Items where Author is "Dayananda, GN"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 51.

Conference or Workshop Item

Senthilkumar, P and Jayasankar, S and Satisha, Vishwanath and Kamaleshaiah, M.S. and Prashanth, N.S. and Alfred , Paulsingh and Dayananda, GN (2011) Development and Wind Tunnel Evaluation of an SMA Based Trim Tab Actuator for a Civil Aircraft. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore.

Senthil Kumar, P and Jayasankar, S and Kamaleshiah, MS and Prashanth, N.S. and Paulsingh, Alfred and Dayananda, GN (2011) Development and Wind Tunnel Evaluation of a SMA Based Trim Tab Actuator for a Civil Aircraft. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2011), November 16-18, 2011, Bangalore, India.

Thulasi Durai, D and Viswamurthy , SR and Vinoth, M and Balasubramaniam, - and Mohan, Kumar M and Dayananda, GN (2011) Development of a damage tolerant truss based composite empennage box. In: Proceedings of XII NASAS, 23-24, Sept 2011, IIT, Kanpur, India.

Thulasi Durai, D and Viswamurthy , SR and Byji, Varughese and Dayananda, GN and Subrahmanya, MB and Kulkarni, DS and Rajani, BN and Mathur, JS (2009) Optimized construction of a composite MAV wing using CFD analysis. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD 2009), 10-12 December 2009, Bangalore.

Dayananda, GN and Kamalakannan, GM and Senthil Kumar, P and Jayasankar, S and Satisha, - (2009) A smart material based approach to morphing. In: MAV Workshop- Challenges and Presferred Outcomes, 13 November 2008, National Aerospace Laboratories.

Dayananda, GN and Kamalakannan, GM and Kumar, Senthil P and Jayasankar, S and Satisha, - (2008) A smart material based approach to morphing. In: Proceedings of the Indo-US Workshop on Micro Air Vehicles, 13-14 Nov 2008, Bangalore, India.

Varughese, Byji and Dayananda, GN and Subba Rao, M (2008) Modeling the behaviour of an advanced material based smart landing gear system for aerospace vehicles. In: International Workshop on quot;Smart deeling of Material Systems (SDMoMS'08), Jan 2008, Chennai, India.

Durai, Thulasi D and Venkatesh, S and Varughese, Byji and Ramanaiah, B and Dayananda, GN (2008) Concepts for truss based aerofoil construction. In: ISAMPE National Conference on Composites : INCCOM-7, 4-5 Dec 2008, Bangalore, India.

Ramaswamy, Setty J and Dayananda, GN and Subba Rao, M (2007) Development of a Door Steering Mechanism for a Large Autoclave. In: National Conference on Recent Advances in Design Engineering, 22-24 Feb 2007, Manipal.

Jayasankar, S and Dayananda, GN and Subbarao, M (2007) Hybrid Composites for Morphing Applications. In: 15th National Conference on Aerospace Structures, 15-16 Oct 2007, Coimbatore, Tamil Nadu, India.

Kamath, GM and Dayananda, GN and Senthilpriya, R (2002) A modified thermo-mechanical modeling approach for shape memory alloy behaviour13;. In: Proceedings of SPIE - The International Society for Optical Engineering, 12-14 Dec 2002, Bangalore, India.

Shankar, V and Dayananda, GN and Kumar, Senthil P and Subba Rao, M and Balasubramaniam, R (2002) Development of electronic actuation system for shape-memory-alloy-based aerospace structures. In: Conference on Smart Materials, Structures and Systems, 12-14 Dec 2002, Bangalore, India.

Kamath, GM and Dayananda, GN and Senthilpriya, R (2002) A modified thermomechanical modeling approach for shape memory alloy behaviour. In: Conference on Smart Materials, Structures and Systems, 12-14 Dec 2002, Bangalore, India.

Shankar, V and Dayananda, GN and Kumar, Senthil P and Rao, Subba M and Balasubramanian, R Development of Electronic actuation system for Shape Memory Alloy. In: International Conference on Smart Materials Structures and Systems December 12-14, 2002, Indian Institute of Science, Bangalore, India, 12-14 Dec 2002, Bangalore, India.

Dayananda, GN and Kumar, Senthil P and Rao, Subba M Development of SMA Based Actuator Mechanisms for Deployment of Control Surfaces. In: International Conference on Smart Materials Structures and Systems, 28-30 July 2005, Bangalore.

Sateesh, VL and Jayasankar, S and Kumar, Senthil P and Raju. S, Gangadhar and Satisha, - and Dayananda, GN FE Simulation of Control Surfaces with SMA Actuators for Small Size Aircrafts. In: Fourth ISSS National Conference on Microsystems, Smart Materials, Structures, ISSS-2010, 30 Sep - 01 Oct 2010, Nagpur.

Jayasankar, S and Dayananda, GN and Varughese, Byji and Kumar, Senthil P SMA Based Adaptive Concept on Wings of Large Civil Aircraft. In: Symposium on Applied Aerodynamics and Design of Aerospace Vehicle (SAROD-2009) December 10-12, 2009, Bangalore, India, 10-12 Dec 2009, Bangalore, India.

Journal Article

Sateesh, VL and Senthilkumar, P and Satisha, Vishwanath and Dayananda, GN (2014) A posteriori processing for estimation of low cycle fatigue failure in SE SMA wires. Materials Science and Engineering A, 594 . pp. 212-217. ISSN 0921-5093

Senthil Kumar, P and Jayasankar, S and Satisha, Vishwanath and Sateesh, VL and Kamaleshiah, MS and Dayananda, GN (2013) Development and wind tunnel evaluation of an SMA based trim tab actuator for a civil aircraft. SMART MATERIALS AND STRUCTURES, 22 (9).

Revathi, A and Rao, Sandhya and Kavitha, Rao V and Singh, MM and Sendil, Murugan M and Shylaja, Srihari and Dayananda, GN (2013) Effect of strain on the thermomechanical behavior of epoxy based shape memory polymers. Journal of Polymer Research, 20 (113). pp. 1-10. ISSN 1572-8935

Kavitha, and Revathi, A and Sandhya, Rao and Shylaja, Srihari and Dayananda, GN (2012) Characterization of shape memory behavior of CTBN-epoxy resin system. Journal of Polymer Research, 19 . pp. 1-7.

Kavitha, and Revathi, A and Sandhya, Rao and Shylaja, Srihari and Dayananda, GN (2012) Characterization of shape memory behaviour of CTBN-epoxy resin system. J of Polymer Research, 19 (9894).

Senthilkumar, P and Dayananda, GN and Umapathy, M and Shankar, V (2012) Experimental Evaluation of a Shape Memory Alloy Wire Actuator with a Modulated Adaptive Controller For Position Control. Smart Materials and Structures, 21 (1). ISSN 0964-1726

Jayasankar, S and Senthil Kumar, P and Varughese, Byji and Ramanaiah, B and Satisha, Vishwanath and Ramachandra, HV and Dayananda, GN (2011) Smart Aerodynamic Surface for a Typical Military Aircraft Using Shape Memory Elements. Journal of Aircraft, 48 (6). pp. 1968-1977. ISSN 0021-8669

Thulasi Durai, D and Viswamurthy , SR and Balasubramani, S and Rohit, C and Dayananda, GN (2010) Grid based construction of a composite micro air vehicle airframe. Journal of Aerospace Sciences and Technologies, 62 (2). pp. 132-140. ISSN 1735-2134

Dayananda, GN and Subba Rao, M (2008) Effect of strain rate on properties of superelastic NiTi thin wires. Materials Science and Engineering: A Struct. Mater., 486 (1-2). pp. 96-103.

Novak, V and Sittner, P and Dayananda, GN and Braz-Fernandes, FM and Mahesh, KK (2008) Electric resistance variation of NiTi shape memory alloy wires in thermomechanical tests: Experiments and simulation. Materials Science and Engineering A . pp. 127-133.

Dayananda, GN and Varughese, B and Subba Rao, M (2007) Shape memory alloy based smart landing gear for an airship. Journal of Aircraft, 44 (5). pp. 1469-1477.

Dayananda, GN and Shankar, V (2003) The design of a Ni-Ti based shape memory alloy actuator. Journal of Aerspace Sciences & Technologies, 55 (4). pp. 268-274.

Upadhya, AR and Dayananda, GN and Kamalakannan, GM and Ramaswamy, Setty J and Daniel, J Christopher Autoclaves for Aerospace Applications: Issues and Challenges. International Journal of Aerospace Engineering .

Proj.Doc/Technical Report

Srikanth, L and Chandran, AP and Kanakamuthu, and Ramaswamy, Setty J and Balamurugan, G and Vinod Kumar, K and Dayananda, GN (2011) Design of Modified Winch System for The NMITLI 500 kw wind turbine system. Project Report. National Aerospace Laboratories, Bangalore.

Srikanth, L and Chandran , AP and Kanakamuthu, and Ramaswamy, Setty J and Balamurugan, G and VinodKumar, K and Dayananda, GN (2011) Modifications of The INMITLI 500 kW Wind Turbine Tower and Gin Pole. Project Report. National Aerospace Laboratories, Bangalore.

Chandran, AP and Kanakamuthu, - and De, Manabendra M and Ashoka, BS and Dayananda, GN (2011) Procedure for commissioning and operation of the NMITLI 500kW Wind turbine system. Technical Report. National Aerospace Laboratories, Bangalore, India.

Srikanth, L and Rajendra, Prakash and Sateesh, VL and Dayananda, GN (2011) Experimental studies On Glass Microballoon Filled Epoxy Composites. Project Report. National Aerospace Laboratories, Bangalore.

Jayasankar, S and Senthil Kumar, P and Kamaleshiah, MS and Satisha, - and Prashanth, NS and Sateesh, VL and Alfred Paul, Singh and Gangadhar, S and Dayananda, GN (2010) Development of SMA Based Smart Trimming Surface for Typical Civil Aircraft Applications. Project Report. National Aerospace Laboratories, Bangalore.

Ramaswamy, Setty J and Venkatesh, S and Dayananda, GN and Daniel, J Christopher and Varughese, Byji (2009) Mechanical Design Aspects of 4.9 m Dia., 13 m Length Computer Controlled Autoclave. Project Report. National Aerospace Laboratories.

Dayananda, GN and Senthil Kumar, P and Ramachandra , HV and Jayasankar, S and Satisha, - (2009) Inve~tigation~oThf ermo-Mechanical Characteristics of Thin Shape Memory Alloy (Ni-Ti) Wires. Project Report. National Aerospace Laboratories, Bangalore.

Ramaswamy, Setty J and Christopher, Daniel and Venkatesh, S and Byji, Varughese and Dayananda, GN (2009) Assembly process sheets for composite co-cured FIN of Tejas-light combat aircraft (LCA). Technical Report. NAL.

Thulasi Durai, D and Venkatesh, S and Byji, Varughese and Ramanaiah, B and Dayananda, GN (2009) Concepts for truss based aerofoil constructions. Technical Report. NAL.

Ramaswamy, Setty J and Dayananda, GN (2009) Design aspects of nitrogen reservoirs. Technical Report. NAL.

Senthil Kumar, P and Dayananda, GN and Saji, D and Kamalakannan, GM and Subba Rao, M (2008) Aircraft Structural Repair Technology Using Smart Actuators. Project Report. National Aerospace Laboratories, Bangalore.

Senthil Kumar, P and Dayananda, GN (2008) High Frequency Actuation and Strain Rate Effects on Thin Shape Memory Alloy Wires. Project Report. National Aerospace Laboratories, Bangalore.

Jayasankar, S and Dayananda, GN and Senthil Kumar, P and Subba Rao, M (2007) tvaluation of Properties of SMA and SMA Embedded 3t.c-1,{*. FRP Beams. Project Report. National Aerospace Laboratories, Bangalore.

Senthil Kumar, P and Dayananda, GN and Kamalakannan, GM and Saji, D and Pruthvi, S and Subba Rao, M (2006) Preliminary Design and Fabrication Report on Repair Technology using Smart Actuators. Project Report. National Aerospace Laboratories, Bangalore.

Jayasankar, S and Dayananda, GN and Sandeep, CD and Subba Rao, M (2006) Preliminary Hesign and Fabrication - :a1 of SMA Embedded GFRP Beam . Project Report. National Aerospace Laboratories, Bangalore.

Dayananda, GN and Senthil Kumar, P and Shankar, V (2003) Progress Report of the Project "Development of Mousche using SMA" for the Period January 2003 to November 2003. Project Report. National Aerospace Laboratories, Bangalore.

Dayananda, GN and Shankar, V and Gautam, RK and Senthil Kumar, P (2002) Preliminary Design Report for Automation of Hansa Flap Using SMA. Project Report. National Aerospace Laboratories, Bangalore.

Subba Rao, M and Dayananda, GN (1995) Design Features of Autoclave Sub-Systems. Technical Report. National Aerospace Laboratories, Bangalore, India.

Dayananda, GN and Shankaranarayan, S (1991) Air circulation unit for the 3m Dia x 7m length autoclave -A computer aided design approach. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Dayananda, GN and Subramu, BL and Ningaiah, - (1989) Mechanical design aspects of 3.0 m Dia, 7 m length computer controlled autoclave. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Thesis

Dayananda, GN (2008) NiTi Super Elastic Shape Memory Alloys for Energy Dissipation in Smart Systems for Aerospace Applications. PhD thesis, National Aerospace Laboratories.

This list was generated on Sat Aug 23 03:50:13 2014 IST.