Items where Author is "Balasingh, C"

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Item Type | No Grouping
Number of items: 33.

Conference or Workshop Item

Singh, AK and Balasingh, C and Mao, HK and Hemley, RJ and Duffy, TS (1998) Measurement and analysis of lattice strains in a polycrystalline sample under ultra-high pressure. In: Proceedings of the International School on Power Diffraction, 1998, New Delhi.

Journal Article

Singh, AK and Balasingh, C (2001) X-ray diffraction line broadening under elastic deformation13; of a polycrystalline sample: An elastic-anisotropy effect. Journal of Applied Physics, 90 (5). pp. 2296-2302. ISSN 0021-8979

Singh, AK and Balasingh, C (2000) Lattice strains under megabar pressures. Metals Materials and Processes, 12 (2 amp;). pp. 281-292.

Singh, AK and Balasingh, C (2000) Lattice strains under megabar pressures. Metals Materials And Proceses, 12 (2 & 3). pp. 281-292.

Balasingh, C and Singh, AK (2000) Residual Stresses and Their Measurements by X-Ray Diffraction Methods. Material Science Division, 12 (2 & 3). pp. 269-280.

Balasingh, C and Singh, AK (2000) Residual stresses and their measurements by x-ray diffraction methods. Metals Materials and Processes, 12 (2 amp;). 269 -280.

Singh, AK and Balasingh, C and Mao, Ho-kwang and Hemley, Russell J and Shu, Jinfu (1998) Analysis of lattice strains measured under nonhydrostatic pressure13;. Journal of Applied Physics, 63 (12). pp. 7567-7575.

Singh, AK and Balasingh, C and Mao, HK and Hemley, RJ and Shu, J (1998) Interpretation of lattice strain under non-hydrostatic pressure. Review of High Pressure Science and Technology, 7 . pp. 205-210.

Singh, AK and Balasingh, C (1996) The effect of uniaxial stress component on the lattice strais measured by diffraction method using opposed anvil device: trigonal system. Bulletin of Material Sciences, 19 (3). pp. 601-605.

Singh, AK and Balasingh, C (1994) The lattice strains in a specimen (hexagonal system) compressed nonhydrostatically in an opposed anvil high pressure setup. Journal of Applied Physics, 75 (10). pp. 4956-4962.

Kanakalatha, P and Sridhar, MK and Ajay, Chandra and Balasingh, C and Singh, AK (1990) Preparation and characterization of aluminium alloy sheet aramid fibre-laminated composites. Bulletin of Material Science, 10 . pp. 305-311.

Balasingh, C and Kanakalatha, P and Sridhar, MK and Singh, AK (1989) Residual stresses in aluminum alloy sheet/aramid fiber laminated composites. Indian Journal of Physics, 63A . pp. 262-266.

Vijayan, Kalyani and Mani, A and Balasingh, C and Singh, AK (1988) X-ray analysis of polycrystalline aluminium subjected to fatigue cycling. Bulletin of Material Science, 10 (3). pp. 205-216.

Vijayan, Kalyani and Mani, A and Balasingh, C and Singh, AK (1986) An oscillatory variation of the half-width of x-ray diffraction-line profiles with fatigue cycling. Scripta Metallurgica, 20 . pp. 1767-1770.

Singh, AK and Balasingh, C (1977) Uniaxial stress component in diamond anvil high-pressure x-ray cameras. Journal of Applied physics, 48 (12). pp. 5338-5340.

Singh, AK and Balasingh, C (1973) Sample-curvature error in stress measurement made with an x-ray diffractometer. Journal of Applied Crystallography, 6 . pp. 466-471.

Singh, AK and Balasingh, C (1971) Effect of x-ray diffractometer geometrical factors on the centroid shift of a diffraction line for stress measurement. Journal of Applied Physics, 42 (13). pp. 5254-5260.

Proj.Doc/Technical Report

Barshilia, Harish C and Rajam, KS and Balasingh, C (2000) X-ray diffraction studies of RF magnetron sputtered Cu-Ni superlattices. Technical Report. National Aerospace Laboratories.

Balasingh, C and Singh, Vandana (1996) Measurement of Residual (Curing) Stresses in CFRP Laminates by the X-ray Diffraction Method13; 13;. Technical Report. National Aerospace Laboratories, Bangalore, India.

Singh, AK and Balasingh, C (1996) The Effect of Uniaxial Stress Component on the Lattice Strains Measured by a Diffraction Method Using an opposed Anvil Device: Tetragonal System13;. Technical Report. National Aerospace Laboratories, Bangalore, India.

Singh, AK and Balasingh, C (1996) The effect of Uniaxial component on the lattice strains measured by a diffraction method using opposed anvil device: Trigonal system. Technical Report. National Aerospace Laboratories, Bangalore, India.

Balasingh, C and Gururaja, B and Rohini, S (1993) Residual stress distribution in the As-received aluminum-lithium alloy sheet. Technical Report. National Aerospace Laboratories, Bangalore, India.

Usha Devi, S and Balasingh, C (1993) Retained Austenite in Garret Engine Gears. Technical Report. National Aerospace Laboratories, Bangalore, India.

Balasingh, C and Devi, S Usha and Singh, AK (1992) Residual Stresses in Control Stretched Aluminium Copper Alloy Extrusions. Technical Report. National Aerospace Laboratories, Bangalore, India.

Devi, S Usha and Balasingh, C (1992) XRD Profile Fitting by the Simplex Method. Technical Report. National Aerospace Laboratories, Bangalore, India.

Balasingh, C and Govindarajaswamy, K and Krishnan, A and Raghumurthy, T and Ramesh, TG and Shubha, V and Singh, AK and Subbarayadu, K and Rao, Venkata (1991) Design and fabrication of a mobile x-ray stress 13; diffractometer. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Balasingh, C and Kanakalatha, P and Sridhar, MK and Singh, AK (1988) Residual stresses in aluminium alloy sheet/aramid fiber laminated composites. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Vijayan, Kalyani and Mani, A and Balasingh, C and Singh, AK (1987) X-ray analysis of polycrystalline aluminium subjected to fatigue cycling. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Murthy, V V S and Balasingh, C and Singh, AK (1982) X-ray microbeam technique. Technical Report. National Aeronautical Laboratory, Bangalore,India.

Srinivasan, C and Balasingh, C and Singh, AK (1979) Measurement of thickness of thin films by the x-ray diffraction method. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Balasingh, C and Singh, AK (1971) The variance as a criterion for defocusing in powder diffractometry. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Singh, AK and Balasingh, C (1970) Effect of X-ray diffractometer geometrical factors on the centroid shift of a diffraction line for stress measurement. Technical Report. National Aeronautical Laboratory, Bangalore, India.

Balasingh, C and Singh, AK (1969) Measurement of stress: Photographic method. Technical Report. National Aeronautical Laboratory, Bangalore, India.

This list was generated on Tue Sep 2 02:28:19 2014 IST.