imported) Vs-Erosil Powder (Indigeneous)used in the Development of Hansa Aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Rao, Sandhya and Rao, RMVGK (2003) IR radiation cure studies of Bi-functional epoxy resin systems. Project Report. National Aerospace LAboratories, Bangalore.

Raveendranath, U and Ramesh, R and Venu, KS and Jha, RM (2002) EM Characterisation Studies for Quartz C-14 Material System. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Raveendranath, U and Venu, KS and Jha, RM (2001) Material Characterisation based Preliminary EM design of J-Radome. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Ravi, Kumar P and Sathish, Nimbal S and Sudheendra, HN and Subbarao, M (2009) Master process sheets for fabrication of CFC centre fuselage parts of TEJAS (Light Combat Aircraft): part-3. Technical Report. NAL.

Revathi, A and Rao, RMVGK (2003) Fibre Weight Fraction Measurements on Travel Coupons of Nose Cone Radome for Jaguar Maritime Aircraft. Project Report. NAL, Bangalore.

Sajjan, Sangeetha S and Nair, RU and Jha, RM (2009) Electromagnetic Characterization Techniques for Chiral Media. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Samiullah, TH and Prakash, M.Rajendra and Murugan, Senthil and Rao, RMVGK (2006) HANSA-3 aircraft series productionisation program - Damage repairs. Project Report. National Aerospace Laboratories, Bangalore.

Samiullah, TH and Prakash, M.Rajendra and Rao, RMVGK (2006) Mechanical design data generation for wind mill turbine blade-11.5 mts (300 KW). Project Report. National Aerospace Laboratories, Bangalore.

Samiullah, TH and Prakash, M.Rajendra and Rao, RMVGK (2006) Quality monitoring of Mark-II doppler weather radar (DWR) radome panels. Project Report. National Aerospace Laboratories, Bangalore.

Samiullah, TH and Rao, RMVGK (2003) Development of a 7sq.m large PUF core panel for realization of Mark-I1 Radome for DWR. Project Report. National Aerospace LAboratories, Bangalore.

Samiullah, TH and Rao, RMVGK (2003) Pattern and Tooling Development for the Radome Fairings (TDF & ADF ) for HOMI TU- 142M Aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Sanjeev Kumar, S and Senthil Kumar, P and Ramesh Kumar, M (2008) Development of Facility for evaluating Characteristics of Ultrasonic Transducers. Project Report. National Aerospace Laboratories, Bangalore.

Sanjeev Kumar, S and Senthil Kumar, P and Ramesh Kumar, M and Sudheendra, HN (2008) Development of a facility for evaluating characteristics of ultrasonic transducers. Technical Report. NAL.

Senthil Kumar, P and Dayananda, GN (2008) High Frequency Actuation and Strain Rate Effects on Thin Shape Memory Alloy Wires. Project Report. National Aerospace Laboratories, Bangalore.

Senthil Kumar, P and Dayananda, GN and Kamalakannan, GM and Saji, D and Pruthvi, S and Subba Rao, M (2006) Preliminary Design and Fabrication Report on Repair Technology using Smart Actuators. Project Report. National Aerospace Laboratories, Bangalore.

Senthil Kumar, P and Dayananda, GN and Saji, D and Kamalakannan, GM and Subba Rao, M (2008) Aircraft Structural Repair Technology Using Smart Actuators. Project Report. National Aerospace Laboratories, Bangalore.

Senthil Kumar, P and Jayasankar, S and Kamaleshiah, MS and Satisha, - and Prashanth, NS and Alfred Paul, Singh (2010) Wind Tunnel Testing of SMA Actuated Trim-Tab for Hansa Aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Senthil Kumar, P and Kamath, GM (2008) Active Vibration Control of Model Support Structures for Wind Tunnel Applications. Project Report. National Aerospace Laboratories, Bangalore.

Senthil Kumar, P and Kamath, GM and Subba Rao, M (2007) Signal Processing and Spectral AnaTysTs Using dSPACE DS1102 DSP Board. Project Report. National Aerospace Laboratories, Banglaore.

Senthil Kumar, P and Manikandan, R (2007) Development of Closed Loop Temperature Control System for Composite Repair in LabVIEW Environment. Project Report. National Aerospace Laboratories, Bangalore.

Shubha, M and Vijayan, Kalyani (1989) X-ray analysis of heat-treated KEVLAR fibres. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Shubha, V and Ramesh, TG (1987) Controller for stabilization of high voltage. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Shubha, V and Ramesh, TG (1995) Fabrication of Thermo power Analyser for High Temperature Studies. Technical Report. National Aerospace Laboratories, Bangalore, india.

Shubha, V and Ramesh, TG (1988) Lovv temperature Set Up for Absolute TEP measurement13;. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Shuresh Chand, Jangir and Srinivasa, V and Ramachandra, H V and Ramesh Kumar, M and Sudheendra, H N (2009) Qualification of composite components of tejas (LCA): non-destructive evaluation. Technical Report. NAL.

Shylaja, Srihari and Vanaja, A and Rajendra, Prakash and Sugun, BS and Revathi, A and Kavitha, and Sandhya, Rao and Sendil, Murgan and Chandrakala, and Venkatasubramanyam, DV (2008) A Report on Industrial Test services under COMPAC Program from 2007-2008. Project Report. National Aerospace Laboratories, Bangalore.

Singh, AK (1993) Analysis of C60 Fullerite Compression Under Non-Hydrostatic Pressure. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Singh, AK (1993) The Lattice Strains in a Specimen (Cubic System) Compressed Non Hydrostatically in an opposed Anvil Device. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Singh, Akansha and Viswamurthy , SR (2011) Interlaminar Fracture Toughness Characterization of Unidirectional Carbon Fiber Reinforced Epoxy Composites. Project Report. CSIR-NAL, Bangalore.

Singh, Hema and Nair, RU and Jha, RM (2006) Phased Array Analysis and Material Characterization Studies for AEW&C Radome. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Sivasankaram, K (1993) Advanced ceramics - application prospects in engines. Project Report. National Aerospace Laboratories, Bangalore.

Srihari, Shylaja and Revathi, A and Murugan, M. Sendil and Rao, RMVGK (2005) Environmental Conditioning Composites and Components for Aerospace and Allied Fields. Project Report. National Aerospace Laboratories, Bangalore.

Srihari, Shylaja and Revathi, A and Prakash, M.Rajendra and Samiullah, TH and Murugan, Sendil and Rao, RMVGK (2006) Qualification Approach for Airborne Radomes (TDF Antenna Fairings (Radomes) of TU-142M aircraft). Project Report. National Aerospace Laboratories, Bangalore.

Srihari, Shylaja and Vanaja, A and Prakash, M.Rajendra and Sugun, BS and Revathi, A and Kavitha, - and Rao, Sandhya and Murugan, Senthil and Chandrakala, - and Rao, RMVGK (2007) Industrial Test Services - COMPAC Program. Technical Report. National Aerospace Laboratories, Bangalore, India.

Srihari, Shylaja and Vanaja, A and Prakash, M.Rajendra and Sugun, BS and Revathi, A and Kavitha, - and Rao, Sandhya and Murugan, Sendil and Chandrakala, - and Rao, RMVGK (2006) Industrial test services COMPAC Programme. Project Report. National Aerospace Laboratories, Bangalore.

Srikanth, L and Rajendra, Prakash and Sateesh, VL and Dayananda, GN (2011) Experimental studies On Glass Microballoon Filled Epoxy Composites. Project Report. National Aerospace Laboratories, Bangalore.

Srikari Tantri, P and Sheela, K Ramasesha (1998) Synthesis and Properties of Molybdenum Disilicide Based Composites. Technical Report. National Aerospace Laboratories, Bangalore, India.

Srinivas, CK and Jha, RM (2006) Materials and Coatings for IR Signature Reduction. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Srinivasan, C and Balasingh, C and Singh, AK (1979) Measurement of thickness of thin films by the x-ray diffraction method. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Stanley, C. Salem and Kowshik , BS and Gowda, MNN and Kotresh, Gaddikeri M and Ramesh, Sundaram and Devaiah, MC and Ramachandra, HV Evaluation of Fastener Pull Through Resistance of Aluminum. Technical Report. NAL Press.

Stanley, C. Salem and Sandeep Kumar, V and Sugun, BS and Ramesh, Sundaram and Ramachandra, HV and Devaiah , MC and Srinivasa, V and Ramesh Kumar, M Experimental Characterisation of GLass Aluminum REinforced (GLARE™) laminates. Technical Report. NAL Press.

Stanley, C. Salem and Sugun, BS and Sandeep Kumar, V and Viswamurthy , SR and Ramesh, Sundaram Low Velocity Impact Characterisation of Carbon/Epoxy Laminates processed through Resin Infusion Technique. Technical Report. NAL Press.

Stanley , C. Salem and Gowda, MNN and Ramachandra, HV and Kamath, GM Development of Carbon Fibre Metal Laminates (CFML): Design, Fabrication and Characterisation. Technical Report. NAL Press, NAL.

Stanley , C. Salem and Sugun, BS and Gowda, MNN and Kamath, GM Low Velocity Impact Studies on Carbon Fiber Metal Laminates. Technical Report. NAL press, NAL.

Structures Division, - (1985) Advanced Composite Technology Development Program. Project Report. National Aerospace Laboratories, Bangalore.

Subba Rao, M and Chandra, Ramesh (1986) Preliminary design of composite rudder for Do-228 aircraft x2013; part II. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Subba Rao, M and Chandra, Ramesh and Piening, M (1985) Preliminary design of composite rudder for DO-228 aircraft x2013; part I. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sudheendra, HN and Madhava, MR (1992) An ultrasonic c-scan system for the NDE of advanced composites. Project Report. National Aerospace Laboratories, Bangalore.

Sugun, BS and Rao, RMVGK (2006) DROP WEIGHT IMPACT TESTS ON T-800 CAI TEST SPECIMENS FOR LCA PROGRAMME. Project Report. National Aerospace Laboratories, Bangalore.

Sugun, BS and Rao, RMVGK (2006) Preliminary studies on glare composites. Project Report. National Aerospace Laboratories, Bangalore.

Sujith M, Syam and Singh, Hema and Jha , RM (2012) A Study of Antireflection and High Reflection Dielectric/Metamaterial Coatings. Project Report. CSIR-NAL, Bangalore.

Sunder, R (1985) Development of controllers for component fatigue testing facility for use in future R amp; D programme. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sunithamma, J and Joseph, Varsha Jose and Raveendranath, U and Jha, RM (2001) EM Material Characterisation based Determination of the Fabrication Tolerance of C-Radome. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Surendra, C and Rahul Kumar, C and Mohan Kumar, K and Rao, RMVGK (2006) CFRP Composite Components for SATCOM Programme. Project Report. National Aerospace Laboratories, Bangalore.

Tanushri , S and Rathore, Rahul and Singh, Hema and Jha , RM (2012) Electromagnetic Propagation Multilayered Dielectric-Metamaterial Media. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Tanushri , S and Rathore, Rahul and Singh, Hema and Jha , RM (2012) Electromagnetic Propagation in Classical Multilayered Media. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Thulasi Durai, D and Venkatesh, S and Byji, Varughese and Ramanaiah, B and Dayananda, GN (2009) Concepts for truss based aerofoil constructions. Technical Report. NAL.

Usha Devi, S and Balasingh, C (1993) Retained Austenite in Garret Engine Gears. Technical Report. National Aerospace Laboratories, Bangalore, India.

Vanaja, A and Rao, RMVGK (2007) Commissioning of a Contolled Strain Rheometer Equipment for Characterisation of Polymers , Pre-pregs and Composites. Documentation. National Aerospace Laboratories, Bangalore.

Vanaja, A and Rao, RMVGK (2007) Commissioning of a controlled strain rheometer equipment for characterization of Polymers, Prepregs and composites. Technical Report. National Aerospace Laboratories, Bangalore, India.

Vanaja, A and Rao, RMVGK Developmental studies on High temperature bis-maleimide resin Composites. Project Report. National Aerospace Laboratories, Bangalore.

Vanaja, A and Rao, Sandhya and Rao, RMVGK (2003) Glass Transition Temperature (T,) measurements on travel coupons of Nose Cone Radome for Jaguar Maritime Aircraft. Project Report. NAL, Bangalore.

Vanaja, A and Rao, Sandhya and Rao, RMVGK (2006) Installation and commissioning of conveyor-type microwave cure equipment at FRP. Project Report. National Aerospace Laboratories, Bangalore.

Vijayan, Kalyani and Mani, A and Balasingh, C and Singh, AK (1987) X-ray analysis of polycrystalline aluminium subjected to fatigue cycling. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Vijayan, Kalyani and Singh, AK and Panchapakesan, S and Janardhan, S and Kumar, N (1985) Software for AD/380 graphics system - (A) Quick actions for computer stimulation of transformation and (B) Fortran program for extracting coordinates of points of a graphic file. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Vinoy, KJ and Jha, RM (1995) Classification of Radar Absorbing Materials. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Vinoy, KJ and Jha, RM (1998) Determination of Radome Panel Performance based on Electromagnetic Material Characterisation Data for DWR Radome. Project Report. CSIR-NAL, Bangalore.

Vinoy, KJ and Jha, RM (1997) EM Characterisation of Candidate Radome Materials and Analysis of Radome Panel Performance for DWR Radome. Project Report. CSIR-NAL, Banaglore.

Vinoy, KJ and Jha, RM (1996) Electromagnetic Characterisation of Materials for DWR Radome. Project Report. CSIR-NAL, Bangalore.

Vinoy, KJ and Jha, RM (1994) Radar Absorbing Materials (RAM) - A Review. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Vinoy, KJ and Jha, RM (1994) Radar Absorbing Materials (RAM) - A Review. Technical Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Vinoy, KJ and Jha, RM (1994) Radar Absorbing Materials (RAM): A Cross-Indexed Bibliography (1956-1993). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Viswamurthy, SR and Siva, M and Ramachandra, HV (2013) Interlaminar Fracture Toughness Characterization of Unidirectional Glass Fiber Composite (S2/913 prepreg). Technical Report. CSIR-NAL, CSIR-NAL, Bangalore.

Viswamurthy , SR and Siva, M and Ramachandra, HV and Stanley, C. Salem (2013) Interlaminar Fracture Toughness Characterization of Unidirectional Carbon Fiber Composite (AS4/914 prepreg). Technical Report. CSIR-NAL, CSIR-NAL, Bangalore.

Viswamurthy , SR and Stanley, C. Salem and Kotresh, Gaddikeri M and Ramesh, Sundaram (2012) Damage Characteristics & Residual Compression Strength of CFRP Laminates manufactured using VERITy Subjected to Low Velocity Impact. Technical Report. CSIR-NAL, Bangalore.

Viswanathan, KS and Chandra, Ramesh (1986) Material characterisation of Carbon-Epoxy composites. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Thesis

Dayananda, GN (2008) NiTi Super Elastic Shape Memory Alloys for Energy Dissipation in Smart Systems for Aerospace Applications. PhD thesis, National Aerospace Laboratories.

Jyotsna Kiran, Mathad (2011) Studies on conductive polymer composites for advanced aerospace applications. PhD thesis, University of Mysore.

KavithaMol , S and Stanley, C. Salem (2011) Parametric Studies on Bird Impact Behavior of Aircraft Leading Edges. Masters thesis, National Aerospace Laboratories, Bangalore.

This list was generated on Sun Sep 21 01:04:52 2014 IST.