Browse by Department
Number of items: 26.
Conference or Workshop Item
Saikrishna, CN and Ramaiah, KV and Bhaumik, SK and Vidyashankar, B (2012) Functional fatigue in NiTi shape memory alloy wires - A comparative study. In: National Conference on Smart Materials Structures and Systems, 21-22, Coimbatore.
Silambarasan , T and Soma, Dutta (2012) Fabrication of vertically aligned stand alone ZnO nanowire by template assisted approach. In: 17th National Seminar on Ferroelectrics and Dielectrics (NSFD-2012), 17-19 December 2012, Bhubaneswar, Odissa.
Singh, AK and Hu, J and Shu, J and Mao, HK and Hemley, RJ (2012) Strength of rhenium from x-ray diffraction experiments under nonhydrostatic compression to 250 GPa. In: 23rd International Conference on High Pressure Science and Technology (AIRAPT-23): Journal of Physics: Conference Series 377 (2012) 012008, 25–30 September 2011, BARC, Mumbai.
Soma, Dutta and Mohammed , Yakub and Shubha, V (2012) Design and Modeling of Piezo MEMS Pressure Sensor. In: Processing ISSS.
Anjana, Jain and Jayanth Kumar, S and Srikanth, S and Rathod, VT and Mahapatra, D Roy (2012) Sensitivity of Polyvinylidene Fluoride Films to Mechanical Vibration Modes and Impact After Optimizing Stretching Conditions. Power Engineering and Science, 53 (4). pp. 1-9.
Gopalakrishna, K and Sivaprasad, K and Venkateswarlu, K and Harikumar, KC (2012) Microstructural evolution and aging behavior of cryorolled Al–4Zn–2Mg alloy. Materials Science and Engineering A, 535 . pp. 129-135. ISSN 0921-5093
Gopi, B and Naga Krishna, N and Venkateswarlu, K and Sivaprasad, K (2012) Influence of Rolling Temperature on Microstructure and Mechanical Properties of Cryorolled Al-Mg-Si alloy. World Academy of Science, Engineering and Technology, 61 .
Gopi, B and Nagakrishna, N and Sivaprasad, K and Venkateswarlu, K (2012) Effect of rolling temperature on microstructure and mechanical Properties of cryorolled Al-Mg-Si Alloy Reinforced with 3wt% TiB2 in-situ Composite. Advanced Materials Research, 584 . pp. 556-560.
Gopi, B and Nagakrishna, N and Venkateswarlu, K and Sivaprasad, K (2012) Influence of rolling temperature on microstructure and mechanical properties of cryorolled Al-Mg-Si alloy. World Academy of Science, Engineering and Technology, 61 . pp. 731-735.
Krishnan, GS and Burkanudeen, A and Murali, N and Phadnis, H (2012) Facile synthesis of stereoregular carbon fiber precursor polymers by template assisted solid phase polymerization. eXPRESS Polymer Letters, 6 (9). pp. 729-738. ISSN 1788-618X
Krishnan, GS and Burkanudeen, A and Murali, N and Phadnis, H (2012) Studies on molecular weight distribution of carbon fiber polymer precursors synthesized using mixed solvents. Chinese Journal of Polymer Science, 30 (5). pp. 664-673.
Manohar , HR and Chandrashekharaiah, TM and Venkateswarlu, K and Kori, SA (2012) Dry sliding wear response of A413 alloy:Influence of intermetallics and test parameters. Tribology International, 51 . pp. 54-60. ISSN 0301-679X
Panda, PK and Sahoo, B (2012) Preparation and characterization of barium titanate nanofibers by electrospinning. Ceramic International, 38 (6). pp. 5189-5193.
Panda, PK and Sahoo, B and Raja, S and Vijayakumar, MP and Shankar, V (2012) Electromechanical and Dynamic Characterization of In-House-Fabricated Amplified Piezo Actuator. Smart Materials Research, 2012 .
Panda, PK and Sahoo, B and Raja, S and Vijayakumar, MP and Shankar, V (2012) Electromechanical and Dynamic Characterization of In-House-Fabricated Amplified Piezo Actuator. Smart Materials Research .
Panda, PK and Sahoo, B and Raja, S and Vijayakumar, MP and Shankar, V (2012) Electromechanical and dynamic characterization of in-house-fabricated amplified piezo actuator. Smart Materials Research, 2012 .
Pandey, SC and Joseph, MA and Pradeep, MS and Raghavendra, K and Ranganath, VR and Venkateswarlu, K and Langdon, TG (2012) Theoretical and experimental evaluation of repetitive corrugation and straightening: Application to Al–Cu and Al–Cu–Sc alloys. Materials Science and Engineering A, 534 . pp. 282-287. ISSN 0921-5093
Patil, DC and Kori, SA and Venkateswarlu, K and Das, G and Alhajeri, SN and Langdon, TG (2012) Using ball indentation to determine the mechanical properties of an Al-7475 alloy processed by high-pressure torsion. Journal of Materials Science . pp. 1-7. ISSN 0022-2461
Sahoo, B and Panda, PK (2012) Fabrication of Simple and Ring-Type Piezo Actuators and Their Characterization. Smart Materials Research . pp. 1-4.
Sahoo, B and Panda, PK (2012) Fabrication of simple and ring-type Piezo Actuators and their characterization. Smart Materials Research, 2012 .
Sathish, S and Geetha, M and UdayaKumar, A and Senthil Kumar, S (2012) Granulation of Nano Alumina Powder for Improved Flowability by Spray Drying. Transactions of the Indian Institute of Metals, 65 (5). pp. 485-490. ISSN 0019-493X
Singh, AK and Andrault, Denis and Bouvier, Pierre (2012) X-ray diffraction from stishovite under nonhydrostatic compression to 70 GPa: Strength and elasticity across the tetragonal - orthorhombic transition. Physics of the Earth and Planetary Interiors, 208-20 . pp. 1-10.
Sivagnanapalani, P and Gouthama, - and Sujata, M (2012) Elemental Distribution Characteristics Across γ-TiAl:TiAlV Diffusion Bond Interface. Materials Science Forum, 702-70 . pp. 718-721.
Suresh, KS and Dong Lk, Kim and Bhaumik, SK and Satyam, Suwas (2012) Interrelation of grain boundary microstructure and texture in a hot rolled Ni-rich NiTi alloy. Scripta Materialia, 66 . pp. 602-605.
Suresh Kumar, M and Raghavendra, K and Venkataswamy, MA and Ramachandra, HV (2012) Fractographic Analysis of Tensile Failures of Aerospace Grade Composites. Materials Research, 15 (6). pp. 990-997.
Suresh Kumar, M and Ambresha, M and Venkateswarlu, K and Ranganath, VR (2012) Hot deformation behavior of as cast Al-3Mg-0.25Sc alloy. Project Report. National Aerospace Laboratories, Bangalore.