Items where Subject is "AERONAUTICS > Aeronautics (General)"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators Name | Item Type
Number of items at this level: 1225.

Book / Book Chapter

Balasubramaniam, R and Somashekar, BR (1994) Ground vibration studies of aerospace structures- NAL's contribution. In: Aerodynamic Testing and Structural Dynamics. Interline Publishing Private Limited, Bangalore, pp. 1-15.

Bhaumik, SK and Divakar, C and Rangaraj, J and Ushadevi, S and Singh, AK (1997) Synthesis and sintering of ceramic materials under pressure. In: Advances in High Pressure Science and Technology. Universities Press, Hyderabad, pp. 215-220.

Mohan, M and Parameshwara, MA and Singh, AK (1992) Measurement of the pressure dependence of the electrical resistance of nickel at temperatures up to 750 K. In: Recent Trends in High Pressure Research. Oxford, IBH, New Delhi, pp. 462-464.

Ramasesha, SK and Divakar, C and Gopalakrishnan, PS and Singh, AK (1992) Thermoelectric power of bismuth up to up 9 GPa. In: Recent Trends in High Pressure Research. Oxford IBH, New Delhi, India, pp. 456-458.

Singh, AK (1991) The peak position and the profile near the peak of an X-ray diffraction line under pressure gradient. In: Recent Trends in High Pressure Research. Oxford IBH, New Delhi, pp. 786-789. ISBN 9788120406988

Singh, AK and Ramaseshan, S (1963) An integrating weissenberg camera for low and high temperature studies. In: Crystallography and Crystal Perfection. Academic Press, London, pp. 309-315.

Conference or Workshop Item

Ahmed, Sajeer (1998) Experimental investigation on cone cylinder bodies of elliptical and circular cross sections at M = 2.0 AIAA Paper 98-2727. In: 16th AIAA Applied Aerodynamics Conference, June 15-18, 1998, Albuquerque, NM.

Ananda, CM (2007) Avionics for general aviation light transport aircraft: An insight into the avionics architecture and integration. In: 4th Annual AIAA Southern California Aerospace Systems and Technology Conference, 5 May 2007, California, USA.

Ananda, CM (2007) Avionics testing and integration for general aviation light transport aircraft: Practical functional and operational integration activities for LTA. In: 4th Annual AIAA Southern California Aerospace Systems and Technology Conference, 5 May 2007, California, USA.

Ananda, CM (2007) General aviation light transport aircraft avionics: Integration and system tests. In: 26th Digital Avionics Systems Conference (DASC), 21-25 Oct 2007, Dallas, Texas, USA.

Ananda, CM (2007) Improved availability using re-configuration algorithm in a flight critical system. In: 26th Digital Avionics Systems Conference (DASC), 21-25 Oct 2007, Dallas, Texas, USA.

Ananda, CM (2010) Integrated model driven design development (IMDD) for software and system engineering. In: 29th IEEE & AIAA Digital Avionics Systems Conference, 03-07 Oct 2010, Salt Lake City, UT.

Ananda, CM (2008) Re-configurable flight safety system for trends and statistics analysis of avionics systems and components - An embedded perspective of an efficient tool for flight safety in aviation industry. In: International Conference for Avionics, ICAS, 22-23 Feb 2008, Hyderabad, India.

Ananda, CM (2007) Re-configuration avionics architecture using re-configuration algorithm for flight critical applications. In: 4th Annual Southern California Aerospace Systems and Technology Conference, 5 May 2007, California, USA.

Ananda, CM (2008) Validation of control parameters for a re-configurable algorithm in a flight critical avionics application. In: Proceedings of the International Conference on Aerospace Science and Technology, 26-28 Jun 2008, Bangalore, India.

Ananda, CM and Kumar, Rakesh (2008) Configurable flight data analysis for trends and statistics analysis of avionics systems - An embedded perspective of an efficient flight data analysis. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-101), 26-28 Jun 2008, Bangalore, India.

Ananda, CM and Kumar, Rakesh (2008) Validation of control parameters for a re-configurable algorithm used in flight critical avionics application. In: International Conference for Avionics, ICAS, 22-23 Feb 2008, Hyderabad, India.

Ananda, CM and Venkatanarayana, KG (2008) Avionics for general aviation light transport aircraft: An insight into the SARAS avionics architecture and integration. In: International Conference for Avionics, ICAS, 22-23 Feb 2008, Hyderabad, India.

Anandan, C and William Grips, VK and Ezhilselvi, V and Rajam, KS (2006) Electrochemical studies of stainless steel implanted with nitrogen and oxygen by plasma immersion ion implantation. In: National Symposium on Electrochemical Science and Technology (NSEST-2006), 21-22 Jul 2006, Bangalore, India.

Aravind, KG and Giridhar, BG and Jay Raj Kumar , Singh Sodhi and Suresh, J and Mahendra , KV and Ramamurthy, S (1999) Computer Aided Design of Centrifugal Pump. In: National Conference of Pumps, 1999. (Submitted)

Arunkumar, V and Rajaneesh, MK and Radhakrishna, M and Jana, S (2004) Bolted Joint Stiffness Studies – An Experimental Approach. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, IIT Kanpur. (Submitted)

Arunkumar, V and Shashidhar, UG and Jana, S and Munirathnam, V and Mahesh, Mesta (2004) Feasibility Studies on Power Take Off Composite Shaft. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, IIT Kanpur. (Submitted)

Arunkumar, V and Swamy, RP (2000) Contoured land Squeeze film dampers- A probable candidate for obtaining better characteristics in gas turbine engines. In: NCABE – 2000, Hyderabad. (Submitted)

Ashutosh, Katari and Ramamurthy, S and Murugesan, K (1998) Design & Off-Design Performance Analysis of and Aero Engine. In: 4th National Conference on Air Breathing Engines and Aerospace Propulsion, December 1998, Bangalore. (Submitted)

Balakrishna, S and Ganesh, VS and Padma, Madhuranath and Bonde, DH and Handoo, KL (1989) Design,construction and evalution of ISRO-NAL acoustic test facility. In: 39th IAF, International Aeronautical Congress, 8-15 Oct 1988, Bangalore, India.

Balamurugan, R and Moorthy, Emayavaramba MV and Sundaram, Ramesh (2008) Viman Vikas: On-Line quality assurance software for manufacturing of Aircraft Composites Structures. In: Proceedings of the ISAMPE National Conference on Composites INCCOM-7, 4-5 Dec 2008, Bangalore, India.

Barai, Amalesh and Somanath, S and Pradeep, S (1998) Selective vibration control in a generic launch vehicle AIAA Paper 98-4930. In: AIAA/USAF/NASA/ISSMO Symposium on Multidisciplinary Analysis and Optimization, Sept. 2-4, 1998, St. Louis, MO.

Barshilia, Harish C (2006) Surface engineering for materials - Nanolayered multilayer coatings and nano-composite coating. In: NAL-IISc-CRIAQ (quebec) Workshop on Aerospace Research and Development, 22 Nov 2006, Bangalore, India.

Basappa, K (2004) Evaluation of Recursive Methods for Aircraft Parameter Estimation. In: AIAA Atmospheric Flight Mechanics Conference and Exhibit, 16-19 August 2004,, Providence, Rhode Island.

Basu, Bharathibai J (2007) Development of pressure sensitive paint in NAL. In: Supersonic Tunnel Association International (STAI-108) , 9 Oct 2007, Eagleton Resorts, Bidadi.

Basu, Bharathibai J and Vasantharajan, N (2007) Sol-gel based optical sensor materials for measurement of surface pressure and temperature. In: 10th International Conference on Adanced Materials, IUMRS-ICAM 2007, 8-13 Oct 2007, Bangalore, India.

Bhaumik, SK (2006) Fatigue failures in aeroengine Components. In: Proceedings of the 14th National Seminar on Aerospace Structures: Fatigue, Fracture and Ageing Structures, 30-31 Jan 2006, Nagpur, India.

Bhaumik, SK and Reddy, AV (2010) Fatigue failure of aircraft components. In: International Winter School on Advances in Aeronautical Materials and Technologies, 15-19, Dec 2010, Hyderabad, India.

Bhoi, SR and Suryanarayana, GK (2008) Prediction of total pressure characteristics in the settling chamber of a supersonic blowdown wind tunnel. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-105), 26-28 Jun 2008, Bangalore, India.

Brahma, KK and Dattaguru, B and Sunder, R (1987) Effect of temperature exposure on fatigue crack propagation 13; 13;. In: Virginia Univ , Fatigue, Volume 2, Ministry of Defence, nill, United States.

Chakravarthi, AK and Ramamurthy, S and Selvaraj, C (2006) CFD Simulation of Micro Gas Turbine Recuperator. In: Proceedings of National Conference on CFD,Applications in Power and Industry Sector, November 17-18, 2006, BHEL,Hyderabad. (Submitted)

Chakravarthy, B (2002) Comparison of FAR 25 checked maneuver requirements with other regulations like JAR 25 AIAA Paper 2002-4791. In: AIAA Modeling and Simulation Technologies Conference and Exhibit, 5-8 August 2002, Monterey, California.

Chakravarthy, SB (2008) Drag estimation and comparison with flight test data for SARAS. In: Workshop on drag prediction of air vehicles, 6 Feb 2008, Bangalore, India.

Chandra, N and Ananda, CM and Shivaprasad, MV and Rajan, SR and Krishna, Saraswathi and Shivaprasad, S and Venkatasubramanyam, DV and Viswanath, S (2008) In-flight vibration and temperature measurements on a typical aircraft for test tailoring. In: International Conference on Aerospace Science and Technology (INCAST 2008-094), 26-28 Jun 2008, Bangalore, India.

Chattopadhyay, Lalitha (2006) Bending stress intensity factors of an elastic plate containing two equal collinear cracks. In: International Seminar on Fatigue, Fracture and Durability amp; Symposium on Residual Life Assessment amp; Extension of Aging Structures, 26-28 Jun 2006, Bangalore, India.

Chattopadhyay, Lalitha and Murthy, Sridhara S and Mahesh, H (2008) Analytical and finite element modelling of buckling and post-buckling of delaminated opthotropic plates. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-079), 26-28 Jun 2008, Bangalore, India.

Chetty, Shyam (2002) Design, development and flight testing of control laws for the Indian Light Combat Aircraft AIAA Paper 2002-4649. In: AIAA Guidance, Navigation, and Control Conference and Exhibit, Aug. 5-8, 2002, Monterey, CA.

Chetty, Shyam and Henschel, F and Hanke, D (1987) ATTAS in-flight simulation and model-following control (Advanced Technologies Testing Aircraft System)). In: National Seminar on Flight Research, Test and Development, May-Aug 1987, Bangalore, India.

Christhilf, Davidm and Waszak, Martinr and Adams, Williamm and Srinathkumar, S and Mukhopadhyay, Vivek (1991) Design and test of three active flutter suppression controllers. In: 4th NASA Workshop on Computational Control of Flexible Aerospace Systems, 14-18 1991, United States.

Claretti, R and Hossain, J and Harrington, JT and Bernstein, JA and Verma, SB and Kapat, JS (2013) Heat transfer study on multiple walls of an impingement channel with variable jet heights - HT2013-17054. In: Proceedings of the ASME 2013 Summer Heat Transfer Conference HT2013, 14-19 Jul 2013, Minneapolis, MN, USA.

Dash, PK (2006) Can We Hope to Make Today's Concern about Ageing Aircraft - a Thing of the Past? In: Proceedings of 14th National Seminar on Aerospace Structures: Fatigue, Fracture and Ageing Structures, 30-31 Jan 2006, Nagpur, India.

Dave Ashok, D and Muralidhara, HS and Ramamurthy, S (2006) Development of Tangential Injection Combustor for Micro Gas Turbine. In: Proceedings of National Conference on CFD,Applications in Power and Industry Sector, November 17-18, 2006, BHEL,Hyderabad. (Submitted)

Desai, SS and Rangarajan, R and Singh, JP and Ravichandran, KS (1987) Full-potential flow computations using cartesian grids 13; 13;. In: 8th Conference on Computational Fluid Dynamics, 9-11 June 1987, Honolulu, United States.

Dhanasekaran, G and Manjuprasad, M and Thirugnanam, GS (2006) Nonlinear seismic response prediction of a framed structure using artificial neural networks (ANN). In: National Conference on Technology for the Future (NCCTF-06), 21-22 Apr 2006, Erode, Tamil Nadu, India.

Divakar, C and Adiga, BS and Singh, AK (1992) Computer aided technique for the determination of ultrasonic transit time. In: Recent Trends in High Pressure Research.

Divya , S and Singh, DB and Lakshmikanthiah, Y and Rao, K Prasad (2011) Development of 8-Channel wireless data acquisition system for wind tunnel application. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.

Durai, Thulasi D and Venkatesh, S and Varughese, Byji and Ramanaiah, B and Dayananda, GN (2008) Concepts for truss based aerofoil construction. In: ISAMPE National Conference on Composites : INCCOM-7, 4-5 Dec 2008, Bangalore, India.

Dutta, PK and Dutta, Vimala and Sharanappa, - (2007) Rans computation of flow past wind turbine blades. In: 7th Asian Computational Fluid Dynamics Conference (ACFD7), 26-30 Nov 2007, Bangalore, India.

Dutta, Soma and Raja, S and Shashikala, Rajappa (2005) Thermo-Mechanical response of an electrically driven micro-actuator. In: International Conference on MEMS and Semiconductor Nanotechnology , 2005, IIT, Kharagpur, India.

Dutta, Vimala and Dutta, PK and Sajjan, SV (2008) RANS Computations for flow through a variable mach number flexible nozzle at a mach 4. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-056), 26-28 Jun 2008, Bangalore, India.

Dutta, Vimala and Dutta, PK and Sajjan, Sharanappa V (2008) RANS computations for flow through a variable mach number flexible nozzle at mach 4. In: Proceedings of the International Conference on Aerospace Science and Technology, 26-28 Jun 2008, Bangalore, India.

Dwarakanathan, D and Raja, S and Rajappa, S and Balakrishnan, B (2008) Evolution based statistical optimization technique to design the smart structural system for large aerospace structures. In: Proceedings of the International Conference on Aerospace Science and Technology, 26-28 Jun 2008, Bangalore, India.

Elayaraja, S and Kumar, Vineet (2008) SARAS VT-X light transport aircraft - flight test experience. In: International Flight Test Seminar, 14-15 Feb 2008, Bangalore, India.

Girija, G and Basappa, K and Raol, JR and Madhuranath, P (2000) Evaluation of methods for determination of drag polars of unstable/augmented aircraft AIAA Paper 2000-0501. In: 38th Aerospace Sciences Meeting amp; Exhibit, 1 O-1 3 January 2000, Reno, NV.

Girija, G and Raol, JR (2000) Application of information filter for sensor data fusion AIAA Paper 2000-0894. In: 38th Aerospace Sciences Meeting amp; Exhibit, 10-13 Jan 2000, Reno, NV.

Girija, G and Raol, JR (2001) Comparison of methods for association and fusion of multi sensor data for tracking applications. In: AIAA Guidance, Navigation, and Control Conference and Exhibit, 6-9 Aug 2001, Montreal, Canada.

Girija, G and Zorn, Christopher and Koch, Andreas (2005) Multisensor Data Fusion for Sensor Failure Detection and Health Monitoring 2005-5843. In: AIAA Guidance, Navigation, and Control Conference and Exhibit, 15-18 August 2005, San Francisco, California.

Gupta, Nitesh and Sundaram, Ramesh (2007) Optical flow sensors for verity process. In: 2nd ISSS National Conference on MEMS, Microsensors, Smart Materials, Structures and Systems, Nov 2007, Pilani, India.

Hanagud, S and Smith, CV and Chattopdhayay, A (1985) Optimal design of a vibrating beam with coupled bending and torsion AIAA 85-643. In: AIAA 26th structures, structure Dynamics and Materials Conference.

Hossain, J and Tran, LV and Carpenter, C and Wang, W and Verma, SB and Kapar, JS (2013) Numerical study of enhancement of regenerative cooling using ribs - AIAA 2013-3996. In: 49th AIAA/ASME/SAE/ASEE Joint Propulsion Conference, 14-17 Jul 2013, San Jose, CA, USA.

Jain, Praveen and Manjunatha, CM and Srinivasa, U (2007) Strain calculations. In: GE conference on DREAMS 07, Mar 2007.

Jana, S and Arunkumar, V (2003) Experimental Studies Related to the use of High Temperature Elastomers as External Damper for Rotating Systems. In: Proceedings of National Symposium on Rotor Dynamics, IIT Guwahati, India. (Submitted)

Jana, S and Arunkumar, V (2005) Studies on the Effect of Shaft Bow for a Multi Mass Flexible Rotor Model. In: Proceedings of the National Conference on Industrial Problems on Machines and Mechanisms, IIT Kharagpur. (Submitted)

Jana, S and Arunkumar, V and Ananda, M (2004) 5-Axes Levitation of a Rotor Towards Indigenisation of the Magnetic Bearing Technology. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, 05-07 November 2004, IIT Kanpur. (Submitted)

Jayanthi, J and Nanda, Manju and Nayak, MR (2008) Embedded software development for aerospace trends, challenges, lessons. In: International Conference for Avionics, ICAS, 22-23 Feb 2008, Hyderabad, India.

Jayanthi, J and Nanda, Manju and Nayak, MR (2008) Indigenous software development for civil aircraft system. In: Proceedings of the International Conference on Aerospace Science and Technology, 26-28 Jun 2008, Bangalore, India.

Jayaprakash, C and Sathiyamoorthy, K and Khan, AA and Venu, G and Venkat Iyengar, S and Srinivas, J and Pratheesh Kumar, P and Manjunath, P (2013) Development of Mach 3.6 water cooled facility nozzle. In: National Propulsion Conference, Feb 2013 , Chennai.

Jigar, Sura and Ramamurthy, S and Niyati, Shah (2010) Digital Simulation of Engine Operating Characteristics. In: 3rd International Conference on Advances in Mechanical Engineering (ICAME 2010), 4-6th January 2010, SVNIT,Surat.

Kamalakannan, GM and Subba Rao, M and Chandra, K and Abhilash, P (2008) Advanced hot bonding system for repair of Aerospace Structures. In: Proceedings of the INCCOM-7, Dec. 4-5, 2008, Bangalore, India.

Kamaleshiah, MS and Venkatrayulu, N and Ramamurthy, S (1988) An Improved Method of Centrifugal,Compressor Performance Prediction. In: 16th National Conference on FMFP, 1988.

Kamaraj, V (1997) Suppression of shock wave oscillations on a blunt cone-cylinder13; AIAA Paper 97-0299. In: AIAA, Aerospace Sciences Meeting amp; Exhibit, Jan. 6-9, 1997, 35th, Reno, NV.

Kamath, GM and Khatkhate, A and Subba Rao, M (2007) Sensor failure detection using a combined artificial neural network and finite element analysis approach. In: 2nd ISSS National Conference on MEMS, Microsensors, Smart Materials, Structures and Systems, Nov 2007, Pilani, India.

Kamath, GM and Ramanaiah, B and Verma, KK and Subba Rao, M (2007) Static environmental testing of a co-cured aircraft wing test box. In: Proceedings of the National Seminar on Aerospace Structures, Sep 2007, Coimbatore, Tamil Nadu, India.

Kanagarajan, V and Arokkiaswamy, A (1986) Some studies on induced rolling moment of a missile type configuration 13; 13;. In: 2nd National Conference on Aerodynamics, 19-20 Dec 1986, Bangalore, India.

Kashyap, SK and Girija, G and Raol, JR (2003) Evaluation of Converted Measurement and Modified Extended Kalman Filters for Target Tracking 2003-5450. In: AIAA Guidance, Navigation, and Control Conference and Exhibit, 11-14 August 2003, Austin, Texas.

Khan, AA and Shembharkar, TR (2008) Numerical Simulation of Supersonic Combustion in a Slant Cavity. In: 10th Annual CFD Symposium, 11-12 Aug 2008, NAL, Bangalore, India.

Khan, AA and Shembharkar, TR (2008) Viscous flow analysis in a convergent-divergent nozzle. In: Proceedings of the International Conference on Aerospace Science and Technology, 26-28 Jun 2008, Bangalore, India.

Khan, AA and Venkat Iyengar, S (2009) Numerical simulation of supersonic combustion of hydrogen in a vitiated air stream. In: 11th AeSI Annual CFD Symposium, 11-12 Aug 2009, Inidian Institute of Science, Bangalore, India.

Kodanda, B (2010) Sustainability of feeder and short-haul air transportation systems in India: Emerging issues and future perspectives. In: 12th Triennial World Conference on Transport Research (WCTR 2010), 11-15 Jul 2010, Lisbon, Portugal.

Krishnamurthy, M and Venugopal, S (1991) A correlation study of the wing-body interference factor for high angles of attack. In: 42nd Aeronautical Society of India, Annual General Meeting, 21-22 Dec 1990, Calcutta, India.

Krishnamurthy, SJ and Srilatha, KR and Kishore Kumar, (2006) Use of CFD methods for aerodynamic analysis of wind turbine blades. In: Proceedings of National Conference on CFD Applications in Power and Industry Sectors, 17-18 Nov 2006, Hyderabad, India.

Kulkarni, DS and Raghavendra, B and Rajani, BN and Majumdar, S (2008) Performance analysis of eddy-viscosity based turbulence models for attached and separated flows. In: Proceedings of the 12th Asian Congress of Fluid Mechanics, 18-21 Aug 2008, Daejeon, Korea.

Kumar, K and Nair, Manoj T (2007) Numerical study of shock -boundary layer interaction in hypersonic flow. In: Proceedings of the High Speed Transatmospheric Air and Space Transportation, 22-23 Jun 2007, Hyderabad, India.

Kumar, R and Viswanath, P (2004) Nose Bluntness for Side Force Control on Circular Cones at High Incidence 2004-37. In: 42nd AIAA Aerospace Sciences Meeting and Exhibit, 5-8 January 2004, Reno, Nevada.

Kumar, R and Viswanath, P. R (2001) Mean and fluctuating pressure field in boat-tail separated flows at transonic speeds AIAA Paper 2001-058213; 13;. In: 39th AIAA Aerospace Sciences Meeting amp; Exhibit, 8-11 January 2001, Reno, NV.

Kumar, Varun and Prabhu, BS and Paranjpe, PA (1987) A study on the effect of non-dimensional system parameters on squeeze film damper performance using experimental data. In: 8th, Cincinnati, International Symposium on Air Breathing Engines, 14-19 June 1987, OH, United States.

Kumar, Vineet and Kamaleshiah, MS and Panda, GK and Mukund, R and Karthikeyan, N (2007) Wind tunnel measurements on powered model of SARAS aircraft to assess the effect of airframe-propeller flow interaction on propeller thrust. In: 3rd Symposium on Applied Aerodynamics and design of aerospace vehicle (SAROD-2007), 22-23 Nov 2007, Thiruvananthapuram, Kerala, India.

Kumar, Vineet and Panda, GK and Rajan, SR and Khatri, AK and Sahoo, S (2008) Few aspects of flight data acquisition and analysis for twin turboprop Saras aircraft. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-098), 26-28 Jun 2008, Bangalore, India.

Kumar , R and Venkatakrishnan, L and Wiley, Alex and Alvi, Farukh (2010) Role of coherent structures in supersonic impinging jet noise and its control. In: 16th AIAA/CEAS Aeroacoustics Conference, 7-9 Jun 2010, Stockholm, Sweden.

Lakshmi, P and Patel, Vijay V and Deodhare, Girish S and Chetty, Shyam (2008) Compensation on deployment of airbrakes and lessons learned from LCA flights. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-083), 26-28 Jun 2008, Bangalore, India.

Lakshminarasimha, R and Arunkumar, V and Jana, S and Bhaumik, SK and Ramaiah, KV (2004) Preliminary Studies on the Thermo-Mechanical Characteristics of Indigenously developed Shape Memory Alloy wires. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, IIT Kanpur. (Submitted)

Lakshminarayanan, R and Abdul, Nabi and Ramamurthy, S (2006) Development of a Recuperator for 10kW micro gas turbine. In: NCABE, December 2006.

Lathasree, P and Sheethal, RM (2008) Estimation of aircraft fuel consumption for a mission profile neural networks. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-115), 26-28 Jun 2008, Bangalore, India.

Lees, AW and Jana, S and Inman, DJ and Cartmell, MP (2007) Control of bearing stiffness using shape memory. In: IMAC XXV, 19-22 Feb 2007, Oriando, Florida, USA.

Majeed, M and Kar, IN (2011) Identification of aerodynamic derivatives of a flexible aircraft using output error method. In: International Conference on Mechanical and Aerospace Engineering (CMAE 2011), 21-23 Mar 2011, New Delhi, India.

Manas, Pradhan and Ramamurthy, S (2004) Stability and Control Analysis of Centrifugal Compressor. In: 7th National Conference on Air Breathing Engines and Aerospace Propulsion, November 2004, IIT,Kanpur. (Submitted)

Manisankar, C and Sajeer, Ahmed and Thiagarajan, V (2010) Investigation of starting process of a movable intake configuration at high supersonic speeds. In: Proceedings of the 13th Asian Congress of Fluid Mechanics, 17-21 Dec 2010, Dhaka, Bangladesh.

Manjunatha, C and Parida, B (2003) A Model for Predicting the Overload Effects on Fatigue Crack Growth Behavior AIAA-2003-1523. In: 44th AIAA/ASME/ASCE/AHS Structures, Structural Dynamics, and Materials Confere, 7-10 April 2003, Norfolk, Virginia.

Manjunatha, CM (2007) Damage tolerance evaluation of aircraft materials. In: National Symposium on Fatigue, Fracture and Integrity Assessment, 6-7 Mar 2007, Jamshedpur, India.

Manjunatha, CM and Chandra, Anil AR and Ranganath, VR (2006) Fatigue crack growth prediction under Falstaff load sequence by K*-RMS approach. In: International Seminar on Fatigue, Fracture and Durability, 26-28 Jun 2006, IISc., Bangalore.

Manjunatha, CM and Chandra, Anil AR and Ranganath, VR (2006) Modification of falstaff load sequence to accelerate fatigue tests. In: Proceedings of the National Conference on Mechanical Engineering (NATCON.ME-2006), 26-27 May 2006, Tumkur, India.

Manjunatha, CM and Chandra, Anil AR and Ranganath, VR (2006) New procedure for crack growth prediction under spectrum loads. In: ATM 2006, 15-16 Nov 2006, Jamshedpur, India.

Manjunatha, CM and Ranganath, VR (2006) Effect of Airframe Materials on Spectrum Modification for Full Scale Fatigue Testing sf an Ageing Aircraft. In: Proceedings of the 14th National Seminar on Aerospace Structures: Fatigue, Fracture and Ageing Structures, 30-31 Jan 2006, Nagpur, India.

Manjunatha, CM and Ranganath, VR (2007) Prediction of Optimum Spectrum for Full Scale Fatigue Test. In: 15th National Seminar on Aerospace Structures, 15-16, Oct 2007, Coimbatore, Tamil Nadu, India.

Manjunatha, CM and Ranganath, VR (2006) Spectrum Modification for Full Scale Fatigue Testing of an Ageing Aircraft. In: Proceedings of 14th National Seminar on Aerospace Structures: Fatigue, Fracture and Ageing Structures, 30-31 Jan 2006, Nagpur, India.

Manjunatha, CM and Ranganath, VR and Sujatha, S and Sureshkumar, M and Venkataswamy, M (2006) Estimation of service load sequence from fatigue fracture surface analysis (Paper No. DD-5). In: National Conference on Failure Analysis, NCFA-2006, 22-23 Dec 2006, Hyderabad, India.

Manjuprasad, M (2008) Aeroelastic random gust response analysis of aircraft structures in time domain using simulations. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-032), 26-28 Jun 2008, Bangalore, India.

Manjuprasad, M and Manohar, CS (2006) Stochastic finite element forced vibration analysis with reliability based adaptive mesh refinements. In: International Congress on Computational Mechanics and Simulation (ICCMS-06), 8-10 Dec 2006, Guwahati, India.

Manjuprasad, M and Nandakumar, T and Lakshmanan, N (2006) Seismic vulnerability analysis of framed structures with base isolation devices using nonlinear pushover technique. In: 13th Symposium on Earthquake Engineering (13SEE-06), 18-20 Dec 2006, Roorkee, India.

Mao, H and Shu, J and Hemley, RJ and Singh, AK (1996) Rheology, strength and elasticity anisotropy of iron at high pressures. In: AUG meeting, 15-19 Dec 1996, San Francisco.

Mathur, AC and Somasekhar, BSM and Kumar, Mohan and Srikanth, L and Kumar, Rahul and Venkatsubramanium, D and Rao, RMVGK (2008) Development of a metalised carbon fiber reinforced plastic (CFRP) antenna reflector for satellite communication. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-042), 26-28 Jun 2008, Bangalore, India.

Mathur, NB and Yajnik, KS (1987) Underexpanded jet-free stream interactions on an axisymmetric afterbody configuration. In: 8th International Symposium on Air Breathing Engines, 14-19 June 1987, Ohio, United States.

Mukherjee, S and Prathap, Gangan (2006) The best-fit paradigm of fea; shadows of the exact, 2006. In: International Congress of Computational Mechanics and Simulation (ICCMS'06), 8-10 Dec 2006, Guwahati, India.

Mukherjee, Somenath and Manjuprasad, M and Sakravarthini, Deepa S and Avinash, R (2008) Finite element studies on supersonic panel flutter under high thermal environment with arbitrary flow direction. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-058), 26-28 Jun 2008, Bangalore, India.

Mukherjee, Somenath and Prathap, Gangan (2001) Analysis of shear locking in Timoshenko beam elements using the function space approach13; 13;. In: 2nd International Conference on Theoretical, Applied, Computational and Experimental Mechanics, 27-30 Dec 2001, Kharagpur, India.

Mukund, R and Karthikeyan, N (2008) Wind tunnel measurements on MAV planforms. In: Proceedings of the Indo-US Workshop on Micro Air Vehicles, 13-14 Nov 2008, Bangalore, India.

Mukund, R and Venkatakrishnan, L and Madhavan, KT (2008) Phase-locked PIV studies on an oscillating airfoil. In: Proceedings of the 12th Asian Congress of Fluid Mechanics, 18-21 Aug 2008, Daejeon, Korea.

Murthy, Sridhara S (2010) Design of Aircraft Structures - Structural Design of Carbon Fiber Composite Wing for the SARAS Civil Transport Aircraft. In: International Winter School on Advances in Aeronautical Materials and Technologies, 15-19, Dec 2010, Hyderabad, India.

Murthy, Sridhara S and Narayana, R (2006) Elasto-Plastic stress analysis of high stress region of a typical aircraft wing. In: Indo Russian Workshop on 'Problems in Non-linear Mechanics of Solids with large deformations', 22-24 Nov 2006, Delhi, India.

Muruganandam, M and Ramamurthy, S (2006) Air Bearing for High Speed Micro Gas Turbine. In: 5th National Seminar and Exhibition in Aerospace and Related Mechanisms, 2006, ISRO, Bangalore.

Murugesan, K and Ramamurthy, S (1995) Inception of Stall in a Centrifugal Impeller. In: 2nd National Conference on Air Breathing Engines, 1995, Melbourne, Australia. (Submitted)

Murugesan, K and Ramamurthy, S (1994) Spectral Fluctuations in Centrifugal Impeller Outlet Flows. In: 2nd National Conference on Air Breathing Engines and Aerospace Propulsion, December 1994, Trivandrum. (Submitted)

Murugesan, K and Ramamurthy, S and Sankaranarayanan, S (1992) An Airbreathing Engine for Aerospace Propulsion. In: 2nd National Conference on Air Breathing Engines and Aerospace Propulsion. (Submitted)

Muthukumar, A and Poddar, Kamal (2007) Effect of boundary layer mixing devices on hysteresis behaviour of flow past a pitching airfoil. In: 9th International Symposium on Fluid Control, Measurement, and Visualization (FLUCOME 2007), 16x2013;19 Sep 2007, Florida, USA.

Muthuvel, S and Ananda, CM and Venkatanarayana, KG (2008) Certification of airborne systems for civil aircraft applications: Indian scenario. In: International Conference for Avionics, ICAS, 22-23 Feb 2008, Hyderabad, India.

Nagendra, KS and Arunkumar, V and Jana, S and Mahesh, Mesta (2004) Application of Layer Damping Technique – An Experimental Study. In: Proceedings of 7th National Conference on Airbreathing Engines and Aerospace Propulsion, IIT Kanpur. (Submitted)

Nagendra, KS and Jana, S and Arunkumar, V (2006) Vibration Reduction of Flexible Beams using Shape Memory Alloys. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, DIAT, Pune. (Submitted)

Nagendra, KS and Jana, S and Arunkumar, V (2006) Vibration reduction of flexible beams using shape memory alloys. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, 12-14 Dec 2006, Pune, India.

Naidu, P and Girija, G and Raol, JR (2005) Target Tracking and Fusion Using Imaging Sensor and Ground Based Radar Data 2005-5842. In: AIAA Guidance, Navigation, and Control Conference and Exhibit, 15-18 August 2005, San Francisco, California.

Naidu, VPS and Garlin, Delphina (2011) Assessment of Color and Infra-Red Images using No-Reference Image Quality Metrics. In: Proceedings of NCATC 2011 .

Naidu, VPS and Girija, G and Raol, JR (2005) Target Location and Identity Estimation and Fusion using Disparate Sensor Data 2005-5841. In: AIAA Guidance, Navigation, and Control Conference and Exhibit, 15-18 August 2005, San Francisco, California.

Nair, M and Kumar, N and Saxena, S (2003) Reynolds Averaged Navier-Stokes Based Aerodynamic Analysis of Inlet for a Hypersonic Research Vehicle AIAA-2003-7067. In: 12th AIAA International Space Planes and Hypersonic Systems and Technologies, 15 - 19 December 2003, Norfolk, Virginia.

Nair, RU and Jha, RM (2008) Novel wire grid embedded C-sandwich radome structures for broadband airborne applications. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-138), 26-28 Jun 2008, Bangalore, India.

Nanda, Manju (2010) Modified and effective system-engineering life cycle for critical systems. In: 4th Annual IEEE Systems Conference, 2010 , 5-8 April 2010, San Diego, CA, USA.

Narasimhan, SV and Veena, S New delayless subband adaptive filter based on discrete cosine harmonic wavelet transform (CHWT). In: International Conference on Signal Processing and Communications (SPCOM 2010), 18-21 Jul, 2010, IISc., Bangalore.

Naresh, Kumar and Sengupta, TK and Dipankar, A and Kumaravel, G (2007) Receptivity analysis of hypersonic flow over a cone-cylinder configuration for stationary and time periodic vortical disturbances. In: 7th Asian Computational Fluid Dynamics Conference (ACFD7), 26-30 Nov 2007, Bangalore, India.

Naveen kumar, RO and Rinku, Abbani (2007) Structural optimization of stubwing structure of a typical light transport aircraft. In: 15th National Conference on Aerospace Structures, 15-16 Oct 2007, Coimbatore, Tamil Nadu, India.

Paligan, AA and Shubha, V and Ramesh, TG (2008) Centrifugal thermit process - An overview. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-087), 26-28 Jun 2008, Bangalore, India.

Panda, PK (2011) Development of PZT Materials, Fabrication and Characterization of Multi Layered Actuators for Aerospace Applications. In: Proceedings of the International Workshop on Functional Materials (IWFM-2011) (AIP Conf. Proc. 1461), 20-22 Dec 2011, Berhampur, Odisha, India.

Parameswaran, V and Jategaonkar, RV and Press, M (2002) Calibration of five-hole probe for flow angles from dynamic and tower fly-by maneuvers AIAA Paper 2002-4627. In: AIAA Atmospheric Flight Mechanics Conference and Exhibit, 5-8 August 2002, Monterey, California.

Pashilkar, A (1999) Computation of flight mechanics parameters using continuation techniques. AIAA Paper 99-4318. In: AIAA Atmospheric Flight Mechanics Conference and Exhibit, Aug. 9-11, 1999, Portland, OR.

Pashilkar, A. A (2002) Flight dynamic analysis of the flow incidence rate model AIAA Paper 2002-0098. In: 40th AIAA Aerospace Sciences Meeting amp; Exhibit, 14-17 January 2002, Reno, NV.

Pashilkar, A. A (2001) Flow incidence rate model for unsteady aerodynamics at high angles of attack AIAA Paper 2001-2469. In: 19th Applied Aerodynamics Conference, 11-14 June 2001, Anaheim, CA.

Pashilkar, A. A (2002) Global response surface model for unsteady surface pressures on delta wing aircraft AIAA Paper 2002-0711. In: 40th AIAA Aerospace Sciences Meeting amp; Exhibit, 14-17 January 2002, Reno, NV.

Pashilkar, A. A (2001) Surface pressure model for simple delta wings at high angles of attack AIAA Paper 2001-2415. In: 19th Applied Aerodynamics Conference, 11-14 June 2001, Anaheim, CA.

Pashilkar, A. A (1999) Unsteady aerodynamic modelling using multivariate orthogonal polynomials AIAA Paper 99-4014. In: AIAA Atmospheric Flight Mechanics Conference and Exhibit, Aug. 9-11, 1999, Portland, OR.

Patel, Vijay V and Deodhare, Girish and Chetty, Shyam (2002) Near real time stability margin estimation from piloted 3-2-1-1 inputs (AIAA 2002-5820). In: AIAA's Aircraft Technology, Integration, and Operations (ATIO) 2002 Technical, 1-3 Oct 2002, Los Angeles, California.

Pillai, KM and Mithran, AJS and William Grips, VK and Kumar, K Satish and Sinha, UK and Varadarajan, MN and Isaac, JJ and Murthy, YVS (2008) Design and development of an indigenous 55 HP wankel engine. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-109), 26-28 Jun 2008, Bangalore, India.

Pourassamy, A and Latha, S and Rajam, KS (2006) Development of a plasma nitriding process for the surface hardening of maraging steel application to LCA component. In: National Symposium on Electrochemical Science and Technology (NSEST-2006), 21-22 Jul 2006, Bangalore, India.

Prakash, Raghu V and Raju, KN and Kumar, Sathish K and Dattaguru, B and Ramamurthy, TS (1995) Analysis of fatigue crack growth in pin-loaded lug joints under in elastic deformations. In: 27th International Symposium on Fatigue and fracture mechanics, 26-29 June 1995, United States.

Prakash, Shashikala and Srinivas, HK and Saravanan, M and Nagendra, R (2006) Design of charge/power amplifiers for multi channel active vibration control of aircraft/aerospace structures. In: 19th International Congress and Exhibition on Condition Monitoring and Diagnostic Engineering Management, 12-15 Jun 2006, Lulea, Sweden.

Prakash, Shashikala and Venkatasubramanyam, DV and Krishnan, B and Nagendra, R (2008) Compact field programmable gate array (FPGA) controller for Aircraft / Aerospace structures. In: Proceedings of the International Conference on Aerospace Science and Technology, 26-28 Jun 2008, Bangalore, India.

Prathapanayaka, R and Shembharkar, TR (2008) Design and evaluation of a controlled diffusion aerofoil blade for a LP compressor stator. In: Proceedings of the International Conference on Aerospace Science and Technology, 26-28 Jun 2008, Bangalore, India.

Prathapanayaka, R and Venkatesh, TN and Shembharkar, TR (2006) Parallelization of a turbomachinery flow code on NAL's flosolver parallel computer. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion (NCABE-2006), 12-14 Dec 2006, Pune, India.

Raja, S and Dwarakanathan, D (2008) MAV structures and smart materials applications. In: Proceedings of the Indo-US Workshop on Micro Air Vehicles, 13-14 Nov 2008, Bangalore, India.

Rajagopal, P and Raja, S and Antony, Michael and Arunkumar, V (1995) Analytical and Experimental studies on cantilever type squeeze film Dampers. In: Fourth India MSC user’s conference. (Submitted)

Rajagopal, P and Vittala, NGV and Ramani, TS (1990) Aeroelastic analysis of a low aspect ratio wing 13; 13;. In: 40th Aeronautical Society of India, Annual General Meeting,, 19-20 Dec 1988, Madras, India.

Rajendran, R and Ramamurthy, S and Mohanan, P (2008) Aerodynamic Investigation of Flow in a Centrifugal Compressor. In: 12th Asian Congress in Fluid Mechanics , August 18-21 2008, Daejeon,Korea.

Rajendran, R and Ramamurthy, S and Mohanan, P (2006) Flow Studies in a Centrifugal Compressor Stage. In: 33rd International Conference on Fluid Mechanics and Fluid Power, December 2006, IIT,Mumbai. (Submitted)

Raju, KN (1979) Energy balance considerations during stable crack growth. In: Proceedings of the International Conference on Fracture Mechanics in Engineering Application, 26-30 Mar 1979, Bangalore, India.

Ramachandran, A and Ramamurthy, S and Rajeshwari Natarajan, S and Rajendran , R (2003) Development of High Speed Alternator for Gas Turbine Engine. In: 6th National Conference on Air Breathing Engines and Aerospace Propulsion, January 10-11th, IISC,Bangalore.

Ramamurthy, S and Arunkumar, V and Prabhu, BS Application of Aerodynamic foil bearing in high speed spindles of textile machinery –case study. In: International Conference on Tribology AUSTRIB 1994, Australia.

Ramamurthy, S and Bharat, Mhakwan (2008) Optimization of Recuparator Fin Geometry of Micro Gas Turbine. In: International conference for Aerospace Science and Technology, June 2008, Bangalore.

Ramamurthy, S and Makwana, B (2008) Optimisation of recuperater fin geometry for micro gas turbine. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-039), 26-28 Jun 2008, Bangalore, India.

Ramamurthy, S and Murugesan, K (1996) Analytic Approach for the Design of Centrifugal Impellers. In: 3rd National Conference on Air Breathing Engines and Aerospace Propulsion, December 1996, IIT,Chennai.

Ramamurthy, S and Murugesan, K (1993) Correlations for Flow Property Variation at Outlet of a Centrifugal Impeller. In: !X ISABE, September 1993, Tokyo,Japan. (Submitted)

Ramamurthy, S and Murugesan, K (1987) Turbomachinery Blade Profile Design. In: 3rd National Conference on Aerodynamics, 1987, IIT,Bombay. (Submitted)

Ramamurthy, S and Murugesan, K and Govardhan, M (1991) Characterisation of Rotating Stall in a Centrifugal Impeller. In: International Conference on Experimental Fluid Mechanics, June 17-21 1991, Beijing,China. (Submitted)

Ramamurthy, S and Murugesan, K and Prithviraj, D (1991) Flow Behaviour in Centrifugal Impellers. In: Tenth International Symposium on Air Breathing Engines, September 1-6, 1991, Nottingham,U.K.. (Submitted)

Ramamurthy, S and Murugesan, K and Prithviraj, D and Govardhan, M (1992) Slip Factor for Jet-Wake Flow in a Centrifugal Impeller. In: 1st National Conference on Air Breathing Engines and Aerospace Propulsion, December 1992. (Submitted)

Ramamurthy, S and Murugesan, K and Sankaranarayanan, S (1998) Design and Development of Distortion Screens for a Gas Turbine Engine Intake. In: 4th National Conference on Air Breathing Engines and Aerospace Propulsion, December 1998, Bangalore. (Submitted)

Ramamurthy, S and Rajendran, R and Dileep Kumar, RS (2008) Theoretical evaluation of flow through centrifugal compressor stage. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-001), 26-28 Jun 2008, Bangalore, India.

Ramamurthy, S and Rajendran, R and Dilip Kumar, RS (2008) Theoritical evaluation of flow through centrifugal compressor stage. In: International conference for Aerospace Science and Technology , June 2008, Bangalore.

Ramamurthy, S and Rajendran, R and Murugesan, K and Narayanan, SS (2000) Flow Behaviour Near the Leading Edge of the Vaned Diffuser. In: 5th National Conference on Air Breathing Engines and Aerospace Propulsion, Dec 2000, Bangalore.

Ramamurthy, S and Sankaranarayanan, S and Murugesan, K (1987) Aerodynamic Design of High Pressure Ratio Centrifugal Compressors. In: 15th National Conference on Fluid Mechanics and Fluid Power,REC, 1987, Srinagar. (Submitted)

Ramamurthy, S and Sankaranarayanan, S and Murugesan, K and Ramachar, D and Rajendran, R Development of High Pressure ratio Centrifugal Compressor Stage. In: 4th National Conference on Air Breathing Engines and Aerospace Propulsion, 1998 December, Bangalore. (Submitted)

Ramamurthy, S and Sriharsha, AM (2009) Theoritical Evaluation of Flow Through Mixed Flow Compressor. In: 19th International Symposium on Air Breathing Engines, September 2009, Montrel,Canada.

Ramamurthy, S and Thennavarajan, S (2008) Cost Effective Method for Manufacturing Micro Gas Turbine Components. In: International Conference & Exhibition on Total Engineering,Analysis & Manufacturing Technologies(TEAMTECH 2008), September 2008, IISC,Bangalore.

Ramamurthy, S and Thennavarajan, S (2008) Design and Fabrication of cross corrugated recuperator fins for a micro gas turbine. In: 6th National Seminar & Exhibition on Aerospace Related Mechanisms(ARMS2008), February 2008, ARDE,Pune.

Ramesh, NR and Natarajan, R (1986) Combustion of kerosene-water emulsions using a twin-fluid acoustic atomizer 13; 13;. In: 9th National Conference on I.C. Engines and Combustion, 19-22 Nov 1985, Dehra Dun, India.

Ramesh, TG and Shubha, V and Dutta, Soma (2010) Characterisation techniques for high temperature thermoelectric materials. In: National Workshop on ‘High Temperature Materials in Aerospace Applications’ , 8-9 Jan 2010, Anna University Chennai, India.

Ramesh, V (2011) Unsteady meshfree solver - LSKUM-MN. In: Meshfree-2011 Conference, 10-11 Jan 2011, IISc, Bangalore.

Ramesh, V and Deshpande, SM (2007) Kinetic grid free method for flutter prediction in turbo-machines. In: 7th Asian Computational Fluid Dynamics Conference (ACFD7), 26-30 Nov 2007, Bangalore, India.

Rao, Narayana P and Kashyap, SK and Girija, G (2008) Situation assessment in air-combat: A fuzzy-bayesian hybrid approach. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-063), 26-28 Jun 2008, Bangalore, India.

Rao, PS and Chetty, Shyam (2002) Rapid prototyping tools for commercial autopilots AIAA paper 2002-4651. In: AIAA Guidance, Navigation, and Control Conference and Exhibit, 5-8 Aug 2002, Monterey, California.

Rao, R Srinivasa and Ananda, CM and Venkatanarayana, KG and Preme, M and Nayak, MR (2008) Avionics flight testing of light transport aircraft-modern trends and challenges. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-099), 26-28 Jun 2008, Bangalore, India.

Rao, Raghavendra S and Ravishankar, S (2008) Kinematic analysis of main door locking mechanism for a civil aircraft. In: Aerospace and related mechanisms conference (ARMS08), 28-29 Mar 2008, Pune, India.

Rao, Sandhya and Rao, RMVGK (2008) An emerging, energy-efficient cure process for rapid composite manufacture. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-032), 26-28 Jun 2008, Bangalore, India.

Rao, Sundara G and Venkatesh, T (2008) A study on interconnectivity for flosolver teraflop parallel machine. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-124), 26-28 Jun 2008, Bangalore, India.

Raol, JR (2002) Performance of H-infinity filter-based data fusion algorithm with outliers AIAA Paper 2002-0251. In: 40th AIAA Aerospace Sciences Meeting amp; Exhibit, 14-17 January 2002, Reno, NV.

Ravitej, M and Kesavan, V and Krishnamoorthy, V and Felix, J and Deepak, J (2008) Cooling effectiveness measurements of film cooling configuration on the suction and pressure surface of nozzle guide vane. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-036), 26-28 Jun 2008, Bangalore, India.

Sahoo, PK and Dattaguru, B and Murthy, CRL (2006) Finite Element Analysis of Adhesively Bonded Lap Joints. In: Proceedings of the 14th National Seminar on Aersopace Structures: Fatigue, Fracture and Ageing Structures, 30-31 Jan 2006, Nagpur, India.

Sahoo, PK and Manjunatha, CM and Dattaguru, B (2007) FEM analysis of Lap shear joint. In: ICRACM 07, Feb. 07, New Delhi, India.

Sahoo, PK and Manjunatha, CM and Dattaguru, B (2008) Failure prediction of adhesively bonded lap joints between metal and composite adherends. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-096), 26-28 Jun 2008, Bangalore, India.

Saji, D and Varughese, Byji and Pradhan, SC (2008) Finite element analysis for thermal buckling behaviour in functionally graded plates with cut-outs. In: Proceedings of the International conference on Aerospace Science and Technology (INCAST 2008-113), 26-28 Jun 2008, Bangalore, India.

Salem, Stanley C and Gowda, MNN and Ramachandra, HV and Kamath, GM and Subbarao, M (2007) Development of cglare: Design, fabrication and characterisation. In: Proceedings of the National Seminar INCCOM-6 on future trends in Composite Materials and Processing, Dec 2007, Kanpur, India.

Sankaranarayanan, S and Ramamurthy, S and Murugesan, K (1981) Performance Testing and R&D Work on Centrifugal Compressor in Closed Circuit Test Rigs. In: 10th National Conference on FMFP. (Submitted)

Sankaranarayanan, S and Ramamurthy, S and Murugesan, K and Ramachar, D and Rajendran, R Flow Investigation in Centrifugal Compressor Diffuser. In: Workshop on Experimental Fluid Mechanics and Turbomachinery. (Submitted)

Sanketh , Ailneni and Sudesh, K Kashyap and Shantha Kumar, N (2013) INS/GPS Fusion for Navigation of Unmanned Aerial Vehicles. In: 9th International Conference on Intelligent Unmanned Systems, 25-27 September 2013, Jaipur.

Sarangi, AK and Ramesh, A and Mehta, Pramod S (2006) Performance evaluation of a mini I.C.engine (SAE paper No. 2006-32-0056). In: International Small Engine Technology Conference and Exhibition, 13-16 Nov 2006, Texas, USA.

Sarvana, BV and Gopalkrishna, VD and Venkatachalam, K and Jaman, PM and Divakar, C and Singh, AK (1994) Design and fabrication of a 600-ton press for sintering studies. In: National Conference on High Pressure Science and Technology, 10-11 Oct 1994, Bangalore, India.

Savanur, RA and Mudkavi, Vidyadhar Y (2008) Aeroelastic study of wind turbine blade. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-123), 26-28 Jun 2008, Bangalore, India.

Savanur, SR and Kashyap, SK and Raol, JR (2008) Adaptive neuro-fussy based control surface fault detection and reconfiguration. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-027), 26-28 Jun 2008, Bangalore, India.

Saxena, S and Nair, M (2005) An Improved Roe Scheme for Real Gas Flows. In: 43rd AIAA Aerospace Sciences Meeting and Exhibit, 10-13 January 2005, Reno, Nevada.

Saxena, SK (1993) Hypersonic viscous flow computations. In: Proceedings of the Fluid Dynamics Symposium in Honour of Professor R. Narasimha on his 60th Birthday, 1993, Sikkim.

Saxena, SK and Nair, Manoj T (2002) Implementation and testing of Spalart-Allmaras model in a multi-block code AIAA Paper 2002-0835. In: 40th AIAA Aerospace Sciences Meeting amp; Exhibit, January 14-17, 2002, Reno, NV.

Seetharam, SA and Dash, PK (1990) Analysis of short crack growth test data. In: 40th Annual General Meeting of Aeronautical Society of India, 19-20 Dec 1988, Madras, India.

Seetharam, SA and Dash, PK and Raju, KN and Balaraman, K (1990) Short through cracks from a blunt notch under constant amplitude loading. In: 4th International Conference on Fatigue and Fatigue Thresholds, 15-20 July 1990, United Kingdom.

Sengupta, TK and Dipankar, A and Kumaravel, G and Naresh, Kumar (2007) Response of a projectile to acoustic and entropic excitation at hypersonic mach number. In: 4th International Conference on Theoretical, Applied, Computational and Experimental Mechanics (ICTACEM), 27-29 Dec 2007, Kharagpur, India.

Sengupta, TK and Selvarajan, S and Suryanarayana, GK (1987) Numerical simulation of turbulent boundary layers over rigid and deformable surfaces. In: Proceedings of the 5th International Conference on Numerical methods in laminar and turbulent flow, 6-10 July 1987, Canada, United States.

Senthil Kumar, P and Jayasankar, S and Kamaleshiah, MS and Prashanth, N.S. and Paulsingh, Alfred and Dayananda, GN (2011) Development and Wind Tunnel Evaluation of a SMA Based Trim Tab Actuator for a Civil Aircraft. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.

Senthilkumar, P and Jayasankar, S and Satisha, Vishwanath and Kamaleshaiah, M.S. and Prashanth, N.S. and Alfred , Paulsingh and Dayananda, GN (2011) Development and Wind Tunnel Evaluation of an SMA Based Trim Tab Actuator for a Civil Aircraft. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore.

Shantha Kumar, N and Kashyap, SK and Naidu, VPS and Girija, G (2008) Interactive multiple model seeker filter for tracking evasive targets. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-045), 26-28 Jun 2008, Bangalore, India.

Sharma, S and Singh, H and Jha, RM (2007) Novel semi-blind equalization scheme for robustness enhancement in adaptive arrays. In: International Symposium on Electromagnetics Theory - EMTS-2007, 26-28 Jul 2007, Ottawa, ON, Canada.

Sharnappa, * and Dutta, Vimala and Dutta, PK (2006) Viscous unsteady flow around a helicopter rotor blade in forward flight. In: 9th Proceedings of AeSI CFD symposium, 11-12 Aug 2006, Bangalore,India.

Shashidhara, KN and Radhakrishna, M and Sarangi, AK (2006) Bump foil bearings for high speed and low load applications - A preliminary feasibility study. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, 12-14 Dec 2006, Pune, India.

Shembharkar, TR and Pai, BR (1986) Prediction of liquid film cooling in presence of wall heat flux 13; 13;. In: 8th International Conference on Heat Transfer, 17-22 Aug 1986, San Francisco, United States.

Shivaprasad, GK and Radhakrishna, M and Jana, S and Arunkumar, V (2006) Nut Factor Studies in Bolted Joints. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, DIAT,Pune. (Submitted)

Shivaprasad, GK and Radhakrishna, M and Jana, S and Arunkumar, V (2006) Nut factor studies in bolted joints. In: 8th National Conference on Air Breathing Engines and Aerospace Propulsion, 12-14 Dec 2006, Pune, India.

Singh, AK (1992) The fcc-bcc transition in ytterbium under high pressurization rates. In: Recent Trends in High Pressure Research, 1993.

Singh, DB and Suprabha, PS and Gopinath, PR and Muralidhara, HS and Mohan, SR and Koner, D (2011) Calibration of conical mass flow control device for air intake model tests. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.

Singh, GK and Claassens, J (2010) An analytical solution for the inverse kinematics of a redundant 7DoF Manipulator with link offsets. In: International Conference on Intelligent Robots and Systems (IROS) 2010 IEEE/RSJ , 18-22 Oct. 2010, Taipei, Taiwan .

Singh, H and Jha, RM (2008) A novel DF-GSC-based algorithm for active cancellation of hostile probing sources. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-137), 26-28 Jun 2008, Bangalore, India.

Singh, Jatinder and Kumar, Vineet and Basappa, - and Panda, GK (2008) Identification of Saras flight stability and control characteristics. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-116), 26-28 Jun 2008, Bangalore, India.

Singh, KL (2006) Analysis of Flight Parameters to Derive Load Spectrum Sequence for Full Scale Fatigue Testing of an Ageing Aircraft. In: Proceedings of the 14th National Seminar on Aerospace Structures: Fatigue, Fracture and Ageing Structures, 30-31 Jan 2006, Nagpur, India.

Singh, Manish K and Dhanalakshmi, K and Chakrabartty, SK (2006) Navier-stokes analysis of airfoils with Gurney flap. In: 9th Proceedings of AeSI CFD symposium, 11-12 Aug 2006, Bangalore, India.

Singh , KL and Ranganath, VR (2007) Cycle counting using rainflow algorithm for fatigue analysis. In: 15th National Conference on Aerospace Structures, 15-16 Oct 2007, Coimbatore, Tamil Nadu, India.

Sivapragasam, M and Ramamurthy, S and Deshpande, MD and Sridhara, SM (2009) Computation of Turbulent Jets in Annual Counter Flow. In: 11th Annual CFD Symposium, 11-12th August 2009, IISC,Bangalore.

Srilatha, KR and Narayana, CL and Premalatha, . and Mudkavi, Vidyadhar Y (2007) Performance analysis of AFT mounted propeller for a light transport aircraft. In: 7th Asian Computational Fluid Dynamics Conference (ACFD7), 26-30 Nov 2007, Bangalore, India.

Srinathkumar, S (2008) Eigenstructure Control: A flight vehicle handling qualities design tool. In: Proceedings of the International Conference on Aerospace Science and Technology, 26-28 Jun 2008, Bangalore, India.

Srinivasa, C (1986) Performance analysis of a mixed flow turbofan engine at the design point 13; 13;. In: 9th National Conference on I.C. Engines and Combustion, 19-22 Nov 1985, Dehra Dun, India.

Srinivasa, V and Jangir, SC and Kumar, MR and Ramachandra, HV and Sudheendra, HN and Madhava, MR (2008) Non-destructive evaluation of co-cured wing for SARAS. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-024), 26-28 Jun 2008, Bangalore, India.

Stollery, JL and Murthy, AV (1978) Intermittent High Reynolds number wind tunnel AIAA-78-766. In: 10th Aerodynamic Testing Conference.

Sudheendra, VS and Ramamurthy, S and Murugesan, K (1999) Transient Thermal Analysis of a Turbine Rotor. In: NAL-CAE Workshop, Bangalore. (Submitted)

Sugun, BS and Rao, RMVGK and Venkatasubramanyam, D (2008) Cost-effective approach for the manufacture of fibre metal laminates (FML). In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-041), 26-28 Jun 2008, Bangalore, India.

Sujata, M and Venkataswamy, MA and Parameswara, MA and Suresh Kumar, M and Bhaumik, SK (2006) Failure of life extended rotor discs of aeroengines. In: Proceedings of the 14th National Seminar on Aerospace Structures: Fatigue, Fracture and Ageing Structures, 30-31 Jan 2006, Nagpur, India.

Sundaram, Ramesh (2008) Resin infusion technology for development of primary aircraft structures. In: Proceedings of the National Conference on Advanced Materials for Aerospace and Defence Applications (ADMAT-2008), 7-8 Jan 2008, Coimbatore, Tamil Nadu, India.

Sundaramurthy, H and Narayan, KY and Suryanarayana, GK and Lochan, Rajeev and Sasidharan Nair, KG (1986) Wind tunnel investigation of strap-on booster separation characteristics of a launch vehicle. In: 2nd National Conference on Aerodynamics, 19-20 Dec 1986, Bangalore, India.

Sunder, R (1979) A method for constant amplitude fatigue crack propagation data correlation. In: Fracture Mechanics in Engineering Application, 26-30 Mar 1979, Bangalore, India.

Sura, NK and Patel, VV and Deodhare, G and Chetty, Shyam (2008) Structural stability margin criteria for accelerated clearance of developmental flights. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-117), 26-28 Jun 2008, Bangalore, India.

Suriyanarayanan, P and Venkatakrishnan, L (2008) PIV measurements on an air blast atomiser. In: Proceedings of the 12th Asian Congress of Fluid Mechanics, 18-21 Aug 2008, Daejeon, Korea.

Suryanarayana, GK (2009) Overview of NTAF activities and perspective for future. In: National Conference on Wind Tunnel Testing (2009-IT8), 12-14 Mar 2009, IISc., Bangalore.

Suryanarayana, GK and Basavaraju, NR and Suprabha, PS (2009) Concept of variable mach number flexible nozzle and controls for NAL 0.6m blowdown wind tunnel. In: National Conference on Wind Tunnel Testing 2009-CP18, 12-14 Mar 2009, IISc., Bangalore.

Suthar, Rajnikumar N and Ramamurthy, S and Shembharkar, TR and Mayavanshi, VK (2006) Effects of tip clearance on centrifugal compressor performance. In: Proceedings of National Conference on CFD Applications in Power and Industry Sectors, 17-18 Nov 2006, Hyderabad, India.

Vaitheeswaran, SM (2007) Aircraft recognition system using ann and moment invariants. In: International Radar Symposium India, IRSI 2007, 10-13 Dec 2007, Bangalore, India.

Vaitheeswaran, SM (2008) Radar backscatter data of vehicles for automatic target recognition. In: International Conference for Avionics, ICAS, 22-23 Feb 2008, Hyderabad, India.

Vaitheeswaran, SM (2007) Target spectral features for identification into radar. In: International Radar Symposium India, IRSI 2007, 10-13 Dec 2007, Bangalore, India.

Varughese, Byji and Dayananda, GN and Subba Rao, M (2008) Modeling the behaviour of an advanced material based smart landing gear system for aerospace vehicles. In: International Workshop on quot;Smart deeling of Material Systems (SDMoMS'08), Jan 2008, Chennai, India.

Venkatakrishnan, L (2004) Density Measurements in an Axisymmetric Underexpanded Jet Using Background Oriented Schlieren Technique 2004-2603. In: 24th AIAA Aerodynamic Measurement Technology and Ground Testing Conference, 28 June -1 July 2004, Portland, Oregon.

Venkatakrishnan, L and Karthikeyan, N and Mejia, K (2011) Experimental studies on a rudimentary four-wheel landing gear. AIAA 2011-354. In: 49th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition, 4-7 January, 2011, Orlando, Florida.

Venkatakrishnan, L and Karthikeyan, N and Verma, SB (2009) Effect of spike truncation on of the acoustics of an annular aerospike Nozzle Flow. In: 30th AIAA Aerocoustics Conference, 11-13 May 2009, Miami, Florida, USA.

Venkatakrishnan, L and Suriyanarayanan, P and Mathur, NB (2007) BOS density measurements in afterbody flows with shock13; and jet effects AIAA 2007-4223. In: 37th AIAA Fluid Dynamics Conference and Exhibit, 25-28 Jun 2007, Miami, FL..

Verma, S. B (2005) Goertler Vortex Formation During Shut Down Sequence Inside a Thrust Optimized Parabolic (TOP) Rocket Nozzle 2005-518. In: 43rd AIAA Aerospace Sciences Meeting and Exhibit, 10-13 January 2005, Reno, Nevada.

Verma, SB and Haidn, Oskar (2007) Flow Separation Studies in a Subscale Truncated Ideal Contour Nozzle. In: 45th AIAA Aerospace Sciences Meeting and Exhibit, 8-11 Jan 2007, USA.

Verma, SB and Stark, R and Haidn, O (2011) Gas density effects on dual-bell transition behavior. In: 4th European Conference for AeroSpace Sciences (EUCASS), 4-8 Jul. 2011, St. Petersburg, Russia.

Verma, SB and Venkatakrishnan, L and Ramesh, G (2007) 2-D PIV study of near-field flow development from a 2:1 elliptic jet with tabs AIAA-2007-4498. In: 37th AIAA Fluid Dynamics Conference and Exhibit, 25-28 Jun 2007, Miami, FL..

Vijaya Vittala, NG and Pankaj, AC and Swarnalatha, R (2008) Dynamic and aeroelastic analysis of a trasnport aircraft. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-057), 26-28 Jun 2008, Bangalore, India.

Viswanath, P. R (1999) Drag reduction of afterbodies by controlled separated flows - Generic study AIAA Paper 99-0274. In: 37th AIAA Aerospace Sciences Meeting and Exhibit, January II-14,1999, Reno, NV.

Viswanath, P. R (1999) Riblets on airfoils and wings - A review AIAA Paper 99-3402. In: 30th AlAA Fluid Dynamics Conference, 28 June - 1 July, 1999, Norfolk, VA.

Viswanath, P. R and Mukund, R (2004) Relaminarization on swept leading edges under high-lift conditions 2004-99. In: 42nd AIAA Aerospace Sciences Meeting and Exhibit, 5-8 January 2004, Reno, Nevada.

Viswanath, PR (2006) Boundary layer separation control by manipulation of shear layer reattachment. In: IUTAM Symposium on One Hundred Years of Boundary Layer Research, 12-14 Aug 2004, Gottingen, Germany.

Viswanath, PR and Madhavan, K (2003) Control of Trailing-edge Separation by Tangential Blowing Inside Bubble:A Novel Approach AIAA-2003-223. In: 41st Aerospace Sciences Meeting and Exhibit, 6-9 January 2003, Reno, Nevada.

Viswanath, S and Chandra, Satish and Biswas, Kanchan (2006) Development of Vibration Specifications for LRUs on Fighter Aircraft from Flight Data. In: Proceedings of the 14th National Seminar on Aerospace Structures: Fatigue, Fracture and Ageing Structures, 30-31 Jan 2006, Nagpur, India.

Vyas, JJ and Mudkavi, Vidyadhar Y (2008) Two dimensional unsteady flow over an open acoustic cavity. In: Proceedings of International Conference on Aerospace Science and Technology (INCAST 2008-017), 26-28 Jun 2008, Bangalore, India.

Yadav, R and Jugseniya, Chandrakant B and Pashilkar, Abhay A (2005) Thermodynamic analysis of turbofan engine. In: ASME Turbo Expo 2005: Power for Land, Sea, and Air (GT2005) , June 6–9, 2005, Reno, Nevada, USA .

Yadav, R and Kapadi, Yogesh and Pashilkar, Abhay (2005) Aero-thermodynamic model for digital simulation of turbofan engine. In: ASME Turbo Expo 2005: Power for Land, Sea, and Air (GT2005) , June 6–9, 2005 , Reno, Nevada, USA.

kumar, Ramesh M and Madhava, MR (2008) Acoustic emission signature analysis of failure modes in composites. In: ISAMPE National Conference on Composites : INCCOM-7, 4-5 Dec 2008, Bangalore, India.

Journal Article

Ananda, CM and Nair, Sabitha and Mainak, GH (2013) ARINC 653 API and its application – An insight into Avionics System Case Study. Defence Science Journal, 63 (2). pp. 223-229. ISSN 0011-748X

Anandan, C and Rajam, KS (2007) Composition, structure and morphology of oxide layers formed on austenitic stainless steel by oxygen plasma immersion ion implantation. Applied Surface Science, 253 . pp. 6854-6859.

Anjana, Jain and Vijayan, Kalyani (2007) Effect of thermal aging on the crystal structural characteristics of TEFLON. Polymer Engineering and Science, 47 (11). 1724 -1729.

Arun Kumar , KN and Lohith, N and Ganesh, BB (2012) Effect of ribs and stringer spacings on the weight of aircraft structure for aluminum material. Journal of Applied Sciences, 12 (10). pp. 1006-1012. ISSN 1812-5654

Arunkumar, V and Kaushal, SC (1987) Experimental Study on the behavior of damper bearing plane stiffness in squeeze film mounted rotor systems. International journal of Turbo and Jet Engines, 4 . ISSN 03340082 (Submitted)

Balakrishna, S and Santharam, A (1976) One axis artificial feel system (pilot proprioceptive cue forces on aircraft joy stick). Journal of Aeronautical Society of India, 28 . pp. 231-236.

Balaraju, JN and Anandan, C and Rajam, KS (2006) Influence of codeposition of copper on the structure and morphology of electroless Nix2013;Wx2013;P alloys from sulphate- and chloride-based baths. Surface and Coatings Technology, 200 (12-13). pp. 3675-3681.

Balaraju, JN and Anandan, C and Rajam, KS (2005) Morphological study of ternary Nix2013;Cux2013;P alloys by atomic force microscopy. Applied Surface Science, 250 (1-4). pp. 88-97.

Balaraju, JN and Jahan, SM and Rajam, KS (2006) Studies on autocatalytic deposition of ternary Nix2013;Wx2013;P alloys using nickel sulphamate bath. Surface and Coatings Technology, 201 (3-4). pp. 507-512.

Balaraju, JN and Kalavati, -- and Rajam, KS (2010) Electroless ternary Ni-W-P alloys containing micron size Al2O3 particles. Surface and Coatings Technology, 205 . pp. 575-581. ISSN 0257-8972

Balaraju, JN and Kalavati, -- and Rajam, KS (2009) Surface morphology and structure of electroless ternary NiWP deposits with various W and P contents. Journal of Alloys and Compounds, 486 . pp. 468-473. ISSN 0925-8388

Balaraju, JN and Manju, C (2012) Electroless ternary NiCeP coatings: Preparation and characterisation. Applied Surface Science, 258 (24). pp. 9692-9700. ISSN 0042-207X

Balaraju, JN and Rajam, KS (2005) Electroless deposition of Nix2013;Cux2013;P, Nix2013;Wx2013;P and Nix2013;Wx2013;Cux2013;P alloys. Surface and Coatings Technology, 195 (2-3). pp. 154-161.

Balasubramanian, TS and Arunkumar, V and Jayaraman, M (1996) Anti Resonance concept applied to rotors. Journal of the Aeronautical Society of India, 48 (2). pp. 158-160.

Barshilia, Harish C and Rajam, KS and Sridhara Rao, DV (2005) Characterization of low temperature deposited nanolayered TiN/NbN multilayer coatings by cross-sectional transmission electron microscopy. Surface amp; Coatings Technology, 200 (14-15). pp. 4586-4593.

Barshilia, Harish C and Surya Prakash, M and Aithu, Poojari and Rajam, KS (2004) Corrosion behavior of nanolayered TiN/NbN multilayer coatings prepared by reactive direct current magnetron sputtering process. Thin Solid Films, 460 (1-2). pp. 133-142.

Barshilia, Harish C and Surya Prakash, M and Sridhara Rao, DV and Rajam, KS (2004) Superhard nanocomposite coatings of TiN/a-C prepared by reactive DC magnetron sputtering. Surface amp; Coatings Technology, 195 (2-3). pp. 147-153.

Bera, Parthasarathi and Seenivasan, H and Rajam, KS and William Grips, VK (2012) Characterization of amorphous Co–P alloy coatings electrodeposited with pulse current using gluconate bath. Applied Surface Science, 258 (24). pp. 9544-9553. ISSN 0169-4332

Bera, Rajendra K (1988) Quadrature formula for a double-pole singular integral ((in linear lifting surface theory). AIAA Journal, 26 . pp. 752-754. ISSN 0001-1452

Bera, Rajendra K and Suresh, G (1989) Comments on the lawrence equation for low-aspect-ratio wings. Journal of Aircraft, 26 (9). pp. 883-885. ISSN 0021-8669

Bharathibai, Basu J and Dinesh Kumar, V and Anandan, C (2012) Surface studies on superhydrophobic and oleophobic polydimethylsiloxane-silica nanocomposite. Applied Surface Science, 261 . pp. 807-814. ISSN 0042-207X

Bhaumik, SK (2010) Root cause analysis in engineering failures. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 297-299. ISSN 0019-493X

Bhaumik, SK and Sujata, M and Venkataswamy, MA (2008) Fatigue failure of aircraft components. Engineering Failure Analysis, 15 (6). pp. 675-694.

Chakrabartty, SK (1990) Vertex-based finite-volume solution of the two-dimensional Navier-Stokes equations. AIAA Journal, 28 (10). pp. 1829-1831. ISSN 0001-1452

Chandra, R (1976) On twisting of orthotropic plates in a large deflection regime. AIAA Journal, 14 (8). pp. 1130-1131. ISSN 0001-1452

Chatterjee, A and Jayaraman, A and Ramaseshan, S and Singh, AK (1972) Pressure-induced electron collapse and structure changes in rare earth monochalogenides. Physics Review B, 6 . pp. 2285-2291.

Chattopadhyay, Lalitha (2012) Analytical determination of buckling load of a delaminated plate subjected to axial compression. International Journal of Applied Mathematics and Mechanics, 8 (18). pp. 38-51. ISSN 0973-0184

Chattopadhyay, Lalitha (2011) Analytical solution for bending stress intensity factor from Reissner's plate theory. Engineering, 3 (5). pp. 517-524.

Chattopadhyay, Lalitha and Jain, PK (2012) Buckling load and post-buckling solution for mode shape of delaminated beam. International Journal of Engineering and Applied Sciences, 4 (2). pp. 59-66.

Chattopadhyay, Lalitha and Murthy, Sridhara S (2008) Bending stress intensity factors of an elastic plate containing two equal collinear cracks and subjected to a concentrated moment. International Journal of Applied Mathematics and Mechanics, 4 (4). pp. 59-75. ISSN 0973-0184

Chattopadhyay, Lalitha and Murthy, Sridhara S and Viswanath, S (2007) Exact solution for bending of an elastic plate containing a crack and subjected to a concentrated moment. International Journal of Computational Methods, 4 (2). pp. 265-281. ISSN 1793-6969

Chattopadhyay, Lalitha and Sivaranjani, T (2012) Cohesive zone model for debond failure in plated beam using transverse shear deformation theory. International Journal of Applied Mathematics and Mechanics, 8 (8). pp. 22-33. ISSN 0973-0184

Chattopadhyay, Lalitha and Sridhara Murthy, S (2011) Analytical and finite element modeling simulation of buckling and postbuckling of delaminated orthotropic plates. International Journal of Modeling, Simulation and Scientific Computing, 2 (1). pp. 97-104.

Chopra, I (1975) Flutter of a panel supported on an elastic foundation. AIAA Journal, 13 (5). pp. 687-688. ISSN 0001-1452

Choudhury, Balamati and Sangeetha, M and Jha , RM (2013) Particle swarm optimization for multiband metamaterial fractal antenna. Journal of Optimization, 2013 . pp. 1-9. ISSN 1573-2878

Choudhury, Balamati and Singh, Hema and Bommer, JP and Jha , RM (2013) RF field mapping inside large passenger aircraft cabin using refined ray-tracing algorithm. IEEE Antennas and Propagation Magazine, 55 (1). pp. 276-288.

Chowdhury, P and Kulkarni, PD and Krishnan, M and Barshilia, Harish C and Sagdeo, A and Rai, SK and Lodha, GS and Sridhara Rao, DV (2012) Effect of coherent to incoherent structural transition on magnetic anisotropy in Co/Pt multilayers. Journal of Applied Physics, 112 (2). 023912-1-023912-8. ISSN 0021-8979

Dayananda, GN and Varughese, B and Subba Rao, M (2007) Shape memory alloy based smart landing gear for an airship. Journal of Aircraft, 44 (5). pp. 1469-1477.

Deshpande, MD and Milton, S George (1998) Kolmogorov scales in a driven cavity flow. Fluid Dynamics Research, 22 (6). pp. 359-381.

Deshpande, SM and Ramesh, V and Malagi, Keshav and Arora, Konark (2010) Least squares kinetic upwind mesh-free method. Defence Science Journal, 60 (6). pp. 583-597. ISSN 0011-748X

Dhananjaya, N and Nagabhushana, H and Nagabhushana, BM and Rudraswamy, B and Sharma, SC and Sunitha, DV and Shivakumara, C and Chakradhar, RPS (2012) Effect of different fuels on structural, thermo and photoluminescent properties of Gd2O3 nanoparticles. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 96 . pp. 532-540.

Divakar, C and Mohan, M and Singh, AK (1980) The D.C. Voltage-dependent resistivity Of CuCI powder compacts under pressure. Solid State Communication, 34 . pp. 385-387.

Divakar, C and Mohan, M and Singh, AK (1980) DC voltage-dependent resistivity of CuCl powder compacts under pressure. Solid State Communications, 34 . pp. 385-387.

Divakar, C and Murali, Mohan (1984) The kinetics of pressure induoed fcc-bcc transformation in ytterbium. Journal of Applied Physics., 56 . pp. 2337-2340.

Downs, RT and Singh, AK (2006) Analysis of deviatoric stress from nonhydrostatic pressure on a single crystal in a diamond anvil cell : The case of monoclinic aegirine, NaFeSi2O6. Journal of Physics and Chemistry of Solids, 67 (9-10). pp. 1995-2000. ISSN 0022-3697

Dutta, Soma and Shubha, V and Ramesh, TG (2010) Effect of pressure and temperature on thermopower of Bix2013;Sb alloys. Physica B: Condensed Matter, 405 (5). pp. 1239-1243.

Dutta, Soma and Shubha, V and Ramesh, TG and D'Sa, Florita (2009) Thermal and electronic properties of Bi1 x2212; xSbx alloys. Journal of Alloys and Compounds, 467 (1-2). pp. 305-309.

Ghosh, SK and Chowdhury, P and Dogra, A (2013) Magnetic and magnetoresistance studies of the evolution of the magnetic layer structure with Co layer thickness in electrodeposited Co–Cu/Cu multilayers. Journal of Magnetism and Magnetic Materials, 327 . pp. 121-124. ISSN 0304-8853

Girija, G and Parameswaran, V and Raol, JR and Srinathkumar, S (1991) Estimation of lift and drag characteristics of an aircraft from flight data. Journal of Aeronautical Society of India, 43 (4). pp. 285-292.

Gopalakrishna, K and Sivaprasad, K and Venkateswarlu, K and Harikumar, KC (2012) Microstructural evolution and aging behavior of cryorolled Al–4Zn–2Mg alloy. Materials Science and Engineering A, 535 . pp. 129-135. ISSN 0921-5093

Gupta, Nitesh and Ramesh, Sundaram (2009) Fiber Optic Sensors for Monitoring Flow in Vacuum Enhanced Resin Infusion Technology VERITy Process. Composites Part A: applied Science and Manufacturing, 40 . pp. 1065-1070. ISSN 1359-835X

Guruprasad, R and Marimuthu, P (2013) Aerospace Digital Libraries and Its Impact on Aerospace Scientists and Engineers of Bangalore - A Research Survey. International Journal of Advanced Research in IT and Engineering (IJAET), 2 (3). pp. 33-49. ISSN 2278-6244

Guruprasad, R and Marimuthu, P Association of Demographic Variables Versus Frequency of Use ofAerospace Indexing, Abstracting and Citation Services - A Research Survey of Aerospace Scientists and Engineers of Bangalore. International Journal of Advanced Research in IT and Engineering (IJAET), 2 (7). pp. 21-38. ISSN 2278-6244

Guruprasad, R and Marimuthu, P (2014) Association of Demographic Variables Versus the Role of the Library in Promoting e-Resources among the Aerospace Scientists and Engineers of Bangalore: A Research Survey. Science and Technology / Association of Demographic Variables Versus the Role of the Library in Promoting e-Resources among the Aerospace Scientists and Engineers of Bangalore: A Research Survey, 1 (1). pp. 4-11.

Guruprasad, R and Marimuthu, P (2013) ‘Association of Demographic Variables versus Frequency of Use of Aerospace Gateways’: A Survey of Aerospace Scientists and Engineers of Bangalore. International Journal of Advanced Research , 1 (3). pp. 175-183. ISSN 2320-5407

Guruprasad, R and Marimuthu, P (2013) Association of demographic variables versus frequency of use of core aerospace engineering e-Databases: a research survey of aerospace scientists and engineers of Bangalore. International Journal of Science, Technology and Society., 1 (1). pp. 1-8.

Guruprasad, R and Marimuthu, P (2013) Digital libraries (internet resources) of Ph.D. dissertations and theses and its impact among the aerospace scientists and engineers of Bangalore. DISCOVERY SCIENCE, 4 (10). pp. 4-8. ISSN 2278-5485, EISSN: 2278-5477

Guruprasad, R and Marimuthu, P (2014) Location of Articles From E-Journals: Information Seeking Behaviour of The Aerospace Scientists and Engineers Of BANGALORE. International Journal of Engineering Science & Advanced Technology , 3 (3). pp. 109-116. ISSN 2250-3676

Guruprasad, R and Marimuthu, P (2013) Open Access Journals and its Use Patterns Among The Aerospace Scientists AND Engineers of Bangalore. International Journal of Advances in Engineering and Technology, 6 (3). pp. 1109-1122. ISSN 2231-1963

Guruprasad, R and Marimuthu, P (2013) Use Patterns of Aerospace Engineering E-Reference Sources among the Aerospace Scientists and Engineers of Bangalore: A Research Survey. International Journal of Engineering and Management Research, 3 (6). pp. 57-63. ISSN 2250-0758

Guruprasad, R and Marimuthu, P and Nikam, Khaiser (2013) Use Patterns of E-Journals from Aerospace Professional Associations by the Aerospace Scientists and Engineers of Bangalore. International Journal of IT, Engineering and Applied Sciences Research (IJIEASR), 2 (3). pp. 39-53. ISSN 2319 - 4413

Guruprasad, R and Nikam, Khaiser (2010) E-Journals and their Usage Patterns Amongst the Indian Aerospace Scientists and Engineers in Bengaluru. E-Journals and their Usage Patterns Amongst the Indian Aerospace Scientists and Engineers in Bengaluru, 30 (6). pp. 31-38. ISSN Print 0971-4383

Haleem, BA and Bhuvana, R and UdayaKumar, A (2009) Gelcasting of Strontium Doped Lanthanum Manganite for Solid Oxide Fuel Cell Applications. Transactions of the Indian Ceramic society, 68 . ISSN 0371-750X

Hussain, GF and Nasser, AS and Nawaz, MM and Mondal, BK and Karthikeyan, N (2013) Effect of perforated tabs on the noise field of an axisymmetric jet. Applied Mechanics and Materials, 307 . pp. 250-256. ISSN ISSN: 1662-7482

Jafarali, P and Chattopadhyay, Lalitha and Prathap, Gangan and Rajendran, S (2004) Error analysis of a hybrid beam element with Timoshenko stiffness and classical mass. International Journal of Computational Engineering Science, 5 (3). pp. 495-508.

Jagannadham, VV and Anandan, C and Divya Rao, RG and Rajam, KS and Raina, Gargi (2012) Effect of bipolar pulsed voltage on properties of DLC films deposited by inductivity coupled PECVD. International Journal of Engineering Research and Applications (IJERA), 2 (4). pp. 2034-2042. ISSN 2248-9622

Jana, S and Arunkumar, V (2005) 5-Axes Levitation of a Rotor by Active Magnetic Bearings Employing Direct Output Feedback Control. Journal of Aerospace Sciences and Technologies . (Submitted)

Jarali, Chetan S and Raja, S and Upadhya, AR (2010) Constitutive modeling of SMA SMP multifunctional high performance smart adaptive shape memory composite. Smart Materials and Structures, 19 (10). ISSN 0964-1726

Jayaraman, Chatterjee A and Ramaseshan, S and Singh, AK (1972) Pressure-induced electronic and structural transformation in some rare earth monochalcogenides. Acta Crystallographica, A28 . S243-S243.

Jayasankar, S and Senthil Kumar, P and Varughese, Byji and Ramanaiah, B and Satisha, Vishwanath and Ramachandra, HV and Dayananda, GN (2011) Smart Aerodynamic Surface for a Typical Military Aircraft Using Shape Memory Elements. Journal of Aircraft, 48 (6). pp. 1968-1977. ISSN 0021-8669

Joshi, A and Madhusudhan, S (1991) Sensitivity of free vibration charecteristices of cantilever plates to geometric parameters. Journal of Sound and Vibration, 145 (3). pp. 489-494.

Kamali, C and Pashilkar, AA and Raol, JR (2007) Real time parameter estimation for reconfigurable control of unstable aircraft. Defence Science Journal, 57 (4). pp. 527-537.

Kamali, C and Pashilkar, Abhay and Indira, N and Goyal, Anup and Premalatha, - and Mudkavi, Vidyadhar Y (2013) Modeling and Simulation of Wake Encounter for a Fighter Aircraft. International Journal of Aerospace Innovations, 4 (3-4). pp. 65-74. ISSN 1757-2258

Karthikeyan, K and Ramachandra, S and Vizhian, Paul S and Chandra, Satish (2011) Signal processing, wavelets and high-speed image interpretation of bird impact. Defence Science Journal, 61 (1). pp. 62-71. ISSN 0011-748X

Karthikeyan, N and Kumar, Ashwin and Verma, SB and Venkatakrishnan, L (2013) Effect of Spike Truncation on the Acoustic Behavior of Annular Aerospike Nozzles. AIAA Journal, 51 (9). pp. 2168-2182. ISSN 0001-1452

Karthikeyan, N and Venkatakrishnan, L (2011) New approaches for analysis of jet noise data. Journal of Aerospace Sciences and Technology, 63 (1). pp. 89-106. ISSN 0972-950X

Karuppannan, D and Rawat, RS and Ramachandra, HV and Saji, D and Byji, Varughese (2013) Composite for reinforcement of damaged metallic aircraft wings. Journal of Aerospace Sciences and Technology, 65 (1). pp. 8-13. ISSN 0972-950X

Khatri, AK and Jatinder, Singh and Sinha, NK (2012) Aircraft maneuver design using bifurcation analysis and sliding mode control techniques. Journal of Guidance, Control and Dynamics, 35 (5). pp. 1435-1449. ISSN 0731-5090

Khatri, AK and Sinha, NK (2013) Accessible regions for controlled aircraft maneuvering. Journal of Guidance, Control and Dynamics, 36 (6). pp. 1829-1834. ISSN 0731-5090

Kidambi, R (2009) Capillary damping of inviscid surface waves in a circular cylinder. Journal of Fluid Mechanics, 627 . pp. 323-340.

Kidambi, R (2009) Viscous oscillations in a circular cylinder with an elastic cover on the free surface. Journal of Engineering Mathematics, 64 (3). pp. 269-284.

Kodanda, B and Pai, BR (2003) HISTORY OF POWERED FLIGHT. Journal of Aerospace Sciences and Technology, 55 (4). pp. 289-302. ISSN 0972-950X

Kumar, AS and Kumar, BR and Datta, GL and Ranganath, VR (2010) Effect of microstructure and grain size on the fracture toughness of a micro-alloyed steel. Materials Science and Engineering A, 527 (4-5). pp. 954-960. ISSN 0921-5093

Kumar, GV and Rao, KM and Kumar, JS and Raja, S (2011) Selective modal space control approach for smart composite cylindrical shell structure. ARPN Journal of Engineering and Applied Sciences, 6 (3). pp. 67-74. ISSN 1819-6608

Kumar, K Satish and Dattaguru, B and Ramamurthy, TS and Raju, KN (1996) Elasto-plastic contact stress analysis of joints subjected to cyclic loading. Computers amp; Structures, 60 (6). pp. 1067-1077.

Kumar, N and Nair, MT (2013) Application of density corrected Spalart-Allmaras model to flow past ogive cylinder at high angles of attack. Journal of Applied Fluid Mechanics, 6 (3). pp. 375-384. ISSN 1735-3572

Kumar, Nagendra D and Raja, S and Ikeda, T (2007) Active vibration control of smart plates with partially debonded multilayered pzt aatuators. Smart Materials and Structures, 16 . pp. 1584-1594.

Kumar, R and Viswanath, PR and Prabhu, A (2002) Mean and fluctuating pressure in boat-tail separated flows at transonic speeds. Journal of Spacecraft and Rockets, 39 (3). pp. 430-438. ISSN 0022-4650

Kumar, Rajan and Viswanath, PR and Ramesh, ON (2008) Nose blowing for side force control on slender cones at high incidence. Journal of Aircraft, 45 (4). pp. 1156-1166. ISSN 0021-8669

Kumaresan, G and Saraf, Amitabh (2010) Flight calibration of flow angularity sensors on Tejas using advanced parameter estimation techniques. International Journal of Aerospace Innovations, 2 (1 - 2 ). pp. 57-68. ISSN 1757-2258

Lathasree, P and Senthilkumar, T and Madhuranath, Padma (2007) Modelling,simulation, and analysis of HAL Bangalore13; international airport. Defence Science Journal, 57 (6). pp. 866-876.

Liermann, HP and Singh, AK and Somayazulu, M and Saxena, SK (2007) Compression behavior of NbC under nonhydrostatic conditions to 57 GPa 13; 13;. International Journal of Refractory Metals and Hard Materials, 25 (5-6). pp. 386-391.

Mahadeva, Sudha and Giridhar, A and Narasimham, PSL and Singh, AK (1984) Dilametric studies on Ge-Sb-Se classes. Journal of Non-Crystalline Solids, 65 . pp. 233-240.

Mahadik, Satish A and Mahadik, DB and Kavale, MS and Parale, VG and Wagh, PB and Barshilia, Harish C and Gupta, Satish C and Hegde, ND and Rao, AV (2012) Thermally stable and transparent superhydrophobic sol-gel coatings by spray method. Journal of Sol-Gel Sciene and Technology, 63 . pp. 580-586. ISSN 0928-0707

Majeed, M and Kar, IN (2010) Calibration of air data systems using extended kalman filtering technique. International Journal of Aerospace Innovations, 2 (1-2). pp. 133-146. ISSN 1757-2258

Majeed, M and Kar, IN (2013) Design and convergence analysis of stochastic frequency estimator using contraction theory. IET Signal Process, 7 (5). pp. 389-399. ISSN 1751-9675

Majeed, M and Kar, IN (2011) Multi sensor data fusion based approach for the calibration of airdata systems. Aeronautical Journal, 115 (1164). pp. 113-122. ISSN 0001-9240

Majeed, M and Singh, Jatinder and Kar, IN (2012) Identification of aerodynamic derivatives of a flexible aircraft. Journal of Aircraft, 49 (2). pp. 654-658. ISSN 0021-8669

Majumdar, Sekhar and Rajani, BN and Kulkarni, DS and Subrahmanya, MB (2010) Numerical simulation of incompressible turbulent flow using linear eddy viscosity-based turbulence models. Defence Science Journal, 60 (6). pp. 614-627. ISSN 0011-748X

Mandal, AC and Venkatakrishnan, L and Dey, J (2010) A study on boundary-layer transition induced by free-stream turbulence. Journal of Fluid Mechanics, 660 . pp. 114-146. ISSN 0022-1120

Mani, A and Vijayan, Kalyani (1987) X-ray analysis of the effect of grinding on some heat-treated carbons13;. Journal of Materials Science Letters, 6 . pp. 872-874.

Mani, a and Kalyani, Vijayan (1984) Deformation-induced structural transformation in 99.2% pure ytterbium. Current Science, 53 (1). pp. 28-30.

Manisankar, C and Verma, SB and Raju, Channa (2012) Shock-wave boundary-layer interaction study on a compression corner using pressure-sensitive paint. International Journal of Aerospace Innovations, 4 (1-2). pp. 29-39. ISSN 1757-2258

Manjunatha, C and Nagabhushana, BM and Nagabhushana, H and Chakradhar, RPS (2012) Transformation of hydrothermally derived nanowire cluster intermediates into CdSiO3 nanobelts. Journal of Materials Chemistry, 22 . pp. 22392-22397.

Manjunatha, CM and Parida, BK (2004) Prediction of Fatigue Crack Growth After Single Overload in an Aluminum Alloy. AIAA Journal, 42 (8). pp. 1536-1542. ISSN 0001-1452

Manjuprasad, M and Manohar, CS (2007) Adaptive random field mesh refinements in stochastic finite element reliability analysis of structures. Computer Modeling in Engineering amp; Sciences , 19 (1). pp. 23-54.

Marur, SR and Prathap, Gangan (2000) Consistency and correctness evaluation of shear deformable13; anisoparametric formulations. International Journal of Solids and Structures, 37 (5). pp. 701-713.

Mathur, NB and Ramesh, G and Yajnik, KS (1988) Continuous coloured smoke-wire technique for flow visualisation. Journal of Aeronautical Society of India, 40 . pp. 131-137.

Mathur, NB and Sajeer, Ahmed (2012) Test technique for the measurement of intake drag of air-breathing vehicles. Journal of Aircraft, 49 (6). pp. 2093-2095. ISSN 0021-8669

Mohan, M and Divakar, C and Singh, AK (1986) Determination of thermodynamic equilibrium pressure of the fcc-bcc transformation in ytterbium. Physica, B + C, 139-14 . pp. 253-255. ISSN 0378-4363

Mohan, M and Divakar, C and Singh, AK (1991) Solidification of selenium melt under pressure up to 6.5 GPa. High Pressure Research, 6 . pp. 241-249.

Mukund, R and Narasimha, R and Viswanath, PR and Crouch, JD (2012) Multiple laminar-turbulent transition cycles around a swept leading edge. Experiments in Fluids, 53 . pp. 1915-1927. ISSN 0723-4864

Naidu, VPS (2010) Discrete cosine transform-based image fusion. Defence Science Journal, 60 (1). pp. 48-54.

Naidu, VPS (2010) Fusion architecture for 3D target tracking using IRST and radar measurements. Journal of Aerospace Sciences and Technology, 62 (3). pp. 183-195. ISSN 0972-950X

Naidu, VPS and Mukherjee, J (2012) Aircraft altitude estimation using un-calibrated onboard cameras. Journal of The Institution of Engineers (India): Series C, 93 (4). pp. 287-295. ISSN 2250-0553

Naidu, VPS and Raol, JR (2008) Pixel-level image fusion using wavelets and principal component analysis. Defence Science Journal, 58 (3). 338 -352. ISSN 0011-748X

Nair, Manoj T and Kumar, Naresh and Saxena, SK (2005) Computational Analysis of Inlet Aerodynamics for a Hypersonic Research Vehicle. Journal of Propulsion and Power, 21 (21). pp. 286-291.

Nair, RU and Madhumitha , J and Jha , RM (2013) Broadband em performance characteristics of single square loop FSS embededded monolithic radome. International Journal of Antennas and Propagation, 2013 . pp. 1-9.

Nair, RU and Shashidhara, S and Jha , RM (2012) Novel inhomogeneous planar layer radome design for airborne applications. IEEE Antennas and Wireless Propagation Letters, 11 . pp. 854-856. ISSN 1536-1225

Nair, Raveendranath U and Jha, RM (2007) Novel A-sandwich radome design for airborne applications. Electronics Letters, 43 (15). pp. 787-788.

Nanda, Manju and Jamadagni, CS (2012) Quantitative metrics for validating the effectiveness of the model based approach for indigenously developed SWS/AIC system. International Journal of Scientific & Engineering Research, 3 (12). pp. 1-7. ISSN 2229-5518

Narasimha, R (1992) A civil aircraft industry for India. Journal of Aeronautical Society of India, 44 (1). pp. 3-18.

Narasimhan, SV and Haripriya, AR and Kumar, B K Shreyamsha (2008) Improved wigner-ville distribution performance based on DCT/DFT harmonic wavelet transform and modified magnitude group delay. Signal Processing, 88 (1). pp. 1-27.

Narasimhan, SV and Harish, M (2006) Spectral estimation based on discrete cosine transform and13; modified group delay. Signal Processing, 86 . pp. 1586-1596.

Narasimhan, SV and Harish, M and Haripriya, AR and Basumallick, Nandini (2008) Discrete cosine harmonic wavelet transform and its application to signal compression and subband spectral estimation using modified group delay. Signal, Image and Video Processing . pp. 1-26.

Narasimhan, SV and Mallick, Nandini Basu and Chaitanya, Ratana (2008) Improved phase estimation based on complete bispectrum and modified group delay. Signal, Image and Video Processing .

Narayan, KS and Singh, AK and Ramasesha, SK (1997) High pressure effects and electronic transport in a ladder type polymer. Journal of Physics D: Applied Physics, 30 . L16-L18.

Narayan, Shiv and Joshi B, Shamala and Nair, RU and Jha , RM (2012) Electromagnetic performance analysis of novel multi-band metamaterial FSS for millimeter wave radome applications. Computers, Materials & Continua, 31 (1). pp. 1-16. ISSN 1546-2226

Narayan, Shiv and Nair, RU and Jha , RM (2013) Mode-matching generalised scattering matrix based electromagnetics performance analysis of thick frequency selective surfaces for airborne applications. Defence Science Journal, 63 (3). pp. 249-253. ISSN 0011-748X

Padmavathi, T and Naidu, SV and Rao, RMVGK (2012) Studies on mechanical behavior of surface modified sisal fibre - Epoxy composites. Journal of Reinforced Plastics and Composites, 31 (8). pp. 519-532. ISSN 0731-6844

Pandey, SC and Joseph, MA and Pradeep, MS and Raghavendra, K and Ranganath, VR and Venkateswarlu, K and Langdon, TG (2012) Theoretical and experimental evaluation of repetitive corrugation and straightening: Application to Al–Cu and Al–Cu–Sc alloys. Materials Science and Engineering A, 534 . pp. 282-287. ISSN 0921-5093

Patil, DC and Kori, SA and Venkateswarlu, K and Das, G and Alhajeri, SN and Langdon, TG (2012) Using ball indentation to determine the mechanical properties of an Al-7475 alloy processed by high-pressure torsion. Journal of Materials Science . pp. 1-7. ISSN 0022-2461

Pradeep, Shetty and Subrahmanya, MB and Kulkarni, DS and Rajani, BN (2013) CFD simulation of flow past MAV wings. International Journal of Aerospace Innovations, 5 (1). 19-28. ISSN 1757-2258

Prathap, Gangan and Naganarayana, BP (1990) Consistency force resultant distributions in displacement elements with varying sectional properties. International Journal for Numerical Methods in Engineering, 29 (4). pp. 775-783.

Premkumar, HB and Sunitha, DV and Nagabhushana, H and Sharma, SC and Nagabhushana, BM and Shivakumara, C and Rao, JL and Chakradhar, RPS (2012) Thermoluminescence, photoluminescence and EPR studies on Mn2+ activated yttrium aluminate (YAlO3) perovskite. Journal of Luminescence, 132 (9). pp. 2409-2415. ISSN 0022-2313

Premkumar, HB and Sunitha, DV and Singh, F and Nagabhushana, H and Sharma, SC and Nagabhushana, BM and Zhao, G and Cheng, J and Chakradhar, RPS (2012) Luminescence and defect studies of YAlO3:Dy3+, Sm3+ single crystals exposed to 100 MeV Si7+ ion beam. Journal of Luminescence, 132 (10). pp. 2679-2683. ISSN 0022-2313

Rajagopal, P and Vittala, NGV and Ramani, TS (1990) Aeroelastic analysis of a low aspect ratio wing. Journal of Aeronautical Society of India, 42 . pp. 51-56.

Rajani, BN and Kandasamy, A and Majumdar, Sekhar (2012) On the reliability of eddy viscosity based turbulence models in predicting turbulent flow past a circular cylinder using URANS approach. Journal of Applied Fluid Mechanics, 5 (11). pp. 67-79. ISSN 17353572

Rajinikanth, V and Venkateswarlu, K and Sen, Mani Kuntal and Das, M and Alhajeri, SN and Langdon, TG (2011) Influence of scandium on an Al–2% Si alloy processed by high-pressure torsion. Materials Science and Engineering , 528 . pp. 1702-1706.

Raju, BB and Chandra, R (1976) Some experiments on buckling of electroformed nickel shell specimens. Journal of Aeronautical Society of India, 28 . pp. 59-67.

Ramaiah, KV and Saikrishna, CN and Ranganath, VR and Buravalla, V and Bhaumik, SK (2011) Fracture of thermally activated NiTi shape memory alloy wires. Materials Science and Engineering A, 528 . pp. 5502-5510. ISSN 0921-5093

Ramamurthy, Rajeswari S and Dutt, HNV and Holla, VS and Swamy, MS (1994) Analysis of wings with multi-segmented flaps using a non-planar vortex lattice method. ZFW - Zeitschrift fuer Flugwissenschaften und Weltraumforschung., 18 (2). pp. 145-151. ISSN 0342-068X

Ramamurthy, Rajeswari S and Dutt, HNV and Holla, VS and Swamy, MS (1992) Analysis of wings with spanwise multi-segmented flaps. Journal of Aeronautical Society of India, 45 (2). pp. 143-151.

Ramamurthy, TV and Varambally, Sanath Kumar (1987) Software for bus monitor. Defence Science Journal, 37 (3). pp. 297-304.

Ramani, Geetha and Singh, AK (1979) Thermoelectric power of cerium up to 6GPa. Solid State Communications, 29 (8). pp. 583-584.

Ramasesha, SK and Singh, AK and Murugaraj, P (1991) Anisotropic thermoelectric power in YBa2Cu307-X single crystals under pressure up to 8 GPa. Physical Review, B43 . pp. 8620-8622.

Ramasesha, Sheela K and Rao, M V Radhika and Singh, AK and Umarji, AM (1996) Lowering of relaxor transition temperature in lead-based perovskites under pressure13;. Materials Research Bulletin, 31 (9).

Ramesh, V and Deshpande, M (2007) Unsteady flow computations for flow past multiple moving boundaries using LSKUM. Computers and Fluids, 36 (10). pp. 1592-1608.

Ratan, J and Jagadeesh, G (2012) Investigations on supersonic combustion in a combustion-driven shock tunnel. Proceedings of the Institution of Mechanical Engineers, Part G: Journal of Aerospace Engineering, 226 (9). pp. 1183-1191.

Ravichandran, KS (1992) Numerical experiments in I-D euler equations using higher order schemes. Journal of Aeronautical Society of India, 44 (3). pp. 233-243.

Ray, AK and Dwarakadasa, ES and Das, DK and Ranganath, VR (2007) Fatigue behavior of a thermal barrier coated superalloy at 800 degree C. Materials Science and Engineering: A, 448 (1-2). pp. 294-298.

Ray, AK and Roy, N and Dash, B and Das, DK and Ranganath, VR (2006) High temperature mechanical properties of thermal barrier coated superalloy applied to combustor liner of aero engines13;. High Temperature Materials and Processes, 25 (1-2). pp. 109-121.

Revathi, A and Rao, Sandhya and Kavitha, Rao V and Singh, MM and Sendil, Murugan M and Shylaja, Srihari and Dayananda, GN (2013) Effect of strain on the thermomechanical behavior of epoxy based shape memory polymers. Journal of Polymer Research, 20 (113). pp. 1-10. ISSN 1572-8935

Roy, Swapneel and Thanusha, MT and Rahul, BV and Khan, AA (2013) Effect of Shocks on Mixing and Thrust in Over-expanded Nozzles. Frontiers in Aerospace Engineering, 2 (2). pp. 136-142. ISSN 2325-6796

Sagdeo, A and Mondal, P and Upadhyay, A and Sinha, AK and Srivastava, AK and Gupta, SM and Chowdhury, P and Ganguli, T and Deb, SK (2013) Correlation of microstructural and physical properties in bulk BiFeO3 prepared by rapid liquid-phase sintering. Solid State Sciences, 18 . pp. 1-9. ISSN 1293-2558

Sahoo, B and Panda, PK (2012) Fabrication of Simple and Ring-Type Piezo Actuators and Their Characterization. Smart Materials Research . pp. 1-4.

Sankar, R and Jarandhan, S (1971) Making of wing models by tangent-milling. The Journal of Aeronautical Society of India, 23 (1). pp. 37-43.

Sathish, S and Geetha, M and UdayaKumar, A and Senthil Kumar, S (2012) Granulation of Nano Alumina Powder for Improved Flowability by Spray Drying. Transactions of the Indian Institute of Metals, 65 (5). pp. 485-490. ISSN 0019-493X

Satynarayana, KG and Rohatagi, PK and Vijayan, Kalyani and Pillai, CKS and Sukumaran, K and Pillai, SGK (1982) Structure property studies of fibres from various parts of the coconut tree. Journal of Material Science, 17 . pp. 2453-2462.

Sekhar, JA and Mohan, M and Divakar, C and Singh, AK (1984) Rapid solidification by application of high pressure. Scripta Materialia, 18 . pp. 1327-1330.

Sekhar, JA and Mohan, Murali and Divakar, C and Singh, AK (1984) Rapid solidification by application of high pressure. Materials Research Society Symposium Proceedings, 22 . pp. 77-80.

Sellarajan, B and Kulkarni, PD and Krishnan, M and Barshilia, Harish C and Chowdhury, P (2013) Magnetic properties of ordered bi-layer nanowire arrays with different Co crystallographic structures. Applied Physics Letters, 102 . 122401-1-122401-4. ISSN 0003-6951

Sengupta, TK and Kasliwala, A and De, S and Nair, M (2003) Temporal flow instability for Magnusx2013;Robins effect at high13; rotation rates. Journal of Fluids and Structures, 17 . pp. 941-953.

Sengupta, TK and Suman, VK and Bhumkar, YG (2012) Control of bypass transitional flow past an aerofoil by plasma actuation. International Journal of Emerging Multidisciplinary Fluid Sciences, 3 (2-3). pp. 117-134. ISSN 1756-8315

Senthilkumar, P and Dayananda, GN and Umapathy, M and Shankar, V (2012) Experimental Evaluation of a Shape Memory Alloy Wire Actuator with a Modulated Adaptive Controller For Position Control. Smart Materials and Structures, 21 (1). ISSN 0964-1726

Senthilkumar, P and Umapathy, M (2013) Use of load generated by SMA for its position control with neutral network estimator. Journal of Vibration and Control, 7 . pp. 1-12. ISSN 1077-5463

Shah, CG and Krishnamurthy, AV (1991) Analysis of edge delaminations in laminates through combined use of quasi-three-dimensional, eight-noded, two-noded and transition elements. Computers and Structures, 39 (3-4). pp. 231-242.

Shankar, PN (2007) Frequencies of gravity-capillary waves on highly curved interfaces with edge constraints. Fluid dynamics research, 39 (6). pp. 457-474. ISSN 0169-5983

Shankar, PN (1976) On the aerodynamic performance of a class of vertical shaft windmills. Proceedings of the Royal Society of London, 349 (1656). pp. 35-51.

Shankar, PN (2007) Three-dimensional flow in a cylinder with a stress-free sidewall. Fluid dynamics research, 39 (7). pp. 569-589.

Sharanappa, Sajjan V and Siva Kumar , K (2012) Reynolds-Averaged Navier-Stokes Computations over a Two-element Aerofoil. International Journal of Systems , Algorithms & Applications , 2 (Specia). pp. 38-42. ISSN ISSN Online: 2277-2677

Singh, AK (1989) Generation of pressure pulses by impacting an opposed-anvil setup with a low velocity projectile. Review of Scientific Instruments, 60 (2). pp. 253-257. ISSN 0034-6748

Singh, AK (1978) Measurement of thermoelectric power of solids up to 10 GPa. Review of Scientific Instruments, 49 . pp. 1324-1326.

Singh, AK (1970) Note on the greatest value of the Bijvoet ratio. Acta Crystallographica, A26 . pp. 381-382.

Singh, AK (1967) A correction to the visually estimated intensities for the spot-size variation in the upper level weissenberg photographs. Zeitschrift fxFC;r Kristallographie, 124 . pp. 378-383.

Singh, AK and Akahama, Y and Kawamura, H and Menendez-Proupin, E and Gutierrez, G (2005) Nonhydrostatic compression of bismuth to 222 GPa: Some constraints on elasticity of the bcc-phase. Journal of Physics and Chemistry of Solids, 67 (9-10). pp. 2192-2196.

Singh, AK and Balasingh, C (1973) Sample-curvature error in stress measurement made with an x-ray diffractometer. Journal of Applied Crystallography, 6 . pp. 466-471.

Singh, AK and Balasingh, C and Mao, HK and Hemley, RJ and Shu, J (1998) Interpretation of lattice strain under non-hydrostatic pressure. Review of High Pressure Science and Technology, 7 . pp. 205-210.

Singh, AK and Divakar, C and Mohan, M (1983) Step-loading technique for tungsten carbide opposed anvil13; high-pressure setup. Review of Scientific Instruments, 54 (10). pp. 1407-1409.

Singh, AK and Jayaraman, A (1979) Nonuniform line broadening in high-pressure x-ray diffraction patterns13;. High Temperatures - High Pressures, 11 . pp. 329-333.

Singh, AK and Kennedy, GC (1974) Compressibility of hexagonal selenium to 45 kbar. Journal of Physics and Chemistry of Solids, 35 (11). pp. 1545-1551.

Singh, AK and Kennedy, GC (1974) Compression of calcite to 40 kbar. Journal of Geophysics Research, 79 . pp. 2615-2622.

Singh, AK and Kennedy, GC (1976) Estimation of uniaxial stress component in NaCi samples compressed in a tungsten carbide anvil high-pressure x-ray apparatus. Journal of Applied Physics, 47 (7). pp. 3337-3340.

Singh, AK and Liermann, Hanns-Peter and Akahama, Y and Saxena, SK and Menendez-Proupin, Eduardo (2008) Strength of polycrystalline coarse-grained platinum to 330 GPa13; and of nanocrystalline platinum to 70 GPa from high-pressure13; x-ray diffraction data. Journal of Applied Physics, 103 (6).

Singh, AK and Mohan, Murali and Divakar, C (1982) The kinetics of pressure-induced a-w transformation in Ti13; 13; 13; 13;. Journal of Applied Physics, 53 . pp. 1221-1223.

Singh, AK and Ramaseshan, S (1968) Use of neutron anomalous scattering in crystal structure analysis.I. Non-centrosymmetric structures. Acta Crystallographica, B24 . pp. 35-39.

Singh, AK and Ramaseshan, S (1968) Use of neutron anomalous scattering in crystal-structure analysis.II. Centrosymmetric structures. Acta Crystallographica, B24 . pp. 1701-1702.

Singh, GK and Deodhare, Girish and Patel, Vijay V and Chetty, Shyam (2008) Automated process for optimal structural notch-filter design. Journal of Guidance Control and Dynamics, 31 (5). pp. 1504-1508. ISSN 0731-5090

Singh, Hema and Sneha, HL and Jha , RM (2013) Mutual coupling effect in phased arrays: A review. International Journal of Antennas and Propagation, 2013 . pp. 1-24. ISSN 1687-5877.

Singh, JP (1996) Evaluation of Jameson-Schmidt-Turkel dissipation scheme for hypersonic flow computations. Journal of Aircraft, 33 (2). pp. 286-290. ISSN 0021-8669

Singh, K and Balasubramanian, S and Amitha Rani, BE (2012) Computational and experimental studies of molecularly imprinted polymers for organochlorine pesticides heptachlor and DDT. Current Analytical Chemistry, 8 (4). pp. 562-568. ISSN 1875-6727

Singh, KL and Dattaguru, B and Ramamurthy, TS (2006) Numerically integrated MVCCI for fracture analysis on delaminated composite panels in compression. Mechanics of Advanced Materials and Structures, 13 (4). pp. 303-316.

Singh, Manish K and Dhanalakshmi, K and Chakrabartty, SK (2007) Navier-stokes analysis of airfoils with gurney flap. Journal of Aircraft, 44 (5). pp. 1487-1493.

Singh, Manish K and Dhanalakshmi, K and Mathur, JS (2011) Investigation of two dimensional flow past multi element airfoils for general transport aircraft. International Journal of Numerical Methods for Heat & Fluid Flow, 21 (8). 1026 -1049. ISSN 0961-5539

Singha, Sintu and Sinhamahapatra, KP (2011) Control of vortex shedding from a circular cylinder using imposed transverse magnetic field. International Journal of Numerical Methods for Heat & Fluid Flow, 21 (1). pp. 32-45. ISSN 0961-5539

Sinha, RP and Jarali, Chetan S and Raja, S (2011) Modelling the thermomechanical behaviour of shape memory polymer materials. Indian Journal of Engineering and Materials Sciences, 18 . pp. 15-23. ISSN 0971-4588

Siva Kumar , K and Sajjan, Sharanappa V (2013) Three-dimensional Unsteady Flow over a Heaving Rectangular Wing. Frontiers in Aerospace Engineering, Volume (Issue ). pp. 199-206. ISSN 2325-6796

Siva Kumar , K and Sharanappa, Sajjan V (2011) Unsteady Compressible Flow over Heaving Bodies Using an Implicit RANS Solver. Applied Mechanics and Materials, Vols. . pp. 4589-4597. ISSN ISSN: 1662-7482

Sivapragasam, M and Deshpande, MD and Sridhara, SN and Ramamurthy, S (2008) Numerical And Experimental Studies on an Aerodynamic Distortion Grill. Journal of Aerospace sciences and Technology, 60 (3). ISSN 1735-2134

Sivaprasad, S and Tarafder, S and Ranganath, VR and Tarafder, M and Ray, KK (2006) Corrosion fatigue crack growth behaviour of naval steels. Corrosion Science, 48 (8). pp. 1996-2013.

Sneha, HL and Singh, Hema and Jha , RM (2012) Mutual coupling effects for radar cross section (RCS) of a series-fed dipole antenna array. International journal of Antenna and Propagation, 2012 . pp. 1-21. ISSN 1687-5877

Sridhar, JK and Wulfft, G (1991) Application of multiple-input/single-output analysis13; procedures to flight test data. Journal of Guidance, Control and Dynamics, 14 (3). pp. 645-651.

Srilatha, KR and Dwarakanath, GS and Ramamoorthy, P (1990) Design of a natural laminar flow airfoil for a light aircraft. Journal of Aircraft, 27 . pp. 966-968.

Srinatha Sastry, CV and Raman, KS and Lakshman Babu, B (2001) Failure management scheme for use in a flush air data system. Aircraft Design, 4 (4). pp. 151-162.

Srivastava, Meenu and William Grips, VK and Rajam, KS (2010) Electrodeposition of Ni–Co composites containing nano-CeO2 and their structure, properties. Applied Surface Science, 257 (3). pp. 717-722. ISSN 0042-207X

Subramanya, HY and Viswanath, S and Narasimhan, R (2007) Influence of crack tip constraint on void growth in pressure sensitive plastic solids-1: 2D analysis. Engineering Fracture Mechanics, 75 . pp. 1045-1063.

Sujata, M and Madan, M and Raghavendra, K and Venkataswamy, MA and Bhaumik, SK Identification of failure mechanisms in nickel base superalloy turbine blades through microstructural study. Engineering Fracture Analysis , 17 . pp. 1436-1446. ISSN 1350-6307

Sujata, M and Madan, M and Raghavendra, K and Venkataswamy, MA and Bhaumik, SK (2010) Microstructural study: an aid to determination of failure mechanism in nickel base superalloy blades. Transactions of the Indian Institute of Metals, 63 (2-3). pp. 681-685. ISSN 0019-493X

Sundaramurthy, H and Narayan, KY and Suryanaraya, GK and Lochan, Rajeev and Sasidharan Nair, KG (1986) Wind tunnel investigation of strap-on booster separation13; characteristics of a launch vehicle. Journal of Aeronautical Society of India, 38 . pp. 215-221.

Sunder, R (1986) Fatigue crack propagation under spectrum loading. Journal of Aeronautical Society of India, 38 (3). pp. 153-160.

Sunder, R (1993) Notch root crack closure under cyclic inelasticity. Fatigue amp; Fracture of Engineering Materials and Structures, 16 (7). pp. 677-692. ISSN 8756-758X

SureshKumar, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of a stainless steel pipeline. Engineering Failure Analysis, 15 . pp. 497-504.

Suryanarayana, GK (2011) Effect of flare angle and natural ventilation on the aerodynamic characteristics of a typical re-entry body at subsonic and transonic mach numbers. Journal of Aerospace Sciences and Technology, 63 (4). pp. 1-7. ISSN 0972-950X

Takemura, K and Singh, AK (2006) High-pressure equation of state for Nb with a helium-pressure medium:Powder x-ray diffraction experiments. Physical Review B, 73 . pp. 224119-224128.

Tarafder, S and Sivaprasad, S and Ranganath, VR (2007) Comparative assessment of fatigue and fracture behaviour of cast and forged railway wheels. Fatigue amp; Fracture of Engineering Materials and Structures, 30 (9). pp. 863-876.

Tewari, Ashish and Brink-Spalink, JAN (1992) Multiple pole rational-function approximations for unsteady13; aerodynamics. Journal of Aircraft, 30 (3). pp. 426-428. ISSN 0021-8669

Upadhya, AR and Aruna, HM (1986) Analysis of axisymmetric laminated composite shells subjected to asymmetric loading. Journal of Aeronautical Society of India, 38 (3). pp. 93-103.

Upadhya, AR and Dayananda, GN and Kamalakannan, GM and Ramaswamy, Setty J and Daniel, J Christopher Autoclaves for Aerospace Applications: Issues and Challenges. International Journal of Aerospace Engineering .

Ushadevi, S and Singh, AK (1986) Estimation of the uniaxial stress component in a diamond anvil high pressure cell. Physica, 139-14 . pp. 922-924.

Vaitheeswaran, SM and Venkatanarayana, KG and Kanth, B Sashi (2010) Vector field guidance for path following of MAVs in three dimensions for variable altitude maneuvers. International Journal of Micro Air Vehicles, 2 (4). pp. 255-265. ISSN 1756-8293

Valluri, SR and Rajagopalan, SR (1983) Materials research at National Aeronautical Laboratory13; (Contributions of S Ramaseshan). Bulletin of Material Science, 5 (3 amp;). pp. 373-380.

Venkatakrishnan, L and Karthikeyan, N and Mejia, K (2012) Experimental Studies on a Rudimentary Four-Wheel Landing Gear. AIAA Journal, 50 (11). pp. 2435-2447. ISSN 0001-1452

Venkatakrishnan, L and Krothapalli, A (2006) Forward flight effects on fan noise from supersonic 2-D inlets. Journal of Aircraft, 43 (5). pp. 1549-1552. ISSN 0021-8669

Venkatakrishnan, L and Wiley, Alex and Kumar, Rajan and Alvi, Farukh (2011) Density field measurements of a supersonic impinging jet with microjet control (AIAA -53420-753). AIAA Journal, 49 (2). pp. 432-438. ISSN 0001-1452

Vepa, R (1979) Comment on 'active flutter control using generalized unsteady13; aerodynamic theory'. Journal of Guidance and Control, 2 . pp. 446-447.

Verma, SB and Haidn, Oskar (2010) Flow characteristics of overexpanded rocket nozzles. International Journal of Aerospace Innovations, 2 (4). pp. 259-277. ISSN 1757-2258

Verma, SB and Manisankar, C (2012) Shockwave/boundary-layer interaction control on a compression ramp using steady microjet. AIAA Journal, 50 (12). pp. 2753-2764. ISSN 0001-1452

Verma, SB and Manisankar, C and Channa Raju, - (2012) Control of shock unsteadiness in shock boundary-layer interaction on a compression corner using mechanical vortex generators. Shock Waves, 22 . pp. 327-339.

Verma, SB and Stark, R and Genin, C and Haidn, O (2011) Cold gas dual-bell tests in high-altitude simulation chamber. Shock Waves, 21 . pp. 131-140.

Verma, SB and Stark, R and Haidn, O (2012) Gas Density Effects on Dual-Bell Transition Behavior. Journal of Propulsion and Power, 28 (6). pp. 1315-1323. ISSN 0748-4658

Verma, SB and Stark, R and Nuerenberger-Genin, C and Hakin, O (2010) Cold-gas experiments to study the flow separation characteristics of a dual-bell nozzle during its transition modes. Shock Waves, 20 . pp. 191-203.

Verma, SB and Viji, M (2011) Freestream effects on base pressure development of an annular plug nozzle. Shock Waves, 21 (2). pp. 163-171.

Vijayan, Kalyani (2002) Women in Aerospace in India: Aerowoman. Current Science, 82 (3). pp. 254-255.

Viswanath, PR Drag reduction of afterbodies by controlled separated flows. AIAA Journal, 39 (1). pp. 73-78. ISSN 0001-1452

Viswanath, PR (1996) Flow management techniques for base and after body drag reduction13;. Progress in Aerospace Sciences, 32 (2-3). pp. 79-129.

Viswanath, PR and Mukund, R and Narasimha, R and Crouch, JD (2006) Relaminarization on swept leading edges under high-lift conditions. AIAA Journal, 44 (11). pp. 2621-2629. ISSN 0001-1452

Viswanath, PR and Patil, SR (1990) Effectiveness of passive devices for axisymmetric base drag13; reduction at mach 2. Journal of Spacecraft and Rockets, 27 (3). pp. 234-237.

Proj.Doc/Technical Report

Balasubramaniyam, Thiruveni and Choudhury, Balamati and Jha, RM (2012) Metamaterial Invisibility Cloaks: A Review. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Anon, - (1986) Technical specification of shut-off valve. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Anupana, RC (1992) Pitop Static System. Technical Report. NAL, Bangalore.

Arun Kumar, KN and Ranjan, M (1998) Noise modelling for New Bangalore Airport. Project Report. National Aerospace Laboratories, Bangalore, India.

Aruna, HM and Guruprasad, K and Murthy, MVV and Chandra, Ramesh (1986) Finite element analysis of MiG-21 rudder. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Ashok, G and Karthik, K and Sathish, BG and Rohidekar, R Satish (1991) Nalla 1 : Data report-Part I. Technical Report. National Aerospace Laboratories, Bangalore, India.

Aslam, Mohamed (1987) NAL TECH: Profile of NAL spin-off technologies. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Balasingh, C and Singh, AK (1971) The variance as a criterion for defocusing in powder diffractometry. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Bera, Rajendra K (1976) On simulation and evaluation of aircraft handling qualities. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Bera, Rajendra K (1987) A Quadrature formula for a double-pole singular integral. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Bhaskaran, TA and Parameswara, MA and Venkataswamy, MA and Sujata, M and Keshab, Barai and Bhaumik, SK (2003) Analysis of failed engine mount of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Bhaskaran, TA and Venkataswamy, MA and Parameswara, MA and Sujata, M and Keshab, Barai and Bhaumik, SK (2003) Analysis of components retrieved from the wreckage of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Bhaskaran, TA and Venkataswamy, MA and Parameswara, MA and Sujata, M and Keshab, Barai and Bhaumik, SK (2003) Analysis of failed hold down bolt of fans of an air cooler. Project Report. National Aerospace Laboratories, Bangalore.

Bhaskaran, TA and Venkataswamy, MA and Parameswara, MA and Sujata, M and Keshab, Barai and Bhaumik, SK (2003) Analysis of failed motor shaft of an air cooler. Project Report. National Aerospace Laboratories, Bangalore.

Bhaskaran, TA and Venkataswamy, MA and Parameswara, MA and Sujata, M and Keshab, Barai and Bhaumik, SK (2003) Failure analysis of crude heater tube support hangar. Project Report. National Aerospace Laboratories, Bangalore.

Bhaskaran, TA and Venkataswamy, MA and Parameswara, MA and Sujata, M and Keshab, Barai and Bhaumik, SK (2003) Investigation of clusters from body structures of a particular type of helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Bhaskaran, TA and Venkataswamy, MA and Sujata, M and Keshab, Barai and Bhaumik, SK (2003) Analysis of cracked main gear box housings of helicopters. Project Report. National Aerospace Laboratories, Bangalore.

Bhaskaran, TA and Venkataswamy, MA and Sujata, M and Keshab, Barai and Bhaumik, SK (2003) Analysis of failed engine fitted on an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Bhaskaran, TA and Venkataswamy, MA and Sujata, M and Keshab, Barai and Bhaumik, SK (2003) Failure analysis of 1st stage compressor rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Bhat, GS and Narasimha, R and Wiggins, S (1989) Studies of an impressionistic dynamical model that mimics open flow turbulence, Part 1. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Bhaumik, SK (2003) Analysis of Failed Pinion Shaft. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2003) Analysis of Labyrinth rings and pins of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2003) Analysis of components from the crashed aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2004) Analysis of components retrieved from the wreckage of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2004) Analysis of cracked gimbal joint. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2004) Analysis of debris collected from the yoke assembly installed on an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2004) Analysis of debris in the SPROB plant. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2003) Analysis of failed 1109 HT shift vessel inlet line pressure gauge tapping. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2003) Analysis of failed K-95 horn diaphragm. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2003) Analysis of failed MGB II stage pinions of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2004) Analysis of failed bonded seal of main undercarriage jack of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2004) Analysis of failed hose assembly of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2003) Analysis of fractured torque link and dowel pins of main undercarriage of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2003) Analysis of fractured torsion link of nose shock strut of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2004) Analysis of wreckage of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2003) Comments on the formation of adiabatic shear bands in MGB planet pinions of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2007) Comments on the report submitted by Rolls-Royce on “Pegasus Mk. 151-32 HPT blade cracking. Project Report. National Aerospace Laboratories, Bangalore, India.

Bhaumik, SK (2004) Failure analysis of compressor first stage rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2003) Metallurgical examination of damaged parts of an engine of crashed aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK (2004) Metallurgical examination of failed turbine rotor and stator blades fitted on an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK and Bhaskaran, TA and Venkataswamy, MA and Parameswara, MA and Sujata, M (2003) Analysis of compressor blades and turbine blades of an engine retrieved from a crashed aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK and Bhaskaran, TA and Venkataswamy, MA and Parameswara, MA and Sujata, M (2003) Analysis of damaged parts of an aeroengine involved in CAT-I accident. Project Report. National Aerospace Laboratories, Bangalore.

Bhaumik, SK and Raghuram, AC and Krishnan, RV (2004) Failure analysis of LPTR disc in 3000 HP cyclic spin test facility. Project Report. National Aerospace Laboratories, Bangalore.

Bisoyi, Sanjana and Choudhury, Balamati and Jha, RM (2012) Soft Computing Techniques for Metamaterial: A Cross-indexed Bibliography (2003-2012). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Bisoyi, Sanjana and Choudhury, Balamati and Jha, RM (2012) A Cross-indexed Bibliography for Invisibility Cloak (2003-2012). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

CTFD, - (1993) CFD - Advances and applications (Part 1). Technical Report. National Aerospace Laboratories, Bangalore, India.

Chakrabartty, SK (1989) Computation of transonic potential flow RAE-wing-A and body-B2 combination. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Chakrabartty, SK and Subramanian, NR (1986) Computation of 3-D transonic flows for wings and wing body configuration, annual progress report. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Chandran, AP and Kanakamuthu, - and De, Manabendra M and Ashoka, BS and Dayananda, GN (2011) Procedure for commissioning and operation of the NMITLI 500kW Wind turbine system. Technical Report. National Aerospace Laboratories, Bangalore, India.

Chandrappa, BK and Krishnamurthy, SJ and Krishnamoorthy, V and Murthy, MVA and Murugesan, K and Pai, BR and Ramachandra, MS and Ramamurthy, S and Swamy, KMM and Shembharkar, TR and Soundranayagam, S (1992) Aerodynamic and Heat Transfer Studies of HPT Rotor and Stator Blades of GTX-35-VS Engine. Project Report. NAL, NAL Bangalore.

Chandrasekharappa, G and Balasubramaniam, R (1991) Estimation techniques of random vibration levels for missile structures: A critical evaluation. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Chokkalingam, RVM (1989) Press relations of R amp; D laboratory. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Choudhury, Balamati and Divya, AP and Singh, Hema and Jha, RM (2009) A Review of RF Simulation of Electromagnetic Environment inside a Large Passenger Aircraft Cabin. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Choudhury, Balamati and Jha, RM (2010) Refined Ray Propagation Modeling inside a Closed Elliptic Cabin with Floorboard and Windows for Aircraft Applications: Software User Manual. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Choudhury, Balamati and Jha, RM (2010) Ray Path Propagation Modeling inside an Elliptic Cylinder for Aircraft Fuselage Applications: Software User Manual. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Choudhury, Balamati and Jha, RM (2010) Refined Ray Propagation inside a Closed Elliptic Cabin for Aircraft Fuselage Applications: Software User Manual. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Choudhury, Balamati and Patnaik, Digbala and Jha, RM (2010) Boeing Ray Tracing Project: Spatially Uniform Ray Launching for an Isotropic Source. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Choudhury, Balamati and Raghavendra, BJ and Jha, RM (2011) Surface Modeling of Aircraft Passenger Seats using Boeing AGPS Seat Arrangement Mapping for Boeing 787-9. Project Report. CSIR-NAL, Banaglore, National Aerospace Laboratories.

Choudhury, Balamati and Thithiksha , T and Jha , RM (2011) Ray Propagation inside Aircraft Cabin for Multiple Sources and Receivers: Application towards WELS. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Choudhury , Balamati and Jha, RM (2010) MATLAB and Boeing AGPS Generated Quadric Patches and Hybrids for Aircraft Fuselage Applications: Software User Manual. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Dash, PK (1986) Effect of a strengthening patch on safe life of an aircraft in a fleet. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Dash, Silajeet and Priyesh, K and Singh, Hema and Jha, RM (2010) Boeing EM Simulation Project: RF Simulation inside a Lossy Elliptic Cabin with Floorboard. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Dash, Silajeet and Shwetha, VP and Singh, Hema and Jha, RM (2010) Boeing EM Simulation Project: RF Field Computations inside a Lossy Elliptic Cabin with Floorboard and Windows. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Dash, Silajeet and Singh, Hema and Jha, RM (2010) Boeing EM Simulation Project: RF Simulation inside a Completely Empty Elliptic Cabin Shell. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

De, Manabendra M and Ashoka, BS and Seenappa, - and Chandra, AP and Kanakamuthu, - (2011) Preliminary studies of the Aero-generator for battery charging application. Technical Report. National Aerospace Laboratories, Bangalore, India.

De, Manabendra M and Kanakamuthu, and Isaac, JJ (2011) Aerodynamic design & analysis of the Innovative Tip Brake of the NMITLI 500 kW Horizontal-Axis Wind Turbine. Technical Report. National Aerospace Laboratories, Bangalore, India.

Desai, SS and Pai, BR and Prathap, Gangan and Ramamoorthy, P (1985) Aerospace applications of computers. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Deshpande, MD (1998) Decay of an axisymmetric vortex with swirl. Technical Report. National Aerospace Laboratories, Bangalore, India.

Deshpande, MD (2003) Free convection in a three-dimensional cavity. Technical Report. National Aerospace Laboratories, Bangalore, India.

Deshpande, MD (2003) Natural convection in a cubical cavity: Case of multiple solutions. Technical Report. National Aerospace Laboratories, Bangalore, India.

Deshpande, MD (1999) Study of a viscous spherical vortex. Technical Report. National Aerospace Laboratories, Bangalore, India.

Deshpande, MD and Sharma, Gaurav (1999) Flow intensification in the solution of 3-dimensional euler equations. Technical Report. National Aerospace Laboratories, Bangalore, India.

Deshpande, MD and Srinidhi, BG (2005) Bifurcation, period dubling and hysteresis in mixed convection in a cavity. Technical Report. National Aerospace Laboratories, Bangalore, India.

Deshpande, MD and Srinidhi, BG (2005) Flow in the driven cubical cavity: Generation of data for low Reynolds numbers. Technical Report. National Aerospace Laboratories, Bangalore, India.

Deshpande, MD and Srinidhi, BG (2005) Mixed convection in a generation of periodic and unsteady13; convection.13;. Technical Report. National Aerospace Laboratories, Bangalore, India.

Desikan, KS (1991) Acoustic Duct Design For Attenuation Of Flow Unsteadiness In NAL 1 .2m Tunnel. Technical Report. NAL, Bangalore.

Devi, Bharathi B (1977) Maximization of system reliability by accelerated random search algorithm. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Dhanalakshmi, K and Mathur, JS and Chakrabartty, SK (2003) Radomes for JAGUAR aircraft: Closure Report. Technical Report. National Aerospace Laboratories, Bangalore.

Divya, AP and Choudhury, Balamati and Jha, RM (2008) Boeing Aircraft In-Cabin EM Simulation Project (CEM Development): 2-Dim Generic Ray-Tracing Studies. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Divya, AP and Choudhury, Balamati and Singh, Hema and Jha, RM (2009) Boeing Aircraft In-cabin EM Simulation Project: Conceptual Comparison between Image Method and Ray Tracing Method. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Divya, AP and Jha, RM (2009) Boeing Aircraft In-cabin EM Simulation Project: A Preliminary Study of NURBS. Project Report. CSIR-NAL, Bangalore. (Submitted)

Divya, AP and Singh, Hema and Choudhury, Balamati and Jha, RM (2009) A Review of Ray Path Procedures for Application to Aircraft In-Cabin Propagation. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Dutt, HNV and Seshadri, SN (1991) Data Base Management And Analysis System For Wind Tunnel Results (Version-Ii,). Technical Report. NAL, Bangalore.

Dutta, Soma (2007) Design, modeling and analysis for optimum actuation in Piezoelectric Micro Cantilever. Project Report. National Aerospace Laboratories, Bangalore, India.

Dutta, Soma and Raja, S and Rajappa, S and Medar, MH Modelling and Analysis of MEMS Thermal Actuator. Project Report. National Aerospace Laboratories, Bangalore, India.

Dutta, Soma and Shubha, V (2009) MEMS: An Overview. Project Report. National Aerospace Laboratories, Bangalore, India.

Dutta, Soma and Shubha, V and Ramesh, TG and Gopalakrishnan, PS (2009) Thermoelectric Cooler. Project Report. National Aerospace Laboratories, Bangalore, India.

Dutta, Vimala (1988) Implicit boundary condition procedure - Application to 1-D euler solver. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Fox, L and Sankar, R (1970) generalised regula falsi. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Gallus, HE and Ramamurthy, S (1980) Closed Circuit Test Facility for Testing supersonic Axial compressors. Project Report. Aachen Techincal University.

Girija, G and Renukadevi, M and Ganesh, VS and Balasubramanyam, TS and Nagabhushana, S (1979) A hybrid correlator for studying helicopter rotor vibrations. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Girija, G and Saraswathi, L and Raol, JR (1994) Estimation Of Stability And Control Derivatives Of A Helicopter From Flight Data - Preliminary Results. Technical Report. NAL, Bangalore.

Godha, GN and Bhogle, Srinivas and Menon, Shailaja (2001) Quiz module for NAL's intranet and proposed aviation portal. Technical Report. National Aerospace Laboratories, Bangalore, India.

Gopalratnam, Girija and Jategaonkar, RV (1991) Some results of ATTAS flight data analysis using maximum likelihood parameter estimation method. Technical Report. National Aerospace Laboratories, Bangalore, India.

Gopalratnam, Girija and Jategaonkar, Ravindra (1991) Some results of ATTAS flight data analysis using maximum likelihood parameter estimation method. Technical Report. National Aerospace Laboratories, Bangalore, India.

Gopinath, N and Seshadri, SN and Dutt, HNV and Sampath, Rao B (1991) Wind Tunnel Tests On 1/20 Scale 6.45v35 Configuration Part I: Longitudinal Characteristics. Technical Report. NAL, Bangalore.

Gopinath, R (1991) A comparison of inviscid flow past airfoils by the full potential and euler codes. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Gopinath, R and Murthy, AV (1974) Numerical solutions of the compressible, laminar boundary layers with pressure gradients at large pfandtl numbers. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Gopinath, R and Murthy, AV (1969) Study of the effect of pressure gradient on compressible laminar large boundary layers at large prandtl numbers. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Gopinath, R and Subramanian, NR (1970) Study of the asymptotic behaviour of compressible laminar boundary layers of a dissociating gas. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Gouramma, Hiremath and Choudhury, Balamati and Jha, RM (2012) Effect of shaping parameter of single and double-curvatured concave surfaces in geometric ray tracing. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Govindarajan, Rama (1992) A literature survey on laminar separation bubbles. Technical Report. National Aerospace Laboratories, Bangalore, India.

Guruprasad, R (2004) Saga of Saras: Part - I. Technical Report. National Aerospace Laboratories, Bangalore, India.

Head, - (1963) 4ftx4ft Trisonic wind tunnel. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Isaac, JJ (1975) On the effects of jets on flame stability. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Ismail, Shaik and Chetty, Shyam (1991) Longitudinal equivalent system for augmented aircraft using modal decomposition/balanced reduction technique. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Ismail, Shaik and Parameswaran, V and Shyam, Chetty (1998) Handling Qualities Analysis of Flight Test Data of13; Fighter Trainer Aircraft MiG 21 Type 69b U-2153 Using HQPACK. Technical Report. National Aerospace Laboratories, Bangalore, India.

Jatinder, Singh and Basappa, (2010) Flight Data analysis and Parameter Estimation of TEJAS Naval Variant. Project Report. NAL, Bangalore.

Jha, RM (1995) Indigenous EM Design of Broadband (7-18 GHz) Airborne Radomes. Project Report. CSIR-NAL, Bangalore.

Jha, RM and Vinoy, KJ and Pavithran, S and Sundaram, R and Madhava, MR (1997) Indigenisation of Broadband (7-17 GHz) Airborne Detection (ABD 2000) Radome - Status Report: 3. Project Report. CSIR-NAL, Bangalore.

Jha, RM and Vinoy, KJ and Pavithran, S and Sundaram, R and Madhava, MR and Rao, M Subba (1997) Indigenisation of Broadband (7-17 GHz) Airborne Detection (ABD 2000) Radome - Status Report: 2. Project Report. CSIR-NAL, Bangalore.

Joshi B, Shamala and Narayan, Shiv and Jha, RM (2012) EM Analysis of Dual-band Metamaterial FSS for Millimeter Wave Applications. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Joshi B, Shamala and Narayan, Shiv and Nair, RU and Jha, RM (2012) A Review of the Techniques for EM Analysis of Conformal FSS Structures. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Kanagarajan, V and Hartmann, K (1989) Force Measurements At Low Spefeds On . Body Wing Tail Combinations (Kaha Model) At High Reynolds Numbers And Incidences From -2° To 70°. Technical Report. NAL, Bangalore.

Kanakamuthu, and Chandra, AP and Ashoka, BS and Majhi, Samay and Jayaraman, M and Kumar, VS and Seenappa, and De, Manabendra M and Manjunath, MR and Isaac, JJ (2011) Field trials of the NMITLI 500 kW Horizontal-Axis Wind Turbine System. Technical Report. National Aerospace Laboratories, Bangalore, India.

Kanakamuthu, - and Rajeev, KT and Chandra, AP and De, Manabendra M (2011) Aerodynamic design of the 500 W wind turbine rotor/blade. Technical Report. National Aerospace Laboratories, Bangalore, India.

Kannan, CR and Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of cracked NLG brackets. Project Report. National Aerospace Laboratories, Bangalore, India.

Kodanda, B and Pai, BR (2003) History of Powered Flight. Project Report. CSIR-NAL, Bangalore.

Krishnamurthy, K (1989) Tests On The Ejection Seat With Different Shock Wave Generating Devices In 0.3m Transonic Wind Tunnel. Technical Report. NAL, Bangalore.

Krishnamurthy, K (1989) Tests On Various Nose Configurations With Cylindrical After body In 0.3m Wind Tunnel. Technical Report. NAL, Bangalore.

Krishnamurthy, K (1989) Wind Tunnel Tests on Projectile Models in 0 .3M Trisonic Wind Tunnel. Technical Report. NAL, Bangalore.

Krishnamurthy, M and Panda, GK (2000) Equilibrium Shapes Of Tether With An Aerostat. Technical Report. NAL, Bangalore.

Krishnamurthy, M and Venugopal, S (1991) A Correlation Study of The Wing-Body Interference Factor for High Angles. Technical Report. NAL, Bangalore.

Krishnamurthy, SJ and Srilatha, KR (2009) DEVELOPMENT AND VALIDATION OF DESIGN METHODOLOGIES AND DESIGN TOOLS TO ENABLE WIND TURBINE ROTOR/BLADES TO BE OPTIMIZED FOR LOW AND MODERATE WIND REGIMES: PART-I BASELINE DESIGN AND ANALYSIS OF WIND TURBINE ROTOR. Project Report. National Aerospace Laboratories.

Krishnan, V and Mathur, NB and Yajnik, KS (1986) Base Flow Facility Progress Report For 1985-86. Technical Report. NAL, Bangalore.

Krishnan, V and Mathur, NB and Yajnik, KS (1986) Base Flow Facility Progress Report For 1985-86. Technical Report. NAL, Bangalore.

Kulkarni, KD and Mahendran, N and Majumdar, Sekhar (2005) Laminar mixed convective heat and transfer in a bottom heated ltd driven square cavity. Technical Report. National Aerospace Laboratories, Bangalore, India.

Kumar, D Vijaya and Jha, RM (1996) EM Design of Monolithic & Sandwich Nose Cone Radomes for LTA SARAS-Duet Aircraft. Project Report. CSIR-NAL, Bangalore.

Kumar, K. Mohan and Srikanth, L and Surendra, C and Rahul Kumar, C and Rao, RMVGK (2007) Metallisation of CFRP components for SATCOM applications (ISRO-SAC). Technical Report. National Aerospace Laboratories, Bangalore, India.

Kumar, M Praveen and Vinoy, KJ and Jha, RM (1994) Indexed Data Base of Radome (1960-1993). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Lamba, D and Sunder, R (1985) Servohydraulic load frame and accessories for mechanical testing. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Madan, M and Bhaumik, SK and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of TGB control lever. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhaumik, SK and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of delivery valve screw – hydraulic pump of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Bhaumik, SK (2011) Hardness survey and microstructural study of samples belonging to collector pinions of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Bhaumik, SK (2008) Investigation of failed pinions of passenger hoist. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Analysis of 1st stage blade of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Analysis of components of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Analysis of cracked tube (slithering handle) of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of damages on the compressor blades of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of deposits collected from the main fuel pump of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of deposits collected from the pipelines and ECS shut-off valve of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of failed collector pinions of a Helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2009) Analysis of fractured eyering shaft of ramp side attachment fitting of cargo door assembly belonging to an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Analysis of the damaged I stage compressor blade of an aero engine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Analysis of the damaged I stage compressor rotor blade an aero engine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2009) Failure analysis of 2nd stage LP compressor rotor blades of aeroengines. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of AP pipeline of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2009) Failure analysis of TDS assembly segment lamination of A helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of aft stiffeners of the rear pressure bulkhead of the STS-fuselage. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of assembly drain pipe installed in an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of boiler steam drum material. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of bottom plate of rear torsion box of an aircraft STS fuselage. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of burst pipe of oxygen charging trolley. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2009) Failure analysis of burst pressure gauge of oxygen charging trolley of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of components belonging to a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of components retrieved from the wreckage of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of damaged main gear leg left of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of damaged panel of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of deep groove ball bearing. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2009) Failure analysis of engine attachment support and hydraulic reservoir guard of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of exhaust valve. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of first stage compressor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2009) Failure analysis of flare tip. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of gusset plates of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of low-pressure turbine rotor blade of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of low-pressure turbine rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of lower toggle of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2009) Failure analysis of main rotor blade fork bolt (big) of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2009) Failure analysis of main undercarriage fitting of Main landing gear of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2009) Failure analysis of pipe fastener (RH) of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of port main wheel “drive side half hub” of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of structural components of a a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2009) Failure analysis of ventral fin axle of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2009) Failure analysis of wheel hub of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2009) Failure investigation of 5th stage compressor rotor blade pertaining to an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Bhuvana, R and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2009) Investigation of failed components of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Mallanna, S and Sujata, M (2011) Analysis of welded samples from AP-pipeline. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Raghavendra, K and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of compressor and gas generator blades belonging to an engine of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Raghavendra, K and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2007) Failure investigation of HPTR blades of aeroengines. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Raghavendra, K and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Microstructural study on HPTR blades of aeroengines. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Bhaumik, SK (2011) Analysis of engine oil debris. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Bhaumik, SK (2011) Analysis of fractured bearings of wheel hub of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of O-rings. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of centre perspex panel of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of nose wheel hub of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of propeller reduction gear shaft of indigenous rotary engine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of suspension device fitted with antenna of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Bhaumik, SK (2011) Failure analysis of ‘O’ ring belonging to an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Bhaumik, SK (2011) Metallurgical analysis of Sponson bush of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Bhaumik, SK Metallurgical failure analysis of gears of accessory gearbox of an aero-engine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Analysis of components of aeroengine retrieved from the wreckage of an Aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Analysis of debris collected from the main oil filter of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Analysis of failed skin bottom of nose belly panel of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of LH top root fitting of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of compressor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of pipe assembly of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Raghavendra, K and Bhaumik, SK (2011) Microstructural study of turbine blades material of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure Analysis of Bearings and Gears of Accessory Gearbox of an Aero-engine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure Analysis of Rotor Blades of Steam Turbine Generator of a captive power plant. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of IC engine valve. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of a sheared 2” steam injection pipe of a vacuum heater. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of an engine fan and compressor blades. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of arch section tube in fired boiler of a captive power plant. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of high pressure flange in a reactor outlet. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of nose wheel assembly of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of undercarriage extension/retraction jack components of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Raghavendra, K and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of fractured HPTR blade of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Ranganath, VR and Bhaumik, SK (2011) Failure analysis of damaged pressure gauge/hose of an aircraft oxygen trolley. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Analysis of broken pin assembly an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Analysis of spalled collector pinion of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Analysis on the spalling of collector pinion of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of Banner Target Towing (BTT) Cables. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of Torque plate of an aircraft brake unit. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of an aeroengine components. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of control linkage and bolt recovered from the wreckage of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of first stage compressor rotor blades of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2009) Failure analysis of vacuum column trays. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of wheel nut of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure investigation of main fitting subassembly of main landing gear of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Venkataswamy, MA and Kannan, D and Bhaumik, SK (2011) Analysis of parts retrieved from the wreckage of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of outer flap of TVC heat shield. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of tail under carriage strut of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Sujata, M and Venkataswamy, MA and Raghavendra, K and Gore, P and Bhaumik, SK (2011) Failure analysis of cracked steam drum of boiler of captive power plant. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Analysis of components from the wreckage of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Analysis of deposits from the compressor of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of MDS and FW assembly Nadella pin Pt. No: 2 X 15.8 BRV. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of fixed door assembly of nose landing gear jack of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of steam turbine moving blades. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Failure investigation of components of a crashed aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Analysis of a failed chain link. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Analysis of failed compressor stator blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Analysis of failed lubricating oil pipeline used on AMAGB of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of collector pinion of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of collector pinion of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of compressor stator and rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2004) Failure analysis of compressor stator blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of middle drum of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of steam turbine blade. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of steam turbine blade. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of steam turbine blade. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Fracture analysis of broken plunger of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Bhaumik, SK (2011) Metallurgical analysis of components of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Venkataswamy, MA and Parameswara, MA and Sujata, M and Bhaumik, SK (2005) Failure analysis of TGB housings of helicopters. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Sujata, M and Banerjee, A and Biswas, A and Bhaumik, SK (2007) Failure analysis of oxygen hose of the lance equipment in LD shop # 2. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Analysis of Al-alloy billets of specification AMS4101 2124 T851. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Analysis of compressor stage I rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of MGB I stage pinions of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2005) Failure analysis of P301 Benfield section centrifugal pump shaft. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2005) Failure analysis of P302 Benfield section centrifugal pump shaft. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of Plunger. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2005) Failure analysis of TGB housing of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2005) Failure analysis of TGB housing of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2005) Failure analysis of bolts belonging to an aircraft engine removal ground equipment. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2005) Failure analysis of bolts belonging to an aircraft engine removal ground equipment. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of brace bolt. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Failure analysis of broken M2 screw of a brake parachute actuator. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of collector gear of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Failure analysis of components of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Failure analysis of compressor rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of cyclic-stick of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of fasteners used in pressure safety index valve. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Failure analysis of main landing gear axle of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2005) Investigation of HPT vane of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2005) Investigation of HPT vane of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2005) Metallurgical examination of airfoil of I stage compressor rotor blades. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Sujata, M and Biswas, Swati and Ganeshachar, MD and Bhaumik, SK (2007) Failure analysis of fatigue tested LPT rotor blades failed from root region. Project Report. National Aerospace Laboratories, Bangalore, India.

Madan, M and Venkataswamy, MA and Sujata, M and Suresh Kumar, M and Bhaumik, SK (2006) Analysis of failed compressor blades from an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Sujata, M and Suresh Kumar, M and Bhaumik, SK (2006) Failure analysis of Ist stage compressor rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Sujata, M and Suresh Kumar, M and Bhaumik, SK (2006) Failure analysis of front shield assembly rivets of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Madan, M and Venkataswamy, MA and Sujata, M and Suresh Kumar, M and Bhaumik, SK (2006) Investigation of failed oxygen charging valve of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Madan , M and Sujata, M and Bhaumik, SK (2011) Analysis of cracked 5" tube of vacuum heater. Project Report. National Aerospace Laboratories, Bangalore, India.

Madhava Rao, C and Raj Mahindra, - and Nagaraja Rao, TG (1991) Light transport aircraft: cost estimates, finances and operational cost - a review and update. Project Report. National Aerospace Laboratories, Bangalore.

Madhumitha, J and Nair, RU and Jha, RM (2007) Insertion Phase Delay and Boresight Error Characteristics of Hybrid Shaped Airborne Radome. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Madhumitha , J and Nair, RU and Jha, RM (2010) Novel Application of Metallic Strip Gratings for Broadbanding of Multilayered Radome Panels. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Madhusudhan, BS and Prathap, Gangan (1990) Comparative study of the performance of the field and edge-consistent QUAD4 and COSMOS/M SHELL4T element. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Mallikarjuna, HV (1990) Testing Of Indigenous Flying Helmet In 1 .2m Wind Tunnel. Technical Report. NAL, Bangalore.

Mallikarjuna, HV (1990) Testing Of Integrated Helmet In Open Jet Facility. Technical Report. NAL, Bangalore.

Mathur, JS and Weatherill, NP (1991) The numerical simulation of invisid compressible aeronautical flows. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Mathur, NB (1990) After body Pressure Drag Data For The Reheat, Intermediate And Dry Nozzle Operating Conditions Of The LCA-GTX 35vs Configuration. Technical Report. NAL, Bangalore.

Mathur, NB and Rajeev, Kumar (2004) Experimental Studies on 1/15th Scale SARAS Afterbody Model with Underside Fuselage Fairing, Ventral Fins, Nacelles and Stub Main Wing. Technical Report. National Aerospace Laboratories, Bangalore, India.

Milton, SG and Deshpande, MD (1996) Study of sensitivity of numerically simulated turbulent flow field to initial conditions. Technical Report. National Aerospace Laboratories, Bangalore, India.

Mohan, KH (1990) Diesel Engine Compressor System (Closing Report). Technical Report. NAL, Bangalore.

Mohan, KH (1990) Procurement Of Machineries For Wind .Tunnel Model Fabrication And Inspection (Project Closure Report. Technical Report. NAL, Bangalore.

Mohan, Kumar and Rao, RMVGK (2003) Fabrication Technology for the development of Nose Radome for the Saras Aircraft. Technical Report. NAL, Bangalore.

Mohan Kumar, K and Srikanth, L and Surendra, C and Rahul Kumar, C and Rao, RMVGK (2007) Development of Tooling and CFRP components for SATCOM applications (ISRO-SAC). Technical Report. National Aerospace Laboratories, Bangalore, India.

Moodithaya, Ranjan and Narayan, KY and Chidananda, MS and Guruprasad, R and Thomas, S and Makker, RS and Malik, A and Ramamohan, MS (2008) Saga of Saras: Part - II: Report of Significant Events/Milestones reached during the making of SARAS Prototype - II and the lessons we learnt from PT - 1. Technical Report. National Aerospace Laboratories, Bangalore, India.

Mukherjee, Somenath and Manjuprasad, M and Raghunath, Ganesh and Anoop, AM and Onkar, AK (2009) Study of airfoil flutter. Technical Report. National Aerospace Laboratories, Bangalore, India.

Mukherjee, Somenath and Manjuprasad, M and Sharma, NK and Rana, Davinder and Onkar, AK (2008) Time domain simulation of airfoil flutter in the subsonic regime using fluid structure coupling through panel method. Technical Report. National Aerospace Laboratories, Bangalore, India.

Mukund, R (2002) Calculation of relaminarizing flow using the quasi-laminar equations. Project Report. National Aerospace Laboratories, Bangalore, India.

Mukund, R and Viswanath, PR (2006) Experimental data on relaminarising boundary layers on convex and flat surfaces. Project Report. National Aerospace Laboratories, Bangalore, India.

Muralidhara, HS and Chidananda, MS (1988) Equilibrium in a chemically reacting system. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Murthy, KNV and Subramanian, NR (1968) Non equlibrium transonic flow past slender bodies. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Murthy, MVV (1969) Stress around an elliptic hole in a cylindrical shell. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Murugan, M and Sridhar, S and Arvindam, Sunil (1990) A parallel implementation of the Gauss-Seidel method on the flosolver. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Murugesan, K and Ramamurthy, S Component Drawings for Compact By-Pass Engine. Project Report. NAL, NAL Bangalore. (Submitted)

Murugesan, K and Ramamurthy, S Determination of Pressure Distribution on Blade Cascades. Project Report. NAL, NAL Bangalore. (Submitted)

Murugesan, K and Ramamurthy, S (1978) T 18-A Turbocharger Performance Evaluation. Technical Report. NAL, NAL Bangalore. (Submitted)

Murugesan, K and Ramamurthy, S (1984) Theoretical Evaluation of Turbine Blade Profiles. Project Report. NAL, NAL Bangalore.

Murugesan, K and Ramamurthy, S and Murthy, VSS and Rajendran, R (1990) Velocity Distribution Over GTX-35-VS-HPT Stage Profiles. Project Report. NAL, NAL Bangalore. (Submitted)

Murugesan, K and Ramamurthy, S and Sankaranarayanan, S (1999) Cavitation Characteristics and Performance of Cryogenic Engine Pumps and Inducers. Project Report. NAL, NAL Bangalore. (Submitted)

Murugesan, K and Ramamurthy, S and Sankaranarayanan, S Feasibility study of small gas turbine engine development. Project Report. NAL, NAL Bangalore. (Submitted)

Murugesan, K and Sankaranarayanan, S and Ramamurthy, S (1991) Aerodynamic Investigations of High Pressure Ratio Centrifugal Compressor. Project Report. NAL, NAL Bangalore. (Submitted)

Nagarajan, V and Sundaramurthy, H (1990) Measurement Of Pitch-Damping Derivatives On Prithvi Model In The Nal 1.2m Tunnel. Technical Report. NAL, Bangalore.

Nagarajappa, B and Sathyanarayan, S and Satish, Chandra Feature Level Airbag Drop Tests on Water. Project Report. NAL, Bangalore.

Nagpurwala, QH (1986) Pressure velocity flow direction and mass flow measurements in cascade and turbomachinery testing. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Nair, Manoj T (2005) Development of a two-dimensional Aerodynamic optimisation code based on sensitivity analysis. Technical Report. National Aerospace Laboratories, Bangalore, India.

Nair, RU and Charulatha, G and Jha, RM (2006) Wire Compensated A-Sandwich Radome for Aerospace Applications. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Nair, RU and Jha, RM (2008) EM Software Package for Aerospace Tangent-ogive and Hemispherical Radomes (of Different Styles and Antenna-Aperture Distributions). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Nair, RU and Jha, RM (2005) Electromagnetic Design of a Hybrid Variable Thickness Airborne Radome. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Nair, RU and Ramesh, R and Jha, RM (2005) Preliminary EM Characterisation of Honeycomb Sandwich Saras Radome. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Nair, RU and Venu, KS and Gupta, Manisha and Narayan, Shiv and Jha, RM (2009) Boeing Aircraft In-Cabin EM Simulation Project (Material Characterization): Preliminary Measurement Studies. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Nair, RU and Venu, KS and Jha, RM (2010) ABD Radomes for Mirage 2000 Aircraft: VSWR Measurements. Project Report. CSIR-NAL, Bangalore.

Narasimhaswamy, KN (1990) Calibration Of Pitor Probes (Circular Cross Section) At Selected Subsonic Mach Number. Technical Report. NAL, Bangalore.

Narasimhaswamy, KN (1990) Calibration Of Pitot Rakes (Rectangular Cross Section) At Selected Transonic Mach Numbers. Technical Report. NAL, Bangalore.

Narayan, Shiv and Arun, K and Gopinath , R and Nair, RU and Jha , RM (2011) A Review of the Radiation Characteristics of Microwave Oven and WELS Antenna. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Narayan, Shiv and Prasad, Kurapati and Nair, RU and Jha, RM (2010) Cable based Leaky-Feeder Antennas: A Review. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Ningaiah, - and Sastry, HSP and Venkatasubramanyam, DV and Mohiddin, Jaffer M and Rao, Ramakrishna BV (1982) Development of epoxy-glass-pre-impregnated rovings suitable for filament winding. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Nitin, Khamesra and Rajan, Kurade (2008) Booster separation studies on 1:40 scale PSLV-XL model - time march tests. Project Report. National Aerospace Laboratories, Bangalore, India.

Padma, Madhuranath and Sridhar, JK (1986) Simulation study of handling characterisitics of HS-748 with and without Rotodome. Project Report. National Aerospace Laboratories, Bangalore.

Padma, Madhuranatha and Parameswaran, V and Raol, JR (1993) Flight Data Compendium Of The Unconventional Aircraft. Technical Report. NAL, Bangalore.

Parameshwara, MA and Keshab, Barai and Bhaumik, SK (2003) Failure of engine mount of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Sujata, M and Venkataswamy, MA and Suresh Kumar, M and Madan, M and Bhaumik, SK (2005) Defect investigation of failed VIth stage compressor rotor rig blades. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Madan, M and Sujata, M and Suresh Kumar, M and Bhaumik, SK (2005) Analysis of damaged parts of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Madan, M and Sujata, M and Suresh Kumar, M and Bhaumik, SK (2005) Analysis of damaged parts of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Madan, M and Sujata, M and Suresh Kumar, M and Bhaumik, SK (2005) Analysis of failed rubberized fuel tank. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Madan, M and Sujata, M and Suresh Kumar, M and Bhaumik, SK (2005) Failure analysis of HPTR blade of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Madan, M and Sujata, M and Suresh Kumar, M and Bhaumik, SK (2005) Failure analysis of HPTR blade of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Madan, M and Sujata, M and Suresh Kumar, M and Bhaumik, SK (2005) Failure analysis of intermediate gearbox of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2004) Analysis of center main bearing of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2004) Analysis of cone bearing outboard of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2004) Analysis of failed bottom plates of a wet slop tank. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2004) Failure investigation of 2nd stage compressor disc of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2004) Failure investigation of failed fuel pipelines of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Sujata, M and Keshab, Barai and Bhaumik, SK (2003) Analysis of damaged bearings of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Sujata, M and Keshab, Barai and Bhaumik, SK (2003) Analysis of failed exhaust valve of a locomotive engine. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Sujata, M and Madan, M and Bhaumik, SK (2004) Analysis of failed combustor liner side plates. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Sujata, M and Suresh Kumar, M and Madan, M and Bhaumik, SK (2005) Analysis of failed engine gearbox LP filter stud. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Sujata, M and Suresh Kumar, M and Madan, M and Bhaumik, SK (2004) Failure Analysis of failed steam turbine blades. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Sujata, M and Suresh Kumar, M and Madan, M and Bhaumik, SK (2004) Failure analysis of VOR/ILS antenna. Project Report. National Aerospace Laboratories, Bangalore.

Parameswara, MA and Venkataswamy, MA and Sujata, M and Suresh Kumar, M and Madan, M and Bhaumik, SK (2005) Failure investigation of helicopter main rotor blade forks. Project Report. National Aerospace Laboratories, Bangalore.

Parameswaraiah, R and Murthy, Sreedhara (1975) Electronic microwelding power generator for fabricating hot wire probes used in fluid flow studies. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Parameswaran, V and Raol, JR and Padma, Madhuranatha (1993) Aerodynamic Parameter Estimation From Flight Data Of The Unconventional Aircraft. Technical Report. NAL, Bangalore.

Parida, BK and Raghu, V and Prakash, - (1993) First qarterly Review Meeting - A Project SN-0-101. Technical Report. National Aerospace Laboratories, Bangalore, India.

Pashilkar, AA and Jategaonkar, RV (1998) Some Investigations Related to Gradients for Aircraft Parameter Estimation. Technical Report. National Aerospace Laboratories, Bangalore, India.

Patil, SR and Pandian, S (1991) Force Measurements On 1/20th Scale ASLV Model With Relocation of SITVC Tanks. Technical Report. NAL, Bangalore.

Patil, SR and Pandyan, S (1991) Force Measurements On 1/24th Scale Model Of ASLV With Eight Sitvic Tanks. And All Protrusions (Aslv-D3 Configuration). Technical Report. NAL , Bangalore .

Patnaik, Digbala and Thithiksha, T and Choudhury, Balamati and Jha, RM (2010) Boeing Ray Tracing Project: Refined Ray Propagation Modeling inside a Closed Elliptic Cylinder for Aircraft Fuselage Applications. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Pedar, A and Shankar, Vijayalaxmi and Jayasree, BS (1989) Evaluation methods for inter-connection structure used in parallel processing systems. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Poovannan, D and Singh, Hema and Jha, RM (2007) Suppression of probing effect in planar phased arrays using improved LMS algorithm. Technical Report. National Aerospace Laboratories, Bangalore, India.

Prakash, M.Rajendra and Murugan, Senthil and Rao, RMVGK (2007) Post curing and NDT support services for HANSA-3 Aircraft (coded-011) series productionisation program. Technical Report. National Aerospace Laboratories, Bangalore, India.

Prakash, M.Rajendra and Rao, RMVGK (2007) On field inspection of HANSA-3 Aircraft (VTHNS) at IIT Kanpur. Technical Report. National Aerospace Laboratories, Bangalore, India.

Prakash, Raghu V and Brahma, KK and Srinivasan, MN (1990) Threshold crack growth and crack closure in ductile iron. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Prasada Rao, K (1991) A Improved Control System Using Digital Technology For A Wind Tunnel Forced – Oscillation Rig. Technical Report. NAL, Bangalore.

Prathapanayaka, R and Kishore Kumar, N and Vinodkumar, N and Jayaraman, M and Varadarajan, MN (2010) Design and Development of a Contra-Rotating Turbine and Analysis using Computational Techniques. Project Report. NAL, Bangalore.

Prathapanayaka, R and Vinodkumar, N and Shobhavathy, MT and Kishore Kumar, N (2010) Numerical investigation of casing treatment effects in the axial flow compressors/Unsteady flow simulation to investigate the rotor stator interaction in the axial flow compressors. Project Report. NAL, Bangalore.

Premalatha, and Ramamoorthy, P (1991) Performance of an airfoil at low reynolds number. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Priya, P and Singh, Hema (2007) Studies of Methods of Discretization for CFD-CEM Applications. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Priya, P and Singh, Hema and Kulkarni, PS and Jha, RM (2008) Multidisciplinary Computational Aerospace Sciences (MCAS): Preliminary Studies on Source Panel Method. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Radhakrishna, M and Ananda, M and Munirathnam, V and Sarangi, A and Jana, S and Arunkumar, V (2009) Bump Foil Bearings – Feasibility Study to Achieve Rotor Speed in Excess of 50,000 rpm for Low Load Applications. Project Report. NAL, NAL Bangalore.

Raghavendra, BJ and Sharma, Saransh and Choudhury, Balamati and Jha, RM (2010) Boeing Ray Tracing Project: Refined Ray Propagation Modeling inside a Closed Elliptic Cabin with Floorboard and Windows for Aircraft Applications. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Raghuram, AC and Krishnan, RV and Radhakrishnan, S and Venkataswamy, MA and Ramachandran, V (1989) Failure of Elevator Hinge Pins of Pilotless Target Aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Raghvendra, BJ and Choudhury, Balamati and Jha , RM (2011) Surface Modeling Studies for Manned Space Modules and Launch Vehicles. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Raja, S and Shashikala, Rajappa and Janardhanan, S and Shankar, V and Raghavendra, HM and Bhavana, Jadav and Banu, Priya and Santosh, Anagoadi (2009) Active Vibration Control of L40 deck plate using smart materials. Project Report. NAL, Bangalore.

Rajagopalan, S and Sharma, SS (1986) Specification for additional dealkaliser cum water softening13; plant. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Rajamohan, -- and Balasubramanian, TS (1975) Estimation of loads and moments on a fully articulated helicopter rotor blade. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Rajamurthy, MS (1985) DO 28D1 aircraft parameter identification. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Rajamurthy, MS and Basappa, - and Bhagawan, - and Shubha, G (1993) Dynamic Wind Tunnel Testing Of A Flexible Delta Wing. Technical Report. NAL, Bangalore.

Rajamurthy, MS and Rajan, SR and Basappa, - and Niranjana, T (1993) Estimation Of Longitudinal Moment Derivatives Of Missile Configuration Using Semi Free Flying Technique. Technical Report. NAL, Bangalore.

Rajani, BN and Lanka, Harsha Gopal and Majumdar, Sekhar (2005) Laminar flow past a circular cylinder at reynolds number varying from 50 to 5000. Technical Report. National Aerospace Laboratories, Bangalore, India.

Rajappa, N and Leelavathi, K (1986) On solving the nonlinear equations arising in the application of on-body kutta condition in Hess' panel method. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Rajashekar, C and Oommen, Charlie and Amar, S and Raghukumar, HS and Isaac, JJ (2012) Developmental studies on HAN (hydroxyl ammonium nitrate) monopropellant micro thrusters – A preliminary investigation. Technical Report. National Aerospace Laboratories, Bangalore, Bangalore.

Rajendra, G and Rajeswari, Ramamurthy (2008) Modification of SARAS flap mechanism. Technical Report. NAL.

Rajendra Prakash, M and Mohan Kumar, K and Pasupathi, R and Rao, RMVGK (2003) Post curing of Hansa-3 (VT- HNW) Components. Technical Report. NAL, Bangalore.

Rajendra Prakash, M and Rao, RMVGK (2003) NDT report on the Nose Cone Radome for Jaguar Maritime Aircraft. Technical Report. NAL, Bangalore.

Rajendra Prakash, M and Revathi, A and Chandrakala, - and Rao, RMVGK (2003) Material Characterization of the Radome Fairings (TDF & ADF ) for HONE TU-142M Aircraft. Technical Report. NAL, Bangalore.

Raju, KN and Sunder, R (1983) Research and development activities in fatigue and fracture13; at the National Aeronautical Laboratory. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Ramachandran, V and Radhakrishnan, S and Venkataswamy, MA and Raghuram, AC and Krishnan, RV and Rangaraju, R (1989) Aircraft Accident Investigation and Failure Analysis of Aircraft Components. Project Report. National Aerospace Laboratories, Bangalore.

Ramamoorthy, P and Narayana, CL (1969) Spline approximation as applied to aeronautical problems. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Ramamurthy, S (1980) Closed Circuit Test Facility. Project Report. Kyushu University. (Submitted)

Ramamurthy, S and Murugesan, K (1979) Profile Loss Evaluation for T3-40 Profile. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Murugesan, K (1979) Secondary Loss Evaluation for T3-40 Profile. Technical Report. NAL, NAL Bangalore.

Ramamurthy, S and Murugesan, K (1978) Test Facility For Turbocharger. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Murugesan, K (1984) Theoretical Evaluation of Rotor Blade Profiles. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Murugesan, K (1984) Theoretical Evaluation of Stator Blade Profiles. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Murugesan, K (1984) Turbomachinery Blade Profile Design. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Murugesan, K and Rajendran, R (1988) Design and Analysis of LPT Blade profiles. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Murugesan, K and Rajendran, R (1986) Design of Turbine Rotor Blade profiles. Project Report. NAL, NAL Bangalore.

Ramamurthy, S and Murugesan, K and Sankaranarayanan, S (1986) Computer Aided Design of Centrifugal Impellers. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Rajendran, R and Rajesh, E and Janaki, Rami Reddy and Thennavarajan, S and Nitesh, Kumar and Daniel, Manoharan (2009) Experimental Evaluation of Thermal Performance of Regenerative Heat Exchanger. Project Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Sankaranarayanan, S and Murugesan, K (1986) Aerodynamic Design of High Pressure Ratio Centrifugal Compressors. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Sankaranarayanan, S and Murugesan, K (1986) Aerodynamic Design of High Pressure Ratio Centrifugal Compressors. Technical Report. NAL, NAL Bangalore. (Submitted)

Ramamurthy, S and Sankaranarayanan, S and Murugesan, K (1989) Comparative Performance Evaluation of Gas Turbine Engine Starters. Project Report. NAL, NAL Bangalore. (Submitted)

Ramaswamy, MA and Narasimhaswamy, KN (1991) Flow Visualisation Studies On Wall Mounted Pitot Type Intake With Splitter Plate. Technical Report. NAL, Bangalore.

Ramaswamy, Setty J and Venkatesh, S and Dayananda, GN and Daniel, J Christopher and Varughese, Byji (2009) Mechanical Design Aspects of 4.9 m Dia., 13 m Length Computer Controlled Autoclave. Project Report. National Aerospace Laboratories.

Ramesh, K and Krishnamurthy, M (1990) A Computer Code to Estimate The Normal Force and Pitching Moment Characteristic Tics of Ax symmetric Bodies Up to High Angles of Attack. Technical Report. NAL, Bangalore.

Rangaraju, R and Bhaskaran, TA and Venkataswamy, MA and Keshab, Barai and Bhaumik, SK (2003) Analysis of failed loop condenser tube. Project Report. National Aerospace Laboratories, Bangalore.

Rangaraju, R and Bhaumik, SK and Bhaskaran, TA and Venkataswamy, MA and Parameshwara, MA and Sujata, M (2002) Connecting rod failure of an engine of a particular type of aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Rangaraju, R and Bhaumik, SK and Bhaskaran, TA and Venkataswamy, MA and Parameshwara, MA and Sujata, M (2002) Failure Analysis of parts of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Rangaraju, R and Bhaumik, SK and Bhaskaran, TA and Venkataswamy, MA and Parameswara, MA and Sujata, M (2002) Analysis of cracked HPTR disc of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Rangaraju, R and Bhaumik, SK and Bhaskaran, TA and Venkataswamy, MA and Parameswara, MA and Sujata, M (2002) Analysis of failed aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Rangaraju, R and Bhaumik, SK and Bhaskaran, TA and Venkataswamy, MA and Parameswara, MA and Sujata, M (2002) Failure Analysis of Bearings of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Rangaraju, R and Bhaumik, SK and Bhaskaran, TA and Venkataswamy, MA and Parameswara, MA and Sujata, M (2003) Failure analysis of LPT rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Rangaraju, R and Sujata, M and Bhaskaran, TA and Venkataswamy, MA and Bhaumik, SK (2003) Analysis of cracked D-19 root rib plate of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Rani, Amitha BE and Basu, Bharathibai J (2009) Green corrosion inhibitors - an overview. Technical Report. National Aerospace Laboratories, Bangalore, India.

Ranjan, - and Ananda, CM and Ganesh, VS (1997) A Report of Sound Pressure Level and Vibration Measurement at NGEF. Technical Report. Natinal Aerospace Laboratories, Bangalore, India.

Raol, JR (1988) Some extensions of pugachev's nonlinear estimation theory for stochastic systems. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Rastogi, Mayuri and Singh, Hema and Jha, RM (2006) Joint Optimization of RCS and IR Reduction. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Raveendranath, U and Jha, RM (2002) EM Design and Analysis of the TU 142 M A/c Radome for TDF Antenna. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Raveendranath, U and Jha, RM (2002) A Preliminary EM Design of Radome for TDF Antenna onboard TU 142 M A/c. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Raveendranath, U and Ramesh, R and Jha, RM (2003) Sectoral Patching Scheme for EM Performance Tuning of Aircraft Nose Radomes. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Raveendranath, U and Srinivas, CK and Jha, RM (2004) EM Analysis of ATP Tests for Jaguar Radomes. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Ravichandran, KS and Desai, SS and Rangarajan, R (1986) Modification to the cartesian grid in 3-D potential code for flow past swept wings. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Ravichandran, KS and Singh, JP (2000) A Computational Study of Two-species Spherical Explosion in Air. Project Report. National Aerospace Laboratories, Bangalore, India.

Saikrishna, CN and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of aeroengine parts. Project Report. National Aerospace Laboratories, Bangalore.

Sajeer, Ahmed and Swamy, MS Horizontal Tail And Flap Effectiveness Studies On Mig-21 M Aircraft Model. Technical Report. NAL, Bangalore.

Samiullah, TH and Rao, RMVGK (2004) Development and Fabrication of Composite Tooling for the DWR Mark-Ii RADOME. Technical Report. NAL, Bangalore.

Samiullah, TH and Rao, RMVGK (2003) Fabrication of PV2-GE Air Intake Ducts for 1 :7 .645 and 1 :4 .405 scale LCA Kaveri Air Intake Models. Technical Report. NAL, Bangalore.

Samiullah, TH and Vanaja, A and Rao, Sandhya and Kavitha, - and Chandrakala, - and Rao, RMVGK (2007) Some Engineering Solutions for Large Scale Production of Polyurethene foam (PUF) Panels (Mark II Radome Development). Technical Report. National Aerospace Laboratories, Bangalore, India.

Sandeep, P and Deshpande, MD (2003) Note on the no-slip boundary condition. Technical Report. National Aerospace Laboratories, Bangalore, India.

Sankaranarayanan, S and Ramamurthy, S and Murugesan, K (1991) Design and Development of an Industrial Centrifugal Compressor. Technical Report. NAL, NAL Bangalore. (Submitted)

Sankaranaryanan, S and Murugesan, K and Ramamurthy, S (1993) Flow Distortion Studies in KAVERI Engine Inlet Duct for Intake-Engine Compatibility. Project Report. NAL, NAL Bangalore.

Shaik , Ismil and Jatinder, Singh (2004) HELI-HQPACK Version 1 .0. Technical Report. NAL, Bangalore.

Shanbhag, VV and Narasimha, R (1970) On the spline approximation for integrals with a logarithmic kernel. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Shantha Kumar, N and Rao, Narayana P and Naidu, VPS and Girija, G New Fuel Gauging Technique for LCA. Project Report. CSIR-NAL.

Shantha Kumar, N and Raol, JR (1993) Pc Based Program For Estimation Of Aerodynamic Derivatives From Aeroballistics Range Trajectory. Technical Report. NAL, Bangalore.

Sharath, PP and Senthil Kumaran, R and Jagannatha Rao, B and Poornima, N (2009) CALIBRATION OF PlTOT STATIC PROBES FOR HAL, KORAPUT. Documentation. NAL, Bangalore.

Sharma, RC and Gopinath, N and Karthik, N (2009) Concept study of fin mounted tail plane for pitch-up alleviation of LCA. Technical Report. National Aerospace Laboratories, Bangalore, India.

Sharma, Saransh and Raghavendra, BJ and Choudhury, Balamati and Jha, RM (2010) MATLAB and Boeing AGPS Generated Quadric Patches and Hybrids for Aircraft Fuselage Applications. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Shashikala, Prakash and Venkatasubramanyam, DV and Kiran, PVR Sai and Aravind, Pavate and Hemant, Kabra and Om, Prakash Alone and Bharath, Krishnan (2009) High Performance Compact FPGA Controller for Active Vibration Control of Aerospace Structures - Technical Report. Project Report. NAL, Bangalore.

Shekhar, Shashi N (1992) Perspective visualisation of aircraft flight. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Shiv, Narayan and Arun, K and Jha , RM (2012) EM Performance Analysis of Tri-layer Metamaterial FSS for Radome Applications. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Shivaramaiah, - and Chandrasekhar, C and Nair, NK (1978) Fabrication and erection procedures for development of computerised full scale fatigue test rig. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Shobhavathy, MT and Prathapanayaka, R and Jayaraman, M and Dilip Kumar, B and Satishkumar, S and Samiullah, TH and Rajagopal, RS and Janaki, Rami Reddy Development of a High Pressure Ratio Axial Fan Stage with Non-metallic Rotor Blads. Project Report. NAL, Bangalore.

Singh, Hema and Choudhury, Balamati and Narayan, Shiv and Jha, RM (2011) RF Field Simulation inside a Closed Cuboid due to a Cable-based Leaky Feeder (LCX) Antenna. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Singh, Hema and Hiremath, Gouramma and Choudhury, Balamati and Jha , RM (2012) Boeing Aircraft In-cabin EM Simulation Project: Conceptual Comparison between Image Method and Refined Ray Tracing Method. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Singh, Hema and Jha, RM (2010) RF Field Computations inside a Closed Aircraft Cabin: Software User Manual Update. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Singh, Hema and Lekshmi, Kavitha BS and Poovannan, D and Jha, RM (2007) Pattern synthesis studies for planar and non-planar conformal arrays. Technical Report. National Aerospace Laboratories, Bangalore, India.

Singh, Hema and Priyesh, K and Jha , RM (2012) Active Cancellation in Adaptive Array with Non-uniform Inter-element Spacing. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Sinha, UN (1985) Hodograph of lifting flow past symmetric joukowski airfoil13;. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sinha, UN (1985) Hodograph of non-lifting flow past joukowski airfoil. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Sivapragasam, M and Ramamurthy, S (2009) Inlet Flow Distortion Effects in Aircraft Gas Turbine Engine Compression Systems. Technical Report. NAL, NAL Bangalore.

Sneha, HL and Singh, Hema and Jha , RM (2012) Radar Cross Section (RCS) of a Series-Fed Dipole Array including Mutual Coupling Effect. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Sreenivasan, CR and Sivaramakrishnan, Rajalakshmy and Sarasamma, VR (1989) Flosolver Mk1B - An eight processor parallel machine. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sridhar, JK and Satyabhagavan, B (1985) Computation of transfer function matrices. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sridhara, K (1970) Gas making in the dilution zone of a combustions chamber. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Srihari, Shylaja and Revathi, A and Murugan, M. Sendil and Rao, RMVGK (2006) Conditioning and qualifying a microwave - BIT (Built in test) unit for use in the Tarang system [End User - IAF]. Technical Report. National Aerospace Laboratories, Bangalore, India.

Srihari, Shylaja and Vanaja, A and Prakash, M.Rajendra and Sugun, BS and Revathi, A and Kavitha, - and Rao, Sandhya and Murugan, Senthil and Chandrakala, - and Rao, RMVGK (2007) Industrial Test Services - COMPAC Program. Technical Report. National Aerospace Laboratories, Bangalore, India.

Srikanth, VC and Mujumdar, Sekhar (1992) Relative performance of different low reynolds number turbulence models for prediction of fully developed channel13; flow. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Srinatha Sastry, CV and Padma, Madhuranatha and Parameswaran, V and Raol, JR (1994) Simulation Modeling Of A Transport Aircraft Using Flight Test Data. Technical Report. NAL, Bangalore .

Srinatha Sastry, CV and Sathyabhagavan, B and Raol, JR and Sinha, NK (1990) A scheme for sensor failure management using observers and knowledge based approach. Technical Report. National Aerospace Laboratories, Bangalore, India.

Srinathkumar, S and Jategaonkar, RV (1985) Robust eigensystem assignment in multi input systems. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Srinivas, CK and Jha, RM (2005) Design of Aerospace Vehicles for Infrared Signature Reduction. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Srinivas, CK and Nair, RU and Jha, RM (2004) Jaguar Radomes Measurements at ELTA Israel: Analysis of EM Measurements. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Srinivas, CK and Sridevi, B and Raveendranath, U and Jha, RM (2003) EM Design and Analysis of the TU 142 M A/c Radome for ADF Antennas. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Srinivas, CK and Sunithamma, J and Jha, RM (2004) Determination of Optimal Antenna Location on Aircraft Structures: Final Technical Report. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Srinivasan, Radhakrishnan (1990) The asymptotic solution of the Korteweg-De Vries equation with a single soliton. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Structures Division, - (2006) Annual Report of Structures Division 2005-2006. Technical Report. National Aerospace Laboratories, Bangalore, India.

Subramanian, NR and James, M (1987) On 3D boundary layer computations on swept wings. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sudheer, C (1994) Database Management Strategy Of The LCA Aerodynamic Data Version 3 .0 For LCA Real Time Simulation. Technical Report. NAL, Bangalore.

Sugun, BS and Rao, RMVGK (2007) Feasibility studies on Fiber Metal Laminates (FML) - An approach towards economic production for Industrial Application. Technical Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Bhaskaran, TA and Bhaumik, SK (2003) Analysis of failed STBD outrigger strut assembly of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaskaran, TA and Bhaumik, SK (2003) Failure Analysis of Injection wheel cleaning tool. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaskaran, TA and Bhaumik, SK (2003) Failure Analysis of Injection wheel cleaning tool. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaskaran, TA and Bhaumik, SK (2003) Failure analysis of bolts. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaskaran, TA and Venkataswamy, MA and Bhaumik, SK (2003) Analysis of failed STBD outrigger strut assembly of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2003) Analysis of 2nd stage compressor rotor blades of an aeroengine failed during vibration fatigue testing. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2003) Analysis of Inner Shaft PTO and Gear PTO of AMAGB of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2004) Analysis of cracked cooling tubes of air-to-air radiator of a particular type of aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2003) Analysis of damaged parts of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2004) Analysis of failed combustion chamber bolts of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2003) Analysis of failed compressor stator blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2003) Analysis of failed tubes of vapour absorption machine. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2003) Analysis of fractured exhaust valve. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2004) Analysis of fractured rod assembly of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2004) Analysis of fractured worm shaft and pin used in automobile power steering systems. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2003) Estimation of retained austenite in rotary slide valves. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2004) Failure analysis of damaged components of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2004) Failure analysis of damaged parts of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2004) Failure analysis of exhaust pipe of a MICROLITE aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2004) Failure analysis of reduction gear of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2003) Metallurgical analysis of rotary slide valve of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2003) Metallurgical examination of failed hub Plate Lower of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Bhaumik, SK (2003) Plating of kick starter shaft for rust prevention. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Madan, M and Bhaumik, SK (2008) Analysis of 55 hp rotary engine. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Bhaumik, SK (2011) Analysis of Rubber ‘O’ Ring Installed on ESN: 690 124. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Bhaumik, SK (2011) Analysis of crash helmet and survival kit items of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Bhaumik, SK (2008) Analysis of debris collected from RH-wing tank and engine fuel filter element, and examination of components of fuel pumping system of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Bhaumik, SK (2008) Analysis of failed bolt of horizontal stabilizer support (RH) of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Bhaumik, SK (2008) Defect investigation of strut tube assembly. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Bhaumik, SK (2008) Failure analysis of main door Assembly edge frame of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Bhaumik, SK (2008) Failure analysis of plate assembly Track # 5 and Jack # 3 of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Bhaumik, SK (2008) Failure investigation of multiplicator of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Bhaumik, SK (2008) Investigation of failed HP turbine blade of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Bhaumik, SK (2008) Metallurgical evaluation of used bolts of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Bhuvana, R (2011) Examination of a damaged printed circuit board. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Biswas, Swati and Ganeshachar, MD and Venkataswamy, MA and Bhaumik, SK (2007) Failure analysis of input pinion shafts and intermediate pinion shaft of sugar crushing mills. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Raghavendra, K and Bhaumik, SK (2011) Failure Analysis of Nose LG Door Port of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Suresh Kumar, M and Venkataswamy, MA and Bhaumik, SK (2006) Analysis of failed rivets retrieved from brake assembly of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Madan, M and Suresh Kumar, M and Venkataswamy, MA and Bhaumik, SK (2006) Analysis of main undercarriage torque link bolts of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2007) Analysis of components and debris from an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2008) Analysis of failed 55 hp rotary engine. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2008) Analysis of heat treated gear wheel material. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of 1st stage LP compressor blade of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of 1st stage compressor blade of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2007) Failure analysis of a helicopter main gearbox lube pump. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of axial compressor rotor stage III of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2008) Failure analysis of components belonging to an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2007) Failure analysis of compressor stator blades stage II & III of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2011) Failure analysis of frame separation device of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2007) Failure analysis of gearbox mounting bolt. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Failure analysis of I stage compressor rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Metallurgical Failure Analysis of Collector Pinion of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Metallurgical Failure Analysis of Cracked ARIS Casing Ring of a Helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Venkataswamy, MA and Raghavendra, K and Bhaumik, SK (2011) Metallurgical failure analysis of inter-rotor and inter-shaft bearings of aeroengines. Project Report. National Aerospace Laboratories, Bangalore, India.

Sujata, M and Madan, M and Venkataswamy, MA and Sri Ganesh, A and Ranganath, VR and Bhaumik, SK and Sridhar, MK (2009) Failure analysis of centre glass panel of cockpit of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Sundaram, S (1988) Skin friction measurements in a turbulent boundary layer. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sundaramurthy, H and Narayana, T and Gurjale, AK (1973) Free oscillation testing on a sting-mounted 25 cone model in the NAL 4-foot trisonic wind tunnel. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sunder, R (1990) Indo-Soviet Research on Aeronautical Fatigue (ISRAF): Task-1. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sunder, R (1989) Indo-Soviet joint research on fatigue and fracture: Report on visit to USSR under ILTP programme. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Sunil, S and Sunithamma, J and Venu, KS and Jayaram, KY and Raveendranath, U (2001) M Design Studies for General Monolithic Airborne Radomes. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Sunitha, L and Premjith, AV and Vinoy, KJ and Jha, RM (1996) Shaping Analysis for Radar Cross Section (RCS) Reduction for Missiles: Annual Technical Report (1994-1995). Project Report. CSIR-NAL, Bangalore.

Sunithamma, J and Jha, RM (2004) RCS Prediction Techniques for Helicopter Like Hovering Platforms. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Sunithamma, J and Nair, RU and Jha, RM (2005) EM Design Strategies for C-Sandwich Radomes. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Suresh Kumar, M and Madan, M and Parameswara, MA and Sujata, M and Venkataswamy, MA and Bhaumik, SK (2005) Failure analysis of kinematic linkage of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Parameswara, MA and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2005) Analysis of cracked plunger elements. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Parameswara, MA and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2005) Analysis of failed HPTR blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Parameswara, MA and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2005) Fracture analysis of propeller spinner of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Manjunatha, CM and Ranganath, VR and Sujata, M and Bhaumik, SK (2006) Failure analysis of compressor rotor blades of 500 MW generator. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Parameswara, MA and Sujata, M and Bhaumik, SK (2005) Analysis of fatigue tested IC engine exhaust valves. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Parameswara, MA and Sujata, M and Bhaumik, SK (2005) Analysis of fatigue tested IC engine exhaust valves. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Parameswara, MA and Sujata, M and Bhaumik, SK (2005) Failure analysis of MGB housing of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Parameswara, MA and Sujata, M and Bhaumik, SK (2005) Failure analysis of extractor upper and lower bearing. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Analysis of FOD on Ist stage compressor blades of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Analysis of FOD on an LPC I stage rotor blade of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Analysis of FOD on the LPC I stage rotor blades of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Analysis of failed left wheel hub assembly of a microlight aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Analysis of failed lever assembly of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Analysis of failed nose wheel assembly of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Analysis of failed retainer ring of wheel hub of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Analysis of failed spur gear. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Analysis of fatigue tested LPTR blades failure. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Analysis of fractured CBLS lug of a an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Analysis of shear bolts of power take-off shaft of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Defect investigation of LPT rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Defect investigation of compressor stator blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Examination of internal surface of pitch change rods of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of 1st and 2nd stage rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of Bolt-Blade fork (Big) of main rotor assembly of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Failure analysis of HPTR blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Failure analysis of I stage compressor rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Failure analysis of K12 buckle latch. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Failure analysis of No.4 bearing of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Failure analysis of cabin attachment brackets of body structure of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Failure analysis of clogging indicator. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Failure analysis of clogging indicator. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Failure analysis of components belonging to an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of components from 55 HP rotary engine. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of flow transmitter (FT) tapping line. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of mixing unit attachment tab (LH) of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of process gas boiler tubes. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Failure analysis of steel wheel. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of tail pipe of a helicopter. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2007) Failure analysis of undercarriage door operating lever of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Fractographic study of failed component of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Investigation of tail rotor cable of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Metallurgical investigation of tubes of rocket pods. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Kannan, CR and Bhaumik, SK (2006) Analysis of parts of an aeroengine and a few wreckage items involved in the accident of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Analysis of damaged bearing of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Analysis of damaged blades of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Analysis of damaged components from a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Analysis of damaged port aileron trailing edge of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Analysis of damaged port aileron trailing edge of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Analysis of failed Tail Gear Box housing of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Analysis of screws removed from an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) EDX analysis of fuel samples collected from an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of 12 mm OD SS 304 tube pertaining to instrument tapping line of nitrogen storage vessel. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of HP Turbine blades pertaining to an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of HP Turbine blades pertaining to an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of HP Turbine blades pertaining to an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2006) Failure analysis of MGB and TGB housings of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2004) Failure analysis of Tee-nut. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of broken parts of hydraulic piston pump of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of centre support bevel gear of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of collector mesh of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of components retrieved from the wreckage of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of components retrieved from the wreckage of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of drop-tank suspension rod of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of engine gearbox components. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of high pressure ratio fan blade root. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2006) Failure analysis of intermediate casing of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of jack attachment bolt of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of sliding plates of seat assembly. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of tachometer generator bolt. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Failure analysis of turbine blades and nozzle guide vanes of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Madan, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2005) Investigation of first stage compressor rotor blade of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Parameswara, MA and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2004) Failure investigation of polymer coated II stage compressor rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Sujata, M and Madan, M and Venkataswamy, MA and Banerjee, A and Bhattacharya, S and Bhaumik, SK (2006) Failure analysis of input shaft of Maerz kiln # 6 skip drive gearbox. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2006) Analysis of damage to the vane trailing edge of inner wing (RH) of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2007) Analysis of failed 35 HP rotor assembly of Wankel engine. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2006) Analysis of failed LPTR blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2006) Analysis of failed flexible coupling of variable diffuser drive system of 1.2 m tunnel. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2006) Analysis of failed pitch change rod of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2006) Analysis of failed plunger spring. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2006) Analysis of failed stainless steel pipe. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2006) Analysis of particles from 5 um filter in ECS of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2006) Failure analysis of G4 pistons. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2006) Failure analysis of IGB and TGB of a crashed helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2006) Failure analysis of a 3rd stage compressor stator blade. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2006) Failure analysis of compressor rotor blade of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Sujata, M and Madan, M and Venkataswamy, MA and Bhaumik, SK (2006) Investigation of LPT rotor blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore, India.

Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Bhaumik, SK (2006) Investigation of HPT rotor blades. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Madan, M and Bhaumik, SK (2005) Failure analysis of engine rear attachment tie-rod of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Madan, M and Bhaumik, SK (2005) Failure analysis of re-heat fuel control unit parts. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Madan, M and Bhaumik, SK (2005) Investigation on AMAGB bearings. Project Report. National Aerospace Laboratories, Bangalore.

Suresh Kumar, M and Venkataswamy, MA and Sujata, M and Parameswara, MA and Madan, M and Bhaumik, SK (2005) Investigation on AMAGB bearings. Project Report. National Aerospace Laboratories, Bangalore.

Swamy, Mruthunjaya KM and Ramamurthy, S (1987) Raw test data on VKI-1 profile obtained at NAL transonic cascade tunnel. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Swathi, N and Thithiksha, T and Choudhury, Balamati and Jha, RM (2010) Boeing Ray Tracing Project: Refined Ray Propagation inside a Closed Elliptic Aircraft Cabin with Floorboard and Luggage-bins. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Tewari, SK (1987) A new leading-edge device for wind turbine blades. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Tewari, SK and Narasimhaiah, - and Samaraj, AC (1981) Large scale electricity generation using wind energy (Some possibilities in India). Technical Report. National Aeronautical Laboratory, Bangalore, India.

Tewarl, SK (1987) Selection of sites in Andhra Pradesh and Rajasthan for wind monitoring under D.N.E.S co-ordinated project. Project Report. National Aerospace Laboratories, Bangalore.

Thennavarajan, S and Janaki, Rami Reddy and Nitesh, Kumar and Krishnoji Rao, KS and Loganathan, KS and Jagannatha Rao, B and Ramamurthy, S (2009) Performance of a Jet Pump used to Test the Heat Exchanger of TEJAS Aircraft. Project Report. NAL, NAL Bangalore.

Thithiksha, T and Swathi , N and Choudhury, Balamati and Jha, RM (2010) Boeing Ray Tracing Project: Ray Path Propagation Modeling inside an Elliptic Cylinder for Aircraft Fuselage Applications. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Thithiksha , T and Patnaik, Digbala and Choudhury, Balamati and Jha , RM (2011) Ray Propagation inside a Manned Space Module. Technical Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Thunga, KS (1987) Stresses in centrifugal compressor test impellers. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Tiwari, AK and Anupama, GK and Mishra, B and Jha, RM (2000) Determination of Optimal Antenna Locations on Aircraft Structures (1997-1998). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Vaitheeswaran, SM and Vedavathy, K (2009) Survey of image reconstruction techniques using high frequency scattering methods. Technical Report. National Aerospace Laboratories, Bangalore, India.

Vanaja, A and Padmavathi, T and Jyotsna, T.S and Rao, RMVGK (2006) Radome Paint Indigenisation - Some Initiatives. Technical Report. National Aerospace Laboratories, Bangalore, India.

Vanaja, A and Rao, RMVGK (2007) Commissioning of a controlled strain rheometer equipment for characterization of Polymers, Prepregs and composites. Technical Report. National Aerospace Laboratories, Bangalore, India.

Vanaja, A and Rao, Sandhya and Rao, RMVGK (2003) Glass Transition Temperature (T g) measurements on travel coupons of Nose Cone Radome for Jaguar Maritime Aircraft. Technical Report. NAL, Bangalore.

Vanathusinnappan, P (1987) Proximate analysis of garbage samples: A test report. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Varute, PT and Gnanesh, N (1991) NALLA prototype flight envelope. Technical Report. National Aerospace Laboratories, Bangalore, India.

Vasudevachar, C and Ramachar, D and Ramamurthy, S (1996) CAD Drawings of Clocter Compressor. Project Report. NAL, NAL Bangalore. (Submitted)

Venkatarajan, D and Latha, K (1985) Comprehensive software package for infrastructural13; applications - personal inventory of stores. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Venkatasubramanyam, BV and Ningaiah, - (1981) Mechanical design aspects of A 2.4m diameter 6m long autoclave. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Venkataswamy, MA (2004) Failure analysis of collared stud. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Bhaskaran, TA and Keshab , Barai and Sujata, M and Bhaumik, SK (2003) Analysis of turbine moving blades. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Bhaskaran, TA and Parameshwara, MA and Bhaumik, SK (2003) Analysis of Failed Feed Slide Guide Ways of Hess Spinning Machine. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Bhaskaran, TA and Parameswara, MA and Sujata, M and Keshab, Barai and Bhaumik, SK (2003) Analysis of components from damaged engine of a crashed aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Bhaskaran, TA and Parameswara, MA and Sujata, M and Keshab, Barai and Bhaumik, SK (2003) Analysis of cracked MGB housing of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Bhaskaran, TA and Sujata, M and Parameswara, MA and Keshab, Barai and Bhaumik, SK (2003) Failure analysis of main landing attachment bolts of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Keshab, Barai and Bhaumik, SK (2003) Failure analysis of boiler tube and wash water line. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Keshab, Barai and Sujata, M and Bhaskaran, TA and Bhaumik, SK (2003) Failure analysis of exhaust valve of cylinder head of a motor cycle. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Keshab, Barai and Sujata, M and Bhaskaran, TA and Bhaumik, SK (2003) Failure analysis of labyrinth pins of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Bhaumik, SK (2004) Analysis of Failed Redler Link. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Bhaumik, SK (2004) Analysis of failed Speed Governor of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Bhaumik, SK (2005) Analysis of failed components of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Bhaumik, SK (2004) Analysis of failed fuel pump of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Bhaumik, SK (2004) Failure analysis of canopy locking handle of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Bhaumik, SK (2004) Investigation of structural failure of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Keshab, Barai and Bhaskaran, TA and Bhaumik, SK (2003) Analysis of a failed pinion. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Keshab, Barai and Bhaskaran, TA and Bhaumik, SK (2003) Analysis of bush of IDS assembly of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Keshab, Barai and Bhaskaran, TA and Bhaumik, SK (2004) Analysis of cracked second stage compressor rotor drum of engines of a particular type of aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Keshab, Barai and Bhaskaran, TA and Bhaumik, SK (2003) Analysis of deposit on the crown face of an IC engine exhaust valve. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Keshab, Barai and Bhaskaran, TA and Bhaumik, SK (2003) Analysis of failed exhaust valve. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Keshab, Barai and Bhaskaran, TA and Bhaumik, SK (2003) Analysis of failed eye-lug of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Keshab, Barai and Bhaskaran, TA and Bhaumik, SK (2003) Analysis of failed missile model. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Keshab, Barai and Bhaskaran, TA and Bhaumik, SK (2003) Failure analysis of bearings of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Keshab, Barai and Bhaumik, SK (2003) Failure Analysis of Air Turbine Starter (ATS) Quill Shaft. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Keshab, Barai and Bhaumik, SK (2003) Fractographic examination of failed part of a cluster of body structure of a crashed helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Madan, M and Suresh Kumar, M and Bhaumik, SK (2005) Analysis of failed camshaft. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Madan, M and Suresh Kumar, M and Bhaumik, SK (2005) Failure analysis of rod end top of the tracking link assembly of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Suresh Kumar, M and Madan, M and Bhaumik, SK (2005) Analysis of failed components of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Parameswara, MA and Sujata, M and Suresh Kumar, M and Madan, M and Bhaumik, SK (2005) Analysis of failed components of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Bhaumik, SK (2004) Analysis of failed tubes of Visbreaker heater BA41201. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Keshab, Barai and Bhaskaran, TA and Bhaumik, SK (2003) Analysis of failed Sach foot adapter and Socket adapter. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Keshab, Barai and Bhaskaran, TA and Bhaumik, SK (2003) Failure analysis of Support Clamp RH of oil cooler support of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Keshab, Barai and Bhaumik, SK (2004) Analysis of failed bolt of SACH foot adaptor. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Keshab, Barai and Parameswara, MA and Bhaumik, SK (2003) Analysis of failed main wheel hub of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Keshab, Barai and Parameswara, MA and Bhaumik, SK (2003) Analysis of failed main wheel hub of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Keshab , Barai and Bhaskaran, TA and Bhaumik, SK (2003) Analysis of pins and labyrinth of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Madan, M and Suresh Kumar, M and Bhaumik, SK (2006) Analysis of failed retainer ring of wheel hub of an aircraft. Project Report. National Aerospace Laboratories, Bangalore, India.

Venkataswamy, MA and Sujata, M and Madan, M and Suresh Kumar, M and Bhaumik, SK (2006) Analysis of raw material used for the fabrication of front and rear stub wing spars. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Madan, M and Suresh Kumar, M and Bhaumik, SK (2006) Failure analysis of Nose landing gear strut assembly. Project Report. National Aerospace Laboratories, Bangalore, India.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2004) Analysis of Blind rivets NAS 1919 M05S08. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2004) Analysis of Boiler # 2 Start up vent line. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2004) Analysis of components retrieved from the wreckage of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2004) Analysis of failed Merox off gas line to crude heater. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2004) Analysis of failed steam turbine nozzles. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2004) Analysis of failed/damaged LPTR blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2004) Analysis of fractured 2nd stage compressor blade of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2004) Analysis of sagged superheater tube. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2004) Compressor stator blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2004) Defect investigation of HPTR blades of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2004) Failure Analysis of Air Turbine Starter (ATS) Bolt. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2004) Failure analysis of cracked connecting piece of BFW preheater. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2004) Failure analysis of cracked connecting piece of BFW preheater. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2004) Failure analysis of rotary slide valve of an engine of a crashed aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Bhaumik, SK (2004) Failure analysis of tail rotor control cables and tail rotor blades retrieved from the wreckage of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Madan, M and Suresh Kumar, M and Bhaumik, SK (2005) Failure analysis of Main wheel hub of a crashed aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Madan, M and Suresh Kumar, M and Bhaumik, SK (2005) Failure analysis of brake pads of aircrafts. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Suresh Kumar, M and Madan, M and Bhaumik, SK (2005) Failure analysis of components pertaining to a crashed aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Suresh Kumar, M and Madan, M and Bhaumik, SK (2005) Failure analysis of control tube of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Suresh Kumar, M and Madan, M and Bhaumik, SK (2005) Failure analysis of control tube of a helicopter. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Suresh Kumar, M and Madan, M and Bhaumik, SK (2005) Failure analysis of crashed engine components pertaining to an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Parameswara, MA and Suresh Kumar, M and Madan, M and Bhaumik, SK (2005) Failure analysis of main fitting subassembly of main landing gear of an aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Suresh Kumar, M and Madan, M and Bhaumik, SK (2005) Analysis of damaged components of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Venkataswamy, MA and Sujata, M and Suresh Kumar, M and Madan, M and Bhaumik, SK (2005) Analysis of damaged components of an aeroengine. Project Report. National Aerospace Laboratories, Bangalore.

Venkatesh, S and Govindan, Kutty M and Gowda, MNN and Ramesh, Kumar and Ramachandra, HV and Moorthy, Emayavaramba MV (2010) Quality Assurance (QA) Manual of HSTDV Launch Vehicle Segments (CE Shell, Bonded CE-CP Shell and Assembly). Project Report. NAL, Bangalore.

Verma, RS (1990) Feasibility Of Undertaking Tests On A Aeroelastic Wing Model At Supersonic Speeds. Technical Report. NAL, Bangalore.

Verma, RS and Sundaramurthy, H (1990) Design Features And Stress Analysis Of A 0.686-Scale Standard Dynamics Model. Technical Report. NAL, Bangalore.

Verma, SB and Mathur, NB (2007) Experimental Studies of Conical Aerospike Nozzles. Project Report. National Aerospace Laboratories, Bangalore.

Verma, SB and Mathur, NB (2006) Experimental study of conical aerospike nozzles. Project Report. National Aerospace Laboratories, Bangalore.

Verma, SB and Mathur, NB (2008) Experimental study of conical aerospike nozzles. Project Report. National Aerospace Laboratories, Bangalore.

Vijayakumar, PS (2010) Wavelet approach for Active Vibration Control. Project Report. NAL, Bangalore.

Vinay Kumar, - (1990) Aerodynamic Force Measurement On A 1/10th Scale Model Of AGNI Missile Payload Plus IInd Stage. Technical Report. NAL, Bangalore.

Vineet, Kumar and Rajeswari, Ramamurthy S and Alvin, Anthony (2009) Saras aircraft: feasibility of increasing weahercock stability by modification of dorsal fin. Technical Report. NAL.

Vinoy, KJ and Jha, RM (1994) Radar Absorbing Materials (RAM) - A Review. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Vinoy, KJ and Jha, RM (1994) Radar Absorbing Materials (RAM): A Cross-Indexed Bibliography (1956-1993). Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Vinoy, KJ and Jha, RM (1997) Shaping Analysis for Radar Cross Section (RCS) Reduction for Missiles: Annual Technical Report (1995-1996). Project Report. CSIR-NAL, Bangalore.

Vinoy, KJ and Sunitha, L and Jha, RM (1998) Shaping Analysis for Radar Cross Section (RCS) Reduction for Missiles: Final Report. Project Report. CSIR-NAL, Bangalore.

Vinoy, KJ and Sunitha , L and Jha , RM (1996) Preliminary EM Design Considerations for Radome, Antenna Locations, and ESD on LTA SARAS-Duet Aircraft. Project Report. CSIR-NAL, Bangalore.

Viswanathan, R (1970) An automatic control system for resonance tracking in structural vibration testing. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Vittal, MGS and Rao, Dhruva NS (1987) Development of DC-DC LVDT transducer. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Wind Energy Group, - (1963) Review of progress in utilization of wind power (February 1962 to December 1963). Technical Report. National Aeronautical Laboratory, Bangalore, India.

Yadunath, Nikhila and Thithiksha, T and Choudhury, Balamati and Jha, RM (2010) Boeing Ray Tracing Project: Time-independent Ray Propagation inside a Right Circular Cylindrical Cavity. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Thesis

Mukund, R (2002) Relaminarization in a short acceleration zone on a convex surface (NAL PD EA 0511). PhD thesis, Indian Institute of Science.

This list was generated on Fri Apr 25 01:03:44 2014 IST.