Items where Author is "Subba Rao, M"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 45.

James, P and Gaddikeri, KM and Varughese, Byji and Subba Rao , M (2014) Realisation of Shear Flow at Crucial Spar Splice Joints of Composite Wing in Idealised Wing Test Box. In: ICONS-2014: International Conference on Structural Integrity, 04 Feb 2014, IG CAR: Indira Gandhi Centre for Atomic Research, Kalpakkam, Tamilnadu, India.

Pitchai, P and Gowda, MNN and Subba Rao, M (2009) Assembly process sheets for composite co-cured FIN of Tejas-Light Combat Aircraft (LCA). Technical Report. NAL.

Ramanaiah, B and Ramachandra, HV and Sanjeev Kumar, S and Kotresh, Gaddikeri M and Byji, Varughese and Ramesh, Sundaram and Kamath, GM and Subba Rao, M (2009) Challenges in Static Testing of Co-Cured Co-Bonded Composite Aircraft Structures. In: Natonal Conference on Scientific Achievements of SC & ST Scientisits and Technologists, 14-16 April 2009, Bangalore.

Kamalakannan, GM and Subba Rao, M and Chandra, K and Abhilash, P (2008) Advanced hot bonding system for repair of Aerospace Structures. In: Proceedings of the INCCOM-7, Dec. 4-5, 2008, Bangalore, India.

Dayananda, GN and Subba Rao, M (2008) Effect of strain rate on properties of superelastic NiTi thin wires. Materials Science and Engineering: A Struct. Mater., 486 (1-2). pp. 96-103.

Senthil Kumar, P and Dayananda, GN and Saji, D and Kamalakannan, GM and Subba Rao, M (2008) Aircraft Structural Repair Technology Using Smart Actuators. Project Report. National Aerospace Laboratories, Bangalore.

Varughese, Byji and Dayananda, GN and Subba Rao, M (2008) Modeling the behaviour of an advanced material based smart landing gear system for aerospace vehicles. In: International Workshop on quot;Smart deeling of Material Systems (SDMoMS'08), Jan 2008, Chennai, India.

James, P and Kotresh, Gaddikeri M and Murali Krishna, D and Ramanaiah, B and Varughese, Byji and Subba Rao, M (2008) Design of spar slice joints in composite wing structures. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-044), 26-28 Jun 2008, Bangalore, India.

Rawat, RS and Karuppannan, D and Dharmappa, BL and Subba Rao, M (2008) Development of a co-cured composite torque shaft for rudder of high speed aircraft. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-043), 26-28 Jun 2008, Bangalore, India.

Kamath, GM and Khatkhate, A and Subba Rao, M (2007) Sensor failure detection using a combined artificial neural network and finite element analysis approach. In: 2nd ISSS National Conference on MEMS, Microsensors, Smart Materials, Structures and Systems, Nov 2007, Pilani, India.

Murali Krishna, D and Ramanaiah, B and James, P and Gaddikeri, KM and Varughese, Byji and Subba Rao, M (2007) Experimental investigation on a mechanically fastened splice joint in a composites aircraft wing. In: 15th National Conference on Aerospace Structures, 15-16 Oct 2007, Coimbatore, Tamil Nadu, India.

Kamath, GM and Ramanaiah, B and Verma, KK and Subba Rao, M (2007) Static environmental testing of a co-cured aircraft wing test box. In: Proceedings of the National Seminar on Aerospace Structures, Sep 2007, Coimbatore, Tamil Nadu, India.

Chandra, Satish and Ramachandra, S and Kamath, GM and Dayanidhi, J and Petley, Vijay and Ramanaiah, B and Salem, Stanley C and Gowda, MNN and Subba Rao, M (2007) Experimental investigations on composites, fibre-metal and metal coupons for high velocity bird impacts. In: Proceedings of the National Seminar on Aerospace Structures, Sep 2007, Coimbatore, Tamil Nadu, India.

Senthil Kumar, P and Kamath, GM and Subba Rao, M (2007) Signal Processing and Spectral AnaTysTs Using dSPACE DS1102 DSP Board. Project Report. National Aerospace Laboratories, Banglaore.

Jayasankar, S and Dayananda, GN and Senthil Kumar, P and Subba Rao, M (2007) tvaluation of Properties of SMA and SMA Embedded 3t.c-1,{*. FRP Beams. Project Report. National Aerospace Laboratories, Bangalore.

Ramaswamy, Setty J and Dayananda, GN and Subba Rao, M (2007) Development of a Door Steering Mechanism for a Large Autoclave. In: National Conference on Recent Advances in Design Engineering, 22-24 Feb 2007, Manipal.

Dayananda, GN and Varughese, B and Subba Rao, M (2007) Shape memory alloy based smart landing gear for an airship. Journal of Aircraft, 44 (5). pp. 1469-1477.

Kamath, GM and Ramanaiah, B and Verma, KK and Subba Rao, M (2007) Static Environmental Testing of a Cocured Aircraft Wing Test Box. In: 15th National Conference on Aerospace Structures, 15-16 Oct 2007, Coimbatore, Tamil Nadu, India.

Kamalakannan, GM and Subba Rao, M (2006) Design and development of cure controller for bonded repair of aircraft structures13; 13;. Technical Report. National Aerospace Laboratories, Bangalore, India.

Veera Sesha Kumar, C and Ramachandra, HV and Varughese, Byji and Kotresh, Gaddikeri M and Ramesh, Sundaram and Subba Rao, M (2006) Damage Growth Studies on Composite Flap Structures Under Fatigue Loading. In: XIV National Seminar on Aerospace Structures, 30-31 January 2006, Visvesvaraya National Institute of Technology, Nagpur.

Sanjeev Kumar, S and Ramanaiah, B and Sudheendra, HN and Kamath, GM and Subba Rao, M (2006) Application of Acoustic Emission to Study Debond Growth in Co-cured/Co-bonded Composite Structures under Fatigue Loading. In: Proceedings of the 14th National Seminar on Aerospace Structures: Fatigue, Fracture and Ageing Structures, 30-31 Jan 2006, Nagpur, India.

Senthil Kumar, P and Dayananda, GN and Kamalakannan, GM and Saji, D and Pruthvi, S and Subba Rao, M (2006) Preliminary Design and Fabrication Report on Repair Technology using Smart Actuators. Project Report. National Aerospace Laboratories, Bangalore.

Jayasankar, S and Dayananda, GN and Sandeep, CD and Subba Rao, M (2006) Preliminary Hesign and Fabrication - :a1 of SMA Embedded GFRP Beam . Project Report. National Aerospace Laboratories, Bangalore.

Varughese, Byji and Kishore, A and Radhakrishna, K and Subba Rao, M (2005) Buckling and Postbuckling studies on stiffened composite13; panels with circular cutouts. In: Isampe National Conference on Composites / INCCOM IV, 9-10 Dec 2005, Coimbatore, India.

Kamalakannan, GM and Subba Rao, M (2004) Development of a computer based process control system for an autoclave to cure polymer matrix composites. In: Proceedings of International conference on Instrumentation, 2004, Pune, India.

Shankar, V and Dayananda, GN and Kumar, Senthil P and Subba Rao, M and Balasubramaniam, R (2002) Development of electronic actuation system for shape-memory-alloy-based aerospace structures. In: Conference on Smart Materials, Structures and Systems, 12-14 Dec 2002, Bangalore, India.

Subba Rao, M and Gowda, MNN (2002) Development of fin for LCA using advanced composites. Journal of the Aeronautical Society of India, 54 (2). pp. 106-108. ISSN 0001-9267

Farook, MA and Gopalan, R and Subba Rao, M and Ramanaiah, B and Prabhakaran Nair, O and Suseela, GR and Ramachandra, HV (1996) Structural static testing of LCA rudder. Project Report. National Aerospace Laboratories, Bangalore.

Subba Rao, M and Jharia, Anoop (1996) Finite Element Analysis of Radome for Mirage (ABD) 2000. Project Report. National Aerospace Laboratories, Bangalore.

Subba Rao, M and Dayananda, GN (1995) Design Features of Autoclave Sub-Systems. Technical Report. National Aerospace Laboratories, Bangalore, India.

Jayasurya, M and Viswanathan, KS and Subba Rao, M (1990) Fabrication of composite wing box for lightning studies. Project Report. National Aerospace Laboratories, Bangalore.

Rajakumar, A and Jharia, Anoop and Subba Rao, M (1990) A preliminary report on LCA fin design13; 13;. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Joshi, SC and Subba Rao, M and Murthy, MVV (1990) FEM analysis of GFRP single cell test beam and modified GFRP bridge deck. Project Report. National Aerospace Laboratories, Bangalore.

Jayasurya, M and Viswanathan, KS and Subba Rao, M (1990) Fabrication of GFRP bridge deck plate using soft tools. Project Report. National Aerospace Laboratories, Bangalore.

Venkatachalam, K and Krishnan, A and Rangarajan, V and Rajagopalan, E and Subba Rao, M and Haque, CI and Mohan, KH (1990) Draft proposal for establishment of CNC centre at NAL. Project Report. National Aerospace Laboratories, Bangalore.

Guruprasad, K and Subba Rao, M and Chandra, Ramesh (1988) Finite element analysis of composite rudder for DO 228 Aircraft 13; 13;. In: Composite Materials and Structures, 6-9 Jan 1988, Madras, India.

Viswanathan, KS and Jayasurya, M and Subba Rao, M (1988) Fabrication of Composite parts of composite rudder for a typical military aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Guruprasad, K and Subba Rao, M and Chandra, Ramesh (1986) Finite element analysis of composite rudder for DO 228 aircraft. Technical Report. National Aerospace Laboratory, Bangalore, India.

Subba Rao, M and Chandra, Ramesh (1986) Preliminary design of composite rudder for Do-228 aircraft x2013; part II. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Bapu Rao, MN and Subba Rao, M and Sethuraman, Geetha and Suseela, GR (1986) Improved procedure for the determination of apparent strain. Nuclear Engineering and Design, 92 (1). pp. 27-36. ISSN 0029-5493

Subba Rao, M and Ramesh Chandra, . (1986) Preliminary Design of Composite Rudder for MiG-21 Aircraft Part II. Project Report. National Aerospace Laboratories, Bangalore.

Subba Rao, M and Chandra, Ramesh and Piening, M (1985) Preliminary design of composite rudder for DO-228 aircraft x2013; part I. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Subba Rao, M and Chandra, Ramesh (1984) Experimental investigation of behaviour of a typical riveted finite joint. In: Analysis of Structures - A Commemorative volume published on the occasion of the 60th Anniversary of Dr. S.R.Valluri, Dec 1984, NAL, Bangalore, India.

Stanley , C Salem and Gowda, MNN and Ramachandra, HV and Kamath, GM and Subba Rao, M Development of CGLARE: Design, Fabrication and Characterisation. In: INCOMM 6, 12-14 December,2007, IIT Kanpur.

Radhakrishnan, G and Dinesh, BL and Srinivasa rao, A and Kotresh, Gaddikeri M and Sudheendra, HN and Subba Rao, M Master process sheets for fabrication of CFC centre fuselage parts of TEJAS (Light Combat Aircraft): part-2. Technical Report. NAL.

This list was generated on Fri Aug 26 03:47:39 2016 IST.