Items where Author is "Venkateswarlu, K"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 27.

Journal Article

Sekhar, Chandra K and Narayanasamy, R and Venkateswarlu, K (2014) Formability, fracture and void coalescence analysis of a cryorolled Al-Mg-Si alloy. Materials and Design, 57 . pp. 351-359. ISSN 0261-3069

Suresh Kumar, M and Ambresha, M and Venkateswarlu, K and Ranganath, VR (2014) High temperature deformation behavior of As-Cast Al-3Mg-).25Sc alloy. Metallurgical and Materials Transactions A . xxx-1-xxx-5. ISSN 1073-5623

Vanarotti, M and Shrishail, P and Sridhar, BR and Venkateswarlu, K and Kori, SA (2014) Surface Modification of SiC Reinforcements & Its Effects on Mechanical Properties of Aluminium Based MMC. Applied Mechanics and Materials, 446-44 . pp. 93-97. ISSN ISSN: 1662-7482

UdayaKumar, A and Stalin, M and Venkateswarlu, K (2013) Effect of CVD SiC seal coating on the mechanical properties of Cf /SiC composites generated through CVI. Surface and Coatings Technology . pp. 1-26. ISSN 0257-8972

Vanarotti, M and Venkateswarlu, K and Kori, SA and Sridhar, BR and Padasalgi, SB (2013) Effect of Ni coating on SiC particles to synthesize Al based Metal Matrix Composites. International Journal of Science Research, 01 (4). pp. 405-409. ISSN 2319-7064

Manohara, HR and Chandrashekharalah, TM and Venkateswarlu, K and Kori, SA (2013) Sliding wear performance of reinforced A413 alloy at elevated temperatures. International Journal of Advanced Manufacturing Technology, 65 . pp. 395-402. ISSN 1068-1086

Krishna, NN and Tejas, R and Sivaprasad, K and Venkateswarlu, K (2013) Study on cryorolled Al–Cu alloy using X-ray diffraction line profile analysis and evaluation of strengthening mechanisms. Materials and Design, 52 . pp. 785-790. ISSN 0261-3069

Patil, DC and Kori, SA and Venkateswarlu, K and Das, G and Alhajeri, SN and Langdon, TG (2012) Using ball indentation to determine the mechanical properties of an Al-7475 alloy processed by high-pressure torsion. Journal of Materials Science . pp. 1-7. ISSN 0022-2461

Manohar , HR and Chandrashekharaiah, TM and Venkateswarlu, K and Kori, SA (2012) Dry sliding wear response of A413 alloy:Influence of intermetallics and test parameters. Tribology International, 51 . pp. 54-60. ISSN 0301-679X

Gopi, B and Nagakrishna, N and Sivaprasad, K and Venkateswarlu, K (2012) Effect of rolling temperature on microstructure and mechanical Properties of cryorolled Al-Mg-Si Alloy Reinforced with 3wt% TiB2 in-situ Composite. Advanced Materials Research, 584 . pp. 556-560.

Gopi, B and Naga Krishna, N and Venkateswarlu, K and Sivaprasad, K (2012) Influence of Rolling Temperature on Microstructure and Mechanical Properties of Cryorolled Al-Mg-Si alloy. World Academy of Science, Engineering and Technology, 61 .

Gopi, B and Nagakrishna, N and Venkateswarlu, K and Sivaprasad, K (2012) Influence of rolling temperature on microstructure and mechanical properties of cryorolled Al-Mg-Si alloy. World Academy of Science, Engineering and Technology, 61 . pp. 731-735.

Gopalakrishna, K and Sivaprasad, K and Venkateswarlu, K and Harikumar, KC (2012) Microstructural evolution and aging behavior of cryorolled Al–4Zn–2Mg alloy. Materials Science and Engineering A, 535 . pp. 129-135. ISSN 0921-5093

Pandey, SC and Joseph, MA and Pradeep, MS and Raghavendra, K and Ranganath, VR and Venkateswarlu, K and Langdon, TG (2012) Theoretical and experimental evaluation of repetitive corrugation and straightening: Application to Al–Cu and Al–Cu–Sc alloys. Materials Science and Engineering A, 534 . pp. 282-287. ISSN 0921-5093

Rajinikanth, V and Venkateswarlu, K and Sen, Mani Kuntal and Das, M and Alhajeri, SN and Langdon, TG (2011) Influence of scandium on an Al–2% Si alloy processed by high-pressure torsion. Materials Science and Engineering , 528 . pp. 1702-1706.

Venkateswarlu, K and Rajinikanth, V and Sen, Mani Kuntal and Alhajeri, SN and Langdon, TG (2010) Application of High-Pressure Torsion to Al-Si Alloys with and without Scandium Additions. Materials Science Forum, 667 - . pp. 743-748.

Venkateswarlu, K and Rajinikanth, V and Ajoy Kumar, Ray and Cheng, XU (2010) The characteristics of aluminum–scandium alloys processed by ECAP. Materials Science and Engineering A, 527 . pp. 1448-1452.

Sudagar, Jothi and Venkateswarlu, K and Lian, Jainshe (2010) Dry sliding wear properties of a 7075-T6 aluminum alloy coated with Ni-P (h) in different pretreatment conditions. Journal of Materials Engineering and Performance, 19 (6). pp. 810-818. ISSN 1059-9495

Venkateswarlu, K and Suman , Saurabh and Rajinikanth, V and Ranjan Kumar, Sahu and Ajoy Kumar, Ray (2010) Synthesis of TiN Reinforced Aluminium Metal Matrix Composites Through Microwave Sintering. Material Engineering and Performance, 19 . pp. 231-236. ISSN 1059-9495

Venkateswarlu, K and Rajinikanth, V and Ray, AK and Xu, Cheng (2010) Effect of a scandium addition on an Al-2% Si alloy processed by ECAP. Reviews on Advanced Materials Science, 25 . pp. 99-106. ISSN 1605-8127

Krishna, KG and Singh, Nidhi and Venkateswarlu, K and Kumar, KC Hari (2010) Tensile Behavior of Ultrafine-Grained Al-4Zn-2Mg Alloy Produced by Cryorolling. Journal of Materials Engineering and Performance, 20 (9). pp. 1569-1574. ISSN 1059-9495

Jothi, S and Venkateswarlu, K and Jainshe, L (2009) Dry Sliding Wear Properties of a 7075-T6 Aluminum Alloy Coated with Ni-P (h) in Different Pretreatment Conditions. Journal of Materials Engineering and Performance . ISSN 1059-9495

Venkateswarlu, K and Rajinikanth, V and Naveen, T and Dhiraj Prasad, Sinha and Atiquzmann, S and Ajoy Kumar, Ray (2009) Abrasive wear behavior of thermally sprayed diamond reinforced composite coating deposited with both oxy-acetylene and HVOF techniques. wear, 266 . pp. 995-1002.

Venkateswarlu, K and Rajiniknath, V and Ajoy kumar, R and Cheng, XU and Terence , GL EFFECT OF A SCANDIUM ADDITION ON AN Al-2% Si ALLOY PROCESSED BY ECAP. Reviews onAdvanced Materials, 25 . pp. 99-106.

Suresh Kumar, R and Sivakumar, D and Venkateswarlu, K and Gandhi, AS Mechanical behavior of molybdenum disilicide reinforced silicon carbide composites. Scripta Materialia , 65 (9). pp. 838-841. ISSN 1359-6462

Proj.Doc/Technical Report

Suresh Kumar, M and Ambresha, M and Venkateswarlu, K and Ranganath, VR (2012) Hot deformation behavior of as cast Al-3Mg-0.25Sc alloy. Project Report. National Aerospace Laboratories, Bangalore.

Stalin, M and Venkateswarlu, K and Sridhar, MK High temperature flexural testing of ceramic materials. Technical Report. National Aerospace Laboratories, Bangalore. (Unpublished)

This list was generated on Thu Jul 31 01:30:27 2014 IST.