Effect of substrate roughness on the apparent surface free energy of sputter deposited superhydrophobic polytetrafluoroethylene coatings: A comparison of experimental data with different theoretical models

Selvakumar, N and Barshilia, Harish C and Rajam, KS (2010) Effect of substrate roughness on the apparent surface free energy of sputter deposited superhydrophobic polytetrafluoroethylene coatings: A comparison of experimental data with different theoretical models. Journal of Applied Physics, 108. 013505.

[img] PDF
JAPIAU1081013505_1.pdf - Published Version
Restricted to Registered users only

Download (476kB)

Abstract

We have studied the effect of substrate roughness on the wettability and the apparent surface free energy (SFE) of sputter deposited polytetrafluoroethylene (PTFE) coatings deposited on untreated glass (average roughness, Ra = 2.0 nm), plasma etched glass (Ra = 7.4 nm) and sandblasted glass (Ra = 4500 nm) substrates. The wettability of the PTFE coatings deposited on substrates with varying roughnesses was evaluated by measuring the apparent contact angle using a series of probe liquids from non-polar aprotic to polar protic. The wettability measurements indicate that an apparent water contact angle of 152 with a sliding angle of 8 was achieved for PTFE coatings deposited on a substrate with Ra = 4500 nm. The superhydrophobicity observed in these coatings is attributed to the presence of dual scale roughness, densely packed microstructure and the presence of CF3 groups. Unlike the bulk PTFE which is mainly dispersive, the sputter deposited PTFE coatings are expected to have some degree of polar component due to the plasma treatment. In order to calculate the dispersive SFE of PTFE coatings, we have used the Girifalco-Good-Fowkes (GGF) method and validated it with the Zisman model. Furthermore, the Owens-Wendt model has been used to calculate the dispersive and the polar components of the apparent SFE of the PTFE coatings. These results are further corroborated using the Fowkes method. Finally, an “equation of state” theory proposed by Neumann has been used to calculate the apparent SFE values of the PTFE coatings. The results indicate that the apparent SFE values of the PTFE coatings obtained from the Owens-Wendt and the Fowkes methods are comparable to those obtained from the Neumann’s method. The analyses further demonstrate that the GGF and the Zisman methods underestimate the apparent SFE values of the sputter deposited PTFE coatings.

Item Type: Article
Subjects: PHYSICS > Solid-State Physics
Depositing User: Mr N Selvakumar
Date Deposited: 15 Jul 2010 04:45
Last Modified: 15 Jul 2010 04:45
URI: http://nal-ir.nal.res.in/id/eprint/8583

Actions (login required)

View Item View Item