Browse by Department

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators Name | Item Type | No Grouping
Number of items: 27.

Conference or Workshop Item

Babu Rao, D and Baskey, D and Rawat, RS (2009) Water Jet Cutter: An Efficient Tool for Composite Product Development. In: National Conference on Scientific Achievements of SC & ST Scientits & technologists, 14-16 April 2009, Bangalore.

Dayananda, GN and Kamalakannan, GM and Senthil Kumar, P and Jayasankar, S and Satisha, - (2009) A smart material based approach to morphing. In: MAV Workshop- Challenges and Presferred Outcomes, 13 November 2008, National Aerospace Laboratories.

Kamalakannan, GM and Gupta, Amit Kumar (2009) An improved technique and its implementation for control of high power heaters in large autoclaves and similar plants. In: International Conference of Instrumentation, ICI-2009, 2009, Pune, India.

Polagangu , James and Murali Krishna, D and Gaddikeri, KM and Byji, Varughese (2009) Finite Element Analysis of Inter Spar Ribs of Composite Wing of Light Transport Aircraft against Brazier Load. In: National Conference Scientific Achievements of SC & ST Scientists & Technologists, 14-16 April 2009, Bangalore.

Ramanaiah, B and Ramachandra, HV and Sanjeev Kumar, S and Kotresh, Gaddikeri M and Byji, Varughese and Ramesh, Sundaram and Kamath, GM and Subba Rao, M (2009) Challenges in Static Testing of Co-Cured Co-Bonded Composite Aircraft Structures. In: Natonal Conference on Scientific Achievements of SC & ST Scientisits and Technologists, 14-16 April 2009, Bangalore.

Srinivasa, V and Sanjeev Kumar, S and Ramesh Kumar, M and Sudheendra, HN and Madhava, MR (2009) Non-Destructive Evaluation—A Pivotal Technology for Qualification of Composite Aircraft Structures. In: National Conference on Scientific Achievements of SC & ST Scientific & Technologists, 14-16 April 2009, Bangalore.

Thulasi Durai, D and Viswamurthy , SR and Byji, Varughese and Dayananda, GN and Subrahmanya, MB and Kulkarni, DS and Rajani, BN and Mathur, JS (2009) Optimized construction of a composite MAV wing using CFD analysis. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2009), 10-12 December 2009, Bangalore.

Venkataswamy, MA and Raghavendra, K and Suresh Kumar, M and Ramachandra, HV (2009) Fractographic Analysis of Unidirectional Carbon Fiber Reinforced Plastic (CFRP) Composite Laminates Failed under Compression Loads. In: National Conference on Scientific Achievements of SC ST Scientists and Technologists, 14-16 April 2009, Bangalore.

Journal Article

Balamurugan, R and Biswanath, Mondal and Sukamal, Ghosh (2009) Optimisation of machining parameters for hard machining: grey relational theory approach and ANOVA. International Journal of Advanced Manufacturing Technology, 45 (11-12). pp. 1068-1086. ISSN 1068-1086

Gupta, Nitesh and Ramesh, Sundaram (2009) Fiber Optic Sensors for Monitoring Flow in Vacuum Enhanced Resin Infusion Technology VERITy Process. Composites Part A: applied Science and Manufacturing, 40 . pp. 1065-1070. ISSN 1359-835X

Nitesh, Gupta and Ramesh, Sundaram (2009) Fiber optic sensors for monitoring flow in vacuum enhanced resin infusion technology (VERITy) process. Composites Part A: applied Science and Manufacturing, 40 (8). pp. 1065-1070. ISSN 1359-835X

Proj.Doc/Technical Report

Dayananda, GN and Senthil Kumar, P and Ramachandra , HV and Jayasankar, S and Satisha, - (2009) Inve~tigation~oThf ermo-Mechanical Characteristics of Thin Shape Memory Alloy (Ni-Ti) Wires. Project Report. National Aerospace Laboratories, Bangalore.

Govindan, Kutty M and Saravana, Kumar N and Lohith, N and Sudheendra, HN and Subbarao, M (2009) Master process sheets for fabrication of CFC centre fuselage parts for TEJAS (Light Combat Aircraft). Technical Report. NAL.

Govindan, Kutty M and Saravana, Kumar N and Naik, BN and Saji, D and Sudheendra, HN and Subbarao, M (2009) Master process sheets for fabrication of CFC centre Fuselage parts for TEJAS (Light Combat Aircraft) - part-5. Technical Report. NAL.

Govindan, Kutty M and Saravana, Kumar N and Ramesh, Sundaram and Sudheendra, HN and Subbarao, M (2009) Master process sheets for fabrication of CFC centre fuselage parts for TEJAS (Light Combat Aircraft) - part-4. Technical Report. NAL.

Manisha, Banker M and Kotresh, Gaddikeri M and Byji, Varughese (2009) Global finite element analysis of SARAS composite wing for fuel pressure. Technical Report. NAL.

Manisha, Banker M and Kotresh, Gaddikeri M and Byji , Varughese and Subharao, M (2009) Finite Element Analysis of SARAS Wing Test Box Addressing Manufacturing Deviations. Technical Report. NAL, Bangalore.

Moorthy, Emayavaramba MV and Saji, D and Ravi, Kumar P (2009) Quality assurance (QA) document for composite components of Tejas-Light Combat Aircraft (LCA). Technical Report. NAL.

Pitchai, P and Gowda, MNN and Subba Rao, M (2009) Assembly process sheets for composite co-cured FIN of Tejas-Light Combat Aircraft (LCA). Technical Report. NAL.

Ramaswamy, Setty J and Christopher, Daniel and Venkatesh, S and Byji, Varughese and Dayananda, GN (2009) Assembly process sheets for composite co-cured FIN of Tejas-light combat aircraft (LCA). Technical Report. NAL.

Ramaswamy, Setty J and Dayananda, GN (2009) Design aspects of nitrogen reservoirs. Technical Report. NAL.

Ramaswamy, Setty J and Venkatesh, S and Dayananda, GN and Daniel, J Christopher and Varughese, Byji (2009) Mechanical Design Aspects of 4.9 m Dia., 13 m Length Computer Controlled Autoclave. Project Report. National Aerospace Laboratories.

Ramesh, Sundaram et. al. (2009) Workshop on repair technology for composite structures- lecture notes-Vol.1 (Theory). Technical Report. NAL.

Ravi, Kumar P and Sathish, Nimbal S and Sudheendra, HN and Subbarao, M (2009) Master process sheets for fabrication of CFC centre fuselage parts of TEJAS (Light Combat Aircraft): part-3. Technical Report. NAL.

Shuresh Chand, Jangir and Srinivasa, V and Ramachandra, H V and Ramesh Kumar, M and Sudheendra, H N (2009) Qualification of composite components of tejas (LCA): non-destructive evaluation. Technical Report. NAL.

Siddeshwar, (2009) Workshop on repair technology for composite structures Vol.II (Practicals). Technical Report. NAL.

Thulasi Durai, D and Venkatesh, S and Byji, Varughese and Ramanaiah, B and Dayananda, GN (2009) Concepts for truss based aerofoil constructions. Technical Report. NAL.

This list was generated on Sat Nov 1 01:12:10 2014 IST.