Items where Subject is "AERONAUTICS > Aircraft Propulsion and Power"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators Name | Item Type
Number of items at this level: 281.

Conference or Workshop Item

Aravind, KG and Giridhar, BG and Jay Raj Kumar , Singh Sodhi and Suresh, J and Mahendra , KV and Ramamurthy, S (1999) Computer Aided Design of Centrifugal Pump. In: National Conference of Pumps, 1999. (Submitted)

Arunkumar, V and Rajaneesh, MK and Radhakrishna, M and Jana, S (2004) Bolted Joint Stiffness Studies – An Experimental Approach. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, IIT Kanpur. (Submitted)

Arunkumar, V and Shashidhar, UG and Jana, S and Munirathnam, V and Mahesh, Mesta (2004) Feasibility Studies on Power Take Off Composite Shaft. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, IIT Kanpur. (Submitted)

Arunkumar, V and Swamy, RP (2000) Contoured land Squeeze film dampers- A probable candidate for obtaining better characteristics in gas turbine engines. In: NCABE – 2000, Hyderabad. (Submitted)

Ashutosh, Katari and Ramamurthy, S and Murugesan, K (1998) Design & Off-Design Performance Analysis of and Aero Engine. In: 4th National Conference on Air Breathing Engines and Aerospace Propulsion, December 1998, Bangalore. (Submitted)

Basava Prasad, SN and Veera Sesha Kumar, C and Karunakara, S (2012) Design and Analysis of a Composite Blade for Ram Air Turbine (RAT). In: National Conference on Developments and Opportunities in Civil Engineering, Applied Sciences And Mechanical Engineering , 18th -19th May, 2012, East West Institute of Technology.

Bikshapathi, Manupati and Karthik, N and Buddhadeb, Nath and Gopinath, PR and Mohan, SR and Koner, D (2009) Study of flow unsteadiness in a bifurcated Y-Shaped duct for a typical combat aircraft model. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2009), December 10-12, Bangalore,India.

Chakravarthi, AK and Ramamurthy, S and Selvaraj, C (2006) CFD Simulation of Micro Gas Turbine Recuperator. In: Proceedings of National Conference on CFD,Applications in Power and Industry Sector, November 17-18, 2006, BHEL,Hyderabad. (Submitted)

Dave Ashok, D and Muralidhara, HS and Ramamurthy, S (2006) Development of Tangential Injection Combustor for Micro Gas Turbine. In: Proceedings of National Conference on CFD,Applications in Power and Industry Sector, November 17-18, 2006, BHEL,Hyderabad. (Submitted)

Hanoca, P and Shobhavathy, MT (2011) CFD Analysis to investigate the effect of axial spacing in a single stage transonic axial flow compressor. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.

Hossain, J and Tran, LV and Carpenter, C and Wang, W and Verma, SB and Kapar, JS (2013) Numerical study of enhancement of regenerative cooling using ribs - AIAA 2013-3996. In: 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, 14-17 Jul 2013, San Jose, CA, USA.

Isaac, JJ and Chidananda, MS and Sridhara, K (1976) Flow visualization studies of bluff body flame holders. In: 3rd National Conference on Internal Combustion Engines and Combustion, 10-12 Dec 1976, Roorkee, India.

Isaac, JJ and Ramesh, NR and Krishnakumar, VS and Rajashekar, C and Shyamsundar , SR and Haran, AP and Sundararajan, V (1996) A Methodology for Afterburner Evaluation. In: 3rd National Conference on Air Breathing Engines and Aerospace , 28-30 December 1996, IIT, Chennai.

Isaac, JJ and Ramesh, NR and Krishnakumar, VS and Sreenath, GS and Rajashekar, C and Shyamsundar, SR and Subramanyam, JDA and Lazar, TC (1996) An Experimental Investigation of a Four Inlet, Side Dump Combustor of a Kerosene - Fuelled Boosted Ramjet. In: 3rd National Conference on Air Breathing Engines and Aerospace Propulsion, 28th to 30th December, Chennai.

Isaac, JJ and Ramesh, NR and Krishnakumar, VS and Sreenath, GS and Rajashekar, C and Shyamsundar , SR and Subramanyam, JDA and Lazar , TC (1996) An Experimental Study of the Performance of a Subscale Kerosene - Fuelled Ejector Ramjet at Simulated Takeoff. In: 3rd National Conference on Air Breathing Engines and Aerospace Propulsion , 28-30 Dec. 1996., IIT, Madras.

Isaac, JJ and Ramesh, NR and Rajashekar, C and Shyamsundar , SR and Baskaran, M and Simha, S and Venugopalan, P and Gollakota, S (1994) A Study of Supersonic Combustion of Hydrogen Injected Transversely into a Vitiated Airstream. In: 2nd National Conference on Air Breathing Engines and Aerospace Propulsion, 15th to 17th December 1994, Thiruvananthapuram.

Isaac, JJ and Ramesh, NR and Sreenath, GS and Rajashekar, C and Shyamsundar , SR and Baskaran, M and Venugopalan, P and Gollakota, S (1994) Interaction and Penetration of Fuel Jets in Supersonic Crossflows. In: 2nd National Conference on Air-breathing Engines and Aerospace Propulsion, December 1994, VSSC, Trivandrum.

Jana, S and Arunkumar, V (2003) Experimental Studies Related to the use of High Temperature Elastomers as External Damper for Rotating Systems. In: Proceedings of National Symposium on Rotor Dynamics, IIT Guwahati, India. (Submitted)

Jana, S and Arunkumar, V (2005) Studies on the Effect of Shaft Bow for a Multi Mass Flexible Rotor Model. In: Proceedings of the National Conference on Industrial Problems on Machines and Mechanisms, IIT Kharagpur. (Submitted)

Jana, S and Arunkumar, V and Ananda, M (2004) 5-Axes Levitation of a Rotor Towards Indigenisation of the Magnetic Bearing Technology. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, 05-07 November 2004, IIT Kanpur. (Submitted)

Jigar, Sura and Ramamurthy, S and Niyati, Shah (2010) Digital Simulation of Engine Operating Characteristics. In: 3rd International Conference on Advances in Mechanical Engineering (ICAME 2010), 4-6th January 2010, SVNIT,Surat.

Kamaleshiah, MS and Venkatrayulu, N and Ramamurthy, S (1988) An Improved Method of Centrifugal,Compressor Performance Prediction. In: 16th National Conference on FMFP, 1988.

Khan, AA and Shembharkar, TR (2004) Computation of High Speed Cold Cavity Flow with a Commercial CFD Code. In: 31st National Conference on Fluid Mechanics & Fluid Power, 16-18 Dec 2004, Jadavpur University, Kolkata, India.

Kodanda, B and Selvaraj, R (2003) Advances in Aircraft Engines since 1903. In: 100 Years since First Powered Flight (International Seminar) and Avances in Aerospace Sciences (Technical Seminar) & AeSI-55th AGM, December 2003, Bangalore.

Lakshminarasimha, R and Arunkumar, V and Jana, S and Bhaumik, SK and Ramaiah, KV (2004) Preliminary Studies on the Thermo-Mechanical Characteristics of Indigenously developed Shape Memory Alloy wires. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, IIT Kanpur. (Submitted)

Lakshminarayanan, R and Abdul, Nabi and Ramamurthy, S (2006) Development of a Recuperator for 10kW micro gas turbine. In: NCABE, December 2006.

Manas, Pradhan and Ramamurthy, S (2004) Stability and Control Analysis of Centrifugal Compressor. In: 7th National Conference on Air Breathing Engines and Aerospace Propulsion, November 2004, IIT,Kanpur. (Submitted)

Manjunath, P and Sathiyamoorthy, K and Venu, G and Venkat Iyengar, S and Jayaprakash, C and Srinivas, J and Pratheesh Kumar, P (2013) Establishment of aeropropulsion mach 3.6 test facility for high speed combustor research (AIAA 2013-2624). In: AIAA Ground Testing Conference, 24-27 June 2013, San Diego, CA.

Mohan, K and Guruprasad, SA (1994) Effect of axially non-uniform rotor tip clearance on the performance of a high speed axial flow compressor stage. In: ASME, International Gas Turbine and Aeroengine Congress and Exposition, 13-16 June 1994, Hague, Netherlands.

Muruganandam, M and Ramamurthy, S (2006) Air Bearing for High Speed Micro Gas Turbine. In: 5th National Seminar and Exhibition in Aerospace and Related Mechanisms, 2006, ISRO, Bangalore.

Murugesan, K and Ramamurthy, S (1995) Inception of Stall in a Centrifugal Impeller. In: 2nd National Conference on Air Breathing Engines, 1995, Melbourne, Australia. (Submitted)

Murugesan, K and Ramamurthy, S (1994) Spectral Fluctuations in Centrifugal Impeller Outlet Flows. In: 2nd National Conference on Air Breathing Engines and Aerospace Propulsion, December 1994, Trivandrum. (Submitted)

Murugesan, K and Ramamurthy, S and Sankaranarayanan, S (1992) An Airbreathing Engine for Aerospace Propulsion. In: 2nd National Conference on Air Breathing Engines and Aerospace Propulsion. (Submitted)

Nagendra, KS and Arunkumar, V and Jana, S and Mahesh, Mesta (2004) Application of Layer Damping Technique – An Experimental Study. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, IIT Kanpur. (Submitted)

Nagendra, KS and Jana, S and Arunkumar, V (2006) Vibration Reduction of Flexible Beams using Shape Memory Alloys. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, DIAT, Pune. (Submitted)

Nagendra, KS and Jana, S and Arunkumar, V (2006) Vibration reduction of flexible beams using shape memory alloys. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, 12-14 Dec 2006, Pune, India.

Nagpurwala, QH and Guruprasad, SA and Girigoswamy, H and Pai, BR (1995) Experimental and analytical studies of a transonic stator having controlled diffusion aerofoil with end bends. In: 12th ISABE - International Symposium on Air Breathing Engines, 10-15 Sept 1995, Melbourne, Australia.

Nagpurwala, QH and Shobhavathy, MT (2002) Some Experimental Studies on Airjet and Solid Body Vortex Generators. In: Proceedings of the Ninth Asian Congress of Fluid Mechanics.

Pai, BR (2009) Flying for the Common Man. In: International Symposium on Opportunities and Challenges Facing Aviation inustry in Indian Subcontinent, 18-20, 2009, Sreenidhi Institute of Science and Technology, Hyderabad.

Prathapanayaka, R and Chen, M Z and Xu , Liping and Anantha Murhy, MV and Jayaraman, M and Pai, BR (2001) DEVELOPMENT OF AN ADVANCED HIGH PRESSURE RATIO TRANSONIC FAN STAGE. PART-I: DESIGN AND ANALYSIS. In: Fifteenth International Symposium on Air Breathing Engines, 2 to 7-September-2001, Bangalore, India.

Prathapanayaka, R and Venkatesh, TN and Shembharkar, TR (2006) PARALLELIZATION OF A TURBOMACHINERY FLOW CODE ON NAL’S FLOSOLVER PARALLEL COMPUTER. In: Eight National Conference on Air Breathing Engines and Aerospace Propulsion.

Prathapanayaka, R and Vinodkumar, N and Krishnamurthy, SJ (2011) Design, analysis, fabrication and testing of mini propeller for MAVs. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.

Rahul, BV and Swapneel, Roy and Thanusha, MT and Khan, AA (2012) Unsteady Computation of over-Expanded flow in a convergent divergent nozzle. In: International Conference on Computing, Communications, Systems and Aeronautics, ICCCSA-2012, Hyderabad.

Rajagopal, P and Raja, S and Antony, Michael and Arunkumar, V (1995) Analytical and Experimental studies on cantilever type squeeze film Dampers. In: Fourth India MSC user’s conference. (Submitted)

Rajashekar, C and Bhaskaran, M and Srinivas, J and Prateesh Kumar, P and William Grips, VK and Aruna, ST and Venkat Iyengar, S Experimental studies on a liquid fuelled medium scaled valved pulsejet. In: 22 nd National Conference on IC Engines and Combustion, 10 - 13 December 2011, NIT Calicut.

Rajashekar, C and Janaki Rami Reddy, M and Raghukumar, HS and Isaac, JJ (2012) High Speed Shadowgraph Visualization of the Unsteady Flow Phenomena in a Valveless Pulsejet Engine. In: 15th International Symposium on Flow Visualisation, 25th -28th June 2012, Minsk, Belarus.

Rajashekar, C and Raghukumar, HS and Janaki Rami Reddy, M and Bhaskaran, M and Isaac, JJ (2013) High-Speed Shadowgraph Visualisation of Flow in a Miniature Hydrogen-Fuelled Valveless Pulsejet Engine. In: International Conference on Intelligent Unmanned Systems-ICIUS-2013, September 25 to 27, 2013, Jaipur, India.

Rajendran, R (2009) Flow Studies in a Centrifugal Compressor Stage. In: National Conference on Scientific Achievements of SC & ST Scientists and Technologists, 14-16 April 2009, Bangalore.

Rajendran, R and Ramamurthy, S and Mohanan, P (2008) Aerodynamic Investigation of Flow in a Centrifugal Compressor. In: 12th Asian Congress in Fluid Mechanics , August 18-21 2008, Daejeon,Korea.

Rajendran, R and Ramamurthy, S and Mohanan, P (2006) Flow Studies in a Centrifugal Compressor Stage. In: 33rd International Conference on Fluid Mechanics and Fluid Power, December 2006, IIT,Mumbai. (Submitted)

Rajendran, R and Ramamurthy, S and Sankaranarayanan, S (2001) Pressure fluctuations in centrifugal compressor diffusers. In: 15th International Symposium on Air Breathing Engines, 3-7 Sept 2001, Bangalore, India.

Ramachandra, MS and Swamy, KMM and Narasimha Swamy, MR and Paranjpe, PA (1981) The NAL transonic cascade tunnel. In: ICIASF 81: International Congress on Instrumentation in Aerospace Simulation Facilities, 30 September 1981, Dayton, USA.

Ramachandran, A and Ramamurthy, S and Rajeshwari Natarajan, S and Rajendran , R (2003) Development of High Speed Alternator for Gas Turbine Engine. In: 6th National Conference on Air Breathing Engines and Aerospace Propulsion, January 10-11th, IISC,Bangalore.

Ramamurthy, S and Arunkumar, V and Prabhu, BS Application of Aerodynamic foil bearing in high speed spindles of textile machinery –case study. In: International Conference on Tribology AUSTRIB 1994, Australia.

Ramamurthy, S and Bharat, Mhakwan (2008) Optimization of Recuparator Fin Geometry of Micro Gas Turbine. In: International conference for Aerospace Science and Technology, June 2008, Bangalore.

Ramamurthy, S and Murugesan, K (1996) Analytic Approach for the Design of Centrifugal Impellers. In: 3rd National Conference on Air Breathing Engines and Aerospace Propulsion, December 1996, IIT,Chennai.

Ramamurthy, S and Murugesan, K (1991) Characterisation of Unsteady Flows in Centrifugal Impellers. In: 6th National Convention of Aerospace Engineers, 24 & 25 January 1991, IIT,Bombay. (Submitted)

Ramamurthy, S and Murugesan, K (1993) Correlations for Flow Property Variation at Outlet of a Centrifugal Impeller. In: !X ISABE, September 1993, Tokyo,Japan. (Submitted)

Ramamurthy, S and Murugesan, K (1987) Turbomachinery Blade Profile Design. In: 3rd National Conference on Aerodynamics, 1987, IIT,Bombay. (Submitted)

Ramamurthy, S and Murugesan, K and Govardhan, M (1991) Characterisation of Rotating Stall in a Centrifugal Impeller. In: International Conference on Experimental Fluid Mechanics, June 17-21 1991, Beijing,China. (Submitted)

Ramamurthy, S and Murugesan, K and Prithviraj, D (1991) Flow Behaviour in Centrifugal Impellers. In: Tenth International Symposium on Air Breathing Engines, September 1-6, 1991, Nottingham,U.K.. (Submitted)

Ramamurthy, S and Murugesan, K and Prithviraj, D and Govardhan, M (1992) Slip Factor for Jet-Wake Flow in a Centrifugal Impeller. In: 1st National Conference on Air Breathing Engines and Aerospace Propulsion, December 1992. (Submitted)

Ramamurthy, S and Murugesan, K and Sankaranarayanan, S (1998) Design and Development of Distortion Screens for a Gas Turbine Engine Intake. In: 4th National Conference on Air Breathing Engines and Aerospace Propulsion, December 1998, Bangalore. (Submitted)

Ramamurthy, S and Rajendran, R and Dileep Kumar, RS (2008) Theoretical Evaluation of Flow Through centrifugal compressor stage. In: Proceedings of the International Conference on Aerospace Science and Technology, 26-28 Jun 2008, Bangalore, India.

Ramamurthy, S and Rajendran, R and Dilip Kumar, RS (2008) Theoritical evaluation of flow through centrifugal compressor stage. In: International conference for Aerospace Science and Technology , June 2008, Bangalore.

Ramamurthy, S and Rajendran, R and Murugesan, K and Narayanan, SS (2000) Flow Behaviour Near the Leading Edge of the Vaned Diffuser. In: 5th National Conference on Air Breathing Engines and Aerospace Propulsion, Dec 2000, Bangalore.

Ramamurthy, S and Sankaranarayanan, S and Murugesan, K (1987) Aerodynamic Design of High Pressure Ratio Centrifugal Compressors. In: 15th National Conference on Fluid Mechanics and Fluid Power,REC, 1987, Srinagar. (Submitted)

Ramamurthy, S and Sankaranarayanan, S and Murugesan, K and Ramachar, D and Rajendran, R Development of High Pressure ratio Centrifugal Compressor Stage. In: 4th National Conference on Air Breathing Engines and Aerospace Propulsion, 1998 December, Bangalore. (Submitted)

Ramamurthy, S and Sriharsha, AM (2009) Theoritical Evaluation of Flow Through Mixed Flow Compressor. In: 19th International Symposium on Air Breathing Engines, September 2009, Montrel,Canada.

Ramamurthy, S and Thennavarajan, S (2008) Cost Effective Method for Manufacturing Micro Gas Turbine Components. In: International Conference & Exhibition on Total Engineering,Analysis & Manufacturing Technologies(TEAMTECH 2008), September 2008, IISC,Bangalore.

Ramamurthy, S and Thennavarajan, S (2008) Design and Fabrication of cross corrugated recuperator fins for a micro gas turbine. In: 6th National Seminar & Exhibition on Aerospace Related Mechanisms(ARMS2008), February 2008, ARDE,Pune.

Sankaranarayanan, S and Ramamurthy, S and Murugesan, K (1981) Performance Testing and R&D Work on Centrifugal Compressor in Closed Circuit Test Rigs. In: 10th National Conference on FMFP. (Submitted)

Sankaranarayanan, S and Ramamurthy, S and Murugesan, K and Ramachar, D and Rajendran, R Flow Investigation in Centrifugal Compressor Diffuser. In: Workshop on Experimental Fluid Mechanics and Turbomachinery. (Submitted)

Sankaranarayanan, S and Ramesh, G and Roshan, Antony and Suraj, CS (2009) Advanced Research Areas for the Development of Autonomous Micro Air vehicles : An overview. In: International Symposium on opportunities and challenges facing aviation industry in indian subcontinent, 18-20, Sreenidhi Institute of Science and Technology, Hyderabad.

Sathiyamoorthy, K and Jayaprakash, C and Khan, AA and Venkat Iyengar, S and Srinivas, J and Pratheesh Kumar, P and Manjunath, P (2013) Development of Mach 3.6 water cooled Facility Nozzle. In: National Propulsion Conference 2013, 21 Feb 2013, Indian Institute of Madras, Chennai.

Sathiyamoorthy, K and Jayaprakash, C and Manjunath, P and Srinivas, J and Pratheesh Kumar, P (2013) Development of Combustion Driven Heating System for Semi-Free Jet Test Rig. In: National Propulsin Conference 2013, 21 Feb 2013, Indian Institute of Madras, Chennai.

Sathiyamoorthy, K and Srinivas, J and Baskaran, M and Manjunath, P (2011) Development of Gasdynamic Probe for Total Temperature Measurement in gases. In: SET 2011- National Conference on Emerging Trends in Propulsion Technology, 18 Jun 2011, LPSC, Mahendragiri.

Sathiyamoorthy, K and Venkat Iyengar, S and Manjunath, P (2012) Annular Supersonic Ejector Design and Optimization. In: Proceedings of ASME 2012 Gas Turbine India Conference, 01 Dec 2012, Mumbai, Maharashtra, India.

Shashidhara, KN and Radhakrishna, M and Sarangi, AK (2006) Bump foil bearings for high speed and low load applications - A preliminary feasibility study. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, 12-14 Dec 2006, Pune, India.

Shivaprasad, GK and Radhakrishna, M and Jana, S and Arunkumar, V (2006) Nut Factor Studies in Bolted Joints. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, DIAT,Pune. (Submitted)

Shivaprasad, GK and Radhakrishna, M and Jana, S and Arunkumar, V (2006) Nut factor studies in bolted joints. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, 12-14 Dec 2006, Pune, India.

Sivapragasam, M and Ramamurthy, S and Deshpande, MD and Sridhara, SM (2009) Computation of Turbulent Jets in Annual Counter Flow. In: 11th Annual CFD Symposium, 11-12th August 2009, IISC,Bangalore.

Sreenivasan, NR (1974) Analysis of the strength of turbine wheels and hubs. In: Seminar on the Role of Computers in Structural Analysis, Design and Optimisation, 13-14 June 1974, Bangalore.

Sridhara, K and Chidananda, MS (1981) Fresh mixture entrainment in a jet curtain flameholder. In: International Symposium on Air Breathing Engines, 16-22 Feb 1981, Bangalore, India.

Srinivas, J and Manjunath, P (2011) Experimental Demonstration of the Concept of Endothermic Fuels for Providing Efficient Cooling to Scramjet Combustors. In: INTERNATIONAL CONFERENCE ON ADAPTIVE TECHNOLOGIES FOR SUSTAINABLE GROWTH, 16 Jun 2011, Namakkal, Tamil Nadu, India.

Srinivas, J and Prateesh Kumar, P and Sathiyamoorthy, K and Venu, G (2013) Development of automated test sequence for mach 3.5 propulsion test facility. In: International Symposium on Air Breathing Engines (ISABE-2013-1306), 9-13 Sep. 2013, Busan, Korea.

Subrahmanyam, S and Moorthy, GK (1974) Erosive burning of complex configuration of solid propellant grains. In: NBS 1974, 21-22 Jun 1974, Pune, India.

Sudheendra, VS and Ramamurthy, S and Murugesan, K (1999) Transient Thermal Analysis of a Turbine Rotor. In: NAL-CAE Workshop, Bangalore. (Submitted)

Veera Sesha Kumar, C and Tijare, Vijay and Dilipkumar, BA and Janaki Rami Reddy , M and Jayaraman, M (2013) Bearing Failure Investigation of Turbomachinery Test Rig. In: ASME 2013 Gas Turbine India Conference, December 5-6, 2013, NAL, Bengaluru.

Venkat Iyengar, S and Sathiyamoorthy, K and Srinivas, J and Prateesh Kumar, P and Muthu Selvan, G and Muralidhara, HS and Manjunath, P (2013) Experimental Investigation of Spray Characteristics in Subsonic Crossflows. In: National Propulsion Conference, Feb 2013 , IIT, Chennai.

Venkat Iyengar, S and Sathiyamoorthy, K and Srinivas, J and Sharma, A (2013) Penetration and drop size distributions of liquid jets in high subsonic crossflows. In: International Symposium on Air Breathing Engines - 21st (ISABE 2013-1301), 9-13 Sep. 2013, Busan, Korea.

Journal Article

Arunkumar, V and Kaushal, SC (1987) Experimental Study on the behavior of damper bearing plane stiffness in squeeze film mounted rotor systems. International journal of Turbo and Jet Engines, 4 . ISSN 03340082 (Submitted)

Arunkumar, V and Kaushal, SC and Lakshmikantan, K (1985) Experimental analysis of damper behavior of squeeze film dampers for gas turbine engines. Journal of Engineering for Gas Turbine and Power, 107 (1). pp. 165-170. ISSN 0742-4795

Balasubramanian, TS and Arunkumar, V and Jayaraman, M (1996) Anti Resonance concept applied to rotors. Journal of the Aeronautical Society of India, 48 (2). pp. 158-160.

Jana, S and Arunkumar, V (2005) 5-Axes Levitation of a Rotor by Active Magnetic Bearings Employing Direct Output Feedback Control. Journal of Aerospace Sciences and Technologies . (Submitted)

Krishnamoorthy, V and Sukhatme, SP (1989) Effect of free-stream turbulence on gas turbine blade heat transfer. Journal of Turbomachinery, 111 . pp. 497-501.

Manjunatha, CM (2006) Fatigue crack growth prediction under spectrum load using crack driving force DK 13;. AIAA Journal, 44 (2). pp. 396-399. ISSN 0001-1452

Pai, BR (1984) Utilisation of sludge gas for power generation through aero gas turbines. 13;. Sadhana - Academy Proceedings in Engineering Sciences, 7 (pt 3). pp. 223-236.

Pai, BR and Ramachandran, BR and Velpari, V and Balasubramanian, N (1984) Preparation of boron trichloride. 13;. Indian Journal of Technology, 22 (6). pp. 233-235.

Rajeswari, B and Prabhu, KR (1987) Optimum Flap Schedules and Minimum Drag Envelopes for Combat Aircraft. Journal of Aircraft, 24 (06). pp. 412-414.

Ratan, J and Jagadeesh, G (2012) Investigations on supersonic combustion in a combustion-driven shock tunnel. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 226 (9). pp. 1183-1191.

Roy, Swapneel and Thanusha, MT and Rahul, BV and Khan, AA (2013) Effect of Shocks on Mixing and Thrust in Over-expanded Nozzles. Frontiers in Aerospace Engineering, 2 (2). pp. 136-142. ISSN 2325-6796

Sivapragasam, M and Deshpande, MD and Sridhara, SN and Ramamurthy, S (2008) Numerical And Experimental Studies on an Aerodynamic Distortion Grill. Journal of Aerospace sciences and Technology, 60 (3). ISSN 1735-2134

Verma, SB and Stark, R and Haidn, O (2012) Gas Density Effects on Dual-Bell Transition Behavior. Journal of Propulsion and Power, 28 (6). pp. 1315-1323. ISSN 0748-4658

Patent

Council of Scientific and Industrial Research, India (1986) An improved device for measuring flow rates of fluids. 158/MAS/82.

Council of Scientific and Industrial Research, India (1990) A turbine blade having inbuilt cooling arrangements. 1055/DEL/85.

Proj.Doc/Technical Report

Abbey, DK and Sinnappan, PV and Rao, KVL (1979) Laboratory testing of fuels. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Anbarasu, M and Pai, BR (1990) A Method for designing transonic compressor blade propiles. Project Report. National Aerospace Laboratories, Bangalore.

Arun Kumar, V and Antony, Michael and Sankunni, U P and Ananda, M (1993) Experimental evaluation of static stiffness of cylindrical type of squeeze film damper rings. Project Report. National Aerospace Laboratories, Bangalore.

Arunkumar, V and Rajagopal, P (1985) Computer program for prediction of DMPED critical speeds of rotor systems. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Ashbaugh, NE and Dattaguru, B and Khobeib, M and Nicholas, T and Prakash, Raghu V and Ramamurthy, TS and Seshadri, BR and Sunder, R (1995) Experimental and Analytical Estimates of Fatigue13; Crack Closure in an Aluminium-Copper Alloy Part-1: Laser Interferometry and Fatigue Crack Closure. Technical Report. National Aerospace Laboratories, Bangalore, India.

Balaji, Sankar and Thennavarajan, S and Vijayendranath, V and Brijeshkumar , Shah and Khan, AA and Jana , Soumendu and Ramamurthy, S (2013) Aero-Thermodynamic modeling and gas path simulation for a twin spool turbo jet engine. Project Report. National Aerospace Laboratories, Bangalore.

Balakrishna, S and Shaila, MS and Santharam, A (1972) A two channel data processing system for the fixed base research simulator. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Balakrishna, S and Varute, PT and Santharam, A and Samraj, AC and Bakshi, DV (1972) Analysis of linkage for a three degree of freedom motion simulator. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Balasubramanian, TS (1994) Structural Design and Analysis of NAL's Light Aircraft NALLA2. Project Report. National Aerospace Laboratories, Bangalore.

Beckers, FA (1978) Alternative fuels. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Chandrappa, BK and Krishnamurthy, SJ and Krishnamoorthy, V and Murthy, MVA and Murugesan, K and Pai, BR and Ramachandra, MS and Ramamurthy, S and Swamy, KMM and Shambarkar, TR and Soundranayagam, S (1991) Aerodynamic and Heat Transfer Studies on HUB sections of a high pressure turbine blade: summary report. Project Report. National Aerospace Laboratories, Bangalore.

Chandrappa, BK and Krishnamurthy, SJ and Krishnamoorthy, V and Murthy, MVA and Murugesan, K and Pai, BR and Ramachandra, MS and Ramamurthy, S and Swamy, KMM and Shembharkar, TR and Soundranayagam, S (1992) Aerodynamic and Heat Transfer Studies of HPT Rotor and Stator Blades of GTX-35-VS Engine. Project Report. NAL, NAL Bangalore.

Chidananda, MS and Jaganatha Rao, B and Venkatesh, S and Krishna Kumar, VS and Davis, A (1995) Performance of GTX- 35 VS Engine Scaled Nozzles. Project Report. National Aerospace Laboratories, Bangalore.

Chidananda, MS and Jaganatha Rao, B and Venkatesh, S and Muralidhara, HS and Krishnamumar, VS (1996) Scaled model tests of the kaveri engine 2D-CD thrust vectoring nozzle. Project Report. National Aerospace Laboratories, Bangalore.

Chidananda, MS and Jagannatha Rao, B and Venkatesh, S and Krishna Kumar, VS (1992) Calibration of Orifice meter for the Ground AIR supply unit of GTRE. Project Report. National Aerospace Laboratories, Bangalore.

Chidananda, MS and Jagannatha Rao, B and Venkatesh, S and Krishna Kumar, VS and Varadaraju, TK and Ranganayakalu, K (1994) Performance tests of the LCA- ECS heat exchanger duct with simulation of primary heat exchanger pressure drop. Project Report. National Aerospace Laboratories, Bangalore.

Chidananda, MS and Jagannatha Rao, B and Venkatesh , S and Krishna Kumar, VS (1988) Static tests of the ada 1/3 scale document no. Aircraft intake model. Project Report. National Aerospace Laboratories, Bangalore.

Chidananda, MS and Krishnakumar, VS and Jagannatha Rao, B and Muralidhara, HS and Venkatesh, S (1992) Air Mass Flow Calibration of the 1 : 6 scale LCA intake model. Project Report. National Aerospace Laboratories, Bangalore.

Chidananda, MS and Venkatesh, S and Jagannatha Rao, B and Krishna Kumar, VS (1996) Combustion of a high aromatic fuel in a Gas Turbine Combustor. Project Report. National Aerospace Laboratories, Bangalore.

Chidananda, MS and Venkatesh, S and Jagannatha Rao, B and Krishna Kumar, VS (1993) Design and Development of an Airblast Atomiser for the KAVERI engine and the sectoral combustor tests. Project Report. National Aerospace Laboratories, Bangalore.

Chidananda, MS and Venkatesh, S and Jagannatha Rao, B and Krishna Kumar, VS (1986) Effect of Fuel Aromatic Content on Flame Tube Metal Temperatures. Project Report. National Aerospace Laboratories, Bangalore.

Chidananda, MS and Venkatesh, S and Krishna Kumar, VS (1988) Development of an Ejector for the ADA intake model static tests. Project Report. National Aerospace Laboratories, Bangalore.

Gallus, HE and Ramamurthy, S (1980) Closed Circuit Test Facility for Testing supersonic Axial compressors. Project Report. Aachen Techincal University.

Girigoswami, H (1988) Orthogonal grid generation using mathematical flow modelling. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Girigoswami, H (1986) Through flow analysis within axial flow turbomachinery blade rows. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Isaac, JJ (1991) Scramjet combustors: An R&D Perspective. Project Report. National Aerospace Laboratories, Bangalore.

Isaac, JJ and Chidananda, MS and Sridhara, K (1976) Oil flow visualization studies of the characteristics of flow around bluff body flame holders. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Isaac, JJ and Paranjpe, PA (1978) Cycle optimization a solar turbopack. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Isaac, JJ and Rajashekar, C and Manjunath, P and Srinath, GS and Sathiyamurthy, K and Venu, G and Baskaran, M and Srinivas, J and Prateesh, Kumar (2009) Pilot ignition development and full scale AB testing. Technical Report. National Aerospace Laboratories, Bangalore.

Isaac, JJ and Ramesh, NR (1998) Investigative Ramjet tests of the ERJV Ejector Ramjet. Project Report. National Aerospace Laboratories, Bangalore.

Jagannatha Rao, B and Chidananda, MS (1989) Calibration of Pitot -static probes for HAL Koraput. Project Report. National Aerospace Laboratories, Bangalore.

Jagannatha Rao, B and Chidananda, MS Calibration of fuel bulk meter hal overhaul division 1995. Project Report. National Aerospace Laboratories, Bangalore.

Jagannatha Rao, B and Chidananda, MS (1994) Calibration of pitot-static probes for 4 BRD Kanpur. Project Report. National Aerospace Laboratories, Bangalore.

Jagannatha Rao, B and Chidananda, MS and Krishna Kumar, VS Calibration of pitot – static probes for H.A.L., Koraput. Project Report. National Aerospace Laboratories, Bangalore.

Jagannatha Rao, B and Krishna Kumar, VS and Chidananda, MS (1988) Calibration of pi tot-static probes for H.A.L., Koraput. Project Report. National Aerospace Laboratories, Bangalore.

Jagannatha Rao, B and Rao, KVL (1986) Calibration of fuel flow metering RIG for HAL Bangalore. Project Report. National Aerospace Laboratories, Bangalore.

Jagannatha Rao, B and Venkatesh, S and Chidananda, MS (1990) Calibration of Pitot static probes for HAL, Koraput. Project Report. National Aerospace Laboratories, Bangalore.

Jagannatha Rao, B and Venkatesh, S and Chidananda, MS (1988) Calibration of pitot static probes for HAL- Bangalore. Project Report. National Aerospace Laboratories, Bangalore.

Jana , Soumendu and Radhakrishna, M and Ananda, M and Munirathnam, V and Kulkarni, SS and Manikandan, LP and Arunkumar, V (2009) Active magnetic bearings for the vertical sodium pump (50 m3/h capacity) - Test rig design. Technical Report. National Aerospace Laboratories, Bangalore.

Jayaraman, M (1993) Critical Speed Analysis of a Turbine Rotor. Project Report. National Aerospace Laboratories, Bangalore.

Khan, AA and Vyas, VK and Muthu Selvan, G and Satish Kumar, M and Hariharan, R and Muralidhara, HS Design and erection of exhaust system for small gas turbine engine test facility. Project Report. National Aerospace Laboratories, Bangalore.

Krishna Kumar, VS and Jagannatha Rao, B and Chidananda, MS (1987) Calibration of flowmeters Jaguar Project (H.A.L)BANGALORE. Project Report. National Aerospace Laboratories, Bangalore.

Krishnamoorthy, V (1981) Influence of aerodynamic parameters on the heat transfer in gas turbine blade cascade. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Krishnamoorthy, V and Jagannatha Rao, B and Chidananda, MS (1988) An isobar contour plot progrz. Project Report. National Aerospace Laboratories, Bangalore.

Krishnamurthy, K and Dasannacharya, BS (1972) Guy wire tension measuring system. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Krishnamurthy, SJ and Murthy, MVA (1991) Theoretical predictions of flow distribution in cascades of HP turbine blade HUB section. Project Report. National Aerospace Laboratories, Bangalore.

Krishnamurthy, V and Sukhatme, SP (1987) The effect of free stream turbulence on gas13; turbine blade heat transfer. Technical Report. National Aerospace Laboratories, Bangalore, India.

Kulkarni, SS and Manikandan, LP and Radhakrishna, M and Munirathnam, V and Ananda, M and Jana, S and Varadarajan, MN and Arunkumar, V (2009) Evaluation of tapered rolling element bearings for probable application in LCA naval version. Technical Report. National Aerospace Laboratories, Bangalore.

Lingarkar, E and Sankaranarayanan, S Cryogenic Turbopump Testing at NAL. Project Report. National Aerospace Laboratories, Bangalore.

Manickam, MD and Murugesan, K (1977) Subsonio cascade tunnel at NAL (present status). Technical Report. National Aeronautical Laboratory, Bangalore,India.

Mohan, K (1986) Design of an axial flow research compressor operating in the subsonic and transonic ranges. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Mohan, K and Nagpurwala, QH and Girigoswamy, H and Guruprasad, SA (1981) High speed axial flow compressor research facility. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Muralidhara, HS and Chidananda, MS (1988) Equilibrium in a chemically reacting system. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Muralidhara, HS and Isaac, JJ and Chidananda, MS (1993) Parametric study of RAM rocket performance. Project Report. National Aerospace Laboratories, Bangalore.

Muralidhara, HS and Jagannatha Rao, B and Chidananda, MS and Krishna Kumar, VS (1996) Design and Calibration of a three component load cell. Project Report. National Aerospace Laboratories, Bangalore.

Murthy, MVA and Srinivasa, C (1985) Mach number distribution on blade to blade surface of a turbine stator pasage. Project Report. National Aerospace Laboratories, Bangalore.

Murthy, MVA and Srinivasa, C (1986) Relative Flow Mach Number Distribution on the Blade PD PR 8606 Profiles of a Turbine Stage. Project Report. National Aerospace Laboratories, Bangalore.

Murthy, MVA and Subramanian, PS (1991) Instrumentation for kaveri HP turbine stage test. Project Report. National Aerospace Laboratories, Bangalore.

Murthy, MVA and Thunga, KS (1990) Design review on the project turbo power pack Phase I. Project Report. National Aerospace Laboratories, Bangalore.

Murthy, MVA and Thunga, KS and Murthy, SJK (1989) Turbo power pack - Phase I. Project Report. National Aerospace Laboratories, Bangalore.

Murthy, SJK and Murthy, MVA and Shembharkar, TR (1989) Theoretical Evaluation of H.P Turbine Blade profiel sections for GTX-35 VS Engine. Project Report. National Aerospace Laboratories, Bangalore.

Murugesan, K (1994) Structured program for the development of compact jet engines for unmanned vehicles. Project Report. National Aerospace Laboratories, Bangalore.

Murugesan, K and Ramamurthy, S Component Drawings for Compact By-Pass Engine. Project Report. NAL, NAL Bangalore. (Submitted)

Murugesan, K and Ramamurthy, S Determination of Pressure Distribution on Blade Cascades. Project Report. NAL, NAL Bangalore. (Submitted)

Murugesan, K and Ramamurthy, S (1978) T 18-A Turbocharger Performance Evaluation. Technical Report. NAL, NAL Bangalore. (Submitted)

Murugesan, K and Ramamurthy, S (1984) Theoretical Evaluation of Turbine Blade Profiles. Project Report. NAL, NAL Bangalore.

Murugesan, K and Ramamurthy, S and Murthy, V V S and Rajendran, R (1990) Velocity distribution over GTX-35-VS HPT stage profiles. Project Report. National Aerospace Laboratories, Bangalore.

Murugesan, K and Ramamurthy, S and Murthy, VSS and Rajendran, R (1990) Velocity Distribution Over GTX-35-VS-HPT Stage Profiles. Project Report. NAL, NAL Bangalore. (Submitted)

Murugesan, K and Ramamurthy, S and Sankaranarayanan, S (1999) Cavitation Characteristics and Performance of Cryogenic Engine Pumps and Inducers. Project Report. NAL, NAL Bangalore. (Submitted)

Murugesan, K and Ramamurthy, S and Sankaranarayanan, S Feasibility study of small gas turbine engine development. Project Report. NAL, NAL Bangalore. (Submitted)

Murugesan, K and Sankaranarayanan, S and Ramamurthy, S (1991) Aerodynamic Investigations of High Pressure Ratio Centrifugal Compressor. Project Report. NAL, NAL Bangalore. (Submitted)

Nagpurwala, QH (1987) Non-nulling calibration of a two-dimensional combination wedge probe. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Nagpurwala, QH (1986) Pressure velocity flow direction and mass flow measurements in cascade and turbomachinery testing. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Nagpurwala, QH (1988) Recovery characteristics of three shielded thermocouple13; temperature probes. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Nichi, SC and Paranjpe, PA (1973) Experimental determination of attitude angle in an externaly pressure used air journal bearing. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Nichi, SC and Paranjpe, PA (1973) Experimental determination of attitude angle in an externaly pressure used air journal bearing. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Pai, BR and Krishnamoorthy, V and Paranjpe, PA (1978) Development of gas turbine combustor operating on gasified coal : Test results on modified avon combustor at atmospheric pressure. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Pai, BR and Rajagopalan, SR and Rajanna, D (1985) Proposal for Deelopment of Novel techniques for cooling turbine blades. Project Report. National Aerospace Laboratories, Bangalore.

Pai, BR and Rajagopalan, SR and Rajanna, D (1985) Proposal for development of novel techniques for cooling turbine blades. Project Report. National Aerospace Laboratories, Bangalore.

Prathapanayaka, R and Krishnamurthy, SJ and Vinodkumar, N (2009) Design and Development of Propeller for NAL-Micro Air Vehicle. Technical Report. NAL, Bangalore.

Prathapanayaka, R and Nagpurwala, QH and Shembharkar, TR (2006) Analytical Design and Evaluation of a Controlled Diffusion Aerofoil Blade for a LP Compressor Stator. Technical Report. NAL, Bangalore.

Prathapanayaka, R and Shembharkar, TR (2005) CFD ANALYSIS OF A CONTROLLED DIFFUSION AEROFOIL. Technical Report. NAL, Bangalore.

Prathapanayaka, R and Shembharkar, TR (2005) CFD Analysis of a high pressure ratio fan stage. Technical Report. NAL, Bangalore.

Prathapanayaka, R and Venkatesh, TN and Shembharkar, TR (2005) Parallelization of the Dawes Code ‘un_b3d_ke’ on NAL Flosolver Parallel Computers. Technical Report. NAL, Bangalore.

Prathapanayaka, R and Vinodkumar, N and Mohan Kumar, K and Krishna Murthy, SJ (2010) Design and Development of Propeller for NAL-Micro Air Vehicle, Part II: Performance Evaluation of Indigenous Propellers (NAL-MAV-PR01). Technical Report. NAL, Bangalore.

Prathapanayaka, R and Vinodkumar, N and Payal , Agarwal and Hari Krishna, N (2010) CFD Analysis of Micro Air Vehicle Propellers. Technical Report. National Aerospace Laboratories,CSIR, National Aerospace Laboratories,CSIR.

Propulsion, - (2007) Second review on research projects on kaveri programme. Project Report. National Aerospace Laboratories, Bangalore.

Radhakrishna, M and Ananda, M and Munirathnam, V and Sarangi, A and Jana, S and Arunkumar, V (2009) Bump Foil Bearings – Feasibility Study to Achieve Rotor Speed in Excess of 50,000 rpm for Low Load Applications. Project Report. NAL, NAL Bangalore.

Rajamurthy, S and Sankaranarayanan, S and Murugesan, K (1986) Aerodynamic design of high ratio centrifugal compressors. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Rajashekar, C and Baburajan, T and Raghukumar, HS and Bhaskaran, M and Isaac, JJ (2012) Development of a Novel Shadowgraph Technique for Unsteady Flow Phenomena Studies in a Pulsejet Engine. Documentation. National Aerospace Laboratroies, India. (Unpublished)

Rajashekar, C and Oommen, Charlie and Amar, S and Raghukumar, HS and Isaac, JJ (2012) Developmental studies on HAN (hydroxyl ammonium nitrate) monopropellant micro thrusters – A preliminary investigation. Technical Report. National Aerospace Laboratories, Bangalore, Bangalore.

Rajashekar, C and Venkat, Iyengar and Raghu, Kumar (2011) DEVELOPMENTAL STUDIES ON PULSEJET ENGINE. Project Report. National Aerospace Laboratories. (Submitted)

Rajesh, E and Pandian, K (2010) Experimental evaluation for the performance of dust separator. Project Report. NAL, Bangalore.

Ramachandra, MS and Narasimha swamy, MR (1985) Calibration of a 6 mm wedce probe for cascade wake measurements. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Ramamurthy, S (1980) Closed Circuit Test Facility. Project Report. Kyushu University. (Submitted)

Ramamurthy, S and Murugesan, K (1986) Design of Turbine Rotor. Project Report. National Aerospace Laboratories, Bangalore.

Ramamurthy, S and Murugesan, K (1979) Profile Loss Evaluation for T3-40 Profile. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Murugesan, K (1979) Secondary Loss Evaluation for T3-40 Profile. Technical Report. NAL, NAL Bangalore.

Ramamurthy, S and Murugesan, K (1978) Test Facility For Turbocharger. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Murugesan, K (1984) Theoretical Evaluation of Rotor Blade Profiles. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Murugesan, K (1984) Theoretical Evaluation of Stator Blade Profiles. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Murugesan, K (1984) Turbomachinery Blade Profile Design. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Murugesan, K and Rajendran, R (1988) Design and Analysis of LPT Blade profiles. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Murugesan, K and Rajendran, R (1986) Design of Turbine Rotor Blade profiles. Project Report. NAL, NAL Bangalore.

Ramamurthy, S and Murugesan, K and Sankaranarayanan, S (1986) Computer Aided Design of Centrifugal Impellers. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Murugesan, Y and Geetha, R (1981) Development of an instrument for measuring the concentration of gases in a two-component mixture. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Ramamurthy, S and Rajendran, R and Rajesh, E and Janaki, Rami Reddy and Thennavarajan, S and Nitesh, Kumar and Daniel, Manoharan (2009) Experimental Evaluation of Thermal Performance of Regenerative Heat Exchanger. Project Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Rajendran, R and Rajesh, E and Janaki, Rami Reddy and Thennavarajan, S and Nitesh, Kumar and Daniel, Manoharan (2009) Experimental evaluation of thermal performance of regenerative heat exchanger. Technical Report. National Aerospace Laboratories, Bangalore.

Ramamurthy, S and Sankaranarayanan, S and Murugesan, K (1986) Aerodynamic Design of High Pressure Ratio Centrifugal Compressors. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Sankaranarayanan, S and Murugesan, K (1986) Aerodynamic Design of High Pressure Ratio Centrifugal Compressors. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Sankaranarayanan, S and Murugesan, K (1989) Comparative Performance Evaluation of Gas Turbine Engine Starters. Project Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Sankaranarayanan, S and Murugesan, K and Ramachar, D (1986) Performance evaluation of centrifugal compressors. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Ramamurthy, S and Thennavarajan, S and Vijaykrishna, K and Janaki , Rami Reddy and Nitesh, Kumar (2009) Experimental evaluation of thermal performance of pre-cooler heat exchanger. Technical Report. National Aerospace Laboratories, Bangalore.

Rao, KLV and Chidananada, MS and Jagannatha Rao, B (1986) Multifunction nozzles. Project Report. National Aerospace Laboratories, Bangalore.

Rao, KVL (1985) Innovation trails test rig for aeroengines (ITTRA). Technical Report. National Aeronautical Laboratory, Bangalore, India.

Rao, KVL and Abbey, DK (1977) Fuel injector development for low emission gas turbine combustors. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Rao, KVL and Chidananda, MS and Venkatesh, S and Jagannatha Rao, B and Shyamsundar , SR and Krishna Kumar, VS (1986) Studies on Combustion of Polymeric Fuel with Secondary Air Injection. Project Report. National Aerospace Laboratories, Bangalore.

Rao, KVL and Sudha, R and Jagannatha, Rao (1985) A Light Scattering Technique for the Measurement of SMD13; in Sprays. Technical Report. National Aerospace Laboratories, Bangalore, India.

Rao, Narayana T and Seshadri, Sharada (1986) Calibration of pressure transducers of transonic cascade tunnel. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Rao, RMVGK and Pourassamy, A (1975) Studies on the curing of loaded polyster binder. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sankaranarayanan, S and Ramamurthy, K and Murugesan, K (1985) Performance Evaluation of Centrifugal Compressor Using computer-Aided Testing (CAT) in Clocter Facility. Technical Report. National Aerospace Laboratories, Bangalore, India.

Sankaranarayanan, S and Ramamurthy, S and Murugesan, K (1991) Design and Development of an Industrial Centrifugal Compressor. Technical Report. NAL, NAL Bangalore. (Submitted)

Sankaranaryanan, S and Murugesan, K and Ramamurthy, S (1993) Flow Distortion Studies in KAVERI Engine Inlet Duct for Intake-Engine Compatibility. Project Report. NAL, NAL Bangalore.

Sankarnarayanan, S and Paranjpe, Pramod A (1978) Application of turbopack in solar energy systems. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Santhanam, A (1971) Temperature compensation of differential transformers. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Senthil Kumaran, R and Swamy, KMM and Suraj, CS Experimental investigations on semi-cryo rocket engine turbo pump turbine profiles part-I nozzle profile. Technical Report. National Aerospace Laboratories, Bangalore.

Shantha Kumar, N and Rao , P Narayana and Girija, G New Fuel Gauging Technique for LCA: Modeling with ANSA Data. Project Report. CSIR-NAL.

Shembharkar, TR and Pai, BR (1989) Computation of flow field in an Air intake duct of LCA. Project Report. National Aerospace Laboratories, Bangalore.

Shembharkar, TR and Pai, BR (1985) Prediction of film cooling wite a liquid coolant. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Shobhavathy, MT and Prathapanayaka, R and Jayaraman, M and Dilip Kumar, B and Satishkumar, S and Samiullah, TH and Rajagopal, RS and Janaki, Rami Reddy Development of a High Pressure Ratio Axial Fan Stage with Non-metallic Rotor Blads. Project Report. NAL, Bangalore.

Sivapragasam, M and Ramamurthy, S (2009) Inlet Flow Distortion Effects in Aircraft Gas Turbine Engine Compression Systems. Technical Report. NAL, NAL Bangalore.

Sivasankaram, K (1993) Advanced ceramics - application prospects in engines. Project Report. National Aerospace Laboratories, Bangalore.

Sivasankaram, K (1993) Development of catalytic igniter for GTX engine (Consolidated progress report). Project Report. National Aerospace Laboratories, Bangalore.

Sivasankaram, K (1987) Lasers and their selection for Anemometry. Project Report. National Aerospace Laboratories, Bangalore.

Sivasankaram, K (1987) Photodetectors for "Laser Anemometry". Project Report. National Aerospace Laboratories, Bangalore.

Sivasankaram, K and Sridhara, K (1974) Some experimental studies on aerodynamic and bluffbody flameholders. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sreenivasan, NR (1972) Shakedown and cyclic plasticity analysis of gas turbine rotors. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sreenivasan, NR and Antony, Michael and Jayaraman, M (1986) Dynamic Stability and Failure Analysis of a Cooling Tower Fan Drive System. Project Report. National Aerospace Laboratories, Bangalore.

Sreenivasan, NR and Thunga, KS and Rameshaiah, MS (1972) Design of transonic compressor research rig components. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sridhara, K and Chidananda, MS and Isaac, JJ (1977) Study of afterburner flameholder temperatures13;. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Srilatha, KR and Ramamoorthy, P (1990) Design of a Natural laminar Flow Airfoil for a Regional Transport Aircraft. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Srilatha, KR and Ramamoorthy, P (1989) Performance of NAL- MSNLF-136 airfoil with boundary layer tripped at 5 and 10 of the chord. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Srinathkumar, S and Rajanna, D (1970) Differntal transformers. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Srinivasan, KE and Brahma, KK (1993) User Interface for Estimation of Static Properties from Stress13; Vs Strain Data. Technical Report. National Aerospace Laboratories, Bangalore, India.

Sundaramurthy, H (1972) Dynamic stability testing in wind tunnels. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Swaminadham, M (1977) Laser holography system. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Swaminadham, M and Michael, Antony (1979) A note on frequencies of a beam with a heavy tip mass. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Swaminadham, M and Rajanna, K (1980) White light holographic interferometry. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Thennavarajan, S and Janaki, Rami Reddy and Nitesh, Kumar and Krishnoji Rao, KS and Loganathan, KS and Jagannatha Rao, B and Ramamurthy, S (2009) Performance of a Jet Pump used to Test the Heat Exchanger of TEJAS Aircraft. Project Report. NAL, NAL Bangalore.

Varute, PT and Samraj, AC (1974) Development of pressure regulating valve for cascade tunnel. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Vasudevachar, C and Ramachar, D and Ramamurthy, S (1996) CAD Drawings of Clocter Compressor. Project Report. NAL, NAL Bangalore. (Submitted)

Venkatesh, S and Chidananda, MS (1989) Calibratin of Jaguar Aircraft structure retering rig. Project Report. National Aerospace Laboratories, Bangalore.

Venkatesh, S and Chidananda, MS (1991) Calibration of Fuel Rotameters (Piston Engine)-HAL-1990. Project Report. National Aerospace Laboratories, Bangalore.

Venkatesh, S and Chidananda, MS (1991) Calibration of Fuel flow meter situated at Prototype Equipment HAL, Bangalore. Project Report. National Aerospace Laboratories, Bangalore.

Venkatesh, S and Chidananda, MS (1990) Calibration of Jaguar Aircraft Fuel Metering Rig , 1990. Project Report. National Aerospace Laboratories, Bangalore.

Venkatesh, S and Chidananda, MS (1988) Calibration of Jaguar Aircraft Metering RIG. Project Report. National Aerospace Laboratories, Bangalore.

Venkatesh, S and Chidananda, MS (1989) Calibration of Piston engine fuel rotameters- HAL-89. Project Report. National Aerospace Laboratories, Bangalore.

Venkatesh, S and Chidananda, MS (1992) Calibration of fuel totalizer of fuel accessories dept. HAL. Project Report. National Aerospace Laboratories, Bangalore.

Venkatesh, S and Chidananda, MS (1992) Calibration of piston engine fuel rotameters HAL-92. Project Report. National Aerospace Laboratories, Bangalore.

Venkatesh, S and Jagannatha Rao, B and Chidananda, MS Calibration of Fuel Rotameters (HAL NASIK) Division 1991. Project Report. National Aerospace Laboratories, Bangalore.

Venkatesh, S and Krishna Kumar, VS and Chidananda, MS (1987) Calibration of Piston Engine Fuel Flow Rotameters. Project Report. National Aerospace Laboratories, Bangalore.

Venkatesh, S and Krishna Kumar, VS and Chidananda, MS (1988) Calibration of Piston Engine fuel Rotameters. Project Report. National Aerospace Laboratories, Bangalore.

Venkatesh, S and Krishna Kumar, VS and Chidananda, MS (1993) Calibration of fuel bulkmeter of Jaguar aircraft - 1993. Project Report. National Aerospace Laboratories, Bangalore.

Venkatesh, S and Krishna Kumar, VS and Chidananda, MS (1994) Calibration of fuel rotameters (piston engine) -HAL-1994. Project Report. National Aerospace Laboratories, Bangalore.

Venkatesh, S and Krishna Kumar, VS and Chidananda, MS (1993) Calibration of piston engine fuel Rotameters HAL-93. Project Report. National Aerospace Laboratories, Bangalore.

Viswanathan, R and Raghu, M (1986) Vibration measurements made in LSI laboratory Indian Telephone Industries. Project Report. National Aerospace Laboratories, Bangalore.

Viswanathan, R and Ramamurthy, MR (1972) A multipoint excitation system ground resonance testing of aircraft. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Viswanathan, R and Rao, KS (1970) 240 watt power amplifier. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Viswanathan, R and Rao, KS (1972) Design of a 1 KG electrodynamic shaker. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Viswanathan, R and Rao, KS (1971) Electromagnetic velocity pick up. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Viswanathan, R and Rao, KS (1971) Electromagnetic velocity pick up. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Video

Rajashekar, C and Raghukumar, HS and Janaki Rami Reddy, M and Isaac, JJ (2012) High Speed Shadowgraph Visualization of the Unsteady Flow Phenomena in a Valveless Pulsejet Engine -video. [Video]

Rajashekar, C and Raghukumar, HS and Janaki Rami Reddy , M and Bhaskaran, M and Isaac, JJ (2013) High-Speed Shadowgraph Visualisation of Flow in a Miniature Hydrogen-Fuelled Valveless Pulsejet Engine. [Video]

Rajashekar, C and Raghukumar, HS and Janaki Rami Reddy, M and Bhaskaran, M and Isaac, JJ (2013) High-Speed Shadowgraph Visualisation of Flow in a Miniature Hydrogen-Fuelled Valveless Pulsejet Engine. [Video]

Rajashekar, C and Venkat Iyengar, S and Raghukumar, HS and Roshan , Antony and Suraj, CS and Hemanth , Sharma (2011) Feasibility Studies on the power plant - MAV. [Video]

This list was generated on Wed Nov 26 01:04:48 2014 IST.