Items where Author is "Rao, RMVGK"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 165.

Conference or Workshop Item

Sugun, BS and Rao, RMVGK and Venkatasubramanyam, D (2008) Cost-effective approach for the manufacture of fibre metal laminates (FML). In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-041), 26-28 Jun 2008, Bangalore, India.

Mathur, AC and Somasekhar, BSM and Kumar, Mohan and Srikanth, L and Kumar, Rahul and Venkatsubramanium, D and Rao, RMVGK (2008) Development of a metalised carbon fiber reinforced plastic (CFRP) antenna reflector for satellite communication. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-042), 26-28 Jun 2008, Bangalore, India.

Rao, Sandhya and Rao, RMVGK (2008) An emerging, energy-efficient cure process for rapid composite manufacture. In: Proceedings of the International Conference on Aerospace Science and Technology (INCAST 2008-032), 26-28 Jun 2008, Bangalore, India.

Rao, RMVGK (2006) Nanomodified fibre reinforced polymer composites and adhesives: What needs to be done? In: ASME 2006 Multifunctional Nanocomposites International Conference (MN2006) , Sept 20–22, 2006 , Honolulu, Hawaii, USA.

Driscoll, Stephen Burke and Rao, RMVGK (1989) Rheological Properties and Impact Behavior Multi-component Thermoplastic Composites. In: 5th Annual ASM/ESD Advanced Composites Conference, 26 Sept 1989, Dearborn.

Sugun, BS and Rao, RMVGK Impact Damage Tolerance Assessment in Polymer Composites : A New Approach. In: ICRACM 07, Feb. 07, New Delhi, India.

Subramaniam, C and Padma, A and Rao, RMVGK Studies on Aromatic Amine-Epoxy Novolac Systems. In: International Conference organised by RAPRA Technology Limited, March 22-23, 1990, Shropshire, England.

Journal Article

Padmavathi, T and Naidu, SV and Rao, RMVGK (2012) Studies on mechanical behavior of surface modified sisal fibre - Epoxy composites. Journal of Reinforced Plastics and Composites, 31 (8). pp. 519-532. ISSN 0731-6844

Padmavathi, T and Venkatanaidu, S and Rao, RMVGK (2012) Characterisation studies on Mercerised Sisal Fibers for Composite Applications. Journal of Polymer Materials, 29 (2). pp. 261-272.

Jyotsna Kiran, Mathad and Rao, RMVGK (2012) Characterization Studies on (Polypyrrole/Fe3O4 Polyurethane Nanocomposite Conductive films. Journal of Polymer Materials, 29 (1). pp. 127-136.

Srikanth, L and Rao, RMVGK (2011) Concurrent studies on Braided and Filament wound carbon fibre composites - a comparative appraisal. Concurrent studies on braided and filament wound carbon fibre composites - a comparative appraisal, 30 (16). pp. 1359-1365.

Jyotana Kiran, Mathad and Rao, RMVGK (2011) Studies on Highly Conducting Polypyrrole/Fe3O4 Nanocomposites. Polymer Composites .

Sugun, BS and Rao, RMVGK (2009) Impactor Mass effects in polymer Matrix Composites under Low Velocity Conditions: A Repeated Drops Test Approach. lnternational Journal of Mechanical Engineering and Materials Sciences, 2(1) June 2009 .

Rao, Sandhya and Rao, RMVGK (2008) Cure studies on bifunctional epoxy matrices using a domestic microwave oven. Polymer Testing, 27 (5). pp. 645-652.

Vanaja, A and Padmavathi, T and Rao, RMVGK and Jyotsna, T.S (2008) Phenolic novolac IPNs for High Performance Composite Applications. International Journal of Mechanical Engineering and Materials Sciences, 1 (2). pp. 123-127.

Bhagyashekar, MS and Rao, RMVGK (2007) Effects of material and test parameters on the wear behavior of particulate filled composites Part 1: SiC-epoxy and 13; Gr-epoxy composites. Journal of Reinforced Plastics and Composites, 26 . pp. 1753-1768.

Pradeep, D and Reddy, N Janardhana and Kumar, C Rahul and Srikanth, L and Rao, RMVGK (2007) Studies on mechanical behavior of glass epoxy composites with induced defects and correlations with NDT characterization parameters. Journal of Reinforced Plastics and Composites, 26 (15). pp. 1539-1556.

Rao, RMVGK and Rao, Sandhya and Sridhara, BK (2006) Studies on tensile and interlaminar shear strength properties of thermally cured and microwave cured glass-epoxy composites13;. Journal of Reinforced Plastics and Composites, 25 (7). pp. 783-795.

Murthy, Onkar and Munirudrappa, N and Srikanth, L and Rao, RMVGK (2006) Strength and stiffness optimization studies on honeycomb core sandwich panels13;. Journal of Reinforced Plastics and Composites, 25 (6). pp. 663-671.

Nirmal, C and Maithi, SN and Padmavathi, T and Vanaja, A and Rao, RMVGK (2006) Studies on hydroxyl terminated polybutadiene toughened phenolic resin13;. High Performance Polymers, 18 (1). pp. 57-69.

Raju, M and Reddy, CR and Narasimha Swamy, MR and Giridhar, G and Srikanth, L and Rajendra Prakash, M and Rao, RMVGK (2006) Repair Effectiveness Studies on Impact Damaged Sandwich Composite Constructions. Journal of Reinforced Plastics and Composites, 25 (1). ISSN 0731-6844

Rahul Kumar, C and Radhakrishna, K and Rao, RMVGK (2005) Postcuring effects on impact behavior of glass/epoxy composite laminates. Journal of Reinforced Plastics and Composites, 24 (9). pp. 949-960. ISSN 0731-6844

Revathi, A and Prakash, M.Rajendra and Singh, AK and Mahale, Santhosh and Srihari, Shylaja and Rao, RMVGK (2004) Hot-Wet Property Characterisation of a High-Temperature Cured Glass–Epoxy Composite in Immersion Environment. Journal of Reinforced Plastics and Composites, 23 (17). pp. 1884-1892. ISSN 0731-6844

Mahale, Santhosh and Rajamani, Deepika and Revathi, A and Prakash, M.Rajendra and Srihari, Shylaja and Rao, RMVGK (2004) Hot-wet property characterisation of a high-temperature cured glass-epoxy composite in immersion environment. Journal of Reinforced Plastics and Composites, 23 (17). pp. 1883-1892. ISSN 0731-6844

Sugun, BS and Rao, RMVGK (2004) Impactor Mass Effects in Glass-Epoxy Composites Subjected to Repeated Drop Tests. Journal of Reinforced Plastics and Composites, 23 (14). pp. 1547-1560.

Datta, S and Krishna, AV and Rao, RMVGK (2004) Low velocity impact damage tolerance studies on glass-epoxy laminates - Effects of material, process and test parameters. Journal of Reinforced Plastics and Composites, 23 (3). pp. 327-345.

Sugun, BS and Rao, RMVGK (2004) Low-velocity Impact Characterization of Glass, Carbon and Kevlar Composites Using Repeated Drop Tests. Journal of Reinforced Plastics and Composites, 23 (15). pp. 1583-1599. ISSN 0731-6844

Revathi, A and Srihari, Shylaja and Rao, RMVGK (2004) Moisture Distribution Profiles in RT-Cured Glass/ Epoxy Laminates of Different Thicknesses. Journal of Reinforced Plastics and Composites, 23 (10). pp. 1075-1094. ISSN 0731-6844

Revathi, A and Srihari, Shylaja and Rao, RMVGK (2004) Moisture distribution profiles in RT-cured glass/epoxy laminates of different thicknesses. Journal of Reinforced Plastics and Composites, 23 (10). pp. 1075-1094.

Ashok Kumar, A and Alagar, M and Rao, RMVGK (2002) Synthesis and characterization of siliconized epoxy- 1, 3-bis(maleimido) benzene intercrosslinked matrix materials. Polymer, 43 . pp. 693-702.

Vanaja, A and Rao, RMVGK (2002) Fibre Fraction Effects on Thermal Degradation Behaviour of GFRP, CFRP and Hybrid Composites. Journal of Reinforced Plastics and Composites, 21 (15). pp. 1389-1398. ISSN 0731-6844

Srihari, Shylaja and Revathi, A and Rao, RMVGK (2002) Hygrothermal Effects on RT-Cured Glass-Epoxy Composites in Immersion Environments. Part A: Moisture Absorption Characteristics. Journal of Reinforced Plastics and Composites, 21 (11). pp. 983-993. ISSN 0731-6844

Srihari, Shylaja and Revathi, A and Rao, RMVGK (2002) Hygrothermal Effects on RT-Cured Glass-Epoxy Composites in Immersion Environments. Part B: Degradation Studies. Journal of Reinforced Plastics and Composites, 21 (10). pp. 993-1002. ISSN 0731-6844

Vanaja, A and Rao, RMVGK (2002) Synthesis and characterisation of epoxy-novolac/bismaleimide networks. European Polymer Journal, 38 (1). pp. 187-193.

Vanaja, A and Rao, RMVGK (2002) Synthesis and characterization of 1, 3-bis(maleimido) benzene-modified and 1, 6-bis(maleimido) hexane-modified epoxy-novolac interpenetrating networks. High Performance Polymers, 14 (4). pp. 363-382.

Kumar, A Ashok and Alagar, M and Rao, RMVGK (2001) Studies on thermal and morphological behavior of Siliconized Epoxy Bismaleimide Matrices. Journal of Applied Polymer Science, 81 . pp. 2330-2346.

Sugun, BS and Rao, RMVGK (2000) Mechanical behaviour of woven and multiaxial fabric composites. Journal of Reinforced Plastics and Composites, 19 (9). pp. 743-753.

Rao, RMVGK and Nahar, GA and Alagirusamy, R (2000) Mechanical properties of glass composites based on knitted preforms with inlays. Indian Journal of Fibre and Textile Research, 25 . pp. 115-120. ISSN 0971-0426

Segun, BS and Rao, RMVGK (2000) Drop Weight Impact Studies on Rib-Knit RTM Laminates. Journal of Reinforced Plastics and Composites, 19 (06). pp. 492-508. ISSN 0731-6844

Naveen, VP and Vani, A and Prakasha, V and Divakar, CJ and Ananthkrishnan, T and Rao, RMVGK (2000) Studies on mechanical behavior of knitted glass-epoxy composites. Journal of Reinforced Plastics and Composites, 19 (5). pp. 396-402. ISSN 0731-6844

Natarajan, Kandasamy and Kumar, Rao Prakash and Reddy, PV and Nanje Gowda, NM and Rao, RMVGK (2000) Thermal and toughness property studies on a polybenzimidazole-modified epoxy resin system. Polymer International, 49 . pp. 1321-1323.

Shetty, MR and Vijay Kumar, KR and Sudhir, S and Raghu, P and Madhuranath, D and Rao, RMVGK (1999) Effect of Fibre Orientation on Mode-I13; Interlaminar Fracture Toughness of Glass13; Epoxy Composites. Journal of Reinforced Plastics and Composites, 16 . pp. 1-15. ISSN 0731-6844

Srihari, Shylaja and Rao, RMVGK (1999) Hygrothermal Characterization and Diffusion Studies on Carbon/Epoxy composites. Journal of Reinforced Plastics and Composites, 18 (10). pp. 921-930. ISSN 0731-6844

Srihari, Shylaja and Rao, RMVGK (1999) Hygrothermal Charactrisation and DiffusionStudies on Glass Epoxy Composites. Journal of Reinforced Plastics and Composites, 18 (10). pp. 942-953. ISSN 0731-6844

Srihari, Shylaja and Rao, RMVGK (1999) Hygrothermal characterisation and diffusion studies on glass epoxy composites 13; 13;. Journal of Reinforced Plastics and Composites, 18 (10). pp. 942-953. ISSN 0731-6844

Srihari, Shylaja and Rao, RMVGK (1999) Hygrothermal characterization and diffusion studies on carbon /epoxy composites. Journal of Reinforced Plastics and Composites, 18 (10). pp. 921-930. ISSN 0731-6844

Rao, RMVGK and Pai, Raghavendra and Kamatha, MS (1997) Acid Resistance of Glass Fiber Composites with Different Layup Sequencing: Part I-Diffusion Studies. Journal of Reinforced Plastics and Composites, 16 (11). pp. 1002-1012. ISSN 0731-6844

Padma, A and Rao, RMVGK and Nagendrappa, G (1997) Effect of Prereaction on Curing of Elastomer-Modified Epoxy Resins. Journal of Applied Polymer Science, 65 . pp. 1751-1757. ISSN 0360-6834

Bijoysri, Khan and Rao, RMVGK and Venkataraman, N (1995) Low Velocity Impact Fatigue Studies on Glass Epoxy Composite Laminates with Varied Material and Test Parameters - Effect of Incident Energy and Fibre Volume Fraction. Journal of Reinforced Plastics and Composites, 14 . pp. 1150-1159. ISSN 0731-6844

Sainathan, N and Padmanabhan, K and Sashidhara, S and Rao, RMVGK and Kishore, - (1995) Influence of Particulate Graphite Additions on the Shear Related Behaviour of Glass Fabric Reinforced Epoxy Composites. Journal of Reinforced Plastics and Composites, 14 . pp. 445-457. ISSN 0731-6844

Padma, A and Rao, RMVGK and Subramaniam, C and Nagendrappa, G (1995) Cure characterization of triglycidyl epoxy/aromatic amine systems. Journal of Applied Polymer Science, 57 (4). pp. 401-411.

Rao, RMVGK and Kumari, Shylaja and Raju, Suresh K (1995) Moisture Diffusion Behaviour of T300-914C Laminates. Journal of Reinforced Plastics and Composites, 14 (5). pp. 513-522. ISSN 0731-6844

Padma, A and Rao, RMVGK and Subramaniam, C (1994) Liquid elastomer for epoxy resin toughening. High Performance Polymers, 6 (1). pp. 63-70.

Padma, A and Rao, RMVGK and Subramaniam, C (1994) Structural modification of epoxy resins by a liquid elastomer. High Performance Polymers, 6 (1). pp. 71-81.

Natarajan, Kandasamy and Rao, RMVGK (1994) Toughening studies on an ABS/PC blend-modified epoxy resin system. High Performance Polymer, 6 . pp. 241-248. ISSN 0954-0083

Rao, RMVGK and Padma, A and Subramaniam, C (1994) A liquid elastomer for epoxy resin toughening. High Performance Polymer, 6 (1). pp. 63-70. ISSN 0954-0083

Rao, RMVGK and Padma, A and Subramaniam, C (1994) The structural modification of epoxy resins by a liquid elastomer. High Performance Polymer, 6 (1). pp. 71-81. ISSN 0954-0083

Rao, RMVGK and Padma, A and Patel, HS (1992) Kinetic Studies on Epoxy Resins Cured with a Novel Polyamine. High Performance Polymer, 4 (1). pp. 41-48. ISSN 0954-0083

Chandra, Sarath D and Rao, RMVGK and Kishore, - (1991) Effect of Sic particles on compressive strength and glass /phenolic composites fracture features of glass phenolic composites13;. Scripta Metallurgica et Materialia, Vol.25 . pp. 1641-1646. ISSN 1359-6462

Rao, RMVGK and Kaushal, SC and Tankala, K (1991) Some hygrothermal effects on the mechanical behaviour and fractography of glass-epoxy composites with modified interface. Journal of Materials, 26 . pp. 6293-6299.

Giridhar, J and Kishore, . and Rao, RMVGK (1986) Moisture Absorption Characteristics of Natural Fibre Composites. Journal of Reinforced Plastics and Composites, 5 . pp. 141-150. ISSN 0731-6844

Gopalan, R and Rao, RMVGK and Murthy, MVV and Dattaguru, B (1986) Diffusion studies on advanced fibre hybrid composites. Journal of Reinforced Plastics and Composites, 5 (1). pp. 51-61. ISSN 0731-6844

Rao, RMVGK and Chanda, Manas and Balasubramanian, N (1984) Factors Mfecting Moisture Absorption in Polymer Composites13; Part ll: Influence of External Factors. Journal of Reinforced Plastics and Composites, 3 . pp. 246-253. ISSN 0731-6844

Rao, RMVGK and Balasubramanian, N and Manas, Chanda (1984) Factors affecting moisture absorption in polymer composites. I - Influence of internal factors. II - Influence of external factors. Journal of Reinforced Plastics and Composites, 3 . pp. 232-253.

Shukla, Arvind and Rao, RMVGK (1984) Curing Studies on Modified Epoxy and Unsaturated Polyester Resins. Journal of Applied Polymer Science, 29 . pp. 1553-1558. ISSN 0360-6834

Rao, RMVGK and Balasubramanian, N (1984) Hygrothermal effects on the fracture of coated and uncoated polymer-composites. Advances in Fracture Research, 4 . pp. 2989-2996.

Rao, RMVGK and Chanda, M and Balasubramanian, N (1983) A Fickian diffusion model for permeable fibre polymer composites. Journal of Reinforced Plastics and Composites, 2 . pp. 289-299. ISSN 0731-6844

Ramesh, R and Kishore, - and Rao, RMVGK (1983) Dry wear studies on glass-fibre reinforced epoxy composites. Wear, 89 . pp. 131-136.

Kishore, R. Mohan and Shridhar, MK and Rao, RMVGK (1983) xFEFF;Compressive strength of jute-glass hybrid fibre composites 13;. Journal of Material Science Letters, 2 . pp. 99-102. ISSN 0261-8028

Rao, RMVGK and Balasubramanian, N (1981) Moisture absorption phenomenon in permeable fiber polymer composites. Journal of Applied Polymer Science, 26 . pp. 4069-4079. ISSN 0360-6834

Rao, RMVGK and Pourassamy, A (1976) Studies on the curing of a loaded unsaturated polyester binder. Polymer, 17 . pp. 611-612.

Pai, Raghavendra and Kamath, MS and Rao, RMVGK Acid Resistance of glass fibre composites with Different layup sequences Part-II Degradation studies. Journal of Reinforced Plastics and Composites, 16 (11). pp. 1013-1019. ISSN 0731-6844

Patent

CSIR (2008) A process for the manufacture of translucent structural composite components. 226549.

Rao, RMVGK et al. (2008) A process for shaping thermoplastic sheets for wing shields / Windows for vehicles using an unique using an unique vacuum technique. 216783.

Proj.Doc/Technical Report

Sugun, BS and Rao, RMVGK (2007) Feasibility studies on Fiber Metal Laminates (FML) - An approach towards economic production for Industrial Application. Technical Report. National Aerospace Laboratories, Bangalore, India.

Srihari, Shylaja and Vanaja, A and Prakash, M.Rajendra and Sugun, BS and Revathi, A and Kavitha, - and Rao, Sandhya and Murugan, Senthil and Chandrakala, - and Rao, RMVGK (2007) Industrial Test Services - COMPAC Program. Technical Report. National Aerospace Laboratories, Bangalore, India.

Vanaja, A and Rao, RMVGK (2007) Commissioning of a Contolled Strain Rheometer Equipment for Characterisation of Polymers , Pre-pregs and Composites. Documentation. National Aerospace Laboratories, Bangalore.

Vanaja, A and Rao, RMVGK (2007) Commissioning of a controlled strain rheometer equipment for characterization of Polymers, Prepregs and composites. Technical Report. National Aerospace Laboratories, Bangalore, India.

Kumar, K. Mohan and Srikanth, L and Surendra, C and Rahul Kumar, C and Rao, RMVGK (2007) Metallisation of CFRP components for SATCOM applications (ISRO-SAC). Technical Report. National Aerospace Laboratories, Bangalore, India.

Prakash, M. Rajendra and Murgan, Senthil and Rao, RMVGK (2007) NDT and Post Cure Report on HANSA-3 Aircraft Composite Components - Sl.No. 011. Project Report. National Aerospace Laboratories, Bangalore.

Prakash, M.Rajendra and Murugan, Senthil and Rao, RMVGK (2007) Post curing and NDT support services for HANSA-3 Aircraft (coded-011) series productionisation program. Technical Report. National Aerospace Laboratories, Bangalore, India.

Samiullah, TH and Vanaja, A and Rao, Sandhya and Kavitha, - and Chandrakala, - and Rao, RMVGK (2007) Some Engineering Solutions for Large Scale Production of Polyurethene foam (PUF) Panels (Mark II Radome Development). Technical Report. National Aerospace Laboratories, Bangalore, India.

Prakash, M. Rajendra and Rao, RMVGK (2007) On Field Inspection of HANSA-3 Aircraft (VT-HNS) at IIT - Kanpur. Project Report. National Aerospace Laboratories, Bangalore.

Prakash, M.Rajendra and Rao, RMVGK (2007) On field inspection of HANSA-3 Aircraft (VTHNS) at IIT Kanpur. Technical Report. National Aerospace Laboratories, Bangalore, India.

Srihari, Shylaja and Revathi, A and Murugan, M. Sendil and Rao, RMVGK (2007) Combined Altitude Temperature and Humidity Testing of the Solid State Flight Data Recorder (Ssfdr) for the Su-30 MKI Aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Mohan Kumar, K and Srikanth, L and Surendra, C and Rahul Kumar, C and Rao, RMVGK (2007) Development of Tooling and CFRP components for SATCOM applications (ISRO-SAC). Technical Report. National Aerospace Laboratories, Bangalore, India.

Chandrakala, K and Vanaja, A and Rao, RMVGK (2007) SOME PRELIMINARY STUDIES ON THE SHELF LIFE OF RT CURE GLASS-EPOXY PREPREG. Project Report. National Aerospace Laboratories, Bangalore.

Vanaja, A and Padmavathi, T and Jyotsna, T.S and Rao, RMVGK (2006) RADOME PAINT INDIGENISATION-SOME INITIATIVES. Project Report. National Aerospace Laboratories, Bangalore.

Vanaja, A and Padmavathi, T and Jyotsna, T.S and Rao, RMVGK (2006) Radome Paint Indigenisation - Some Initiatives. Technical Report. National Aerospace Laboratories, Bangalore, India.

Srihari, Shylaja and Revathi, A and Murugan, M. Sendil and Rao, RMVGK (2006) CONDITIONING AND QUALIFYING A MICROWAVE - BIT (BUILT IN TEST) UNIT FOR USE IN THE TARANG SYSTEM [END USER-IAF]. Project Report. National Aerospace Laboratories, Bangalore.

Srihari, Shylaja and Revathi, A and Murugan, M. Sendil and Rao, RMVGK (2006) Conditioning and qualifying a microwave - BIT (Built in test) unit for use in the Tarang system [End User - IAF]. Technical Report. National Aerospace Laboratories, Bangalore, India.

Srihari, Shylaja and Revathi, A and Murugan, M. Sendil and Rao, RMVGK (2006) Environmental Qualification of Buffer Amplifier Unit Using CATH Test Facility for SARAS Aircraft Program. Project Report. National Aerospace Laboratories, Bangalore.

Mohan Kumar, K and Surendra, C and Rahul Kumar, C and Rao, RMVGK (2006) ACS Dome-Installation. Project Report. National Aerospace Laboratories, Bangalore.

Surendra, C and Rahul Kumar, C and Mohan Kumar, K and Rao, RMVGK (2006) CFRP Composite Components for SATCOM Programme. Project Report. National Aerospace Laboratories, Bangalore.

Sugun, BS and Rao, RMVGK (2006) DROP WEIGHT IMPACT TESTS ON T-800 CAI TEST SPECIMENS FOR LCA PROGRAMME. Project Report. National Aerospace Laboratories, Bangalore.

Vanaja, A and Rao, Sandhya and Rao, RMVGK (2006) Installation and commissioning of conveyor-type microwave cure equipment at FRP. Project Report. National Aerospace Laboratories, Bangalore.

Sugun, BS and Rao, RMVGK (2006) Preliminary studies on glare composites. Project Report. National Aerospace Laboratories, Bangalore.

Srihari, Shylaja and Revathi, A and Prakash, M.Rajendra and Samiullah, TH and Murugan, Sendil and Rao, RMVGK (2006) Qualification Approach for Airborne Radomes (TDF Antenna Fairings (Radomes) of TU-142M aircraft). Project Report. National Aerospace Laboratories, Bangalore.

Prakash, M.Rajendra and Murugan, Senthil and Rao, RMVGK (2006) HANSA-3 aircraft series productionisation program-support services (Postcure and NDT qualification). Project Report. National Aerospace Laboratories, Bangalore.

Samiullah, TH and Rao, RMVGK (2006) Fabrication Highlights of 12.88m dia Mark-II Radome panels for ISRAD-1SRO. Project Report. National Aerospace LAboratories, Bangalore.

Samiullah, TH and Rao, RMVGK (2006) Fabrication highlights of TDF antenna fairings (radomes) for the HIOMI TU- 142 aircraft for CABS (SANGRAHA program of Indian Navy). Project Report. National Aerospace Laboratories, Bangalore.

Kumar, Mohan and Samiullah, TH and Rao, RMVGK (2006) Fabrication highlights of domes for the Air Combat Simulator (ACS) for ARDC (HAL)/IAF. Project Report. National Aerospace Laboratories, Bangalore.

Samiullah, TH and Prakash, M.Rajendra and Murugan, Senthil and Rao, RMVGK (2006) HANSA-3 aircraft series productionisation program - Damage repairs. Project Report. National Aerospace Laboratories, Bangalore.

Srihari, Shylaja and Vanaja, A and Prakash, M.Rajendra and Sugun, BS and Revathi, A and Kavitha, - and Rao, Sandhya and Murugan, Sendil and Chandrakala, - and Rao, RMVGK (2006) Industrial test services COMPAC Programme. Project Report. National Aerospace Laboratories, Bangalore.

Prakash, M.Rajendra and Rao, RMVGK (2006) NDT and Post Curing of Composite Airframe Components of HANSA-3 Production Aircraft (VT-HOC and TH-001). Project Report. National Aerospace Laboratories, Bangalore.

Samiullah, TH and Rao, RMVGK (2006) On site maintenance support for 300 KW wind turbine at Kethanur, Coimbatore. Project Report. National Aerospace Laboratories, Bangalore.

Samiullah, TH and Prakash, M.Rajendra and Rao, RMVGK (2006) Quality monitoring of Mark-II doppler weather radar (DWR) radome panels. Project Report. National Aerospace Laboratories, Bangalore.

Sugun, BS and Rao, RMVGK (2006) Some Approaches for Evaluation of Impact Energy Absorption in Composites for Civil Aircraft Applications. Project Report. National Aerospace Laboratories, Bangalore.

Srihari, Shylaja and Vanaja, A and Prakash, M.Rajendra and Revathi, A and Kavitha, - and Chandrakala, - and Rao, RMVGK (2006) Test Services Support For Sponsored/In-house Projects and the Industry (COMPAC Program 2004-2005). Project Report. National Aerospace Laboratories, Bangalore.

Kumar, Mohan and Samiullah, TH and Rao, RMVGK (2006) Tooling development of domes for the Air Combat Simulator (ACS)for ARDC (HAL)/IAF. Project Report. National Aerospace Laboratories, Bangalore.

Samiullah, TH and Prakash, M.Rajendra and Rao, RMVGK (2006) Mechanical design data generation for wind mill turbine blade-11.5 mts (300 KW). Project Report. National Aerospace Laboratories, Bangalore.

Rao, RMVGK and Kavitha, - and Vanaja, A (2006) Glass Transition Temperture (Tg) Measurements on Test Laminates Used in HANSA-3 Prototype II Development (Post curing Effect). Project Report. National Aerospace Laboratories, Bangalore.

Srihari, Shylaja and Revathi, A and Murugan, M. Sendil and Rao, RMVGK (2005) Environmental Conditioning Composites and Components for Aerospace and Allied Fields. Project Report. National Aerospace Laboratories, Bangalore.

Mohan Kumar, K and Rao, RMVGK (2004) Safety of Flight Tests on Jaguar Nose Radome -Prototype - A Report. Technical Report. NAL, Bangalore.

Rajendra Prakash, M and Sendil, Murgan and Rao, RMVGK (2004) Post Curing of Hansa -3 (VT-HNX) Components. Project Report. National Aerospace Laboratories, Bangalore.

Rajendra Prakash, M and Shylaja, Srihari and Vanaja, A and Ravathi , A and Sandhya, Rao and Kavitha, - and Chandrakala, - and Rao, RMVGK (2004) A Report of Industrial Test Services Under Compac Programme From April 2003 - March 2004. Technical Report. NAL, Bangalore.

Samiullah, TH and Rao, RMVGK (2004) Development and Fabrication of Composite Tooling for the DWR Mark-Ii RADOME. Technical Report. NAL, Bangalore.

Rajendra, Prakash and Rao, RMVGK (2004) NDT Report on Hansa -3 (VT -HNX). Project Report. National Aerospace Laboratories, Bangalore.

Rajendra Prakash, M and Rao, RMVGK (2004) NDT Test Report On Hansa-3 Aircraft Composite' Components:I (VT-HNX). Technical Report. NAL, Bangalore.

Mohan Kumar, K and Rahul Kumar, C and Srikanth, L and Rao, RMVGK (2004) Fabrication Of FRP Fuel Tank By Filament Winding Method. Technical Report. NAL, Bangalore.

Padmavathi, T and Jyotsna, T.S and Rao, RMVGK (2004) Optimisation Of Processing Parameters Of Resin System In Development Of Adf Radome Fairings For Tu-142m Aircraft. Technical Report. NAL, Bangalore.

Shylaja, Srihari and Revathi, A and Sendil, Murgan and Rao, RMVGK (2004) Conditioning Of Hand Pump Filter Unit To-•Helicopter Division, Hal. Technical Report. NAL, Bangalore.

Samiullah, TH and Rao, RMVGK (2004) Development Of Spar Mould Of A 11.5m Gfrp Wind Mill Power Turbine Blade(300 Kw). Technical Report. NAL, Bangalore .

Kumar, Mohan and Rao, RMVGK (2003) Fabrication Technology for the development of Nose Cone Radome for the Jaguar Maritime Aircraft. Project Report. NAL, Bangalore.

Revathi, A and Rao, RMVGK (2003) Fibre Weight Fraction Measurements on Travel Coupons of Nose Cone Radome for Jaguar Maritime Aircraft. Project Report. NAL, Bangalore.

Vanaja, A and Rao, Sandhya and Rao, RMVGK (2003) Glass Transition Temperature (T,) measurements on travel coupons of Nose Cone Radome for Jaguar Maritime Aircraft. Project Report. NAL, Bangalore.

Prakash, M.Rajendra and Rao, RMVGK (2003) NDT report on the Nose Cone Radome for Jaguar Maritime Aircraft. Project Report. NAL, Bangalore.

Rajendra Prakash, M and Rao, RMVGK (2003) NDT report on the Nose Cone Radome for Jaguar Maritime Aircraft. Technical Report. NAL, Bangalore.

Rao, Sandhya and Rao, RMVGK (2003) IR radiation cure studies of Bi-functional epoxy resin systems. Project Report. National Aerospace LAboratories, Bangalore.

Prakash, M.Rajendra and Srihari, Shylaja and Kavitha, and Vanaja, A and Revathi, A and Rao, Sandhya and Rao, RMVGK (2003) A report on Industrial test services under the COMPAC program from 2002-2003. Project Report. National Aerospace LAboratories, Bangalore.

Kumar, Mohan and Rao, RMVGK (2003) Fabrication Technology for the development of Nose Radome for the Saras Aircraft. Project Report. NAL, Bangalore.

Mohan, Kumar and Rao, RMVGK (2003) Fabrication Technology for the development of Nose Radome for the Saras Aircraft. Technical Report. NAL, Bangalore.

Prakash, M.Rajendra and Rao, RMVGK (2003) NDT report on Hansa-3 (VT- HNW) aircraft Components. Project Report. National Aerospace LAboratories, Bangalore.

Prakash, M.Rajendra and Kumar, K. Mohan and Pasupathi, K and Rao, RMVGK (2003) Post curing of Hansa-3 (VT- HNW) Components. Project Report. National Aerospace LAboratories, Bangalore.

Rajendra Prakash, M and Mohan Kumar, K and Pasupathi, R and Rao, RMVGK (2003) Post curing of Hansa-3 (VT- HNW) Components. Technical Report. NAL, Bangalore.

Rajendra Prakash, M and Revathi, A and Chandrakala, - and Rao, RMVGK (2003) Material Characterization of the Radome Fairings (TDF & ADF ) for HONE TU-142M Aircraft. Technical Report. NAL, Bangalore.

Prakash, M.Rajendra and Revathi, A and Chandrakala, and Rao, RMVGK (2003) Material Characterization of the Radome Fairings (TDF & ADF) for HOMI TU-142M Aircraft. Project Report. NAL, Bangalore.

Samiullah, TH and Rao, RMVGK (2003) Development of a 7sq.m large PUF core panel for realization of Mark-I1 Radome for DWR. Project Report. National Aerospace LAboratories, Bangalore.

Samiullah, TH and Rao, RMVGK (2003) Fabrication of PV2-GE Air Intake Ducts for 1 :7 .645 and 1 :4 .405 scale LCA Kaveri Air Intake Models. Technical Report. NAL, Bangalore.

Samiullah, TH and Rao, RMVGK (2003) Fabrication of PV2-GE Air Intake Ducts for 1:7.645 and 1:4.405 scale LCA Kaveri Air Intake Models. Project Report. National Aerospace LAboratories, Bangalore.

Sugun, BS and Srikanth, L and Rao, RMVGK and Venkatasubramanyam, D.V and Swamy, E.Govindaraju (2003) Installation, Re-commisioning of the 100 carrier Braiding Machine. Project Report. National Aerospace LAboratories, Bangalore.

Samiullah, TH and Rao, RMVGK (2003) Pattern and Tooling Development for the Radome Fairings (TDF & ADF ) for HOMI TU- 142M Aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Vanaja, A and Rao, Sandhya and Rao, RMVGK (2003) Glass Transition Temperature (T g) measurements on travel coupons of Nose Cone Radome for Jaguar Maritime Aircraft. Technical Report. NAL, Bangalore.

Rao, RMVGK and Vanaja, A and Sandhya, Rao (2001) Therma Material Characterisation of Ceramic Samples Used in C-Radome Programme. Project Report. National Aerospace Laboratories, Bangalore.

Rao, RMVGK and Navaneetha, S and Padmavathi, T and Kavitha, - (2001) Material Acceptance Quality Monitoring and Storage of Materials for Composite Component Fabrication. Project Report. National Aerospace Laboratories, Bangalore.

Dash, PK and Jha, RM and Kannan, TS and Krishnamoorthy, V and Rao, RMVGK and Shembharkar, TR and Venkatasubramanyam, DV and Vishwanath, S (2000) A Status Report of the Studies on the Design and Development of C-Radome. Project Report. CSIR-NAL, Bangalore, National Aerospace Laboratories.

Rao, RMVGK and Rajendra Prakash, M (1999) Comparative Evaluation Studies on Glass Micro (Imported) Vs-Erosil Powder (Indigeneous)used in the Development of Hansa Aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Sajeer, Ahmed and Venkatasuramanyam, DV and Rao, RMVGK (1997) Preparation Of 1 :4.405 And 1 :7.645 Scale LCA Air Intake Models For Tests at ONERA. Technical Report. NAL, Bangalore.

Rao, RMVGK and Kavitha, and Vanaja, A and Sandhya, Rao and Revathi, A (1997) Quality Control and Characterisation of Epoxy Resin and Ahesive System Used in HANSA-3 Prototype II Aircraft Fabrication. Project Report. National Aerospace Laboratories, Bangalore.

Rao, RMVGK and Kavitha, - and Vanaja, A and Shylaja, Srihari (1997) Studies on Fire Protection Scheme for Engine Bulkhead of HANSA-3 Prototype Aircraft. Project Report. National Aerospace Laboratories, Bangalore.

Rao, RMVGK and Padma, A and Vishnubhat, and Rajendra, Prakash and Kavitha, and Vanaja, A (1996) Comparative Evaluation of different Resin Batches used in HANSA-3 (old Vs-New Batches). Project Report. National Aerospace Laboratories, Bangalore.

Rao, RMVGK and Kavitha, and Shylaja, Srihari and Vanaja, A (1996) Hygrothermal conditining of Glass Epoxy and Carbon Epoxy composite specimens used for Hanssa-3 Program (for generation of hotwet allowables by SID). Project Report. National Aerospace Laboratories, Bangalore.

Rao, RMVGK and Padma, A and Rao, VVS and Kavitha, A and Vanaja, A (1996) Quality Control and characterisation of LY5052/HY5052 Resin system used in HANSA 3 aircraft Fabrication. Project Report. National Aerospace Laboratories, Bangalore.

Rao, RMVGK (1993) Fibre Reinforced Plastics (FRP), Materials, Fabrication and Applications EDP in FRP Moulding. Project Report. National Aerospace Laboratories, Bangalore.

Rao, RMVGK and Rao, VVS and Subramanian, C (1993) Dynamic Mechanical characterisation of autoclave Cured & Oven cured Glass Epoxy Prepregs for Use in the Rotodome Construction. Project Report. National Aerospace Laboratories, Bangalore.

Balasubramaniam, TS and Rao, RMVGK (1991) Generation of preliminary design data on basic composite materials used in the NAL light aircraft (NALLA) phase I. Technical Report. National Aerospace Laboratories, Bangalore, India.

Rao, RMVGK (1991) Composite materials indigenisation for FRP - Air crafts. Technical Report. National Aerospace Laboratories, Bangalore, India.

Rao, RMVGK (1990) Composite Lay Up Studies for NAL - Light Trainer Aircraft Wings. Project Report. National Aerospace Laboratories, Bangalore.

Rao, RMVGK (1988) Plant irrigation using FRP porous tubes: Interim report to KSCST. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Rao, RMVGK and Pourassamy, A (1975) Studies on the curing of loaded polyster binder. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Padmavathi, T and Jyotsna, T.S and Rao, RMVGK DEVELOPMENT OF SPECIALITY RESINS FOR RADOME APPLICATIONS. Project Report. National Aerospace Laboratories, Bangalore.

Kumar, K. Mohan and Srikanth, L and Surendra, C and Kumar, C. Rahul and Rao, RMVGK Development of Tooling and CFRP Components for SATCOM Application (ISRO-SAC). Project Report. National Aerospace Laboratories, Bangalore.

Vanaja, A and Rao, RMVGK Developmental studies on High temperature bis-maleimide resin Composites. Project Report. National Aerospace Laboratories, Bangalore.

Rao, Sandhya and Rao, RMVGK Radiation Cuaring Studies on Polymer Matrices and Composites. Project Report. National Aerospace Laboratories, Bangalore.

Vanaja, A and Padmavathi, T and Rao, RMVGK Studies on toughened Phenolic resin matrices for high performance composite applications. Project Report. National Aerospace Laboratories, Bangalore.

This list was generated on Sat Dec 20 02:12:41 2014 IST.